ASME International Publisher

publisher of

• Pointing Tasks using Spatial Audio on Smartphones for People with Vision Impairments.  Journal of Computing and Information Science in Engineering.  23:1-15. 2023
• Designing Hybrid Neural Network Using Physical NeuronsA Case Study of Drill Bit-Rock Interaction Modeling.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  145. 2023
• Discrete-Time Adaptive Fractional Nonlinear Control Using Fuzzy Rules Emulating Networks.  Journal of Computational and Nonlinear Dynamics.  18. 2023
• Impact of Thermal-Hydraulic Feedback and Differential Thermal Expansion on European Sodium-Cooled Fast Reactor Core Power Distribution.  Journal of Nuclear Engineering and Radiation Science.  9. 2023
• On Kinematics in Sequential Three-Dimensional Stretch Bending: Analytical Springback Model 2023
• A Comparison of Graph-Theoretic Approaches for Resilient System of Systems Design.  Journal of Computing and Information Science in Engineering.  23. 2023
• Coupling of Volumetric Flowfield and Surface Effectiveness Measurements for Flat-Plate Film Cooling With Cylindrical Holes Using Tomographic Particle Image Velocimetry and Pressure-Sensitive Paint.  Journal of Thermal Science and Engineering Applications.  15. 2023
• Effect of a Reduced Oil Flow Rate on the Static and Dynamic Performance of a Tilting Pad Journal Bearing Running in Both the Flooded and Evacuated Conditions 2023
• Property-Graded Stainless Steel 316L by Selective Laser Melting: Characterization & Design 2023
• Reflect-Express-Transform: Investigating Speech-Based Iterative Digital Design for Young Designers.  Journal of Computing and Information Science in Engineering.  23. 2023
• The Effects of Plasma Pre-Cracking on Drilling of Hard Rocks: A Single Insert Cutting Experiment 2023
• Vibration Signal-Assisted Endpoint Detection for Long-Stretch, Ultraprecision Polishing Processes 2023
• Evaluating Designer Learning and Performance in Interactive Deep Generative Design.  Journal of Mechanical Design.  145. 2023
• Experimental Force Coefficients for a Fully-Partitioned Pocket Damper Seal and Comparison to Other Two Seal Types 2023
• A Model and Experimental Validation for a Piston RingsSqueeze Film Damper: A Step Toward Quantifying Air Ingestion 2023
• Optimized Film Cooling Flow on a Contoured Endwall Within a Transonic Annular Cascade.  Journal of Thermal Science and Engineering Applications.  15. 2023
• Spatial Manipulation in Virtual Peripersonal Space: A Study of Motor Strategies.  Journal of Computing and Information Science in Engineering.  23. 2023
• An Algorithm for Multi-Objective Efficient Parametric Optimization.  Journal of Mechanical Design.  145. 2023
• Characterization of an Apparatus to Study Solid Deposit Formation in Lubricating Oils at High Temperatures.  Journal of Turbomachinery.  145. 2023
• Effects of Jet-to-Target Surface Spacing and Pin-Fin Height on Jet Impingement Heat Transfer in a Rectangular Channel.  Journal of Thermal Science and Engineering Applications.  15. 2023
• Measured Leakage and Rotordynamic Force Coefficients for Two Liquid Annular Seal Configurations: Smooth-Rotor/Grooved-Stator Versus Grooved-Rotor/Smooth-Stator 2023
• Automated flow pattern recognition for liquid-liquid flow in horizontal pipes using machine-learning algorithms and weighted majority voting 2023
• Effects of Blowing and Density Ratios on Unsteady Film Cooling Effectiveness Using Fast-Response Pressure-Sensitive Paint.  Journal of Thermal Science and Engineering Applications.  15. 2023
• Heat Transfer and Friction in a Rectangular Channel With Varying Numbers of Walls Roughened With 90-Deg Transverse or 45-Deg V-Shaped Ribs 2023
• Heat Transfer in a Rotating, Blade-Shaped, Two-Pass Cooling Channel With Various 45-Deg Rib Turbulators and a Tip Turning Vane.  Journal of Thermal Science and Engineering Applications.  15. 2023
• High-Pressure Laminar Flame Speeds and Markstein Lengths of Syngas Flames Diluted in Carbon Dioxide and Helium.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  145. 2023
• A Stepped Shaft Labyrinth Seal Verses A Pocket Damper Seal: Leakage and Dynamic Force Coefficients Under Wet Gas Operation 2023
• Bio-Inspired Avenues for Advancing Brain Injury Prevention.  Journal of Mechanical Design.  144. 2022
• Making-a-Scene: A Preliminary Case Study on Speech-Based 3D Shape Exploration Through Scene Modeling.  Journal of Computing and Information Science in Engineering.  22. 2022
• Binder Jetting Additive Manufacturing: The Effect of Feed Region Density on Resultant Densities 2022
• Characterization of the Flow and Surface Temperature Around Multiple Vortex Generators.  Journal of Fluids Engineering.  144. 2022
• Heat Transfer in Rotating, Trailing Edge, Converging Channels With Full- and Partial-Height Strip-Fins.  Journal of Turbomachinery.  144. 2022
• Heat Transfer in a Rotating, Blade-Shaped, Two-Pass Cooling Channel With Various 45-Deg Rib Orientations.  Journal of Thermal Science and Engineering Applications.  14. 2022
• On the Fabrication of Defect-Free Nickel-Rich Nickel-Titanium Parts Using Laser Powder Bed Fusion 2022
• A Nonlinear Rotordynamics Model for Automotive Turbochargers Coupled to a Physical Model for A (Semi) Floating Ring Bearing System 2022
• Aiding Airway Obstruction Diagnosis With Computational Fluid Dynamics and Convolutional Neural Network: A New Perspective and Numerical Case Study.  Journal of Fluids Engineering.  144. 2022
• Bioinspiration of Product Architecture: Trading-Off System Effectiveness for System Robustness.  Journal of Mechanical Design.  144. 2022
• The Elephant in the Cell: Nuclear Mechanics and Mechanobiology..  Journal of Biomechanical Engineering.  144:080802. 2022
• Amphiphilic Zirconium Phosphate Nanoparticles as Tribo-Catalytic Additives of Multi-Performance Lubricants.  Journal of Tribology.  144. 2022
• Binder Jetting and Infiltration of Metal Matrix Nanocomposites 2022
• Influence of Coolant Density on Turbine Blade Tip Film Cooling at Transonic Cascade Flow Conditions Using the Pressure-Sensitive Paint Technique.  Journal of Thermal Science and Engineering Applications.  14. 2022
• Ink Rheology Regulates Stability of Bioprinted Strands..  Journal of Biomechanical Engineering.  144:074503. 2022
• Parametric Study and Correlation of Racetrack Shaped Jets for Leading Edge Impingement.  Journal of Heat Transfer: Transactions of the ASME.  144. 2022
• Relating Metabolism Suppression and Nucleation Probability During Supercooled Biopreservation..  Journal of Biomechanical Engineering.  144:074504. 2022
• Theoretical Approach for the Fast Estimation of the Turbulent Kinematic Viscosity for Internal Flows.  Journal of Nuclear Engineering and Radiation Science.  8. 2022
• Thermal Performance of Double-Sided, Partial Height Strip Fin Arrays in a High Aspect Ratio, Rectangular Channel.  Journal of Turbomachinery.  144. 2022
• Probing the Accuracy of Experimental Data on Nusselt Numbers Within Miniature Heat Sinks 2022
• A Nonhomogeneous Bulk Flow Model for Gas in Liquid Flow Annular Seals: An Effort to Produce Engineering Results 2022
• Characterization of the Finite Element Computational Fluid Dynamics Capabilities in the Multiphysics Object Oriented Simulation Environment 2022
• Computational Fluid Dynamics Analysis of the Influence of Gas Content on the Rotordynamic Force Coefficients for a Circumferentially Grooved Annular Seal for Multiple Phase Pumps.  Journal of Tribology.  144. 2022
• Corrosion-Resistant Metal-Ceramic Composite Coatings for Tribological Applications.  Journal of Tribology.  144. 2022
• Experimental Investigation of the Subchannel Axial Pressure Drop and Hydraulic Characteristics of a 61-Pin Wire Wrapped Rod Bundle.  Journal of Fluids Engineering.  144. 2022
• A Subspace-Inclusive Sampling Method for the Computational Design of Compositionally Graded Alloys.  Journal of Mechanical Design.  144. 2022
• Bayesian Calibration of Multiple Coupled Simulation Models for Metal Additive Manufacturing: A Bayesian Network Approach.  ASCE - ASME Journal of Risk and Uncertainty in Engineering Systems, Part B. Mechanical Engineering.  8. 2022
• Effect of Pad Material, Copper Versus Steel, on the Performance of a Tilting Pad Journal Bearing: Measurements and Predictions.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  144. 2022
• Surface Layer Modification by Cryogenic Burnishing of Al 7050-T7451 Alloy With Near Ultra-Fine Grained Structure 2022
• A Model for Tilting Pad Thrust Bearings Operating With Reduced Flow RateDo Benefits Outweigh Risks? 2022
• Heat Transfer in a Rotating, Blade-Shaped, Two-Pass Cooling Channel With a Variable Aspect Ratio.  Journal of Turbomachinery.  144. 2022
• Leveraging Machine Learning (Artificial Neural Networks) for Enhancing Performance and Reliability of Thermal Energy Storage Platforms Utilizing Phase Change Materials 2022
• Making Better Swirl Brakes Using Computational Fluid Dynamics: Performance Enhancement From Geometry Variation 2022
• Modeling a Bidirectional Converter of Photovoltaic Systems for Flywheel Energy Storage Applications.  Journal of Solar Energy Engineering.  144. 2022
• Queries and Cues: Textual Stimuli for Reflective Thinking in Digital Mind-Mapping.  Journal of Mechanical Design.  144. 2022
• Special Issue: Artificial Intelligence and Engineering Design.  Journal of Mechanical Design.  144. 2022
• The Effects of Implantation Orientation of a Bileaflet Mechanical Heart Valve in an Anatomic Left Ventricle-Aorta Configuration..  Journal of Biomechanical Engineering.  144:101008. 2022
• Ductile Fracture in Plane Stress.  Journal of Applied Mechanics.  89. 2022
• Mapping and Enforcement of Minimally Restrictive Manufacturability Constraints in Mechanical Design 2022
• Predictive Modeling for Rooftop Solar Energy Throughput: A Machine Learning-Based Optimization for Building Energy Demand Scheduling 2022
• Harmonizing the Mooring System Reliability of Multiline Anchor Wind Farms.  ASCE - ASME Journal of Risk and Uncertainty in Engineering Systems, Part B. Mechanical Engineering.  7. 2021
• Use of Perforation and Mathematical Modeling to Increase Solar-Based Steam Distillation System Efficiency 2021
• Measurements of Static and Dynamic Load Performance of a 102 MM Carbon-Graphite Porous Surface Tilting-Pad Gas Journal Bearing 2021
• An Analytical Two-Phase Flow Model for Prediction of Leakage in Wet Gas Labyrinth Seals and Pocket Damper Seals. Is Simplicity Still Desired?.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  143. 2021
• Exploring System of Systems Resilience Versus Affordability Trade-Space Using a Bio-Inspired Metric.  Journal of Computing and Information Science in Engineering.  21. 2021
• High-Temperature Ignition Kinetics of Gas Turbine Lubricating Oils.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  143. 2021
• Motoric and Perceptual Kinesthetic Symmetry in Bi-Manual Interactions.  Journal of Computing and Information Science in Engineering.  21. 2021
• An Equilibrium Prediction Method for Control and Fault Detection of Energy Systems.  ASCE - ASME Journal of Risk and Uncertainty in Engineering Systems, Part B. Mechanical Engineering.  7. 2021
• Binder Jetting Additive Manufacturing: Effect of Particle Size Distribution on Density 2021
• Heat Transfer and Pressure Loss in a Two-Pass, Rectangular Channel Featuring a Reduced Cross-Sectional Area After the 180-Deg Tip Turn With Different Turning Vane Configurations.  Journal of Turbomachinery.  143. 2021
• In Memoriam: Karl N. Reid, Jr., 1934-2021.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  143. 2021
• Measurements to Quantify the Effect of a Reduced Flow Rate on the Performance of a Tilting Pad Journal Bearing With Flooded Ends.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  143. 2021
• On the Experimental Dynamic Force Performance of a Squeeze Film Damper Supplied Through a Check Valve and Sealed With O-Rings.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  143. 2021
• Design and Hardware in-the-Loop Validation of an Effective Super-Twisting Controller for Stick-Slip Suppression in Drill-String Systems.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  143. 2021
• A Product Architecture-Based Tool for Bioinspired Function-Sharing.  Journal of Mechanical Design.  143. 2021
• Additively Manufactured Compliant Hybrid Gas Thrust Bearing for Supercritical Carbon Dioxide Turbomachinery: Experimental Evaluation and Fluid-Structure Model Predictions.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  143. 2021
• Computational Fluid Dynamics-Machine Learning Prediction of Machinery Coupling Windage Heating and Power Loss.  Journal of Heat Transfer: Transactions of the ASME.  143. 2021
• Design Ideation Through Speculative Fiction: Foundational Principles and Exploratory Study.  Journal of Mechanical Design.  143. 2021
• Effects of Size and Surface Treatment on Fatigue Life of Fused Filament Fabrication Manufactured Acrylonitrile Butadiene Styrene Parts 2021
• Heat Transfer Enhancement in a Rectangular Cooling Channel With Airfoil Shaped Fins.  Journal of Thermal Science and Engineering Applications.  13. 2021
• Heat Transfer in a Rotating, Two-Pass, Variable Aspect Ratio Cooling Channel With Profiled V-Shaped Ribs.  Journal of Turbomachinery.  143. 2021
• Study of Compact Heat Exchangers Operating in Self-Sustained Oscillatory Flows.  Journal of Thermal Science and Engineering Applications.  13. 2021
• A High Resolution Simulation of a Single Shock-Accelerated Particle.  Journal of Fluids Engineering.  143. 2021
• Heat Transfer in Rotating, Trailing-Edge, Converging Channels With Smooth Walls and Pin-Fins.  Journal of Turbomachinery.  143. 2021
• Experimental Measurements of the Wake of a Sphere at Subcritical Reynolds Numbers.  Journal of Fluids Engineering.  143. 2021
• Fostering Function-Sharing Using Bioinspired Product Architecture.  Journal of Mechanical Design.  143. 2021
• Heat Transfer in Rotating, Trailing Edge, Converging Channels With Partial Length Pin-Fins.  Journal of Turbomachinery.  143. 2021
• Three-Dimensional Solid Finite Element Contact Model for Rotordynamic Analysis: Experiment and Simulation.  Journal of Vibration and Acoustics: Transactions of the ASME.  143. 2021
• Upstream Film Cooling on the Contoured Endwall of a Transonic Turbine Vane in an Annular Cascade.  Journal of Turbomachinery.  143. 2021
• Generation and Enforcement of Process-Driven Manufacturability Constraints: A Survey of Methods and Perspectives for Product Design.  Journal of Mechanical Design.  143. 2021
• A Review on Corrosion and Wear of Additively Manufactured Alloys.  Journal of Tribology.  143. 2021
• Auto-Ignition of Gas Turbine Lubricating Oils in a Shock Tube Using Spray Injection.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  143. 2021
• Generalizability of Convolutional Encoder-Decoder Networks for Aerodynamic Flow-Field Prediction Across Geometric and Physical-Fluidic Variations.  Journal of Mechanical Design.  143. 2021
• Cosine Error-Free Metrology Tool Path Planning for Thickness Profile Measurements 2021
• Experimental Analysis of Salt Hydrate Latent Heat Thermal Energy Storage System With Porous Aluminum Fabric and Salt Hydrate as Phase Change Material With Enhanced Stability and Supercooling 2021
• Hydrodynamic Analysis Techniques for Coupled Seakeeping-Sloshing in Zero Speed Vessels: A Review.  Journal of Offshore Mechanics and Arctic Engineering: Transactions of the ASME.  143. 2021
• Kinesthetic Metaphors for Precise Spatial Manipulation: A Study of Object Rotation.  Journal of Computing and Information Science in Engineering.  21. 2021
• Laminar Flame Speed Measurements of Kerosene-Based Fuels Accounting for Uncertainties in Mixture Average Molecular Weight.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  143. 2021
• Taking the Guess Work Out of the Initial Guess: A Solution Interval Method for Least-Squares Parameter Estimation in Nonlinear Models.  Journal of Computing and Information Science in Engineering.  21. 2021
• A Review of Journal Bearing Thermal Effects on Rotordynamic Response.  Journal of Tribology.  143. 2021
• Computational Evaluation of Thermal Response of Open-Cell Foam With Circular Pore 2021
• Efficient Parametric Optimization for Expensive Single Objective Problems 2021
• On the Effect of Clearance on the Leakage and Cavity Pressures in an Interlocking Labyrinth Seal Operating With and Without Swirl Brakes: Experiments and Predictions 2021
• On the Leakage and Dynamic Force Coefficients of a Novel Stepped Shaft Pocket Damper Seal: Experimental and Numerical Verification 2021
• Performance of a Nitinol Honeycomb Stent for the Management of Atherosclerotic Aortic Plaque: Crimping, Sealing, and Fluid-Structure Interaction Analysis.  Journal of Applied Mechanics.  88. 2021
• Special Issue: In Honor of Robert M. McMeeking's 70th Birthday.  Journal of Applied Mechanics.  88. 2021
• Tilting Pad Journal Bearing Misalignment Effect on Thermally Induced Synchronous Instability (Morton Effect).  Journal of Tribology.  143. 2021
• Turbulent Mixing Process of a Round Jet With Slot Lobes 2021
• Comparison of Model Predictions and Performance Test Data for a Prototype Thermal Energy Storage Module 2021
• Interaction of Void Spacing and Material Size Effect on Inter-Void Flow Localization.  Journal of Applied Mechanics.  88. 2021
• Numerical Finger Kinematic Models Derived From Virtual Grasping of Various Cylindrical Objects With the Family of Conic Sections 2021
• Stroke-Hover Intent Recognition for Mid-Air Curve Drawing Using Multi-Point Skeletal Trajectories.  Journal of Computing and Information Science in Engineering.  21. 2021
• Vibrations of Air-Coupled Web Systems.  Journal of Vibration and Acoustics: Transactions of the ASME.  143. 2021
• Comparison of Flowability and Sinterability Among Different Binder Jetting Feedstock Powders: Nanopowder, Micropowder, and Granulated Powder.  Journal of Micro and Nano-Manufacturing.  9. 2021
• Comparison of Rotary and Linear Cutting Methodology in Determining Specific Cutting Energy of Granite 2021
• Damping Characteristics of Fluidic Pressure-Fed Mechanism for Positioning Applications.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  143. 2021
• Down-Hole Directional Drilling Dynamics Modeling Based on a Hybrid Modeling Method With Model Order Reduction 2021
• Near-Wall Velocimetry in the Impingement-Zones of a Microdroplet and a Round Jet Stream.  Journal of Fluids Engineering.  143. 2021
• Novel Approach for Optical Characterization of Thrust Collar Lubricated Area: Experimental and Numerical Results.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  143. 2021
• Three-Dimensional Printing of Hydrogel Filters Containing Algae Cells for Copper Removal From Contaminated Water 2021
• A Thermo-Hydrodynamic Model for Thermal Energy Flow Management in A (Semi) Floating Ring Bearing System for Automotive Turbochargers.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  143. 2021
• Computational Fluid Dynamics Based Mixing Prediction for Tilt Pad Journal Bearing TEHD Modeling-Part I: TEHD-CFD Model Validation and Improvements.  Journal of Tribology.  143. 2021
• Computational Fluid Dynamics Based Mixing Prediction for Tilt Pad Journal Bearing TEHD Modeling-Part II: Implementation With Machine Learning.  Journal of Tribology.  143. 2021
• On the Effect of the Gap of End Seals on Force Coefficients of a Test Integral Squeeze Film Damper: Experiments and Predictions.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  143. 2021
• Quantitative Analysis of Forced and Unforced Turbulent Multiphase Coaxial Jets.  Journal of Fluids Engineering.  143. 2021
• A Microthermal Sensor for Cryoablation Balloons..  Journal of Biomechanical Engineering.  142:121003. 2020
• A System to Package Perspective on Transient Thermal Management of Electronics.  Journal of Electronic Packaging.  142. 2020
• Gas Labyrinth Seals: Improved Prediction of Leakage in Gas Labyrinth Seals Using an Updated Kinetic Energy Carry-Over Coefficient.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  142. 2020
• Local Truncation Error-Informed Code Verification 2020
• Squeeze Film Damper Suppression of Thermal Bow-Morton Effect Instability.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  142. 2020
• A Review of Manufacturing Process Control 2020
• On the Effect of Supplied Flow Rate to the Performance of a Tilting-Pad Journal Bearing-Static Load and Dynamic Force Measurements.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  142. 2020
• Effects of Clearance on the Performance of a Labyrinth Seal Under Wet-Gas Conditions.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  142. 2020
• Experiments With a Rotor-Hybrid Gas Bearing System Undergoing Maneuver Loads From Its Base Support.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  142. 2020
• Some Remarks on the Equilibrium of Granular Materials Described by Constitutive Relations That Depend on the Gradients of the Density or Volume Fraction 2020
• Thermal Characterization of a Turbulent Free Jet With Planar Laser-Induced Fluorescence.  Journal of Thermal Science and Engineering Applications.  12. 2020
• Discussion of "Non-Axisymmetric Flows and Rotordynamic Forces in an Eccentric Shrouded Centrifugal Compressor-Part 1: Measurement" (Song, J., Kim, S., Park, T. C., Cha, B.-J., Lim, D. H., Hong, J. S., Lee, T. W., and Song, S. J., ASME J. Eng. Gas Turbines Power, 141(11), p. 111014).  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  142. 2020
• Discussion of "Non-Axisymmetric Flows and Rotordynamic Forces in an Eccentric Shrouded Centrifugal Compressor-Part 2: Analysis" (Song, J., and Song S. J., ASME J. Eng. Gas Turbines Power, 141(11), p. 111015).  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  142. 2020
• Experimental Study on the Effect of Localized Blockages on the Friction Factor of a 61-Pin Wire-Wrapped Bundle.  Journal of Fluids Engineering.  142. 2020
• Biomedical Manufacturing: A Review of the Emerging Research and Applications 2020
• A Computational Model for the Analysis of the Static Forced Performance of Self-Equalizing Tilting Pad Thrust Bearings.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  142. 2020
• Metal Binder Jetting Additive Manufacturing: A Literature Review 2020
• Exploring Sample/Feature Hybrid Transfer for Gear Fault Diagnosis Under Varying Working Conditions.  Journal of Computing and Information Science in Engineering.  20. 2020
• Magnetic-Internal-Kinetic Energy Interactions in High-Speed Turbulent Magnetohydrodynamic Jets.  Journal of Fluids Engineering.  142. 2020
• Research Opportunities and Challenges in Engineering System Evolution.  Journal of Mechanical Design.  142. 2020
• Thermodynamic Study on Blends of Hydrocarbons and Carbon Dioxide as Zeotropic Refrigerants 2020
• Transonic Turbine Vane Endwall Film Cooling Using the Pressure-Sensitive Paint Measurement Technique.  Journal of Turbomachinery.  142. 2020
• Tribological Evaluation of Electrical Resistance of Lubricated Contacts.  Journal of Tribology.  142:1-9. 2020
• Effect of 45-deg Rib Orientations on Heat Transfer in a Rotating Two-Pass Channel With Aspect Ratio from 4:1 to 2:1.  Journal of Turbomachinery.  142. 2020
• Influence of Assumed Strain Hardening Relation on Plastic Stress-Strain Response Identification From Conical Indentation.  Journal of Engineering Materials and Technology.  142. 2020
• A Base Study to Investigate MASH Conservativeness of Occupant Risk Evaluation.  ASCE - ASME Journal of Risk and Uncertainty in Engineering Systems, Part B. Mechanical Engineering.  6. 2020
• Applicability of Common RANS Models for the Calculation of Transient Forced to Natural Convection 2020
• Detailed Heat Transfer Coefficient Measurements on a Scaled Realistic Turbine Blade Internal Cooling System.  Journal of Thermal Science and Engineering Applications.  12. 2020
• Heat Transfer and Pressure Drop Measurements in a High Aspect Ratio Channel With Circular Pins and Strip Fins.  Journal of Thermal Science and Engineering Applications.  12:1-28. 2020
• Hindcasting Loss and Evaluating Implications of Track Location for the 2011 Joplin, Missouri Tornado.  ASCE - ASME Journal of Risk and Uncertainty in Engineering Systems, Part B. Mechanical Engineering.  6. 2020
• Investigating a Mixed-Initiative Workflow for Digital Mind-Mapping.  Journal of Mechanical Design.  142. 2020
• Effect of Leakage Flow Path Wear on Axial Thrust in Downhole Electrical Submersible Pump Unit.  Journal of Fluids Engineering.  142. 2020
• CH Kinetics Measurements and Their Importance for Modeling Prompt NOx Formation in Gas Turbines.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  142. 2020
• Ceramic Binder Jetting Additive Manufacturing: A Literature Review on Density 2020
• Cosine Error Elimination Method for One-Dimensional Convex and Concave Surface Profile Measurements 2020
• Development of Coupled Program FAST-SIMDYN and Study of Non-Linear Hydrodynamics, Coupled With Negative Damping and Aerodynamics of Floating Offshore Wind Turbines.  Journal of Offshore Mechanics and Arctic Engineering: Transactions of the ASME.  142:1-20. 2020
• Direct Numerical Simulation of the Flow Through a Randomly Packed Pebble Bed.  Journal of Fluids Engineering.  142. 2020
• Dynamics of Necking and Fracture in Ductile Porous Materials.  Journal of Applied Mechanics.  87:1-15. 2020
• Iterative Learning Control for a Type of Modified Smith Predictor.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  142. 2020
• Simulation, Test, and Mitigation of 1/2x Forward Whirl Following Rotor Drop Onto Auxiliary Bearings.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  142. 2020
• Acoustic Emission Characterization of Natural Fiber Reinforced Plastic Composite Machining Using a Random Forest Machine Learning Model 2020
• Assessment of RANS-Based Turbulence Models for Buoyancy-Influenced Forced Convection on a Heated Vertical Surface 2020
• Characterizing Mist Distribution in Through-Tool Minimum Quantity Lubrication Drills 2020
• Influence of Grain Size Distribution on Ductile Intergranular Crack Growth Resistance.  Journal of Applied Mechanics.  87:1-11. 2020
• Preswirl and Mixed-Flow (Mainly Liquid) Effects on Rotordynamic Performance of a Long (L/D=0.75) Smooth Seal.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  142. 2020
• Special Issue: Proceedings of the Century Fracture Mechanics Summit.  Journal of Applied Mechanics.  87:1-2. 2020
• Translation of Cryobiological Techniques to Socially Economically Deprived PopulationsPart 1: Cryogenic Preservation Strategies 2020
• Experimental Study of a Single Microchannel Flow Under Nonuniform Heat Flux.  Journal of Thermal Science and Engineering Applications.  12. 2020
• Investigating Force-Feedback in Mid-Air Sketching of Multi-Planar Three-Dimensional Curve-Soups.  Journal of Computing and Information Science in Engineering.  20. 2020
• Nonlinear Kalman Filtering With Expensive Forward Models Via Measure Change.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  142. 2020
• Special Section: 11th International Conference on Thermal Engineering, 2018.  Journal of Thermal Science and Engineering Applications.  12. 2020
• Stability of Non-Axisymmetric Rotor and Bearing Systems Modeled With Three-Dimensional-Solid Finite Elements.  Journal of Vibration and Acoustics: Transactions of the ASME.  142. 2020
• On the Cutting of Metals: A Mechanics Viewpoint 2020
• Reynolds-Averaged Simulation of the Fully Developed Turbulent Drag Reduction Flow in Concentric Annuli.  Journal of Fluids Engineering.  142. 2020
• Shear Bands in Materials Processing: Understanding the Mechanics of Flow Localization From Zener's Time to the Present.  Applied Mechanics Reviews: an assessment of world literature in engineering sciences.  72. 2020
• A Gaussian Process Model-Guided Surface Polishing Process in Additive Manufacturing 2020
• A Study for Rotordynamic and Leakage Characteristics of a Long-Honeycomb Seal With Two-Phase, Mainly Air Mixtures.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  142. 2020
• A Study on the Leakage and Rotordynamic Coefficients of a Long-Smooth Seal With Laminar-Two-Phase, Mainly-Oil Mixtures.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  142. 2020
• Heat Transfer in a Rotating, Blade-Shaped Serpentine Cooling Passage With Discrete Ribbed Walls at High Reynolds Numbers.  Journal of Heat Transfer: Transactions of the ASME.  142. 2020
• Laminar Flame Speed Experiments of Alternative Liquid Fuels.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  142. 2020
• Leakage and Force Coefficients of a Grooved Wet (Bubbly Liquid) Seal for Multiphase Pumps and Comparisons With Prior Test Results for a Three Wave Seal.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  142. 2020
• Model and Experimental Verification of the Dynamic Forced Performance of a Tightly Sealed Squeeze Film Damper Supplied With a Bubbly Mixture 2020
• A Machine Learning Approach to Aircraft Sensor Error Detection and Correction.  Journal of Computing and Information Science in Engineering.  19. 2019
• Heat Transfer in a Rotating Two-Pass Rectangular Channel Featuring a Converging Tip Turn With Various 45 deg Rib Coverage Designs.  Journal of Thermal Science and Engineering Applications.  11. 2019
• A Study on the Leakage and Rotordynamic Performance of a Long Labyrinth Seal Under Mainly Air Conditions.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  141. 2019
• Effect of Pad and Liner Material Properties on the Static Load Performance of a Tilting Pad Thrust Bearing.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  141. 2019
• Experimental Study of the Static and Dynamic Characteristics of a Long (L/D=0.75) Labyrinth Annular Seal Operating Under Two-Phase (Liquid/Gas) Conditions.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  141. 2019
• Leakage and Dynamic Force Coefficients of a Pocket Damper Seal Operating Under a Wet Gas Condition: Tests Versus Predictions.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  141. 2019
• Direct Numerical Simulation of the Flow in a Bare Rod Bundle at Different Prandtl Numbers.  Journal of Heat Transfer: Transactions of the ASME.  141. 2019
• An Enhanced Axisymmetric Solid Element for Rotor Dynamic Model Improvement.  Journal of Vibration and Acoustics: Transactions of the ASME.  141. 2019
• Extending Classical Friction Loss Modeling to Predict the Viscous Performance of Pumping Devices.  Journal of Fluids Engineering.  141. 2019
• Numerical Modeling of Nanofluid Thermal Conductivity: The Effect of Nanonetwork on Thermal Transport Behavior.  Journal of Heat Transfer: Transactions of the ASME.  141. 2019
• Thermal Cycling of Calcium Chloride Hexahydrate With Strontium Chloride as a Phase Change Material for Latent Heat Thermal Energy Storage Applications in a Nondifferential Scanning Calorimeter Set-Up.  Journal of Thermal Science and Engineering Applications.  11. 2019
• Additive Manufacturing Processes for Infrastructure Construction: A Review 2019
• Interactions Between Structural Remodeling and Hypertrophy in the Right Ventricle in Response to Pulmonary Arterial Hypertension..  Journal of Biomechanical Engineering.  141:0910161-09101613. 2019
• Pad-Pivot Friction Effect on Nonlinear Response of a Rotor Supported by Tilting-Pad Journal Bearings.  Journal of Tribology.  141. 2019
• Vat Photopolymerization3D Printing of Nanocomposites: A Literature Review 2019
• A Novel Finite Element Model to Assess the Effect of Solid Stress Inside Tumors on Elastographic Normal Strains and Fluid Pressure.  Journal of Engineering and Science in Medical Diagnostics and Therapy.  2. 2019
• Effect of Carbon Dioxide on the Laminar Burning Speed of Propane-Air Mixtures 2019
• Full-Field Dependence on Inlet Modeling of Non-Isothermal Turbulent Jets Using Validated Large Eddy Simulations.  Journal of Fluids Engineering.  141. 2019
• Leakage and Cavity Pressures in an Interlocking Labyrinth Gas Seal: Measurements Versus Predictions.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  141. 2019
• Thermodynamic Theory and Experimental Validation of a Multiphase Isochoric Freezing Process..  Journal of Biomechanical Engineering.  141:081011. 2019
• Tracking of Periodic Trajectories for Switched Systems Under Time-Varying Asynchronous Switching.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  141. 2019
• A Transient Computational Fluid Dynamics, Phase Modulated, Multifrequency Approach for Impeller Rotordynamic Forces.  Journal of Fluids Engineering.  141. 2019
• Adaptive Dimensionality Reduction for Fast Sequential Optimization With Gaussian Processes.  Journal of Mechanical Design.  141:1-16. 2019
• Control and Powertrain Management for Multi-Autonomous Hybrid Vehicles.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  141. 2019
• Heat Transfer in a Rotating Two-Pass Rectangular Channel Featuring Reduced Cross-Sectional Area After Tip Turn (Aspect Ratio=4:1 to 2:1) With Profiled 60 deg Angled Ribs.  Journal of Turbomachinery.  141:1-40. 2019
• Pump Grooved Seals: A Computational Fluid Dynamics Approach to Improve Bulk-Flow Model Predictions.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  141. 2019
• Coupling Effects of Viscous Sheet and Ambient Fluid on Boundary Layer Flow and Heat Transfer in Power-Law Fluids.  Journal of Heat Transfer: Transactions of the ASME.  141:061701. 2019
• Effect of Oil Supply Pressure on the Force Coefficients of a Squeeze Film Damper Sealed With Piston Rings.  Journal of Tribology.  141:1-15. 2019
• Generating Technology Evolution Prediction Intervals Using a Bootstrap Method.  Journal of Mechanical Design.  141. 2019
• Measurements Versus Predictions for a Hybrid (Hydrostatic Plus Hydrodynamic) Thrust Bearing for a Range of Orifice Diameters.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  141. 2019
• Swirl Impinging Cooling on an Airfoil Leading Edge Model at Large Reynolds Number.  Journal of Thermal Science and Engineering Applications.  11. 2019
• Three-Dimensional Thermo-Elasto-Hydrodynamic Computational Fluid Dynamics Model of a Tilting Pad Journal Bearing-Part I: Static Response.  Journal of Tribology.  141:1-44. 2019
• Three-Dimensional Thermo-Elasto-Hydrodynamic Computational Fluid Dynamics Model of a Tilting Pad Journal Bearing-Part II: Dynamic Response.  Journal of Tribology.  141:1-35. 2019
• Turbine Vane Endwall Film Cooling Comparison From Five Film-Hole Design Patterns and Three Upstream Injection Angles.  Journal of Thermal Science and Engineering Applications.  11. 2019
• Effect of Density Ratio on Film-Cooling Effectiveness Distribution and Its Uniformity for Several Hole Geometries on a Flat Plate 2019
• Frontiers, Fundamentals, and Future Directions of Transport: From Theory to Applications - A Special Issue Honoring Dr. P. S. Ayyaswamy 2019
• Limits on Transformation Strains for Non-Negative Dissipation.  Journal of Applied Mechanics.  86:1-10. 2019
• Output Feedback Fractional Integral Sliding Mode Control of Robotic Manipulators.  Journal of Computational and Nonlinear Dynamics.  14. 2019
• Static and Dynamic Coefficient Measurements for a Thrust Collar Used in an Integrally Geared Compressor.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  141. 2019
• Effect of Unbalance Force Vector Orientation on the Whirl Response of Cracked Rotors.  Journal of Vibration and Acoustics: Transactions of the ASME.  141. 2019
• Film Cooling Effectiveness From Two Rows of Compound Angled Cylindrical Holes Using Pressure-Sensitive Paint Technique.  Journal of Heat Transfer: Transactions of the ASME.  141:042202. 2019
• L-System-Generated Mechanism Topology Optimization Using Graph-Based Interpretation.  Journal of Mechanisms and Robotics.  11. 2019
• Leakage and Dynamic Force Coefficients for Two Labyrinth Gas Seals: Teeth-on-Stator and Interlocking Teeth Configurations. A Computational Fluid Dynamics Approach to Their Performance 2019
• NOx-Hydrocarbon Kinetics Model Validation Using Measurements of H2O in Shock-Heated CH4/C2H6 Mixtures With NO2 as Oxidant.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  141. 2019
• Using Simulator Data to Facilitate Human Reliability Analysis.  Journal of Offshore Mechanics and Arctic Engineering: Transactions of the ASME.  141. 2019
• Anti-Galling Effects of alpha-Zirconium Phosphate Nanoparticles as Grease Additives.  Journal of Tribology.  141. 2019
• Expensive Black-Box Model Optimization via a Gold Rush Policy.  Journal of Mechanical Design.  141. 2019
• Fractional PD-(ID mu)-D-lambda Error Manifolds for Robust Tracking Control of Robotic Manipulators.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  141. 2019
• Layer-wise Anomaly Detection in Laser Powder-bed Fusion Metal Additive Manufacturing 2019
• Leakage and Rotordynamic Force Coefficients of A Three-Wave (Air in Oil) Wet Annular Seal: Measurements and Predictions.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  141:032503. 2019
• On the Influence of the Entrance Section on the Rotordynamic Performance of a Pump Seal With Uniform Clearance: A Sharp Edge Versus A Round Inlet 2019
• Step Clearance Seals: An Analysis to Demonstrate Their Unique Performance.  Journal of Tribology.  141. 2019
• A Thermoelastohydrodynamic Analysis for the Static Performance of High-Speed-Heavy Load Tilting-Pad Journal Bearing Operating in the Turbulent Flow Regime and Comparisons to Test Data.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  141. 2019
• Compliant Hybrid Gas Bearing Using Modular Hermetically Sealed Squeeze Film Dampers.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  141. 2019
• Dynamic Characterization of a Novel Externally Pressurized Compliantly Damped Gas-Lubricated Bearing With Hermetically Sealed Squeeze Film Damper Modules.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  141. 2019
• Estimation of Relative Permeability and Capillary Pressure for PUNQ-S3 Model Using a Modified Iterative Ensemble Smoother 2019
• Experimental Force Coefficients for Two Sealed Ends Squeeze Film Dampers (Piston Rings and O-Rings): An Assessment of Their Similarities and Differences.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  141. 2019
• Full- and Reduced-Order Fault Detection Filter Design With Application in Flow Transmission Lines 2019
• Hermetically Sealed Squeeze Film Damper for Operation in Oil-Free Environments.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  141. 2019
• Large Eddy Simulation of the Flow Behavior in a Simplified Helical Coil Steam Generator.  Journal of Fluids Engineering.  141:021401. 2019
• On the Leakage, Torque, and Dynamic Force Coefficients of Air in Oil (Wet) Annular Seal: A Computational Fluid Dynamics Analysis Anchored to Test Data 2019
• An Analytical Poroelastic Model of a Nonhomogeneous Medium Under Creep Compression for Ultrasound Poroelastography Applications-Part I..  Journal of Biomechanical Engineering.  141:060902. 2019
• An Analytical Poroelastic Model of a Nonhomogeneous Medium Under Creep Compression for Ultrasound Poroelastography Applications-Part II..  Journal of Biomechanical Engineering.  141:060903. 2019
• Drilling Control System Using an Equivalent Input Disturbance-Based Control With a Neutral-Type Axial-Torsional Coupled Dynamics Model.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  141. 2019
• Nucleation and Boundary Layer Growth of Shear Bands in Machining 2019
• A Control Design Approach for TITO Systems Using Measured Data.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  141. 2019
• Clearance Effects on Rotordynamic Performance of a Long Smooth Seal With Two-Phase, Mainly-Air Mixtures.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  141. 2019
• Identification of Plastic Properties From Conical Indentation Using a Bayesian-Type Statistical Approach.  Journal of Applied Mechanics.  86. 2019
• Interaction of Flow and Film Cooling Effectiveness Between Double-Jet Film-Cooling Holes With Various Spanwise Distances.  Journal of Turbomachinery.  140. 2018
• Dynamic Force Coefficients of Hydrostatic Gas Films for Recessed Flat Plates: Experimental Identification and Numerical Predictions.  Journal of Tribology.  140:061703. 2018
• On the Design, Manufacture, and Premature Failure of a Metal Mesh Foil Thrust Bearing-How Concepts That Work on Paper, Actually Do Not.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  140. 2018
• Rotordynamic Force Coefficients of Volutes and Diffusers for Prediction of Turbomachinery Vibration.  Journal of Vibration and Acoustics: Transactions of the ASME.  140. 2018
• A Higher-Order Theory for Open and Closed Curved Rods and Tubes Using a Novel Curvilinear Cylindrical Coordinate System.  Journal of Applied Mechanics.  85:091006. 2018
• A Model for the Design of a Pomelo Peel Bioinspired Foam.  Journal of Mechanical Design.  140. 2018
• An Exact Robust Differentiator Based on Continuous Fractional Sliding Modes.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  140. 2018
• Effects of Microstructure of Quasicrystal Alloys on Their Mechanical and Tribological Performance.  Journal of Tribology.  140. 2018
• Kinematics of an Articulated Connecting Rod and Its Effect on Simulated Compression Pressures and Port Timings.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  140:092803. 2018
• Thermodynamic Considerations Related to Knock: Results From an Engine Cycle Simulation.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  140:092805. 2018
• Trajectory Tracking and Rate of Penetration Control of Downhole Vertical Drilling System.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  140. 2018
• Measured Static and Rotordynamic Characteristics of a Smooth-Stator/Grooved-Rotor Liquid Annular Seal.  Journal of Fluids Engineering.  140. 2018
• An Analytical Model of Tumors With Higher Permeability Than Surrounding Tissues for Ultrasound Elastography Imaging.  Journal of Engineering and Science in Medical Diagnostics and Therapy.  1:031006. 2018
• Experimental and Numerical Visualization of Heat Transfer and Hydrodynamics Induced by Double Droplet Train Impingement.  Journal of Heat Transfer: Transactions of the ASME.  140. 2018
• Advanced Cooling in Gas Turbines 2016 Max Jakob Memorial Award Paper.  Journal of Heat Transfer: Transactions of the ASME.  140. 2018
• Comparison of Near-Nozzle Spray Performance of Gas-to-Liquid and Jet A-1 Fuels Using Shadowgraph and Phase Doppler Anemometry 2018
• Fractional-Order Nonlinear Disturbance Observer Based Control of Fractional-Order Systems.  Journal of Computational and Nonlinear Dynamics.  13:071007. 2018
• Observer Design for a Well-bore Drilling System with Down-hole Measurement Feedback.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  140. 2018
• On Tightly Bounding the Dubins Traveling Salesman's Optimum.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  140. 2018
• Simulations of Twin Turbulent Planar-Like Jets Injected Into a Large Volume Using RANS.  Journal of Fluids Engineering.  140:121108. 2018
• Comparison of Diesel Engine Efficiency and Combustion Characteristics Between Different Bore Engines.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  140:102807. 2018
• Effect of Properties and Turgor Pressure on the Indentation Response of Plant Cells 2018
• Heat Transfer in a Rotating Cooling Channel (AR=2:1) With Rib Turbulators and a Tip Turning Vane.  Journal of Heat Transfer: Transactions of the ASME.  140. 2018
• Lateral Equilibrium Position Analysis Program With Applications to Electric Submersible Pumps.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  140. 2018
• Prediction of Rotordynamic Performance of Smooth Stator-Grooved Rotor Liquid Annular Seals Utilizing Computational Fluid Dynamics.  Journal of Vibration and Acoustics: Transactions of the ASME.  140. 2018
• Spatially Dependent Transfer Functions for Web Lateral Dynamics in Roll-to-Roll Manufacturing.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  140:111011. 2018
• Static Load Performance of a Water-Lubricated Hydrostatic Thrust Bearing.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  140. 2018
• Technology Evolution Prediction Using Lotka-Volterra Equations.  Journal of Mechanical Design.  140. 2018
• Turbine Blade Leading Edge Cooling With One Row of Normal or Tangential Impinging Jets.  Journal of Heat Transfer: Transactions of the ASME.  140. 2018
• On the Development of Incompressible Round and Equilateral Triangular Jets Due to Reynolds Number Variation.  Journal of Fluids Engineering.  140:111202. 2018
• Multi-Input-Multi-Output Control of a Utility-Scale, Shaftless Energy Storage Flywheel With a Five-Degrees-of-Freedom Combination Magnetic Bearing.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  140:101008. 2018
• A Flow Starvation Model for Tilting Pad Journal Bearings and Evaluation of Frequency Response Functions: A Contribution Toward Understanding the Onset of Low Frequency Shaft Motions.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  140. 2018
• Dynamic Characterization of an Integral Squeeze Film Bearing Support Damper for a Supercritical Co-2 Expander.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  140:052501. 2018
• Measurement and Prediction of the Journal Circumferential Temperature Distribution for the Rotordynamic Morton Effect.  Journal of Tribology.  140:031702. 2018
• Modeling and Analysis of Web Span Tension Dynamics Considering Thermal and Viscoelastic Effects in Roll-to-Roll Manufacturing 2018
• Heat Transfer in a Rib and Pin Roughened Rotating Multipass Channel With Hub Turning Vane and Trailing-Edge Slot Ejection.  Journal of Thermal Science and Engineering Applications.  10:021011. 2018
• Power Cycle Assessment of Nuclear Systems, Providing Energy Storage for Low Carbon Grids.  Journal of Nuclear Engineering and Radiation Science.  4. 2018
• Rotordynamic Stability Effects of Shrouded Centrifugal Impellers With Combined Whirl and Precession.  Journal of Vibration and Acoustics: Transactions of the ASME.  140:021007. 2018
• A New Method of Porous Space Reconstruction Using Multipoint Histogram Technology 2018
• Bifurcation Analysis of a Rotor Supported by Five-Pad Tilting Pad Journal Bearings Using Numerical Continuation.  Journal of Tribology.  140:021701. 2018
• Chip Morphology and Chip Formation Mechanisms During Machining of ECAE-Processed Titanium 2018
• Extended Kalman Filter for Stereo Vision-Based Localization and Mapping Applications 2018
• On the Influence of Lubricant Supply Conditions and Bearing Configuration to the Performance of (Semi) Floating Ring Bearing Systems for Turbochargers.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  140:032503. 2018
• Pressure Measurements in a Wire-Wrapped 61-Pin Hexagonal Fuel Bundle.  Journal of Fluids Engineering.  140. 2018
• Pressure Measurements in a Wire-Wrapped 61-Pin Hexagonal Fuel Bundle.  Journal of Fluids Engineering.  140:031104-1485. 2018
• Dynamic and Thermal Analysis of Rotor Drop on Sleeve Type Catcher Bearings in Magnetic Bearing Systems.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  140:022501. 2018
• Film Cooling Effectiveness Comparison on Full-Scale Turbine Vane Endwalls Using Pressure-Sensitive Paint Technique.  Journal of Turbomachinery.  140. 2018
• Numerical Simulation of Flow and Heat Transfer in Rotating Cooling Passage With Turning Vane in Hub Region.  Journal of Heat Transfer: Transactions of the ASME.  140:021701. 2018
• Tuning of a Rigid-Body Dynamics Model of a Flapping Wing Structure With Compliant Joints.  Journal of Mechanisms and Robotics.  10. 2018
• Application of the Proper Orthogonal Decomposition Method for Cracked Rotors.  Journal of Computational and Nonlinear Dynamics.  13. 2018
• Computational Design of Gradient Paths in Additively Manufactured Functionally Graded Materials.  Journal of Mechanical Design.  140. 2018
• Control of Down-Hole Drilling Process Using a Computationally Efficient Dynamic Programming Method.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  140:101010. 2018
• Interdisciplinary Research on Designing Engineering Material Systems: Results From a National Science Foundation Workshop.  Journal of Mechanical Design.  140. 2018
• Uncertainty Propagation Analysis of Computational Models in Laser Powder Bed Fusion Additive Manufacturing Using Polynomial Chaos Expansions 2018
• Viscous Shear Banding in Cutting of Metals 2018
• A Computational Fluid Dynamics Modified Bulk Flow Analysis for Circumferentially Shallow Grooved Liquid Seals.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  140:012504. 2018
• A Phase-Field Damage Model for Orthotropic Materials and Delamination in Composites.  Journal of Applied Mechanics.  85. 2018
• Discussion of "A Review of Thickness-Accommodation Techniques in Origami-Inspired Engineering" (Lang, RJ, Tolman, KA, Crampton, EB, Magleby, SP, and Howell, LL, 2018, ASMEAppl. Mech. Rev., 70(1), p. 010805.  Applied Mechanics Reviews: an assessment of world literature in engineering sciences.  70. 2018
• Leakage, Drag Power, and Rotordynamic Force Coefficients of an Air in Oil (Wet) Annular Seal.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  140:012505. 2018
• On the Force Coefficients of a Flooded, Open Ends Short Length Squeeze Film Damper: From Theory to Practice (and Back).  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  140:012502. 2018
• Turbine Blade Platform Film Cooling With Fan-Shaped Holes Under Simulated Swirl Purge Flow and Slashface Leakage Conditions.  Journal of Turbomachinery.  140:011006. 2018
• Simulation of Micro/Nanopowder Mixing Characteristics for Dry Spray Additive Manufacturing of Li-Ion Battery Electrodes.  Journal of Micro and Nano-Manufacturing.  5:040902. 2017
• A Review of the Rotordynamic Thermally Induced Synchronous Instability (Morton) Effect.  Applied Mechanics Reviews: an assessment of world literature in engineering sciences.  69:060801. 2017
• Closure to "Discussion of 'A Review of the Rotordynamic Thermally Induced Synchronous Instability (Morton) Effect'" (Tong, X., Palazzolo, A., and Suh, J., 2017, ASME Appl. Mech. Rev., 69(6), p. 060801).  Applied Mechanics Reviews: an assessment of world literature in engineering sciences.  69:066001. 2017
• Suppression of Irregular Frequency Effect in Hydrodynamic Problems and Free-Surface Singularity Treatment 2017
• A Predictive Model for Preliminary Gas Turbine Blade Cooling Analysis.  Journal of Turbomachinery.  139:091010. 2017
• CO and H2O Time-Histories in Shock-Heated Blends of Methane and Ethane for Assessment of a Chemical Kinetics Model.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  139:121507. 2017
• Effects of Sterilization on Shape Memory Polyurethane Embolic Foam Devices..  Journal of Medical Devices.  11:0310111-0310119. 2017
• Experimental Study of the Static and Dynamic Characteristics of a Long Smooth Seal With Two-Phase, Mainly Air Mixtures.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  139:122504. 2017
• Numerical Modeling and Analysis of Flexure-Pivot Tilting-Pad Bearing.  Journal of Tribology.  139:051704. 2017
• Thermodynamic Considerations Regarding the Use of Exhaust Gas Recirculation for Conventional and High Efficiency Engines 2017
• Liquid Holdup Discretized Solution's Existence and Uniqueness Using a Simplified Averaged One-Dimensional Upward Two-Phase Flow Transient Model.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  139:081005. 2017
• A New Family of Higher-Order Time Integration Algorithms for the Analysis of Structural Dynamics.  Journal of Applied Mechanics.  84:071008. 2017
• Bayesian Calibration and Uncertainty Quantification for a Physics-Based Precipitation Model of Nickel-Titanium Shape-Memory Alloys 2017
• Effective Higher-Order Time Integration Algorithms for the Analysis of Linear Structural Dynamics.  Journal of Applied Mechanics.  84:071009. 2017
• Evaporation Effects in Shock-Driven Multiphase Instabilities.  Journal of Fluids Engineering.  139:071204. 2017
• Experimental Investigation of Film-Cooling Effectiveness of a Highly Loaded Turbine Blade Under Steady and Periodic Unsteady Flow Conditions.  Journal of Heat Transfer: Transactions of the ASME.  139:072201. 2017
• Fisher-Kolmogorov-Petrovsky-Piscounov Reaction and n-Diffusion Cattaneo Telegraph Equation.  Journal of Heat Transfer: Transactions of the ASME.  139:074502. 2017
• Instantaneous Wind-Tunnel Model Vibration Measurements Using a Kalman Filtering Approach.  Journal of Fluids Engineering.  139:071106. 2017
• The Effect of Nanoparticle Functionalization on Lubrication Performance of Nanofluids Dispersing Silica Nanoparticles in an Ionic Liquid.  Journal of Tribology.  139:041802. 2017
• A Combinatorial Approach for Developing Ring Communication Graphs for Vehicle Formations.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  139:101014. 2017
• An Experimental Performance Evaluation of a Cold-Region Photovoltaic System With Tracking.  Journal of Solar Energy Engineering.  139:034501. 2017
• Including Housing-Casing Fluid in a Lateral Rotordynamics Analysis on Electric Submersible Pumps.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  139. 2017
• Investigation of Bubble Frequency for Slug Flow Regime in a Uniformly Heated Horizontal Microchannel.  Journal of Heat Transfer: Transactions of the ASME.  139:061501. 2017
• Laminar Heat Transfer Behavior of a Phase Change Material Fluid in Microchannels With Staggered Pins 2017
• Leading Edge Jet Impingement Under High Rotation Numbers.  Journal of Thermal Science and Engineering Applications.  9:021010. 2017
• Turbine Vane Endwall Film Cooling With Slashface Leakage and Discrete Hole Configuration.  Journal of Turbomachinery.  139:061003. 2017
• An Overview of Theories of Continuum Mechanics With Nonlocal Elastic Response and a General Framework for Conservative and Dissipative Systems.  Applied Mechanics Reviews: an assessment of world literature in engineering sciences.  69:030802. 2017
• Direct Numerical Simulation of Pebble Bed Flows: Database Development and Investigation of Low-Frequency Temporal Instabilities 2017
• Effect of Nanoparticles on the Fuel Properties and Spray Performance of Aviation Turbine Fuel 2017
• Shooting With Deflation Algorithm-Based Nonlinear Response and Neimark-Sacker Bifurcation and Chaos in Floating Ring Bearing Systems 2017
• Temperature Distribution in Moving Webs Heated by Radiation Panels: Model Development and Experimental Validation.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  139:051003. 2017
• Simulation of Combustion Recession After End-of-Injection at Diesel Engine Conditions.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  139:102804. 2017
• A Comparative Assessment of Simplified Models for Simulating Parametric Roll 2017
• Combined Effects of Freestream Pressure Gradient and Density Ratio on the Film Cooling Effectiveness of Round and Shaped Holes on a Flat Plate.  Journal of Turbomachinery.  139:041003. 2017
• Disturbance Accommodating Control Design for Wind Turbines Using Solvability Conditions.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  139:041007. 2017
• Loading-Unloading Cycles of Three-Dimensional-Printed Built Bimaterial Structures With Ceramic and Elastomer 2017
• On the Predicted Effect of Angular Misalignment on the Performance of Oil Lubricated Thrust Collars in Integrally Geared Compressors.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  139:042503. 2017
• Characterization of Tab-Induced Counter-Rotating Vortex Pair for Mixing Applications.  Journal of Fluids Engineering.  139:031102. 2017
• Investigation of Shear-Thinning Behavior on Film Thickness and Friction Coefficient of Polyalphaolefin Base Fluids With Varying Olefin Copolymer Content.  Journal of Tribology.  139:021504. 2017
• Particulate Release From Nanoparticle-Loaded Shape Memory Polymer Foams..  Journal of Medical Devices.  11:0110091-0110099. 2017
• Rough Surface Normal Nanocontact Stiffness: Experimental Measurements and Rough Surface Contact Model Predictions.  Journal of Applied Mechanics.  84:031006. 2017
• Theoretical Prediction of Laminar Burning Speed and Ignition Delay Time of Gas-to-Liquid Fuel 2017
• Turbine Blade Platform Film Cooling With Simulated Swirl Purge Flow and Slashface Leakage Conditions.  Journal of Turbomachinery.  139:031012. 2017
• Wear Modeling of Nanometer Thick Protective Coatings.  Journal of Tribology.  139:021601. 2017
• A Water-Lubricated Hybrid Thrust Bearing: Measurements and Predictions of Static Load Performance.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  139:022506. 2017
• Experimental and Numerical Visualization of Droplet-Induced Crown Splashing Dynamics.  Journal of Heat Transfer: Transactions of the ASME.  139:020909. 2017
• Multi-Objective Optimization Design of Nonlinear Magnetic Bearing Rotordynamic System 2017
• Relating Entropy Flux With Heat Flux in Two-Temperature Thermodynamic Model for Metal Thermoviscoplasticity 2017
• Computationally Efficient Down-Hole Drilling System Dynamics Modeling Integrating Finite Element and Transfer Matrix.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  139:121003. 2017
• Experimental Study and Finite Element Modeling of Workpiece Temperature in Finish Cylinder Boring 2017
• A Constraint Satisfaction Algorithm for the Generalized Inverse Phase Stability Problem.  Journal of Mechanical Design.  139:011401. 2017
• Double Overhung Disk and Parameter Effect on Rotordynamic Synchronous Instability-Morton Effect-Part I: Theory and Modeling Approach.  Journal of Tribology.  139:011705. 2017
• Double Overhung Disk and Parameter Effect on Rotordynamic Synchronous Instability-Morton Effect-Part II: Occurrence and Prevention 2017
• Dynamics and Control of a Differential Drive Robot With Wheel Slip: Application to Coordination of Multiple Robots.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  139:014505. 2017
• Solid Element Rotordynamic Modeling of a Rotor on a Flexible Support Structure Utilizing Multiple-Input and Multiple-Output Support Transfer Functions.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  139:012503. 2017
• Two-Temperature Thermodynamics for Metal Viscoplasticity: Continuum Modeling and Numerical Experiments.  Journal of Applied Mechanics.  84:011002. 2017
• Impingement Heat Transfer on a Cylindrical, Concave Surface With Varying Jet Geometries.  Journal of Heat Transfer: Transactions of the ASME.  138:122202. 2016
• Kinematics of Origami Structures With Smooth Folds.  Journal of Mechanisms and Robotics.  8:061019. 2016
• Robustness of Using Dynamic Motions and Template Matching to the Limb Position Effect in Myoelectric Classification.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  138:111009. 2016
• Design of Stretchable Electronics Against Impact..  Journal of Applied Mechanics.  83:1010091-1010095. 2016
• Nanoindentation Studies of the Effects of Ion Irradiation on the Near Surface Mechanical Response of Annealed Ti40Cu32Pd14Zr10Sn2Si2 Metallic Glass Ribbons.  Journal of Tribology.  138:041403. 2016
• Nonstationary Vibration Signal Analysis Using Wavelet-Based Time-Frequency Filter and Wigner-Ville Distribution.  Journal of Vibration and Acoustics: Transactions of the ASME.  138:051009. 2016
• Suppression of Lateral and Torsional Stick-Slip Vibrations of Drillstrings With Impact and Torsional Dampers.  Journal of Vibration and Acoustics: Transactions of the ASME.  138:051013. 2016
• Cityplot: Visualization of High-Dimensional Design Spaces With Multiple Criteria.  Journal of Mechanical Design.  138:091403. 2016
• Effects of Operating Temperature on the Heat Transfer Characteristics of Photovoltaic Systems in the Upper Midwest.  Journal of Thermal Science and Engineering Applications.  8:031012. 2016
• Extraction of Anisotropic Mechanical Properties From Nanoindentation of SiC-6H Single Crystals 2016
• Proto-TAI++: Exploring Perceptually Consistent Creation of Planar Shape Assemblies Through Multimodal Tangible Interactions.  Journal of Computing and Information Science in Engineering.  16:030906-030906. 2016
• RANS Based Computational Fluid Dynamics Simulation of Fully Developed Turbulent Newtonian Flow in Concentric Annuli.  Journal of Fluids Engineering.  138:091202. 2016
• Surface Structure Enhanced Microchannel Flow Boiling.  Journal of Heat Transfer: Transactions of the ASME.  138:091501. 2016
• A Mechanics Model for Sensors Imperfectly Bonded to the Skin for Determination of the Young's Moduli of Epidermis and Dermis..  Journal of Applied Mechanics.  83:0845011-0845013. 2016
• An Expert System for Differential Diagnosis of Myocardial Infarction.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  138:111012. 2016
• Computational Studies of Interfacial Reactions at Anode Materials: Initial Stages of the Solid-Electrolyte-Interphase Layer Formation.  Journal of Electrochemical Energy Conversion and Storage.  13:031002. 2016
• Effects of Screen Laminates on Droplet-Induced Film Hydrodynamics and Surface Heat Transfer.  Journal of Heat Transfer: Transactions of the ASME.  138:080902. 2016
• Experimental and Numerical Visualization of Counter Rotating Vortices.  Journal of Heat Transfer: Transactions of the ASME.  138:080908. 2016
• Material Model for Creep-Assisted Microcracking Applied to S2 Sea Ice.  Journal of Applied Mechanics.  83:111002. 2016
• Response of a Squeeze Film Damper-Elastic Structure System to Multiple and Consecutive Impact Loads.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  138:122504. 2016
• Suppressed Dry-out in Two-Phase Microchannels via Surface Structures.  Journal of Heat Transfer: Transactions of the ASME.  138:080905. 2016
• The Impact of Pad Flexibility on the Rotordynamic Coefficients of Tilting-Pad Journal Bearings.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  138:082501. 2016
• Transient Response of a Short-Length (L/D=0.2) Open-Ends Elastically Supported Squeeze Film Damper: Centered and Largely Off-Centered Whirl Motions.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  138:122503. 2016
• Turbine Platform Cooling and Blade Suction Surface Phantom Cooling From Simulated Swirl Purge Flow.  Journal of Turbomachinery.  138:081004. 2016
• Low-Dimensional Modeling of Transient Two-Phase Flow in Pipelines.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  138:101008. 2016
• Design and Experimental Investigation of Rotational Angle-Based Tracking Control.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  138:071005. 2016
• Rotordynamic Morton Effect Simulation With Transient, Thermal Shaft Bow 2016
• Yield Maps for Single and Bilayer Thin Films Under Scratch.  Journal of Tribology.  138:031402. 2016
• Design Tools for Patterned Self-Folding Reconfigurable Structures Based on Programmable Active Laminates.  Journal of Mechanisms and Robotics.  8:031015. 2016
• Numerical Investigation on the Selection of the System Outputs for Feedback Vibration Control of a Smart Blade Section.  Journal of Vibration and Acoustics: Transactions of the ASME.  138:031013. 2016
• Rotordynamic Force Prediction of a Shrouded Centrifugal Pump Impeller-Part I: Numerical Analysis 2016
• Rotordynamic Force Prediction of a Shrouded Centrifugal Pump Impeller-Part II: Stability Analysis.  Journal of Vibration and Acoustics: Transactions of the ASME.  138:031015. 2016
• Rotordynamic Performance of a Negative-Swirl Brake for a Tooth-on-Stator Labyrinth Seal.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  138:062505. 2016
• Full-Scale Turbine Vane Endwall Film-Cooling Effectiveness Distribution Using Pressure-Sensitive Paint Technique 2016
• Parameterized Design Optimization of a Magnetohydrodynamic Liquid Metal Active Cooling Concept 2016
• Cooling Capacity Figure of Merit for Phase Change Materials 2016
• Effects of High Frequency Droplet Train Impingement on Crown Propagation Dynamics and Heat Transfer.  Journal of Heat Transfer: Transactions of the ASME.  138:020903. 2016
• Effects of High Frequency Droplet Train Impingement on Spreading-Splashing Transition, Film Hydrodynamics and Heat Transfer.  Journal of Heat Transfer: Transactions of the ASME.  138:020902. 2016
• Forced Coefficients for a Short Length, Open Ends Squeeze Film Damper With End Grooves: Experiments and Predictions 2016
• High-Definition Metrology Enabled Surface Variation Control by Cutting Load Balancing 2016
• Orbit-Model Force Coefficients for Fluid Film Bearings: A Step Beyond Linearization.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  138:022502. 2016
• The Ultrahigh Efficiency Gas Turbine Engine With Stator Internal Combustion.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  138:021506. 2016
• Visualization of the Evaporating Liquid-Vapor Interface in Micropillar Arrays.  Journal of Heat Transfer: Transactions of the ASME.  138:020910. 2016
• Computationally Efficient Dynamics Modeling for Downhole Drilling System Integrating Finite Element and Transfer Matrix 2016
• Ecological Principles and Metrics for Improving Material Cycling Structures in Manufacturing Networks 2016
• Fundamental Study on Laser Interactions With Nanoparticles-Reinforced MetalsPart I: Effect of Nanoparticles on Optical Reflectivity, Specific Heat, and Thermal Conductivity 2016
• Fundamental Study on Laser Interactions With Nanoparticles-Reinforced MetalsPart II: Effect of Nanoparticles on Surface Tension, Viscosity, and Laser Melting 2016
• Variance-Based Sensitivity Analysis to Support Simulation-Based Design Under Uncertainty.  Journal of Mechanical Design.  138:111410. 2016
• Automated Three-Dimensional Reconstruction of the Left Ventricle From Multiple-Axis Echocardiography..  Journal of Biomechanical Engineering.  138:011003. 2016
• Structural and Rotordynamic Force Coefficients of a Shimmed Bump Foil Bearing: An Assessment of a Simple Engineering Practice 2016
• Shock-Based Experimental Investigation of the Linear Particle Chain Impact Damper.  Journal of Vibration and Acoustics: Transactions of the ASME.  137:061012. 2015
• The Role of Shape and Heart Rate on the Performance of the Left Ventricle..  Journal of Biomechanical Engineering.  137:114501. 2015
• Direct Single-Stage Processing of Lightweight Alloys Into Sheet by Hybrid Cutting-Extrusion 2015
• Simulation of Multiliquid-Layer Sloshing With Vessel Motion by Using Moving Particle Semi-Implicit Method 2015
• Three-Dimensional Dynamic Model of TEHD Tilting-Pad Journal Bearing-Part I: Theoretical Modeling.  Journal of Tribology.  137:041703. 2015
• Three-Dimensional Dynamic Model of TEHD Tilting-Pad Journal Bearing-Part II: Parametric Studies.  Journal of Tribology.  137:041704. 2015
• Wear Mechanisms of Gray Cast Iron in the Presence of Environmentally Friendly Hydrofluoroolefin-Based Refrigerant and the Effect of Tribofilm Formation.  Journal of Tribology.  137:041602. 2015
• Computation of Lower Bounds for a Multiple Depot, Multiple Vehicle Routing Problem With Motion Constraints.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  137:094501. 2015
• Effect of Pad Flexibility on the Performance of Tilting Pad Journal Bearings-Benchmarking a Predictive Model.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  137:122503. 2015
• Enhanced Specific Heat Capacity of Molten Salt-Based Carbon Nanotubes Nanomaterials 2015
• VIBRATION MODELING AND EXPERIMENTAL RESULTS OF TWO PHASE TWIN-SCREW PUMP 2015
• Magneto-Gas Kinetic Method for Nonideal Magnetohydrodynamics Flows: Verification Protocol and Plasma Jet Simulations.  Journal of Fluids Engineering.  137:081302. 2015
• Creating Reduced Kinetics Models That Satisfy the Entropy Inequality.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  137:071504. 2015
• Experimental Identification of Dynamic Force Coefficients for a 110 MM Compliantly Damped Hybrid Gas Bearing.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  137:072502. 2015
• Investigation of Buoyancy Effects on Heat Transfer Characteristics of Supercritical Carbon Dioxide in Heating Mode.  Journal of Nuclear Engineering and Radiation Science.  1:031001. 2015
• On Void Coalescence Under Combined Tension and Shear.  Journal of Applied Mechanics.  82:071005. 2015
• Special Issue: Alan Needleman Symposium: New Frontiers in the Mechanics of Materials Biographical Sketch of Alan Needleman (2015).  Journal of Applied Mechanics.  82:070201. 2015
• Thermal Performance of Microencapsulated Phase Change Material Slurry in a Coil Heat Exchanger.  Journal of Heat Transfer: Transactions of the ASME.  137:071801. 2015
• Lattice Rotation Patterns and Strain Gradient Effects in Face-Centered-Cubic Single Crystals Under Spherical Indentation.  Journal of Applied Mechanics.  82:061007. 2015
• Synthesizing Robust Communication Networks for Unmanned Aerial Vehicles With Resource Constraints.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  137:061001. 2015
• A Combined Experimental and Numerical Study of the Turbine Blade Tip Film Cooling Effectiveness Under Rotation Condition.  Journal of Turbomachinery.  137:051009. 2015
• An All-Metal Compliant Seal Versus a Labyrinth Seal: A Comparison of Gas Leakage at High Temperatures.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  137:052504. 2015
• On the Predicted Performance of Oil Lubricated Thrust Collars in Integrally Geared Compressors.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  137:052502. 2015
• Correlation of the Volumetric Tool Wear Rate of Carbide Milling Inserts With the Material Removal Rate of Ti6Al4V 2015
• Device-based in vitro techniques for mechanical stimulation of vascular cells: a review..  Journal of Biomechanical Engineering.  137:040801. 2015
• Study of insertion force and deformation for suturing with precurved NiTi guidewire..  Journal of Biomechanical Engineering.  137:041004. 2015
• Characterization of the Behavior of Confined Laminar Round Jets.  Journal of Fluids Engineering.  137:034501. 2015
• Cohesive-Shear-Lag Modeling of Interfacial Stress Transfer Between a Monolayer Graphene and a Polymer Substrate.  Journal of Applied Mechanics.  82:031005. 2015
• Designing Optimal Origami Structures by Computational Evolutionary Embryogeny.  Journal of Computing and Information Science in Engineering.  15:011010. 2015
• Experimental Performance of an Open Ends, Centrally Grooved, Squeeze Film Damper Operating With Large Amplitude Orbital Motions 2015
• Experimental Study of the Type VI Stilling Basin Performance 2015
• Heat Transfer in Rotating Serpentine Coolant Passage With Ribbed Walls at Low Mach Numbers.  Journal of Thermal Science and Engineering Applications.  7:011013. 2015
• Periodic-Node Graph-Based Framework for Stochastic Control of Small Aerial Vehicles.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  137:031002. 2015
• Prediction of Gas Thrust Foil Bearing Performance for Oil-Free Automotive Turbochargers.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  137:032502-10. 2015
• ANFIS Driven Strain Control of Thin-Shape Memory Alloy Wires Using Seebeck Voltage of a Shape Memory AlloyConstantan Thermocouple.  Journal of Vibration and Acoustics: Transactions of the ASME.  137:011008. 2015
• Effect of Dispersion Homogeneity on Specific Heat Capacity Enhancement of Molten Salt Nanomaterials Using Carbon Nanotubes 2015
• Empirical Studies of Designer Thinking: Past, Present, and Future.  Journal of Mechanical Design.  137:021101. 2015
• Experimental Implementation of Opposed Shape Memory Alloy Wires for Actuator Control.  Journal of Vibration and Acoustics: Transactions of the ASME.  137:011007. 2015
• Magnetic Bearing Rotordynamic System Optimization Using Multi-Objective Genetic Algorithms 2015
• Modeling of Dry-Out Incipience for Flow Boiling in a Circular Microchannel at a Uniform Heat Flux.  Journal of Heat Transfer: Transactions of the ASME.  137:021502. 2015
• The Correlation of the Volumetric Wear Rate of Turning Tool Inserts With Carbide Grain Sizes 2015
• The Effect of Rate Dependence on Localization of Deformation and Failure in Softening Solids.  Journal of Applied Mechanics.  82:021002. 2015
• Tilting Pad Journal Bearings: On Bridging the Hot Gap Between Experimental Results and Model Predictions 2015
• A Study on Outcome Framing and Risk Attitude in Engineering Decisions Under Uncertainty.  Journal of Mechanical Design.  137:084501. 2015
• Modal Reduction Technique for Predicting the Onset of Chaotic Behavior due to Lateral Vibrations in Drillstrings.  Journal of Vibration and Acoustics: Transactions of the ASME.  137:021003. 2015
• P3GA: An Algorithm for Technology Characterization.  Journal of Mechanical Design.  137:011401. 2015
• Waste Heat Recovery Potential of Advanced Internal Combustion Engine Technologies 2015
• A Simple Treatment of Constraint Forces and Constraint Moments in the Dynamics of Rigid Bodies 2015
• Optimal Setpoints for HVAC Systems via Iterative Cooperative Neighbor Communication 2015
• A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing 2014
• Additive Manufacturing of Glass 2014
• Heat Transfer and Pressure Loss Measurements in a Turbulated High Aspect Ratio Channel With Large Reynolds Number Flows 2014
• Influence of Coolant Density on Turbine Platform Film-Cooling With Stator-Rotor Purge Flow and Compound-Angle Holes 2014
• Modeling of Temperature Distribution in Moving Webs in Roll-to-Roll Manufacturing.  Journal of Thermal Science and Engineering Applications.  6:041012. 2014
• Surface Finish of Ball-End Milled Microchannels.  Journal of Micro and Nano-Manufacturing.  2:041005. 2014
• Optimizing Laminar Natural Convection for a Heat Generating Cylinder in a Channel.  Journal of Heat Transfer: Transactions of the ASME.  136:112502. 2014
• Exploring Automated Text Classification to Improve Keyword Corpus Search Results for Bioinspired Design.  Journal of Mechanical Design.  136:111103. 2014
• SPECIAL ISSUE: BIOLOGICALLY INSPIRED DESIGN.  Journal of Mechanical Design.  136:110301. 2014
• A Novel Method to Design and Optimize Flat-Foldable Origami Structures Through a Genetic Algorithm.  Journal of Computing and Information Science in Engineering.  14:031008. 2014
• Experimental Investigation of the Effect of Purge Flow on Film Cooling Effectiveness on a Rotating Turbine With Nonaxisymmetric End Wall Contouring.  Journal of Turbomachinery.  136:091009. 2014
• Heat Transfer Measurements in Rotating Blade–Shape Serpentine Coolant Passage With Ribbed Walls at High Reynolds Numbers.  Journal of Turbomachinery.  136:091004. 2014
• Observer Design for Axial Flow Compressor.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  136:051017. 2014
• Real-Time Analysis of Engine Power, Thermal Efficiency, and Emission Characteristics Using Refined and Transesterified Waste Vegetable Oil 2014
• Design and Optimization of a Contact-Aided Compliant Mechanism for Passive Bending.  Journal of Mechanisms and Robotics.  6:031013. 2014
• Nanofiber Cathode Catalyst Layer Model for a Proton Exchange Membrane Fuel Cell.  Journal of Fuel Cell Science and Technology.  11:041007. 2014
• The effect of static and dynamic loading on degradation of PLLA stent fibers..  Journal of Biomechanical Engineering.  136:081006. 2014
• A General Approach for Current-Based Condition Monitoring of Induction Motors.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  136:041024. 2014
• Evaluating the Directed Intuitive Approach for Bioinspired Design.  Journal of Mechanical Design.  136:071012. 2014
• Experimental Flow-Field Investigations Downstream a Scaled-Up Micro-Tangential-Jet Scheme Using the Particle Image Velocimetry Technique.  Journal of Fluids Engineering.  136:071204. 2014
• Simulations and Analysis of the Reshocked Inclined Interface Richtmyer-Meshkov Instability for Linear and Nonlinear Interface Perturbations.  Journal of Fluids Engineering.  136:071203. 2014
• Technology Characterization Models and Their Use in Systems Design 2014
• Three-Dimensional Thermohydrodynamic Morton Effect Analysis-Part II: Parametric Studies.  Journal of Tribology.  136:031707. 2014
• Three-Dimensional Thermohydrodynamic Morton Effect Simulation-Part I: Theoretical Model 2014
• Thrust Force Characterization of Oscillating Cantilevers Operating Near Resonance.  Journal of Fluids Engineering.  136:071206. 2014
• A Computational Framework to Evaluate the Effectiveness of Intrasaccular Therapies for Cerebral Aneurysms.  Journal of Medical Devices.  8:020943. 2014
• Analytical and Experimental Investigation of Thermocapillary Flow in Pulsed Laser Micropolishing 2014
• Design and Characterization of a Resistively Heated Shape Memory Polymer Micro-Release Device 2014
• Design and Characterization of an Endovascular Mechanical Thrombectomy Device.  Journal of Medical Devices.  8:020910. 2014
• Fluid Flow and Heat Transfer Characteristics of Microencapsulated Phase Change Material Slurry in Turbulent Flow.  Journal of Heat Transfer: Transactions of the ASME.  136:061704. 2014
• Impingement Heat Transfer From Jet Arrays on Turbulated Target Walls at Large Reynolds Numbers 2014
• In Vitro Mechanical Evaluation of Mandibular Bone Transport Devices.  Journal of Medical Devices.  8:021004. 2014
• Partially-Averaged Navier-Stokes Simulations of High-Speed Mixing Environment 2014
• Silicone-Based Tissue-Mimicking Phantom for Needle Insertion Simulation.  Journal of Medical Devices.  8:021001. 2014
• The Turbulent Schmidt Number 2014
• Aero-Elastic-Control-Floater-Mooring Coupled Dynamic Analysis of Floating Offshore Wind Turbine in Maximum Operation and Survival Conditions 2014
• Effect of Coolant Density on Leading Edge Showerhead Film Cooling Using the Pressure Sensitive Paint Measurement Technique.  Journal of Turbomachinery.  136:051011. 2014
• Measurements Versus Predictions for the Static and Dynamic Characteristics of a Four-Pad, Rocker-Pivot, Tilting-Pad Journal Bearing 2014
• A Theoretical Assessment of Surface Defect Machining and Hot Machining of Nanocrystalline Silicon Carbide 2014
• Comments on a Newly-Identified Destabilizing Rotordynamic Mechanism Arising in Vertical Hydraulic Turbines and the Back Shrouds of Centrifugal Impellers.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  136:042502. 2014
• Influence of Coolant Density on Turbine Blade Film-Cooling With Axial and Compound Shaped Holes 2014
• Nonlinear Viscoelastic Behavior of Active Fiber Composites 2014
• On the Fracture Toughness of Pseudoelastic Shape Memory Alloys.  Journal of Applied Mechanics.  81:041005. 2014
• Real-Time Identification of Incipient Surface Morphology Variations in Ultraprecision Machining Process 2014
• The Impact of Hole Depth on the Rotordynamic and Leakage Characteristics of Hole-Pattern-Stator Gas Annular Seals.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  136:042501. 2014
• Effective Yield Criterion Accounting for Microvoid Coalescence 2014
• Energy Harvesting of Piezoelectric Stack Actuator From a Shock Event.  Journal of Vibration and Acoustics: Transactions of the ASME.  136:011016. 2014
• Prediction of the Onset of Flow Instability in a Single Horizontal Microtube With an Inlet Orifice.  Journal of Heat Transfer: Transactions of the ASME.  136:022903. 2014
• Static and Rotordynamic Characteristics for a New Hole-Pattern Annular Gas Seal Design Incorporating Larger Diameter Holes.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  136:022507. 2014
• Applied Tests of Design Skills-Part III: Abstract Reasoning.  Journal of Mechanical Design.  136:101101. 2014
• Biomechanics of the canine mandible during bone transport distraction osteogenesis..  Journal of Biomechanical Engineering.  136:1110111-1110118. 2014
• On the Effect of Latent Heat on the Fracture Toughness of Pseudoelastic Shape Memory Alloys.  Journal of Applied Mechanics.  81:101006. 2014
• Subject-specific finite element modeling of the tibiofemoral joint based on CT, magnetic resonance imaging and dynamic stereo-radiography data in vivo..  Journal of Biomechanical Engineering.  136:0410041-0410048. 2014
• Thermodynamic Considerations for Advanced, High Efficiency IC Engines.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  136:101512. 2014
• Capturing three-dimensional in vivo lumbar intervertebral joint kinematics using dynamic stereo-X-ray imaging..  Journal of Biomechanical Engineering.  136:011004. 2014
• Measured Comparison of Leakage and Rotordynamic Characteristics for a Slanted-Tooth and a Straight-Tooth Labyrinth Seal 2014
• Numerical Study on the Effect of Real Syngas Compositions on Ignition Delay Times and Laminar Flame Speeds at Gas Turbine Conditions 2014
• Melt Pool Flow and Surface Evolution During Pulsed Laser Micro Polishing of Ti6Al4V 2013
• Mining Functional Model Graphs to Find Product Design Heuristics With Inclusive Design Illustration.  Journal of Computing and Information Science in Engineering.  13:041008. 2013
• Performance Characteristics of Metal Mesh Foil Bearings: Predictions Versus Measurements.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  135. 2013
• On the Reliability of RANS and URANS Numerical Results for High-Pressure Turbine Simulations: A Benchmark Experimental and Numerical Study on Performance and Interstage Flow Behavior of High-Pressure Turbines at Design and Off-Design Conditions Using Two Different Turbine Designs 2013
• The Role of Pivot Stiffness on the Dynamic Force Coefficients of Tilting Pad Journal Bearings.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  135. 2013
• INTERACTION IN DECENTRALIZED CONTROL SYSTEMS: APPLICATION TO ROLL-TO-ROLL SYSTEMS 2013
• SYNTHESIZING ROBUST COMMUNICATION NETWORKS FOR UNMANNED AERIAL VEHICLES WITH RESOURCE CONSTRAINTS 2013
• Transient Temperature and Heat Flux Measurement in Ultrasonic Joining of Battery Tabs Using Thin-Film Microsensors 2013
• Closure to "Discussion on 'Damping and Inertia Coefficients for Two End Sealed Squeeze Film Dampers With a Central Groove: Measurements and Predictions,'" (2013, ASME Paper No. GT2013-94273)..  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  135:125502. 2013
• Damping and Inertia Coefficients for Two End Sealed Squeeze Film Dampers With a Central Groove: Measurements and Predictions.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  135:112503. 2013
• Formalizing and Exploring the Transferability of Inclusive Design Rules 2013
• Measurements of Rotordynamic Response and Temperatures in a Rotor Supported on Metal Mesh Foil Bearings.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  135:122507. 2013
• Modeling Liquid Film Evaporation in a Wetted Wall Bioaerosol Sampling Cyclone.  Journal of Thermal Science and Engineering Applications.  5:031007. 2013
• Modulation of Diastolic Filling Using an Epicardial Diastolic Recoil Device.  Journal of Medical Devices.  7:034503. 2013
• On the Failure of a Gas Foil Bearing: High Temperature Operation Without Cooling Flow.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  135:112506. 2013
• Fidelity of the estimation of the deformation gradient from data deduced from the motion of markers placed on a body that is subject to an inhomogeneous deformation field..  Journal of Biomechanical Engineering.  135:81004. 2013
• Fluid Dynamics of Condensed Droplets on Microscale Hybrid Surfaces.  Journal of Heat Transfer: Transactions of the ASME.  135:080905. 2013
• Mixing Evaluation of a Passive Scaled-Up Serpentine Micromixer With Slanted Grooves.  Journal of Fluids Engineering.  135:081102. 2013
• The Needle With Lancet Point: Geometry for Needle Tip Grinding and Tissue Insertion Force 2013
• Applied Tests of Design Skills-Part II: Visual Thinking.  Journal of Mechanical Design.  135:071004. 2013
• Biologically Inspired Design.  Journal of Mechanical Design.  135:070301. 2013
• Characterization of Flow-Magnetic Field Interactions in Magneto-Hydrodynamic Turbulence.  Journal of Computational and Nonlinear Dynamics.  8:031010. 2013
• Numerical Analysis of Circular Graphene Bubbles.  Journal of Applied Mechanics.  80:040905. 2013
• The Motion Constants of Linear Autonomous Dynamical Systems.  Applied Mechanics Reviews: an assessment of world literature in engineering sciences.  65:040803. 2013
• Uniaxial Tension of a Class of Compressible Solids With Plastic Non-Normality.  Journal of Applied Mechanics.  80:040912. 2013
• Fundamental Gas Turbine Heat Transfer 2013
• Handy-Potter: Rapid Exploration of Rotationally Symmetric Shapes Through Natural Hand Motions.  Journal of Computing and Information Science in Engineering.  13:021008. 2013
• In Vitro Study of Transcatheter Delivery of a Shape Memory Polymer Foam Embolic Device for Treating Cerebral Aneurysms.  Journal of Medical Devices.  7:020932. 2013
• Molecular Dynamics Study of Laser and Plasma Nitriding of Titanium 2013
• One Explanation for Two-Times Running Speed Response Due to Misalignment in Rotors Connected by Flexible Couplings.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  135:062501. 2013
• Rotordynamics of a Two-Phase Flow Twin Screw Pump.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  135:062502. 2013
• Workpiece Temperature During Deep-Hole Drilling of Cast Iron Using High Air Pressure Minimum Quantity Lubrication 2013
• Confocal image-based computational modeling of nitric oxide transport in a rat mesenteric lymphatic vessel. 2013
• Impingement Heat Transfer Enhancement on a Cylindrical, Leading Edge Model With Varying Jet Temperatures.  Journal of Turbomachinery.  135:031021. 2013
• Laminar Flow Forced Convection Heat Transfer Behavior of a Phase Change Material Fluid in Microchannels.  Journal of Heat Transfer: Transactions of the ASME.  135:052801. 2013
• Modeling Print Registration in Roll-to-Roll Printing Presses.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  135:031016. 2013
• Special Section on Design and Fabrication of Microscale and Nanoscale Devices for Applications in Energy, Environment, and Medicine.  Journal of Nanotechnology in Engineering and Medicine.  4. 2013
• Heat Transfer in Rotating Multipass Rectangular Ribbed Channel With and Without a Turning Vane 2013
• Effects of Pulse Duration on Laser Micro Polishing.  Journal of Micro and Nano-Manufacturing.  1:011006. 2013
• Enhanced Specific Heat Capacity of Nanomaterials Synthesized by Dispersing Silica Nanoparticles in Eutectic Mixtures.  Journal of Heat Transfer: Transactions of the ASME.  135:032801. 2013
• Effect of Inlet Restriction on Flow Boiling Heat Transfer in a Horizontal Microtube.  Journal of Heat Transfer: Transactions of the ASME.  135:021502. 2013
• Ignition Delay Time and Laminar Flame Speed Calculations for Natural Gas/Hydrogen Blends at Elevated Pressures.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  135:021504. 2013
• Laminar Flame Speed and Ignition Delay Time Data for the Kinetic Modeling of Hydrogen and Syngas Fuel Blends 2013
• Design and Optimization of a Shape Memory Alloy-Based Self-Folding Sheet.  Journal of Mechanical Design.  135:111007. 2013
• Identification of Acoustic Characteristics of Honeycomb Sandwich Composite Panels Using Hybrid Analytical/Finite Element Method.  Journal of Vibration and Acoustics: Transactions of the ASME.  135:011006. 2013
• A Nonlinear Finite Element Framework for Viscoelastic Beams Based on the High-Order Reddy Beam Theory.  Journal of Engineering Materials and Technology.  135:011005. 2013
• An Improved Model of Asperity Interaction in Normal Contact of Rough Surfaces.  Journal of Applied Mechanics.  80:011025. 2013
• Computational Aerodynamics: Solvers and Shape Optimization.  Journal of Heat Transfer: Transactions of the ASME.  135:011002. 2013
• Experimental and Numerical Evaluation of a Scaled-Up Micromixer With Groove Enhanced Division Elements.  Journal of Fluids Engineering.  135:011201. 2013
• Governing Equations for Web Tension and Web Velocity in the Presence of Nonideal Rollers.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  135:011018. 2013
• Heat Transfer Enhancement in a Rectangular (AR=3:1) Channel With V-Shaped Dimples 2013
• Improving Tilting Pad Journal Bearing Predictions-Part I: Model Development and Impact of Rotor Excited Versus Bearing Excited Impedance Coefficients 2013
• Improving Tilting-Pad Journal Bearing Predictions-Part II: Comparison of Measured and Predicted Rotor-Pad Transfer Functions for a Rocker-Pivot Tilting-Pad Journal Bearing 2013
• Morton Effect Cyclic Vibration Amplitude Determination for Tilt Pad Bearing Supported Machinery 2013
• On the Relationship Between Fuel Injection Pressure and Two-Stage Ignition Behavior of Low Temperature Diesel Combustion 2012
• A New Contact Force Model for Low Coefficient of Restitution Impact.  Journal of Applied Mechanics.  79:064506. 2012
• INFLUENCE OF UNSTEADY WAKE WITH TRAILING EDGE COOLANT EJECTION ON TURBINE BLADE FILM COOLING.  Journal of Turbomachinery.  134:435-445. 2012
• A Market-Based Design Strategy for a Universal Product Family.  Journal of Mechanical Design.  134:111007. 2012
• A Physics-Based Friction Model and Integration to a Simple Dynamical System.  Journal of Vibration and Acoustics: Transactions of the ASME.  134:051012. 2012
• Design of Radiation Tolerant Nanostructured Metallic Multilayers.  Journal of Engineering Materials and Technology.  134:041010. 2012
• Investigating the Cause of Computational Fluid Dynamics Deficiencies in Accurately Predicting the Efficiency and Performance of High Pressure Turbines: A Combined Experimental and Numerical Study.  Journal of Fluids Engineering.  134:101104. 2012
• Measurement Versus Predictions of Rotordynamic Coefficients of a Hole-Pattern Gas Seal With Negative Preswirl.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  134:122503. 2012
• On the Volumetric Assessment of Tool Wear in Machining Inserts With Complex GeometriesPart 1: Need, Methodology, and Standardization 2012
• On the Volumetric Assessment of Tool Wear in Machining Inserts With Complex GeometriesPart II: Experimental Investigation and Validation on Ti-6Al-4V 2012
• Simulation of Material Flow and Heat Evolution in Friction Stir Processing Incorporating Melting.  Journal of Engineering Materials and Technology.  134:041006. 2012
• Tilting Pad Journal Bearings-A Discussion on Stability Calculation, Frequency Dependence, and Pad and Pivot.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  134:122508. 2012
• An Elastic-Plastic Spherical Contact Model Under Combined Normal and Tangential Loading.  Journal of Applied Mechanics.  79:051001. 2012
• Collision of Two Mass Baton With Massive External Surfaces 2012
• Effect of Rib Spacing on Heat Transfer in a Two Pass Rectangular Channel (AR=2:1) at High Rotation Numbers.  Journal of Heat Transfer: Transactions of the ASME.  134:091901. 2012
• Turbulent Convection From Deterministic Roughness Distributions With Varying Thermal Conductivities.  Journal of Turbomachinery.  134:051030. 2012
• A Metal Mesh Foil Bearing and a Bump-Type Foil Bearing: Comparison of Performance for Two Similar Size Gas Bearings.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  134:102501. 2012
• Damping and Inertia Coefficients for Two Open Ends Squeeze Film Dampers With a Central Groove: Measurements and Predictions.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  134:102506. 2012
• Effect of Cooling Flow on the Operation of a Hot Rotor-Gas Foil Bearing System.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  134:102511. 2012
• Experimental Investigation of Flow Boiling Instability in a Single Horizontal Microtube With and Without Inlet Restriction.  Journal of Heat Transfer: Transactions of the ASME.  134:081501. 2012
• Floating Offshore Wind Turbine Dynamics: Large-Angle Motions in Euler-Space 2012
• Guest Editorial for the Special Issue on Micro/Nanoscale Transport Phenomena.  Journal of Nanotechnology in Engineering and Medicine.  3:030301. 2012
• Modeling the Onset of Gas Entrainment in a Reduced T-Junction With Co-Current Stratified Gas-Liquid Flow.  Journal of Fluids Engineering.  134:081303. 2012
• On the Effect of Thermal Energy Transport to the Performance of (Semi) Floating Ring Bearing Systems for Automotive Turbochargers.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  134:102507. 2012
• Unsteady Wake and Coolant Density Effects on Turbine Blade Film Cooling Using Pressure Sensitive Paint Technique.  Journal of Heat Transfer: Transactions of the ASME.  134:081701. 2012
• A New, Iterative, Synchronous-Response Algorithm for Analyzing the Morton Effect.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  134:072501. 2012
• Adapting ADA Architectural Design Knowledge for Universal Product Design Using Association Rule Mining: A Function Based Approach.  Journal of Mechanical Design.  134:071003. 2012
• Catcher Bearing Life Prediction Using a Rainflow Counting Approach 2012
• Dry-Friction Whip and Whirl Predictions for a Rotor-Stator Model With Rubbing Contact at Two Locations.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  134:072502. 2012
• Comparison of Ultrasonic Wave Radiation Effects on Asphaltene Aggregation in Toluene-Pentane Mixture Between Heavy and Extra Heavy Crude Oils 2012
• A Novel Bulk-Flow Model for Improved Predictions of Force Coefficients in Grooved Oil Seals Operating Eccentrically.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  134:052509. 2012
• Assessment of Current Chemiluminescence Kinetics Models at Engine Conditions.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  134:051501. 2012
• Effect of Compliance and Backlash on the Output Speed of a Mechanical Transmission System.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  134:031010. 2012
• Influence of Coolant Density on Turbine Blade Film-Cooling Using Pressure Sensitive Paint Technique 2012
• Measured Static and Rotordynamic Coefficient Results for a Rocker-Pivot, Tilting-Pad Bearing With 50 and 60% Offsets.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  134:052505. 2012
• Prediction of Ductile Fracture Surface Roughness Scaling.  Journal of Applied Mechanics.  79:031015. 2012
• Influence of Nanomaterials in Polymer Composites on Thermal Conductivity 2012
• Rotordynamic Force Coefficients for Three Types of Annular Gas Seals With Inlet Preswirl and High Differential Pressure Ratio.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  134:042503. 2012
• The Influence of Lattice Misfit on the Atomic Structures and Defect Energetics of Face Centered CubicBody Centered Cubic Interfaces.  Journal of Engineering Materials and Technology.  134:021012. 2012
• Design of a Radiolucent Cranial Fixation Device.  Journal of Medical Devices.  6:017546-1. 2012
• Effects of Inlet Temperature Uniformity and Nonuniformity on the Tip Leakage Flow and Rotor Blade Tip and Casing Heat Transfer Characteristics.  Journal of Turbomachinery.  134:021001. 2012
• HepatoSeal Multimodal Mono-Bipolar Device for Liver Resection Surgery.  Journal of Medical Devices.  6:017613-1. 2012
• Rotordynamic Force Coefficients of Bubbly Mixture Annular Pressure Seals 2012
• Workpiece Thermal Distortion in Minimum Quantity Lubrication Deep Hole Drilling-Finite Element Modeling and Experimental Validation 2012
• An Inverse Heat Transfer Method for Determining Workpiece Temperature in Minimum Quantity Lubrication Deep Hole Drilling 2012
• Applied Tests of Design Skills-Part 1: Divergent Thinking.  Journal of Mechanical Design.  134:021005. 2012
• Influence of Shearing Surface Topography on Frictional Properties of ZnS Nanowire-Based Lubrication System across Ductile Surfaces.  Journal of Tribology.  134:022001. 2012
• Prediction of Aeroacoustic Resonance in Cavities of Hole-Pattern Stator Seals.  Mechanical engineering (New York, N.Y. : 1919).  134:49-50. 2012
• Uncertain Technology Evolution and Decision Making in Design.  Journal of Mechanical Design.  134:100904. 2012
• ENDWALL CONTOURING USING CONTINIOUS DIFFUSION, A BREAKTHROUGH METHOD AND ITS APPLICATION TO A THREE-STAGE HIGH PRESSURE TURBINE.  Journal of Turbomachinery.  136:787-797. 2012
• Effect of Flow Parameter Variations on Full Coverage Film-Cooling Effectiveness for a Gas Turbine Blade 2012
• Influence of Channel Orientation on Heat Transfer in a Two-Pass Smooth and Ribbed Rectangular Channel (AR=2:1) Under Large Rotation Numbers.  Journal of Turbomachinery.  134:011022. 2012
• Assessment of Minimally Invasive Device That Provides Simultaneous Adjustable Cardiac Support and Active Synchronous Assist in an Acute Heart Failure Model.  Journal of Medical Devices.  5:041008. 2011
• Development of a Non-Blood Contacting Cardiac Assist and Support Device: An In Vivo Proof of Concept Study.  Journal of Medical Devices.  5:041007. 2011
• Numerical Study of Film Cooling Scheme on a Blunt-Nosed Body in Hypersonic Flow.  Journal of Thermal Science and Engineering Applications.  3:044501-7. 2011
• Design of a Test Rig for Vibration Control of Oil Platforms Using Magneto-Rheological Dampers.  Journal of Offshore Mechanics and Arctic Engineering: Transactions of the ASME.  133:041302. 2011
• Resonant Frequencies in Web Process Lines Due to Idle Rollers and Spans.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  133:061018. 2011
• A device to study the effects of stretch gradients on cell behavior..  Journal of Biomechanical Engineering.  133:101008. 2011
• Effect of Density Ratio on Flat Plate Film Cooling With Shaped Holes Using PSP.  Journal of Turbomachinery.  133:041011. 2011
• Effect of Freestream Turbulence Intensity on Film Cooling Jet Structure and Surface Effectiveness Using PIV and PSP 2011
• Effect of Upstream Step on Flat Plate Film-Cooling Effectiveness Using PSP 2011
• Automotive Transmission Clutch Fill Control Using a Customized Dynamic Programming Method 2011
• Friction Factor Behavior From Flat-Plate Tests of Smooth and Hole-Pattern Roughened Surfaces With Supply Pressures up to 84 bars 2011
• Heat Transfer and Pressure Drop Correlations for Square Channels With V-Shaped Ribs at High Reynolds Numbers.  Journal of Heat Transfer: Transactions of the ASME.  133:111901. 2011
• Identification and Prediction of Force Coefficients in a Five-Pad and Four-Pad Tilting Pad Bearing for Load-on-Pad and Load-Between-Pad Configurations.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  133:092503. 2011
• Laminar Flame Speed Measurements and Modeling of Pure Alkanes and Alkane Blends at Elevated Pressures 2011
• Drill-String Dynamics: Reduced-Order Models and Experimental Studies.  Journal of Vibration and Acoustics: Transactions of the ASME.  133:041008. 2011
• Metal Mesh Foil Bearing: Effect of Motion Amplitude, Rotor Speed, Static Load, and Excitation Frequency on Force Coefficients.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  133:122503. 2011
• Rotordynamic Characteristics of a Five Pad, Rocker-Pivot, Tilting Pad Bearing in a Load-on-Pad Configuration; Comparisons to Predictions and Load-Between-Pad Results 2011
• Design and Development of a Sun Tracking Mechanism Using the Direct SMA Actuation.  Journal of Mechanical Design.  133:075001. 2011
• Effects of Interfacial Friction Distribution on the Superplastic Forming of AA5083.  Journal of Engineering Materials and Technology.  133:031008. 2011
• Heat Transfer and Pressure Drop Measurements for a Square Channel With 45 deg Round-Edged Ribs at High Reynolds Numbers 2011
• Robust Control of the Elastodynamic Vibrations of a Flexible Rotor System With Discontinuous Friction.  Journal of Vibration and Acoustics: Transactions of the ASME.  133:034501. 2011
• Thermal Management and Rotordynamic Performance of a Hot Rotor-Gas Foil Bearings System-Part I: Measurements 2011
• Thermal Management and Rotordynamic Performance of a Hot Rotor-Gas Foil Bearings System-Part II: Predictions Versus Test Data 2011
• Vibration Amplitude in Rotary Ultrasonic Machining: A Novel Measurement Method and Effects of Process Variables 2011
• Co-Current Gas-Liquid Smooth-Stratified Flow in a Horizontal Reduced T-Junction Including Wavy and Slug Regime Transition Boundaries.  Journal of Fluids Engineering.  133:051301. 2011
• Identification of Rotordynamic Force Coefficients of a Metal Mesh Foil Bearing Using Impact Load Excitations.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  133:112501. 2011
• Modeling and Simulation of Capillary Microfluidic Networks Based on Electrical Analogies.  Journal of Fluids Engineering.  133:054502. 2011
• Shock Absorption Using Linear Particle Chains With Multiple Impacts.  Journal of Applied Mechanics.  78:031005. 2011
• High Rotation Number Effects on Heat Transfer in a Rectangular (AR=2:1) Two-Pass Channel.  Journal of Turbomachinery.  133:021001. 2011
• In vivo stress analysis of a pacing lead from an angiographic sequence..  Journal of Biomechanical Engineering.  133:041004. 2011
• Advanced Deconvolution Technique for Analyzing Multirate Well Test Data 2011
• Identification of Structural Stiffness and Energy Dissipation Parameters in a Second Generation Foil Bearing: Effect of Shaft Temperature.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  133:032501. 2011
• Surface Roughness Effects on Energy Dissipation in Fretting Contact of Nominally Flat Surfaces.  Journal of Applied Mechanics.  78:021011. 2011
• A New Analysis Tool Assessment for Rotordynamic Modeling of Gas Foil Bearings 2011
• Biologically Meaningful Keywords for Functional Terms of the Functional Basis.  Journal of Mechanical Design.  133:021007. 2011
• Enhanced Specific Heat of Silica Nanofluid 2011
• Prediction of Aeroacoustic Resonance in Cavities of Hole-Pattern Stator Seals 2011
• Magnetohydrodynamic Turbulence Decay Under the Influence of Uniform or Random Magnetic Fields.  Journal of Fluids Engineering.  133:081205. 2011
• Numerical Simulations and Experimental Characterization of Heat Transfer From a Periodic Impingement of Droplets.  Journal of Heat Transfer: Transactions of the ASME.  133:122201. 2011
• Creep Responses of Smart Sandwich Composites at Multiple Length Scales: Experiments and Modeling 2011
• Direct Linearization via the Gibbs Function.  Journal of Computational and Nonlinear Dynamics.  6:011006. 2011
• Optimal Trajectory Generation With Probabilistic System Uncertainty Using Polynomial Chaos.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  133:014501. 2011
• A Process for Design, Verification, Validation, and Manufacture of Medical Devices Using Immersive VR Environments 2010
• Modeling of Deformation-Accelerated Breakdown of Polylactic Acid Biodegradable Stents.  Journal of Medical Devices.  4:041007. 2010
• Partially Averaged Navier-Stokes (PANS) Method for Turbulence Simulations-Flow Past a Square Cylinder.  Journal of Fluids Engineering.  132:121203. 2010
• Partially Averaged Navier-Stokes (PANS) Method for Turbulence Simulations: Flow Past a Circular Cylinder.  Journal of Fluids Engineering.  132:121202. 2010
• A Hybrid Sensitivity Analysis for Use in Early Design.  Journal of Mechanical Design.  132:111007. 2010
• Nonhyperelastic Nature of an Elastomeric High Strain Material 2010
• Pulsatile flow effects on the hemodynamics of intracranial aneurysms..  Journal of Biomechanical Engineering.  132:111009. 2010
• The effect of implantation orientation of a bileaflet mechanical heart valve on kinematics and hemodynamics in an anatomic aorta..  Journal of Biomechanical Engineering.  132:111005. 2010
• Erratum: Application of Elastic-Plastic Static Friction Models to Rough Surfaces With Asymmetric Asperity Distribution [Journal of Tribology, 2010, 132(3), p. 031602].  Journal of Tribology.  132:047001. 2010
• Film-Cooling Effectiveness on a Rotating Turbine Platform Using Pressure Sensitive Paint Technique.  Journal of Turbomachinery.  132:041001-13. 2010
• Impact of a Fixed-Length Rigid Cylinder on an Elastic-Plastic Homogeneous Body.  Journal of Tribology.  132:041402. 2010
• Nonlinear Dynamic Behavior of Turbocharger Rotor-Bearing Systems With Hydrodynamic Oil Film and Squeeze Film Damper in Series: Prediction and Experiment 2010
• Impacting Designer Creativity Through IT-Enabled Concept Generation.  Journal of Computing and Information Science in Engineering.  10:031007. 2010
• Magnetically Suspended VSCMGs for Simultaneous Attitude Control and Power Transfer IPAC Service 2010
• Rotordynamic Stability Predictions for Centrifugal Compressors Using a Bulk-Flow Model to Predict Impeller Shroud Force and Moment Coefficients 2010
• Modeling and Theory of Intermittent Motions in a Machine Tool With a Friction Boundary 2010
• Predicted Rotordynamic Behavior of a Labyrinth Seal as Rotor Surface Speed Approaches Mach 1.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  132:112504. 2010
• A Model for Improved Prediction of Force Coefficients in Grooved Squeeze Film Dampers and Oil Seal Rings 2010
• Application of Elastic-Plastic Static Friction Models to Rough Surfaces With Asymmetric Asperity Distribution.  Journal of Tribology.  132:031602-11. 2010
• Direct Numerical Simulation of Near Field Thermal Radiation Based on Wiener Chaos Expansion of Thermal Fluctuating Current 2010
• High Rotation Number Effect on Heat Transfer in a Triangular Channel With 45 deg, Inverted 45 deg, and 90 deg Ribs 2010
• Identification of Force Coefficients in a Squeeze Film Damper With a Mechanical Seal: Large Contact Force 2010
• Review on the Constitutive Models of Tumor Tissue for Computational Analysis.  Applied Mechanics Reviews: an assessment of world literature in engineering sciences.  63:040801-0408017. 2010
• Rotary Ultrasonic Machining of Dental Ceramics: A Preliminary Study on Subsurface Cracks.  Journal of Medical Devices.  4:027516-1. 2010
• Ignition and Oxidation of 50/50 Butane Isomer Blends 2010
• Recent Studies on Buckling of Carbon Nanotubes.  Applied Mechanics Reviews: an assessment of world literature in engineering sciences.  63:030804-18. 2010
• The Effects of Inner-Liquid Motion on LNG Vessel Responses 2010
• The Hermite Moment Model for Highly Skewed Response With Application to Tension Leg Platforms 2010
• Analytical Modeling of Annular Flow Boiling Heat Transfer in Mini- and Microchannel Heat Sinks.  Journal of Heat Transfer: Transactions of the ASME.  132:041012-11. 2010
• Assessment of Elliptical Conformal Hertz Analysis Applied to Constant Velocity Joints.  Journal of Tribology.  132:024501-3. 2010
• Experimental Analysis of Microchannel Entrance Length Characteristics Using Microparticle Image Velocimetry.  Journal of Fluids Engineering.  132:041102-04110213. 2010
• Experimental and FEA Scratch of Magnetic Storage Thin-Film Disks to Correlate Magnetic Signal Degradation With Permanent Deformation.  Journal of Tribology.  132:021902-11. 2010
• Identification of Squeeze Film Damper Force Coefficients From Multiple-Frequency Noncircular Journal Motions 2010
• Rotordynamic Force Coefficients of a Hybrid Brush Seal: Measurements and Predictions 2010
• Thermohydrodynamic Analysis of Bump Type Gas Foil Bearings: A Model Anchored to Test Data 2010
• Measurement of Structural Stiffness and Damping Coefficients in a Metal Mesh Foil Bearing 2010
• Modeling, Analysis, and Optimal Design of the Automotive Transmission Ball Capsule System 2010
• Turbocharger Nonlinear Response With Engine-Induced Excitations: Predictions and Test Data 2010
• Combined Steady State and Transient Analysis of a Patrol Vessel as Affected by Varying Amounts of Damping and Periodic and Random Wave Excitation 2010
• Ignition and Flame Speed Kinetics of Two Natural Gas Blends With High Levels of Heavier Hydrocarbons.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  132:021504. 2010
• Linear and Nonlinear Approach of Hydropneumatic Tensioner Modeling for Spar Global Performance 2010
• Biodiesel Effects on Influencing Parameters of Brake Fuel Conversion Efficiency in a Medium Duty Diesel Engine.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  132:122801. 2010
• Using Parameterized Pareto Sets to Model Design Concepts.  Journal of Mechanical Design.  132:041007-04100711. 2010
• Using Support Vector Machines to Formalize the Valid Input Domain of Predictive Models in Systems Design Problems.  Journal of Mechanical Design.  132:101001. 2010
• Optimal Web Guiding.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  132:011006-10. 2010
• Stable controller interpolation and controller switching for LPV systems.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  132:011007-12. 2010
• Thermohydrodynamic Model Predictions and Performance Measurements of Bump-Type Foil Bearing for Oil-Free Turboshaft Engines in Rotorcraft Propulsion Systems.  Journal of Tribology.  132:1-11. 2010
• Cooling Performance of Arrays of Vibrating Cantilevers.  Journal of Heat Transfer: Transactions of the ASME.  131:111401-8. 2009
• Second-Order Low-Frequency Wave Forces on a SPM Offloading Tanker in Shallow Water 2009
• Static Performance Characteristics and Rotordynamic Coefficients for a Four-Pad Ball-in-Socket Tilting Pad Journal Bearing.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  131:062502. 2009
• Characterization of a Foil Bearing Structure at Increasing Temperatures: Static Load and Dynamic Force Performance 2009
• Heat Transfer in Leading Edge, Triangular Shaped Cooling Channels With Angled Ribs Under High Rotation Numbers 2009
• Prediction of Film Cooling and Heat Transfer on a Rotating Blade Platform With Stator-Rotor Purge and Discrete Film-Hole Flows in a 1-1/2 Turbine Stage 2009
• Real-Time Estimation of Mean Remaining Life Using Sensor-Based Degradation Models 2009
• Turbine Blade Platform Film Cooling With Typical Stator-Rotor Purge Flow and Discrete-Hole Film Cooling.  Journal of Turbomachinery.  131:041004-11. 2009
• Autonomous Control Strategies for Very High Temperature Reactor Based Systems for Hydrogen Production 2009
• TRU-Fueled Very High Temperature Reactors for Applications Requiring an Extended Operation With Minimized Control and No Refueling 2009
• Dynamic effect of heat shock pretreatment on apoptotic responses to TNF-alpha in liver cells..  Journal of Biomechanical Engineering.  131:071003. 2009
• Direct Linearization of Continuous and Hybrid Dynamical Systems.  Journal of Computational and Nonlinear Dynamics.  4:031002-11. 2009
• Effect of Inlet Flow Angle on Gas Turbine Blade Tip Film Cooling.  Journal of Turbomachinery.  131:031005. 2009
• Heat Transfer and Pressure Drop Correlations for Square Channels With 45 Deg Ribs at High Reynolds Numbers 2009
• Nonlinear Identification of Mechanical Parameters in a Squeeze Film Damper With Integral Mechanical Seal 2009
• Temperature and Water Vapor Pressure Effects on the Friction Coefficient of Hydrogenated Diamondlike Carbon Films.  Journal of Tribology.  131:032102. 2009
• A Computational Fluid Dynamic (CFD) Tool for Optimization and Guided Implantation of Biomedical Devices.  Journal of Medical Devices.  3:027553. 2009
• INFLUENCE OF COOLANT DENSITY ON TURBINE BLADE PLATFORM FILM-COOLING.  Journal of Thermal Science and Engineering Applications.  4:287-299. 2009
• Influence of Film-Hole Shape and Angle on Showerhead Film Cooling Using PSP Technique.  Journal of Heat Transfer: Transactions of the ASME.  131:061701-11. 2009
• Computational Study of the Effects of Shock Waves on Film Cooling Effectiveness.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  131:031901. 2009
• Design and Manufacture of a Morphing Structure for a Shape-Adaptive Supersonic Wind Tunnel Nozzle.  Journal of Applied Mechanics.  76:031012-6. 2009
• Three-Dimensional Numerical Simulations of Flows Past Smooth and Rough/Bare and Helically Straked Circular Cylinders Allowed to Undergo Two Degree-of-Freedom Motions 2009
• An Approach for the Construction of Entropy Measure and Energy Map in Machine Fault Diagnosis.  Journal of Vibration and Acoustics: Transactions of the ASME.  131:024501-0245017. 2009
• Effect of Upstream Wake With Vortex on Turbine Blade Platform Film Cooling With Simulated Stator-Rotor Purge Flow.  Journal of Turbomachinery.  131:021017. 2009
• Experimental Investigation of the Clocking Effect in a 1.5-Stage Axial TurbinePart I: Time-Averaged Results 2009
• Experimental Investigation of the Clocking Effect in a 1.5-Stage Axial TurbinePart II: Unsteady Results and Boundary Layer Behavior 2009
• High Velocity Oblique Impact and Coefficient of Restitution for Head Disk Interface Operational Shock.  Journal of Tribology.  131:021903-9. 2009
• A Component Taxonomy as a Framework for Computational Design Synthesis.  Journal of Computing and Information Science in Engineering.  9:011007-10. 2009
• Effects of dressing type on 3D tissue microdeformations during negative pressure wound therapy: a computational study..  Journal of Biomechanical Engineering.  131:031012. 2009
• Modeling the Onset of Gas Entrainment in a Single Downward Discharge From a Stratified Gas-Liquid Region With Liquid Crossflow.  Journal of Fluids Engineering.  131:031304-0313048. 2009
• An Analysis of Polymer Coated Metal Rod Extrusion 2009
• Effect of Strain Nodes and Electrode Configuration on Piezoelectric Energy Harvesting From Cantilevered Beams 2009
• Stress-Strain Behavior of Perfluorosulfonic Acid Membranes at Various Temperatures and Humidities: Experiments and Phenomenological Modeling.  Journal of Fuel Cell Science and Technology.  6:011012-0110128. 2009
• A Hybrid Model to Predict the Onset of Gas Entrainment With Surface Tension Effects.  Journal of Fluids Engineering.  131:011305-01130510. 2009
• Analytical and Experimental Elastic-Plastic Impact Analysis of a Magnetic Storage Head-Disk Interface.  Journal of Tribology.  131:011902-10. 2009
• Effect of Side Feed Pressurization on the Dynamic Performance of Gas Foil Bearings: A Model Anchored to Test Data.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  131:012501. 2009
• Film-Cooling Effectiveness on a Rotating Blade Platform.  Journal of Turbomachinery.  131:011014. 2009
• Film-Cooling on a Gas Turbine Blade Pressure Side or Suction Side With Compound Angle Shaped Holes 2009
• Measurements Versus Predictions for the Rotordynamic Characteristics of a Five-Pad Rocker-Pivot Tilting-Pad Bearing in Load-Between-Pad Configuration.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  131:012507. 2009
• Measurements of Leakage and Power Loss in a Hybrid Brush Seal 2009
• TENSION METASTABLE FLUID DETECTION SYSTEMS FOR SPECIAL NUCLEAR MATERIAL DETECTION AND MONITORING 2009
• Numerically Investigating the Effects of Cross-Links in Scaled Microchannel Heat Sinks.  Journal of Fluids Engineering.  130:121103-12110313. 2008
• Quantification of Uncertainty in Reserve Estimation From Decline Curve Analysis of Production Data for Unconventional Reservoirs 2008
• Unconventional Resources 2008
• An Experimental Investigation of the Effects of the Environmental Conditions and the Channel Depth for an Air-Breathing Polymer Electrolyte Membrane Fuel Cell 2008
• Controlling Backfire for a Hydrogen-Fueled Engine Using External Mixture Injection 2008
• Hybrid Gas Bearings With Controlled Supply Pressure to Eliminate Rotor Vibrations While Crossing System Critical Speeds.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  130:062505. 2008
• Moving-Boundary Heat Exchanger Models with Variable Outlet Phase 2008
• Turbulence structure modification and drag reduction by microbubble injections in a boundary layer channel flow.  Journal of Fluids Engineering.  130:111304-1113048. 2008
• Influence of curvature and pressure gradient on turbulent wake development in curved channels 2008
• Results from an engine cycle simulation of compression ratio and expansion ratio effects on engine performance 2008
• Static and Dynamic Characteristics for a Pressure-Dam Bearing.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  130:052501. 2008
• The Solid-State Neck Growth Mechanisms in Low Energy Laser Sintering of Gold Nanoparticles: A Molecular Dynamics Simulation Study.  Journal of Heat Transfer: Transactions of the ASME.  130:092404. 2008
• Heat transfer in a two-pass rectangular channel (AR=1 : 4) under high rotation numbers.  Journal of Heat Transfer: Transactions of the ASME.  130:081701. 2008
• Water wave interaction on a truncated vertical cylinder 2008
• A micromechanics model for the thermal conductivity of nanotube-polymer nanocomposites.  Journal of Applied Mechanics.  75:041025-0410259. 2008
• Characteristic response of a production diesel oxidation catalyst exposed to lean and rich PCI exhaust.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  130:042805. 2008
• Film cooling effectiveness distribution on a gas turbine blade platform with inclined slot leakage and discrete film hole flows.  Journal of Heat Transfer: Transactions of the ASME.  130:071702. 2008
• Flexure pivot tilting pad hybrid gas bearings: Operation with worn clearances and two load-pad configurations.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  130:042506. 2008
• Heat transfer in trailing edge, wedge-shaped cooling channels under high rotation numbers 2008
• MIMO active vibration control of magnetically suspended flywheels for satellite IPAC service.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  130:041005-04100522. 2008
• Method and detailed analysis of individual hydrocarbon species from diesel combustion modes and diesel oxidation catalyst.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  130:042803. 2008
• Squeeze film damper with a mechanical end seal: Experimental force coefficients derived from circular centered orbits 2008
• The impact of real gas properties on predictions of static and rotordynamic properties of the annular gas seals for injection compressors 2008
• A runback criterion for water drops in a turbulent accelerated boundary layer 2008
• Heat Transfer in Trailing Edge, Wedge Shaped Cooling Channels with Slot Ejection under High Rotation Numbers.  Journal of Thermal Science and Engineering Applications.  3:311-320. 2008
• On failure mechanisms in flip chip assembly - Part 1: Short-time scale wave motion.  Journal of Electronic Packaging.  130:021008-02100811. 2008
• On failure mechanisms in flip chip assembly - Part 2: Optimal underfill and interconnecting materials 2008
• A Comparison of Coulomb Friction and Friction Stress Models Based on Multidimensional Nanocontact Experiments.  Journal of Applied Mechanics.  75:034504-0345043. 2008
• A Signal Grammar to Guide Functional Modeling of Electromechanical Products.  Journal of Mechanical Design.  130:051101. 2008
• On the physics of heat transfer and aerodynamic behavior of separated flow along a highly loaded low pressure turbine blade under periodic unsteady wake flow and varying of turbulence intensity.  Journal of Heat Transfer: Transactions of the ASME.  130:051703. 2008
• Effects of manufacturing-induced voids on local failure in polymer-based composites.  Journal of Engineering Materials and Technology.  130:021010-0210109. 2008
• Investigation of Contact Stiffness and Contact Damping for Magnetic Storage Head-Disk Interfaces.  Journal of Tribology.  130:1-9. 2008
• Latent heat fluxes through soft materials with microtruss architectures.  Journal of Heat Transfer: Transactions of the ASME.  130:042403. 2008
• Commutational output feedback control for disk drive ramp loading.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  130:021001-02100110. 2008
• Identification of rotordynamic forces in a flexible rotor system using magnetic bearings.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  130:022504. 2008
• New steps to improve rotordynamic stability predictions of centrifugal compressors.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  130:022505. 2008
• Effect of surface roughness on single cryogen droplet spreading.  Journal of Fluids Engineering.  130:041402. 2008
• Film cooling and heat transfer on two cutback trailing edge models with internal perforated blockages.  Journal of Heat Transfer: Transactions of the ASME.  130:012201. 2008
• Fluid and thermal dynamics of cryogen sprays impinging on a human tissue phantom..  Journal of Biomechanical Engineering.  130:051005. 2008
• A Design to Improve the Effective Damping Characteristics of Hole-Pattern-Stator Annular Gas Seals.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  130:012505. 2008
• Fuel flexibility influences on premixed combustor blowout, flashback autoignition and stability.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  130:011506. 2008
• Heavily loaded gas foil bearings: A model anchored to test data.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  130:012504. 2008
• Incipience of Liquid Entrainment From a Stratified Gas-Liquid Region in Multiple Discharging Branches.  Journal of Fluids Engineering.  130:011301-01130110. 2008
• Surface Effects on the Near-Tip Stresses for Mode-I and Mode-III Cracks.  Journal of Applied Mechanics.  75:011001. 2008
• Frequency Range Selection for Impedance-Based Structural Health Monitoring.  Journal of Vibration and Acoustics: Transactions of the ASME.  129:701-709. 2007
• Heat transfer enhancement for turbulent flow through blockages with round and elongated holes in a rectangular channel.  Journal of Heat Transfer: Transactions of the ASME.  129:1611-1615. 2007
• Multiaxis Maglev Positioner With Nanometer Resolution Over Extended Travel Range 2007
• A virtual tool for prediction of turbocharger nonlinear dynamic response: Validation against test data 2007
• Characteristics of Flow Boiling Oscillations in Silicon Microchannel Heat Sinks.  Journal of Heat Transfer: Transactions of the ASME.  129:1341-1351. 2007
• Discussion: The Lomakin Effect in Annular Gas Seals Under Choked Flow Conditions (Arghir, M., Defaye, C., and Frne, F., 2007, ASME J. Eng. Gas Turbines Power, 129, pp. 10281034) 2007
• Effects of applied potential on friction of a piezoelectric material.  Journal of Tribology.  129:836-840. 2007
• Ignition of lean methane-based fuel blends at gas turbine pressures 2007
• Rotordynamic performance of flexure pivot hydrostatic gas bearings for oil-free turbomachinery.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  129:1020-1027. 2007
• Static friction experiments and verification of an improved elastic-plastic model including roughness effects.  Journal of Tribology.  129:754-760. 2007
• The Hamel Representation: A Diagonalized Poincare Form 2007
• Formation of a group of vehicles with full information using constraint forces.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  129:654-661. 2007
• Interaction of Ships and Ocean Structures With Ice Loads and Stochastic Ocean Waves.  Applied Mechanics Reviews: an assessment of world literature in engineering sciences.  60:246-289. 2007
• Local Heat Transfer Coefficients Induced by Piezoelectrically Actuated Vibrating Cantilevers.  Journal of Heat Transfer: Transactions of the ASME.  129:1168-1176. 2007
• Special issue on analysis and control of multi-agent dynamic systems.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  129:569-570. 2007
• A Flow Boiling Heat Transfer Investigation of FC-72 in a Microtube Using Liquid Crystal Thermography.  Journal of Heat Transfer: Transactions of the ASME.  129:977-987. 2007
• A Generalized Diffusion Layer Model for Condensation of Vapor With Noncondensable Gases.  Journal of Heat Transfer: Transactions of the ASME.  129:988-994. 2007
• Local Heat Transfer Coefficients Under Flows Induced by Vibrating Cantilevers.  Journal of Heat Transfer: Transactions of the ASME.  129:933-933. 2007
• Nonhomogeneous strain from sparse marker arrays for analysis of transmural myocardial mechanics..  Journal of Biomechanical Engineering.  129:603-610. 2007
• Three-dimensional numerical simulations of circular cylinders undergoing two degree-of-freedom vortex-induced vibrations 2007
• Identification of Force Coefficients in a Squeeze Film Damper With a Mechanical End SealCentered Circular Orbit Tests.  Journal of Tribology.  129:660-668. 2007
• Identification of force coefficients in a squeeze film damper with a mechanical end seal - Part 1: Unidirectional load tests.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  129:858-864. 2007
• Modeling of the effect of preferential texturing on the interfacial forces in sub-5 nm ultralow flying head-disk interfaces.  Journal of Tribology.  129:553-561. 2007
• Rotordynamic performance of a rotor supported on bump type foil gas bearings: Experiments and predictions 2007
• Computation of flow and heat transfer in rotating rectangular channels (AR=4 : 1) with pin-fins by a Reynolds stress turbulence model.  Journal of Heat Transfer: Transactions of the ASME.  129:685-696. 2007
• Constitutive material modeling of cell: a micromechanics approach..  Journal of Biomechanical Engineering.  129:315-323. 2007
• Effect of turbulence intensity and periodic unsteady wake flow condition on boundary layer development, separation, and reattachment along the suction surface of a low-pressure turbine blade.  Journal of Fluids Engineering.  129:747-763. 2007
• Influence of groove size on the static and rotordynamic characteristics of short, laminar-flow annular seals 2007
• Nonlinear rotordynamics of automotive turbochargers: Predictions and comparisons to test data.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  129:488-493. 2007
• Rotordynamics of small turbochargers supported on floating ring bearings - Highlights in bearing analysis and experimental validation 2007
• Structural stiffness, dry friction coefficient, and equivalent viscous damping in a bump-type foil gas bearing 2007
• Design and analysis of a disk drive actuator for commutational ramp loading.  Journal of Mechanical Design.  129:346-360. 2007
• Exploring Effective Methods for Simulating Damaged Structures With Geometric Variation: Toward Intelligent Failure Detection.  Journal of Applied Mechanics.  74:191-202. 2007
• State Estimation With Finite Signal-to-Noise Models via Linear Matrix Inequalities 2007
• Dynamic modeling and monitoring of contour crafting - An extrusion-based layered manufacturing process 2007
• Heat (mass) transfer distribution in a two-pass trapezoidal channel with a 180 deg turn.  Journal of Heat Transfer: Transactions of the ASME.  129:1529-1537. 2007
• Mass (heat) transfer downstream of blockages with round and elongated holes in a rectangular channel.  Journal of Heat Transfer: Transactions of the ASME.  129:1676-1685. 2007
• A Study of the Effects of Inlet Preswirl on the Dynamic Coefficients of a Straight-Bore Honeycomb Gas Damper Seal 2007
• A bulk flow model for off-centered honeycomb gas seals 2007
• A bulk-flow model of angled injection Lomakin bearings 2007
• Effect of Reynolds number and periodic unsteady wake flow condition on boundary layer development, separation, and intermittency behavior along the suction surface of a low pressure turbine blade 2007
• Field methods for identification of bearing support parameters - Part I: Identification from transient rotor dynamic response due to impacts 2007
• Field methods for identification of bearing support parameters - Part II: Identification from rotor dynamic response due to imbalances 2007
• Multi-Degree-of-Freedom Precision Position Sensing and Motion Control Using Two-Axis Hall-Effect Sensors 2006
• Suppression of Persistent Rotor Vibrations Using Adaptive Techniques.  Journal of Vibration and Acoustics: Transactions of the ASME.  128:682-689. 2006
• DSMC Simulation of Subsonic Flows in Parallel and Series Microchannels.  Journal of Fluids Engineering.  128:1153-1163. 2006
• Testing State-Space Controls for the Controls Advanced Research Turbine.  Journal of Solar Energy Engineering.  128:506-515. 2006
• Thermal-Fluid MEMS Devices: A Decade of Progress and Challenges Ahead.  Journal of Heat Transfer: Transactions of the ASME.  128:1221-1233. 2006
• A model of stress and strain in the interosseous ligament of the forearm based on fiber network theory..  Journal of Biomechanical Engineering.  128:725-732. 2006
• Adhesive effects on dynamic friction for unlubricated rough planar surfaces.  Journal of Tribology.  128:841-850. 2006
• Design Optimization of Ultra-Low Flying Head-Disk Interfaces Using an Improved Elastic-Plastic Rough Surface Model.  Journal of Tribology.  128:801-810. 2006
• Dynamic characteristics of the diverging taper honeycomb-stator seal.  Journal of Turbomachinery.  128:717-724. 2006
• Effects of stent design parameters on normal artery wall mechanics..  Journal of Biomechanical Engineering.  128:757-765. 2006
• Rotordynamic coefficients measurements versus predictions for a high-speed flexure-pivot tilting-pad bearing (load-between-pad configuration) 2006
• Adaptive controller and observer design for a class of nonlinear systems.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  128:712-717. 2006
• Adaptive estimation of time-varying parameters in linearly parametrized systems.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  128:691-695. 2006
• Film cooling effectiveness on the leading edge region of a rotating turbine blade with two rows of film cooling holes using pressure sensitive paint.  Journal of Heat Transfer: Transactions of the ASME.  128:879-888. 2006
• Networked real-time control strategy dealing with Stochastic time delays and packet losses 2006
• Bump-type foil bearing structural stiffness: Experiments and predictions.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  128:653-660. 2006
• Comparison of rotordynamic analysis predictions with the test response of simple gas hybrid bearings for oil free turbomachinery 2006
• Experimental Investigation on the Onset of Gas Entrainment from a Stratified Two-Phase Region Through Multiple Branches Mounted on a Curved Surface.  Journal of Fluids Engineering.  128:726-733. 2006
• Experimental response of simple gas hybrid bearings for oil-free turbomachinery 2006
• Hybrid Flexure Pivot-Tilting Pad Gas Bearings: Analysis and Experimental Validation.  Journal of Tribology.  128:551-558. 2006
• Limits for high-speed operation of gas foil bearings 2006
• Local Heat Transfer Measurements in Microchannels Using Liquid Crystal Thermography: Methodology Development and Validation.  Journal of Heat Transfer: Transactions of the ASME.  128:617-626. 2006
• Modeling of the Onset of Gas Entrainment From a Stratified Two-Phase Region Through Branches on a Curved Surface.  Journal of Fluids Engineering.  128:717-725. 2006
• The Influence of In Situ Reheat on Turbine-Combustor Performance 2006
• Investigation of microbubble boundary layer using particle tracking velocimetry 2006
• Pool boiling experiments on multiwalled carbon nanotube (MWCNT) forests.  Journal of Heat Transfer: Transactions of the ASME.  128:1335-1342. 2006
• Stresses in Proton Exchange Membranes Due to Hygro-Thermal Loading.  Journal of Fuel Cell Science and Technology.  3:119-124. 2006
• Study of cubic splines and Fourier series as interpolation techniques for filling in short periods of missing building energy use and weather data.  Journal of Solar Energy Engineering.  128:226-230. 2006
• The Investigation of Gravity-Driven Metal Powder Flow in Coaxial Nozzle for Laser-Aided Direct Metal Deposition Process 2006
• Tube bending under axial force and internal pressure 2006
• Frequency dependency of measured and predicted rotordynamic coefficients for a load-on-pad flexible-pivot tilting-pad bearing 2006
• Rotordynamic-coefficients and static (equilibrium loci and leakage) characteristics laminar-flow for annular seals.  Journal of Tribology.  128:378-387. 2006
• Thermal Contact Resistance and Thermal Conductivity of a Carbon Nanofiber 2006
• A theoretical model of enlarging intracranial fusiform aneurysms..  Journal of Biomechanical Engineering.  128:142-149. 2006
• Dynamic Modeling of Powder Delivery Systems in Gravity-Fed Powder Feeders 2006
• Optimized upper bound analysis of axisymmetric extrusion using spherical velocity field 2006
• Optimal parameter selection for electronic packaging using sequential computer simulations 2006
• A Homogenization Scheme for Nonlinear Viscoelastic Behaviors of Particulate Reinforced Composites.  ASME Applied Mechanics Division -Publications- Amd.  513-521. 2006
• The Development of a Dual-Injection Hydrogen-Fueled Engine With High Power and High Efficiency 2006
• Modeling and Multivariable Control Design Methodologies for Hexapod-Based Satellite Vibration Isolation 2005
• Supporting negotiations in the early stage of large-scale mechanical system design.  Journal of Mechanical Design.  127:1056-1067. 2005
• Rotordynamic coefficients for a tooth-on-stator labyrinth seal at 70 bar supply pressures: Measurements versus theory and comparisons to a hole-pattern stator seal 2005
• Toward Intelligent Fault Detection in Turbine Blades: Variational Vibration Models of Damaged Pinned-Pinned Beams.  Journal of Vibration and Acoustics: Transactions of the ASME.  127:467-474. 2005
• Fine-Scale Simulation of Sandstone Acidizing 2005
• Nanoscale motion control with a compact minimum-actuator magnetic levitator.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  127:433-442. 2005
• Numerical simulation of mixed convective flow over a three-dimensional horizontal backward facing step.  Journal of Heat Transfer: Transactions of the ASME.  127:1027-1036. 2005
• Special Issue 2005
• Heat-induced changes in the finite strain viscoelastic behavioir of a collaagenous tissue..  Journal of Biomechanical Engineering.  127:580-586. 2005
• A Methodology for Model Selection in Engineering Design.  Journal of Mechanical Design.  127:378-387. 2005
• Film-cooling effectiveness on a gas turbine blade tip using pressure-sensitive paint.  Journal of Heat Transfer: Transactions of the ASME.  127:521-530. 2005
• On the physics of flow separation along a low pressure turbine blade under unsteady flow conditions 2005
• Influence of entrance geometry on heat transfer in rotating rectangular cooling channels (AR=4 : 1) with angled ribs 2005
• Test response and nonlinear analysis of a turbocharger supported on floating ring bearings.  Journal of Vibration and Acoustics: Transactions of the ASME.  127:107-115. 2005
• A decentralized output feedback controller for a class of large-scale interconnected nonlinear systems.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  127:167-172. 2005
• Buckling of a thin circular plate loaded by in-plane gravity.  Journal of Applied Mechanics.  72:296-298. 2005
• Heat Transfer in Two-Pass Rotating Rectangular Channels (AR=1:2 and AR=1:4) With Smooth Walls.  Journal of Heat Transfer: Transactions of the ASME.  127:265-277. 2005
• Measurement and modeling of normal contact stiffness and contact damping at the meso scale.  Journal of Vibration and Acoustics: Transactions of the ASME.  127:52-60. 2005
• A gas-surface interaction model for spatial and time-dependent friction coefficient in reciprocating contacts: Applications to near-frictionless carbon.  Journal of Tribology.  127:82-88. 2005
• Calculating the eigenfrequency of rotating acoustic annulus inside labyrinth seals of turbomachines.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  127:178-181. 2005
• Heat Transfer in Water-Cooled Silicon Carbide Milli-Channel Heat Sinks for High Power Electronic Applications.  Journal of Heat Transfer: Transactions of the ASME.  127:59-65. 2005
• Modeling of anisotropic deformation in superplastic sheet metal stretching.  Journal of Engineering Materials and Technology.  127:159-164. 2005
• A multiaxial computer-controlled organ culture and biomechanical device for mouse carotid arteries..  Journal of Biomechanical Engineering.  126:787-795. 2004
• Comparison of analytical and centrifuge model tests for suction caissons subjected to combined loads.  Journal of Offshore Mechanics and Arctic Engineering: Transactions of the ASME.  126:364-367. 2004
• Design of Controls to Attenuate Loads in the Controls Advanced Research Turbine.  Journal of Solar Energy Engineering.  126:1083-1091. 2004
• Methods for Increasing Region 2 Power Capture on a Variable-Speed Wind Turbine.  Journal of Solar Energy Engineering.  126:1092-1100. 2004
• Experimental study of the effect of periodic unsteady wake flow on boundary layer development, separation, and reattachment along the surface of a low pressure turbine blade.  Journal of Turbomachinery.  126:663-676. 2004
• Extracting summit roughness parameters from random Gaussian surfaces accounting for asymmetry of the summit heights.  Journal of Tribology.  126:761-766. 2004
• On the characteristics of bifurcation and nonlinear dynamic response.  Journal of Vibration and Acoustics: Transactions of the ASME.  126:574-579. 2004
• Thermal performance of angled, V-shaped, and W-shaped rib turbulators in rotating rectangular cooling channels (AR=4 : 1).  Journal of Turbomachinery.  126:604-614. 2004
• A study on control of accumulators in web processing lines.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  126:453-461. 2004
• Adaptive control of mechanical systems with time-varying parameters and disturbances.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  126:520-530. 2004
• Modeling Springback of Metal-Polymer-Metal Laminates 2004
• Fractional coverage model for the adsorption and removal of gas species and application to superlow friction diamond-like carbon.  Journal of Tribology.  126:615-619. 2004
• Nanomechanical properties of aluminum 390-T6 rough surfaces undergoing tribological testing.  Journal of Tribology.  126:573-582. 2004
• Static friction model for rough surfaces with asymmetric distribution of asperity heights.  Journal of Tribology.  126:626-629. 2004
• Practical Airgap Prediction for Offshore Structures.  Journal of Offshore Mechanics and Arctic Engineering: Transactions of the ASME.  126:147-155. 2004
• Adhesion forces for sub-10 nm flying-height magnetic storage Head Disk Interfaces.  Journal of Tribology.  126:334-341. 2004
• Combining and contacting of two rough surfaces with asymmetric distribution of asperity heights.  Journal of Tribology.  126:225-232. 2004
• Dynamic response of squeeze film dampers operating with bubbly mixtures.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  126:408-415. 2004
• Forced response of a squeeze film damper and identification of force coefficients from large orbital motions.  Journal of Tribology.  126:292-300. 2004
• Rotordynamic-Coefficient and Leakage Characteristics for Hole-Pattern-Stator Annular Gas SealsMeasurements Versus Predictions.  Journal of Tribology.  126:326-333. 2004
• Modeling the pneumatic subsystem of an S-cam air brake system.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  126:36-46. 2004
• Transit Draft Heave and Pitch Motion Analysis of the Mobile Offshore Base (MOB) Using Reverse MI/SO Techniques.  Journal of Offshore Mechanics and Arctic Engineering: Transactions of the ASME.  126:16-25. 2004
• Control-oriented modeling of transcritical vapor compression systems.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  126:54-64. 2004
• Cooperative Control of Vehicle Swarms for Acoustic Target Localization by Energy Flows.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  126:891-895. 2004
• Evaluation of a statistical method for assessing infill production potential in mature, low-permeability gas reservoirs 2004
• Experimental characterization of nonlinear dynamics underlying the cylindrical grinding process 2004
• Simplified building and air-handling unit model calibration and applications.  Journal of Solar Energy Engineering.  126:601-609. 2004
• Singularity issues in fixture fault diagnosis for multi-station assembly processes 2004
• The selective non-catalytic removal (SNCR) of nitric oxides from engine exhaust streams: Comparison of three processes.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  126:234-240. 2004
• Design of State-Space-Based Control Algorithms for Wind Turbine Speed Regulation.  Journal of Solar Energy Engineering.  125:386-395. 2003
• Dynamic characteristics of elastic bonding in composite laminates: A free vibration study.  Journal of Applied Mechanics.  70:860-870. 2003
• On the characteristics and mechanism of rolling instability and chatter 2003
• Periodic Disturbance Accommodating Control for Blade Load Mitigation in Wind Turbines.  Journal of Solar Energy Engineering.  125:379-385. 2003
• A dynamic friction model for unlubricated rough planar surfaces.  Journal of Tribology.  125:788-796. 2003
• Imbalance response of a rotor supported on flexure pivot tilting pad journal bearings in series with integral squeeze film dampers.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  125:1026-1032. 2003
• Measuring Thermal and Thermoelectric Properties of One-Dimensional Nanostructures Using a Microfabricated Device 2003
• Modeling of the Onset of Gas Entrainment Through a Finite-Side Branch.  Journal of Fluids Engineering.  125:902-909. 2003
• Periodic tension disturbance attenuation in web process lines using active dancers.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  125:361-371. 2003
• Heat transfer between blockages with holes in a rectangular channel.  Journal of Heat Transfer: Transactions of the ASME.  125:587-594. 2003
• Heat transfer coefficients on the squealer tip and near squealer tip regions of a gas turbine blade 2003
• Heat transfer coefficients and film-cooling effectiveness on a gas turbine blade tip 2003
• Flow visualization and forces from a squeeze film damper operating with natural air entrainment.  Journal of Tribology.  125:325-333. 2003
• Heat transfer in two-pass rotating rectangular channels (AR=2) with five different orientations of 45 deg V-shaped rib turbulators 2003
• Performance of damaged hydrostatic bearings: Predictions versus experiments 2003
• Research Workshop Tribology Issues in Biology and Medicine.  Journal of Tribology.  125:217-222. 2003
• Theory versus experiment for the rotordynamic characteristics of a high pressure honeycomb annular gas seal at eccentric positions 2003
• Effect of unsteady wake passing frequency on boundary layer transition, experimental investigation, and wavelet analysis.  Journal of Fluids Engineering.  125:251-266. 2003
• Green's functions for infinite and semi-infinite anisotropic thin plates.  Journal of Applied Mechanics.  70:260-267. 2003
• Review of the uses and modeling of bitumen from ancient to modern times.  Applied Mechanics Reviews: an assessment of world literature in engineering sciences.  56:149-214. 2003
• Single plane radial, magnetic bearings biased with poles containing permanent magnets.  Journal of Mechanical Design.  125:178-185. 2003
• A numerical study of flow and heat transfer in rotating rectangular channels (AR=4) with 45 deg rib turbulators by Reynolds stress turbulence model.  Journal of Heat Transfer: Transactions of the ASME.  125:19-26. 2003
• Experimental investigation of heat exchanger tubesheet hole enlargement.  Journal of Pressure Vessel Technology: Transactions of the ASME.  125:19-25. 2003
• Experimentally tractable, pseudo-elastic constitutive law for biomembranes: I. Theory..  Journal of Biomechanical Engineering.  125:94-99. 2003
• Experimentally tractable, pseudo-elastic constitutive law for biomembranes: II. Application..  Journal of Biomechanical Engineering.  125:100-105. 2003
• Calibration procedure for energy performance simulation of a commercial building.  Journal of Solar Energy Engineering.  125:251-257. 2003
• Continuous Commissioning(SM) of building energy systems.  Journal of Solar Energy Engineering.  125:275-281. 2003
• Adhesion and pull-off forces for polysilicon MEMS surfaces using the sub-boundary lubrication model.  Journal of Tribology.  125:193-199. 2003
• Twice-running-speed response due to elliptical bearing clearances.  Journal of Vibration and Acoustics: Transactions of the ASME.  125:64-67. 2003
• Accuracy of elastic property measurement in mandibular cortical bone is improved by using cylindrical specimens..  Journal of Biomechanical Engineering.  124:714-723. 2002
• Floquet Modal Analysis of a Teetered-Rotor Wind Turbine.  Journal of Solar Energy Engineering.  124:364-371. 2002
• Measurements versus predictions for the dynamic impedance of annular gas seals - Part I: Test facility and apparatus 2002
• Measurements versus predictions for the dynamic impedance of annular gas seals - Part II: Smooth and honeycomb geometries 2002
• A Note About the Stability of a String of LTI Systems.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  124:472-475. 2002
• Design evaluation of multi-station assembly processes by using state space approach.  Journal of Mechanical Design.  124:408-418. 2002
• Heat transfer in rotating rectangular cooling channels (AR=4) with angled ribs.  Journal of Heat Transfer: Transactions of the ASME.  124:617-625. 2002
• Laser-optic evaluation for bond quality of polymeric medical tubing.  Journal of Pressure Vessel Technology: Transactions of the ASME.  124:283-292. 2002
• A comparison of rotordynamic-coefficient predictions for annular honeycomb gas seals using three different friction-factor models.  Journal of Tribology.  124:524-529. 2002
• Interpretations of indentation size effects 2002
• Test and theory correlation study for a flexible rotor on fault-tolerant magnetic bearings.  Journal of Vibration and Acoustics: Transactions of the ASME.  124:359-366. 2002
• A Quantitative Similarity Metric for Design-by-Analogy.  Journal of Mechanical Design.  124:173-182. 2002
• Effect of Squealer Geometry Arrangement on a Gas Turbine Blade Tip Heat Transfer 2002
• Fault diagnosis of multistage manufacturing processes by using state space approach 2002
• Contact of rough surfaces with asymmetric distribution of asperity heights.  Journal of Tribology.  124:367-376. 2002
• Measurements of rotordynamic coefficients of hybrid bearings with (a) a plugged orifice, (b) a worn land surface.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  124:363-368. 2002
• Pressure measurements and flow visualization in a squeeze film damper operating with a bubbly mixture 2002
• Diagnosability analysis of multi-station manufacturing processes.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  124:1-13. 2002
• Linear Elastic Waves.  Applied Mechanics Reviews: an assessment of world literature in engineering sciences.  55:b26-b26. 2002
• A left ventricle model to predict post-revascularization ejection fraction based on cine magnetic resonance images..  Journal of Biomechanical Engineering.  124:52-55. 2002
• MOB Platform Nonlinear Dynamics in a Realistic (Random) Seaway 2002
• Characterization and detection of crack-induced rotary instability.  Journal of Vibration and Acoustics: Transactions of the ASME.  124:40-48. 2002
• Effects of misalignment on turbulent flow hybrid thrust bearings 2002
• Full-State Feedback Control of a Variable-Speed Wind Turbine: A Comparison of Periodic and Constant Gains.  Journal of Solar Energy Engineering.  123:319-326. 2001
• Air entrainment versus lubricant vaporization in squeeze film dampers: An experimental assessment of their fundamental differences.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  123:871-877. 2001
• Air Gap Response of Floating Structures: Statistical Predictions Versus Observed Behavior 2001
• Analytical Predictions of the Air Gap Response of Floating Structures.  Journal of Offshore Mechanics and Arctic Engineering: Transactions of the ASME.  123:112-117. 2001
• Detailed heat transfer coefficient distributions on a large-scale gas turbine blade tip 2001
• Fully nonlinear multidirectional waves by a 3-D viscous numerical wave tank.  Journal of Offshore Mechanics and Arctic Engineering: Transactions of the ASME.  123:124-133. 2001
• A note on Kellenberger's model for spiral vibrations.  Journal of Vibration and Acoustics: Transactions of the ASME.  123:405-408. 2001
• Simulation and analysis of a magnetoelastically driven micro-pump.  Journal of Fluids Engineering.  123:435-438. 2001
• The fault-tolerant control of magnetic bearings with reduced controller outputs 2001
• A neuro-fuzzy system for tool condition monitoring in metal cutting 2001
• Thermal effects on polymer laminated steel formability in ironing 2001
• Experimental and theoretical comparison of two swirl brake designs 2001
• Study of Subcooled Film Boiling on a Horizontal Disc: Part IAnalysis.  Journal of Heat Transfer: Transactions of the ASME.  123:271-284. 2001
• Study of Subcooled Film Boiling on a Horizontal Disc:1 Part 2Experiments.  Journal of Heat Transfer: Transactions of the ASME.  123:285-293. 2001
• Robotic surface finishing processes: Modeling, control, and experiments.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  123:93-102. 2001
• Three-dimensional solutions of smart functionally graded plates.  Journal of Applied Mechanics.  68:234-241. 2001
• A model for squeeze film dampers operating with air entrainment and validation with experiments 2001
• Deformation Twinning During Impact of a Titanium Cylinder: Numerical Investigation.  ASME Applied Mechanics Division -Publications- Amd.  244:31-36. 2000
• Markov Data-Based LQG Control 2000
• An Analytical Model to Predict Condensation of R-410A in a Horizontal Rectangular Channel.  Journal of Heat Transfer: Transactions of the ASME.  122:613-620. 2000
• Optimized realization of fault-tolerant heteropolar magnetic bearings 2000
• The Effects of Converging and Diverging Axial Taper on the Rotordynamic Coefficients of Liquid Annular Pressure Seals: Theory Versus Experiment 2000
• Fractal estimation of flank wear in turning.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  122:89-94. 2000
• An algorithm for a near optimal NC path generation in staircase (lase) traversal of convex polygonal surfaces 2000
• Heat (mass) transfer in a diagonally oriented rotating two-pass channel with rib-roughened walls.  Journal of Heat Transfer: Transactions of the ASME.  122:208-211. 2000
• An investigation of yield potentials in superplastic deformation.  Journal of Engineering Materials and Technology.  122:93-97. 2000
• Influence of heat treatment on the mechanical properties and damage development in a SiC/Ti-15-3 MMC.  Journal of Engineering Materials and Technology.  122:74-79. 2000
• Relationship Between Vibration Frequencies of Reddy and Kirchhoff Polygonal Plates With Simply Supported Edges 2000
• An approach to characterize nonlinear viscoelastic material behavior using dynamic mechanical tests and analyses.  Journal of Applied Mechanics.  66:872-878. 1999
• Adiabatic Processes and Constraints in Thermoelasticity.  ASME Applied Mechanics Division -Publications- Amd.  236:87-95. 1999
• Intelligent Cruise Control Systems and Traffic Flow Behavior 1999
• Effect of frequency excitation on force coefficients of spiral groove gas seals.  Journal of Tribology.  121:853-861. 1999
• Imbalance response of a rotor supported on open-ends integral squeeze film dampers.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  121:718-724. 1999
• Reduction of the dynamic load capacity in a squeeze film damper operating with a bubbly lubricant.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  121:703-709. 1999
• Rotordynamic evaluation of a near-tangential-injection hybrid bearing.  Journal of Tribology.  121:886-891. 1999
• Constant spacing strategies for platooning in Automated Highway Systems.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  121:462-470. 1999
• Coupled Dynamic Analysis of a Moored Spar in Random Waves and Currents (Time-Domain Versus Frequency-Domain Analysis).  Journal of Offshore Mechanics and Arctic Engineering: Transactions of the ASME.  121:194-200. 1999
• Effect of unsteady wake with trailing edge coolant ejection on film cooling performance for a gas turbine blade.  Journal of Turbomachinery.  121:448-455. 1999
• Optimum forming loading paths for Pb-Sn superplastic sheet materials.  Journal of Engineering Materials and Technology.  121:341-345. 1999
• A bulk-flow analysis of multiple-pocket gas damper seals.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  121:355-363. 1999
• Analytical approximations in modeling contacting rough surfaces.  Journal of Tribology.  121:234-239. 1999
• CFD comparison to 3D laser anemometer and rotordynamic force measurements for grooved liquid annular seals.  Journal of Tribology.  121:306-314. 1999
• Coalescence-controlled anisotropic ductile fracture.  Journal of Engineering Materials and Technology.  121:221-229. 1999
• Comparison of predictions with test results for rotordynamic coefficients of a four-pocket gas damper seal.  Journal of Tribology.  121:363-369. 1999
• Experimental force coefficients for a two-bladed labyrinth seal and a four-pocket damper seal.  Journal of Tribology.  121:370-376. 1999
• A Fourier series model to predict hourly heating and cooling energy use in commercial buildings with outdoor temperature as the only weather variable.  Journal of Solar Energy Engineering.  121:47-53. 1999
• The effect of periodic unsteady flow on aerodynamics and heat transfer on a curved surface.  Journal of Heat Transfer: Transactions of the ASME.  121:22-33. 1999
• A computational model for predicting damage evolution in laminated composite plates.  Journal of Engineering Materials and Technology.  121:436-444. 1999
• An analysis of intersonic crack growth under shear loading.  Journal of Applied Mechanics.  66:847-857. 1999
• An experimental investigation of the survivability and friction characteristics of tin-coated and polymer-laminated steels 1999
• Analysis of acoustic emission signals in machining 1999
• Coupling between heat and momentum transfer mechanisms for drag-reducing polymer and surfactant solutions.  Journal of Heat Transfer: Transactions of the ASME.  121:796-802. 1999
• Development of an inverse method to estimate overall building and ventilation parameters of large commercial buildings.  Journal of Solar Energy Engineering.  121:40-46. 1999
• Elastodynamic Response of a Chain of Particles.  ASME Applied Mechanics Division -Publications- Amd.  234:47-54. 1999
• Evaluation of Some Commercial VR Environments: Trends and Directions 1999
• Functional Specifications for Tele-Immersive Product Evaluation 1999
• Generalization of the Fourier series approach to model hourly energy use in commercial buildings.  Journal of Solar Energy Engineering.  121:54-62. 1999
• Material characterization of SMA actuators under nonproportional thermomechanical loading.  Journal of Engineering Materials and Technology.  121:75-85. 1999
• Specific Grinding Energy Causing Thermal Damage in Precision Gear Steels 1999
• The maximum potential energy savings from optimizing cold deck and hot deck reset schedules for dual duct VAV systems.  Journal of Solar Energy Engineering.  121:171-175. 1999
• Experimental rotordynamic coefficient results for (a) a labyrinth seal with and without shunt injection and (b) a honeycomb seal.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  121:153-159. 1999
• Modeling unsteady boundary layer transition on a curved plate under periodic unsteady flow conditions: Aerodynamic and heat transfer investigations.  Journal of Turbomachinery.  121:88-97. 1999
• Rotordynamic evaluation of a roughened-land hybrid bearing.  Journal of Tribology.  121:133-138. 1999
• Test results for liquid "damper" seals using a round-hole roughness pattern for the stators.  Journal of Tribology.  121:42-49. 1999
• Modeling and Robust Control of Vibrations in a Flexible Four-Bar Mechanism.  ASME -Publications- Bed.  97:75-83. 1998
• A comparison of experimental rotordynamic coefficients and leakage characteristics between hole-pattern gas damper seals and a honeycomb seal.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  120:778-783. 1998
• Detailed film cooling measurements on a cylindrical leading edge model: Effect of free-stream turbulence and coolant density.  Journal of Turbomachinery.  120:799-807. 1998
• Effect of unsteady wake on detailed heat transfer coefficient and film effectiveness distributions for a gas turbine blade.  Journal of Turbomachinery.  120:808-817. 1998
• Theory Versus Experiment for the Effects of Pressure Ratio on the Performance of an Orifice-Compensated Hybrid Bearing.  Journal of Vibration and Acoustics: Transactions of the ASME.  120:930-936. 1998
• Development of graphical indices for viewing building energy data: Part I.  Journal of Solar Energy Engineering.  120:156-161. 1998
• Development of graphical indices for viewing building energy data: Part II.  Journal of Solar Energy Engineering.  120:162-167. 1998
• Procedures for calibrating hourly simulation models to measured building energy and environmental data.  Journal of Solar Energy Engineering.  120:193-204. 1998
• Special Issue on Conservation and Solar Buildings.  Journal of Solar Energy Engineering.  120:149-149. 1998
• The Effect of Charge Shape on Partially Confined Detonations.  Journal of Pressure Vessel Technology: Transactions of the ASME.  120:313-318. 1998
• The Response of a Partially Confined Detonation Facility to Blast Loading.  Journal of Pressure Vessel Technology: Transactions of the ASME.  120:306-312. 1998
• Analysis of two-phase flow in cryogenic damper seals - Part I: Theoretical model.  Journal of Tribology.  120:221-227. 1998
• Analysis of two-phase flow in cryogenic damper seals - Part II: Model validation and predictions.  Journal of Tribology.  120:228-233. 1998
• Finite element analysis of herringbone groove journal bearings: A parametric study.  Journal of Tribology.  120:234-240. 1998
• Imbalance Response of a Test Rotor Supported on Squeeze Film Dampers.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  120:397-404. 1998
• Static friction of contacting real surfaces in the presence of sub-boundary lubrication.  Journal of Tribology.  120:296-303. 1998
• Cross-sectional deformation of the aorta as measured with magnetic resonance imaging..  Journal of Biomechanical Engineering.  120:18-21. 1998
• A perspective on methods for analysis of measured energy data from commercial buildings.  Journal of Solar Energy Engineering.  120:150-155. 1998
• Ambient-temperature regression analysis for estimating retrofit savings in commercial buildings.  Journal of Solar Energy Engineering.  120:168-176. 1998
• Effect of channel orientation of local heat (mass) transfer distributions in a rotating two-pass square channel with smooth walls.  Journal of Heat Transfer: Transactions of the ASME.  120:624-632. 1998
• Effects of thermomechanical coupling and relaxation times on wave spectrum in dynamic theory of generalized thermoelasticity.  Journal of Applied Mechanics.  65:605-613. 1998
• Modeling hourly energy use in commercial buildings with Fourier series functional forms.  Journal of Solar Energy Engineering.  120:217-223. 1998
• Multivariate regression modeling.  Journal of Solar Energy Engineering.  120:177-184. 1998
• On the Role of Damage Mechanics in Life Prediction of Composite Structures.  ASME -Publications- Ad.  56:149-149. 1998
• Use of calibrated HVAC system models to optimize system operation.  Journal of Solar Energy Engineering.  120:131-138. 1998
• Rotation Effect on Jet Impingement Heat Transfer in Smooth Rectangular Channels With Four Heated Walls and Radially Outward Crossflow.  Journal of Turbomachinery.  120:79-85. 1998
• Contact transition control of nonlinear mechanical systems subject to a unilateral constraint.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  119:749-759. 1997
• Adaptive Feedback Linearization for the Control of a Typical Wing Section With Structural Nonlinearity.  ASME -Publications- Ad.  53:139-148. 1997
• The acoustic influence of cell depth on the rotordynamic characteristics of smooth-rotor/honeycomb-stator annular gas seals.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  119:949-956. 1997
• Closure to Discussion of Eccentricity Effects on the Rotordynamic Coefficients of Plain Annular Seals: Theory Versus Experiment (1997, ASME J. Tribol., 119, pp. 447448).  Journal of Tribology.  119:448-448. 1997
• Combined effect of grid turbulence and unsteady wake on film effectiveness and heat transfer coefficient of a gas turbine blade with air and CO2 film injection.  Journal of Turbomachinery.  119:594-600. 1997
• Eccentricity effects on the rotordynamic coefficients of plain annular seals: Theory versus experiment.  Journal of Tribology.  119:443-447. 1997
• Film effectiveness over a flat surface with air and CO2 injection through compound angle holes using a transient liquid crystal image method.  Journal of Turbomachinery.  119:587-593. 1997
• Effect of unsteady wake with trailing edge coolant ejection on detailed heat transfer coefficient distributions for a gas turbine blade.  Journal of Heat Transfer: Transactions of the ASME.  119:242-248. 1997
• Closure to Discussion of Measurements of Static Loading Versus Eccentricity in a Flexure-Pivot Tilting Pad Journal Bearing (1997, ASME J. Tribol., 119, p. 304).  Journal of Tribology.  119:304-305. 1997
• Forces and moments due to misalignment vibrations in annular liquid seals using the averaged Navier-Stokes equations - Discussion.  Journal of Tribology.  119:287-288. 1997
• Measurements of static loading versus eccentricity in a flexure-pivot tilting pad journal bearing.  Journal of Tribology.  119:297-304. 1997
• Modeling and simulation methods for MDOF structures and rotating machinery with impact dampers.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  119:436-446. 1997
• Electromechanical modeling of hybrid piezohydraulic actuator system for active vibration control.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  119:10-18. 1997
• A Damage Mechanics Based Approach to Durability Assessment of Composite Materials.  American Society of Mechanical Engineers, Materials Division (Publication) MD.  80:151-156. 1997
• Damage in Ceramic Matrix Composites With Arbitrary Microstructures.  American Society of Mechanical Engineers, Materials Division (Publication) MD.  80:441-446. 1997
• Elastothermodynamic damping in particulate composites: Hollow spherical inclusions.  Journal of Applied Mechanics.  64:111-115. 1997
• Influence of process parameters on the ironing of deep-drawn cups 1997
• Prediction of viscous ship roll damping by unsteady Navier-Stokes techniques.  Journal of Offshore Mechanics and Arctic Engineering: Transactions of the ASME.  119:108-113. 1997
• Stiffness Changes in Laminates Caused by Intralaminar Cracks and Shear Deformation.  American Society of Mechanical Engineers, Materials Division (Publication) MD.  80:165-168. 1997
• Angled InjectionHydrostatic Bearings Analysis and Comparison to Test Results.  Journal of Tribology.  119:179-187. 1997
• Discussion: A Global Approach of Thermal Effects Including Pad Deformations in Tilting-Pad Journal Bearings Submitted to Unbalance Load (Fillon, M., Desbordes, H., Frne, J., and Chan Hew Wai, C., 1996, ASME J. Tribol., 118, pp. 169174).  Journal of Tribology.  119:227-227. 1997
• Experimental and theoretical rotordynamic characteristics of a hybrid journal bearing - Discussion.  Journal of Tribology.  119:141-142. 1997
• Adaptive Tool Replacement Policies in Machining Economics 1996
• On flow separation with adverse rotational buoyancy.  Journal of Heat Transfer: Transactions of the ASME.  118:977-979. 1996
• Second-order vertical diffraction forces on truncated cylinders.  Journal of Offshore Mechanics and Arctic Engineering: Transactions of the ASME.  118:259-266. 1996
• Experimental study on the effect of a circumferential feeding groove on the dynamic force response of a sealed squeeze film damper.  Journal of Tribology.  118:900-905. 1996
• Optimal Redesign of Linear Systems.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  118:598-605. 1996
• Anomalous Diffusion in Short-Pulse Laser Interactions With Random Media.  Journal of Heat Transfer: Transactions of the ASME.  118:781-786. 1996
• Local heat transfer in rotating smooth and ribbed two-pass square channels with three channel orientations.  Journal of Heat Transfer: Transactions of the ASME.  118:578-584. 1996
• Development of Two-Dimensional Wakes Within Curved Channels: Theoretical Framework and Experimental Investigation.  Journal of Turbomachinery.  118:506-518. 1996
• Local heat transfer in a rotating two-pass triangular duct with smooth walls.  Journal of Turbomachinery.  118:435-443. 1996
• Development of a two-dimensional turbulent wake in a curved channel with a positive streamwise pressure gradient.  Journal of Fluids Engineering.  118:292-299. 1996
• Stress distributions during fiber pull-out.  Journal of Applied Mechanics.  63:301-306. 1996
• A single integral finite strain viscoelastic model of ligaments and tendons..  Journal of Biomechanical Engineering.  118:221-226. 1996
• Effect of film hole row location on film effectiveness on a gas turbine blade.  Journal of Heat Transfer: Transactions of the ASME.  118:327-333. 1996
• An extended three-control-volume theory for circumferentially-grooved liquid seals.  Journal of Tribology.  118:276-285. 1996
• Experimental leakage and rotordynamic results for helically grooved annular gas seals.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  118:389-393. 1996
• Transient analysis of plain and tilt pad journal bearings including fluid film temperature effects.  Journal of Tribology.  118:423-430. 1996
• Heat (mass) transfer in a serpentine channel with right-angled turns.  Journal of Heat Transfer: Transactions of the ASME.  118:211-213. 1996
• Mixed convective heat transfer between a series of vertical parallel plates with planar heat sources.  Journal of Heat Transfer: Transactions of the ASME.  118:984-990. 1996
• The measured energy impact of infiltration in an outdoor test cell.  Journal of Solar Energy Engineering.  118:162-167. 1996
• A two-component mixed friction model for a lubricated line contact.  Journal of Tribology.  118:183-189. 1996
• Turbulent Flow, Flexure-Pivot Hybrid Bearings for Cryogenic Applications.  Journal of Tribology.  118:190-200. 1996
• Assessment of a Reynolds stress closure model for appendage hull junction flows.  Journal of Fluids Engineering.  117:557-563. 1995
• Theoretical and experimental study of development of two-dimensional steady and unsteady wakes within curved channels.  Journal of Fluids Engineering.  117:593-598. 1995
• Experimental heat transfer in a rotating triangular duct: Effect of model orientation.  Journal of Heat Transfer: Transactions of the ASME.  117:1058-1061. 1995
• Active vibration control of rotating machinery with a hybrid piezohydraulic actuator system.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  117:767-776. 1995
• Boundary and mixed friction in the presence of dynamic normal loads .2. Friction transients - Authors' closure.  Journal of Tribology.  117:748-748. 1995
• Erratum: Boundary and Mixed Friction in the Presence of Dynamic Normal Loads: Part IIFriction Transients [1995, ASME Journal of Tribology, 117(2), pp. 261266].  Journal of Tribology.  117:574-574. 1995
• Erratum: Boundary and Mixed Friction in the Presence of Dynamic Normal Loads: Part ISystem Model [1995, ASME Journal of Tribology, 117(2), pp. 255260].  Journal of Tribology.  117:574-574. 1995
• Thermohydrodynamic analysis of process-liquid hydrostatic journal bearings in turbulent regime .1. The model and perturbation analysis.  Journal of Applied Mechanics.  62:674-678. 1995
• Thermohydrodynamic analysis of process-liquid hydrostatic journal bearings in turbulent regime .2. Numerical solution and results.  Journal of Applied Mechanics.  62:679-684. 1995
• BUILDING ENERGY USE PREDICTION AND SYSTEM-IDENTIFICATION USING RECURRENT NEURAL NETWORKS.  Journal of Solar Energy Engineering.  117:161-166. 1995
• THE ENERGY IMPACT OF AIR LEAKAGE THROUGH INSULATED WALLS.  Journal of Solar Energy Engineering.  117:167-172. 1995
• A FORCED RESPONSE ANALYSIS AND APPLICATION OF IMPACT DAMPERS TO ROTORDYNAMIC VIBRATION SUPPRESSION IN A CRYOGENIC ENVIRONMENT.  Journal of Vibration and Acoustics: Transactions of the ASME.  117:300-310. 1995
• COMBINED PIEZOELECTRIC-HYDRAULIC ACTUATOR BASED ACTIVE VIBRATION CONTROL FOR ROTORDYNAMIC SYSTEM.  Journal of Vibration and Acoustics: Transactions of the ASME.  117:285-293. 1995
• Combined Piezoelectric-Hydraulic Actuator Based Active Vibration Control for Rotordynamic System.  Journal of Vibration and Acoustics: Transactions of the ASME.  117:285-293. 1995
• INERTIA EFFECTS IN A HYBRID BEARING WITH A 45-DEGREE ENTRANCE REGION.  Journal of Tribology.  117:498-505. 1995
• MEASURED TRANSITIONS BETWEEN STICKING AND SLIPPING AT LUBRICATED LINE CONTACTS.  Journal of Vibration and Acoustics: Transactions of the ASME.  117:294-299. 1995
• Measured Transitions Between Sticking and Slipping at Lubricated Line Contacts.  Journal of Vibration and Acoustics: Transactions of the ASME.  117:294-299. 1995
• EDDY-CURRENT EFFECTS ON THE DESIGN OF ROTOR-MAGNETIC BEARING SYSTEMS.  Journal of Mechanical Design.  117:162-170. 1995
• Eddy Current Effects on the Design of Rotor-Magnetic Bearing Systems.  Journal of Mechanical Design.  117:162-170. 1995
• A PROCEDURE FOR PLOTTING THE SUN-PATH DIAGRAM, AND SHADING MASK PROTECTOR.  Journal of Solar Energy Engineering.  117:153-156. 1995
• COMBINED EFFECT OF FREE-STREAM TURBULENCE AND UNSTEADY WAKE ON HEAT-TRANSFER COEFFICIENTS FROM A GAS-TURBINE BLADE.  Journal of Heat Transfer: Transactions of the ASME.  117:296-302. 1995
• BOUNDARY AND MIXED FRICTION IN THE PRESENCE OF DYNAMIC NORMAL LOADS .1. SYSTEM MODEL.  Journal of Tribology.  117:255-260. 1995
• BOUNDARY AND MIXED FRICTION IN THE PRESENCE OF DYNAMIC NORMAL LOADS .2. FRICTION TRANSIENTS.  Journal of Tribology.  117:261-266. 1995
• SURFACE HEATING EFFECT ON LOCAL HEAT-TRANSFER IN A ROTATING 2-PASS SQUARE CHANNEL WITH 60-DEG ANGLED RIB TURBULATORS.  Journal of Turbomachinery.  117:272-280. 1995
• TRANSIENT ANALYSIS OF TILT PAD JOURNAL BEARINGS INCLUDING EFFECTS OF PAD FLEXIBILITY AND FLUID FILM TEMPERATURE.  Journal of Tribology.  117:302-307. 1995
• A STUDY OF EMBEDDED PIEZOELECTRIC LAYERS IN COMPOSITE CYLINDERS.  Journal of Applied Mechanics.  62:166-173. 1995
• Laminar Heat Transfer Between a Series of Parallel Plates With Surface-Mounted Discrete Heat Sources.  Journal of Electronic Packaging.  117:52-62. 1995
• A NONCALORIMETRIC METHOD FOR HEAT-TRANSFER COEFFICIENT MEASUREMENT OF BUILDING THERMAL ENVELOPES.  Journal of Solar Energy Engineering.  117:108-113. 1995
• A numerical investigation of the elastothermodynamic damping of fiber-reinforced metal-matrix composites.  Journal of Applied Mechanics.  62:816-818. 1995
• ANALYTICAL MODEL TO PREDICT ANNUAL SOIL SURFACE-TEMPERATURE VARIATION.  Journal of Solar Energy Engineering.  117:91-99. 1995
• ANALYTICAL MODEL TO PREDICT NONHOMOGENEOUS SOIL-TEMPERATURE VARIATION.  Journal of Solar Energy Engineering.  117:100-107. 1995
• DYNAMIC-RESPONSE OF A SINGLE FLEXIBLE CYLINDER IN WAVES.  Journal of Offshore Mechanics and Arctic Engineering: Transactions of the ASME.  117:99-104. 1995
• ELASTOTHERMODYNAMIC DAMPING OF FIBER-REINFORCED METAL-MATRIX COMPOSITES.  Journal of Applied Mechanics.  62:441-449. 1995
• THE FUNCTIONAL BASIS OF STEADY-STATE THERMAL-ENERGY USE IN AIR-SIDE HVAC EQUIPMENT.  Journal of Solar Energy Engineering.  117:31-39. 1995
• 2-DIMENSIONAL MODELS OF BOUNDARY AND MIXED FRICTION AT A LINE CONTACT.  Journal of Tribology.  117:178-184. 1995
• Boric Acid as an Additive for Core-Drilling of Alumina.  Journal of Tribology.  117:65-73. 1995
• DYNAMIC CHARACTERISTICS OF TEHD TILT PAD JOURNAL BEARING SIMULATION INCLUDING MULTIPLE-MODE PAD FLEXIBILITY MODEL.  Journal of Vibration and Acoustics: Transactions of the ASME.  117:123-135. 1995
• THEORY VERSUS EXPERIMENT FOR THE ROTORDYNAMIC CHARACTERISTICS OF A SMOOTH ANNULAR GAS SEAL AT ECCENTRIC POSITIONS.  Journal of Tribology.  117:148-152. 1995
• TURBULENT-FLOW FOIL BEARINGS FOR CRYOGENIC APPLICATIONS.  Journal of Tribology.  117:185-195. 1995
• POSTBUCKLING BEHAVIOR OF STIFFENED CROSS-PLY CYLINDRICAL-SHELLS.  Journal of Applied Mechanics.  61:998-1000. 1994
• Complete Six-Degrees-of-Freedom Nonlinear Ship Rolling Motion.  Journal of Offshore Mechanics and Arctic Engineering: Transactions of the ASME.  116:191-201. 1994
• INFLUENCE OF MAINSTREAM TURBULENCE ON HEAT-TRANSFER COEFFICIENTS FROM A GAS-TURBINE BLADE.  Journal of Heat Transfer: Transactions of the ASME.  116:896-903. 1994
• UNSTEADY WAKE EFFECT ON FILM EFFECTIVENESS AND HEAT-TRANSFER COEFFICIENT FROM A TURBINE BLADE WITH ONE ROW OF AIR AND CO2 FILM INJECTION.  Journal of Heat Transfer: Transactions of the ASME.  116:921-928. 1994
• UNSTEADY WAKE OVER A LINEAR TURBINE BLADE CASCADE WITH AIR AND CO2 FILM INJECTION .2. EFFECT ON FILM EFFECTIVENESS AND HEAT-TRANSFER DISTRIBUTIONS.  Journal of Turbomachinery.  116:730-737. 1994
• LEADING-EDGE FILM-COOLING HEAT-TRANSFER THROUGH ONE ROW OF INCLINED FILM SLOTS AND HOLES INCLUDING MAINSTREAM TURBULENCE EFFECTS.  Journal of Heat Transfer: Transactions of the ASME.  116:561-569. 1994
• Turbulent Heat Transfer Between a Series of Parallel Plates With Surface-Mounted Discrete Heat Sources.  Journal of Heat Transfer: Transactions of the ASME.  116:577-587. 1994
• GETRAN - A GENERIC, MODULARLY STRUCTURED COMPUTER CODE FOR SIMULATION OF DYNAMIC BEHAVIOR OF AERO AND POWER-GENERATION GAS-TURBINE ENGINES.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  116:483-494. 1994
• MICROMECHANICS OF ACTIVE COMPOSITES WITH SMA FIBERS.  Journal of Engineering Materials and Technology.  116:337-347. 1994
• Theories and Computational Models for Composite Laminates.  Applied Mechanics Reviews: an assessment of world literature in engineering sciences.  47:147-169. 1994
• Two-Phase Flow Correlations as Applied to Pumping Well Testing 1994
• Viscoelastic Models for Ligaments and Tendons.  Applied Mechanics Reviews: an assessment of world literature in engineering sciences.  47:s282-s286. 1994
• A Test Apparatus and Facility to Identify the Rotordynamic Coefficients of High-Speed Hydrostatic Bearings.  Journal of Tribology.  116:337-343. 1994
• ANNULAR HONEYCOMB-STATOR TURBULENT GAS SEAL ANALYSIS USING A NEW FRICTION-FACTOR MODEL-BASED ON FLAT-PLATE TESTS.  Journal of Tribology.  116:352-360. 1994
• Closure to Discussion of Effect of a Circumferential Feeding Groove on the Dynamic Force Response of a Short Squeeze Film Damper (1994, ASME J. Tribol., 116, p. 376).  Journal of Tribology.  116:376-377. 1994
• Discussion: Roughness Influence on Turbulent Flow Through Annular Seals (Lucas, Victor, Danaila, Sterian, Bonneau, Olivier, and Frne, Jean, 1994, ASME J. Tribol., 116, pp. 321328).  Journal of Tribology.  116:328-328. 1994
• EFFECT OF A CIRCUMFERENTIAL FEEDING GROOVE ON THE DYNAMIC FORCE RESPONSE OF A SHORT SQUEEZE FILM DAMPER.  Journal of Tribology.  116:369-377. 1994
• A FORMAL APPROACH TO INTEGRATING COMPUTER-AIDED PROCESS PLANNING AND SHOP-FLOOR CONTROL.  Journal of Manufacturing Science and Engineering.  116:108-116. 1994
• HEAT-TRANSFER AND FRICTION IN RECTANGULAR CHANNELS WITH RIBBED OR RIBBED-GROOVED WALLS.  Journal of Heat Transfer: Transactions of the ASME.  116:58-65. 1994
• LOCAL HEAT-TRANSFER IN ENCLOSED CO-ROTATING DISKS WITH AXIAL THROUGHFLOW.  Journal of Heat Transfer: Transactions of the ASME.  116:66-72. 1994
• A 2ND-LAW ANALYSIS OF THERMOELASTIC DAMPING.  Journal of Applied Mechanics.  61:71-76. 1994
• AN ENERGY DELIVERY EFFICIENCY INDEX TO EVALUATE SIMULTANEOUS HEATING AND COOLING EFFECTS IN LARGE COMMERCIAL BUILDINGS.  Journal of Solar Energy Engineering.  116:79-87. 1994
• Computational Modeling of Material Failure.  Applied Mechanics Reviews: an assessment of world literature in engineering sciences.  47:s34-s42. 1994
• MODELING THE EFFECT OF OXIDATION ON DAMAGE IN SIC TI-15-3 METAL-MATRIX COMPOSITES.  Journal of Engineering Materials and Technology.  116:421-427. 1994
• STUDIES ON THE RELATIVE PERFORMANCE OF 3 OSCILLATING WATER COLUMN WAVE ENERGY DEVICES 1994
• EXPERIMENTAL TEST-RESULTS FOR 4 HIGH-SPEED, HIGH-PRESSURE, ORIFICE-COMPENSATED HYBRID BEARINGS.  Journal of Tribology.  116:147-153. 1994
• INFLUENCE OF SURFACE HEATING CONDITION ON LOCAL HEAT-TRANSFER IN A ROTATING SQUARE CHANNEL WITH SMOOTH WALLS AND RADIAL OUTWARD FLOW.  Journal of Turbomachinery.  116:149-158. 1994
• INFLUENCE OF UNSTEADY WAKE ON HEAT-TRANSFER COEFFICIENT FROM A GAS-TURBINE BLADE.  Journal of Heat Transfer: Transactions of the ASME.  115:904-911. 1993
• UNEVEN WALL TEMPERATURE EFFECT ON LOCAL HEAT-TRANSFER IN A ROTATING 2-PASS SQUARE CHANNEL WITH SMOOTH WALLS.  Journal of Heat Transfer: Transactions of the ASME.  115:912-920. 1993
• Discussion: The Effects of Fixed Rotor Tilt on the Rotordynamic Coefficients of Incompressible Flow Annular Seals (Scharrer, J. K., Rubin, N., and Nelson, C. C., 1993, ASME J. Tribol., 115, pp. 336340).  Journal of Tribology.  115:340-341. 1993
• Lubrication With Binary Mixtures: Liquid-Liquid Emulsion in an EHL Conjunction.  Journal of Tribology.  115:515-522. 1993
• Lubrication With Emulsion in Cold Rolling.  Journal of Tribology.  115:523-531. 1993
• THE EFFECT OF JOURNAL MISALIGNMENT ON THE OPERATION OF A TURBULENT-FLOW HYDROSTATIC BEARING.  Journal of Tribology.  115:355-363. 1993
• ROBUST TIME-DELAY CONTROL.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  115:303-306. 1993
• Robust Time-Delay Control.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  115:303-306. 1993
• Ultrasonic Imaging and Velocimetry in Two-Phase Pipe Flow 1993
• A CHANGE-POINT PRINCIPAL COMPONENT ANALYSIS (CP/PCA) METHOD FOR PREDICTING ENERGY USAGE IN COMMERCIAL BUILDINGS - THE PCA MODEL.  Journal of Solar Energy Engineering.  115:77-84. 1993
• A GAS-OPERATED BEARING DAMPER FOR TURBOMACHINERY.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  115:383-389. 1993
• DYNAMIC FORCE RESPONSE OF AN OPEN-ENDED SQUEEZE FILM DAMPER.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  115:341-346. 1993
• Lubrication With Binary Mixtures: Bubbly Oil.  Journal of Tribology.  115:253-260. 1993
• THERMAL EFFECTS IN CRYOGENIC LIQUID ANNULAR SEALS .1. THEORY AND APPROXIMATE SOLUTION.  Journal of Tribology.  115:267-276. 1993
• THERMAL EFFECTS IN CRYOGENIC LIQUID ANNULAR SEALS .2. NUMERICAL-SOLUTION AND RESULTS.  Journal of Tribology.  115:277-284. 1993
• COMPARISON OF CRYSTAL PLASTICITY AND ISOTROPIC HARDENING PREDICTIONS FOR METAL-MATRIX COMPOSITES.  Journal of Applied Mechanics.  60:70-76. 1993
• EXPERIMENTAL INVESTIGATION OF MICRO HEAT PIPES FABRICATED IN SILICON-WAFERS.  Journal of Heat Transfer: Transactions of the ASME.  115:751-756. 1993
• USE OF SIMPLIFIED SYSTEM MODELS TO MEASURE RETROFIT ENERGY SAVINGS.  Journal of Solar Energy Engineering.  115:57-68. 1993
• Closure to Discussion of Experimental Versus Theoretical Characteristics of a High-Speed Hybrid (Combination Hydrostatic and Hydrodynamic) Bearing (1993, ASME J. Tribol., 115, p. 168).  Journal of Tribology.  115:168-169. 1993
• DYNAMIC FORCE AND MOMENT COEFFICIENTS FOR SHORT LENGTH ANNULAR SEALS.  Journal of Tribology.  115:61-70. 1993
• Discussion: Analysis for Incompressible Flow in Annular Pressure Seals (Simon, F., and Frne, J., 1992, ASME J. Tribol., 114, pp. 431438).  Journal of Tribology.  115:203-205. 1993
• EXPERIMENTAL PRESSURES AND FILM FORCES IN A SQUEEZE FILM DAMPER.  Journal of Tribology.  115:134-140. 1993
• EXPERIMENTAL VERSUS THEORETICAL CHARACTERISTICS OF A HIGH-SPEED HYBRID (COMBINATION HYDROSTATIC AND HYDRODYNAMIC) BEARING.  Journal of Tribology.  115:160-169. 1993
• HYBRID ACTIVE VIBRATION CONTROL OF ROTORBEARING SYSTEMS USING PIEZOELECTRIC ACTUATORS.  Journal of Vibration and Acoustics: Transactions of the ASME.  115:111-119. 1993
• Lubrication With Binary Mixtures: Liquid-Liquid Emulsion.  Journal of Tribology.  115:46-55. 1993
• On the Use of Micro Heat Pipes as an Integral Part of Semiconductor Devices.  Journal of Electronic Packaging.  114:436-442. 1992
• EFFECT OF UNEVEN WALL TEMPERATURE ON LOCAL HEAT-TRANSFER IN A ROTATING SQUARE CHANNEL WITH SMOOTH WALLS AND RADIAL OUTWARD FLOW.  Journal of Heat Transfer: Transactions of the ASME.  114:850-858. 1992
• ANALYSIS OF HYDROSTATIC JOURNAL BEARINGS WITH END SEALS.  Journal of Tribology.  114:802-811. 1992
• Closure to Discussion of Analysis of Short Squeeze Film Dampers With a Central Groove (1992, ASME J. Tribol., 114, p. 664).  Journal of Tribology.  114:664-665. 1992
• Closure to Discussions of Analysis of Turbulent Hydrostatic Bearings With a Barotropic Cryogenic Fluid (1992, ASME J. Tribol., 114, p. 764).  Journal of Tribology.  114:764-765. 1992
• FRICTION-FACTOR CHARACTERISTICS FOR NARROW CHANNELS WITH HONEYCOMB SURFACES.  Journal of Tribology.  114:714-721. 1992
• FRICTION-FACTOR DATA FOR FLAT-PLATE TESTS OF SMOOTH AND HONEYCOMB SURFACES.  Journal of Tribology.  114:722-730. 1992
• INFLUENCE OF HIGH MAINSTREAM TURBULENCE ON LEADING-EDGE FILM COOLING HEAT-TRANSFER.  Journal of Turbomachinery.  114:707-715. 1992
• Influence of High Mainstream Turbulence on Leading Edge Film Cooling Heat Transfer: Effect of Film Hole Row Location.  Journal of Turbomachinery.  114:716-723. 1992
• Influence of Mainstream Turbulence on Leading Edge Film Cooling Heat Transfer Through Two Rows of Inclined Film Slots.  Journal of Turbomachinery.  114:724-733. 1992
• A Two-Riccati, Feasible Algorithm for Guaranteeing Output L Constraints.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  114:329-338. 1992
• A VARIATIONAL APPROACH TO 3-DIMENSIONAL ELASTICITY SOLUTIONS OF LAMINATED COMPOSITE PLATES.  Journal of Applied Mechanics.  59:S166-S175. 1992
• A 4-PARAMETER CHANGE-POINT MODEL FOR PREDICTING ENERGY-CONSUMPTION IN COMMERCIAL BUILDINGS.  Journal of Solar Energy Engineering.  114:77-83. 1992
• Discussion: Entry Flow and Pressure Jump in Submerged Multi-Pad Bearings and Grooved Bearings (Mori, A., Makino, T., and Mori, H., 1992, ASME J. Tribol., 114, pp. 370377).  Journal of Tribology.  114:377-378. 1992
• A Constitutive Model for Bimodular Materials With an Application to Plate Bending.  Journal of Applied Mechanics.  59:220-221. 1992
• PRESSURE OSCILLATION IN THE LEAKAGE ANNULUS BETWEEN A SHROUDED IMPELLER AND ITS HOUSING DUE TO IMPELLER-DISCHARGE-PRESSURE DISTURBANCES.  Journal of Fluids Engineering.  114:61-67. 1992
• INFLUENCE OF JET-GRID TURBULENCE ON FLAT-PLATE TURBULENT BOUNDARY-LAYER FLOW AND HEAT-TRANSFER.  Journal of Heat Transfer: Transactions of the ASME.  114:65-72. 1992
• Analyses of Plastic Flow Localization in Metals.  Applied Mechanics Reviews: an assessment of world literature in engineering sciences.  45:s3-s18. 1992
• CLOSENESS OF THE SOLUTIONS OF APPROXIMATELY DECOUPLED DAMPED LINEAR-SYSTEMS TO THEIR EXACT-SOLUTIONS.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  114:369-374. 1992
• COAL-WATER SLURRY SPRAY CHARACTERISTICS OF A POSITIVE DISPLACEMENT FUEL-INJECTION SYSTEM.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  114:528-533. 1992
• THE EFFECT OF PLATE SPACING ON FREE-CONVECTION BETWEEN HEATED PARALLEL PLATES.  Journal of Heat Transfer: Transactions of the ASME.  114:515-518. 1992
• INFLUENCE OF HIGH MAINSTREAM TURBULENCE ON LEADING-EDGE HEAT-TRANSFER.  Journal of Heat Transfer: Transactions of the ASME.  113:843-850. 1991
• ANALYSIS OF VARIABLE FLUID PROPERTIES, TURBULENT ANNULAR SEALS.  Journal of Tribology.  113:694-702. 1991
• AUGMENTED HEAT-TRANSFER IN SQUARE CHANNELS WITH PARALLEL, CROSSED, AND V-SHAPED ANGLED RIBS.  Journal of Heat Transfer: Transactions of the ASME.  113:590-596. 1991
• Thermomechanical Coupling in Inelastic Solids.  Applied Mechanics Reviews: an assessment of world literature in engineering sciences.  44:361-373. 1991
• A NEW APPROACH TO MICROBUCKLING OF FIBROUS COMPOSITES.  Journal of Applied Mechanics.  58:473-479. 1991
• A Comparison of Augmentation Techniques During In-Tube Evaporation of R-113.  Journal of Heat Transfer: Transactions of the ASME.  113:451-458. 1991
• CENTRIFUGAL-ACCELERATION MODES FOR INCOMPRESSIBLE FLUID IN THE LEAKAGE ANNULUS BETWEEN A SHROUDED PUMP IMPELLER AND ITS HOUSING.  Journal of Vibration and Acoustics: Transactions of the ASME.  113:209-218. 1991
• TEST AND THEORY FOR PIEZOELECTRIC ACTUATOR-ACTIVE VIBRATION CONTROL OF ROTATING MACHINERY.  Journal of Vibration and Acoustics: Transactions of the ASME.  113:167-175. 1991
• FREE-CONVECTION BETWEEN SERIES OF VERTICAL PARALLEL PLATES WITH EMBEDDED LINE HEAT-SOURCES.  Journal of Heat Transfer: Transactions of the ASME.  113:108-115. 1991
• ON THE COMPETITION BETWEEN FAILURE AND INSTABILITY IN PROGRESSIVELY SOFTENING SOLIDS.  Journal of Applied Mechanics.  58:294-296. 1991
• TURBULENT HEAT-TRANSFER AND FRICTION IN A SQUARE CHANNEL WITH DISCRETE RIB TURBULATORS.  Journal of Turbomachinery.  113:360-366. 1991
• Evaluation of magnetic resonance velocimetry for steady flow..  Journal of Biomechanical Engineering.  112:464-472. 1990
• Evaporation and Condensation Heat Transfer and Pressure Drop in Horizontal, 12.7-mm Microfin Tubes With Refrigerant 22.  Journal of Heat Transfer: Transactions of the ASME.  112:1041-1047. 1990
• Approximate Analysis of Turbulent Hybrid Bearings. Static and Dynamic Performance for Centered Operation.  Journal of Tribology.  112:692-698. 1990
• TURBULENT HYBRID BEARINGS WITH FLUID INERTIA EFFECTS.  Journal of Tribology.  112:699-707. 1990
• ROTORDYNAMIC COEFFICIENTS AND LEAKAGE FLOW OF CIRCUMFERENTIALLY GROOVED LIQUID-SEALS.  Journal of Fluids Engineering.  112:250-256. 1990
• Heat Transfer Through Falling Film Evaporation and Boiling on Horizontal Tubes.  Journal of Heat Transfer: Transactions of the ASME.  112:744-750. 1990
• Boundary Layer Receptivity to Sound: Navier-Stokes Computations.  Applied Mechanics Reviews: an assessment of world literature in engineering sciences.  43:s175-s180. 1990
• A FINITE-ELEMENT APPROACH TO PAD FLEXIBILITY EFFECTS IN TILT PAD JOURNAL BEARINGS .1. SINGLE PAD ANALYSIS.  Journal of Tribology.  112:169-177. 1990
• A FINITE-ELEMENT APPROACH TO PAD FLEXIBILITY EFFECTS IN TILT PAD JOURNAL BEARINGS .2. ASSEMBLED BEARING AND SYSTEM-ANALYSIS.  Journal of Tribology.  112:178-182. 1990
• ADDITIONAL TEST-RESULTS FOR ROUND-HOLE-PATTERN DAMPER SEALS - LEAKAGE, FRICTION FACTORS, AND ROTORDYNAMIC FORCE COEFFICIENTS.  Journal of Tribology.  112:365-371. 1990
• TEST-RESULTS FOR TURBULENT ANNULAR SEALS, USING SMOOTH ROTORS AND HELICALLY GROOVED STATORS.  Journal of Tribology.  112:254-258. 1990
• STRESS-FIELDS OF INTERFACE DISLOCATIONS.  Journal of Applied Mechanics.  57:247-248. 1990
• 2-DIMENSIONAL HEAT-TRANSFER FROM EARTH-SHELTERED BUILDINGS.  Journal of Solar Energy Engineering.  112:43-50. 1990
• Analyses of Dynamic Ductile Crack Growth.  Applied Mechanics Reviews: an assessment of world literature in engineering sciences.  43:s258-s259. 1990
• Analyses of Interfacial Failure.  Applied Mechanics Reviews: an assessment of world literature in engineering sciences.  43:s274-s275. 1990
• Discussion: Tribological Studies of Ion-Implanted Steel Constituents Using an Oscillating Pin-on-Disk Wear Tester (Wei, R., Wilbur, P. J., Sampath, W. S., Williamson, D. L., Qu, Yi, and Wang, Li, 1990, ASME J. Tribol., 112, pp. 2734).  Journal of Tribology.  112:35-35. 1990
• ITPE TECHNIQUE APPLICATIONS TO TIME-VARYING 3-DIMENSIONAL GROUND-COUPLING PROBLEMS.  Journal of Heat Transfer: Transactions of the ASME.  112:849-856. 1990
• SPATIAL-FILTERING CONCEPTS IN DISTRIBUTED PARAMETER CONTROL.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  112:565-573. 1990
• THE MEASURED ENERGY IMPACT OF INFILTRATION IN A TEST CELL.  Journal of Solar Energy Engineering.  112:132-139. 1990
• A NEW HEAT-TRANSFER CORRELATION AND FLOW REGIME MAP FOR TUBE BUNDLES.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  112:150-156. 1990
• On the Generalization of Displacement-Based Laminate Theories.  Applied Mechanics Reviews: an assessment of world literature in engineering sciences.  42:s213-s222. 1989
• Pressure Loss Distribution in Three-Pass Rectangular Channels With Rib Turbulators.  Journal of Turbomachinery.  111:515-521. 1989
• Selection of Dynamic Sensors and Actuators in the Control of Linear Systems.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  111:389-397. 1989
• Convergence Properties of Modal Costs for Certain Distributed Parameter Systems.  Journal of Vibration and Acoustics: Transactions of the ASME.  111:272-277. 1989
• FLUID-STRUCTURE INTERACTION FORCES AT PUMP-IMPELLER-SHROUD SURFACES FOR ROTORDYNAMIC CALCULATIONS.  Journal of Vibration and Acoustics.  111:216-225. 1989
• PIEZOELECTRIC PUSHERS FOR ACTIVE VIBRATION CONTROL OF ROTATING MACHINERY.  Journal of Vibration and Acoustics.  111:298-305. 1989
• Reduction of Nitrogen Oxides in Engine Exhaust Gases by the Addition of Cyanuric Acid.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  111:387-393. 1989
• AN ENTRANCE REGION FRICTION FACTOR MODEL APPLIED TO ANNULAR SEAL ANALYSIS - THEORY VERSUS EXPERIMENT FOR SMOOTH AND HONEYCOMB SEALS.  Journal of Tribology.  111:337-343. 1989
• APPROXIMATE DESIGN OF STATICALLY LOADED CYLINDRICAL JOURNAL BEARINGS.  Journal of Tribology.  111:390-393. 1989
• Active Control of Transient Rotordynamic Vibration by Optimal Control Methods.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  111:264-270. 1989
• Annular Honeycomb Seals: Test Results for Leakage and Rotordynamic Coefficients; Comparisons to Labyrinth and Smooth Configurations.  Journal of Tribology.  111:293-300. 1989
• Heat Transfer, Pressure Drop, and Mass Flow Rate in Pin Fin Channels With Long and Short Trailing Edge Ejection Holes.  Journal of Turbomachinery.  111:116-123. 1989
• Dynamic shear band development in plane strain.  Journal of Applied Mechanics.  56:1-9. 1989
• Remarks on the Potential Cross Flow Over Tube Banks.  Journal of Applied Mechanics.  56:476-479. 1989
• TURBULENT HEAT-TRANSFER AND FRICTION IN PIN FIN CHANNELS WITH LATERAL FLOW EJECTION.  Journal of Heat Transfer: Transactions of the ASME.  111:51-58. 1989
• Turbulent Heat Transfer and Friction in Pin Fin Channels With Lateral Flow Ejection.  Journal of Heat Transfer: Transactions of the ASME.  111:51-58. 1989
• Experimental Results for Labyrinth Gas Seals With Honeycomb Stators: Comparisons to Smooth-Stator Seals and Theoretical Predictions.  Journal of Tribology.  111:161-168. 1989
• A Refined Small Strain and Moderate Rotation Theory of Elastic Anisotropic Shells.  Journal of Applied Mechanics.  55:611-617. 1988
• Modeling Rate Effects and Cyclic Loads With the Pressuremeter 1988
• An Investigation of a Residential Solar System Coupled to a Radiant Panel Ceiling.  Journal of Solar Energy Engineering.  110:172-179. 1988
• A Thermohydrodynamic Analysis of Journal Bearings Lubricated by a Non-Newtonian Fluid.  Journal of Tribology.  110:414-420. 1988
• HYBRID FINITE-ELEMENT - BOUNDARY ELEMENT SIMULATION OF ROTATING MACHINERY SUPPORTED ON FLEXIBLE FOUNDATION AND SOIL.  Journal of Vibration and Acoustics.  110:300-306. 1988
• THEORY VERSUS EXPERIMENT FOR THE ROTORDYNAMIC COEFFICIENT OF LABYRINTH GAS SEALS .2. A COMPARISON TO EXPERIMENT.  Journal of Vibration and Acoustics.  110:281-287. 1988
• HEAT-TRANSFER AND FRICTION CHARACTERISTICS IN RECTANGULAR CHANNELS WITH RIB TURBULATORS.  Journal of Heat Transfer: Transactions of the ASME.  110:321-328. 1988
• Effect of Rib Angle on Local Heat/Mass Transfer Distribution in a Two-Pass Rib-Roughened Channel.  Journal of Turbomachinery.  110:233-241. 1988
• Local Heat/Mass Transfer Distributions Around Sharp 180 deg Turns in Two-Pass Smooth and Rib-Roughened Channels.  Journal of Heat Transfer: Transactions of the ASME.  110:91-98. 1988
• EFFECT OF RIB ANGLE ON LOCAL HEAT MASS-TRANSFER DISTRIBUTION IN A 2-PASS RIB-ROUGHENED CHANNEL.  Journal of Turbomachinery.  110:233-241. 1988
• MODELING STIFFNESS LOSS IN QUASI-ISOTROPIC LAMINATES DUE TO MICROSTRUCTURAL DAMAGE.  Journal of Engineering Materials and Technology.  110:128-133. 1988
• EFFECT OF FLUID INERTIA ON THE PERFORMANCE OF SQUEEZE FILM DAMPER SUPPORTED ROTORS.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  110:51-57. 1988
• Effect of Fluid Inertia on the Performance of Squeeze Film Damper Supported Rotors.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  110:51-57. 1988
• Some Studies of the Effects of Axial Conduction in a Tube Wall on the Steady-State Laminar Convective Heat Transfer.  Journal of Heat Transfer: Transactions of the ASME.  109:1025-1028. 1987
• A CONTINUUM MODEL FOR VOID NUCLEATION BY INCLUSION DEBONDING.  Journal of Applied Mechanics.  54:525-531. 1987
• A Continuum Model for Void Nucleation by Inclusion Debonding.  Journal of Applied Mechanics.  54:525-531. 1987
• A Small Strain and Moderate Rotation Theory of Elastic Anisotropic Plates.  Journal of Applied Mechanics.  54:623-626. 1987
• Lvy Type Solutions for Symmetrically Laminated Rectangular Plates Using First-Order Shear Deformation Theory.  Journal of Applied Mechanics.  54:740-742. 1987
• Mixed Finite Element Models for Laminated Composite Plates.  Journal of Manufacturing Science and Engineering.  109:39-45. 1987
• Mixed Finite Element Models for Laminated Composite Plates.  Journal of Manufacturing Science and Engineering.  109:39-45. 1987
• AN EXPERIMENTAL COMPARISON OF SEVERAL CURRENT VISCOPLASTIC CONSTITUTIVE MODELS AT ELEVATED-TEMPERATURE.  Journal of Engineering Materials and Technology.  109:130-139. 1987
• NONLINEAR CONTROL OF A DISTRIBUTED SYSTEM - SIMULATION AND EXPERIMENTAL RESULTS.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  109:133-139. 1987
• OPTIMIZATION OF AIR-COOLED CONDENSERS 1987
• ANALYSIS FOR ROTORDYNAMIC COEFFICIENTS OF HELICALLY-GROOVED TURBULENT ANNULAR SEALS.  Journal of Tribology.  109:136-143. 1987
• Flow of a Fluid of the Differential Type in a Journal Bearing.  Journal of Tribology.  109:100-107. 1987
• Test Results for Sawtooth-Pattern Damper Seals: Leakage and Rotordynamic Coefficients.  Journal of Tribology.  109:124-128. 1987
• Test Results for Sawtooth-Pattern Damper Seals: Leakage and Rotordynamic Coefficients.  Journal of Tribology.  109:124-128. 1987
• Experimental Rotordynamic Coefficient Results for Teeth-on-Rotor and Teeth-on-Stator Labyrinth Gas Seals.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  108:599-604. 1986
• Numerical Simulations of Two-Stroke Cycle Engines Using Coal Fuels.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  108:661-668. 1986
• TEST-RESULTS FOR ROUND-HOLE-PATTERN DAMPER SEALS - OPTIMUM CONFIGURATIONS AND DIMENSIONS FOR MAXIMUM NET DAMPING.  Journal of Tribology.  108:605-611. 1986
• FLAT-PLATE FILM COOLING WITH STEAM INJECTION THROUGH ONE ROW AND 2 ROWS OF INCLINED HOLES.  Journal of Turbomachinery.  108:137-144. 1986
• THEORY VERSUS EXPERIMENT FOR THE ROTORDYNAMIC COEFFICIENTS OF ANNULAR GAS SEALS .1. TEST FACILITY AND APPARATUS.  Journal of Tribology.  108:426-432. 1986
• THEORY VERSUS EXPERIMENT FOR THE ROTORDYNAMIC COEFFICIENTS OF ANNULAR GAS SEALS .2. CONSTANT-CLEARANCE AND CONVERGENT-TAPERED GEOMETRY.  Journal of Tribology.  108:433-438. 1986
• An Iwatsubo-Based Solution for Labyrinth Seals: Comparison to Experimental Results.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  108:325-331. 1986
• EFFECTS OF FLUID INERTIA AND TURBULENCE ON THE FORCE COEFFICIENTS FOR SQUEEZE FILM DAMPERS.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  108:332-339. 1986
• Effects of Fluid Inertia and Turbulence on the Force Coefficients for Squeeze Film Dampers.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  108:332-339. 1986
• Discussion: A New Rate Principle Suitable for Analysis of Inelastic Deformation of Plates and Shells (Mukherjee, S., and Kollmann, F. G., 1985, ASME J. Appl. Mech., 52, pp. 533535).  Journal of Applied Mechanics.  53:230-230. 1986
• EFFECT OF YIELD SURFACE CURVATURE ON NECKING AND FAILURE IN POROUS PLASTIC SOLIDS.  Journal of Applied Mechanics.  53:491-499. 1986
• Reduction of Free-Edge Stress Concentration.  Journal of Applied Mechanics.  52:801-805. 1985
• Computational Mechanics.  Applied Mechanics Reviews: an assessment of world literature in engineering sciences.  38:1282-1283. 1985
• ANALYSIS AND TESTING FOR ROTORDYNAMIC COEFFICIENTS OF TURBULENT ANNULAR SEALS WITH DIFFERENT, DIRECTIONALLY-HOMOGENEOUS SURFACE-ROUGHNESS TREATMENT FOR ROTOR AND STATOR ELEMENTS.  Journal of Tribology.  107:296-306. 1985
• CONVERGENT-TAPERED ANNULAR SEALS - ANALYSIS AND TESTING FOR ROTORDYNAMIC COEFFICIENTS.  Journal of Tribology.  107:307-317. 1985
• Heat Transfer Enhancement in Channels With Turbulence Promoters.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  107:628-635. 1985
• A Technique for Producing Ice From NaCl Brine for Studying Fundamental Deformation Behavior 1985
• Synthesis of Dynamic Vibration Absorbers.  Journal of Vibration and Acoustics: Transactions of the ASME.  107:161-166. 1985
• AN ELASTIC STRESS-STRAIN RELATION FOR SPHERE ARRAYS UNDERGOING INITIAL-STAGE SINTERING.  Journal of Applied Mechanics.  52:98-104. 1985
• VIBRATION CHARACTERISTICS OF THE HPOTP (HIGH-PRESSURE OXYGEN TURBOPUMP) OF THE SSME (SPACE-SHUTTLE MAIN ENGINE).  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.  107:152-159. 1985
• A Simple Higher-Order Theory for Laminated Composite Plates.  Journal of Applied Mechanics.  51:745-752. 1984
• HEAT-TRANSFER AND FRICTION IN CHANNELS WITH 2 OPPOSITE RIB-ROUGHENED WALLS.  Journal of Heat Transfer: Transactions of the ASME.  106:774-781. 1984
• The Effects of Temperature, Stress and Salinity on the Creep of Frozen Saline Soil 1984
• FULLY PLASTIC CRACK PROBLEMS .1. SOLUTIONS BY A PENALTY METHOD.  Journal of Applied Mechanics.  51:48-56. 1984
• FULLY PLASTIC CRACK PROBLEMS .2. APPLICATION OF CONSISTENCY CHECKS.  Journal of Applied Mechanics.  51:57-64. 1984
• WAVE-ISLAND INTERACTIONS ABOUT CIRCULAR ARTIFICIAL ISLANDS 1984
• Determination of Critical Parameters in Large Flexible Space Structures With Uncertain Modal Data.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  105:238-244. 1983
• The Evolution of Computational Methods in Aerodynamics.  Journal of Applied Mechanics.  50:1052-1070. 1983
• Analysis of Transient Laminar Convective Heat Transfer Inside a Circular Duct.  Journal of Heat Transfer: Transactions of the ASME.  105:922-924. 1983
• Component Synthesis of Multicase, Rotating Machinery Trains by the Generalized Receptance Approach.  J ENG POWER TRANS ASME.  105:941-946. 1983
• DYNAMIC ANALYSIS OF TURBULENT ANNULAR SEALS BASED ON HIRS LUBRICATION EQUATION.  Journal of Lubrication Technology.  105:429-436. 1983
• Eigensolution Reanalysis of Rotor Dynamic Systems by the Generalized Receptance Method.  J ENG POWER TRANS ASME.  105:543-550. 1983
• THE USE OF A SIMPLE HEAT-TRANSFER MODEL FOR SEPARATED FLOWS IN TUBES.  Journal of Heat Transfer: Transactions of the ASME.  105:928-931. 1983
• FRACTIONAL-FREQUENCY ROTOR MOTION DUE TO NONSYMMETRIC CLEARANCE EFFECTS.  J ENG POWER TRANS ASME.  104:533-541. 1982
• Nonlinear Oscillations of Laminated, Anisotropic, Rectangular Plates.  Journal of Applied Mechanics.  49:396-402. 1982
• On the Solutions to Forced Motions of Rectangular Composite Plates.  Journal of Applied Mechanics.  49:403-408. 1982
• A NOTE ON CRITICAL-SPEED SOLUTIONS FOR FINITE-ELEMENT-BASED ROTOR MODELS 1982
• OPTIMUM DESIGN OF SPREAD MOORING SYSTEMS 1982
• Effect of Plenum Length and Diameter on Turbulent Heat Transfer in a Downstream Tube and on Plenum-Related Pressure Losses.  Journal of Heat Transfer: Transactions of the ASME.  103:415-422. 1981
• Heat Transfer from a Plate Elevated above a Host Surface and Washed by a Separated Flow Induced by the Elevation Step.  Journal of Heat Transfer: Transactions of the ASME.  103:441-447. 1981
• Nonlinear State Estimation and Feedback Control of Nonlinear and Bilinear Distributed Parameter Systems.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  103:78-83. 1981
• Vibration of Thick Rectangular Plates of Bimodulus Composite Material.  Journal of Applied Mechanics.  48:371-376. 1981
• Vibration of Thick Rectangular Plates of Bimodulus Composite Material.  Journal of Applied Mechanics.  48:371-376. 1981
• Effect of Adiabatic Co-Planar Extension Surfaces on Wind-Related Solar-Collector Heat Transfer Coefficients.  Journal of Heat Transfer: Transactions of the ASME.  103:268-271. 1981
• A Comparison of a Penalty Finite Element Model with the Stream Function-Vorticity Model of Natural Convection in Enclosures.  Journal of Heat Transfer: Transactions of the ASME.  102:659-666. 1980
• Modal Cost Analysis for Linear Matrix-Second-Order Systems.  Journal of Dynamic Systems Measurement and Control: Transactions of the ASME.  102:151-158. 1980
• The Flow of a Non-Newtonian Fluid Past Projections and Depressions.  Journal of Applied Mechanics.  47:485-488. 1980
• The Flow of a Non-Newtonian Fluid Past Projections and Depressions.  Journal of Applied Mechanics.  47:485-488. 1980
• Thermal Instability in Liquid Droplets on a Heated Surface.  Journal of Heat Transfer: Transactions of the ASME.  102:581-583. 1980
• Controllability and Observability of Linear Matrix-Second-Order Systems.  Journal of Applied Mechanics.  47:415-420. 1980
• Average Heat Transfer Coefficients for Forced Convection on a Flat Plate with an Adiabatic Starting Length.  Journal of Heat Transfer: Transactions of the ASME.  102:364-366. 1980
• Brittle Fracture of Plates in Tension: Virgin Waves and Boundary Reflections.  Journal of Applied Mechanics.  47:45-50. 1980
• AN ANALYSIS OF WRINKLING IN THE SWIFT CUP TEST.  Journal of Engineering Materials and Technology.  102:241-248. 1980
• ON THE LOCALIZATION OF BUCKLING PATTERNS.  Journal of Applied Mechanics.  47:613-619. 1980
• VOID NUCLEATION EFFECTS IN BIAXIALLY STRETCHED SHEETS.  Journal of Engineering Materials and Technology.  102:249-256. 1980
• Rub-Induced Parametric Excitation in Rotors.  Journal of Mechanical Design.  101:640-644. 1979
• Rub-Induced Parametric Excitation in Rotors 1979
• Flow and Pressure Characteristics Downstream of a Segmental Blockage in a Turbulent Pipe Flow.  Journal of Fluids Engineering.  101:200-206. 1979
• Residual-Flexibility Corrections for Transient Modal Rotordynamic Models.  Journal of Mechanical Design.  100:251-256. 1978
• Residual-Flexibility Corrections for Transient Modal Rotordynamic Models 1978
• VOID GROWTH AND LOCAL NECKING IN BIAXIALLY STRETCHED SHEETS.  Journal of Engineering Materials and Technology.  100:164-169. 1978
• The Space Shuttle Main Engine High-Pressure Fuel Turbopump Rotordynamic Instability Problem.  J ENG POWER TRANS ASME.  100:48-57. 1978
• The Space Shuttle Main Engine High-Pressure Fuel Turbopump Rotordynamic Instability Problem.  J ENG POWER TRANS ASME.  100:48-57. 1978
• A Modal Transient Rotordynamic Model for Dual-Rotor Jet Engine Systems.  Journal of Manufacturing Science and Engineering.  98:876-882. 1976
• On the Design of Mooring Lines for Deep Water Applications.  Journal of Manufacturing Science and Engineering.  98:514-522. 1976
• A Modal Transient Simulation Model for Flexible Asymmetric Rotors.  Journal of Manufacturing Science and Engineering.  98:312-319. 1976
• DESIGN OF MOORING LINES FOR DEEP-WATER APPLICATIONS.  Journal of Manufacturing Science and Engineering.  98:514-522. 1976
• Two Jeffcott-Based Modal Simulation Models for Flexible Rotating Equipment.  Journal of Manufacturing Science and Engineering.  97:1000-1014. 1975
• Two Jeffcott-Based Modal Simulation Models for Flexible Rotating Equipment.  Journal of Manufacturing Science and Engineering.  97:1000-1014. 1975
• A Rotor-Fixed Modal Simulation Model for Flexible Rotating Equipment.  Journal of Manufacturing Science and Engineering.  96:659-669. 1974
• VOID GROWTH IN AN ELASTIC-PLASTIC MEDIUM.  Journal of Applied Mechanics.  39:964-970. 1972
• Void Growth in an Elastic-Plastic Medium.  Journal of Applied Mechanics.  39:964-970. 1972
• Surge Waves in Stranded Springs.  Journal of Manufacturing Science and Engineering.  94:942-948. 1972
• Computational Mechanics.  Ed. 38.  1985
• Transient Temperature and Heat Flux Measurement Using Thin-Film Microsensors.  55-74. 2017
• Fitting a Function and Its Derivative.  469-474. 2007
• Binary Time Series Prediction Using Recurrent Networks.  785-790. 2006
• Multi-Information Source Fusion and Optimization to Realize ICME: Application to Dual-Phase Materials.  Journal of Mechanical Design. 2018
• Assessment of Binary Pressure Sensitive Paint for Temperature and Heat Transfer Coefficient Measurement of Leading Edge Film Cooling 2022
• Comparative Analysis of Coefficient of Performance (COP) Correlations of Single-Effect Vapor Absorption Refrigeration (VAR) Cycle 2022
• Deploying Machine Learning (ML) for Improving Reliability and Resiliency of Thermal Energy Storage (TES) Platforms by Leveraging Phase Change Materials (PCM) for Sustainability Applications and Mitigating Food-Energy-Water (FEW) Nexus 2022
• Design, Fabrication and Testing of a Novel Thermally-Actuated Tesla Valve (TATV): A Hybrid Microvalve 2022
• Experimental Investigation of Solar-Thermal Desalination Platform Leveraging Dynamic Flash Evaporation and Swirl Flow Separator 2022
• Experimental Investigation of Thermal Energy Storage (TES) Platform Leveraging Phase Change Materials in a Chevron Plate Heat Exchanger 2022
• Experimental Study of the Nano-Fin Effect (nFE) During Thin Film Evaporation From Nanopores in Anodic Aluminum Oxide (AAO) Membrane Substrates Integrated With Nano-Thermocouple / Thin Film Thermocouple (TFT) Array 2022
• Investigation of Mass Savings Potential of Zeolite Integrated Motor Thermal Management Systems in All-Electric Commercial Aircraft 2022
• On the Observability of Quantum Dynamical Systems 2022
• Influence of Matrix Material on Impact Properties of Chopped Carbon Fiber-Thermoplastic Composites Made Using FDM/FFF 2022
• System Architecture and Design Parameters for Extrusion-Based Autonomous Construction Systems 2022
• Design for Multi-Material Manufacturing Using Polyjet Printing Process: A Review 2022
• Validation of Low and High-Fidelity Turbulence Models for Prediction of Turbulent Heat Transfer in Low Prandtl Number Flows Under Buoyant and Separated Flow Conditions 2022
• QuickProbe : Quick Physical Prototyping-in-Context Using Physical Scaffolds in Digital Environments 2022
• ShapOrator: Enabling Design Iteration for Young Designers Through Shape Verbalization 2022
• Short Paper: An Initial Investigation of the Correlations Between the Quality of Engineering Assignments and Task-Independent Features 2022
• Characterization of an Apparatus to Study Solid Deposit Formation in Lubricating Oils at High Temperatures 2022
• Ignition Chemistry of Syngas Highly Diluted in CO2 2022
• A Model and Experimental Validation for a Piston Rings - Squeeze Film Damper: A Step Toward Quantifying Air Ingestion 2022
• A Nonlinear Rotordynamics Model for Automotive Turbochargers Coupled to a Physical Model for a (Semi) Floating Ring Bearing System 2022
• A Stepped Shaft Labyrinth Seal vs. a Pocket Damper Seal: Leakage and Dynamic Force Coefficients Under Wet Gas Operation 2022
• Effect of a Reduced Oil Flow Rate on the Static and Dynamic Performance of a Tilting Pad Journal Bearing Running in Both the Flooded and Evacuated Conditions 2022
• Experimental Evaluation of a Wavy Trailing Edge Cooling Design as an Alternative to Pressure Side Cutback Cooling 2022
• Experimental Force Coefficients for a Fully-Partitioned Pocket Damper Seal and Comparison to Other Two Seal Types 2022
• Heat Transfer in a Rotating, Blade-Shaped, Two-Pass Cooling Channel With Various 45 Deg Rib Turbulators and a Tip Turning Vane 2022
• Measured Leakage and Rotordynamic Force Coefficients for Two Liquid Annular Seal Configurations: Smooth-Rotor/Grooved-Stator Versus Grooved-Rotor/Smooth-Stator 2022
• Optimized Film Cooling Flow on a Contoured Endwall Within a Transonic Annular Cascade 2022
• VERIFICATION ASSESSMENT OF THERMAL MODELS IN CONJUGATE HEAT TRANSFER ANALYSIS OF SMALL-SCALE HEAT SINKS 2022
• A Comparison of Graph-Theoretic Approaches for Resilient System of Systems Design 2022
• An Algorithm for Multi-Objective Efficient Parametric Optimization 2022
• An Empirical Study of the Impact of Task Expectation Framing on Design Decision Delegation 2022
• Evaluating Designer Learning and Performance in Interactive Deep Generative Design 2022
• Improving Designer Learning in Design Space Exploration by Adapting to the Designers Learning Goals 2022
• Patent Mining to Understand Functional Evolution of Engineered Products 2022
• Temperature Compensation for Electromechanical Impedance Signatures With Data-Driven Modeling 2022
• WIRELESS, BATTERY FREE WEARABLE ELECTRONIC NOSE 2022
• A NOVEL TRILOGY OF E-STEM PROGRAMS 2021
• ANALYSIS OF FILM COOLING EFFECTIVENESS ON A GAS TURBINE BLADE WITH AN UNSTEADY WAKE USING FAST RESPONSE PRESSURE SENSITIVE PAINT 2021
• ASSESSMENT OF LOW AND HIGH-FIDELITY TURBULENCE MODELS FOR LIQUID METAL FLOW PREDICTIONS 2021
• An Adaptive Control Framework for Unknown Input Estimation 2021
• DRILLSTRING SIMULATOR: A NOVEL SOFTWARE MODEL FOR STICK-SLIP AND BIT-BOUNCE VIBRATIONS 2021
• EFFECT OF INLET GEOMETRY ON FLAT PLATE, FILM COOLING EFFECTIVENESS FROM SHAPED HOLES 2021
• EVALUATING THE IMPACT OF CYBER-ATTACKS ON GRID-INTERACTIVE EFFICIENT BUILDINGS 2021
• HARDWARE-IN-THE-LOOP SIMULATION FOR LARGE-SCALE APPLICATIONS 2021
• REINFORCED CONCRETE BARRIER MODELING IN-SERIES IMPACTS IN LS-DYNA 2021
• TRIBOLOGICAL EVALUATION OF A HIGH-PERFORMANCE COMPOSITE COATING 2021
• FLUID FLOW AND HEAT TRANSFER OF LIQUID SODIUM IN SMALL-SCALE HEAT SINKS WITH DIFFERENT GEOMETRIES 2021
• Time Resolved PIV Measurements of a Slot Lobed Jet Issuing Into a Crossflow 2021
• A PRELIMINARY EVALUATION OF THE COMPUTATIONAL FLUID DYNAMICS CAPABILITIES IN MOOSE 2021
• COMPARISON OF PEBBLE BED VELOCITY PROFILES BETWEEN HIGH-FIDELITY AND INTERMEDIATE-FIDELITY CODES 2021
• A COMPREHENSIVE REVIEW OF 4D FLOW MRI AND CFD IN CARDIOVASCULAR AND CONGENITAL HEART DISEASE 2021
• A COMPREHENSIVE REVIEW OF THREE-DIMENSIONAL NEURO-ORGANOIDS AND ENGINEERING BRAIN-ON-A-CHIP MICROFLUIDIC DEVICES 2021
• DESIGN, MICROFABRICATION AND TESTING OF BRAIN-ON-A-CHIP (BOC) PLATFORM USING NEURAL ORGANOIDS (SPHEROIDS) 2021
• Designing Robust Systems Using Bioinspired Product Architecture 2021
• Experimental Evaluation of Novel Swirl Flow Air-Water Separation Apparatus for Desalination/Water Remediation Applications 2021
• Investigating Mind-Mapping as a Tool for Problem Exploration in Early Design 2021
• Orthopedic Bone-Drilling Assessment Through Laplacian-Based Trajectory Noise Characterization 2021
• Quantifying the Predictive Abilities of Speculative Fiction: A Feasibility Study 2021
• A THERMALLY ACTUATED MICROVALVE FOR SMART IRRIGATION IN PRECISION AGRICULTURE APPLICATIONS 2021
• Combustion and Oxidation of Lube Oils at Gas Turbine Conditions: Experimental Methods 2021
• A Model for Tilting Pad Thrust Bearings Operating With Reduced Flow Rate Do Benefits Outweigh Risks? 2021
• An Analytical Two-Phase Flow Model for Prediction of Leakage in Wet Gas Labyrinth Seals and Pocket Damper Seals. Is Simplicity Still Desired? 2021
• CFD Analysis of the Influence of Gas Content on the Rotordynamic Force Coefficients for a Circumferentially Grooved Annular Seal for Multiple Phase Pumps 2021
• CHARACTERIZATION OF CO-CR-MO ALLOYS MANUFACTURING VIA DIRECTED ENERGY DEPOSITION 2021
• Effect of Pad Material, Copper vs. Steel, on the Performance of a Tilting Pad Journal Bearing: Measurements and Predictions 2021
• Heat Transfer in Rotating, Trailing Edge, Converging Channels With Full and Partial Height Strip-Fins 2021
• Heat Transfer in a Rotating, Blade-Shaped, Two-Pass Cooling Channel With a Variable Aspect Ratio 2021
• Influence of Coolant Density on Turbine Blade Film Cooling at Transonic Cascade Flow Conditions Using the Pressure Sensitive Paint Technique 2021
• Jet Impingement Heat Transfer in a Rectangular Channel With Smooth and Pinned Target Walls 2021
• Making Better Swirl Brakes Using Computational Fluid Dynamics: Performance Enhancement From Geometry Variation 2021
• Measurements of Static and Dynamic Load Performance of a 102 mm Carbon-Graphite Porous Surface Tilting-Pad Gas Journal Bearing 2021
• Measurements to Quantify the Effect of a Reduced Flow Rate on the Performance of a Tilting Pad Journal Bearing (LBP) With Flooded Ends 2021
• On the Experimental Dynamic Force Performance of a Squeeze Film Damper Supplied Through a Check Valve and Sealed With O-Rings 2021
• Selective Laser Melting of Stainless Steel 316L for Mechanical Property-Gradation 2021
• Thermal Performance of Double-Sided, Partial Height Strip Fin Arrays in a High Aspect Ratio, Rectangular Channel 2021
• ASYMMETRICAL HEAT DISTRIBUTION PATTERN IN MINATURE HEAT SINKS DUE TO CONJUGATE HEAT TRANSFER 2021
• ERROR QUANTIFICATION OF NUSSELT NUMBER ANALYSIS IN MINIATURE HEAT SINKS: VERIFICATION AND VALIDATION ASSESSMENT 2021
• RESPONSE EFFECTS DUE TO POLYGONAL REPRESENTATION OF PORES IN POROUS MEDIA THERMAL MODELS 2021
• Bayesian Calibrating Educational Building Thermal Models to Hourly Indoor Air Temperature: Methodology and Case Study 2021
• Bayesian Inference Calibration of Building Energy Models for Arid Weather 2021
• Estimation of Room-Level Cooling Energy in Hot/Arid Climate by Machine Learning-Based Approaches 2021
• Computational Design of Compositionally Graded Alloys for Property Monotonicity.  Journal of Mechanical Design. 2021
• A Framework to Study Human-AI Collaborative Design Space Exploration 2021
• A Novel Method for Calculating the Parametric Hypervolume Indicator 2021
• Automatic Composition of Encoding Scheme and Search Operators in System Architecture Optimization 2021
• COMPARATIVE ENERGY AND EXERGY ANALYSIS OF LARGE CAPACITY AMMONIAWATER AND WATER-LITHIUM BROMIDE VAPOR ABSORPTION REFRIGERATION (VAR) CYCLES 2021
• COUPLED TIME-DOMAIN HYDRO-ELASTIC SIMULATION FOR SUBMERGED FLOATING TUNNEL UNDER WAVE EXCITATIONS 2021
• Developing a Supply Chain Modeling Approach to Facilitate Ecology-Inspired Design for Sustainability and Resilience 2021
• EXPERIMENTAL, NUMERICAL, AND STATISTICAL INVESTIGATION OF TWO PHASE FLOW IN A CYLINDRICAL PERFORATION TUNNEL 2021
• IMPACT OF URBAN MICROCLIMATE ON AIR CONDITIONING ENERGY CONSUMPTION USING DIFFERENT CONVECTIVE HEAT TRANSFER COEFFICIENT CORRELATIONS AVAILABLE IN BUILDING ENERGY SIMULATION TOOLS 2021
• INVESTIGATION OF FLOWZAN AS NON-NEWTONIAN CUTTING TRANSPORT FLUID IN DIRECTIONAL DRILLING APPLICATIONS VIA ELECTRICAL RESISTANCE TOMOGRAPHY METHOD 2021
• INVESTIGATION OF GAS-LIQUID FLOW USING ELECTRICAL RESISTANCE TOMOGRAPHY AND WAVELET ANALYSIS TECHNIQUES FOR EARLY KICK DETECTION 2021
• Leveraging Design Heuristics for Multi-Objective Metamaterial Design Optimization 2021
• MICROWAVE SYNTHESIS OF PLANT-BASED SUPERCAPACITOR ELECTRODES FOR FLEXIBLE ELECTRONICS 2021
• MODIFIED OPERATING PARAMETER-BASED IYER CORRELATION FOR THE COEFFICIENT OF PERFORMANCE (COP) PREDICTION OF DIFFERENT FLUID PAIRS IN DOUBLE-EFFECT VAPOR ABSORPTION REFRIGERATION (VAR) CYCLES 2021
• Nuclear Power: On PRA and Protective System Maintenance 2021
• Optically Observed Turbulence In Thrust Collars at Low Critical Reynolds Number Including Numerical Predictions 2021
• PARAMETRIC OPTIMIZATION OF SMA TORSIONAL ACTUATORS FOR AIRCRAFT MORPHING APPLICATIONS 2021
• PREDICTION OF PRESSURE DROPS IN LIQUID-LIQUID TWO-PHASE FLOW ACROSS CIRCULAR CHANNELS 2021
• RESIDENTIAL APPLIANCE USAGE PATTERNS FROM OVERALL ENERGY CONSUMPTION DATA: A STATISTICAL MACHINE LEARNING APPROACH 2021
• Supporting Designer Learning and Performance in Design Space Exploration: A Goal-Setting Approach 2021
• THERMODYNAMIC, ENVIRONMENTAL AND COST EVALUATION OF COMPRESSIONABSORPTION PARALLEL AND CASCADE REFRIGERATION CHILLER 2021
• The Role of Protective System Reliability Analysis in the Study of System Safety 2021
• UPLIFT CAPACITY OF SUCTION CAISSONS IN SAND FOR GENERAL CONDITIONS OF DRAINAGE 2021
• A Comparative Study of Active Control Methods for Mitigation of Torsional Stick-Slip Vibrations in Drillstring Systems 2020
• An Innovative Design for Drillstring Testbed for High Pressure High Temperature Drilling 2020
• An Integrated Engineering Agriculture STEM Program 2020
• Development of a Novel Modular Robot for Vertical Pipeline Climbing 2020
• Numerical Simulations and Validation of Engine Performance Parameter in Direct Injection Spark Ignition (DISI) Engines Using Chemical Kinetics 2020
• DESIGN AND SYNTHESIS OF A HIGH PERFORMANCE COATING 2020
• Augmentation of Fixed Gain Controlled Infinite Dimensional Systems With Direct Adaptive Control 2020
• Pulsating Flow Past a Square Cylinder: Analysis of Force Coefficient Spectra and Vortex Structure Development.  Journal of Fluids Engineering. 2020
• Auto-Ignition of Gas Turbine Lubricating Oils in a Shock Tube Using Spray Injection 2020
• Laminar Flame Speed Measurements of Kerosene-Based Fuels Accounting for Uncertainties in Mixture Average Molecular Weight 2020
• Laminar Flame Speeds of Oxy-Methane Flames With CO2 Dilution at Elevated Pressures 2020
• On the Leakage and Dynamic Force Coefficients of a Novel Stepped Shaft Pocket Damper Seal: Experimental and Numerical Verification 2020
• THERMAL INFLUENCE ON PRINTLET QUALITY IN THE SELECTIVE LASER SINTERING OF PHARMACEUTICAL FORMULATIONS 2020
• A Computational Model for the Analysis of the Static Forced Performance of Self-Equalizing Tilting Pad Thrust Bearings 2020
• A Thermo-Hydrodynamic Model for Thermal Energy Flow Management in a (Semi) Floating Ring Bearing System for Automotive Turbochargers 2020
• CHARACTERIZATION OF HIGH-DENSITY WC-CO BULK STRUCTURES FABRICATED BY SELECTIVE LASER MELTING 2020
• CO and OH Imaging in Flames Using a Single Broadband Femtosecond Laser Pulse 2020
• DESIGNING A MORPHABLE PARABOLIC REFLECTOR ANTENNA USING ORIGAMI-INSPIRED DISCRETIZATION AND EFFICIENT GLOBAL OPTIMIZATION 2020
• DEVELOPMENT AND EXPERIMENTAL DEMONSTRATION OF A SHAPE MEMORY ALLOY-BASED ADAPTIVE TWO-PHASE RADIATOR FOR SPACE APPLICATIONS 2020
• Experiments With a Rotor-Hybrid Gas Bearing System Undergoing Maneuver Loads From its Base Support 2020
• GRAPH-BASED INTERPRETATION OF L-SYSTEM ENCODINGS TOWARD AEROELASTIC TOPOLOGY OPTIMIZATION OF A MORPHING AIRFOIL IN SUPERSONIC FLOW 2020
• Gas Labyrinth Seals: Improved Prediction of Leakage in Gas Labyrinth Seals Using an Updated Kinetic Energy Carry-Over Coefficient 2020
• Generating Structure-Borne Traveling Waves Favorable for Applications 2020
• Heat Transfer and Pressure Loss in a Two-Pass, Rectangular Channel Featuring a Reduced Cross-Sectional Area After the 180-Degree Tip Turn With Different Turning Vane Configurations 2020
• Heat Transfer in Rotating, Trailing Edge, Converging Channels With Smooth Walls and Pin-Fins 2020
• Heat Transfer in a Rotating, Two-Pass, Variable Aspect Ratio Cooling Channel With Profiled V-Shaped Ribs 2020
• Investigation of Porosity and Microstructure-Induced Property Variations in Additive Manufactured Stainless Steel 316L 2020
• MORPHING AIRFOIL DESIGN VIA L-SYSTEM GENERATED TOPOLOGY OPTIMIZATION 2020
• NANO-SCALE HARDNESS & ABRASION RESISTANCE OF DIRECTED ENERGY DEPOSITED CO-CR-MO BIOMEDICAL ALLOY 2020
• On the Effect of Clearance on the Leakage and Cavity Pressures in an Interlocking Labyrinth Seal Operating With and Without Swirl Brakes: Experiments and Predictions 2020
• On the Effect of Supplied Flow Rate to the Performance of a Tilting-Pad Journal Bearing: Static Load and Dynamic Force Measurements 2020
• On the Effect of the Gap of End Seals on Force Coefficients of a Test Integral Squeeze Film Damper: Experiments and Predictions 2020
• Part Authentication Using Indirect Electromechanical Impedance Measurements 2020
• The Transport Mechanisms and Dynamics of Shale via Multiscale Multiphysics Pore Network Modeling 2020
• Upstream Film Cooling on the Contoured Endwall of a Transonic Turbine Vane in an Annular Cascade 2020
• BIO-INSPIRED HUMAN NETWORK DESIGN: A MULTI-CURRENCY ROBUSTNESS METRIC INSPIRED BY ECOLOGICAL NETWORK ANALYSIS 2020
• BIO-INSPIRED MODELING APPROACHES FOR HUMAN NETWORKS WITH LINK DISSIPATION 2020
• Fostering Function-Sharing Using Bioinspired Product Architecture 2020
• Comparison of the Behavior of Different Jet Configurations in a Crossflow 2020
• DEPOSITION VELOCITY AND PENETRATION EFFICIENCY IN A SQUARE CHANNEL USING A LAGRANGIAN-BASED MODELING APPROACH 2020
• TURBULENT FLOW CHARACTERISTICS IN A BLOCKED EXTERIOR SUBCHANNEL OF A HELICALLY WRAPPED ROD BUNDLE 2020
• A THERMALLY ACTUATED MICROVALVE FOR IRRIGATION IN PRECISION AGRICULTURE APPLICATIONS 2020
• Bioinspired Origami: Case Studies Using a Keyword Search Algorithm 2020
• CURRENT STATE OF THE ART: PROBLEM-DRIVEN MULTI-FUNCTIONAL BIO-INSPIRED DESIGNS 2020
• Computational Fluid Dynamics Simulation of the Transient Behavior of Liquid Loading in Gas Wells 2020
• Generative Infills for Additive Manufacturing Using Space-Filling Polygonal Tiles 2020
• Kinesthetic Perceptual Symmetry in Bi-Manual Interactions: An Exploratory Study 2020
• Modeling of Crack Propagation in Defective X100 Line Pipes 2020
• Monitoring-System Development of Gillnet Using Artificial Neural Network 2020
• Nonlinear Time-Domain Simulation of the Heaving-Buoy Type Wave Energy Converter by Using Three-Dimensional Potential Numerical Wave Tank Under Irregular Wave Conditions 2020
• Second Order Difference Frequency Wave-Current Loading Using Kelvin-Newman Approximation 2020
• EFFECT OF LOCALIZED BLOCKAGES ON THE FRICTION FACTOR OF A 61-PIN WIRE-WRAPPED BUNDLE.  Proceedings of the ASME Fluids Engineering Division Summer Meeting. 2020
• MULTIPHASE FLOW DEVELOPMENT ON SINGLE PARTICLE MIGRATION IN LOW REYNOLDS NUMBER FLUID DOMAINS.  Proceedings of the ASME Fluids Engineering Division Summer Meeting. 2020
• THERMAL-FLUID ANALYSIS AND OPTIMIZATION OF MICRO-SCALE HEAT SINKS WITH SLIP BOUNDARY CONDITION USING ENTROPY GENERATION MINIMIZATION METHOD.  Proceedings of the ASME Fluids Engineering Division Summer Meeting. 2020
• TURBULENT FLOW MEASUREMENTS AND VISUALIZATIONS OF SUPERSONIC JETS IMPINGING ON A FLAT PLATE AND AN INCLINED PLATE.  Proceedings of the ASME Fluids Engineering Division Summer Meeting. 2020
• A NUMERICAL STUDY OF FORCED CONVECTIVE HEAT TRANSFER CHARACTERISTICS OF SUPERCRITICAL FLUID IN A HORIZONTAL CIRCULAR-PIPE 2020
• AN INVESTIGATION ON CHEVRON PLATE HEAT EXCHANGER FILLED WITH ORGANIC PHASE CHANGE MATERIAL 2020
• Application of Machine Learning for Enhancing the Transient Performance of Thermal Energy Storage Platforms for Supplemental or Primary Thermal Management 2020
• Comparison of Thermal Performance of 3 D Printed Shell and Tube Heat Exchanger with Commercial Plate Heat Exchanger for Thermal Energy Storage (TES) by Incorporating Phase Change Materials (PCM) 2020
• Experimental Study of a Novel Hydro-Cyclone Apparatus (HCA) using Flash Evaporation for Desalination and Water Remediation/Purification 2020
• Evaluation of Pore Geometry Effects on Porous Cell Thermal Behavior 2020
• High-Fidelity Calculation of Effective Thermal Response of Composite Media With Heat Generation Source 2020
• On the Influence of Gas Content on the Rotordynamic Force Coefficients of a Three-Wave (Air in Oil) Annular Seal for Multiple Phase Pumps.  Journal of Fluids Engineering. 2020
• A General-Purpose Test Facility for Evaluating Gas Lubricated Thrust Bearings 2020
• A Novel Controlled-Motion Test Rig to Evaluate Effect of Synchronous and Subsynchronous Lateral Vibration on Reliability and Performance of Mechanical Seals in Pumps 2020
• Additively Manufactured Compliant Hybrid Gas Thrust Bearing for sCO2 Turbomachinery: Experimental Evaluation and Fluid-Structure Model Predictions 2020
• An Initial Guess Free Method for Least Squares Parameter Estimation in Nonlinear Models 2020
• Crack Deflection Near a Ply Interface in a Composite Laminate 2020
• Dynamic Response Comparison of Mono and Dual Submerged Floating Tunnels 2020
• Efficient Parametric Optimization for Expensive Single Objective Problems 2020
• Energetic and Economic Potential for Load Control for Residential Customers in Austin, TX 2020
• Exploring System of Systems Resilience vs. Affordability Trade-Space Using a Bio-Inspired Metric 2020
• Extending the Use of Bio-Inspiration for Water Distribution Networks to Urban Settings 2020
• Measuring Human Learning in Design Space Exploration to Assess Effectiveness of Knowledge Discovery Tools 2020
• Novel Approach for Optical Characterization of Thrust Collar Lubricated Area: Experimental and Numerical Results 2020
• Thermal and Electrical Performance Analysis of a Novel Medium Concentration Dual Photovoltaic System for Different Phase Change Materials 2020
• A Model Engineering-Based STEM Learning Program 2019
• Experimental Study of Surrogate Particle Transport and Deposition in a Square Channel Using Particle Tracking Technique 2019
• Numerical Study of Particle Transport and Deposition in a Horizontal Channel Using a Lagrangian-Based Modelling Approach 2019
• A NOVEL NONLINEAR TIME-FREQUENCY STRATEGY FOR STABILIZING INVERTED PENDULUM CART SYSTEM.  v04bt06a025-v04bt06a025. 2019
• GA OPTIMIZED FORMATION CONTROL OF AUTONOMOUS UNDERWATER VEHICLES.  v04at06a059-v04at06a059. 2019
• SIMULATING EDDY CURRENT SENSORS IN BLADE TIP TIMING APPLICATION: MODELING AND EXPERIMENTAL VALIDATION.  v009t12a058-v009t12a058. 2019
• Model-Based Analysis of a Photovoltaic Array Powering a Flywheel Energy Storage System 2019
• Thermal Characterization of a Turbulent Free Jet with Planar Laser Induced Fluorescence (PLIF).  Journal of Thermal Science and Engineering Applications. 2019
• EXPERIMENTAL STUDY OF THE STATIC AND DYNAMIC CHARACTERISTICS OF A LONG (L/D=0.75) LABYRINTH ANNULAR SEAL OPERATING UNDER TWO-PHASE (LIQUID/GAS) CONDITIONS.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 2019
• LEAKAGE AND DYNAMIC FORCE COEFFICIENTS OF A POCKET DAMPER SEAL OPERATING UNDER A WET GAS CONDITION: TESTS VS. PREDICTIONS.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 2019
• Generation and Mapping of Minimally-Restrictive Manufacturability Constraints for Mechanical Design Problems 2019
• Overview of the Development and Enforcement of Process-Driven Manufacturability Constraints in Product Design 2019
• Collaborative Mind-Mapping: A Study of Patterns, Strategies, and Evolution of Maps Created by Peer-Pairs 2019
• Piezoelectric Subordinate Oscillator Arrays: Performance Recovery and Robustness to Uncertainty 2019
• A COMPREHENSIVE STUDY OF ASYMMETRIC MICRO-DROPLET SPLITTING IN T-JUNCTION 2019
• A VALIDATION EXPERIMENT FOR TURBULENT MIXING IN A COLLATED JET 2019
• Experimental Investigations of a Comb-Like Film Cooling Scheme 2019
• NUMERICAL INVESTIGATION OF FLOW AND HEAT TRANSFER CHARACTERISTICS FOR ATTACHED AND SEPARATED LOW-PR FLOWS 2019
• ON THE INFLUENCE OF GAS CONTENT ON THE ROTORDYNAMIC FORCE COEFFICIENTS OF A THREE-WAVE (AIR IN OIL) ANNULAR SEAL FOR MULTIPLE PHASE PUMPS 2019
• PREDICTIVE MODEL FOR TWO-PHASE FLOW PERFORMANCE OF MIXED FLOW PUMPS 2019
• Study of a Microfluidic System Based One-Step Blood Cell-Free Region for Biomarker Detection 2019
• VALIDATION AND DEVELOPMENT OF DNS DATABASE FOR LOW PRANDTL NUMBERS IN ROD BUNDLE 2019
• Comparison of Model Predictions and Performance Test Data for a Prototype Thermal Energy Storage Module 2019
• AN INVESTIGATION OF LAMINAR FLAME SPEED OF CH4-O-2-CO2 MIXTURES 2019
• CARBON MONOXIDE EMISSION MEASUREMENTS FROM A SUPERCRITICAL CO2 COMBUSTOR RIG USING A MID-INFRARED LASER ABSORPTION DIAGNOSTIC 2019
• CH Kinetics Measurements and Their Importance for Modeling Prompt NOx Formation in Gas Turbines 2019
• EFFECT OF STEAM DILUTION ON LAMINAR FLAME SPEEDS OF SYNGAS FUEL BLENDS AT ELEVATED PRESSURES AND TEMPERATURES 2019
• Laminar Flame Speed Experiments of Alternative Liquid Fuels 2019
• VALIDATION OF A NEW TURBULENT FLAME SPEED FACILITY FOR THE STUDY OF GAS TURBINE FUEL BLENDS AT ELEVATED PRESSURE 2019
• A NEW PHYSICS BASED UNSTEADY TRANSITION MODEL USING THE UNIVERSAL INTERMITTENCY FUNCTION 2019
• AUTOIGNITION STUDY OF "GAS-TO-LIQUID" FISCHER-TROPSCH JET FUELS 2019
• AUTOMATED SUBSEA ARCHITECTURE OPTIMIZATION USING LOW-DIMENSIONAL MULTIPHASE FLOW MODELS.  International Conference on Ocean Offshore and Arctic Engineering. 2019
• COMBUSTION CHARACTERIZATION OF A FUEL-FLEXIBLE PILOTED LIQUID-SPRAY FLAME APPARATUS USING ADVANCED LASER DIAGNOSTICS 2019
• DEVELOPMENT OF A HYBRID HEAT SINK FOR THERMAL MANAGEMENT OF PHOTOVOLTAIC CELLS 2019
• DYNAMIC BEHAVIOR OF THE ULTRA-HIGH EFFICIENCY GAS TURBINE ENGINE, UHEGT, WITH STATOR INTERNAL COMBUSTION 2019
• EFFECT OF PAD AND LINER MATERIAL PROPERTIES ON THE STATIC LOAD PERFORMANCE OF A TILTING PAD THRUST BEARING 2019
• HIGH-SPEED SPECTRALLY RESOLVED IMAGING STUDIES OF SPHERICALLY EXPANDING NATURAL GAS FLAMES UNDER GAS TURBINE OPERATING CONDITIONS 2019
• Influence of Hole Inlet Geometry on the Film Cooling Effectiveness from Shaped Film Cooling Holes 2019
• Leakage and Cavity Pressures in an Interlocking Labyrinth Gas Seal: Measurements vs. Predictions 2019
• Leakage and Dynamic Force Coefficients of a Pocket Damper Seal Operating Under a Wet Gas Condition: Tests vs. Predictions 2019
• Leakage and Force Coefficients of a Grooved Wet (Bubbly Liquid) Seal for Multiphase Pumps and Comparisons With Prior Test Results for a Three Wave Seal 2019
• MODEL AND EXPERIMENTAL VERIFICATION OF THE DYNAMIC FORCED PERFORMANCE OF A TIGHTLY SEALED SQUEEZE FILM DAMPER SUPPLIED WITH A BUBBLY MIXTURE 2019
• NUMERICAL AND MECHANISTIC MODELLING OF TWO-PHASE LIQUID -GAS FLOW'S PRESSURE DROP ACROSS SHARP -EDGED ORIFICES.  International Conference on Ocean Offshore and Arctic Engineering. 2019
• NUMERICAL STUDY ON COOLING CHARACTERISTICS OF DOUBLE-ROW CYLINDRICAL HOLES ON UPSTREAM ENDWALL 2019
• Pump Grooved Seals: a CFD Approach to Improve Bulk-Flow Model Predictions 2019
• REVIEW ON BUBBLE DYNAMICS IN MICROCHANNEL HEAT SINK 2019
• Thermal Characterization of a Turbulent Free Jet With Planar Laser Induced Fluorescence (PLIF) 2019
• Thermal Development of an Impinging Jet Using Planar Laser Induced Fluorescence (PLIF) 2019
• Computational Evaluation of Thermal Barrier Coatings: Two-Phase Thermal Transport Analysis 2019
• Rigorous Code Verification: An Additional Tool to Use With the Method of Manufactured Solutions 2019
• NOVEL BIO-SYNTHETIC GRAFT FOR TRACHEAL RECONSTRUCTION IN PEDIATRIC PATIENTS WITH CONGENITAL TRACHEAL STENOSIS: IN VITRO STUDIES OF AXIAL, AND BENDING BIOMECHANICS.  v001t10a006-v001t10a006. 2019
• CH KINETICS MEASUREMENTS AND THEIR IMPORTANCE FOR MODELING PROMPT NOx FORMATION IN GAS TURBINES.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 2019
• SIMULATION, TEST AND MITIGATION OF 1/2X FORWARD WHIRL FOLLOWING ROTOR DROP ONTO AUXILIARY BEARINGS.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 2019
• PRESWIRL AND MIXED-FLOW (MAINLY-LIQUID) EFFECTS ON ROTORDYNAMIC PERFORMANCE OF A LONG (L/D=0.75) SMOOTH SEAL.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 2019
• COMPARISON OF MODEL PREDICTIONS AND PERFORMANCE TEST DATA FOR A PROTOTYPE THERMAL ENERGY STORAGE MODULE 2019
• A Capacity Planning Model for Microgrids in Rural India 2019
• A Decision Support Tool for Distributed Solar and Storage Investments: A Case Study in Austin, TX 2019
• A Model Science-Based Learning STEM Program 2019
• A PROJECT-BASED LEARNING STEM PROGRAM FOR MIDDLE AND HIGH SCHOOL STUDENTS.  v005t07a039-v005t07a039. 2019
• BINDER JETTING ADDITIVE MANUFACTURING OF CERAMICS: ANALYTICAL AND NUMERICAL MODELS FOR POWDER SPREADING PROCESS 2019
• BINDER JETTING ADDITIVE MANUFACTURING OF CERAMICS: COMPARISON OF FLOWABILITY AND SINTERABILITY BETWEEN RAW AND GRANULATED POWDERS 2019
• BINDER JETTING ADDITIVE MANUFACTURING OF CERAMICS: FEEDSTOCK POWDER PREPARATION BY SPRAY FREEZE GRANULATION 2019
• BINDER JETTING ADDITIVE MANUFACTURING OF METALS: A LITERATURE REVIEW 2019
• HIGH TEMPERATURE MAGNETIC THRUST BEARING: THEORY AND EXPERIMENT 2019
• MULTIPHASE FLOW DISTRIBUTION IN MQL DRILLING USING OPTICAL INTENSITY DISTRIBUTION BASED APPROACH 2019
• NUCLEATION AND BOUNDARY LAYER GROWTH OF SHEAR BANDS IN MACHINING 2019
• ON THE TEMPORAL NETWORK ANALYSIS WITH LINK PREDICTION.  v04bt06a032-v04bt06a032. 2019
• REDUCED-ORDER MODEL OF UNSTEADY FLOWS IN A TURBOMACHINERY FAN MODELED USING A NOVEL PROPER ORTHOGONAL DECOMPOSITION 2019
• SPRAY CHARACTERISTICS OF ALTERNATIVE JET FUEL AT ELEVATED AMBIENT CONDITIONS 2019
• STATIC STIFFNESS MEASUREMENTS FOR A THRUST COLLAR USED IN AN INTEGRALLY GEARED COMPRESSOR 2019
• Sub-Optimal Control of Autonomous Wheel Loader With Approximate Dynamic Programming 2019
• Sub-Optimal Tracking in Switched Systems With Controlled Subsystems and Fixed-Mode Sequence Using Approximate Dynamic Programming 2019
• WASTE REDUCTION: A REVIEW OF COMMON OPTIONS AND ALTERNATIVES 2019
• A STUDY FOR ROTORDYNAMIC AND LEAKAGE CHARACTERISTICS OF A LONG-HONEYCOMB SEAL WITH TWO-PHASE, MAINLY AIR MIXTURES.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 2019
• A STUDY ON THE LEAKAGE AND ROTORDYNAMIC COEFFICIENTS OF A LONG-SMOOTH SEAL WITH LAMINAR-TWO-PHASE, MAINLY-OIL MIXTURES.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 2019
• EXPERIMENTAL INVESTIGATIONS OF A COMB-LIKE FILM COOLING SCHEME.  311-320. 2019
• LAMINAR FLAME SPEED EXPERIMENTS OF ALTERNATIVE LIQUID FUELS.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 2019
• Leakage and Force Coefficients of a Grooved Wet (Bubbly Liquid) Seal for Multiphase Pumps and Comparisons with Prior Test Results for a Three Wave Seal.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 2019
• DESIGN AND FABRICATION OF A NOVEL AUTONOMOUS PIPELINE SCANNING ROBOT.  v014t07a020-v014t07a020. 2018
• DESIGN AND POTENTIAL APPLICATION OF SMALL SCALE WAVE ENERGY CONVERTER.  v006t08a084-v006t08a084. 2018
• NUMERICAL MODELING OF CRACK PROPAGATION IN HUMAN AORTA.  v003t04a084-v003t04a084. 2018
• ON THE DYNAMICS OF COMPLEX NETWORK.  v04bt05a028-v04bt05a028. 2018
• STATICS AND DYNAMICS OF AN AORTIC SEGMENT CONSIDERING RESIDUAL STRESSES.  v003t04a082-v003t04a082. 2018
• THE EFFECT OF FIBER CLUSTERS AND VOIDS ON THE COALESCENCE OF DEBONDS IN POLYMER MATRIX COMPOSITES.  v009t12a049-v009t12a049. 2018
• FILM COOLING EFFECTIVENESS COMPARISON ON TURBINE VANE ENDWALL WITH CLUSTER CONFIGURATIONS USING PSP MEASUREMENT TECHNIQUE.  v008t10a039-v008t10a039. 2018
• CONTROL DESIGN FOR THE SYSTEM OF MANIPULATOR HANDLING A FLEXIBLE PAYLOAD WITH INPUT CONSTRAINTS.  Proceedings of the ASME Dynamic Systems and Control Conference. ASME Dynamic Systems and Control Conference. v003t40a004-v003t40a004. 2018
• DESIGN OF A PERIODIC EVENT-BASED REPETITIVE CONTROLLER WITH DYNAMIC OUTPUT FEEDBACK FOR LINEAR SYSTEMS.  Proceedings of the ASME Dynamic Systems and Control Conference. ASME Dynamic Systems and Control Conference. v003t30a009-v003t30a009. 2018
• NUMERICAL EVALUATION OF PRESSURE DROP ACROSS ORIFICES FOR DIFFERENT GAS-LIQUID MIXTURES.  Proceedings of the ASME Dynamic Systems and Control Conference. ASME Dynamic Systems and Control Conference. v003t30a007-v003t30a007. 2018
• A TAILORED NONLINEAR SLAT-COVE FILLER FOR AIRFRAME NOISE REDUCTION.  v001t03a017-v001t03a017. 2018
• COMPARISON OF FRACTURE MODELS TO QUANTIFY THE EFFECTS OF MATERIAL PLASTICITY ON THE DUCTILE FRACTURE PROPAGATION IN PIPELINES.  v003t05a005-v003t05a005. 2018
• CRACK GROWTH BEHAVIOR IN NITI SHAPE MEMORY ALLOYS UNDER MODE-I ISOTHERMAL LOADING: EFFECT OF STRESS STATE.  v002t02a013-v002t02a013. 2018
• Data-Driven Modeling Techniques to Estimate Dispersion Relations of Structural Components.  v001t03a026-v001t03a026. 2018
• Investigation of Elastic Meta-Structures With Periodic Localized Stress-Fields.  v001t03a030-v001t03a030. 2018
• PLANE STRAIN SLIDING CONTACT BETWEEN A RIGID CYLINDER AND A PSEUDOELASTIC SHAPE MEMORY ALLOY HALF-SPACE.  v002t02a015-v002t02a015. 2018
• Piezoelectric Vibration Control of a Sandwich Beam With Tip Mass.  v001t03a024-v001t03a024. 2018
• SHUTTERED PASSIVE INFRARED SENSOR FOR OCCUPANCY DETECTION: EXPLORING A LOW POWER ELECTRO-MECHANICAL DRIVING APPROACH.  v002t05a010-v002t05a010. 2018
• TOWARDS HIGH TURNDOWN RATIO SHAPE MEMORY ALLOY-DRIVEN MORPHING RADIATORS.  v002t02a009-v002t02a009. 2018
• Traveling Waves As a De-Powdering Process for Additively Manufactured Parts.  v001t04a022-v001t04a022. 2018
• Manufacturability Constraint Formulation for Design Under Hybrid Additive-Subtractive Manufacturing.  v004t05a011-v004t05a011. 2018
• L-SYSTEM-GENERATED TOPOLOGY OPTIMIZATION OF COMPLIANT MECHANISMS USING GRAPH-BASED INTERPRETATION.  v05bt07a001-v05bt07a001. 2018
• A Simplified Numerical Benchmark for Pool-Type Sodium Fast Reactors.  v004t15a018-v004t15a018. 2018
• CFD-Based Correlation for Forced Convection Heat Transfer in Circular Ducts of Internally Heated Molten Salts.  v06bt08a062-v06bt08a062. 2018
• Creation of an OpenFOAM Fuel Performance Class Based on FRED and Integration Into the GeN-Foam Multi-Physics Code.  v003t02a027-v003t02a027. 2018
• First Steps Towards the Development of a 3D Nuclear Fuel Behavior Solver With OpenFOAM.  v003t02a051-v003t02a051. 2018
• LARGE EDDY SIMULATION OF 5-TUBE BUNDLE HELICAL COIL STEAM GENERATOR TEST SECTION.  v008t09a043-v008t09a043. 2018
• OPTIMIZATION OF FUEL STORAGE IN SPENT FUEL POOL.  v009t16a006-v009t16a006. 2018
• PARTIALLY AVERAGED NAVIER-STOKES TURBULENCE MODELING OF FLOW IN 5X5 PWR FUEL ASSEMBLY WITH SPACER GRID.  v008t09a041-v008t09a041. 2018
• RCIC Turbo-Pump Scaling Through CFD and Model Testing for the Texas A&M University NHTS Facility.  v009t16a008-v009t16a008. 2018
• THE INFLUENCE OF PEBBLE PLACEMENT ON THE WAKE OF TANDEM PEBBLES IN A FREE STREAM.  v009t16a061-v009t16a061. 2018
• TIME-RESOLVED VELOCITY MEASUREMENTS IN A MATCHED REFRACTIVE INDEX FACILITY OF RANDOMLY PACKED SPHERES.  v06bt08a058-v06bt08a058. 2018
• TURBULENT TRANSVERSE PLANE PIV MEASUREMENTS ON A WIRE-WRAPPED 61-PIN HEXAGONAL FUEL BUNDLE.  v06at08a043-v06at08a043. 2018
• ANALYSIS OF PRESSURE FIELD ON WIRE-WRAPPED PIN BUNDLE SURFACE FOR CONCERNS OF FSI.  Proceedings of the ASME Fluids Engineering Division Summer Meeting. v001t08a008-v001t08a008. 2018
• ASSESSMENT OF RANS, LES, AND HYBRID RANS/LES MODELS FOR THE PREDICTION OF LOW-PR TURBULENT FLOWS.  Proceedings of the ASME Fluids Engineering Division Summer Meeting. v001t08a005-v001t08a005. 2018
• TWO-PHASE FLOW VISUALIZATION FOR A HYBRID HEAT SINK.  Proceedings of the ASME Fluids Engineering Division Summer Meeting. v003t19a005-v003t19a005. 2018
• AN EXPERIMENTAL STUDY OF WEDGE INDENTATION OF POROUS SOLIDS: IMPLICATIONS FOR CUTTING AND DRILLING PROCESSES.  v002t04a030-v002t04a030. 2018
• ROBOTIC SURFACE FINISHING OF CURVED SURFACES: REAL-TIME IDENTIFICATION OF SURFACE PROFILE AND CONTROL.  v003t02a045-v003t02a045. 2018
• NOx-Hydrocarbon Kinetics Model Validation Using Measurements of H2O in Shock-Heated CH4/C2H6 Mixtures With NO2 As Oxidant.  v04at04a062-v04at04a062. 2018
• STATIC AND DYNAMIC COEFFICIENT MEASUREMENTS FOR A THRUST COLLAR USED IN AN INTEGRALLY GEARED COMPRESSOR.  v07bt34a011-v07bt34a011. 2018
• A Numerical Study on Reducing the Stator Blade Surface Temperature in the Ultra-High Efficiency Gas Turbine Engine by Indexing Fuel Injectors and Using Film Cooling.  v003t06a007-v003t06a007. 2018
• Effects of Streamwise Distance and Density Ratio on Film-Cooling Effectiveness for Double-Jet Film-Cooling on a Flat Plate.  v05ct19a010-v05ct19a010. 2018
• Impact of Turbine Blade Stagger Angle Adjustment On the Efficiency and Performance of Gas Turbines During Off-Design and Dynamic Operation.  v001t01a020-v001t01a020. 2018
• PROCESSING-MECHANICAL PROPERTY RELATIONSHIP OF HOLLOW AND POROUS CARBON FIBERS FABRICATED BY COAXIAL ELECTROSPINNING.  v002t04a016-v002t04a016. 2018
• Smart Manufacturing: State-of-the-Art Review in Context of Conventional and Modern Manufacturing Process Modeling, Monitoring and Control.  v003t02a008-v003t02a008. 2018
• Thermal Response of Open-Cell Porous Materials: A Numerical Study and Model Assessment.  v001t03a002-v001t03a002. 2018
• NOX-HYDROCARBON KINETICS MODEL VALIDATION USING MEASUREMENTS OF H2O IN SHOCK-HEATED CH4/C2H6 MIXTURES WITH NO2 AS OXIDANT.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 2018
• 3D PRINTING OF MEDICAL MODELS: A LITERATURE REVIEW.  v014t07a005-v014t07a005. 2018
• A STUDY OF NEGATIVE DAMPING IN FLOATING WIND TURBINES USING COUPLED PROGRAM FAST-SIMDYN.  v001t01a036-v001t01a036. 2018
• A THEORETICAL LOOK AT THE IMPACT OF INCENTIVES ON DESIGN PROBLEM EFFORT PROVISION.  v007t06a030-v007t06a030. 2018
• ADDITIVE MANUFACTURING OF NICKEL-BASED SUPERALLOYS.  v001t01a015-v001t01a015. 2018
• AERODYNAMIC AND STRUCTURAL EVALUATION OF AN SMA SLAT-COVE FILLER USING COMPUTATIONAL AND EXPERIMENTAL TOOLS AT MODEL SCALE.  v001t04a019-v001t04a019. 2018
• ALGORITHMS FOR LOCALIZATION AND ROUTING OF UNMANNED VEHICLES IN GPS-DENIED ENVIRONMENTS.  Proceedings of the ASME Dynamic Systems and Control Conference. ASME Dynamic Systems and Control Conference. v003t32a001-v003t32a001. 2018
• BINDER JETTING ADDITIVE MANUFACTURING OF CERAMICS: A LITERATURE REVIEW.  v014t07a006-v014t07a006. 2018
• CARBON DIOXIDE AND WATER MIXTURE IN PIPELINE FLOW SYSTEMS.  International Conference on Ocean Offshore and Arctic Engineering. v008t11a011-v008t11a011. 2018
• CERAMIC ADDITIVE MANUFACTURING USING VAT PHOTOPOLYMERIZATION.  v001t01a003-v001t01a003. 2018
• CFD Numerical Simulation for Downhole Thruster Performance Evaluation.  International Conference on Ocean Offshore and Arctic Engineering. v008t11a016-v008t11a016. 2018
• CFD and Experimental Studies of Yield Power-Law Fluids in Turbulent Pipe Flow.  International Conference on Ocean Offshore and Arctic Engineering. v008t11a012-v008t11a012. 2018
• COMPLIANT HYBRID GAS BEARING USING MODULAR HERMETICALLY-SEALED SQUEEZE FILM DAMPERS.  v07bt34a036-v07bt34a036. 2018
• DYNAMIC CHARACTERIZATION OF A NOVEL EXTERNALLY PRESSURIZED COMPLIANTLY DAMPED GAS-LUBRICATED BEARING WITH HERMETICALLY SEALED SQUEEZE FILM DAMPER MODULES.  v07bt34a050-v07bt34a050. 2018
• EXPERIMENTAL VALIDATION OF NEO-HOOKEAN FIBER REINFORCED ELASTIC SOLIDS.  v001t01a019-v001t01a019. 2018
• GENERATING TECHNOLOGY EVOLUTION PREDICTION INTERVALS WITH BOOTSTRAP METHOD.  v007t06a057-v007t06a057. 2018
• GREEN WATER FLOW ON A FIXED MODEL STRUCTURE IN A LARGE WAVE BASIN UNDER RANDOM WAVES.  International Conference on Ocean Offshore and Arctic Engineering. v07bt06a018-v07bt06a018. 2018
• HERMETICALLY SEALED SQUEEZE FILM DAMPER FOR OPERATION IN OIL-FREE ENVIRONMENTS.  v07bt34a035-v07bt34a035. 2018
• How Solar and Storage Can Reduce Coincident Peak Loads and Payments: A Case Study in Austin, TX.  v06bt08a023-v06bt08a023. 2018
• IMPLEMENTING THE TRANSFORMATION OF DISCRETE PART MANUFACTURING SYSTEMS INTO SMART MANUFACTURING PLATFORMS.  v003t02a009-v003t02a009. 2018
• MODEL GUIDED MIXING OF CERAMIC POWDERS WITH GRADED PARTICLE SIZES IN BINDER JETTING ADDITIVE MANUFACTURING.  v001t01a014-v001t01a014. 2018
• MULTIPHASE FLOW IN A SUBSEA HILLY TERRAIN.  International Conference on Ocean Offshore and Arctic Engineering. v008t11a009-v008t11a009. 2018
• NICKEL/ALUMINA METAL MATRIX NANOCOMPOSITES OBTAINED BY HIGH-ENERGY BALL MILLING AND SPARK PLASMA SINTERING.  v002t04a003-v002t04a003. 2018
• Numerical Investigation Into the Keying Process of a Plate Anchor Vertically Installed in Cohesionless Soil.  v009t10a008-v009t10a008. 2018
• PREPARATION OF METAL NANOCOMPOSITE POWDER USING ELECTROLESS PLATING.  v002t04a004-v002t04a004. 2018
• PROMOTING LIFE-LONG LEARNING SKILLS IN CAD USING THE PEER-GENERATED SCREENCAST TUTORIALS.  v005t06a018-v005t06a018. 2018
• Precision Cutting Tool Wear Monitoring Method by Knife-Edge Diffraction Interferometry.  v003t02a026-v003t02a026. 2018
• ROTARY ULTRASONIC MACHINING OF CFRP: EFFECTS OF ABRASIVE PROPERTIES.  v004t03a060-v004t03a060. 2018
• Spray Performance of Alternative Jet Fuel Based Nanofuels at High-Ambient Conditions.  v007t09a062-v007t09a062. 2018
• Template-Free Fabrication of Aligned Nanoarray for Quantifying the Nanosurface-Single Cells Interaction.  v001t05a014-v001t05a014. 2018
• UNDERSTANDING ECOLOGICAL EFFICIENCY AND ROBUSTNESS FOR NETWORK DESIGN USING THERMODYNAMIC POWER CYCLES.  v007t06a053-v007t06a053. 2018
• VISCOUS SHEAR BANDING IN CUTTING OF METALS.  v002t04a032-v002t04a032. 2018
• SHELLSIDE VACUUM CONDENSATION WITH A NONCONDENSABLE GAS.  v008t10a009-v008t10a009. 2017
• A Comparative Study of Mass Based Vibration Dampers.  v04at05a045-v04at05a045. 2017
• AN EXPERIMENTAL STUDY OF BI-DIRECTIONAL STRUCTURE VIBRATION SUPPRESSION USING LPC IMPACT DAMPERS.  v002t22a003-v002t22a003. 2017
• AN APPROXIMATION ALGORITHM FOR A SHORTEST DUBINS PATH PROBLEM.  v002t24a007-v002t24a007. 2017
• Air-Fuel Ratio Control of Lean-Burn SI Engines Using Fuzzy Sliding-Mode Technique.  v001t09a004-v001t09a004. 2017
• Using Sensing Coils to Detect and Correct Lateral Misalignments in an Inductive Power-Transfer Wireless Charging System.  v002t18a001-v002t18a001. 2017
• A Novel Chopped Pyroelectric Infrared Sensor for Detecting the Presence of Stationary and Moving Occupants.  v002t05a006-v002t05a006. 2017
• A Sensor Fusion Based Pan-Tilt Platform for Activity Tracking and Fall Detection.  v002t05a005-v002t05a005. 2017
• A Stabilization of Fixed Gain Controlled Infinite Dimensional Systems by Augmentation With Direct Adaptive Control.  v002t03a003-v002t03a003. 2017
• Acoustoelastic-Based Stress Measurement Utilizing Low-Frequency Flexural Waves.  v002t05a004-v002t05a004. 2017
• Internal Porosity Detection in Additively Manufactured Parts via Electromechanical Impedance Measurements.  v001t08a009-v001t08a009. 2017
• APPLICATION OF THE POD METHOD FOR CRACKED ROTORS.  Proceedings of the ASME Design Engineering Technical Conferences. v006t10a055-v006t10a055. 2017
• DESIGN OPTIMIZATION OF FOLDING SOLAR POWERED AUTONOMOUS UNDERWATER VEHICLES USING ORIGAMI ARCHITECTURE.  Proceedings of the ASME Design Engineering Technical Conferences. v05bt08a048-v05bt08a048. 2017
• EFFECT OF UNBALANCE FORCE DIRECTION ON A CRACKED ROTOR WHIRL RESPONSE.  Proceedings of the ASME Design Engineering Technical Conferences. v006t10a056-v006t10a056. 2017
• ANALYSIS AND DESIGN OF AN ACTIVE SELF-FOLDING ANTENNA.  Proceedings of the ASME Design Engineering Technical Conferences. v05bt08a049-v05bt08a049. 2017
• AUTOMATED GRAPH GRAMMAR GENERATION FOR ENGINEERING DESIGN WITH FREQUENT PATTERN MINING.  Proceedings of the ASME Design Engineering Technical Conferences. v02at03a006-v02at03a006. 2017
• DEVELOPMENT OF A KEYWORD SEARCH ALGORITHM FOR BIOINSPIRED DESIGN OF FOLDABLE ENGINEERING APPLICATIONS.  Proceedings of the ASME Design Engineering Technical Conferences. v05bt08a053-v05bt08a053. 2017
• PRODUCT PERFORMANCE EVOLUTION PREDICTION BY LOTKA-VOLTERRA EQUATIONS.  Proceedings of the ASME Design Engineering Technical Conferences. v007t06a014-v007t06a014. 2017
• Comparison of Turbulent Jets Issuing from Various Sharp Contoured Nozzles.  v01ct23a016-v01ct23a016. 2017
• Computational Assessment of Double-Inlet Collector in Solar Chimney Power Plant Systems.  v01bt08a006-v01bt08a006. 2017
• Experimental-Numerical Analysis of Turbulent Incompressible Isothermal Jets.  v01ct23a015-v01ct23a015. 2017
• INVESTIGATION OF THE DYNAMICS OF INCOMPRESSIBLE FLOW IN DOMAINS OF MULTIPLE CLOSE-PACKED SPHERES.  ASME -Publications- Fed. v01bt12a007-v01bt12a007. 2017
• LARGE EDDY SIMULATION OF A HELICAL COIL STEAM GENERATOR TEST SECTION.  ASME -Publications- Fed. v01bt12a003-v01bt12a003. 2017
• SIMULATION OF FLUID-STRUCTURE INTERACTION OF CROSSFLOW THROUGH A TUBE BUNDLE AND EXPERIMENTAL VALIDATION.  ASME -Publications- Fed. v01bt11a019-v01bt11a019. 2017
• Terry Turbopump Expanded Operating Band.  v001t01a002-v001t01a002. 2017
• ANALYSIS OF FILM COOLING WITH HIGH-ASPECT-RATIO HOLES: HEAT TRANSFER MECHANISMS.  v001t01a002-v001t01a002. 2017
• EXPERIMENTAL STUDY OF A SINGLE MICROCHANNEL FLOW UNDER NON-UNIFORM HEAT FLUX.  v002t14a006-v002t14a006. 2017
• GRAPHICAL MATERIAL SELECTION METHODS FOR MULTI-CONSTRAINT, MULTI-FUNCTIONAL COMPOSITES PRESSURE VESSELS.  ASME -Publications- Pvp. v06at06a058-v06at06a058. 2017
• Dynamic Characterization of an Integral Squeeze Film Bearing Support Damper for a Supercritical CO2 Expander.  v07at34a009-v07at34a009. 2017
• A Computational Fluid Dynamics Modified Bulk Flow Analysis for Circumferentially Shallow Grooved Liquid Seals.  v07at34a011-v07at34a011. 2017
• A Flow Starvation Model for Tilting Pad Journal Bearings and Evaluation of Frequency Response Functions: A Contribution Towards Understanding the Onset of Low Frequency Shaft Motions.  v07at34a030-v07at34a030. 2017
• CHARACTERIZATION OF AN ELECTRODYNAMIC DUST SHIELD DEVICE FOR PV PANEL SOILING MITIGATION.  v001t08a001-v001t08a001. 2017
• CO and H2O Time-Histories in Shock-Heated Blends of Methane and Ethane for Assessment of a Chemical Kinetics Model.  v04bt04a059-v04bt04a059. 2017
• Data-Driven Thermal Comfort Prediction With Support Vector Machine.  v003t04a044-v003t04a044. 2017
• Effect of Density Ratio on Film-Cooling Effectiveness Distribution and its Uniformity for Several Hole Geometries on a Flat Plate.  v05ct19a012-v05ct19a012. 2017
• Effect of Flow Acceleration on Mainstream-to-Coolant Flow Interaction for Round and Shaped Film Cooling Holes.  v05ct19a013-v05ct19a013. 2017
• Experimental and Numerical Investigation of Heat Transfer and Film Cooling Effectiveness of a Highly Loaded Turbine Blade Under Steady and Unsteady Wake Flow Condition.  v05ct19a029-v05ct19a029. 2017
• Film Cooling Effectiveness Comparison on Full-Scale Turbine Vane Endwalls Using PSP Technique.  v05ct19a028-v05ct19a028. 2017
• INVESTIGATION OF AERODYNAMICS AND HEAT TRANSFER OF A HIGHLY LOADED TURBINE BLADE USING THE UNIVERSAL INTERMITTENCY FUNCTION.  v02dt46a030-v02dt46a030. 2017
• Influence of Turbine Blade Leading Edge Profile on Film Cooling With Shaped Holes.  v05ct19a010-v05ct19a010. 2017
• Interaction of Flow and Film-Cooling Effectiveness Between Double-Jet Film-Cooling Holes With Various Spanwise Distances.  v05ct19a011-v05ct19a011. 2017
• Leakage, Drag Power and Rotordynamic Force Coefficients of an Air in Oil (Wet) Annular Seal.  v07at34a004-v07at34a004. 2017
• NUMERICAL SIMULATION OF THE MULTISTAGE ULTRA-HIGH EFFICIENCY GAS TURBINE ENGINE, UHEGT.  v003t06a034-v003t06a034. 2017
• On the Force Coefficients of a Flooded, Open Ends Short Length Squeeze Film Damper: From Theory to Practice (and Back).  v07at34a003-v07at34a003. 2017
• Powder-Based Additive Manufacturing of Li-Ion Batteries and Micropowder Mixing Characteristics.  v002t01a028-v002t01a028. 2017
• Simulation Model of Automated HVAC System Control Strategy With Thermal Comfort and Occupancy Considerations.  v003t04a003-v003t04a003. 2017
• TURBINE BLADE LEADING EDGE COOLING WITH ONE ROW OF NORMAL OR TANGENTIAL IMPINGING JETS.  v05at16a007-v05at16a007. 2017
• Transonic Turbine Vane Suction Side Film Cooling With Showerhead Effect Using PSP Measurement Technique.  v05ct19a002-v05ct19a002. 2017
• Transport and Interfacial Phenomena in Nanoscale Confined Laser Crystallization.  v003t04a073-v003t04a073. 2017
• Turbine Blade Platform Film Cooling With Fan-Shaped Holes Under Simulated Swirl Purge Flow and Slashface Leakage Conditions.  v05ct19a001-v05ct19a001. 2017
• Turbine Vane Endwall Film Cooling From Cross-Row Configuration With Simulated Upstream Leakage Flow.  v05ct19a004-v05ct19a004. 2017
• Turbine Vane Endwall Film Cooling Study From Axial-Row Configuration With Simulated Upstream Leakage Flow.  v05ct19a003-v05ct19a003. 2017
• A COMPUTATIONALLY EFFICIENT OPTIMAL POWER MANAGEMENT FOR POWER SPLIT HYBRID VEHICLE BASED ON PONTRYAGIN'S MINIMUM PRINCIPLE.  v002t17a008-v002t17a008. 2017
• A Generalized Approach for Commercial and Industrial Load Shifting Control.  v003t42a002-v003t42a002. 2017
• A NUMERICAL STUDY ON CRACK GROWTH RESISTANCE CURVE OF X70 STEELS.  ASME -Publications- Pvp. v06bt06a048-v06bt06a048. 2017
• A Vascular Access Port for Dialysis With a Polyurethane Foam Seal: A Pilot Study.  v001t11a005-v001t11a005. 2017
• CFD SIMULATION OF THREE PHASE GAS-LIQUID-SOLID FLOW IN HORIZONTAL PIPES.  ASME -Publications- Fed. v01ct16a001-v01ct16a001. 2017
• COLLISION CONE BASED LANE CHANGING MODEL FOR COLLISION AVOIDANCE.  v003t33a002-v003t33a002. 2017
• Coolant Channel and Flow Characteristics of MQL Drill Bits: Experimental and Numerical Analyses.  v002t03a031-v002t03a031. 2017
• DESIGNING SUSTAINABLE MANUFACTURING NETWORKS: THE ROLE OF EXCLUSIVE SPECIES IN ACHIEVING ECOSYSTEM-TYPE CYCLING.  Proceedings of the ASME Design Engineering Technical Conferences. v004t05a044-v004t05a044. 2017
• DEVELOPMENT OF AN EMERGENCY LANE CHANGE SYSTEM IN HIGHWAY DRIVING.  v002t31a003-v002t31a003. 2017
• DYNAMIC RESPONSE OF 3D-PRINTED BI-MATERIAL STRUCTURE USING DROP WEIGHT IMPACT TEST.  v002t01a021-v002t01a021. 2017
• ESTIMATING ZONAL FLOW CONTRIBUTIONS IN DEEP WATER ASSETS FROM PRESSURE AND TEMPERATURE DATA.  v008t11a055-v008t11a055. 2017
• EVALUATION OF GRADE CROSSING HAZARD RANKING MODELS.  v001t06a009-v001t06a009. 2017
• FREQUENCY DOMAIN ANALYSIS OF THE INTERACTIONS BETWEEN MULTIPLE SHIPS WITH NONZERO SPEED IN WAVES OR CURRENT-WAVE INTERACTIONS.  v07at06a069-v07at06a069. 2017
• IMPROVEMENT ON THE ACCURACY OF MEAN DRIFT FORCE CALCULATION.  v07at06a068-v07at06a068. 2017
• INVESTIGATION OF PRESSURE LOSSES IN ECCENTRIC INCLINED ANNULI.  v008t11a018-v008t11a018. 2017
• LEVERAGING LOGGED INTERMEDIATE DESIGN ATTRIBUTES FOR IMPROVED KNOWLEDGE DISCOVERY IN ENGINEERING DESIGN.  Proceedings of the ASME Design Engineering Technical Conferences. v02at03a014-v02at03a014. 2017
• Model-Based Dynamic Control of Active Thermal Management System.  v008t10a060-v008t10a060. 2017
• NONLINEAR AND DISSIPATIVE CHARACTERISTICS OF A COMBINED RANDOM - CNOIDAL WAVE FIELD.  v07at06a037-v07at06a037. 2017
• OPTIMIZATION OF A FORWARD-SWEPT COMPLIANT MECHANISM.  v001t06a011-v001t06a011. 2017
• OPTIMIZATION OF STABILITY DISTRIBUTED CONTACT-AIDED COMPLIANT MECHANISMS IN A DYNAMIC STRUCTURE.  v001t06a010-v001t06a010. 2017
• PERFORMANCE MEASUREMENT AND QUALITY ASSURANCE APPLICATIONS FOR PASSENGER RAIL PLANNING.  v001t05a002-v001t05a002. 2017
• Synthesis and Characterization of Radiopaque Shape Memory Polymers.  v001t01a012-v001t01a012. 2017
• TRANSONIC FAN PERFORMANCE EVALUATED WITH DIFFERENT SOLUTION LIMITERS.  v02bt41a054-v02bt41a054. 2017
• TWO PHASE ANNULAR FLOW APPROXIMATION USING 1-D FLOW EQUATIONS COUPLED WITH A DRIFT FLUX MODEL FOR CONCURRENT FLOW IN VERTICAL OR NEAR VERTICAL CHANNELS.  v05at04a048-v05at04a048. 2017
• Thermodynamic Considerations Related to Knock: Results from an Engine Cycle Simulation.  v001t03a025-v001t03a025. 2017
• AERO-THERMAL SHAPE OPTIMIZATION FOR THE DISCRETE FILM COOLING OF A TURBINE AIRFOIL.  v08bt10a020-v08bt10a020. 2016
• ANALYSIS OF FORMATION OF THE CRITICAL STATE IN TENSILE FAILURE OF UNIDIRECTIONAL COMPOSITES.  v009t12a031-v009t12a031. 2016
• CHARACTERIZATION OF MICROMIST FOR EFFECTIVE MACHINING.  v02at02a058-v02at02a058. 2016
• EXAMINING ADAPTIVE EXPERTISE: A NOVEL COMPARISON OF STUDENT AND PRACTICING ENGINEER CAD MODELING PERFORMANCE.  v005t05a007-v005t05a007. 2016
• ORIGAMIBOT-II: AN AMPHIBIOUS ROBOT WITH RECONFIGURABLE ORIGAMI WHEELS FOR LOCOMOTION IN DYNAMIC ENVIRONMENTS.  v04at04a026-v04at04a026. 2016
• ROBUST ANTI-SWING ADAPTIVE FUZZY TRACKING CONTROL FOR TOWER CRANE SYSTEMS WITH BOTH DEAD-ZONE BAND AND TIME-DELAYS UNCERTAINTIES.  v04at04a020-v04at04a020. 2016
• Strain Localization in Determining the Constitutive Response of Polymers.  v014t11a040-v014t11a040. 2016
• COMBUSTION CHARACTERISTICS OF A 2-STROKE LARGE BORE NATURAL GAS SPARK-IGNITED ENGINE.  v001t01a002-v001t01a002. 2016
• COMBUSTION TRAJECTORY VISUALIZATION MODEL FOR STUDY OF CONVENTIONAL AND ADVANCED DIRECT INJECTION COMBUSTION MODES.  v001t03a004-v001t03a004. 2016
• Heat Transfer Characteristics of Conventional and High Efficiency IC Engines Using External or Internal Exhaust Gas Dilution.  v001t03a002-v001t03a002. 2016
• Zero dimensional quasi-predictive thermodynamic simulation for establishing initial cylinder conditions for CFD simulation of diesel combustion.  v002t06a020-v002t06a020. 2016
• A Base Study to Investigate MASH Conservativeness of Occupant Risk Evaluation.  v012t16a014-v012t16a014. 2016
• AN EXPERIMENTAL AND NUMERICAL STUDY OF SHAPE MEMORY ALLOY-BASED TENSEGRITY/ORIGAMI STRUCTURES.  v009t12a064-v009t12a064. 2016
• UNUSUAL HEAT TRANSFER CHARACTERISTICS OF SUPERCRITICAL CARBON DIOXIDE.  v08at10a040-v08at10a040. 2016
• A PREDICTIVE STRATEGY TO CONTROL TIME-VARYING DELAY SYSTEMS: LEAN-BURN ENGINES.  v003t46a004-v003t46a004. 2016
• A NONLINEAR TENSION CONTROL SCHEME FOR WEB TRANSPORT THROUGH HEATING PROCESSES.  v002t32a006-v002t32a006. 2016
• Development of a Mobile Robot Providing a Natural Way to Interact With Electronic Devices.  v001t03a003-v001t03a003. 2016
• Energy Harvesting and Damping Capability of Quarter-Car Test Bed.  v001t13a002-v001t13a002. 2016
• SPEED CONTROL OF AN INERTIA LOAD CONNECTED TO A MOTOR THROUGH A COMPLIANT MECHANICAL TRANSMISSION SYSTEM.  v003t40a003-v003t40a003. 2016
• TOWARD MATERIAL PARAMETERS FOR MODELING DEVICES MADE FROM AN EPDXY-BASED SHAPE MEMORY POLYMER.  v001t01a018-v001t01a018. 2016
• UNDERSTANDING THE RELATIONSHIP BETWEEN PITCH AGILITY AND PROPULSIVE AERODYNAMIC FORCES IN BIO-INSPIRED FLAPPING WING VEHICLES.  v002t06a001-v002t06a001. 2016
• Adaptive Tracking Control for Linear Infinite Dimensional Systems.  v002t03a009-v002t03a009. 2016
• COMPUTATIONALLY EFFICIENT ANALYSIS OF SMA SENSORY PARTICLES EMBEDDED IN COMPLEX AEROSTRUCTURES USING A SUBSTRUCTURE APPROACH.  v001t02a007-v001t02a007. 2016
• Engineering Design Tools for Shape Memory Alloy Actuators: CASMART Collaborative Best Practices and Case Studies.  v001t04a010-v001t04a010. 2016
• Synchronized Switch Harvesting on Inductor Interface to Promote Piezoelectric Stack Energy Harvesting From Human Walking.  v002t07a016-v002t07a016. 2016
• Systematic Design of a Piezo-Electric Stack Energy Harvester From Walking Locomotion.  v001t04a015-v001t04a015. 2016
• A Compressed Sensing Approach to Uncertainty Propagation for Approximately Additive Functions.  v01at02a027-v01at02a027. 2016
• ON THE THERMOMECHANICAL BEHAVIOR OF NI60TI40 COUPONS VIA HIGH PERFORMANCE FULL FIELD EXPERIMENTS.  v01at02a007-v01at02a007. 2016
• ECOLOGICAL ROBUSTNESS AS A DESIGN PRINCIPLE FOR SUSTAINABLE INDUSTRIAL SYSTEMS.  v004t05a047-v004t05a047. 2016
• AN ORIGAMI-INSPIRED, SMA ACTUATED LIFTING STRUCTURE.  v05bt07a024-v05bt07a024. 2016
• NUMERICAL INVESTIGATION OF HEAT TRANSFER CHARACTERISTICS OF A NOVEL WAVY-TAPERED MICROCHANNEL HEAT SINK.  v002t11a009-v002t11a009. 2016
• Loading-Unloading Cycles of 3D-Printing Built Bi-Material Structures With Ceramic and Elastomer.  v003t08a008-v003t08a008. 2016
• Modeling of Brittle and Ductile Materials Drilling Using Smoothed-Particle Hydrodynamics.  v002t03a013-v002t03a013. 2016
• CALCULATION OF TURBULENT KINETIC ENERGY BUDGETS FOR FLOW THROUGH A PEBBLE BED USING DNS.  v005t15a058-v005t15a058. 2016
• CFD INVESTIGATION OF WIRE-WRAPPED FUEL ROD BUNDLE INNER SUBCHANNEL BEHAVIOR AND DEPENDENCY ON BUNDLE SIZE.  v005t15a062-v005t15a062. 2016
• COMPUTATIONAL FLUID DYNAMICS ANALYSIS OF TWO PARALLEL RECTANGULAR JETS USING OPENFOAM.  v004t10a030-v004t10a030. 2016
• EXPERIMENTAL STUDY OF HELIX-FINNED SURFACE FOR NUCLEATE POOL BOILING.  v005t15a003-v005t15a003. 2016
• NUCLEAR SYSTEMS FOR A LOW CARBON ELECTRICAL GRID.  v001t03a007-v001t03a007. 2016
• TEMPERATURE MEASUREMENTS OF THERMAL STRATIFICATION AND TURBULENT MIXING IN NUCLEAR SYSTEMS WITH A SINGLE HEATED JET.  v005t15a061-v005t15a061. 2016
• APPLICATION OF S-PIV FOR INVESTIGATION OF ROUND AND SHAPED FILM COOLING HOLES AT HIGH DENSITY RATIOS.  v05ct19a008-v05ct19a008. 2016
• Combined Effects of Freestream Pressure Gradient and Density Ratio on the Film Cooling Effectiveness of Round and Shaped Holes on a Flat Plate.  v05ct19a009-v05ct19a009. 2016
• Full Coverage Film Cooling Performance for Combustor Cooling Manufactured Using DMLS.  v05bt17a005-v05bt17a005. 2016
• A Study of Anti-Rolling Tank on Floating Vessel.  v007t06a020-v007t06a020. 2016
• ASSESSMENT OF POWER CONSUMPTION OF AN ELECTRODYNAMIC DUST SHIELD TO CLEAN SOLAR PANELS.  v001t08a010-v001t08a010. 2016
• COMPARATIVE LIFT-OFF PERFORMANCE IN FLEXURE PIVOT PAD AND HYBRID (HYDROSTATIC AND HYDRODYNAMIC) BEARINGS WITH WATER AS THE TEST FLUID.  v07bt31a002-v07bt31a002. 2016
• Comparative Study of Wave Run-Up and Slamming Occurrence for Multi-Unit Floating Offshore Wind Turbine Platform: Numerical Simulation vs. Model Test.  v009t12a006-v009t12a006. 2016
• Experimental Investigation of Film Cooling Effectiveness of a Highly Loaded Turbine Blade Under Steady and Periodic Unsteady Flow Conditions.  v05ct19a015-v05ct19a015. 2016
• HEAT TRANSFER COEFFICIENTS AND FILM COOLING EFFECTIVENESS OF TRANSONIC TURBINE VANE SUCTION SURFACE USING TSP TECHNIQUE.  v05ct19a010-v05ct19a010. 2016
• MODELS FOR PREDICTION OF SOILING-CAUSED PHOTOVOLTAIC POWER OUTPUT DEGRADATION BASED ON ENVIRONMENTAL VARIABLES IN DOHA, QATAR.  v001t08a004-v001t08a004. 2016
• Numerical And Experimental Investigation of Aerodynamics On Flow Around A Highly Loaded Low-Pressure Turbine Blade with Flow Separation Under Steady And Periodic Unsteady Inlet Flow Condition.  v05at13a010-v05at13a010. 2016
• ROTATING MACHINERY MONITORING AND FAULT DIAGNOSIS WITH NEURAL NETWORK ENHANCED FUZZY LOGIC EXPERT SYSTEM.  v006t05a026-v006t05a026. 2016
• SOLID ELEMENT ROTORDYNAMIC MODELING OF A ROTOR ON A FLEXIBLE SUPPORT STRUCTURE UTILIZING MIMO SUPPORT TRANSFER FUNCTIONS.  v07at30a008-v07at30a008. 2016
• THE INFLUENCE OF HYDRODYNAMIC BEARING CONFIGURATION ON MORTON EFFECT.  v07bt31a017-v07bt31a017. 2016
• TURBINE BLADE PLATFORM FILM COOLING WITH SIMULATED SWIRL PURGE FLOW AND SLASHFACE LEAKAGE CONDITIONS.  v05ct19a012-v05ct19a012. 2016
• TURBINE VANE ENDWALL FILM COOLING WITH SLASHFACE LEAKAGE AND DISCRETE HOLE CONFIGURATION.  v05ct19a011-v05ct19a011. 2016
• Tracheal Cartilage Ring Biomechanical Properties for Pediatric Exostent Design.  Journal of Medical Devices. 020955. 2016
• A DETECTION AND WARNING SYSTEM FOR UNINTENDED ACCELERATION.  v002t31a002-v002t31a002. 2016
• A HYPERHEURISTIC APPROACH TO LEVERAGING DOMAIN KNOWLEDGE IN MULTI-OBJECTIVE EVOLUTIONARY ALGORITHMS.  343-352. 2016
• A UNIFORM CONTROL FOR TRACKING AND POINT STABILIZATION OF DIFFERENTIAL DRIVE ROBOTS SUBJECT TO HARD INPUT CONSTRAINTS.  v001t04a005-v001t04a005. 2016
• ANALYSIS AND OPTIMIZATION OF A SHAPE MEMORY ALLOY-BASED SELF-FOLDING SHEET CONSIDERING MATERIAL UNCERTAINTIES.  v001t01a013-v001t01a013. 2016
• ANALYSIS OF IN-PLANE COMPRESSION AND BENDING OF HONEYCOMBS WITH LAMINATED CELL WALLS.  v009t12a043-v009t12a043. 2016
• An Information-Theoretic Model of Project Schedule Overruns Caused by Task Rework: A Case for Newspeak.  v01bt02a022-v01bt02a022. 2016
• Bioinspired Materials Design: An Assessment of Methods to Improve a Text Mining Algorithm for Identifying Biological Material Structural Design Principles.  v007t06a001-v007t06a001. 2016
• CHARACTERIZATION OF FORCES IN HIGH-SPEED BONE CUTTING AND GRINDING FOR HAPTICS RENDERING.  v002t03a012-v002t03a012. 2016
• Characterization of Time-Averaged Turbulence Statistics for Shear Thinning Fluid in Horizontal Concentric Annulus Using RANS Based CFD Simulation.  v008t11a014-v008t11a014. 2016
• DESIGN OF ORIGAMI STRUCTURES WITH SMOOTH FOLDS.  v002t03a018-v002t03a018. 2016
• EFFECTIVE TUNING OF CASCADED CONTROL LOOPS FOR NONLINEAR HVAC SYSTEMS.  v002t29a002-v002t29a002. 2016
• ESTIMATION OF LOCATION AND ORIENTATION FROM RANGE MEASUREMENTS.  v002t31a005-v002t31a005. 2016
• EXPERIMENTAL AND NUMERICAL CHARACTERIZATION OF DROPLET-INDUCED SPREADING-SPLASHING TRANSITION IN SURFACE COOLING.  v002t08a013-v002t08a013. 2016
• EXPERIMENTAL CHARACTERIZATION AND MODELING OF CAPILLARY-PUMPED THIN-FILM EVAPORATION FROM MICROPILLAR WICKS.  v001t09a005-v001t09a005. 2016
• EXPERIMENTAL STUDY OF BREAKING WAVE IMPINGING AND OVERTOPPING A DECK STRUCTURE.  v007t06a037-v007t06a037. 2016
• EXPERIMENTAL VALIDATION OF COMPLIANT JOINTS IN A DYNAMIC SPAR NUMERICAL MODEL.  v002t06a006-v002t06a006. 2016
• EXPLORING AUGMENTATION OF THERMAL-FLUID TRANSPORT IN FRACTAL ARCHITECTURES.  v001t03a008-v001t03a008. 2016
• Efficient Multiline Anchor Systems for Floating Offshore Wind Turbines.  v006t09a042-v006t09a042. 2016
• IMPACT PRESSURE, VOID FRACTION, AND GREEN WATER VELOCITY DUE TO PLUNGING BREAKING WAVE IMPINGEMENT ON A 2D TENSION-LEG STRUCTURE.  v007t06a065-v007t06a065. 2016
• Influence of Nanoparticles on Spray Performance of Alternative Jet Fuels.  v003t03a009-v003t03a009. 2016
• LARGE EDDY SIMULATION OF EMULSIFIED CANOLA OIL SPRAYS IN SWIRL -PROMOTED COMBUSTION CHAMBER.  v07bt09a022-v07bt09a022. 2016
• MESOSCOPIC SIMULATION OF SLIP MOTION FOR GAS FLOW IN NANOCHANNELS.  v07bt09a024-v07bt09a024. 2016
• NOISE REDUCTION IN A HIGH LIFT WING USING SMAS: COMPUTATIONAL FLUID-STRUCTURAL ANALYSIS.  v001t02a009-v001t02a009. 2016
• NUMERICAL FLOW ANALYSIS OF HYDRATE FORMATION IN OFFSHORE PIPELINES USING COMPUTATIONAL FLUID DYNAMICS (CFD).  v008t11a007-v008t11a007. 2016
• Optimization of a Parametric FLNG in Finite Water Depth.  v007t06a071-v007t06a071. 2016
• Quantifying Model Discrepancy in Coupled Multi-Physics Systems.  v01at02a024-v01at02a024. 2016
• REDUCTION OF ACTUATION LOADS IN A SELF-DEPLOYING SMA-BASED SLAT-COVE FILLER FOR A TRANSPORT AIRCRAFT.  v002t04a016-v002t04a016. 2016
• SHAFT-LESS ENERGY STORAGE FLYWHEEL.  v002t13a001-v002t13a001. 2016
• SUPPRESSION OF IRREGULAR FREQUENCY IN MULTI-BODY PROBLEM AND FREE-SURFACE SINGULARITY TREATMENT.  v007t06a068-v007t06a068. 2016
• Simulation of Combustion Recession After End-of-Injection at Diesel Engine Conditions.  v001t06a016-v001t06a016. 2016
• THE STATE OF THE ART OF ORIGAMI-INSPIRED PRODUCTS: A REVIEW.  v05bt07a014-v05bt07a014. 2016
• The Transient Temperature Prediction in the Deepwater Riserless Well.  v008t11a013-v008t11a013. 2016
• Theoretical Prediction of Laminar Burning Speed and Ignition Delay of Gas to Liquid Fuel.  v06at08a001-v06at08a001. 2016
• USING A PRINCIPAL-AGENT MODEL TO INVESTIGATE DELEGATION IN SYSTEMS ENGINEERING.  v01bt02a046-v01bt02a046. 2016
• iFEED: Interactive Feature Extraction for Engineering Design.  v007t06a037-v007t06a037. 2016
• Damage Diagnostics of Composite Fan Blades Using the Modified Time Reversal Method.  v001t05a004-v001t05a004. 2015
• Nonlinear Deformations of Cantilever Beams with Piezoelectric Patches.  v009t12a066-v009t12a066. 2015
• WAVELET-BASED FILTERED-X LMS ALGORITHM FOR THE CONTROL OF PERMANENT MAGNET SYNCHRONOUS MOTORS.  v04bt04a039-v04bt04a039. 2015
• Passive Multi-Degree-of-Freedom Structural Control Using LPC Impact Dampers.  v04bt04a057-v04bt04a057. 2015
• Carbon Capture Using Amine-Impregnated Mesoporous Sorbent in Fixed and Bubbling Beds.  v06at07a021-v06at07a021. 2015
• A Linear Time-Variant (LTV) Ionic-Polymer-Metal-Composite (IPMC) Electrical Model With Effects of Capacitors and Resistors.  v002t34a004-v002t34a004. 2015
• Reduced Plate Model Used for 2D Traveling Wave Propagation.  v001t03a021-v001t03a021. 2015
• Active Artificial Hair Cells for Use in Fluid Environments.  v002t06a006-v002t06a006. 2015
• Adaptive State Feedback to Maximize the Power Capture and Reduce the Tower Motion of Wind Turbine in Partial Loading Operation.  v001t03a010-v001t03a010. 2015
• Design of a Reconfigurable SMA-Based Solar Array Deployment Mechanism.  v001t02a010-v001t02a010. 2015
• Non-Linear Impedance-Based Structural Health Monitoring for Damage Detection and Identification.  v002t05a008-v002t05a008. 2015
• Traveling Wave Phenomenon Through Piezoelectric Actuation of a Free-Free Cylindrical Tube.  v002t04a018-v002t04a018. 2015
• A Collaborative Decision Model for Low Energy Building Design Optimization.  v007t06a025-v007t06a025. 2015
• Informing Early Design via Crowd-Based Co-Creation.  v007t06a043-v007t06a043. 2015
• Reinforcement Learning for Control of a Shape Memory Alloy Based Self-Folding Sheet.  v05bt08a044-v05bt08a044. 2015
• Simultaneous Output-Only Identification of Physical Parameters and Unknown Inputs for Linear Mechanical Systems.  v008t13a101-v008t13a101. 2015
• Direct Numerical Simulation of the Flow Through a Structured Pebble Bed Near a Wall Boundary.  v001t03a008-v001t03a008. 2015
• EXPERIMENTAL INVESTIGATION ON FLOW INSTABILITY IN A SINGLE VERTICAL MICROTUBE.  v001t04a061-v001t04a061. 2015
• Fracture Behavior of Pressurized Defective Pipes Subjected to Large Tensile Strains.  v06bt06a042-v06bt06a042. 2015
• Experimental Investigations of the Effect of Scheme Exit Height and Double Row Injection on the Film Cooling Performance of a Micro Tangential Jet Scheme: Part I Pressure Side.  v001t13a003-v001t13a003. 2015
• Experimental Investigations of the Effect of Scheme Exit Height and Double Row Injection on the Film Cooling Performance of a Micro Tangential Jet Scheme: Part II Suction Side.  v001t13a004-v001t13a004. 2015
• COMBINED EFFECTS OF JET PLATE THICKNESS AND FILLET RADIUS ON LEADING EDGE JET IMPINGEMENT WITH ROUND AND RACETRACK SHAPED JETS.  v05at11a032-v05at11a032. 2015
• COMPARISON OF STAGGERED AND IN-LINE V-SHAPED DIMPLE ARRAYS USING S-PIV.  v05at11a031-v05at11a031. 2015
• LAMINAR FLAME SPEED MEASUREMENTS OF SYNTHETIC GAS BLENDS WITH HYDROCARBON IMPURITIES.  v04at04a068-v04at04a068. 2015
• A PREDICTIVE MODEL FOR PRELIMINARY GAS TURBINE BLADE COOLING ANALYSIS.  v05bt13a002-v05bt13a002. 2015
• EFFECT OF PAD FLEXIBILITY ON THE PERFORMANCE OF TILTING PAD JOURNAL BEARINGS - BENCHMARKING A PREDICTIVE MODEL.  v07at31a011-v07at31a011. 2015
• EFFECTS OF HYDROGEN ADDITION ON THE FLAME SPEEDS OF NATURAL GAS BLENDS UNDER UNIFORM TURBULENT CONDITIONS.  v04at04a066-v04at04a066. 2015
• FAILURE OF A TEST RIG OPERATING WITH PRESSURIZED GAS BEARINGS: A LESSON ON HUMILITY.  v07at30a001-v07at30a001. 2015
• FORCED COEFFICIENTS FORA SHORT LENGTH, OPEN-ENDS SQUEEZE FILM DAMPER WITH END GROOVES: EXPERIMENTS AND PREDICTIONS.  v07at30a007-v07at30a007. 2015
• FULL-SCALE TURBINE VANE END-WALL FILM-COOLING EFFECTIVENESS DISTRIBUTION USING PSP TECHNIQUE.  v05bt12a007-v05bt12a007. 2015
• Film Cooling Effectiveness of Transonic Turbine Vane Suction Side with Compound-Angle shaped hole configuration.  v05bt12a005-v05bt12a005. 2015
• MEASURED ROTORDYNAMIC AND LEAKAGE CHARACTERISTICS OF A TOOTH-ON-ROTOR LABYRINTH SEAL WITH COMPARISONS TO A TOOTH-ON-STATOR LABYRINTH SEAL AND PREDICTIONS.  v07at31a016-v07at31a016. 2015
• ORBIT-MODEL FORCE COEFFICIENTS FOR FLUID FILM BEARINGS: A STEP BEYOND LINEARIZATION.  v07at31a020-v07at31a020. 2015
• STRUCTURAL AND ROTORDYNAMIC FORCE COEFFICIENTS OF A SHIMMED BUMP FOIL BEARING: AN ASSESSMENT OF A SIMPLE ENGINEERING PRACTICE.  v07at31a023-v07at31a023. 2015
• TURBINE BLADE SURFACE PHANTOM COOLING FROM UPSTREAM NOZZLE TRAILING EDGE EJECTION.  v05bt12a003-v05bt12a003. 2015
• TURBINE PLATFORM COOLING AND BLADE SUCTION SURFACE PHANTOM COOLING FROM SIMULATED SWIRL PURGE FLOW.  v05bt12a011-v05bt12a011. 2015
• UHEGT, THE ULTRA-HIGH EFFICIENCY GAS TURBINE ENGINE WITH STATOR INTERNAL COMBUSTION.  v003t06a019-v003t06a019. 2015
• Vibration Modeling and Experimental Results of Two Phase Flow Twin-Screw Pump.  v07at30a016-v07at30a016. 2015
• Rheological and Wall-Slip Behaviors of Polymer Based Drilling Foams.  v010t11a036-v010t11a036. 2015
• Strain Capacity of X70 Pipeline Steel Subjected to Biaxial Loading Condition.  v05bt04a021-v05bt04a021. 2015
• Validation of Volterra Series Approach for Modelling Parametric Rolling of Ships.  v011t12a043-v011t12a043. 2015
• A Dynamic Spar Numerical Model for Passive Shape Change.  v002t06a002-v002t06a002. 2015
• Automated Multi-Zone Linear Parametric Black Box Modeling Approach for Building HVAC Systems.  v002t29a004-v002t29a004. 2015
• CONTROLLING BIFURCATION AND DYNAMIC BEHAVIOR IN VIBRO-IMPACT SYSTEM.  v04bt04a042-v04bt04a042. 2015
• COUPLED DYNAMIC ANALYSIS FOR MULTI-UNIT FLOATING OFFSHORE WIND TURBINE IN MAXIMUM OPERATIONAL AND SURVIVAL CONDITIONS.  v009t09a070-v009t09a070. 2015
• Control of Rotary Steerable Toolface in Directional Drilling.  v002t20a003-v002t20a003. 2015
• DATA ANALYTICS METHODS FOR WIND ENERGY APPLICATIONS.  v009t46a020-v009t46a020. 2015
• Generation and Optimization of Traveling Vibrating Waves in Self-Assembling Swimming Smart Boxes.  v008t13a092-v008t13a092. 2015
• HEAT TRANSFER IN A RIB AND PIN ROUGHENED ROTATING MULTI-PASS CHANNEL WITH HUB TURNING VANE AND TRAILING-EDGE SLOT EJECTION.  v05at11a007-v05at11a007. 2015
• In Search of Effective Design Problems for Design Research.  v007t06a011-v007t06a011. 2015
• Mechanical and Microstructural Properties of Selective Laser Melted 17-4 PH Stainless Steel.  v02at02a014-v02at02a014. 2015
• Modeling, Simulation and Experimental Validation of Heat Transfer During Selective Laser Melting.  v02at02a007-v02at02a007. 2015
• Teaching Students to Innovate: Evaluating Methods for Bioinspired Design and Their Impact on Design Self Efficacy.  v007t06a003-v007t06a003. 2015
• The Effect of Credit Definition and Aggregation Strategies on Multi-Objective Hyper-Heuristics.  v02bt03a030-v02bt03a030. 2015
• CONTROL OF FRICTION-INDUCED INSTABILITY IN SIMULTANEOUS TIME-FREQUENCY DOMAIN.  v04at04a074-v04at04a074. 2014
• GUIDED WAVE PROPAGATION IN TUBULAR SECTION WITH MULTI-LAYERED VISCOELASTIC COATING PART I - AXIAL WAVES.  v04bt04a033-v04bt04a033. 2014
• Near Wall Turbulence Characteristics of a Drag Reducing Polymer Fluid Flow in Concentric Annulus Using CFD.  v07bt08a056-v07bt08a056. 2014
• SIMULTANEOUS TIME-FREQUENCY CONTROL OF ACTIVE MAGNETIC BEARING.  v04at04a092-v04at04a092. 2014
• SIMULTANEOUS TIME-FREQUENCY SYNCHRONIZATION OF NON-AUTONOMOUS CHAOTIC SYSTEMS.  v04bt04a032-v04bt04a032. 2014
• SIZE-DEPENDENT ANTIBACTERIAL BEHAVIOR OF GRAPHENE QUANTUM DOTS.  v015t16a006-v015t16a006. 2014
• DESIGN AND EVALUATION OF A MULTI-SENSOR UNIT FOR MEASURING PHYSIOLOGICAL STRESSORS OF MEDICAL TRANSPORT.  v03bt03a054-v03bt03a054. 2014
• AN EXPERIMENTAL STUDY OF A NOVEL IMPACT DAMPER IN FREE VIBRATION OF STRUCTURES.  v001t01a002-v001t01a002. 2014
• EXPERIMENTAL PID CONTROLLER DESIGN: A NEW FREQUENCY DOMAIN APPROACH BASED ON DESIRED PERFORMANCE.  v003t38a006-v003t38a006. 2014
• THE USE OF VEHICLE DYNAMIC RESPONSE TO ESTIMATE ROAD PROFILE INPUT IN TIME DOMAIN.  v002t27a002-v002t27a002. 2014
• A Low-Cost Rotary Optical Potentiometer Mechanism Based on Optoelectronics Technique.  v003t44a003-v003t44a003. 2014
• A PERFORMANCE COMPARISON OF EMG CLASSIFICATION METHODS FOR HAND AND FINGER MOTION.  v002t16a008-v002t16a008. 2014
• A Two-Phase Framework for Linear Permanent-Magnet Machines and Multi-Axis Stages With Magnetic Levitation.  v003t45a001-v003t45a001. 2014
• Chaotic Synchronization of a Class of Nonlinear Systems via Sampled-Data State Feedback.  v003t41a001-v003t41a001. 2014
• DESIGN OF DELAY INDEPENDENT STATE FEEDBACK CONTROL FOR ROLL-TO-ROLL PRINTING APPLICATIONS.  v003t28a004-v003t28a004. 2014
• MODELING WEB TENSION DYNAMICS CONSIDERING THERMAL AND VISCOELASTIC EFFECTS: SIMULATIONS AND EXPERIMENTS.  v002t33a004-v002t33a004. 2014
• OPTIMAL SWITCHING SYNTHESIS FOR JUMP LINEAR SYSTEMS WITH GAUSSIAN INITIAL STATE UNCERTAINTY.  v002t24a003-v002t24a003. 2014
• SUBSEA PRODUCTION TWO-PHASE FLOW MODELING AND CONTROL OF PIPELINE AND MANIFOLD ASSEMBLIES.  v001t09a002-v001t09a002. 2014
• DESIGN OPTIMIZATION OF A TWIST COMPLIANT MECHANISM WITH NONLINEAR STIFFNESS.  v002t06a004-v002t06a004. 2014
• DEVELOPMENT OF A SMA-BASED, SLAT-COVE FILLER FOR REDUCTION OF AEROACOUSTIC NOISE ASSOCIATED WITH TRANSPORT-CLASS AIRCRAFT, WINGS.  v002t02a005-v002t02a005. 2014
• EXPERIMENTAL VALIDATION OF A SHAPE MEMORY ALLOY CONSTITUTIVE MODEL BY HETEROGENEOUS THERMAL LOADING USING INFRARED THERMOGRAPHY AND DIGITAL IMAGE CORRELATION.  v002t02a009-v002t02a009. 2014
• POWER RESPONSE OF A MUSCLE ACTUATOR DRIVEN BY A REGENERATIVE, ENZYMATIC PRESSURIZATION MECHANISM.  v002t06a008-v002t06a008. 2014
• ANALYSIS-DRIVEN DESIGN OPTIMIZATION OF A SMA-BASED SLAT-COVE FILLER FOR AEROACOUSTIC NOISE REDUCTION.  v002t02a006-v002t02a006. 2014
• Active Artificial Hair Cells Using Nonlinear Feedback Control.  v002t06a002-v002t06a002. 2014
• Adaptive Individual Blade Pitch Control to Reduce Platform Pitch Motion of a Floating Offshore Wind Turbine: Preliminary Study.  v001t03a016-v001t03a016. 2014
• COMPARISON OF THREE-DIMENSIONAL SHAPE MEMORY ALLOY CONSTITUTIVE MODELS: FINITE ELEMENT ANALYSIS OF ACTUATION AND SUPERELASTIC RESPONSES OF A SHAPE MEMORY ALLOY TUBE.  v002t02a004-v002t02a004. 2014
• Characterization and Modeling of Thermo-Mechanical Fatigue in Equiatomic NiTi Actuators.  v002t02a009-v002t02a009. 2014
• DEVELOPMENT AND CHARACTERIZATION OF EMBEDDED SENSORY PARTICLES USING MULTI-SCALE 3D DIGITAL IMAGE CORRELATION.  v002t02a010-v002t02a010. 2014
• Design and Optimization of an SMA-Based Self-Folding Structural Sheet With Sparse Insulating Layers.  v001t01a015-v001t01a015. 2014
• EFFECTS OF PROCESSING AND LOADING ON EQUIATOMIC NITI FATIGUE LIFE AND LOCALIZED FAILURE MECHANISMS.  v002t02a010-v002t02a010. 2014
• Experimental Analysis of Self-Folding SMA-Based Sheet Design for Simulation Validation.  v001t01a016-v001t01a016. 2014
• Feedback Control Applied to Finite Element Models of Morphing Structures.  v001t03a026-v001t03a026. 2014
• MODELING OF SHAPE MEMORY ALLOY WIRE MESHES USING EFFECTIVE LAMINA PROPERTIES FOR IMPROVED ANALYSIS EFFICIENCY.  v001t01a009-v001t01a009. 2014
• OPTIMIZATION OF A COMPOSITE MORPHING WING WITH SHAPE MEMORY ALLOY TORSIONAL ACTUATORS.  v002t02a014-v002t02a014. 2014
• RAPID CHARACTERIZATION OF SHAPE MEMORY ALLOY MATERIAL PARAMETERS USING COMPUTATIONAL INTELLIGENCE METHODS.  v001t01a001-v001t01a001. 2014
• Spectral Analysis and Characterization of a Membrane-Based Artificial Hair Cell Sensor.  v002t06a010-v002t06a010. 2014
• Travelling Wave Phenomenon Through a Piezoelectric Actuation on a Free-Free Beam.  v001t03a017-v001t03a017. 2014
• Vehicle Propulsion by Solid State Motion.  v002t04a007-v002t04a007. 2014
• Serious Gaming for Design and Systems Engineering Research.  v007t07a028-v007t07a028. 2014
• A METHODOLOGY FOR EXAMINING THE ROLE OF ADAPTIVE EXPERTISE ON CAD MODELING.  v02at02a057-v02at02a057. 2014
• DESIGN AND OPTIMIZATION OF A BEND-AND-SWEEP COMPLIANT MECHANISM.  v06at07a023-v06at07a023. 2014
• SIMULATION-BASED DESIGN OF A SELF-FOLDING SMART MATERIAL SYSTEM.  v06bt07a045-v06bt07a045. 2014
• DIRECT NUMERICAL SIMULATION AND LINEAR STABILITY ANALYSIS OF THE FLOW IN A PEBBLE BED.  ASME -Publications- Fed. v01ct15a012-v01ct15a012. 2014
• AN EXPERIMENTAL INVESTIGATION OF ANALOGY FORMATION USING THE ENGINEERING-TO-BIOLOGY THESAURUS.  v005t06a007-v005t06a007. 2014
• AN EXPLORATORY STUDY ON THE EFFECTIVENESS OF AN INCLUSIVE DESIGN TOOL WITH A METRIC TO EVALUATE INCLUSIVITY OF CONCEPTUAL DESIGNS.  v005t06a012-v005t06a012. 2014
• Control of a Shape Memory Alloy Based Self-Folding Sheet.  v05bt08a041-v05bt08a041. 2014
• Design and Analysis of a Self-Folding SMA-SMP Composite Laminate.  v05bt08a048-v05bt08a048. 2014
• EMPIRICAL STUDIES OF DESIGN THINKING: PAST, PRESENT, FUTURE.  v005t06a020-v005t06a020. 2014
• NOVEL PIXELATED MULTICELLULAR REPRESENTATION FOR ORIGAMI STRUCTURES THAT INNOVATES COMPUTATIONAL DESIGN AND CONTROL.  v06bt07a041-v06bt07a041. 2014
• Vascular Fluid Damping of Flexible Multifunctional Composite Cantilevers: Experiment, Modeling and Analysis.  v008t11a088-v008t11a088. 2014
• Experimental Investigation of Film Cooling Performance for a New Shaped Hole at the Leading Edge.  v002t08a001-v002t08a001. 2014
• Effects of Non-Uniform Heating on Two-Phase Flow through Microchannels.  v002t08a012-v002t08a012. 2014
• A Procedure for the Pre-Conceptual Design of Fast Reactors and Application to a Gas-Cooled Sub-Critical Transmuter.  v005t16a001-v005t16a001. 2014
• A Time-Dependent Solver for Coupled Neutron-Transport Thermal-Mechanics Calculations and Simulation of a Godiva Prompt-Critical Burst.  v004t11a008-v004t11a008. 2014
• HEAD LOSS THROUGH FIBROUS BEDS GENERATED ON DIFFERENT TYPES OF CONTAINMENT SUMP STRAINERS.  v005t17a069-v005t17a069. 2014
• LES of an Isothermal High Reynolds Number Turbulent Round Jet.  v004t10a048-v004t10a048. 2014
• Molten Salt Reactor With Simplified Fuel Recycling and Delayed Carrier Salt Cleaning.  v003t05a015-v003t05a015. 2014
• Optimization of Confined Laminar Natural Convection for Dry Cask Storage Systems.  v004t10a038-v004t10a038. 2014
• SENSITIVITY ANALYSIS OF A PWR RESPONSE DURING A LOSS OF COOLANT ACCIDENT UNDER A HYPOTHETICAL CORE BLOCKAGE SCENARIO USING RELAP5-3D.  v005t17a073-v005t17a073. 2014
• SENSITIVITY ANALYSIS OF THE RESPONSE OF PWR CONTAINMENT DURING A LOSS OF COOLANT ACCIDENT USING RELAP5-3D AND MELCOR.  v02bt09a062-v02bt09a062. 2014
• WATER CHEMISTRY SENSITIVITY ON FIBROUS DEBRIS BYPASS THROUGH A CONTAINMENT SUMP STRAINER.  v02bt09a055-v02bt09a055. 2014
• A REVIEW OF HOLE GEOMETRY AND COOLANT DENSITY EFFECT ON FILM COOLING.  v003t20a003-v003t20a003. 2014
• HEAT TRANSFER ENHANCEMENT FOR TURBINE BLADE INTERNAL COOLING.  v003t23a005-v003t23a005. 2014
• VALIDATION OF QUASI-STEADY ANALYSIS FOR LYMPHATIC FLUID FLOW AND MASS TRANSPORT.  v01bt46a004-v01bt46a004. 2014
• EXPERIMENTAL INVESTIGATION OF LEADING EDGE IMPINGEMENT UNDER HIGH ROTATION NUMBERS WITH RACETRACK SHAPED JETS.  v05at12a031-v05at12a031. 2014
• FILM COOLING WITH FORWARD AND BACKWARD INJECTION FOR CYLINDRICAL AND FAN-SHAPED HOLES USING PSP MEASUREMENT TECHNIQUE.  v05bt13a042-v05bt13a042. 2014
• REVIEW OF PLATFORM COOLING TECHNOLOGY FOR HIGH PRESSURE TURBINE BLADES.  v05bt13a046-v05bt13a046. 2014
• Hydrodynamic Module Coupling in the Offshore Wind Energy Simulation (OWENS) Tookit.  v09bt09a027-v09bt09a027. 2014
• A Combined Experimental and Numerical Study of the Turbine Blade Tip Film Cooling Effectiveness under Rotation Condition.  v05bt13a019-v05bt13a019. 2014
• A Combined Numerical and Experimental Study of the Effect of Non-Axisymmetric Contouring on Performance and Film Cooling Behavior of a Rotating Turbine Endwall.  v05bt13a020-v05bt13a020. 2014
• A Comparative Numerical Study of Aerodynamics and Heat Transfer on Transitional Flow Around a Highly Loaded Turbine Blade with Flow Separation Using RANS, URANS and LES.  v05ct17a001-v05ct17a001. 2014
• AN ALL-METAL COMPLIANT SEAL VERSUS A LABYRINTH SEAL: A COMPARISON OF GAS LEAKAGE AT HIGH TEMPERATURES.  v05ct16a014-v05ct16a014. 2014
• An Experimental Investigation of the Dynamic Performance of a Vertical-Application Three-Lobe Bearing.  v07bt32a007-v07bt32a007. 2014
• An Experimental Study of the Load-Orientation Sensitivity of Three-Lobe Bearings.  v07bt32a006-v07bt32a006. 2014
• LAMINAR AND TURBULENT FLAME SPEEDS FOR NATURAL GAS/HYDROGEN BLENDS.  v04bt04a039-v04bt04a039. 2014
• ON THE PREDICTED PERFORMANCE OF OIL LUBRICATED THRUST COLLARS IN INTEGRALLY GEARED COMPRESSORS.  v03bt25a016-v03bt25a016. 2014
• Prediction of Gas Thrust Foil Bearing Performance for Oil-Free Automotive Turbochargers.  v01bt24a013-v01bt24a013. 2014
• ROTORDYNAMIC PERFORMANCE OF A NEGATIVE-SWIRL BRAKE FOR A TOOTH-ON-STATOR LABYRINTH SEAL.  v07at31a011-v07at31a011. 2014
• Simulation of Multi-Liquid-Layer Sloshing With Vessel Motion by Using Moving Particle Simulation.  v01at01a044-v01at01a044. 2014
• THE EFFECT OF IMPURITIES ON IGNITION DELAY TIMES AND LAMINAR FLAME SPEEDS OF SYNGAS MIXTURES AT GAS TURBINE CONDITIONS.  v04at04a027-v04at04a027. 2014
• TILTING PAD JOURNAL BEARINGS: ON BRIDGING THE HOT GAP BETWEEN EXPERIMENTAL RESULTS AND MODEL PREDICTIONS.  v07bt32a010-v07bt32a010. 2014
• TURBINE BLADE TIP FILM-COOLING AND HEAT TRANSFER MEASUREMENTS AT HIGH BLOWING RATIOS.  v05bt13a025-v05bt13a025. 2014
• 3D Flow Simulations in a Simplified Right Ventricle Model.  v01at02a012-v01at02a012. 2014
• 3D Reconstruction of the Left Ventricle From Four Echocardiographic Projections.  v01at02a046-v01at02a046. 2014
• A NUMERICAL APPROACH IN PREDICTING FLOW FIELD INDUCED BY RANDOMLY MOVING NANO PARTICLES.  v001t02a010-v001t02a010. 2014
• A NUMERICAL CODE FOR WAVES IN A TWO-LAYER SHALLOW FLUID.  v08bt06a054-v08bt06a054. 2014
• A STUDY OF ENGINEERING DESIGN PROJECT COMPLEXITY AND RISK INDICATORS.  v02bt02a021-v02bt02a021. 2014
• AN EXPERIMENTAL STUDY OF HEAT TRANSFER CHARACTERISTICS OF MICROENCAPSULATED PHASE CHANGE MATERIAL SLURRY IN A COIL HEAT EXCHANGER.  v08bt09a041-v08bt09a041. 2014
• AUTOMATED MODELING OF BUILDING HVAC SYSTEMS FOR MPC.  v001t07a005-v001t07a005. 2014
• AUTONOMOUS LIGHTING AUDITS: PART 1-BUILDING NAVIGATION AND MAPPING.  v001t17a003-v001t17a003. 2014
• AUTONOMOUS LIGHTING AUDITS: PART 2-LIGHT IDENTIFICATION AND ANALYSIS.  v001t17a004-v001t17a004. 2014
• Advanced Five-Plane Lancet Needle Design, Grinding, and Tissue Insertion.  v002t02a028-v002t02a028. 2014
• Aerodynamic Design of Flat Delta Kite Based on Polhamus Concept of Leading Edge Suction Analogy.  v01at02a006-v01at02a006. 2014
• An Immersed Boundary Method for Calculating the Relative Viscosity of a Suspension of Rigid Particles.  v01at02a001-v01at02a001. 2014
• CALCIUM REGULATION IN LYMPHATIC ENDOTHELIAL CELLS UNDER FLOW.  v01at05a019-v01at05a019. 2014
• COMPENSATION OF HVAC SYSTEM NONLINEARITIES USING CASCADED CONTROL ARCHITECTURE.  v002t22a006-v002t22a006. 2014
• Creating Reduced Kinetics Models That Satisfy the Entropy Inequality.  v04at04a047-v04at04a047. 2014
• DESIGN OF A MINI HEAT SINK BASED ON CONSTRUCTAL THEORY FOR ELECTRONIC CHIP COOLING.  v001t05a007-v001t05a007. 2014
• DEVELOPMENT OF A BIODEGRADABLE REGENERATIVE IMPLANT FOR THE TREATMENT OF LONG BONE COMMINUTED FRACTURES.  v01at17a004-v01at17a004. 2014
• Development of a Search Tool to Identify Structural Design Principles for Bioinspired Materials Design.  v007t07a001-v007t07a001. 2014
• Dynamic Response Control of Top-Tension Risers by a Variable Damping and Stiffness System With Magneto-Rheological Damper.  v06at04a047-v06at04a047. 2014
• EXPERIMENTAL PERFORMANCE OF AN OPEN ENDS, CENTRALLY GROOVED, SQUEEZE FILM DAMPER OPERATING WITH LARGE AMPLITUDE ORBITAL MOTIONS.  v07bt32a005-v07bt32a005. 2014
• EXPERIMENTAL STUDY OF THE EFFECT OF FUEL PROPERTIES ON SPRAY PERFORMANCE OF ALTERNATIVE JET FUEL.  v03at03a008-v03at03a008. 2014
• Enhancement of Kirschner Wire for Bone Drilling.  v002t02a030-v002t02a030. 2014
• Experimental Identification of Dynamic Force Coefficients for a 110 mm Compliantly Damped Hybrid Gas Bearing.  v07bt32a025-v07bt32a025. 2014
• GUIDED WAVE PROPAGATION IN TUBULAR SECTION WITH MULTI-LAYERED VISCOELASTIC COATING PART II- CIRCUMFERENTIAL WAVES.  v04at04a075-v04at04a075. 2014
• IMPLICATIONS OF INCREASED LOWER EXTREMITY MOVEMENT VARIABILITY ON FALL SUSCEPTIBILITY AT INCREASED STRIDE LENGTHS DURING LOCOMOTION.  v015t16a004-v015t16a004. 2014
• INVERSE DESIGN OF LCN FILMS FOR ORIGAMI APPLICATIONS USING TOPOLOGY OPTIMIZATION.  v001t01a011-v001t01a011. 2014
• MODELING AND ANALYSIS OF TIME-PERIODIC GEARBOX VIBRATION.  v03bt46a032-v03bt46a032. 2014
• MODELING OF THE EFFECTIVE ACTUATION RESPONSE OF SMA-MAX PHASE COMPOSITES WITH PARTIALLY TRANSFORMING NITI.  v002t02a016-v002t02a016. 2014
• Multi-Regional Multi-Objective Optimization of an Algal Biofuel Polygeneration Supply Chain with Fuzzy Mathematical Programming.  v002t03a004-v002t03a004. 2014
• NON-LINEAR DYNAMICS OF PARAMETRIC ROLL OF CONTAINER SHIP IN IRREGULAR SEAS.  v007t12a018-v007t12a018. 2014
• NREL Phase VI Wind Turbine Modeling Using an Unsteady Panel Method.  v01at02a002-v01at02a002. 2014
• NUMERICAL INVESTIGATION OF THERMAL FIELDS AROUND SUBSEA BURIED PIPELINES.  v06bt04a061-v06bt04a061. 2014
• Numerical Simulation of a Microencapsulated Phase Change Material Slurry Flowing in a Helical Coil Heat Exchanger.  v08bt09a042-v08bt09a042. 2014
• Optimization of a Bend-Twist-and-Sweep Compliant Mechanism.  v002t06a004-v002t06a004. 2014
• Parallel Implementation of Periodic Boundary Conditions for a Curvilinear Immersed Boundary Method.  v01at02a019-v01at02a019. 2014
• SELF-POWERED INTERFACE EXTERNAL CIRCUIT FOR LOW-FREQUENCY ACOUSTIC ENERGY HARVESTER.  v06at07a067-v06at07a067. 2014
• Self-Assembling Swimming Smart Boxes.  v002t06a006-v002t06a006. 2014
• Self-Propelled Swimming Simulations of Self-Assembling Smart Boxes.  v001t03a033-v001t03a033. 2014
• Stability Analysis of the Wing Leading Edge Spar of a Passively Morphing Ornithopter.  v002t06a005-v002t06a005. 2014
• THREE-DIMENSIONAL HYDROELASTIC DYNAMIC ANALYSES INCLUDING TORSION FOR A LARGE FLOATING PLATFORM IN FREQUENCY AND TIME DOMAINS.  v007t12a020-v007t12a020. 2014
• Understanding Deformation on Machined Surfaces.  v001t01a007-v001t01a007. 2014
• VORTEX GENERATION IN TWO INTRACRANIAL ANEURYSMS.  v003t12a010-v003t12a010. 2014
• BIOLOGICALLY INSPIRED CLOSED LOOP MANUFACTURING NETWORKS.  v02bt02a025-v02bt02a025. 2013
• A COMPREHENSIVE ALGORITHM FOR THE ANALYSIS OF ECG WAVEFORMS.  477-481. 2013
• A NEW DESIGN FOR VARIABLE DIAMETER ORIFICE MECHANISM.  1551-1552. 2013
• A NOVEL IMPACT DAMPER CONSISTING OF A LINEAR CHAIN OF PARTICLES.  181-190. 2013
• A PHYSICS-BASED MODELING APPROACH OF A NATURAL GAS HCCI ENGINE.  765-773. 2013
• CHARACTERIZATION AND COMBUSTION PERFORMANCE OF CORN OIL-BASED BIOFUEL BLENDS.  985-991. 2013
• DELAYED OUTPUT FEEDBACK CONTROL FOR NONLINEAR SYSTEMS WITH FUZZY OBSERVERS.  137-142. 2013
• DESIGN OF A MASSIVELY RECONFIGURABLE ORIGAMI SPACE STRUCTURE INCORPORATING SHAPE MEMORY ALLOYS.  115-122. 2013
• DYNAMIC MEASUREMENTS OF MICRO-METER PARTICLE DETACHMENT ON GLASS SURFACES.  959-964. 2013
• EFFECTS OF SPINDLE SPEED ON TURNING STABILITY.  673-677. 2013
• EXTENDED FINITE ELEMENT ANALYSIS OF JOURNAL BEARING DYNAMIC FORCED PERFORMANCE TO INCLUDE FLUID INERTIA FORCE COEFFICIENTS.  1033-1041. 2013
• IMPACT OF COUPLED WHIRLING AND TOOL GEOMETRY ON MACHINING DYNAMICS.  667-672. 2013
• IMPACT OF SPINDLE SPEED ON MICRO-MILLING STABILITY.  687-693. 2013
• LEADING EDGE JET IMPINGEMENT UNDER HIGH ROTATION NUMBERS.  1963-1976. 2013
• Laser induced nano-droplet ejection for the construction of nano-inkjets.  679-684. 2013
• MICRODRILLING OF BIOCOMPATIBLE MATERIALS.  1969-1977. 2013
• MITIGATION OF MILLING CHATTER AT HIGH SPEED.  695-699. 2013
• SIMULTANEOUS TIME-FREQUENCY CONTROL OF MULTI-DIMENSIONAL MICRO-MILLING INSTABILITY.  679-685. 2013
• A NOVEL MAGNETICALLY-LEVITATED FLYWHEEL ENERGY STORAGE ALTERNATIVE TO LITHIUM-ION BATTERY PACKS FOR OILFIELD SERVICE.  525-534. 2013
• DESIGN OF A MULTIPLE-ACTUATION SHAPE MEMORY ALLOY PIPE COUPLER: MATERIAL DEVELOPMENT AND CHARACTERIZATION.  1683-1694. 2013
• Direct Adaptive Control of Discrete-Time Infinite-Dimensional Systems in a Hilbert Space.  v04bt04a021-v04bt04a021. 2013
• Direct Adaptive Individual Blade Pitch Control for Large Wind Turbines.  v06bt07a084-v06bt07a084. 2013
• Experimental Flow Field Investigations Downstream a Film Cooling Scheme Over a Flat Plate Using the PIV Technique.  v001t01a045-v001t01a045. 2013
• Flutter Suppression of Wind Turbine Blade Using Adaptive Control.  v04at04a007-v04at04a007. 2013
• A STACKELBERG GAME THEORETIC DRIVER MODEL FOR MERGING.  v002t30a003-v002t30a003. 2013
• DECENTRALIZED CONTROL OF PRINT REGISTRATION IN ROLL-TO-ROLL PRINTING PRESSES.  v001t14a006-v001t14a006. 2013
• PARETO OPTIMAL SETPOINTS FOR HVAC NETWORKS VIA ITERATIVE NEAREST NEIGHBOR COMMUNICATION.  v001t13a004-v001t13a004. 2013
• EFFECT OF COATING THICKNESS ON TRIBOLOGICAL PERFORMANCE OF CrN IN DRY SLIDING CONTACT.  75-77. 2013
• A New Rotary Position-Control System With Color Sensing.  v003t40a002-v003t40a002. 2013
• An Ionic-Polymer-Metal-Composite Electrical Model With a Linear Time-Variant Method.  v003t42a002-v003t42a002. 2013
• Bandwidth Allocation of Networked Control Systems With Exponential Approximation.  v002t20a002-v002t20a002. 2013
• MODELING THE EFFECTS OF HEAT TRANSFER PROCESSES ON MATERIAL STRAIN AND TENSION IN ROLL TO ROLL MANUFACTURING.  v003t48a004-v003t48a004. 2013
• TWO DIMENSIONAL MODIFIED REYNOLDS EQUATION INCLUDING PRESSURE DEPENDENT VISCOSITY EFFECT.  201-203. 2013
• The Effect of Static and Dynamic Loading on Degradation of PLLA Stent Fibers.  v001t10a039-v001t10a039. 2013
• Aeroelastic Suppression of Wind Turbine Blade Using Trailing-Edge Flap.  v001t03a002-v001t03a002. 2013
• Artificial Cochlear Hair Cells Using Active Piezoelectric Materials.  v002t06a002-v002t06a002. 2013
• Control of Strain Characteristics of SMA Wires Using Seebeck Voltage.  v001t03a020-v001t03a020. 2013
• Design and Characterization of Piezo-Based Stereocilia.  v002t06a017-v002t06a017. 2013
• Electronic Damping in Multifunctional Systems.  v001t01a018-v001t01a018. 2013
• Experimental Implementation of Opposed SMA Wires for Actuator Control.  v001t03a003-v001t03a003. 2013
• Numerical Evaluation of the Effect of Ni4Ti3 Precipitates on the Overall Thermo-Mechanical Response of NiTi Shape Memory Alloys.  v002t02a012-v002t02a012. 2013
• On the Energy Release Rate During Global Thermo-Mechanically-Induced Phase Transformation in Shape Memory Alloys.  v002t02a014-v002t02a014. 2013
• PERFORMANCE CHARACTERISTICS OF METAL MESH FOIL BEARINGS: PREDICTIONS VS. MEASUREMENTS.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 122503. 2013
• THE ROLE OF PIVOT STIFFNESS ON THE DYNAMIC FORCE COEFFICIENTS OF TILTING PAD JOURNAL BEARINGS.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 112505. 2013
• Ground-Based Response of a Spinning, Cyclic Symmetric Rotor Assembled to a Flexible Stationary Housing via Multiple Bearings.  v008t13a048-v008t13a048. 2013
• Three Dimensional Flow Around a Biomimetic Unbounded Flapping Cantilever.  ASME -Publications- Fed. v01at04a007-v01at04a007. 2013
• Experimental Flow Field Investigations of Nozzle Film Cooling Scheme on a Flat Plate Using Stereo PIV.  v003t08a013-v003t08a013. 2013
• New Predictive Methodology for the Onset of Flow Instability in Single Horizontal Microtube With an Inlet Orifice.  v001t03a015-v001t03a015. 2013
• The Effect of Inlet Orifice on Critical Heat Flux and Flow Boiling Heat Transfer in Single Horizontal Microtube.  v001t03a016-v001t03a016. 2013
• ASSESSMENT OF A DOUBLE HOLE FILM COOLING GEOMETRY USING S-PIV AND PSP.  v03bt13a024-v03bt13a024. 2013
• IGNITION DELAY TIME EXPERIMENTS FOR NATURAL GAS/HYDROGEN BLENDS AT ELEVATED PRESSURES.  v01bt04a014-v01bt04a014. 2013
• LEADING EDGE IMPINGEMENT WITH RACETRACK SHAPED JETS AND VARYING INLET SUPPLY CONDITIONS.  v03at12a020-v03at12a020. 2013
• MEASUREMENTS VERSUS PREDICTIONS FOR THE STATIC AND DYNAMIC CHARACTERISTICS OF A FOUR-PAD, ROCKER-PIVOT, TILTING-PAD JOURNAL BEARING.  v07at29a008-v07at29a008. 2013
• NUMERICAL STUDY ON THE EFFECT OF REAL SYNGAS COMPOSITIONS ON IGNITION DELAY TIMES AND LAMINAR FLAME SPEEDS AT GAS TURBINE CONDITIONS.  v01bt04a015-v01bt04a015. 2013
• Aero-Thermal Optimization and Experimental Verification for the Discrete Film Cooling of a Turbine Airfoil.  v03bt13a050-v03bt13a050. 2013
• COMMENTS ON A NEWLY-IDENTIFIED DESTABILIZING ROTORDYNAMIC MECHANISM ARISING IN VERTICAL HYDRAULIC TURBINES AND THE BACK SHROUDS OF CENTRIFUGAL IMPELLERS.  v07at29a004-v07at29a004. 2013
• DAMPING AND INERTIA COEFFICIENTS FOR TWO END SEALED SQUEEZE FILM DAMPERS WITH A CENTRAL GROOVE: MEASUREMENTS AND PREDICTIONS.  v07bt30a005-v07bt30a005. 2013
• EFFECT OF COOLANT DENSITY ON LEADING EDGE SHOWERHEAD FILM COOLING USING PSP MEASUREMENT TECHNIQUE.  v03bt13a005-v03bt13a005. 2013
• Experimental Investigation of the Effect of Purge Flow on Film Cooling Effectiveness on a Rotating Turbine with Non-Axisymmetric Endwall Contouring.  v03bt13a033-v03bt13a033. 2013
• FLUID DYNAMICAL AND MODELING ISSUES OF CHEMICAL FLOODING FOR ENHANCED OIL RECOVERY.  v006t11a025-v006t11a025. 2013
• HEAT TRANSFER AND PRESSURE LOSS MEASUREMENTS IN A TURBULATED HIGH ASPECT RATIO CHANNEL WITH LARGE REYNOLDS NUMBER FLOWS.  v03at12a051-v03at12a051. 2013
• HEAT TRANSFER MEASUREMENTS IN ROTATING BLADE-SHAPE SERPENTINE COOLANT PASSAGE WITH RIBBED WALLS AT HIGH REYNOLDS NUMBERS.  v03at12a004-v03at12a004. 2013
• Heat Transfer in Rotating Multi-Pass Rectangular Smooth Channel with and without a Turning Vane in Hub Region.  435-445. 2013
• Heat Transfer in Rotating Serpentine Coolant Passage with Ribbed Walls at Low Mach Numbers.  v03at12a009-v03at12a009. 2013
• IMPINGEMENT HEAT TRANSFER FROM JET ARRAYS ON TURBULATED TARGET WALLS AT LARGE REYNOLDS NUMBERS.  v03at12a052-v03at12a052. 2013
• INFLUENCE OF COOLANT DENSITY ON TURBINE PLATFORM FILM-COOLING WITH STATOR-ROTOR PURGE FLOW AND COMPOUND-ANGLE HOLES.  v03bt13a004-v03bt13a004. 2013
• MEASURED COMPARISON OF LEAKAGE AND ROTORDYNAMIC CHARACTERISTICS FOR A SLANTED-TOOTH AND A STRAIGHT-TOOTH LABYRINTH SEAL.  v07bt30a001-v07bt30a001. 2013
• MEASUREMENT AND MODELLING OF BLADE TIP COOLING IN GAS TURBINES.  v03bt13a034-v03bt13a034. 2013
• Numerical Simulation of Film Cooling on Rotating Blade Tips within a High-Pressure Turbine.  v03bt13a032-v03bt13a032. 2013
• Numerical Simulation of Flow and Heat Transfer in Rotating Cooling Passage with Turning Vane in Hub Region.  v03at12a010-v03at12a010. 2013
• ON THE FAILURE OF A GAS FOIL BEARING: HIGH TEMPERATURE OPERATION WITHOUT COOLING FLOW.  v07at29a006-v07at29a006. 2013
• STATIC DESTABILIZING BEHAVIOR FOR GAS ANNULAR SEALS AT HIGH ECCENTRICITY RATIOS.  v07at29a003-v07at29a003. 2013
• THE IMPACT OF HOLE DEPTH ON THE ROTORDYNAMIC AND LEAKAGE CHARACTERISTICS OF HOLE-PATTERN-STATOR GAS ANNULAR SEALS.  v07at29a009-v07at29a009. 2013
• TURBINE-FLOATER-TETHER COUPLED DYNAMIC ANALYSIS INCLUDING SECOND-ORDER SUM-FREQUENCY WAVE LOADS FOR A TLP-TYPE FOWT (FLOATING OFFSHORE WIND TURBINE).  v008t09a080-v008t09a080. 2013
• REVIEW OF STATE-LEVEL LOAN AND GRANT FUNDING PROGRAMS FOR LOCAL FREIGHT RAIL INFRASTRUCTURE.  v001t05a003-v001t05a003. 2013
• 3D Core-Shell Simulation of Hydrogel Swelling Behavior for Controlled Drug Delivery.  v03bt03a027-v03bt03a027. 2013
• A CFD SIMULATION OF NEAR WALL TURBULENT FLOW IN CONCENTRIC ANNULUS.  v007t08a068-v007t08a068. 2013
• A REDUCED-ORDER MODEL FOR TURBOMACHINERY FLOWS USING PROPER ORTHOGONAL DECOMPOSITION.  v06bt37a020-v06bt37a020. 2013
• ACOUSTIC ENERGY HARVESTING USING QUARTER-WAVELENGTH STRAIGHT-TUBE RESONATOR.  467-473. 2013
• APPLICATION OF NANOFLUIDS IN A SHELL-AND-TUBE HEAT EXCHANGER.  v001t02a003-v001t02a003. 2013
• COMBINED RANDOM SWELL AND TRANSIENT LONG WAVES: DISSIPATION CHARACTERISTICS.  v005t06a042-v005t06a042. 2013
• CYCLIC VARIABILITY IN DIESEL/GASOLINE DUAL-FUEL COMBUSTION ON A MEDIUM-DUTY DIESEL ENGINE.  v001t03a011-v001t03a011. 2013
• Cutting Force of Hollow Needle Insertion in Soft Tissue.  v001t01a007-v001t01a007. 2013
• DYNAMIC ANALYSIS AND SLIDING MODE CONTROL OF A NOVEL EXTENDABLE MODULAR MULTI-DOFS LINK.  337-341. 2013
• Development of a Computer Program for Three Dimensional Analysis of Zero Speed First Order Wave Body Interaction in Frequency Domain.  v005t06a094-v005t06a094. 2013
• EXPERIMENTAL OBSERVATIONS ON THE CENTRAL NERVOUS SYSTEM'S GOVERNING STRATEGIES ON THE ARM REACHING WITH REDUCED MOBILITY.  483-492. 2013
• Effect of Mechanical Alloying on Al6061-Graphene Composite Fabricated by Semi-Solid Powder Processing.  v002t03a001-v002t03a001. 2013
• FLOW VELOCITY AND IMPACT PRESSURE IN LIQUID SLOSHING.  v009t12a014-v009t12a014. 2013
• Fabrication of Graphene Reinforced Aluminum Composite by Semi-Solid Processing.  v02bt02a030-v02bt02a030. 2013
• Increasing System Robustness Through a Utility-Based Analysis.  v02bt02a020-v02bt02a020. 2013
• MODELING MATERIAL REMOVAL IN LAPPING OF BRITTLE MATERIALS.  1941-1945. 2013
• MULTI-PARAMETRIC TUNING OF DYNAMIC AIR CONDITIONING MODELS USING EXPERIMENTAL DATA.  519-+. 2013
• Melt Pool Flow and Surface Evolution During Pulsed Laser Micro Polishing of Ti6Al4V.  v001t01a054-v001t01a054. 2013
• NUMERICAL SIMULATION OF THERMAL PERFORMANCE OF A HIGH ASPECT RATIO THERMAL ENERGY STORAGE DEVICE.  1815-1821. 2013
• PARAMETRIC ROLL OF HIGH SPEED SHIPS IN REGULAR WAVES.  v005t06a095-v005t06a095. 2013
• PROPPED FRACTURE CONDUCTIVITY IN SHALES.  v006t11a031-v006t11a031. 2013
• Predicting Well Performance in Naturally Fractured Reservoir.  v006t11a032-v006t11a032. 2013
• RELATION BETWEEN FLOW VELOCITY AND IMPACT PRESSURE IN A GREEN WATER FLOW.  v009t12a013-v009t12a013. 2013
• SIMULATION OF WIND FARM OPERATIONS AND MAINTENANCE.  v008t44a007-v008t44a007. 2013
• SPRAY CHARACTERISTICS OF FISCHER-TROPSCH ALTERNATE JET FUELS.  v002t03a021-v002t03a021. 2013
• STACKELBERG GAME BASED MODEL OF HIGHWAY DRIVING.  499-508. 2013
• THE EFFECT OF CELL-PHONE USE ON DRIVER ATTENTION.  31-36. 2013
• TURNING DYNAMICS PART 1: EXPERIMENTAL ANALYSIS.  647-655. 2013
• TURNING DYNAMICS PART 2: STABILITY AT HIGH SPEED.  657-665. 2013
• TWO-DIMENSIONAL NUMERICAL ANALYSES OF ACOUSTOPHORESIS PHENOMENA IN MICROFLUIDIC CHANNEL WITH MICROPARTICLE-SUSPENDED, VISCOUS, MOVING FLUID MEDIUM.  357-366. 2013
• The Direction of Cyclic Stretch-Induced Cell and Stress Fiber Alignment Depends on Matrix Rigidity.  v01bt35a006-v01bt35a006. 2013
• Thermodynamic Considerations for Advanced, High Efficiency IC Engines.  v001t03a004-v001t03a004. 2013
• Un-shocked High Amplitude Standing Waves in Wave-shaped Resonators.  49-58. 2013
• VALIDATION AND RESULTS OF A PSEUDO-MULTI-ZONE COMBUSTION TRAJECTORY PREDICTION MODEL FOR CAPTURING SOOT AND NOX FORMATION ON A MEDIUM DUTY DIESEL ENGINE.  v001t03a009-v001t03a009. 2013
• VISCOSITY MEASUREMENTS OF NANOFLUIDS AT ELEVATED TEMPERATURES AND PRESSURES.  v001t11a003-v001t11a003. 2013
• Wall Shear Stress and Intraluminal Thrombus Changes in Abdominal Aortic Aneurysms: Study With Longitudinal Patients.  v01at01a005-v01at01a005. 2013
• IDENTIFICATION AND QUANTIFICATION OF RESIDUAL STRAINS DURING CURING OF CARBON FIBER EPOXY LAMINATES.  139-147. 2012
• An Analytical Model of Flow Boiling Heat Transfer for Slug Flow in a Single Circular Horizontal Micro-Channel.  941-948. 2012
• Experimental Investigation of Double Rows Film Cooling on Vane Pressure Side.  1917-1926. 2012
• Experimental Investigations of the Film Cooling Performance of a Micro-Tangential-Jet Scheme on a Gas Turbine Vane: Part 1 Effectiveness.  385-395. 2012
• Experimental Investigations of the Film Cooling Performance of a Micro-Tangential-Jet Scheme on a Gas Turbine Vane: Part 2 Heat Transfer Coefficient.  397-407. 2012
• H Based Adaptive Fuzzy Control of a Tower Crane System.  161-166. 2012
• Adaptive Control of Flow Over Rotating Wind Turbine Blades Using the Beddoes-Leishman Dynamic Stall Model.  25-32. 2012
• Computation of a Lower Bound for a Vehicle Routing Problem With Motion Constraints.  695-701. 2012
• MODELING OF TEMPERATURE DISTRIBUTION IN A MOVING WEB TRANSPORTED OVER A HEAT TRANSFER ROLLER.  405-414. 2012
• OUTPUT REGULATION OF A CLASS OF NONLINEAR SYSTEMS USING DIFFERENTIAL-ALGEBRAIC EQUATIONS.  635-643. 2012
• Sub-Optimal Stationary Policies for a Class of Stochastic Optimization Problems Arising in Robotic Surveillance Applications.  263-272. 2012
• A FINITE ELEMENT STUDY OF STABLE CRACK-GROWTH IN SUPERELASTIC SHAPE MEMORY ALLOYS.  1-7. 2012
• A STUDY OF ACTUATION FATIGUE OF SHAPE MEMORY ALLOY.  287-293. 2012
• ANALYTICAL SOLUTION FOR PSEUDOELASTIC RESPONSE OF A SHAPE MEMORY ALLOY THICK-WALLED CYLINDER UNDER INTERNAL PRESSURE.  223-236. 2012
• APPLICATION OF SMA ACTUATORS TO SPACESUIT GLOVE MOBILITY.  375-381. 2012
• Adaptive Control of Nonminimum Phase Systems Using Sensor Blending With Application to Launch Vehicle Control.  259-270. 2012
• Adaptive Disturbance Tracking Control With Wind Speed Reduced Order State Estimation for Region II Control of Large Wind Turbines.  329-333. 2012
• Experimental Validation of Simultaneous Gust Alleviation and Energy Harvesting for Multifunctional Composite Wing Spars.  193-200. 2012
• INFLUENCE OF THE LATENT HEAT OF TRANSFORMATION AND THERMOMECHANICAL COUPLING ON THE PERFORMANCE OF SHAPE MEMORY ALLOY ACTUATORS.  237-248. 2012
• MODE I STEADY CRACK-GROWTH IN SUPERELASTIC SHAPE MEMORY ALLOYS.  33-38. 2012
• Robust Adaptive Control of Mildly Nonlinear Systems With Time Varying Input/Output Delays.  271-279. 2012
• Sensorless Control of SMA Using Seebeck Voltage.  Volume 2: Mechanics and Behavior of Active Materials; Integrated System Design and Implementation; Bio-Inspired Materials and Systems; Energy Harvesting. 367-373. 2012
• Thermodynamic Modeling of Ionic Polymer-Metal Composite Beams.  205-211. 2012
• A GENETIC ALGORITHM APPROACH FOR TECHNOLOGY CHARACTERIZATION.  777-788. 2012
• A METHODOLOGY FOR THE COMPREHENSIVE ASSESSMENT OF INTERNATIONAL PROCUREMENT COSTS.  517-527. 2012
• Handy-Potter: Rapid 3D Shape Exploration Through Natural Hand Motions.  19-28. 2012
• A Preliminary Study of the MSFR Dynamics.  229-238. 2012
• AUTONOMOUS CORIUM REACTOR FOR TERRESTRIAL APPLICATIONS.  667-680. 2012
• Analysis of the MSFR Core Neutronics Adopting Different Neutron Transport Models.  219-228. 2012
• Integrated Multi-Modular Fast Reactor Concept Design.  713-724. 2012
• ON THE IMMERSED BOUNDARY METHOD: FINITE ELEMENT VERSUS FINITE VOLUME APPROACH.  535-547. 2012
• Preliminary Analysis of the MSFR Fuel Cycle Using Modified-EQL3D Procedure.  293-302. 2012
• REACTOR CAVITY COOLING SYSTEM FACILITY SHAKEDOWN AND RELAP5-3D MODEL VALIDATION.  775-782. 2012
• Risk-Informed and Defense-in-Depth Oriented Plant Design Approach.  407-422. 2012
• SENSITIVITY STUDY OF THE SOUTH TEXAS PROJECT POWER PLANT STEADY-STATE SIMULATIONS USING RELAP5-3D COUPLED WITH DAKOTA.  595-602. 2012
• Characterization of the Behavior of Confined Laminar Round Jets.  ASME -Publications- Fed. 1037-1046. 2012
• EFFECT OF IMPINGEMENT SUPPLY CONDITION ON LEADING EDGE HEAT TRANSFER WITH ROUNDED IMPINGING JETS.  841-850. 2012
• EXPERIMENTAL INVESTIGATION OF HEAT TRANSFER IN A LEADING EDGE, TWO-PASS SERPENTINE PASSAGE AT HIGH ROTATION NUMBERS.  827-839. 2012
• EXPERIMENTAL INVESTIGATION OF MICROEXPLOSION PHENOMENA IN EMULSIFIED VEGETABLE OIL-METHANOL BLENDS.  205-212. 2012
• FLUID FLOW MIXING OF TURBULENT JETS WITHIN A STAGGERED ROD BUNDLE.  Proceedings of the ASME Fluids Engineering Division Summer Meeting. 1177-1182. 2012
• THERMAL PERFORMANCE OF POLY ALPHA OLEFIN NANOFLUID WITH SPHERICAL AND NON-SPHERICAL NANOPARTICLES.  675-683. 2012
• Thrust Measurements and Flow Field Analysis of a Piezoelectrically Actuated Oscillating Cantilever.  ASME -Publications- Fed. 799-807. 2012
• A Simplified Micromechancial Model for Analyzing Viscoelastic-Viscoplastic Response of Unidirectional Fiber Compositese.  Journal of Engineering Materials and Technology. 031003. 2012
• AERO-ELASTIC-FLOATER-MOORING COUPLED DYNAMIC ANALYSIS OF FOWT (FLOATING OFFSHORE WIND TURBINE) IN MAXIMUM OPERATION AND SURVIVAL CONDITIONS.  529-537. 2012
• CRACK GROWTH TESTING OF AN X80 PIPELINE GIRTH WELD USING SE(T) AND SE(B) FRACTURE SPECIMENS.  43-53. 2012
• HARNESSING CHAOTIC FLOW EFFECTS IN MICROSCALE NATURAL CONVECTION TO ACHIEVE ACCELERATED BIOCHEMISTRY.  419-422. 2012
• INFLUENCE OF COOLANT DENSITY ON TURBINE BLADE FILM-COOLING WITH AXIAL SHAPED HOLES.  757-767. 2012
• Numerical Analysis of Hydrodynamic Performance of Backward Bent Duct Buoy (BBDB).  669-674. 2012
• SIMULATIONS AND ANALYSIS OF SHOCK ACCELERATED INHOMOGENOUS FLOWS WITH AND WITHOUT RESHOCK.  Proceedings of the ASME Fluids Engineering Division Summer Meeting. 1047-1053. 2012
• COMPUTATIONAL INVESTIGATION OF JET IMPINGEMENT ON TURBINE BLADE LEADING EDGE COOLING WITH ENGINE-LIKE TEMPERATURES.  311-+. 2012
• EFFECT OF COOLING FLOW ON THE OPERATION OF A HOT ROTOR-GAS FOIL BEARING SYSTEM.  497-+. 2012
• IMPINGEMENT HEAT TRANSFER ENHANCEMENT ON A CYLINDRICAL, LEADING EDGE MODEL WITH VARYING JET TEMPERATURES.  323-+. 2012
• IMPINGEMENT HEAT TRANSFER ON A CYLINDRICAL, CONCAVE SURFACE WITH VARYING JET GEOMETRIES.  335-+. 2012
• LAMINAR FLAME SPEED AND IGNITION DELAY TIME DATA FOR THE KINETIC MODELING OF HYDROGEN AND SYNGAS FUEL BLENDS.  931-+. 2012
• MEASUREMENT VERSUS PREDICTIONS OF ROTORDYNAMIC COEFFICIENTS OF A HOLE-PATTERN GAS SEAL WITH NEGATIVE PRESWIRL.  2155-+. 2012
• A METAL MESH FOIL BEARING AND A BUMP-TYPE FOIL BEARING: COMPARISON OF PERFORMANCE FOR TWO SIMILAR SIZE GAS BEARINGS.  859-+. 2012
• DAMPING AND INERTIA COEFFICIENTS FOR TWO OPEN ENDS SQUEEZE FILM DAMPERS WITH A CENTRAL GROOVE: MEASUREMENTS AND PREDICTIONS.  769-778. 2012
• Design and Validation of Fault Diagnoser Based on Finite State Automaton and Sequential Function Chart for PLC Based Manufacturing System.  213-222. 2012
• HEAT TRANSFER IN ROTATING MULTI-PASS RECTANGULAR RIBBED CHANNEL WITH AND WITHOUT A TURNING VANE.  435-+. 2012
• IDENTIFICATION OF BEARING STIFFNESS AND DAMPING COEFFICIENTS USING PHASE-PLANE DIAGRAMS.  731-+. 2012
• IGNITION DELAY TIME AND LAMINAR FLAME SPEED CALCULATIONS FOR NATURAL GAS/HYDROGEN BLENDS AT ELEVATED PRESSURES.  1005-+. 2012
• IMPROVING TILTING-PAD JOURNAL BEARING PREDICTIONS: PART I - MODEL DEVELOPMENT AND IMPACT OF ROTOR-EXCITED VERSUS BEARING-EXCITED IMPEDANCE COEFFICIENTS.  965-+. 2012
• IMPROVING TILTING-PAD JOURNAL BEARING PREDICTIONS: PART II - COMPARISON OF MEASURED AND PREDICTED ROTOR-PAD TRANSFER FUNCTIONS FOR A ROCKER-PIVOT TILTING-PAD JOURNAL BEARING.  979-+. 2012
• INFLUENCE OF COOLANT DENSITY ON TURBINE BLADE FILM-COOLING WITH COMPOUND-ANGLE SHAPED HOLES.  1559-1569. 2012
• Machining Process Power Monitoring: Bayesian Update of Machining Power Model.  745-752. 2012
• Numerical Investigation of the Effect of Purge Flow on Aerodynamic Performance and Film Cooling Effectiveness on a Rotating Turbine with Non-Axisymmetric Endwall Contouring.  413-423. 2012
• ON THE EFFECT OF THERMAL ENERGY TRANSPORT TO THE PERFORMANCE OF (SEMI)FLOATING RING BEARING SYSTEMS FOR AUTOMOTIVE TURBOCHARGERS.  561-570. 2012
• ONE EXPLANATION FOR 2N RESPONSE DUE TO MISALIGNMENT IN ROTORS CONNECTED BY FLEXIBLE COUPLINGS.  563-+. 2012
• Optimization of Film Cooling Holes on the Suction Surface of a High Pressure Turbine Blade.  1683-1693. 2012
• ROTORDYNAMICS OF A 2-PHASE FLOW TWIN SCREW PUMP.  711-720. 2012
• Rotordynamic Characteristics of a Flexure Pivot Pad Bearing With an Active and Locked Integral Squeeze Film Damper.  551-561. 2012
• STATIC AND ROTORDYNAMIC CHARACTERISTICS FOR A NEW HOLE-PATTERN ANNULAR GAS SEAL DESIGN INCORPORATING LARGER DIAMETER HOLES.  759-+. 2012
• TILTING PAD JOURNAL BEARINGS - A DISCUSSION ON STABILITY CALCULATION, FREQUENCY DEPENDENCE, AND PAD AND PIVOT FLEXIBILITY.  991-+. 2012
• The Correlation of Volumetric Tool Wear and Wear Rate of Machining Tools With the Material Removal Rate of Titanium Alloys.  387-396. 2012
• A NEW NONLINEAR HIGHER-ORDER SHEAR DEFORMATION THEORY FOR NONLINEAR VIBRATIONS OF LAMINATED SHELLS.  1017-1025. 2012
• A Novel Bulk-Flow Model for Improved Predictions of Force Coefficients in Grooved Oil Seals Operating Eccentrically.  499-509. 2012
• A PHYSICS-BASED FRETTING MODEL WITH FRICTION AND INTEGRATION TO A SIMPLE DYNAMICAL SYSTEM.  1301-1307. 2012
• AERODYNAMIC INVESTIGATION OF THE PERFORMANCE OF A TWO STAGE AXIAL TURBINE AT DESIGN AND OFF-DESIGN CONDITIONS.  775-785. 2012
• AN IMPROVED SUPPORT VECTOR DOMAIN DESCRIPTION METHOD FOR MODELING VALID SEARCH DOMAINS IN ENGINEERING DESIGN PROBLEMS.  741-751. 2012
• APPLICATION OF SEMI-EMPIRICAL PROBABILITY DISTRIBUTIONS IN WAVE-STRUCTURE INTERACTION PROBLEMS.  Proceedings of the ASME Fluids Engineering Division Summer Meeting. 1541-1549. 2012
• An Elastic-plastic Spherical Contact Model under Combined Normal and Tangential Loading.  289-+. 2012
• An Information-Theoretic Metric of System Complexity With Application to Engineering System Design.  Journal of Mechanical Design. 100906. 2012
• BONE RESPONSE TO EXERCISE DURING RECOVERY BETWEEN UNLOADING BOUTS IN ADULT MALE RATS.  47-48. 2012
• CATCHER BEARING LIFE PREDICTION USING A RAINFLOW COUNTING APPROACH.  233-235. 2012
• CHARACTERIZING THE EFFECT OF DOMAIN DISTANCE IN DESIGN-BY-ANALOGY.  141-151. 2012
• COMPUTATIONAL DESIGN OF A RECONFIGURABLE ORIGAMI SPACE STRUCTURE INCORPORATING SHAPE MEMORY ALLOY THIN FILMS.  277-285. 2012
• DESIGN OF BEND-AND-SWEEP COMPLIANT MECHANISM FOR PASSIVE SHAPE CHANGE.  545-553. 2012
• DEVELOPING A MODEL FOR MASS TRANSPORT OF NITRIC OXIDE IN THE LYMPHATIC SYSTEM.  343-344. 2012
• DEVELOPING A TAXONOMY OF RISK-MITIGATING ACTIONS FROM A LEGACY DATABASE OF A LARGE DESIGN ORGANIZATION.  497-+. 2012
• DEVELOPMENT OF DIAGNOSTIC ALGORITHMS FOR AN AIR BRAKE SYSTEM THEORY AND IMPLEMENTATION.  327-334. 2012
• Dependence of Cyclic Stretch-Induced Stress Fiber Reorientation on Stretch Waveform.  327-328. 2012
• Development of Localized, Light-Weight Pressurization Mechanisms: Approach, Feasibility, and Impact.  621-626. 2012
• Dynamic Characterization of Tilting Pad Journal Bearings From Component and System Level Testing.  1007-1016. 2012
• EFFECT OF RIB SPACING ON HEAT TRANSFER IN A TWO PASS RECTANGULAR CHANNEL (AR=2:1) AT HIGH ROTATION NUMBERS.  1329-1339. 2012
• EFFECT OF WALL SHEAR STRESS ON ABDOMINAL AORTIC ANEURYSM EXPANSION: STUDY WITH LONGITUDINAL PATIENT IMAGES.  899-900. 2012
• EFFICIENT SAMPLING METHODS FOR TRADEOFF STUDIES UNDER UNCERTAINTY.  1187-1199. 2012
• EVALUATING THE DIRECTED METHOD FOR BIOINSPIRED DESIGN.  403-+. 2012
• EXPERIMENTAL INVESTIGATION OF HEAT TRANSFER CHARACTERISTICS OF PSEUDOCRITICAL CARBON DIOXIDE IN A CIRCULAR HORIZONTAL TUBE.  297-302. 2012
• FINITE ELEMENT ANALYSIS FOR NONLINEAR TIME DEPENDENT RESPONSE OF PIEZOELECTRIC MATERIALS.  591-592. 2012
• HEAT TRANSFER PERFORMANCE OF SIO2-WATER NANOFLUID IN A PLATE HEAT EXCHANGER.  267-272. 2012
• HIGH SPEED NON-LINEAR MICRO-MILLING DYNAMICS.  345-352. 2012
• IMPROVEMENT IN LEAN HOMOGENOUS SPARK-IGNITION COMBUSTION WITH PULSED ENERGY SPARK PLUG.  439-+. 2012
• INFLUENCE OF SHOCK WAVE ON TURBINE VANE SUCTION SIDE FILM COOLING WITH COMPOUND-ANGLE SHAPED HOLES.  447-457. 2012
• INORGANIC AND ORGANIC HYBRID MATERIALS FOR IMPROVING THERMOELECTRIC PERFORMANCE OF POLYMER NANOCOMPOSITES.  353-356. 2012
• Influence of Nanoparticles on the Thermoelectric Properties of Magnesium Silicides.  959-962. 2012
• MECHANIX: A SKETCH RECOGNITION TRUSS TUTORING SYSTEM.  645-654. 2012
• METAL MESH FOIL BEARING: EFFECT OF MOTION AMPLITUDE, ROTOR SPEED, STATIC LOAD, AND EXCITATION FREQUENCY ON FORCE COEFFICIENTS.  465-476. 2012
• MODELING OF HYBRID SHAPE MEMORY ALLOY COMPOSITES INCORPORATING MAX PHASE CERAMICS.  69-77. 2012
• Motion Response Control of the DWSC Spar Based on State-Space Model.  447-451. 2012
• NUMERICAL AND EXPERIMENTAL INVESTIGATIONS OF AN ORIFICE TYPE CRYOGENIC PULSE TUBE REFRIGERATOR.  1105-1113. 2012
• NUMERICAL INVESTIGATION OF SLIP FLOW AND HEAT TRANSFER IN ROTATING RECTANGULAR MICROCHANNELS.  1087-1094. 2012
• ON THE NONLINEAR DYNAMICS OF ROTOR-FOIL BEARING SYSTEMS: EFFECTS OF SHAFT ACCELERATION, MASS IMBALANCE AND BEARING MECHANICAL ENERGY DISSIPATION.  343-353. 2012
• PARAMETRIC STUDY OF BUMP FOIL GAS BEARINGS FOR INDUSTRIAL APPLICATIONS.  445-456. 2012
• ROTORYDNAMIC FORCE COEFFICIENTS OF BUBBLY MIXTURE ANNULAR PRESSURE SEALS.  477-486. 2012
• Robust Stabilization of Discrete Linear Time Varying Internal Model Based System.  153-161. 2012
• SYNTHESIS OF DIGITAL PID CONTROLLERS FOR DISCRETE-TIME SYSTEMS WITH GUARANTEED NON-OVERSHOOTING TRANSIENT RESPONSE.  473-478. 2012
• Surface Variation Reduction for Face Milling Based on High-Definition Metrology.  715-724. 2012
• TECHNOLOGY EVOLUTION MODELING AND DECISION MAKING UNDER UNCERTAINTY.  659-+. 2012
• THE EFFECT OF MICROSTRUCTURAL MORPHOLOGIES ON THE EFFECTIVE ELECTRO-MECHANICAL PROPERTIES OF PIEZOELECTRIC PARTICLE COMPOSITES.  621-623. 2012
• TOWARD CONSIDERING RISK ATTITUDES IN ENGINEERING ORGANIZATIONS USING UTILITY THEORY.  693-+. 2012
• TOWARDS HIGH ENERGY DENSITY, HIGH CONDUCTIVITY THERMAL ENERGY STORAGE COMPOSITES.  545-553. 2012
• Toward an Early-Phase Conceptual System Design Risk-Informed Decision Making Framework.  1777-1788. 2012
• Trough Type Concentrating Solar Power Plant Cost Assessment With Component Scaling.  529-536. 2012
• A CORRELATION BETWEEN THERMAL EFFICIENCY AND BIOLOGICAL NETWORK CYCLICITY.  1871-1877. 2012
• A NEW, ITERATIVE, SYNCHRONOUS-RESPONSE ALGORITHM FOR ANALYZING THE MORTON EFFECT.  271-281. 2012
• A NUMERICAL STUDY OF UNSTEADY LAMINAR FLOW AND HEAT TRANSFER THROUGH AN ARRAY OF ROTATING RECTANGULAR MICROCHANNELS.  1141-1145. 2012
• AN APPROXIMATION ALGORITHM FOR A HETEROGENEOUS TRAVELING SALESMAN PROBLEM.  637-644. 2012
• CONCEPTS IN BIOMIMETIC DESIGN: METHODS AND TOOLS TO INCORPORATE INTO A BIOMIMETIC DESIGN COURSE.  655-660. 2012
• CONTROL OF HIGH SPEED MILLING CHATTER IN SIMULTANEOUS TIME-FREQUENCY DOMAIN.  1371-1375. 2012
• Computational Fluid Dynamics Simulations of an Inertance type Pulse Tube Refrigerator.  989-995. 2012
• DESIGN OPTIMIZATION OF A SHAPE MEMORY ALLOY ACTUATED MORPHING AEROSTRUCTURE.  421-+. 2012
• DRY-FRICTION WHIP AND WHIRL PREDICTIONS FOR A ROTOR-STATOR MODEL WITH RUBBING CONTACT AT TWO LOCATIONS.  207-218. 2012
• Experimental and Numerical Characterization of an Orifice type Cryogenic Pulse Tube Refrigerator.  909-918. 2012
• FORMALIZING USER ACTIVITY - PRODUCT FUNCTION ASSOCIATION BASED DESIGN RULES FOR UNIVERSAL PRODUCTS.  539-556. 2012
• FRICTION FACTOR BEHAVIOR FROM FLAT-PLATE TESTS OF 12.15 mm DIAMETER HOLE-PATTERN ROUGHENED SURFACES.  247-255. 2012
• HEAT TRANSFER ENHANCEMENT IN A RECTANGULAR (AR=3:1) CHANNEL WITH V-SHAPED DIMPLES.  1505-1516. 2012
• IDENTIFICATION OF POTENTIAL STATEWIDE INTERCITY RAIL AND BUS TRANSIT CORRIDORS IN TEXAS.  497-505. 2012
• IDENTIFYING PRODUCT SCALING PRINCIPLES: A STEP TOWARDS ENHANCING BIOMIMETIC DESIGN.  789-798. 2012
• Impedance-Based Void Fraction Measurement and Flow Regime Identification in Microchannel Flows.  193-202. 2012
• MEASURED STATIC AND ROTORDYNAMIC COEFFICIENT RESULTS FOR A ROCKER-PIVOT, TILTING-PAD BEARING WITH 50 AND 60% OFFSETS.  237-246. 2012
• METHODS FOR SUPPORTING BIOINSPIRED DESIGN.  737-744. 2012
• MICROFLOW CYTOMETER: HYDRODYNAMIC FOCUSING AND SEPARATION OF SAMPLE STREAM.  291-296. 2012
• Nanoscale direct patterning with a combination of micro zone plates and pulsed light sources.  67-76. 2012
• TECHNOLOGY CHARACTERIZATION MODELS AND THEIR USE IN DESIGNING COMPLEX SYSTEMS.  1063-1075. 2012
• TURBULENT CONVECTION FROM DETERMINISTIC ROUGHNESS DISTRIBUTIONS WITH VARYING THERMAL CONDUCTIVITIES.  1043-1055. 2012
• EFFECTS OF EDEMAGENIC STRESS ON LYMPH TRANSPORT IN THE RAT MESENTERY.  1329-1330. 2011
• Impact of Aortic Prosthetic Heart Valve Dysfunction on Left Ventricular Afterload and on the Accuracy of Echo-Doppler Measurements.  189-190. 2011
• Nitric Oxide Transport in Lymphatic Vessels.  223-224. 2011
• Smoothed Particle Hydrodynamics Simulation of Flow Through a Bileaflet Mechanical Heart Valve: Advantages and Prospects.  221-222. 2011
• ADVANCED MOX AND IMF FUEL ASSEMBLY DESIGNS FOR MULTI-RECYCLING TRANSURANICS.  879-885. 2011
• AN ANALYTICAL MODEL TO PREDICT NITRIC OXIDE CONCENTRATION AND SOOT EMISSIVITY IN A DIESEL ENGINE.  American Society of Mechanical Engineers, Internal Combustion Engine Division (Publication) ICE. 883-891. 2011
• ASSESSMENT OF CURRENT CHEMILUMINESCENCE KINETICS MODELS AT ENGINE CONDITIONS.  817-825. 2011
• Assessment of Minimally Invasive Device That Provides Simultaneous Adjustable Cardiac Support and Active Synchronous Assist in an Acute Heart Failure Model.  169-170. 2011
• Comparisons of Global Heat Transfer Correlations for Conventional and High Efficiency Reciprocating Engines.  American Society of Mechanical Engineers, Internal Combustion Engine Division (Publication) ICE. 327-337. 2011
• Design and Control of a Compact Light-Weight Planar Positioner Moving Over a Concentrated-Field Magnet Matrix.  9-16. 2011
• EFFECT OF NON UNIFORM OUT-OF-PLANE ILLUMINATION AND SHEAR RATE ON THE ACCURACY OF nPIV VELOCITY MEASUREMENTS.  681-689. 2011
• Effect of GTL-like Jet Fuel Composition on GT Engine Altitude Ignition Performance - Part I: Combustor operability.  485-494. 2011
• Endwall Contouring Using Continuous Diffusion: A Breakthrough Method and its Application to a Three-Stage High Pressure Turbine.  787-797. 2011
• Experimental Study of a Negatively Buoyant Horizontal Jet in Wave Environment.  191-+. 2011
• Finite Element Modeling of the Workpiece Thermal Distortion in MQL Deep-Hole Drilling.  191-196. 2011
• INVESTIGATION OF GTL-LIKE JET FUEL COMPOSITION ON GT ENGINE ALTITUDE IGNITION AND COMBUSTION PERFORMANCE PART II: DETAILED DIAGNOSTICS.  507-517. 2011
• Influence of Unsteady Wake With Trailing Edge Coolant Ejection on Turbine Blade Film Cooling.  435-445. 2011
• Laminar Flame Speed Measurements and Modeling of Alkane Blends at Elevated Pressures With Various Diluents.  129-140. 2011
• MOLECULARLY THIN LUBRICANT LAYER CONTACT MODEL ACCOUNTING FOR INTERFACIAL SLIP.  397-399. 2011
• ON THE RELATIONSHIP BETWEEN FUEL INJECTION PRESSURE AND TWO-STAGE IGNITION BEHAVIOR OF LOW TEMPERATURE DIESEL COMBUSTION.  American Society of Mechanical Engineers, Internal Combustion Engine Division (Publication) ICE. 383-389. 2011
• On the Volumetric Assessment of Tool Wear in Machining Inserts With Complex Geometries: Need, Methodology and Validation.  313-322. 2011
• Particulate Matter Emissions from Late Injection High EGR Low Temperature Diesel Combustion.  American Society of Mechanical Engineers, Internal Combustion Engine Division (Publication) ICE. 373-381. 2011
• Pulsed Laser Micro Polishing: An Analytical Method for Predicting Surface Finish.  409-417. 2011
• Rotordynamic Force Coefficients for Three Types of Annular Gas Seals With Inlet Preswirl and High Differential Pressure Ratio.  511-522. 2011
• Stretch-Induced Stress Fiber Remodeling and MAPK Activations Depend on Mechanical Strain Rate.  467-468. 2011
• THE INTERACTION OF TSUNAMIS WITH OCEAN SWELL: AN EXPERIMENTAL STUDY.  747-754. 2011
• TRIBOLOGICAL PERFORMANCE OF POLYMER-BASED COATINGS FOR OIL-LESS PISTON-TYPE COMPRESSOR APPLICATIONS.  65-67. 2011
• The Direction of Cyclic Stretch-Induced Stress Fiber Orientation Depends on Matrix Rigidity.  949-950. 2011
• Thermal Properties of Green Roof Media During Plant Establishment and Growth.  1903-1908. 2011
• VELOCITY, PRESSURE, AND DAM-BREAK SIMILARITY OF GREEN WATER FLOW ON A 3D STRUCTURE.  19-26. 2011
• A New Robustness Theorem for the Adaptive Control of Nonlinear Systems.  51-54. 2011
• A Simple Analytical Model for Specific Heat of Nanofluid With Tube Shaped and Disc Shaped Nanoparticles.  t30023-t30023-6. 2011
• A Study on the Performance and Emissions Characteristics of a DI Compression Ignition Engine Operated With LPG and DTBP Blending Fuels.  American Society of Mechanical Engineers, Internal Combustion Engine Division (Publication) ICE. 295-306. 2011
• ADVANCES IN INVERSE TRANSPORT METHODS.  721-727. 2011
• ANALYSIS OF RCCS HEAT EXCHANGE FOR BENCHMARKING OF CFD CODES.  835-+. 2011
• APIX: Analysis From Pixellated Inputs in Early Design Using a Pen-Based Interface.  717-726. 2011
• CHARACTERIZATION OF A DUAL CHAMBERED TWO PHASE SEPARATOR.  1893-+. 2011
• Case Study for Energy-Efficiency of Liquid-Cooled Data Centers.  t10091-t10091-7. 2011
• Correlation Between Impulse and Compliance Based Methods in Rigid Body Collisions.  267-273. 2011
• DESIGN OPTIMIZATION OF A COMPLIANT SPINE FOR DYNAMIC APPLICATIONS.  743-752. 2011
• Design and Implementation of an Ionic-Polymer-Metal-Composite Aquatic Biomimetic Robot.  411-418. 2011
• EFFECTS OF WELD STRENGTH MISMATCH ON J AND CTOD ESTIMATION PROCEDURES FOR SENT FRACTURE SPECIMENS BASED ON PLASTIC ETA-FACTORS.  201-211. 2011
• EXPERIMENTAL STUDY OF TEMPERATURE SENSITIVE DYES FOR PLANAR LASER INDUCED FLUORESCENCE THERMOMETER.  343-+. 2011
• Enhancement of Saturation Boiling of PF-5060 on Microporous Surface.  t10195-t10195-9. 2011
• Evolving Systems: Adaptive Key Component Control With Persistent Disturbance Rejection.  813-820. 2011
• Experimental Investigation of Louver Cooling Scheme on Gas Turbine Vane Suction Side.  315-323. 2011
• Experimental Investigation of Molten Salt Nanofluid for Solar Thermal Energy Application.  t30024-t30024-6. 2011
• Experimental Investigation of Two-Phase Flow in a Multi-Branch Reduced T-Junction With Co-Current Stratified Gas-Liquid Flow.  t10199-t10199-7. 2011
• Experimental Investigation of a Scaled-Up Passive Curved Channel Micromixer With Slanted Grooves.  111-117. 2011
• Experimental Investigation of a Scaled-Up Passive Interdigital Micromixer With Circular-Sector Mixing Elements.  t10118-t10118-6. 2011
• Experimental Study of Thermal Performance of Nanofluids During Flow in Microchannels Using Surface Temperature-Nano-Sensors.  t10125-t10125-6. 2011
• Experimental Turbulence Analysis of Fuel Bundle with Spacer Grids.  913-922. 2011
• Experimental investigation of Reactor Cavity Cooling System (RCCS) for a very high temperature reactor (VHTR).  729-738. 2011
• Film Cooling Effectiveness Distributions on a Flat Plate With a Double Hole Geometry Using PSP.  t10103-t10103-10. 2011
• Heat Transfer Analysis of a Novel Piezoelectric Air Pump.  t10145-t10145-10. 2011
• Interfacial Thermal Resistance Between a Carbon Nanoparticle and Molten Salt Eutectic: Effect of Material Properties, Particle Shapes and Sizes.  t30084-t30084-7. 2011
• Investigation of Cooling Performance of a Swirl Microchannel Heat Sink by Numerical Simulation.  463-469. 2011
• Kinematics and Dynamics of a Sliding/Bouncing Two Mass System.  237-246. 2011
• LARGE EDDY SIMULATIONS OF JET FLOW INTERACTION WITHIN STAGGERED ROD BUNDLES.  681-691. 2011
• Numerical Simulation of a Novel Jet-Impingement Micro Heat Sink With Cross Flow Under Non Uniform Heating Condition.  441-449. 2011
• Numerical Study of Microchannel Heat Sinks With Non-Uniform Heat Flux Conditions.  87-93. 2011
• PIV Investigation of the Effect of Freestream Turbulence Intensity on Film Cooling From Fanshaped Holes.  493-507. 2011
• SIMULATION AND CONTROL DESIGN FOR SHAPE MEMORY ALLOY TORQUE TUBES.  303-313. 2011
• TESTING OF NOVEL COMPLIANT SPINES FOR PASSIVE WING MORPHING.  733-742. 2011
• TIME-DOMAIN SIMULATION OF MULTIBODY FLOATING SYSTEMS BASED ON STATE-SPACE MODELING TECHNOLOGY.  857-867. 2011
• Whole-Field Temperature and Velocity Measurements for Two-Phase Flow Using PIV/LIF.  t10100-t10100-11. 2011
• DYNAMIC RESPONSE OF A ROTOR-HYBRID GAS BEARING SYSTEM DUE TO BASE INDUCED PERIODIC MOTIONS.  81-90. 2010
• EFFECT OF DENSITY RATIO ON FLAT PLATE FILM COOLING WITH SHAPED HOLES USING PSP.  1691-1702. 2010
• EFFECT OF FREESTREAM TURBULENCE INTENSITY ON FILM COOLING JET STRUCTURE AND SURFACE EFFECTIVENESS USING PIV AND PSP.  1703-1718. 2010
• Unsteady Tip Leakage Flow Characteristics and Heat Transfer on Turbine Blade Tip and Casing.  2353-2362. 2010
• Measurements of Drag Torque, Lift-Off Journal Speed, and Temperature in a Metal Mesh Foil Bearing.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 112503-1752. 2010
• Vertical Riser VIV Simulation in Uniform Current.  Journal of Offshore Mechanics and Arctic Engineering: Transactions of the ASME. 031101-1376. 2010
• A NEW ANALYSIS TOOL ASSESSMENT FOR ROTORDYNAMIC MODELING OF GAS FOIL BEARINGS.  135-145. 2010
• AN ANALYSIS OF THERMO-MECHANICAL BEHAVIOR IN A MULTILAYER COMPOSITE PIPE UNDER TEMPERATURE VARIATION.  ASME -Publications- Pvp. 367-377. 2010
• AN ASSESSMENT OF THE THERMODYNAMICS ASSOCIATED WITH HIGH-EFFICIENCY ENGINES.  American Society of Mechanical Engineers, Internal Combustion Engine Division (Publication) ICE. 301-317. 2010
• AN IMPROVED ELASTIC CONTACT MODEL ACCOUNTING FOR ASPERITY INTERACTION AND BULK SUBSTRATE DEFORMATION.  317-319. 2010
• APPLICATION OF A NEW SEMI-ACTIVE CONTROL STRATEGY TO DYNAMIC RESPONSE CONTROL OF AN OFFSHORE PLATFORM USING MR DAMPERS.  731-736. 2010
• ASYMPTOTIC EXPANSION HOMOGENIZATION METHOD FOR CARBON FIBER COMPOSITE STRUCTURES REINFORCED WITH CARBON NANOTUBES.  291-292. 2010
• An Engineering-to-Biology Thesaurus for Engineering Design.  117-128. 2010
• Applied Tests of Design Skills: Divergent Thinking Data Analysis and Reliability Studies.  367-380. 2010
• BRAIN LIMBIC SYSTEM BASED ROBUST CONTROL FOR LANE CHANGE MANEUVER.  805-812. 2010
• COEXISTENCE OF CREEP AND TRANSFORMATION IN HIGH TEMPERATURE SHAPE MEMORY ALLOYS.  45-51. 2010
• COMBINATORIAL MOTION PLANNING FOR A DUBINS VEHICLE WITH PRECEDENCE CONSTRAINTS.  1627-1634. 2010
• COMPUTATIONAL AND IN VIVO ANALYSIS OF THE ROLE OF SOLID BIOMECHANICS IN THE DEVELOPMENT OF INTIMAL THICKENING POST-STENTING.  107-108. 2010
• Characteristics and Effects on a Machine-Tool Due to Grazing Motions of a Friction Boundary.  727-736. 2010
• DEVELOPING BIOMIMETIC GUIDELINES FOR THE HIGHLY OPTIMIZED AND ROBUST DESIGN OF COMPLEX PRODUCTS OR THEIR COMPONENTS.  307-321. 2010
• DYNAMICS OF POOL BOILING ON PLAIN AND NANOTUBE COATED SILICON SURFACES.  563-576. 2010
• EFFECT OF Cu CONTENT ON THE TRIBOLOGICAL PERFORMANCE OF Cr-N COATINGS AT HIGH TEMPERATURES (840 degrees C).  115-117. 2010
• EFFICIENCY CONSIDERATIONS OF LATER-PHASED LOW TEMPERATURE DIESEL COMBUSTION.  American Society of Mechanical Engineers, Internal Combustion Engine Division (Publication) ICE. 359-368. 2010
• ELECTRICAL IMPEDANCE SPECTROSCOPY MICROSYSTEM AS A TOOL FOR CANCER CELL ANALYSIS.  49-49. 2010
• ESTIMATION OF THE STRESSES APPLIED ON ANEURYSM WALL BY THE EXPANSION OF SHAPE MEMORY POLYMER FOAM.  579-580. 2010
• EXPERIMENTAL AND FEA SCRATCH CORRELATION OF MAGNETIC SIGNAL DEGRADATION IN MAGNETIC STORAGE THIN-FILM DISKS.  407-410. 2010
• EXPERIMENTAL AND NUMERICAL INVESTIGATIONS OF AERODYNAMIC BEHAVIOR OF A THREE-STAGE HP-TURBINE AT DIFFERENT OPERATING CONDITIONS.  1619-1632. 2010
• EXPERIMENTAL CHARACTERIZATION OF SINGLE AND MULTIPLE DROPLET IMPINGEMENT ON SURFACES SUBJECT TO CONSTANT HEAT FLUX CONDITIONS.  707-715. 2010
• Effects of Fluid Shear Stress on Endothelial Cell Invasion Into Three-Dimensional Matrices.  427-428. 2010
• Exploring the Use of Category and Scale to Scope a Biological Functional Model.  139-150. 2010
• FRICTION FACTOR BEHAVIOR FROM FLAT-PLATE TESTS OF SMOOTH AND HOLE-PATTERN ROUGHENED SURFACES WITH SUPPLY PRESSURES UP TO 84 BARS.  69-79. 2010
• Frictional Behavior of Boundary Lubricated Contacts - Effect of Tribochemical Surface Films.  79-81. 2010
• HEAT TRANSFER IN TRAILING EDGE WEDGE-SHAPED PIN-FIN CHANNELS WITH SLOT EJECTION UNDER HIGH ROTATION NUMBERS.  369-380. 2010
• IDENTIFICATION OF ROTORDYNAMIC FORCE COEFFICIENTS OF A METAL MESH FOIL BEARING USING IMPACT LOAD EXCITATIONS.  123-133. 2010
• IGNITION AND COMBUSTION OF HEAVY HYDROCARBONS USING AN AEROSOL SHOCK-TUBE APPROACH.  699-707. 2010
• INVESTIGATION OF FLOW BOILING ON NANOSTRUCTURED SURFACES.  577-582. 2010
• INVESTIGATION OF HIGH TEMPERATURE NANOFLUIDS FOR SOLAR THERMAL POWER CONVERSION AND STORAGE APPLICATIONS.  583-591. 2010
• INVESTIGATION OF INTERFACIAL THERMAL RESISTANCE ON NANO-STRUCTURES USING MOLECULAR DYNAMICS SIMUALTIONS.  427-431. 2010
• Identification and Prediction of Force Coefficients in a Five-Pad and Four-Pad Tilting Pad Bearing for Load-on-Pad and Load-Between-Pad Configurations.  463-472. 2010
• Impact of Frequency Dependence of Gas Labyrinth Seal Rotordynamic Coefficients on Centrifugal Compressor Stability.  1-10. 2010
• Influence of Channel Orientation on Heat Transfer in a Two-Pass Smooth and Ribbed Rectangular Channel (AR=2:1) Under Large Rotation Numbers.  53-65. 2010
• Influence of Coolant Density on Turbine Blade Film-Cooling Using Pressure Sensitive Paint Technique.  1529-1540. 2010
• LAMINAR FLAME SPEED MEASUREMENTS AND MODELING OF PURE ALKANES AND ALKANE BLENDS AT ELEVATED PRESSURES.  855-873. 2010
• LAMINAR FLOW FORCED CONVECTION HEAT TRANSFER BEHAVIOR OF A PHASE CHANGE MATERIAL FLUID IN MICROCHANNELS.  1305-1314. 2010
• LAMINAR FLOW FORCED CONVECTION HEAT TRANSFER BEHAVIOR OF PHASE CHANGE MATERIAL FLUID IN MICROCHANNELS WITH STAGGERED PINS.  69-78. 2010
• LIMITATIONS OF EMPLOYING UNDIRECTED INFORMATION FLOW GRAPHS FOR THE MAINTENANCE OF RIGID VEHICULAR FORMATIONS.  1643-1650. 2010
• Modeling of Newtonian Fluids in Annular Geometries With Inner Pipe Rotation.  ASME -Publications- Fed. 1453-1461. 2010
• Nonlinear NWT Simulation for Oscillating-Water-Column Wave Energy Converter.  679-684. 2010
• Numerical Analysis of a Floating Body With Two-Dimensional Moonpool Including Piston Mode.  807-815. 2010
• Organic Solar Cell With Carbon Nanotube Anode.  425-430. 2010
• PARAMETRIZATION OF LTI CONTROLLERS FOR MULTIRATE SYSTEMS.  539-546. 2010
• PREDICTION OF AEROACOUSTIC RESONANCE IN CAVITIES OF HOLE-PATTERN STATOR SEALS.  349-361. 2010
• REGULATION OF STRETCH-INDUCED MECHANOTRANSDUCTION BY CYTOSKELETAL TENSION.  347-348. 2010
• ROTOR-FLOATER-MOORING COUPLED DYNAMIC ANALYSIS OF MINI TLP-TYPE OFFSHORE FLOATING WIND TURBINES.  491-498. 2010
• Sensitivity of Steady State Intermittent Cutting Motion to Work-Piece Characteristics.  121-129. 2010
• Sensor Fault Diagnosis in Smart Structures.  41-48. 2010
• THE DESTRUCTION OF EXERGY DURING THE COMBUSTION PROCESS FOR A SPARK-IGNITION ENGINE.  American Society of Mechanical Engineers, Internal Combustion Engine Division (Publication) ICE. 717-731. 2010
• THERMAL MANAGEMENT AND ROTORDYNAMIC PERFORMANCE OF A HOT ROTOR-GAS FOIL BEARINGS SYSTEM. PART 1: MEASUREMENTS.  253-262. 2010
• THERMAL MANAGEMENT AND ROTORDYNAMIC PERFORMANCE OF A HOT ROTOR-GAS FOIL BEARINGS SYSTEM. PART 2: PREDICTIONS VERSUS TEST DATA.  263-271. 2010
• TIME-DOMAIN SIMULATION OF A MULTI-BODY FLOATING SYSTEM IN WAVES.  797-803. 2010
• TRIBOLOGICAL PERFORMANCE OF POLYMER COATINGS IN CARBON DIOXIDE REFRIGERANT ENVIRONMENT.  119-121. 2010
• Thermal Modeling of Workpiece Temperature in MQL Deep-Hole Drilling.  91-97. 2010
• Tracking Control of Periodic Signals With Varying Magnitude and Its Application to Hybrid Powertrain.  77-84. 2010
• Two-Dimensional Vessel-Motion/Liquid-Sloshing Interactions and Impact Loads by Using a Particle Method.  679-686. 2010
• UNIVERSAL PRODUCT FAMILY DESIGN VALUATION IN AN UNCERTAIN MARKET ENVIRONMENT.  891-900. 2010
• USING SUPPORT VECTOR MACHINES TO FORMALIZE THE VALID INPUT DOMAIN OF MODELS IN DATA-DRIVEN PREDICTIVE MODELING FOR SYSTEMS DESIGN.  1423-1436. 2010
• A COMPARATIVE STUDY OF INTERFACE SCHEMES IN THE IMMERSED BOUNDARY METHOD FOR A MOVING SOLID BOUNDARY PROBLEM USING THE LATTICE BOLTZMANN METHOD.  ASME -Publications- Fed. 2433-2440. 2010
• A DESIGN METHOD FOR DEVELOPING A UNIVERSAL PRODUCT FAMILY IN A DYNAMIC MARKET ENVIRONMENT.  941-950. 2010
• A HYBRID SENSITIVITY ANALYSIS FOR USE IN EARLY DESIGN.  175-187. 2010
• A Hybrid Model for Predicting Gas Entrainment in a Small Branch From a Co-Current Flowing Gas-Liquid Regime.  ASME -Publications- Fed. 1363-1371. 2010
• A MODAL APPROACH FOR CHAOTIC VIBRATIONS OF A DRILLSTRING.  1305-1314. 2010
• ADAPTING ADA ARCHITECTURAL DESIGN KNOWLEDGE TO PRODUCT DESIGN: GROUNDWORK FOR A FUNCTION BASED APPROACH.  185-200. 2010
• ANALYSIS OF SHAPE MEMORY ALLOY COMPONENTS USING BEAM, SHELL, AND CONTINUUM FINITE ELEMENTS.  295-305. 2010
• ANALYSIS OF TOPOGRAPHICAL CHANGES AND ADHESION FAILURES IN GOLD-TO-GOLD METAL RF MEMS SWITCHES WITH CYCLING.  13-15. 2010
• ASSESSING THE EFFECT OF INCENTIVE ON COMPUTER-AIDED DESIGN INTENT.  523-532. 2010
• An Experimental Investigation of Film Cooling Performance of Louver Scheme.  301-310. 2010
• Augmented Adaptive Control of Flexible Structures Using Residual Mode Filters.  401-405. 2010
• Bileaflet Prosthetic Heart Valve Disease: Numerical Approach Using 3-D Fluid-Structure Interaction Model With Realistic Aortic Root.  ASME -Publications- Fed. 1901-1906. 2010
• COMPUTATIONAL ANALYSIS OF FLUID FLOW IN PEBBLE BED MODULAR REACTOR USING DIFFERENT TURBULENCE MODELS.  ASME -Publications- Fed. 1617-1621. 2010
• CONCEPTUAL DESIGN OF A FORMULA HYBRID POWERTRAIN SYSTEM UTILIZING FUNCTIONALITY-BASED MODELING TOOLS.  419-+. 2010
• DESIGN OF A PASSIVELY MORPHING ORNITHOPTER WING USING A NOVEL COMPLIANT SPINE.  703-713. 2010
• DESIGN OF NOVEL NANOCOMPOSITE NITRIDE COATINGS FOR SEVERE TRIBOLOGICAL APPLICATIONS.  665-669. 2010
• DETERMINING THE OPTIMUM NUMBER OF RFID READERS FOR EFFICIENT ASSET TRACKING.  1323-1331. 2010
• DEVELOPMENT AND TESTING OF AN AUTOMATED BUILDING COMMISSIONING ANALYSIS TOOL (ABCAT).  397-404. 2010
• DRILL STRING DYNAMICS: REDUCED-ORDER MODELS.  451-460. 2010
• Dynamic Analysis of Floating Bodies Considering Multi-Body Interaction Effects.  469-473. 2010
• EVAPORATOR SUPERHEAT REGULATION VIA EMULATION OF SEMI-ACTIVE FLOW CONTROL.  1377-1384. 2010
• EXAMINING THE EFFECTS OF CAD MODEL ATTRIBUTES ON ALTERATION TIME AND PROCEDURE.  297-+. 2010
• EXPERIMENTAL STRUCTURAL STIFFNESS AND DAMPING IN A 2(ND) GENERATION FOIL BEARING FOR INCREASING SHAFT TEMPERATURES.  209-211. 2010
• Exergetic Analysis of Solar-Powered Hybrid Energy Conversion and Storage Scenarios for Stationary Applications.  879-888. 2010
• Experimental Investigation of Film Cooling Effectiveness for a New Shaped Hole at the Leading Edge.  1495-1504. 2010
• Experimental Investigation of Louver Cooling Scheme on Gas Turbine Vane Pressure Side.  159-167. 2010
• Flow Induced Cylinder Oscillation and Its Control With High Order Spectral Difference Method on Deformable Mesh.  297-307. 2010
• INCORPORATING THE OPTION VALUE OF PRODUCT FAMILY VARIANTS IN MATERIAL AND PROCESS SELECTION.  1101-1109. 2010
• LARGE EDDY SIMULATIONS OF JET FLOW INTERACTION WITHIN STAGGERED ROD BUNDLES.  ASME -Publications- Fed. 1969-1979. 2010
• MULTIPLE IMPACT BASED ENERGY ABSORPTION.  475-482. 2010
• Numerical Investigation and Geometric Parameterization of Lamination Inlet of Passive Micromixer.  1213-1219. 2010
• Numerical Simulation of a Novel Passive Micromixer With Curved Channel and Slanted Grooves.  1203-1212. 2010
• Numerical Study of Film Cooling Scheme on a Blunt-Nosed Body in Hypersonic Flow.  267-276. 2010
• REPRESENTING USER ACTIVITY AND PRODUCT FUNCTION FOR UNIVERSAL DESIGN.  83-100. 2010
• Robust Adaptive Control of Nonlinear Systems With Input/Output Delays.  1033-1039. 2010
• STUDY OF HIGH TEMPERATURE NANOFLUIDS USING CARBON NANOTUBES (CNT) FOR SOLAR THERMAL STORAGE APPLICATIONS.  741-748. 2010
• SUSTAINABLE DISTRIBUTION DESIGN: CONTRASTING DISPOSABLE, RECYCLABLE, AND REUSABLE STRATEGIES FOR PACKAGING MATERIALS USING A TOTAL COST ANALYSIS WITH AN ILLUSTRATION OF MILK DISTRIBUTION.  417-425. 2010
• Thermohydrodynamic Model Predictions and Performance Measurements of Bump-Type Foil Bearing for Oil-Free Turboshaft Engines in Rotorcraft Propulsion Systems.  Journal of Tribology. 011701-1731. 2010
• UNSTEADY WAKE AND COOLANT DENSITY EFFECTS ON TURBINE BLADE FILM COOLING USING PSP TECHNIQUE.  227-237. 2010
• Validation of a Smoothed Particle Hydrodynamics Code for Internal Flow Simulations: Application to Hemodynamics in a Realistic Left Heart Cavity Model.  ASME -Publications- Fed. 355-360. 2010
• Subcooled Pool Boiling Experiments on Horizontal Heaters Coated With Carbon Nanotubes.  Journal of Heat Transfer: Transactions of the ASME. 071501-10. 2009
• LENGTH AND SEQUENCE DEPENDENCE OF THE ELASTICITY OF ALPHA HELICES AND COILED-COILS.  547-548. 2009
• MECHANICS OF DEFORMATION-INDUCED DEGRADATION OF POLY(L-LACTIC ACID) ENDOVACULAR STENTS.  13-14. 2009
• A Dynamic Stochastic Model of Frequency-Dependent Stress Fiber Alignment Induced by Cyclic Stretch.  PLoS One. 95-96. 2009
• A Kinematic Model Coupling Cytoskeletal Dynamics With JNK Activation in Response to Matrix Stretching.  91-92. 2009
• A Novel Automotive Transmission Clutch Control Mechanism.  619-626. 2009
• A THERMODYNAMICALLY BASED MODEL OF THE SUPERELASTIC BEHAVIOR OF SHAPE MEMORY ALLOYS USING A DISCRETE PREISACH MODEL.  277-282. 2009
• A TURBOCHARGED, SPARK-IGNITION ENGINE: RESULTS FROM AN ENGINE CYCLE SIMULATION INCLUDING THE SECOND LAW OF THERMODYNAMICS.  Proceedings of the Spring Technical Conference of the ASME Internal Combustion Engine Division. 505-519. 2009
• AN EXPERIMENTAL AND NUMERICAL STUDY OF THE EFFECTS OF FLOW INCIDENCE ANGLES ON THE PERFORMANCE OF A STATOR BLADE CASCADE OF A HIGH PRESSURE STEAM TURBINE.  821-830. 2009
• AN EXPERIMENTAL STUDY OF IN VITRO TRANSDERMAL DRUG DELIVERY ASSISTED BY CRYOPNEUMATIC TECHNOLOGY.  1259-1260. 2009
• APPLICATION OF ELASTIC-PLASTIC STATIC FRICTION MODEL TO ROUGH SURFACE WITH ASYMMETRIC ASPERITY DISTRIBUTION.  765-767. 2009
• BIODIESEL FUEL'S EFFECTS ON INFLUENCING PARAMETERS OF BRAKE FUEL CONVERSION EFFICIENCY IN A MEDIUM DUTY DIESEL ENGINE.  Proceedings of the Spring Technical Conference of the ASME Internal Combustion Engine Division. 101-114. 2009
• CHARACTERIZING STRAINS IN THE TIBIA OF HINDLIMB UNLOADED RATS DURING COMBINED ISOMETRIC AND ECCENTRIC STIMULATED MUSCLE CONTRACTION.  653-654. 2009
• COMPOSING TRADEOFF MODELS FOR MULTI-ATTRIBUTE SYSTEM-LEVEL DECISION MAKING.  993-1005. 2009
• CONSTITUTIVE MODELING OF MAGNETIC FIELD-INDUCED PHASE TRANSFORMATION IN NIMNCOIN MAGNETIC SHAPE MEMORY ALLOYS.  317-324. 2009
• CORRELATIONS OF THE DROPLET SIZE-VELOCITY OF THE TWO-PHASE, AIR/LIQUID SPRAY USING A PARTICLE-DYNAMIC-ANALYZER.  699-706. 2009
• Characteristics of Nanopatterns and the Associated Thermal Mechanisms During Near Field Laser-Material Interaction of Nanosecond Laser on Different Targets.  631-638. 2009
• DETERMINATION OF DIMENSIONALITY OF POOL BOILING ON A THIN HORIZONTAL DISK UNDER SUBCOOLED CONDTIONS USING THIN-FILM THERMOCOUPLES.  261-270. 2009
• DEVELOPING COMPUTATIONAL FLOW MODELS FOR THE LYMPHATIC VASCULATURE.  523-524. 2009
• DEVELOPMENT OF A MULTI-BODY VESSEL DYNAMICS SIMULATION TOOL.  843-849. 2009
• DUAL GRADIENT DRILLING WILL CONTROL SHALLOW HAZARDS IN DEEPWATER ENVIRONMENTS.  509-539. 2009
• DYNAMIC FORCED RESPONSE OF A ROTOR-HYBRID GAS BEARING SYSTEM DUE TO INTERMITTENT SHOCKS.  689-698. 2009
• Dry-Friction Whirl and Whip Between a Rotor and a Stator: Effect of Rotor-Stator Coupling Due to Seals and Rotor Rigid-Body Dynamics.  963-972. 2009
• EFFECT OF UPSTREAM STEP ON FLAT PLATE FILM COOLING EFFECTIVENESS USING PSP.  599-609. 2009
• ELASTIC/PLASTIC OBLIQUE IMPACT ANALYSIS FOR HEAD DISK INTERFACE OPERATIONAL SHOCK.  693-696. 2009
• ELASTOMERIC FENDER SYSTEMS SUBJECT TO RANDOM EXCITATION.  427-434. 2009
• Effect of Mechanical Preloads on the Dynamic Performance of Gas Foil Bearings.  379-381. 2009
• Effects of Chip Seizure on Steady State Motion of a Machine-Tool.  437-444. 2009
• Evaluating the Influence of Charge Motion Control on In-Cylinder Flow using MTV.  819-827. 2009
• Fluid Shear Stress Modulates S1P-Induced Endothelial Cell Invasion Into Three-Dimensional Matrices.  943-944. 2009
• Friction Factor Jump in Honeycomb Seals Explained by Flow-Acoustic Interactions.  1073-1080. 2009
• FunctionCAD: A Functional Modeling Application Based on the Function Design Framework.  591-600. 2009
• GAS BEARING TECHNOLOGY FOR OIL-FREE MICROTURBOMACHINERY - RESEARCH EXPERIENCE FOR UNDERGRADUATE (REU) PROGRAM AT TEXAS A&M UNIVERSITY.  845-857. 2009
• HEAT TRANSFER AND PRESSURE DROP MEASUREMENTS FOR A SQUARE CHANNEL WITH 45DEG ROUND EDGED RIBS AT HIGH REYNOLDS NUMBERS.  527-537. 2009
• HIGH ROTATION NUMBER EFFECTS ON HEAT TRANSFER IN A RECTANGULAR (AR=2:1) TWO PASS CHANNEL.  383-394. 2009
• Heat Transfer and Thermal Mechanical Stress Distributions in Gas Turbine Blades.  115-126. 2009
• High Rotation Number Effect on Heat Transfer in a Triangular Channel With 45, Inverted 45, and 90 Ribs.  127-138. 2009
• IDENTIFICATION OF SQUEEZE FILM DAMPER FORCE COEFFICIENTS FROM MULTIPLE-FREQUENCY, NON-CIRCULAR JOURNAL MOTIONS.  669-678. 2009
• IGNITION AND OXIDATION OF 50/50 BUTANE ISOMER BLENDS.  545-557. 2009
• Improvement of Surface Flatness in Face Milling by Varying the Tool Cutting Depth and Feed Rate.  73-79. 2009
• Influence of Coolant Density on Turbine Blade Platform Film-Cooling.  287-299. 2009
• Integrity of 3LPE Pipeline Coatings - Residual Stresses and Adhesion Degradation.  75-86. 2009
• MAGNETO-MECHANICAL FINITE ELEMENT ANALYSIS OF MAGNETIC SHAPE MEMORY ALLOYS WITH BODY FORCE AND BODY COUPLE.  481-490. 2009
• MEASUREMENT OF GREEN WATER ON A 3D STRUCTURE.  531-538. 2009
• MEASUREMENT OF STRUCTURAL STIFFNESS AND DAMPING COEFFICIENTS IN A METAL MESH FOIL BEARING.  763-771. 2009
• MULTIFUNCTIONAL MULTI-SCALE CARBON-FIBER/EPOXY MATRIX COMPOSITES REINFORCED WITH CARBON NANOTUBES.  153-160. 2009
• Nonlinear Identification of MIMO Smart Structures.  33-40. 2009
• PREDICTED ROTORDYNAMIC BEHAVIOR OF A LABYRINTH SEAL AS ROTOR SURFACE SPEED APPROACHES MACH 1.  699-709. 2009
• PROBABILITY DISTRIBUTIONS FOR WAVE RUNUP ON OFFSHORE PLATFORM COLUMNS.  607-615. 2009
• PROGRESSIVE MOORING-LINE FAILURE OF A DEEPWATER MODU IN HURRICANE CONDITIONS.  711-716. 2009
• RETROSPECTIVE TESTING OF AN AUTOMATED BUILDING COMMISSIONING ANALYSIS TOOL (ABCAT).  229-236. 2009
• ROTORDYNAMIC CHARACTERISTICS OF A 5 PAD, ROCKER-PIVOT, TILTING PAD BEARING IN A LOAD-ON-PAD CONFIGURATION; COMPARISONS TO PREDICTIONS AND LOAD-BETWEEN-PAD RESULTS.  867-880. 2009
• ROTORDYNAMIC FORCE COEFFICIENTS OF A HYBRID BRUSH SEAL: MEASUREMENTS AND PREDICTIONS.  613-620. 2009
• SIMULATIONS OF THE HINGE FLOW FIELDS OF A BILEAFLET MECHANICAL HEART VALVE UNDER PHYSIOLOGIC PULSATILE AORTIC CONDITIONS.  1093-1094. 2009
• SIZE EFFECT ON THE PHASE TRANSFORMATION OF IN-21AT%TL NANOWIRES.  327-333. 2009
• THE NUMERICAL AND EXPERIMENTAL CHARACTERISTICS OF MULTI-MODE DRY-FRICTION WHIP AND WHIRL.  785-794. 2009
• THERMAL CONDUCTIVITY OF ONE-DIMENSIONAL SILICON-GERMANIUM ALLOY NANOWIRES.  367-369. 2009
• THERMOHYDRODYNAMIC ANALYSIS OF BUMP TYPE GAS FOIL BEARINGS: A MODEL ANCHORED TO TEST DATA.  951-961. 2009
• TIME-RESOLVED STUDY OF LASER-INDUCED BUBBLES AND SHOCKWAVES IN AGAR GEL TISSUE PHANTOMS.  613-614. 2009
• TRIBOLOGICAL BEHAVIOR OF CrN AND Al-Cr-N COATINGS.  769-771. 2009
• TRIBOLOGY OF COATINGS FOR USE IN OIL-LESS SWASHPLATE COMPRESSORS.  501-508. 2009
• TURBOCHARGER NONLINEAR RESPONSE WITH ENGINE-INDUCED EXCITATIONS: PREDICTIONS AND TEST DATA.  637-647. 2009
• Tailoring Thermoelectric Properties of Segregated-Network Polymer Nanocomposites for Thermoelectric Energy Conversion.  165-167. 2009
• VERTICAL RISER VIV SIMULATION IN UNIFORM CURRENT.  395-405. 2009
• Volumetric Flank Wear Characterization for Titanium Milling Insert Tools.  97-104. 2009
• "USED FUEL" VECTORS AND WASTE MINIMIZATION STRATEGIES FOR VHTRs OPERATING WITHOUT REFUELING.  659-668. 2009
• A VIRTUAL FACTORY PLANNING AND ESTIMATION SYSTEM FOR ENGINEERING AND EDUCATION.  1473-1479. 2009
• ACTIVE LENGTH CONTROL OF SHAPE MEMORY ALLOY WIRES VIA REINFORCEMENT LEARNING.  267-276. 2009
• AUTONOMOUS CONTROL STRATEGIES FOR VHTR-BASED SYSTEMS FOR HYDROGEN PRODUCTION.  553-559. 2009
• BENCHMARK EFFORTS TO SUPPORT STUDIES OF ADVANCED VHTRs.  373-380. 2009
• CASING POINT SELECTION FOR DRILLING OPERATIONS AT SHALLOW DEPTHS.  547-558. 2009
• CFD SIMULATION OF A COOLANT FLOW AND A HEAT TRANSFER IN A PEBBLE BED REACTOR.  171-+. 2009
• Co-Current Stratified Gas-Liquid Flow in a Horizontal Pipe With Discharging Branches.  1795-1802. 2009
• Computational Study of the Effects of Shock Waves on Film Cooling Effectiveness.  855-866. 2009
• Direct Adaptive Rejection of Vortex-Induced Disturbances for a Powered Spar Platform.  487-497. 2009
• EFFECT OF MODEL ELEMENT FIDELITY WITHIN A COMPLEX FUNCTION-BASED BEHAVIORAL MODEL.  957-967. 2009
• EFFECT OF POLYMER CHAINS ON HEAT TRANSFER ON NANOFINS.  385-388. 2009
• ESTIMATION OF AVERAGE VOID FRACTION FOR GAS-LIQUID, TWO-PHASE FLOW IN AN INDUSTRIAL NOZZLE ASSEMBLY USING A QUICK-CLOSING-VALVE.  433-439. 2009
• EXPERIMENTAL STUDY OF JET FLOW IMPINGEMENT WITHIN A ROD BUNDLE USING PIV TECHNIQUE.  421-426. 2009
• Effect of Turbine Inlet Temperature on Blade Tip Leakage Flow and Heat Transfer.  1773-1782. 2009
• Effect of Turbulator Width and Spacing on the Thermal Performance of Angled Ribs in a Rectangular Channel (AR=3:1).  1103-1113. 2009
• Experimental Investigation of Flow Boiling Heat Transfer Characteristics of FC-72 in Cross-Linked Microchannel Heat Sinks Using Thermochromatic Liquid Crystals.  1-7. 2009
• Experimental Investigation of the Two-Phase Phenomena in a Small Discharge Installed on a Large Pipe With Stratified Gas-Liquid Flow.  839-849. 2009
• FATIGUE OF A NANOCOMPOSITE LAMINATE.  251-258. 2009
• Flow Field Analysis of a Single Piezoelectric Fan.  1429-1436. 2009
• Gait and Gait Transition for a Robot With Two Actuated Spoke Wheels.  1017-1025. 2009
• IMPROVED PREDICTION OF ELECTRODES' MASS LOADING EFFECT ON MEMS FBAR STRUCTURE IN LONGITUDINAL RESONANCE.  397-402. 2009
• Investigation of the Onset of Gas Entrainment in Dual Discharging Oriented Branches on a Curved Wall With Stratified Flow Using Stereo PIV.  871-879. 2009
• MEASUREMENT OF DETAILED HEAT TRANSFER COEFFICIENT AND FILM COOLING EFFECTIVENESS DISTRIBUTIONS USING PSP AND TSP.  807-817. 2009
• MEASUREMENTS OF FLOW MODIFICATION BY PARTICLE DEPOSITION INSIDE A PACKED BED USING TIME-RESOLVED PIV.  413-419. 2009
• MOLECULAR DYNAMICS SIMULATION OF INTERFACIAL THERMAL RESISTANCE OF NANOFINS.  123-127. 2009
• NUMERICAL SIMULATIONS OF JET FLOW MIXING WITHIN ROD BUNDLES.  159-165. 2009
• Non-Intrusive Experimental Investigation of Flow Behavior Inside a 5X5 Rod Bundle with Spacer Grids using PIV and MIR.  351-360. 2009
• Optical Characteristics of Nanoparticle Sintering and Coalescence for Electronics Fabrication.  579-587. 2009
• PREDICTING THE TWO-PHASE FLOW PATTERNS IMPLEMENTING THE FROUDE NUMBER CORRELATION.  427-431. 2009
• PROJECT BASED ACTIVITIES TO ATTRACT STUDENTS TO MARINE ENGINEERING AND TECHNOLOGY CAREERS.  233-+. 2009
• THERMOMECHANICAL CHARACTERISTICS OF SILICON WAFER IN RESPONSE TO ULTRAFAST LASER HEATING.  351-359. 2009
• THREE DIMENSIONAL SIMULATION OF RAYLEIGH-BENARD CONVECTION FOR RAPID MICROSCALE POLYMERASE CHAIN REACTION.  2109-2118. 2009
• THREE-DIMENSIONAL MODELING OF RATE-DEPENDENT DEFORMATION IN SHAPE MEMORY ALLOYS AT HIGH TEMPERATURES.  309-316. 2009
• TIME DOMAIN ANALYSIS OF THE TEMPERATURES IN AN ELECTRICAL AUXILIARY BUILDING ROOM.  579-586. 2009
• The Numerical Investigation of a New Passive Micromixer With Improved Tesla Structure.  789-795. 2009
• The Numerical Investigation of an Interdigital Micromixer With the Circular-Sector Obstacles.  209-216. 2009
• The Numerical Simulation of a Passive Interdigital Micromixer With Uneven Lamellar Width.  813-819. 2009
• VHTR-BASED SYSTEMS FOR AUTONOMOUS CO-GENERATION APPLICATIONS.  745-753. 2009
• Exploring the Use of Functional Models in Biomimetic Conceptual Design.  Journal of Mechanical Design. 121102-12110213. 2008
• Film cooling effectiveness distributions on a turbine blade cascade platform with stator-rotor purge and discrete film hole flows.  Journal of Turbomachinery. 031015. 2008
• Internal cooling near trailing edge of a gas turbine airfoil with cooling airflow through blockages with holes.  Journal of Turbomachinery. 031004. 2008
• Effect of a cutback squealer and cavity depth on film-cooling effectiveness on a gas turbine blade tip.  Journal of Turbomachinery. 021002-1413. 2008
• Investigation of contact stiffness and contact damping for magnetic storage head-disk interfaces.  Journal of Tribology. 021901. 2008
• A Case Study of Retrofitting a Demonstration Solar Energy Building.  649-655. 2008
• A Theoretical Model of Stretch-Induced Stress Fiber Remodeling.  67-68. 2008
• Analysis of Clustering and Interphase Region Effects on the Electrical Conductivity of Carbon Nanotube-Polymer Nanocomposites via Computational Micromechanics.  159-165. 2008
• Analytical Prediction of Periodic Motions in a Machine Tool With Loss of Effective Chip Contact.  673-682. 2008
• CHARACTERIZATION OF FOIL BEARING STRUCTURE FOR INCREASING SHAFT TEMPERATURES: PART I - STATIC LOAD PERFORMANCE.  671-678. 2008
• CHARACTERIZATION OF FOIL BEARING STRUCTURE FOR INCREASING SHAFT TEMPERATURES: PART II - DYNAMIC FORCE PERFORMANCE.  689-695. 2008
• Characterization of thermal properties and heat transfer behavior of microencapsulated phase change material slurry and multiwall carbon nanotubes in aqueous suspension.  1771-1777. 2008
• Chip Stick and Slip Motions of a Machine Tool in the Cutting Process.  119-127. 2008
• EFFECT OF RIB SPACING ON HEAT TRANSFER IN A TWO-PASS RECTANGULAR CHANNEL (AR=1:4) WITH A SHARP ENTRANCE AT HIGH ROTATION NUMBERS.  287-300. 2008
• EFFECT OF SIDE FEED PRESSURIZATION ON THE DYNAMIC PERFORMANCE OF GAS FOIL BEARINGS - A MODEL ANCHORED TO TEST DATA.  1079-1087. 2008
• Effect of Icing on Ship Maneuvering Characteristics.  997-1001. 2008
• Effect of side feed pressurization on the dynamic performance of gas foil bearings.  981-983. 2008
• Elastic contact model accounting for both asperity and substrate compliance with application to patterned media.  1121-1122. 2008
• Elastic/plastic contact mechanics-based analysis of hard disk drive media damage from slider corner impacts.  593-595. 2008
• Film-Cooling Effectiveness From Shaped Film Cooling Holes for a Gas Turbine Blade.  837-848. 2008
• Fischer-Tropsch Fuel Characterization via Microturbine Testing and Fundamental Combustion Measurements.  867-876. 2008
• Function Design Framework (FDF): Integrated Process and Function Modeling for Complex Systems.  273-286. 2008
• HIGH TEMPERATURE, PERMANENT MAGNET BIASED, FAULT TOLERANT, HOMOPOLAR MAGNETIC BEARING DEVELOPMENT.  1203-1214. 2008
• Heat Transfer in Leading Edge, Triangular Shaped Cooling Channels with Angled Ribs under High Rotation Numbers.  321-329. 2008
• Ignition and Flame Speed Kinetics of Two Natural Gas Blends With High Levels of Heavier Hydrocarbons.  1051-1066. 2008
• Implementation of magnetic suspension control with FPGA.  2035-2040. 2008
• Influence of Cooling Flow Rate Variation on Gas Turbine Blade Temperature Distributions.  45-53. 2008
• MEASUREMENTS OF LEAKAGE AND POWER LOSS IN A HYBRID BRUSH SEAL.  1453-1460. 2008
• MEASUREMENTS VERSUS PREDICTIONS FOR ROTORDYNAMIC AND LEAKAGE CHARACTERISTICS OF A CONVERGENT-TAPERED, HONEYCOMB-STATOR/SMOOTH-ROTOR ANNULAR GAS SEAL.  883-889. 2008
• MEASUREMENTS VERSUS PREDICTIONS FOR THE ROTORDYNAMIC CHARACTERISTICS OF A 5-PAD, ROCKER-PIVOT, TILTING-PAD BEARING IN LOAD BETWEEN PAD CONFIGURATION.  891-901. 2008
• Measurements Versus Predictions for Rotordynamic Characteristics of a Flexure Pivot-Pad Tilting Pad Bearing in an LBP Condition at Higher Unit Loads.  873-881. 2008
• Micro and nanoscale experiments and finite element studies of rail steels.  1061-1063. 2008
• Microstructure, mechanical and tribological properties of reactive magnetron sputtered titanium carbide coatings.  933-935. 2008
• NONLINEAR IDENTIFICATION OF MECHANICAL PARAMETERS IN A SQUEEZE FILM DAMPER WITH INTEGRAL MECHANICAL SEAL.  1059-1066. 2008
• Nanoscale joule heating along silicon nanowire and its nanoscale heater application.  1101-1107. 2008
• Nonlinear dynamic behavior of turbocharger rotor-bearing systems with hydrodynamic oil film and squeeze film damper in series: Prediction and experiment.  1083-1092. 2008
• Re-shaping semi-active structural response via simple applications of embedded computation, sensors and valves.  245-254. 2008
• Relative motion emulating robotic system as a test bed for aerial refueling using VISNAV and mobile stewart platforms.  41-47. 2008
• Second-Order Low-Frequency Wave Forces on a SPM Offloading Tanker in Shallow Water.  901-908. 2008
• Static Performance Characteristics and Rotordynamic Coefficients for a Four-Pad Ball-in-Socket Tilting Pad Journal Bearing.  861-871. 2008
• Static and Dynamic Performance of Pressure Dam Bearings With Dam Steps That Are (I) Square and (II) Filleted.  931-939. 2008
• The Transient Effect of Tendon Disconnection on the Global Motion of ETLP.  497-507. 2008
• Thermomechanical finite element analysis of impact-induced magnetic erasures in magnetic storage thin film media.  691-693. 2008
• Translating Terms of the Functional Basis Into Biologically Meaningful Keywords.  137-148. 2008
• Turbine Blade Platform Film Cooling with Typical Stator-Rotor Purge Flow and Discrete-Hole Film Cooling.  263-274. 2008
• Upstream vortex effects on turbine blade platform film cooling with typical stator-rotor purge flow.  707-718. 2008
• A micromechanical approach for analyzing thermo-mechanical responses of functionally graded materials.  87-89. 2008
• A nonlinear viscoelastic modeling of fiber metal laminates.  91-93. 2008
• Adaptive Key Component Control for Nonlinear Evolving Systems.  343-350. 2008
• Analyses of Deformation in Viscoelastic Sandwich Composites Subject to Moisture Diffusion.  299-301. 2008
• Characteristic response of a production diesel oxidation catalyst exposed to lean and rich PCI exhaust.  301-310. 2008
• Conjugate Heat Transfer and Film Cooling of a Multi-Stage Cooling Scheme.  1249-1257. 2008
• Effect of Coolant Ejection in Rectangular and Trapezoidal Trailing Edge Cooling Passages.  399-408. 2008
• Effect of tribochemical interactions on friction and wear of highly hydrogenated DLC films.  929-931. 2008
• Elasto-viscoplastic dispersive waves in silicon wafers.  1585-1589. 2008
• Evaluation of DLC coatings for foil bearing applications.  5-7. 2008
• Fabrication of Phase Reflection Sawtooth Gratings Optimized by Scalar and Vector Way by Using Diamond Cutting.  703-704. 2008
• Flow Boiling Heat Transfer in a Silicon Microchannel Heat Sink Using Liquid Crystal Thermography.  551-560. 2008
• HYBRID GAS BEARINGS WITH CONTROLLED SUPPLY PRESSURE TO ELIMINATE ROTOR VIBRATIONS WHILE CROSSING SYSTEM CRITICAL SPEEDS.  641-649. 2008
• Heat Transfer in Trailing Edge, Wedge Shaped Cooling Channels With Slot Ejection Under High Rotation Numbers.  311-320. 2008
• Mobility and Geometrical Analysis of a Two Actuated Spoke Wheel Robot Modeled as a Mechanism With Variable Topology.  1177-1186. 2008
• Modeling and Vibration Suppression of Pressurized Optical Membrane.  501-507. 2008
• Molecular Dynamics Simulations of Thermal Interactions in Nanoscale Liquid Channels.  897-905. 2008
• NUMERICAL SIMULATION USING REALIZABLE k-epsilon TURBULENCE MODEL OF JET FLOW MIXING WITHIN ROD BUNDLES.  993-998. 2008
• New materials and coatings for superlubricity and near-wearless sliding.  1069-1071. 2008
• Numerically Implemented Constitutive Model for SMA Applications Experiencing General Loads Resulting in Plastic Deformation and Large Rotations.  421-429. 2008
• Optimal Control of Web Guides Using a New Fiber Optic Edge Sensor.  1027-1034. 2008
• PIV Measurements of Jet Flow Mixing in the Vicinity of Rod Bundles using Matched-Index of Refraction.  987-991. 2008
• PTV EXPERIMENTS OF SUBCOOLED BOILING FLOW THROUGH A RECTANGULAR CHANNEL.  929-939. 2008
• Parametrization of All Stabilizing LTI Controllers for Multirate SISO Systems.  1125-1130. 2008
• Performance evaluation of half-wetted hydrodynamic bearings with DLC coated surfaces.  241-243. 2008
• TRU-FUELED VHTRS FOR APPLICATIONS REQUIRING AN EXTENDED OPERATION WITH MINIMIZED CONTROL AND NO REFUELING.  331-338. 2008
• The effects of compression ratio and expansion ratio on engine performance including the second law of thermodynamics: Results from a cycle simulation.  139-154. 2008
• Three-Dimensional Kinematic Analysis of a Two Actuated Spoke Wheel Robot Based on Its Equivalency to a Serial Manipulator.  1187-1194. 2008
• Tip Leakage Flow and Heat Transfer Characteristics on Rotor Casing and Blade Tip in an Axial Gas Turbine Engine: Steady Analysis.  635-644. 2008
• Total Internal Reflection (TIR) Lens Design for Surface Mount Techonology (SMT) LED Application.  105-106. 2008
• Transmission Clutch Fill Control Using a Customized Dynamic Programming Method.  463-470. 2008
• Unsteady Simulations for an Advanced-Louver Cooling Scheme.  2057-2066. 2008
• Flow Field Characterization at the Onset of Gas Entrainment in a Single Downward Discharge Using Particle Image Velocimetry.  Journal of Fluids Engineering. 1565-1576. 2007
• Identification of structural stiffness and damping coefficients of a shoed-brush seal.  Journal of Vibration and Acoustics: Transactions of the ASME. 648-655. 2007
• Identification of force coefficients in a squeeze film damper with a mechanical end seal - Centered circular orbit tests.  Journal of Tribology. 660-668. 2007
• Investigation of drug release from biodegradable PLG microspheres: Experiment and theory.  103-104. 2007
• Prediction of dry-friction whirl and whip between a rotor and a stator.  Journal of Vibration and Acoustics: Transactions of the ASME. 355-362. 2007
• A Theory for the Development of Conceptual Functional Models for Automation of Manual Processes.  263-275. 2007
• A comparison of two methods for predicting emissions from aircraft gas turbine combustors.  899-908. 2007
• An Interactive Morphological Matrix Computational Design Tool: A Hybrid of Two Methods.  249-261. 2007
• Cognitive Models of Design Ideation.  135-144. 2007
• Controlling Backfire Using Changes of the Valve Overlap Period for a Hydrogen-Fueled Engine Using an External Mixture.  243-251. 2007
• Decorin Deficient Cells Demonstrate Increased Proliferation and Altered Phenotypic Properties.  985-986. 2007
• Effect of Flow Parameter Variations on Full Coverage Film-Cooling Effectiveness for a Gas Turbine Blade.  93-103. 2007
• Effect of Higher-Order Hydrocarbons on Methane-Based Fuel Chemistry at Gas Turbine Pressures.  781-788. 2007
• Effect of inlet flow angle on gas turbine blade tip film cooling.  43-53. 2007
• Effect of unsteady wake on film-cooling effectiveness distribution on a gas turbine blade with compound shaped holes.  79-91. 2007
• Effects of Fluid Shear Stress on Endothelial Cell Invasion Into Three-Dimensional Matrices.  287-288. 2007
• Electrical and Thermal Conductivities of Carbon Nanotube-Epoxy Composites: Modeling and Characterization.  245-253. 2007
• Evaluation of real-time torque-turn charts with application to intelligent make-up.  803-811. 2007
• Exploring the Use of Functional Models as a Foundation for Biomimetic Conceptual Design.  79-92. 2007
• Film-cooling effectiveness on a rotating turbine platform using pressure sensitive paint technique.  169-183. 2007
• Film-cooling on a gas turbine blade pressure side or suction side with compound angle shaped holes.  569-579. 2007
• Flexure pivot tilting pad hybrid gas bearings: Operation with worn clearances and two load-pad configurations.  759-769. 2007
• Fluid-structure interaction in bi-leaflet mechanical heart valves.  17-18. 2007
• Function-Based Behavioral Modeling.  547-558. 2007
• Functional Decomposition in Engineering: A Survey.  227-236. 2007
• Heat transfer in a two-pass rectangular channel (AR=1 : 4) under high rotation numbers.  55-65. 2007
• Identification of force coefficients in a squeeze film damper with a mechanical end seal-centered circular orbit tests.  833-841. 2007
• Improvements to the analysis of gas foil bearings: Integration of top foil 1D and 2d structural models.  779-789. 2007
• Including Functional Models of Biological Phenomena as Design Stimuli.  103-113. 2007
• Investigation Into a Steam Whirl Which Affected HP Rotors of 300 MW Steam Turbines.  291-298. 2007
• Linear and Nonlinear Approach of Hydro-Pneumatic Tensioner Modeling for Spar Global Performance.  229-238. 2007
• Method and Detailed Analysis of Individual Hydrocarbon Species From Diesel Combustion Modes and Diesel Oxidation Catalyst.  71-83. 2007
• New Steps to Improve Rotordynamic Stability Predictions of Centrifugal Compressors.  843-848. 2007
• Numerical simulation of two-phase sloshing flow in LNG tank using finite-analytic level-set method.  851-860. 2007
• Optimal Bandwidth Allocation and QoS-Adaptive Control Co-Design for Networked Control Systems.  831-839. 2007
• Periodic Motions of the Machine Tools in Cutting Process.  2257-2266. 2007
• Prediction of film cooling and heat transfer on a rotating blade platform with stator-rotor purge and discrete film-hole flows in a 1-1/2 turbine stage.  67-77. 2007
• Preliminary Evaluation of the Bump at the End of the Railway Bridge.  227-240. 2007
• Quantification of uncertainty in reserves estimation from decline curve analysis of production data for unconventional reservoirs.  885-893. 2007
• Simulation of unsteady incompressible viscous flow using higher order implicit Runge-Kutta methods - Staggered grid.  403-416. 2007
• Static and Dynamic Characteristics for a Pressure-Dam Bearing.  859-867. 2007
• Stented artery biomechanics in the presence of stenoses and tapering.  701-702. 2007
• The Influence of Real Gas Properties on Predictions of Static and Rotordynamic Properties of Annular Seals for Injection Compressors.  791-798. 2007
• The effects of tank sloshing on LNG vessel responses.  789-795. 2007
• Three-Dimensional Numerical Simulations of Flows Past Smooth and Rough/Bare and Helically Straked Circular Cylinders Allowed to Undergo Two Degree-of-Freedom Motions.  921-930. 2007
• Time-domain simulation of riser VIV in sheared current.  911-920. 2007
• Using Parameterized Pareto Sets to Model Design Concepts.  215-228. 2007
• A New Approach for Changing Structural Properties of a Membrane Mirror Strip for Adaptive Optics Applications.  1809-1816. 2007
• Different Modes of Gas Entrainment Through Bottom Discharge Branch by Using Three Dimensional Particle Image Velocimetry System.  1969-1977. 2007
• Discrete-Time Closed-Loop Model Identification of Fixed-Structure Unstable Multivariable Systems.  1119-1127. 2007
• Effect of upstream wake with vortex on turbine blade platform film cooling with simulated stator-rotor purge flow.  125-134. 2007
• Entrance Length Characteristics in Microchannels Using Micro-Particle Image Velocimetry.  853-861. 2007
• Heat transfer in trailing edge, wedge-shaped cooling channels under high rotation numbers.  135-145. 2007
• Identification of Rotordynamic Forces in a Flexible Rotor System Using Magnetic Bearings.  895-902. 2007
• Imbalance Detection and Health Monitoring From Gain Variations in an Adaptive Disturbance Rejection Controller.  1167-1177. 2007
• Impact of Tool Geometry on Cutting Dynamics.  2275-2280. 2007
• Local Heat Transfer Characteristics of Flows Induced by Multiple Piezoelectrically Actuated Vibrating Cantilevers.  149-158. 2007
• Outcome Based Assessment and Continuous Improvement Model for Engineering Technology Programs.  1-8. 2007
• Simulation of a Multi-Stage Cooling Scheme for Gas Turbine Engines: Part I.  821-832. 2007
• Spray and cooling dynamics of cryogen sprays impinging on a human skin model.  815-821. 2007
• Subcooled pool boiling studies on nano-textured surfaces.  985-991. 2007
• The Effects of Cross Links on Adiabatic Two-Phase Flow Characteristics in Scaled Microchannel Heat Sinks.  915-922. 2007
• Thermo-Fluidic Characteristics in a Cross-Linked Silicon Microchannel Heat Sink.  969-978. 2007
• Time and spatial pressure and velocity correlation in a microbubble laden boundary layer.  307-312. 2007
• Unsteady Simulation of Film Cooling Flow From an Inclined Cylindrical Jet.  581-589. 2007
• Hybrid flexure pivot-tilting pad gas bearings: Analysis and experimental validation.  Journal of Tribology. 551-558. 2006
• Partially averaged Navier-Stokes method for turbulence: Fixed point analysis and comparison with unsteady partially averaged Navier-Stokes.  Journal of Applied Mechanics. 422-429. 2006
• Partially-averaged Navier-Stokes model for turbulence: A Reynolds-averaged Navier-Stokes to direct numerical simulation bridging method.  Journal of Applied Mechanics. 413-421. 2006
• Rotational buoyancy effects on heat transfer in five different aspect-ratio rectangular channels with smooth walls and 45 degree ribbed walls.  Journal of Heat Transfer: Transactions of the ASME. 1130-1141. 2006
• A Function-Based Methodology for Analyzing Critical Events.  1193-1204. 2006
• A Process Modeling Methodology for Automation of Manual and Time Dependent Processes.  771-779. 2006
• A Time Integration Algorithm for Nonlinear Viscoelastic Behaviors of Orthotropic Media.  ASME Applied Mechanics Division -Publications- Amd. 69-75. 2006
• A design to improve the effective damping characteristics of hole-pattern-stator annular gas seals.  1271-1277. 2006
• A design to increase the static stiffness of hole pattern stator gas seals.  1279-1284. 2006
• A virtual tool for prediction of turbocharger nonlinear dynamic response: Validation against test data.  1313-1321. 2006
• Accurate Interpretation of Magnetic Shape Memory Alloy Experiments Utilizing Coupled Magnetostatic Analysis.  ASME -Publications- Ad. 311-321. 2006
• Active Nanocomposite Polymers: Enhancing Sensing and Actuation Performance.  267-271. 2006
• Aircraft Flight Control Using Nonlinear Adaptive Backstepping.  American Society of Mechanical Engineerings, Bioengineering Division (Publication) BED. 145-153. 2006
• Characteristics of vortex shedding process induced by a solitary wave propagating over a submerged obstacle.  479-486. 2006
• Characterization of Polyvinylidene Fluoride (PVDF)-Double-Walled Carbon Nanotubes (DWNT).  American Society of Mechanical Engineers, Materials Division (Publication) MD. 369-373. 2006
• Development of an automated control system verification platform for a solid oxide fuel cell.  777-785. 2006
• Dynamic Analysis of a Digital Micromirror Device.  ASME Applied Mechanics Division -Publications- Amd. 263-271. 2006
• Dynamics of Variable-Geometry Electrostatic Microactuators.  ASME Applied Mechanics Division -Publications- Amd. 273-281. 2006
• Effect of Superposition on Spanwise Film-Cooling Effectiveness Distribution on a Gas Turbine Blade.  ASME -Publications- Htd. 477-487. 2006
• Effect of turbulence intensity and periodic unsteady wake flow condition on boundary layer development, separation, and re-attachment over the separation bubble along the suction surface of a low pressure turbine blade.  1911-1930. 2006
• Experimental Study of the Vascular Dynamics of a Saccular Basilar Aneurysm.  ASME -Publications- Fed. 317-326. 2006
• Fabrication of Bi Nanowires Using a Vacuum Melting and Mechanical Injection Technique.  American Society of Mechanical Engineers, Materials Division (Publication) MD. 21-24. 2006
• Film-cooling effectiveness on a rotating blade platform.  37-47. 2006
• First and Second Law Analyses of a Spark-Ignition Engine Using Either Isooctane or Hydrogen: An Initial Assessment.  American Society of Mechanical Engineers, Internal Combustion Engine Division (Publication) ICE. 47-66. 2006
• Flywheel energy storage system for naval applications.  25-33. 2006
• Fracture Toughness of Space Shuttle Foam.  American Society of Mechanical Engineers, Materials Division (Publication) MD. 155-157. 2006
• Fuel flexibility influences on premixed combustor blowout, flashback, autoignition, and stability.  601-615. 2006
• Identification of force coefficients in a squeeze film damper with a mechanical seal. Part I - Unidirectional load tests.  1285-1293. 2006
• Ignition of lean CO/H-2/air mixtures at elevated pressures.  389-396. 2006
• Internal cooling near trailing edge of a gas turbine airfoil with cooling airflow through blockages with holes.  1005-1014. 2006
• Numerical study of a rotating blade platform with film cooling from cavity purge flow in a 1-% turbine stage.  315-324. 2006
• Rigid Formation of a Group of Vehicles Using Constraint Forces.  American Society of Mechanical Engineerings, Bioengineering Division (Publication) BED. 397-404. 2006
• Rotordynamic Stability Predictions for Centrifugal Compressors Using a Bulk-Flow Model to Predict Impeller Shroud Force and Moment Coefficients.  1211-1223. 2006
• Steady-State and Transient Dynamical Systems Analysis of Uncoupled and Coupled Very Large Amplitude Roll Response of a Vessel in Regular and Random Waves.  369-374. 2006
• Strength and Fracture of a Multifunctional Polystyrene Nanocomposite.  American Society of Mechanical Engineers, Materials Division (Publication) MD. 427-431. 2006
• The Stick Motion of a Harmonically Excited, Friction-Induced Oscillator on a Sinusoidally Traveling Surface.  American Society of Mechanical Engineerings, Bioengineering Division (Publication) BED. 491-501. 2006
• Thermomechanical Characterization and Modeling of Ni60Ti40 SMA for Actuated Chevrons.  ASME -Publications- Ad. 281-290. 2006
• Three-dimensional numerical simulations of circular cylinders undergoing two degree-of-freedom vortex-induced vibrations.  497-504. 2006
• Understanding friction factor behavior in liquid annular seals with deliberately roughened surfaces, roughness geometric characteristics defining flow resistance.  1571-1579. 2006
• Utilizing a Cycle Simulation to Examine the Use of EGR for a Spark-Ignition Engine Including the Second Law of Thermodynamics.  American Society of Mechanical Engineers, Internal Combustion Engine Division (Publication) ICE. 31-46. 2006
• Visual Representations as an Aid to Concept Generation.  1277-1288. 2006
• A Validation Study of an Automated Concept Generator Design Tool.  283-294. 2006
• A thermodynamic framework for describing solidification of polymer melts.  Journal of Engineering Materials and Technology. 55-63. 2006
• An Undergraduate Laboratory: The Effect of Nanoparticle Self Assembly on the Electrical and Mechanical Properties of Nanocomposites.  61-65. 2006
• Characterizing the Onset of Gas Entrainment in a Single Discharging Bottom Branch Through Flow Visualization.  1155-1163. 2006
• Damage-induced modeling of elastic-viscoelastic randomly oriented particulate composites.  Journal of Engineering Materials and Technology. 18-27. 2006
• Design of Simulation Tools for Trainig Programs in Lean Manufacturing.  413-418. 2006
• Effects of Applied Potential on Friction of a PVDF Micro Gripper.  1145-1152. 2006
• Experimental Mapping of Local Heat Transfer Coefficients Under Multiple Piezoelectric Fans.  ASME -Publications- Htd. 635-645. 2006
• Film Cooling Effectiveness Distributions on a Turbine Blade Cascade Platform With Stator-Rotor Purge and Discrete Film Hole Flows.  ASME -Publications- Htd. 489-498. 2006
• Film cooling effectiveness distribution on a gas turbine blade platform with inclined slot leakage and discrete film hole flows.  383-394. 2006
• Hybrid Flexure Pivot-Tilting Pad Gas Bearings: Analysis and Experimental Validation.  1221-1230. 2006
• Identification of Force Coefficients in a Squeeze Film Damper With a Mechanical End Seal: Centered Circular Orbit Tests.  309-318. 2006
• Investigation of Contact Stiffness and Contact Damping for Magnetic Storage Head-Disk Interfaces.  843-854. 2006
• Modal Wavelets Analysis to Gas-Liquid Two Phase Flow PIV Images.  677-683. 2006
• Modeling of a Membrane Mirror Strip Actuated Using a Piezoelectric Bimorph.  29-35. 2006
• Modeling of the Effect of Preferential Texturing on the Interfacial Forces in Sub-5 nm Ultra-Low Flying Head-Disk Interfaces.  899-908. 2006
• Optimum Channel Inclination for Gas Venting Under Countercurrent Flow Limitations.  733-739. 2006
• Rib spacing effect on heat transfer and pressure loss in a rotating two-pass rectangular channel (AR=1 : 2) with 45-degree angled ribs.  363-373. 2006
• Rotordynamic performance of a rotor supported on bump type foil gas bearings: Experiments and predictions.  1407-1415. 2006
• Rotordynamics of Small Turbochargers Supported on Floating Ring Bearings: Highlights in Bearing Analysis and Experimental Validation.  1213-1220. 2006
• Spectrum Shifting as a Mechanism to Improve Performance of VHTRs with Advanced Actinide Fuels.  929-934. 2006
• The Effect of Honeycomb Relative Density on Its Effective Elastic Properties: A Theoretical and Experimental Study.  ASME Applied Mechanics Division -Publications- Amd. 93-104. 2006
• Thermal Analysis for Cryosurgery of Nodular Basal Cell Carcinoma.  125-131. 2006
• Tribological Investigation of Cast Iron Air-Conditioning Compressor Surfaces in CO2 Refrigerant.  17-23. 2006
• Wavelet Spatial Energy Spectrums Studies on Drag Reduction by Microbubble Injection.  493-497. 2006
• Youngs Modulus Measurement of Electroplated Nickel Using AFM.  American Society of Mechanical Engineers, Micro-Electro Mechanical Systems Division, (Publications) MEMS. 243-247. 2006
• Numerical Investigation of Multistage Viscous Micropump Configurations.  Journal of Fluids Engineering. 734-742. 2005
• High temperature characterization of a radial magnetic bearing for turbomachinery.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 437-444. 2005
• A Computational Technique for Concept Generation.  267-276. 2005
• A network approach to define modularity of product components.  435-446. 2005
• Adhesive Contact Modeling of Ultra-Low Flying Head-Disk Interfaces With and Without Roughness Effects.  739-740. 2005
• Advances in Nonlinear Rotordynamics of Passenger Vehicle Turbochargers: A Virtual Laboratory Anchored to Test Data.  891-892. 2005
• Analysis of Gas Foil Bearings With Piecewise Linear Elastic Supports.  69-70. 2005
• Analysis of Impact-Induced Head Disk Interface Damage During Op-Shock.  741-742. 2005
• Analysis of wave run-up measurements on a mini-TLP.  881-890. 2005
• Capturing Empirically Derived Design Knowledge for Creating Conceptual Design Configurations.  249-257. 2005
• Combined steady state and transient analysis of a patrol vessel as affected by varying amounts of damping and periodic and random wave excitation.  1081-1085. 2005
• Computation of flow and heat transfer in rotating rectangular channels (AR=4 : 1) with pin-fins by a Reynolds stress turbulence model.  409-418. 2005
• Computational Methods to Predict and Avoid Design Failure.  721-732. 2005
• Creation of Assembly Models to Support Automated Concept Generation.  259-266. 2005
• Design and validation of a reduced test matrix for the autoignition of gas turbine fuel blends.  209-219. 2005
• Experimental Verification of an Improved Elastic-Plastic Static Friction Model Including Roughness Effects.  347-348. 2005
• FUNdesign: A Function-Based Method for Addressing Uncertainty During the Design of Engineering Systems Representations and Knowledge Storage.  161-170. 2005
• Film cooling effectiveness on the leading edge of a rotating film-cooled blade using pressure sensitive paint.  375-384. 2005
• Film-cooling effectiveness on squealer rim walls and squealer cavity floor of a gas turbine blade tip using pressure sensitive paint.  397-408. 2005
• Float-off operation of a land-built cot on dual transportation barges: Time-vs. frequency-domain analysis.  1065-1071. 2005
• Gas Foil Bearings: Limits for High-Speed Operation.  71-72. 2005
• Heavily loaded gas foil bearings: A model anchored to test data.  763-771. 2005
• Identification of Bearing Force Coefficients in Flexible Rotors: Extensions to a Field Method.  47-48. 2005
• Identification of structural stiffness and damping coefficients of a shoed brush seal.  959-966. 2005
• Ignition of lean methane-based fuel blends at gas turbine pressures.  367-379. 2005
• Intermittency based unsteady boundary layer transition modeling, implementation into Navier-Stokes equations.  973-989. 2005
• Intermittent behavior of the separated boundary layer along the suction surface of a low pressure turbine blade under periodic unsteady flow conditions.  1011-1027. 2005
• Micro-machined temperature sensor arrays for studying micro-scale features in film boiling.  ASME -Publications- Htd. 317-324. 2005
• Micro/Nano Scale Wear Behavior of Pearlitic and Bainitic Rail Steels.  795-796. 2005
• Modeling of web slip on a roller and its effect on web tension dynamics.  1187-1194. 2005
• Multiscale Control to Meet the Conflicting Nanoscale Performance Requirements.  1287-1293. 2005
• Nonlinear rotordynamics of automotive turbochargers - Predictions and comparisons to test data.  671-678. 2005
• Numerical prediction of film cooling and heat transfer on the leading edge of a rotating blade with two rows holes in a 1-(1)/(2) turbine stage at design and off design conditions.  335-344. 2005
• Parametric sensitivity analysis and model tuning applied to vapor compression systems.  1203-1212. 2005
• Reduction of vortex-driven oscillations in a choked duct through active control.  805-813. 2005
• Robust Control for Networked Control Systems With Admissible Parameter Uncertainties.  59-66. 2005
• Rotordynamic Coefficients Measurements Versus Predictions for a High Speed Flexure-Pivot Tilting-Pad Bearing (Load-Between-Pad Configuration).  725-736. 2005
• Some applications of automatic differentiation to rigid, flexible, and constrained multibody dynamics.  271-281. 2005
• Structural stiffness, dry-friction coefficient and equivalent viscous damping in a bump-type foil gas bearing.  737-746. 2005
• Studying Shear Behavior of Ductile Metals Using an Atomic Force Microscope.  925-926. 2005
• The Narrow Groove Analysis Revisited.  121-122. 2005
• The effects of oxygen enrichment of combustion air for spark-ignition engines using a thermodynamic cycle simulation.  Proceedings of the Spring Technical Conference of the ASME Internal Combustion Engine Division. 135-147. 2005
• Thermal Contact Resistance and Thermal Conductivity of a Carbon Nanofiber.  197-203. 2005
• Thermo-mechanical analysis of composites under combined conduction heating and large deflection bending.  243-253. 2005
• Triboelectrification Between Dissimilar Smooth Metal Surfaces With Self-Assembled Monolayers.  943-944. 2005
• Tribological Studies of Compressor Surfaces in the Presence of Carbon Dioxide Under Extreme Environmental Pressure Conditions.  121-122. 2005
• Use of differential scanning calorimetry and X-ray diffraction as experimental tools to understand how nucleating agent concentration affects supercooling in microencapsulated phase change materials.  ASME -Publications- Htd. 385-390. 2005
• Vapor compression cycles: Control-oriented modeling and validation.  1213-1222. 2005
• A Surface Analytical Study of the Effects of Water and Oxygen on Tribological Behavior of DLC Films.  485-486. 2005
• Amorphous Carbon Thin Films for Interfaces in MEMS.  723-724. 2005
• An experimental investigation of the effect of walls on gas-liquid flows through fixed particle beds.  815-823. 2005
• Assessment of steady state PSP and transient IR measurement techniques for leading edge film cooling.  ASME -Publications- Htd. 467-475. 2005
• Assessment of steady state PSP, TSP, and IR measurement techniques for flat plate film cooling.  37-46. 2005
• Buoyancy effects on heat transfer in five different aspect-ratio rectangular channels with smooth walls and 45-degree ribbed walls.  453-463. 2005
• Comparative Tribological Behavior of TiN-, CrN-, ZrN-, and MoN -Cu Based Nanocomposite Coatings.  479-480. 2005
• Confinement of Freezing Front by Laser Irradiation During Cryosurgery.  831-837. 2005
• Design of simulation tools for training programs in Lean Manufacturing.  457-462. 2005
• Development of a unique, passive, microgravity vortex separator.  Proceedings of the ASME Fluids Engineering Division Summer Meeting. 763-770. 2005
• Diameter and size distributions of Poly (lactide-co-glycolide) [PLG] based microspheres.  1041-1048. 2005
• Effect of Reynolds number and periodic unsteady wake flow condition on boundary layer development, separation, and re-attachment along the suction surface of a low pressure turbine blade.  991-1010. 2005
• Effects of a Wire Mesh on Droplet Size and Velocity Distributions of Cryogenic Sprays.  825-829. 2005
• Evaluation of Near Frictionless Carbon Coatings Using Four-Ball Wear Tester.  433-434. 2005
• Experimental response of a rotor supported on Rayleigh step gas bearings.  715-724. 2005
• Fiber-optic strain gauge calibration and dynamic flexibility transfer function identification in magnetic bearings.  757-762. 2005
• Heat transfer dynamics during treatment of port wine stain birthmarks with multiple-intermittent cryogen spurts and laser pulses.  855-859. 2005
• Heat transfer in two-pass rotating rectangular channels (AR=1 : 2 and AR=1 : 4) with 45 deg angled rib turbulators.  Journal of Turbomachinery. 164-174. 2005
• Local Heat Transfer Measurements in Micro Geometries Using Liquid Crystal Thermography.  217-224. 2005
• Model Updating Using a Quadratic Form.  2141-2149. 2005
• Multi-Axis Maglev Positioner With High Resolution Over Large Travel Range.  1295-1305. 2005
• Numerical Simulation of Piston Effect in Supercritical Carbon Dioxide.  805-810. 2005
• Numerical modeling of the tissue freeze-thaw cycle during cutaneous cryosurgery using liquid nitrogen spray.  275-282. 2005
• Scuffing Resistance of Laser Textured Surfaces.  467-469. 2005
• Simulation of the Onset of Gas Entrainment From a CANDU Reactor Channel Under LOCA Conditions: II.  871-880. 2005
• Superlubricity and Near-Wearless Sliding in Carbon Films.  461-462. 2005
• The Influence of Internal Damping on the Rotordynamic Stability of a Flywheel Rotor With Flexible Hub.  979-984. 2005
• The effect of roughness on the impact dynamics and heat transfer of cryogen droplets impinging onto indented skin phantoms.  861-866. 2005
• Transient Behavior of Near Frictionless Carbon Films in Reciprocating Microtribometery in Low Humidity Inert Environments.  423-424. 2005
• Tribological Behavior of Oil-Lubricated Laser Textured Surfaces in Conformal Flat and Point Contacts.  525-526. 2005
• Understanding friction factor behavior in liquid annular seals with deliberately roughened surfaces.  Journal of Tribology. 213-222. 2005
• Water Lubricated Sliding Wear of Si3N4/BN Fibrous Monoliths.  141-142. 2005
• A Comparative Aerodynamic and Performance Study of a Three-Stage High Pressure Turbine With 3-D Bowed Blades and Cylindrical Blades.  1237-1246. 2004
• A Knowledge Repository for Behavioral Models in Engineering Design.  943-952. 2004
• A Modular Design Approach to Support Sustainable Design.  909-918. 2004
• Analysis of Performance and Rotordynamic Force Coefficients of Brush Seals With Reverse Rotation Ability.  681-689. 2004
• Applying Functional Modeling as a Unifying Basis for Design for Six Sigma Execution.  979-990. 2004
• Balancing the Speed and Fidelity of Automotive Powertrain Models Through Surrogation.  249-258. 2004
• Bump-Type Foil Bearing Structural Stiffness: Experiments and Predictions.  671-679. 2004
• Computation of Flow and Heat Transfer in Two-Pass Rotating Rectangular Channels (AR=1:1, AR=1:2, AR=1:4) With 45-deg. Angled Ribs by Reynolds Stress Turbulence Model.  603-612. 2004
• Directed Assembly of Metal Oxide Nanobelts With Microsystems Into Integrated Nanosensors.  543-547. 2004
• Experimental Lift Off Characteristics and the Effect of a Low Friction Coating on the Startup Response of Simple Gas Hybrid Bearings for Oil-Free Turbomachinery.  769-778. 2004
• Experimental Study of the Effect of Periodic Unsteady Wake Flow on Boundary Layer Development, Separation, and Re-Attachment Along the Surface of a Low Pressure Turbine Blade.  247-265. 2004
• Feature Recognition for Injection-Molded and Die-Cast Parts.  693-702. 2004
• Film Cooling Effectiveness on the Leading Edge of a Rotating Turbine Blade.  ASME -Publications- Htd. 565-574. 2004
• Film-Cooling Effectiveness on a Gas Turbine Blade Tip Using Pressure Sensitive Paint.  241-250. 2004
• Identification of Bearing Force Coefficients From Measurements of Imbalance Response of a Flexible Rotor.  843-850. 2004
• Iterative Modeling and Identification of a CO2 Air Conditioning System.  813-820. 2004
• Numerical Prediction of Film Cooling and Heat Transfer With Different Film-Hole Arrangements on the Plane and Squealer Tip of a Gas Turbine Blade.  177-187. 2004
• Numerical Prediction of Film Cooling and Heat Transfer on the Leading Edge of a Rotating Blade in a 1-1/2 Turbine Stage.  ASME -Publications- Htd. 555-564. 2004
• Numerical Simulation for Mixed Convective Flow Over a Three-Dimensional Horizontal Backward Facing Step.  1031-1042. 2004
• On Characterizing and Assessing the Validity of Behavioral Models and Their Predictions.  325-336. 2004
• Rotordynamic Performance of Flexure Pivot Hydrostatic Gas Bearings for Oil-Free Turbomachinery.  691-699. 2004
• Simulation of Frictional Sliding Under Impact Shear Loading.  99-102. 2004
• Sustainable Design Through Flexible Product Evolution.  187-196. 2004
• System Identification and Optimal Control of a 6-DOF Magnetic Levitation Stage With Nanopositioning Capabilities.  957-964. 2004
• The Influence of In Situ Reheat on Turbine-Combustor Performance.  601-612. 2004
• Thermal Conductivities of Individual Tin Dioxide Nanobelts.  457-461. 2004
• Transmural LV Systolic Wall Thickening Gradients and Models of Heart Wall Mechanics.  Advances in Bioengineering, BED. 311-312. 2004
• Water Waves and Marine Structure Interaction.  1155-1165. 2004
• Wave Runup on Cylinders Subject to Deep Water Random Waves.  385-392. 2004
• A Customer Needs Motivated Conceptual Design Methodology for Product Portfolios.  153-166. 2004
• Adhesive Effects on Dynamic Friction for Unlubricated Rough Planar Surfaces.  1179-1208. 2004
• An Overview of the Direct Energy Conversion Proof of Principle Power Production Program.  551-555. 2004
• Control Strategies for Distributed Real-Time Control With Time Delays and Packets Losses.  547-553. 2004
• Cryogen Droplet Impingement Onto Indented Surfaces Relevant to Dermatologic Laser Surgery Therapies.  707-713. 2004
• Evaluation of Sub-Zero and Residence Times After Continuous Versus Multiple Intermittent Cryogen Spray Cooling Exposure on Human Skin Phantom.  683-686. 2004
• Extracting Summit Roughness Parameters From Random Gaussian Surfaces Accounting for Asymmetry of the Summit Heights.  1209-1215. 2004
• Generation and Propagation of Thermoacoustic Waves in Mildly Supercritical Carbon Dioxide.  129-135. 2004
• Heat Transfer in Two-Pass Rotating Rectangular Channels (AR=1:2 and AR=1:4) With 45 Angled Rib Turbulators.  305-315. 2004
• Heat Transfer in Two-Pass Rotating Rectangular Channels (AR=2:1) With Discrete V-Shaped and Discrete Angled Rib Turbulators.  ASME -Publications- Htd. 545-554. 2004
• Ignition Delay Time Measurements of C2HX Fuels and Comparison to Several Detailed Kinetics Mechanisms.  585-590. 2004
• Imaging of Port Wine Stain Lesions Using a Multi-Sensor Photoacoustic Probe.  719-723. 2004
• Modal Analysis of an Ultra-Flexible, Self-Rigidizing Toroidal Satellite Component.  671-677. 2004
• Modeling and Information in the Design Process.  21-30. 2004
• Modeling and Multivariable Control of a High Precision Multidimensional Positioner.  949-956. 2004
• Multistage Viscous Micropumps.  745-752. 2004
• Radial Heat Transfer Dynamics During Cryogen Spray Cooling.  677-682. 2004
• Shape Control of Tensegrity Plates: An Experimental Study.  ASME -Publications- Ad. 63-68. 2004
• Spectral Dynamics in a Channel Flow With Microbubbles.  847-850. 2004
• Theory and test correlation for laminate stacking factor effect on homopolar bearing stiffness.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 142-146. 2004
• Thermal Performance of Angled, V-Shaped, and W-Shaped Rib Turbulators in Rotating Rectangular Cooling Channels (AR = 4:1).  885-894. 2004
• Vorticity Modification in a Turbulent Channel Flow by Microbubble Injection.  851-854. 2004
• Heat transfer coefficients and film cooling effectiveness on the squealer tip of a gas turbine blade.  Journal of Turbomachinery. 648-657. 2003
• Heat transfer coefficients on the squealer tip and near-tip regions of a gas turbine blade with single or double squealer.  Journal of Turbomachinery. 778-787. 2003
• Heat transfer in rotating rectangular cooling channels (AR=4) with dimples.  Journal of Turbomachinery. 555-563. 2003
• A Micro-Flow Cytometer Based on Dielectrophoretic Particle Focusing.  545-549. 2003
• A Virtual Reality Based Decision Support Framework for Manufacturing Simulation.  1145-1151. 2003
• An Experimental and Modeling Study of Electroosmotic Bulk and Near-Wall Flows in Two-Dimensional Micro- and Nanochannels.  American Society of Mechanical Engineers, Materials Division (Publication) MD. 221-227. 2003
• Application of Multivariable Adaptive Control to Automotive Air Conditioning Systems.  185-193. 2003
• Automated Manufacturability Analysis for Injection-Molded and Die-Cast Parts.  205-226. 2003
• Comparison of Analytical and Centrifuge Model Tests for Suction Caissons Subjected to Combined Loads.  889-894. 2003
• Comparison of Rotordynamic Analysis Predictions With the Test Response of Simple Gas Hybrid Bearings for Oil Free Turbomachinery.  619-632. 2003
• Computation of Flow and Heat Transfer in Rotating Rectangular Channels (AR = 4) With V-Shaped Ribs by a Reynolds Stress Turbulence Model.  237-246. 2003
• Correlations Between Spray Properties and Heat Transfer Dynamics During Cryogen Spray Cooling.  451-457. 2003
• Design and Construction of a Novel Tubular Linear Motor With Controller for Robotics Applications.  475-484. 2003
• Design and Control of a 6-DOF Positioner With High Precision.  1387-1394. 2003
• Developing Variational Vibration Models of Damaged Beams: Toward Intelligent Failure Detection.  ASME -Publications- Bed. 521-534. 2003
• Exercise Can Reverse the Phenotype of Biglycan Deficient Mice.  American Society of Mechanical Engineerings, Bioengineering Division (Publication) BED. 37-38. 2003
• Experimental Response of Simple Gas Hybrid Bearings for Oil-Free Turbomachinery.  607-617. 2003
• Field Methods for Identification of Bearing Support Parameters: Part I Identification From Transient Rotor Dynamic Response Due to Impacts.  509-517. 2003
• Field Methods for Identification of Bearing Support Parameters: Part II Identification From Rotor Dynamic Response Due to Imbalances.  519-526. 2003
• Functional and Mathematical Equivalence of Mechanisms: A Novel Approach to Integrating Synthesis and Design Analysis.  675-685. 2003
• Heat Transfer Coefficients on the Squealer Tip and Near Tip Regions of a Gas Turbine Blade With Single or Double Squealer.  681-690. 2003
• Heat Transfer in Water-Cooled Silicon Carbide Milli-Channel Heat Sinks for High Power Electronic Applications.  ASME -Publications- Htd. 327-335. 2003
• Hierarchical divergence-free bases and their application to particulate flows.  Journal of Applied Mechanics. 44-49. 2003
• High Temperature Characterization of a Radial Magnetic Bearing for Turbomachinery.  633-642. 2003
• Investigation of Hybrid Fuel Cell (HFC) Technology Applications on the Future Passenger Railroad Transportation.  39-53. 2003
• Maglev 6-DOF Stage for Nanopositioning.  1363-1370. 2003
• Modeling the Effect of Surface Roughness on the Adhesion, Contact and Friction in Micro-Electro-Mechanical Systems (MEMS) Interfaces.  75-82. 2003
• Multi-Scale Analysis of Deformation and Failure of Superplastic Materials.  137-137. 2003
• On the Physics of the Flow Separation Along a Low Pressure Turbine Blade Under Unsteady Flow Conditions.  1063-1079. 2003
• Precision Control of Force Produced by Ionic Polymer Metal Composite.  ASME -Publications- Bed. 285-291. 2003
• Refined Model for Inclined Load Capacity of Suction Caissons.  883-887. 2003
• Rotation Effect on Jet Impingement Heat Transfer in Smooth Rectangular Channels With Four Heated Walls and Film Coolant Extraction.  671-680. 2003
• Simplified Building and Air Handling Unit Model Calibration and Applications.  15-25. 2003
• Singularity Issue in Dimensional Variation Diagnosis of Multi-Station Assembly Processes.  339-350. 2003
• System Identification of Nonlinear Coupled Ship/Offshore Platform Dynamics in Beam Seas.  531-540. 2003
• Test Response of a Turbocharger Supported on Floating Ring Bearings: Part I Assessment of Subsynchronous Motions.  969-974. 2003
• Test Response of a Turbocharger Supported on Floating Ring Bearings: Part II Comparisons to Nonlinear Rotordynamic Predictions.  975-980. 2003
• The Use of a Three-Zone Combustion Model to Determine Nitric Oxide Emissions From a Homogeneous-Charge, Spark-Ignited Engine.  Proceedings of the Spring Technical Conference of the ASME Internal Combustion Engine Division. 115-126. 2003
• Thermal and Thermoelectric Measurements of Low Dimensional Nanostructures.  77-82. 2003
• Thermomechanical Characterization of SMA Actuators Under Cyclic Loading.  ASME -Publications- Ad. 211-217. 2003
• Use of High Intensity Milling and Equal Channel Angular Extrusion to Produce and Consolidate Nanostructured Titanium Silicide.  871-877. 2003
• An Economic Analysis Method of Energy Saving Strategies in Newly Constructed Buildings.  65-71. 2003
• An LMI Optimization Approach to the Design of Structured Linear Controllers Using a Linearization Algorithm.  279-286. 2003
• Analysis of PIV Image Using Modal Wavelet Transform: Proposal of a Modal Wavelet Transform and Application to PIV Image Analysis.  255-260. 2003
• Design and analysis of micromachined thermosyphon for cooling of high-power InPHBT circuits.  285-293. 2003
• Design of Modern Controls for the Controlled Advanced Research Turbine (CART).  304-316. 2003
• Dynamic Behavior of Cryogen Spray Cooling: Effect of Spray Distance.  791-797. 2003
• Effect of Rotation on Heat Transfer in Narrow Rectangular Cooling Channels (AR = 8:1 and 4:1) With Pin-Fins.  213-223. 2003
• Heat Transfer in Rotating Rectangular Channels (AR = 4:1) With V-Shaped and Angled Rib Turbulators With and Without Gaps.  661-670. 2003
• Identification of Wind Turbine Response to Turbulent Inflow Structures.  2557-2566. 2003
• Influence of Entrance Geometry on Heat Transfer in Narrow Rectangular Cooling Channels (AR = 4:1) With Angled Ribs.  ASME -Publications- Htd. 119-129. 2003
• Investigation of Microbubble Boundary Layer Using Particle Image Velocimetry.  601-607. 2003
• Modeling of the Onset of Gas Entrainment From a Stratified Two-Phase Region Through Two Side Branches.  1425-1431. 2003
• Optimization of cryogen spray cooling for port wine stain laser therapy using photoacoustic measurement of epidermal melanin.  13-14. 2003
• Parametric study of surface finish in end milling using robust design techniques.  31-37. 2003
• Suppression of Persistent Rotor Vibrations Using Adaptive Techniques.  685-693. 2003
• The Role of CFD in Preliminary Aerospace Design (Keynote).  1947-1952. 2003
• Three-Dimensional Reconstruction of Bubble Distribution in Two-Phase Flows With Metaball Technique.  2345-2350. 2003
• Heat transfer in a two-pass rectangular rotating channel with 45-deg angled rib turbulators.  Journal of Turbomachinery. 251-259. 2002
• Prediction of flow and heat transfer in rotating two-pass rectangular channels with 45-deg rib turbulators.  Journal of Turbomachinery. 242-250. 2002
• A Bulk Flow Model for Off-Centered Honeycomb Gas Seals.  543-552. 2002
• A Bulk-Flow Model of Angled Injection Lomakin Bearings.  553-562. 2002
• A Computational Approach to Conceptual Design.  15-25. 2002
• A Numerical Study of Flow and Heat Transfer in Rotating Rectangular Channels (AR=4) With 45 Rib Turbulators by Reynolds Stress Turbulence Model.  533-542. 2002
• An Experimental Study of Local Heat Transfer Distribution Between Blockages With Holes in a Rectangular Channel.  ASME -Publications- Htd. 55-64. 2002
• Analysis of a CRDM Nozzle Break LOCA Without Scram Using the U.S. NRC Coupled Code TRAC-M/PARCS.  365-374. 2002
• Analysis of the Dynamical Behaviour of an Offshore Supply Vessel With Water on Deck.  383-390. 2002
• Characterization of Dynamical Instability Using Instantaneous Frequency.  793-800. 2002
• Cohesive Finite Element Based Modeling of Damage in Composite Materials.  11-19. 2002
• Computation of Flow and Heat Transfer in Turbine Blade Cooling Passages by Reynolds Stress Turbulence Model (Keynote Paper).  867-883. 2002
• Constitutive Modeling of Asphalt Bound Granular Materials: Applications to Sand Asphalt.  119-124. 2002
• Control of Transition in Supersonic Boundary Layers: Experiments and Computations (Keynote).  1475-1480. 2002
• Coupled Dynamic Analysis of a Mini TLP: Comparison With Measurements.  761-770. 2002
• Design of Horizontal Mechanical Presses for Deep Drawing and Ironing Process.  731-735. 2002
• Detailed Results for Nitric Oxide Emissions as Determined From a Multiple-Zone Cycle Simulation for a Spark-Ignition Engine.  American Society of Mechanical Engineers, Internal Combustion Engine Division (Publication) ICE. 131-148. 2002
• Diagnosability Analysis of Multi-Station Manufacturing Processes.  475-484. 2002
• Dynamic Response of Squeeze Film Dampers Operating With Bubbly Mixtures.  819-826. 2002
• Energy Management Strategy for a Parallel Hybrid Vehicle.  273-280. 2002
• Experiments on Effect of Jet Impingement on Heat Transfer in Annular Channels With Parallel and Counter Flows.  ASME -Publications- Htd. 39-48. 2002
• Fail Safe, High Temperature Magnetic Bearings.  1107-1116. 2002
• Fatigue Life Prediction for Short Dents in Petroleum Pipelines.  ASME -Publications- Pvp. 103-111. 2002
• Heat Transfer Coefficient on the Squealer Tip and Near Squealer Tip Regions of a Gas Turbine Blade.  ASME -Publications- Htd. 245-254. 2002
• Heat Transfer in Rotating Rectangular Cooling Channels (AR=4) With Dimples.  551-560. 2002
• Length Effects on Fatigue Behavior of Longitudinal Pipeline Dents.  1849-1858. 2002
• Maglev Linear Actuator for Nanopositioning.  377-381. 2002
• Mechanical Fault Diagnosis Using Numerical Hilbert Analysis.  919-925. 2002
• Nanoscale Quantitative Thermal Imaging of Electronic Devices.  ASME -Publications- Htd. 23-29. 2002
• Non-Contact Laser Ultrasonic Inspection for Cryogenically Introduced Interlayer Defects in Epoxy-Based Composites.  19-25. 2002
• On the Causes of Rolling Instability and Chatter.  323-332. 2002
• On the Dynamic Short-Time Scale Wave Propagation and the Characterization of Optimal Packaging Material for High Performance Electronic Packages.  269-276. 2002
• Parametric Study and Experimental Correlation of an SMA Based Damping and Passive Vibration Isolation Device.  13-26. 2002
• Predicting Mixed Mode Crack Initiation Angles in Anisotropic Materials Using the Shape of the Crack Tip Core Region.  105-113. 2002
• Predicting the Fatigue Life of Long Dents in Petroleum Pipelines.  1-9. 2002
• Predictive Modeling for Rollover Warning of Heavy Vehicles.  715-721. 2002
• Re-Assessment of Nitride Fuel Potential in the Current Context of the Nuclear Industry.  1039-1042. 2002
• STAR-H2: The Secure Transportable Autonomous Reactor for Hydrogen Production and Desalinization.  205-214. 2002
• Textured Sliders as Means to Reduce Adhesion in Ultra Low Flying Head Disk Interfaces.  51-55. 2002
• The Development of a Dual Injection Hydrogen Fueled Engine With High Power and High Efficiency.  American Society of Mechanical Engineers, Internal Combustion Engine Division (Publication) ICE. 323-333. 2002
• Thin Liquid Film Flow on a Rotating Annular Disk: Asymptotic Solution.  511-522. 2002
• Three Dimensional PDMA Assembly: Design, Process, and Applications.  55-62. 2002
• Towards Failure Modeling in Complex Dynamic Systems: Impact of Design and Manufacturing Variations.  71-81. 2002
• Transit Draft Heave and Pitch Motion Analysis of the Mobile Offshore Base (MOB) Using Reverse MI/SO Techniques.  369-381. 2002
• Turbulent Heat Transfer Measurements on a Wall With Concave and Cylindrical Dimples in a Square Channel.  459-467. 2002
• A Direct Synthesis Method for Early Stage Parametric Design of Large-Scale Mechanical Systems.  69-78. 2002
• An Overview of the Direct Energy Conversion Power Production Program.  119-123. 2002
• Analysis of Two-Phase Air/Water Bubbly Flow Experiment.  115-118. 2002
• Comparison of Cost Factors in Laser Processing of Materials and Traditional Metal Cutting Processes.  35-40. 2002
• Conceptual Analysis of Fission Fragment Magnetic Collimator Reactors.  23-29. 2002
• Constitutive Modeling of Asphalt Bound Granular Materials: Theoretical Background.  131-140. 2002
• Damage Mechanisms in Nanolayered Metallic Composites.  577-582. 2002
• Design of State-Space-Based Control Algorithms for Wind Turbine Speed Regulation.  299-309. 2002
• Flexure Behavior of Composite Spoolable Tubes.  233-237. 2002
• Heat Transfer Coefficient and Film-Cooling Effectiveness on a Gas Turbine Blade Tip.  309-318. 2002
• Heat Transfer Coefficient and Film-Cooling Effectiveness on the Squealer Tip of a Gas Turbine Blade.  1073-1082. 2002
• Linear Programming Performance Bounds for Markov Chains With Polyhedrally Translation Invariant Probabilities and Applications to Unreliable Manufacturing Systems and Enhanced Wafer Fab Models.  69-78. 2002
• Modeling of the Onset of Gas Entrainment Through a Finite-Side Branch.  911-916. 2002
• On the Adaptive Control of Mechanical Systems With Time-Varying Parameters and Disturbances.  109-117. 2002
• Periodic Disturbance Accommodating Control for Speed Regulation of Wind Turbines.  310-320. 2002
• Relationship Between Temperature Distribution and 2D Image of Condensation Jets Using Discrete Wavelets Multiresolution.  1553-1562. 2002
• Study of Cubic Splines and Fourier Series as Interpolation Techniques for Filling in Short Periods of Missing Building Energy Use and Weather Data.  15-21. 2002
• System Identification and Multivariate Controller Design for a Satellite Ultraquiet Isolation Technology Experiment (SUITE).  595-603. 2002
• Teaching Design and Automation Principles Through a National Robotics Competition.  41-46. 2002
• The Onset of Gas Entrainment From a Stratified Two-Phase Region Through a Single Side-Oriented Branch.  ASME -Publications- Htd. 171-178. 2002
• Theoretical Investigation of Autoignition of Combustible Gas Mixtures in Rapid Compression Machines.  American Society of Mechanical Engineers, Internal Combustion Engine Division (Publication) ICE. 109-121. 2002
• Thermal Property Measurements of Nanotubes, Nanowires, and Nanobelts.  ASME -Publications- Htd. 199-201. 2002
• Thoria-Based Cermet Nuclear Fuel: Cermet Fabrication and Behavior Estimates.  59-67. 2002
• Thoria-Based Cermet Nuclear Fuel: Neutronics Fuel Design and Fuel Cycle Analysis.  47-57. 2002
• Thoria-Based Cermet Nuclear Fuel: Sintered Microsphere Fabrication by Spray Drying.  111-118. 2002
• Three-Dimensional Bubble Reconstruction in a Pipe Flow Using Shadow Technique.  671-676. 2002
• Unsteady Interaction Between a Transonic Turbine Stage and Downstream Components.  371-381. 2002
• Utilization of Plutonium and Higher Actinides in the HTGR as Possibility to Maintain Long-Term Operation on One Fuel Loading.  591-597. 2002
• Design of a Decentralized Detection Filter for a Class of Interconnected Systems.  767-776. 2001
• Effect of Squealer Geometry Arrangement on Gas Turbine Blade Tip Heat Transfer.  ASME -Publications- Htd. 297-305. 2001
• Optimizing Stiffness Properties of Tensegrity Structures.  ASME -Publications- Ad. 95-104. 2001
• Towards a Biomechanical Model of the Breast: A Simulation-Based Study.  137-138. 2001
• Predicting Fly-Height Modulation and Contact Forces in Ultra-Low Flying Head-Disk Interfaces Using a Tri-State Switching Dynamic Contact Model.  27-35. 2001
• Rotordynamic force prediction of whirling centrifugal impeller shroud passages using computational fluid dynamic techniques.  Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 910-918. 2001
• A Framework for Sufficiency Estimation of Engineering Design Models.  165-175. 2001
• Evolving a Functional Basis for Engineering Design.  63-73. 2001