Nonlinear rotordynamics of automotive turbochargers: Predictions and comparisons to test data
Academic Article
Overview
Research
Identity
Additional Document Info
Other
View All
Overview
abstract
AbstractPassenger vehicle turbochargers (TCs) offer increased engine power and efficiency in an ever-competitive marketplace. Turbochargers operate at high rotational speeds and use engine oil to lubricate fluid-film-bearing supports (radial and axial). However, TCs are prone to large amplitudes of subsynchronous shaft motion over wide ranges of their operating speed. Linear rotordynamic tools cannot predict the amplitudes and multiple frequency shaft motions. A comprehensive nonlinear rotordynamics model coupled to a complete fluid-film-bearing model solves in real time the dynamics of automotive turbochargers. The computational design tool predicts the limit cycle response for several inner and outer film clearances and operating conditions including rotor speed and lubricant feed pressure. Substantial savings in product development and prototype testing are the benefits of the present development. The paper presents predictions of the linear and nonlinear shaft motion of an automotive turbocharger supported on a semi-floating ring bearing. The shaft motion predictions are compared to measurements of shaft motion at the compressor nose for speeds up to 240krpm, and for lubricant inlet pressure of 4bar at 150C. Linear and nonlinear rotordynamic models reproduce very well the test data for synchronous response to imbalance. The nonlinear results show two subsynchronous whirl frequencies whose large magnitudes agree well with the measurements. A large side load predicted for this turbocharger must be considered for accurate prediction of the rotordynamic response.
