Full-Annulus Simulations of Airfoil Clocking in a 1-1/2 Stage Axial Compressor
Conference Paper
Overview
Research
Identity
Additional Document Info
View All
Overview
abstract
Axial compressors have inherently unsteady flow fields because of relative motion between rotor and stator airfoils. This relative motion leads to viscous and inviscid (potential) interactions between blade rows. As the number of stages increases in a turbomachine, the buildup of convected wakes can lead to progressively more complex wake/wake and wake/airfoil interactions. Variations in the relative circumferential positions of stators or rotors can change these interactions, leading to different unsteady forcing functions on airfoils and different compressor efficiencies. In addition, as the Mach number increases the interaction between blade rows can be intensified due to potential effects.It has been shown, both experimentally and computationally, that airfoil clocking can be used to improve the efficiency and reduce the unsteadiness in multiple-stage axial turbomachines with equal blade counts in alternate blade rows. While previous investigations have provided an improved understanding of the physics associated with airfoil clocking, more research is needed to determine if airfoil clocking is viable for use in modern gas-turbine compressors. This paper presents the results of a combined experimental/computational research effort to study the physics of airfoil clocking in a high-speed axial compressor. Computational simulations have been performed for eight different clocking positions of the stator airfoils in a 1-1/2 stage high-speed compressor. To accurately model the experimental compressor, full-annulus simulations were conducted using 34 IGV, 35 rotor and 34 stator airfoils. It is common practice to modify blade counts to reduce the computational work required to perform turbomachinery simulations, and this approximation has been made in all computational clocking studies performed to date. A simulation was also performed in the present study with 1 inlet guide vane, 1 rotor airfoil, and 1 stator airfoil to model blade rows with 34 airfoils each in order to examine the effects of this approximation. Time-averaged and unsteady data (including performance and boundary layer quantities) were examined. The predicted results indicate that simulating the full annulus gives better qualitative agreement with the experimental data, as well as more accurately modeling the interaction between adjacent blade rows.
name of conference
Volume 1: Aircraft Engine; Marine; Turbomachinery; Microturbines and Small Turbomachinery
