Detailed Heat Transfer Coefficient Measurements on a Scaled Realistic Turbine Blade Internal Cooling System
Academic Article
Overview
Research
Identity
Additional Document Info
Other
View All
Overview
abstract
AbstractA realistic internal cooling system of a turbine blade includes both ribs and pin-fins inside the passages to enhance the heat transfer. However, the majority studies in the open literature assessing the heat transfer characteristics on a simplified cooling model by examining ribbed-roughen passages and pin-finned passage separately. This work presents the high-resolution heat transfer coefficients of a scaled realistic turbine blade internal cooling design. The cooling system, using a 3D-printed plastic material, consists of an S-shaped inlet, four serpentine passages (three U-bends) of variable aspect ratio, and the trailing edge ejection. Angled ribs are implemented inside the passages and the elongated fins and pins are used near the trailing edge. Two dust holes are realized on the blade tip, the injections are individually controlled to reflect the realistic coolant flowrate variation inside the entire internal cooling system. The tests are conducted at two Reynolds number, 45,000 and 60,000 based on the hydraulic diameter of the inlet passage. Transient heat transfer technique using thermochromic liquid crystal is applied to obtain the detailed heat transfer characteristic inside the cooling channel. The local and averaged Nusselt numbers are also compared with the correlations in the open literature. This paper provides gas turbine designers the difference of local heat transfer distributions between the realistic and simplified internal cooling designs.
