HR job title
- Deputy Director
- Contact Info
- 1 979 845 1604
Lagoudas, Dimitris Professor
Positions
- Deputy Director, Texas A&M Engineering Experiment Station (TEES), Texas A&M University
- Professor, Materials Science and Engineering, College of Engineering
- Professor, Aerospace Engineering, College of Engineering
- Faculty Affiliate, Energy Institute, Texas A&M Engineering Experiment Station (TEES)
My research involves the design, characterization and modeling of multifunctional material
systems at nano, micro and macro levels with averaging micromechanics methods developed to bridge the various length scales and functionalities including mechanical, thermal and electrical properties of nanocomposites.
systems at nano, micro and macro levels with averaging micromechanics methods developed to bridge the various length scales and functionalities including mechanical, thermal and electrical properties of nanocomposites.
- Overview
- Publications
- Research
- Teaching
- Works By Students
- Background
- Contact
- Other
- View All
Overview
Publications
selected publications
-
academic article
-
Kuner, M. C., Karakalas, A. A., & Lagoudas, D. C
(2021).
ASMADA—A tool for automatic analysis of shape memory alloy thermal cycling data under constant stress. Smart Materials and Structures.
30(12), 125003-125003.
-
Peraza Hernandez, E. A., Hartl, D. J., & Lagoudas, D. C.
(2016).
Kinematics of Origami Structures With Smooth Folds. Journal of Mechanisms and Robotics.
8(6), 061019.
-
Saunders, R. N., Boyd, J. G., Hartl, D. J., Brown, J. K., Calkins, F. T., & Lagoudas, D. C.
(2016).
A validated model for induction heating of shape memory alloy actuators. Smart Materials and Structures.
25(4), 045022-045022.
-
Gardea, F., Glaz, B., Riddick, J., Lagoudas, D. C., & Naraghi, M
(2016).
Identification of energy dissipation mechanisms in CNT-reinforced nanocomposites. Nanotechnology.
27(10), 105707-105707.
-
Peraza Hernandez, E. A., Kiefer, B., Hartl, D. J., Menzel, A., & Lagoudas, D. C.
(2015).
Analytical investigation of structurally stable configurations in shape memory alloy-actuated plates. International Journal of Solids and Structures.
69-70, 442-458.
-
Gardea, F., Glaz, B., Riddick, J., Lagoudas, D. C., & Naraghi, M
(2015).
Energy dissipation due to interfacial slip in nanocomposites reinforced with aligned carbon nanotubes. ACS APPLIED MATERIALS & INTERFACES.
7(18), 9725-9735.
-
Seidel, G. D., Chatzigeorgiou, G., Ren, X., & Lagoudas, D. C.
(2015).
Multiscale Modeling of Multifunctional Fuzzy Fibers Based on Multi-Walled Carbon Nanotubes. Springer Series in Materials Science.
188, 135-176.
-
Hartl, D., Lagoudas, D., Malak, R., Frecker, M., & Ounaies, Z.
(2014).
Active materials and structures for origami engineering. Smart Materials and Structures.
23(9), 090201-090201.
-
Haldar, K., & Lagoudas, D. C
(2014).
Constitutive modelling of magnetic shape memory alloys with discrete and continuous symmetries. PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES.
470(2169), 20140216-20140216.
-
Haldar, K., Lagoudas, D. C., & Karaman, I.
(2014).
Magnetic field-induced martensitic phase transformation in magnetic shape memory alloys: Modeling and experiments. Journal of the Mechanics and Physics of Solids.
69(1), 33-66.
-
Peraza-Hernandez, E. A., Hartl, D. J., Malak Jr, R. J., & Lagoudas, D. C.
(2014).
Origami-inspired active structures: a synthesis and review. Smart Materials and Structures.
23(9), 094001-094001.
-
Li, J., Lagoudas, D., & Bhattacharyya, A
(2014).
Biography of the Prager Medalist: Professor George Weng. ACTA MECHANICA.
225(4-5), 967-977.
-
Li, J., Lagoudas, D., & Bhattacharyya, A
(2014).
Preface to the Special Issue in Honor of Professor George J. Weng, the 2013 Prager Medalist. ACTA MECHANICA.
225(4-5), 965-966.
-
Grabchenko, A. I., Romashov, D. V., Fedorenko, D. O., Mamalis, A. G., Lagoudas, D., Fedorovich, V. A., & Baxevanis, T.
(2014).
Simulation of the effect of sintering on the integrity of diamond grains in grinding wheels. Nanotechnology Perceptions.
10(1), 42-53.
-
Gardea, F., Naraghi, M., & Lagoudas, D
(2014).
Effect of thermal interface on heat flow in carbon nanofiber composites. ACS APPLIED MATERIALS & INTERFACES.
6(2), 1061-1072.
-
Tabesh, M., Liu, B., Boyd, J. G., & Lagoudas, D. C.
(2013).
Analytical solution for the pseudoelastic response of a shape memory alloy thick-walled cylinder under internal pressure. Smart Materials and Structures.
22(9), 094007-094007.
-
Chatzigeorgiou, G., Efendiev, Y., Charalambakis, N., & Lagoudas, D. C.
(2012).
Effective thermoelastic properties of composites with periodicity in cylindrical coordinates. International Journal of Solids and Structures.
49(18), 2590-2603.
-
Pindera, M., Charalambakis, N., Lagoudas, D., & Hui, D
(2012).
Special Issue of Composites Part B: Homogenization and Micromechanics of Smart and Multifunctional Materials. Composites Part B Engineering.
43(6), 2493-2494.
-
Lagoudas, D., Hartl, D., Chemisky, Y., Machado, L., & Popov, P.
(2012).
Constitutive model for the numerical analysis of phase transformation in polycrystalline shape memory alloys. International Journal of Plasticity.
32-33, 155-183.
-
Chatzigeorgiou, G., Seidel, G. D., & Lagoudas, D. C.
(2012).
Effective mechanical properties of fuzzy fiber composites. Composites Part B Engineering.
-
Zheng, H., Luo, Z., Fang, D., Phillips, F. R., & Lagoudas, D. C.
(2012).
Reversible phase transformations in a shape memory alloy InTl nanowires observed by in situ transmission electron microscopy. Materials Letters.
-
Paula, A., Savi, M. A., & Lagoudas, D. C
(2012).
Nonlinear dynamics of a SMA large-scale space structure. Journal of the Brazilian Society of Mechanical Sciences and Engineering.
34(spe), 401-412.
-
Kumar, P. K., Desai, U., Monroe, J. A., Lagoudas, D. C., Karaman, I., Bigelow, G., & Noebe, R. D.
(2011).
Experimental investigation of simultaneous creep, plasticity and transformation of Ti50.5Pd30Ni19.5 high temperature shape memory alloy during cyclic actuation. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING.
530(1), 117-127.
-
Chatzigeorgiou, G., Efendiev, Y., & Lagoudas, D. C.
(2011).
Homogenization of aligned fuzzy fiber composites. International Journal of Solids and Structures.
48(19), 2668-2680.
-
Sager, R. J., Klein, P. J., Davis, D. C., Lagoudas, D. C., Warren, G. L., & Sue, H.
(2011).
Interlaminar fracture toughness of woven fabric composite laminates with carbon nanotube/epoxy interleaf films. J Appl Polym Sci.
121(4), 2394-2405.
-
Monroe, J. A., Karaman, I., Lagoudas, D. C., Bigelow, G., Noebe, R. D., & Padula, S.
(2011).
Determining recoverable and irrecoverable contributions to accumulated strain in a NiTiPd high-temperature shape memory alloy during thermomechanical cycling. Scripta Materialia.
65(2), 123-126.
-
Thakre, P. R., Lagoudas, D. C., Riddick, J. C., Gates, T. S., Frankland, S., Ratcliffe, J. G., Jiang Zhu, .., & Barrera, E. V.
(2011).
Investigation of the effect of single wall carbon nanotubes on interlaminar fracture toughness of woven carbon fiberepoxy composites. Journal of Composite Materials.
-
Prozzi, J
(2011).
Foreword. HIGHWAY FACILITY DESIGN.
33(2203), IX-IX.
-
Savi, M. A., De Paula, A. S., & Lagoudas, D. C
(2011).
Numerical Investigation of an Adaptive Vibration Absorber Using Shape Memory Alloys. Journal of Intelligent Material Systems and Structures.
22(1), 67-80.
-
Hartl, D. J., Chatzigeorgiou, G., & Lagoudas, D. C.
(2010).
Three-dimensional modeling and numerical analysis of rate-dependent irrecoverable deformation in shape memory alloys. International Journal of Plasticity.
26(10), 1485-1507.
-
Ayewah, D., Davis, D. C., Krishnamoorti, R., Lagoudas, D. C., Sue, H., & Willson, M.
(2010).
A surfactant dispersed SWCNT-polystyrene composite characterized for electrical and mechanical properties. Composites Part A Applied Science and Manufacturing.
41(7), 842-849.
-
Hadjiev, V. G., Warren, G. L., Sun, L., Davis, D. C., Lagoudas, D. C., & Sue, H.
(2010).
Raman microscopy of residual strains in carbon nanotube/epoxy composites. Carbon.
48(6), 1750-1756.
-
Hartl, D. J., Lagoudas, D. C., Calkins, F. T., & Mabe, J. H.
(2010).
Use of a Ni60Ti shape memory alloy for active jet engine chevron application: I. Thermomechanical characterization. Smart Materials and Structures.
19(1), 015020-015020.
-
Hartl, D. J., Mooney, J. T., Lagoudas, D. C., Calkins, F. T., & Mabe, J. H.
(2010).
Use of a Ni60Ti shape memory alloy for active jet engine chevron application: II. Experimentally validated numerical analysis. Smart Materials and Structures.
19(1), 015021-015021.
-
Lagoudas, D. C., Chatzigeorgiou, G., & Kumar, P. K
(2009).
Modeling and Experimental Study of Simultaneous Creep and Transformation in Polycrystalline High-Temperature Shape Memory Alloys. Journal of Intelligent Material Systems and Structures.
20(18), 2257-2267.
-
Warren, G. L., Sun, L., Hadjiev, V. G., Davis, D., Lagoudas, D., & Sue, H.
(2009).
B-staged epoxy/single-walled carbon nanotube nanocomposite thin films for composite reinforcement. J Appl Polym Sci.
112(1), 290-298.
-
Awasthi, A. P., Lagoudas, D. C., & Hammerand, D. C.
(2009).
Modeling of graphenepolymer interfacial mechanical behavior using molecular dynamics. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING.
17(1), 015002-015002.
-
Bertacchini, O. W., Lagoudas, D. C., & Patoor, E.
(2009).
Thermomechanical transformation fatigue of TiNiCu SMA actuators under a corrosive environment Part I: Experimental results. International Journal of Fatigue.
-
Kiefer, B., & Lagoudas, D. C
(2009).
Modeling the Coupled Strain and Magnetization Response of Magnetic Shape Memory Alloys under Magnetomechanical Loading. Journal of Intelligent Material Systems and Structures.
20(2), 143-170.
-
Seidel, G. D., & Lagoudas, D. C
(2008).
A Micromechanics Model for the Thermal Conductivity of Nanotube-Polymer Nanocomposites. J Appl Mech.
75(4), 041025-0410259.
-
Sun, L., Warren, G. L., OReilly, J. Y., Everett, W. N., Lee, S. M., Davis, D., Lagoudas, D., & Sue, H.
(2008).
Mechanical properties of surface-functionalized SWCNT/epoxy composites. Carbon.
46(2), 320-328.
-
Bisrat, Y., Luo, Z. P., Davis, D., & Lagoudas, D
(2007).
Highly ordered uniform single-crystal Bi nanowires: fabrication and characterization. Nanotechnology.
18(39), 395601-395601.
-
Karaca, H. E., Karaman, I., Basaran, B., Lagoudas, D. C., Chumlyakov, Y. I., & Maier, H. J.
(2007).
On the stress-assisted magnetic-field-induced phase transformation in Ni2MnGa ferromagnetic shape memory alloys. ACTA MATERIALIA.
55(13), 4253-4269.
-
Kiefer, B., Karaca, H. E., Lagoudas, D. C., & Karaman, I.
(2007).
Characterization and modeling of the magnetic field-induced strain and work output in magnetic shape memory alloys. Journal of Magnetism and Magnetic Materials.
312(1), 164-175.
-
Hartl, D. J., & Lagoudas, D. C.
(2007).
Aerospace applications of shape memory alloys. Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering.
221(4), 535-552.
-
Hammerand, D. C., Seidel, G. D., & Lagoudas, D. C
(2007).
Computational Micromechanics of Clustering and Interphase Effects in Carbon Nanotube Composites. Mechanics of Advanced Materials and Structures.
14(4), 277-294.
-
Karafyllidis, I. G., & Lagoudas, D. C
(2007).
Microtubules as mechanical force sensors. Biosystems.
88(1-2), 137-146.
-
Bahukudumbi, P., Everett, W. N., Beskok, A., Bevan, M. A., Huff, G. H., Lagoudas, D., & Ounaies, Z.
(2007).
Colloidal microstructures, transport, and impedance properties within interfacial microelectrodes. Applied Physics Letters.
90(22), 224102-224102.
-
Peddiraju, P., Noh, J., Whitcomb, J., & Lagoudas, D. C
(2007).
Prediction of Cryogen Leak Rate through Damaged Composite Laminates. Journal of Composite Materials.
41(1), 41-71.
-
Bhattacharyya, A., & Lagoudas, D. C
(2007).
Shape Memory Alloys. Smart Materials and Structures.
16(1), null.
-
Karaca, H. E., Karaman, I., Basaran, B., Lagoudas, D. C., Chumlyakov, Y. I., & Maier, H. J.
(2006).
One-way shape memory effect due to stress-assisted magnetic field-induced phase transformation in Ni2MnGa magnetic shape memory alloys. Scripta Materialia.
55(9), 803-806.
-
Karaman, I., Karaca, H. E., Basaran, B., Lagoudas, D. C., Chumlyakov, Y. I., & Maier, H. J.
(2006).
Stress-assisted reversible magnetic field-induced phase transformation in Ni2MnGa magnetic shape memory alloys. Scripta Materialia.
55(4), 403-406.
-
Lagoudas, D. C., Steinmann, P., & Busso, E. P
(2006).
Corrigendum. Philosophical Magazine.
86(15), 2293-2293.
-
Lagoudas, D. C
(2006).
Preface. Mechanics of Materials.
38(5-6), 389-389.
-
Oh, E., Walton, J. R., Lagoudas, D. C., & Slattery, J. C
(2006).
Evolution of stresses in a simple class of oxidation problems. ACTA MECHANICA.
181(3-4), 231-255.
-
Chen, Y., & Lagoudas, D. C
(2005).
Wave propagation in shape memory alloy rods under impulsive loads. PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES.
461(2064), 3871-3892.
-
Kiefer, B., & Lagoudas, D. C
(2005).
Magnetic field-induced martensitic variant reorientation in magnetic shape memory alloys. Philosophical Magazine.
85(33-35), 4289-4329.
-
Lee, J., Boyd, J. G., & Lagoudas, D. C.
(2005).
Effective properties of three-phase electro-magneto-elastic composites. International Journal of Engineering Science.
43(10), 790-825.
-
KARACA, H.
(2004).
Compressive response of a single crystalline CoNiAl shape memory alloy. Scripta Materialia.
51(3), 261-266.
-
Khan, M. M., Lagoudas, D. C., Mayes, J. J., & Henderson, B. K.
(2004).
Pseudoelastic SMA Spring Elements for Passive Vibration Isolation: Part I Modeling. Journal of Intelligent Material Systems and Structures.
-
Lagoudas, D. C., Khan, M. M., Mayes, J. J., & Henderson, B. K.
(2004).
Pseudoelastic SMA Spring Elements for Passive Vibration Isolation: Part II Simulations and Experimental Correlations. Journal of Intelligent Material Systems and Structures.
-
Karaca, H. E., Karaman, I., Lagoudas, D. C., Maier, H. J., & Chumlyakov, Y. I.
(2003).
Recoverable stress-induced martensitic transformation in a ferromagnetic CoNiAl alloy. Scripta Materialia.
49(9), 831-836.
-
Strelec, J. K., Lagoudas, D. C., Khan, M. A., & Yen, J
(2003).
Design and Implementation of a Shape Memory Alloy Actuated Reconfigurable Airfoil. Journal of Intelligent Material Systems and Structures.
14(4-5), 257-273.
-
Brinson, L. C., Govindjee, S., & Lagoudas, D. C
(2002).
Special Issue: Physics, Mechanics and Modeling Phase Transformations. Journal of Intelligent Material Systems and Structures.
13(12), 759-759.
-
Rediniotis, O. K., & Lagoudas, D. C
(2002).
Shape memory alloy actuators as locomotor muscles. FIXED AND FLAPPING WING AERODYNAMICS FOR MICRO AIR VEHICLE APPLICATIONS.
195, 483-500.
-
Rediniotis, O. K., Wilson, L. N., Lagoudas, D. C., & Khan, M. M
(2002).
Development of a Shape-Memory-Alloy Actuated Biomimetic Hydrofoil. Journal of Intelligent Material Systems and Structures.
13(1), 35-49.
-
Entchev, P. B., Lagoudas, D. C., & Slattery, J. C
(2001).
Effects of non-planar geometries and volumetric expansion in the modeling of oxidation in titanium. International Journal of Engineering Science.
39(6), 695-714.
-
Lagoudas, D. C., Whitcomb, J. D., Miller, D. A., Lagoudas, M. Z., & Shryock, K. J
(2000).
Continuum Mechanics in a Restructured Engineering Undergraduate Curriculum. INTERNATIONAL JOURNAL OF ENGINEERING EDUCATION.
16(4), 301-314.
-
Garner, L. J., Wilson, L. N., Lagoudas, D. C., & Rediniotis, O. K
(2000).
Development of a shape memory alloy actuated biomimetic vehicle. Smart Materials and Structures.
9(5), 673-683.
-
Bhattacharyya, A., & Lagoudas, D. C
(2000).
Special issue on shape memory alloys - Preface. Smart Materials and Structures.
9(5), U3-U3.
-
Miller, D. A., & Lagoudas, D. C
(2000).
Thermomechanical characterization of NiTiCu and NiTi SMA actuators: influence of plastic strains. Smart Materials and Structures.
9(5), 640-652.
-
Entchev,, P. B., Lagoudas,, D. C., & Iliev,, O. P
(2000).
DOMAIN TRANSFORMATION PROBLEMS IN 2-D OXIDATION. Journal of the Mechanical Behavior of Materials.
11(4), 275-294.
-
Webb, G., Kurdila, A., & Lagoudas, D
(2000).
Adaptive Hysteresis Model for Model Reference Control with Actuator Hysteresis. JOURNAL OF GUIDANCE CONTROL AND DYNAMICS.
23(3), 459-465.
-
Bhattacharyya, A., & Lagoudas, D. C
(2000).
Effective elastic moduli of two-phase transversely isotropic composites with aligned clustered fibers. ACTA MECHANICA.
145(1-4), 65-93.
-
Webb, G., Wilson, L., Lagoudas, D., & Rediniotis, O
(2000).
Adaptive Control of Shape Memory Alloy Actuators for Underwater Biomimetic Applications. 23rd Aerospace Sciences Meeting.
38(2), 325-334.
-
Chen, Y
(2000).
Impact induced phase transformation in shape memory alloys. Journal of the Mechanics and Physics of Solids.
48(2), 275-300.
-
Jonnalagadda, K. D., Sottos, N. R., Qidwai, M. A., & Lagoudas, D. C.
(2000).
In situdisplacement measurements and numerical predictions of embedded SMA transformation. Smart Materials and Structures.
-
Qidwai, M. A., & Lagoudas, D. C
(2000).
On thermomechanics and transformation surfaces of polycrystalline NiTi shape memory alloy material. International Journal of Plasticity.
16(10-11), 1309-1343.
-
WEBB, G., LAGOUDAS, D., & KURDILA, A
(1999).
Adaptive Hysteresis Compensation for SMA Actuators with Stress-Induced Variations in Hysteresis. Journal of Intelligent Material Systems and Structures.
10(11), 845-854.
-
Bo, Z., & Lagoudas, D. C
(1999).
Thermomechanical modeling of polycrystalline SMAs under cyclic loading, Part I: theoretical derivations. International Journal of Engineering Science.
37(9), 1089-1140.
-
Lagoudas, D. C., & Bo, Z
(1999).
Thermomechanical modeling of polycrystalline SMAs under cyclic loading, Part II: material characterization and experimental results for a stable transformation cycle. International Journal of Engineering Science.
37(9), 1141-1173.
-
Bo, Z., & Lagoudas, D. C
(1999).
Thermomechanical modeling of polycrystalline SMAs under cyclic loading, Part III: evolution of plastic strains and two-way shape memory effect. International Journal of Engineering Science.
37(9), 1175-1203.
-
Bo, Z., & Lagoudas, D. C
(1999).
Thermomechanical modeling of polycrystalline SMAs under cyclic loading, Part IV: modeling of minor hysteresis loops. International Journal of Engineering Science.
37(9), 1205-1249.
-
Bo, Z., Lagoudas, D. C., & Miller, D
(1999).
Material Characterization of SMA Actuators Under Nonproportional Thermomechanical Loading. Journal of Engineering Materials and Technology.
121(1), 75-85.
-
Ding, Z., & Lagoudas, D. C
(1999).
Transient heat transfer behavior of one-dimensional symmetric thermoelectric SMA actuators. Mathematical and Computer Modelling.
29(1), 33-55.
-
Blonk, B., & Lagoudas, D. C
(1998).
Actuation of elastomeric rods with embedded two-way shape memory alloy actuators. Smart Materials and Structures.
7(6), 771-783.
-
Lagoudas, D. C., Xu, S., & Ma, X
(1998).
Surface Damage Modeling of Oxidized Metal Matrix Composite Laminates under Axial and Transverse Tension. International Journal of Damage Mechanics.
7(3), 209-237.
-
Webb, G. V., Lagoudas, D. C., & Kurdila, A. J
(1998).
Hysteresis Modeling of SMA Actuators for Control Applications. Journal of Intelligent Material Systems and Structures.
9(6), 432-448.
-
Lagoudas, D. C., & Sottos, N
(1998).
Introduction. Journal of Intelligent Material Systems and Structures.
9(5), 323-323.
-
Jonnalagadda, K. D., Sottos, N. R., Qidwai, M. A., & Lagoudas, D. C
(1998).
Transformation of Embedded Shape Memory Alloy Ribbons. Journal of Intelligent Material Systems and Structures.
9(5), 379-390.
-
Lagoudas, D. C., & Bhattacharyya, A
(1997).
On the Correspondence between Micromechanical Models for Isothermal Pseudoelastic Response of Shape Memory Alloys and the Preisach Model for Hysteresis. MATHEMATICS AND MECHANICS OF SOLIDS.
2(4), 405-440.
-
Shu, S. G., Lagoudas, D. C., Hughes, D., & Wen, J. T
(1997).
Modeling of a flexible beam actuated by shape memory alloy wires. Smart Materials and Structures.
6(3), 265-277.
-
Lagoudas, D. C., Moorthy, D., Qidwai, M. A., & Reddy, J. N.
(1997).
Modeling of the Thermomechanical Response of Active Laminates with SMA Strips Using the Layerwise Finite Element Method. Journal of Intelligent Material Systems and Structures.
8(6), 476-488.
-
Lagoudas, D. C., & Ding, Z
(1997).
Solution Behavior of the Transient Heat Transfer Problem in Thermoelectric Shape Memory Alloy Actuators. SIAM Journal on Applied Mathematics.
57(1), 34-52.
-
Allen, D. H., Foulk, J. W., Helms, K., & Lagoudas, D. C
(1997).
A model for predicting the effect of environmental degradation on damage evolution of metal-matrix composites. ASTM Special Technical Publication.
1315, 29-45.
-
Entchev,, P. B., Iliev,, O. P., & Lagoudas,, D. C
(1996).
NUMERICAL SIMULATION OF A 2D OXIDE LAYER GROWTH IN AN ANISOTROPIC MEDIUM. Journal of the Mechanical Behavior of Materials.
7(1), 67-84.
-
Boyd, J. G., & Lagoudas, D. C.
(1996).
A thermodynamical constitutive model for shape memory materials. Part I. The monolithic shape memory alloy. International Journal of Plasticity.
12(6), 805-842.
-
Boyd, J. G., & Lagoudas, D. C.
(1996).
A thermodynamical constitutive model for shape memory materials. Part II. The SMA composite material. International Journal of Plasticity.
12(7), 843-873.
-
Bhattacharyya, A., Lagoudas, D. C., Wang, Y., & Kinra, V. K.
(1995).
On the role of thermoelectric heat transfer in the design of SMA actuators: theoretical modeling and experiment. Smart Materials and Structures.
4(4), 252-263.
-
DVORAK, G. J., LAGOUDAS, D. C., & HUANG, C
(1994).
FATIGUE DAMAGE AND SHAKEDOWN IN METAL MATRIX COMPOSITE LAMINATES. Mechanics of Advanced Materials and Structures.
1(2), 171-202.
-
Lagoudas, D. C., Boyd, J. G., & Bo, Z.
(1994).
Micromechanics of Active Composites With SMA Fibers. Journal of Engineering Materials and Technology.
116(3), 337-347.
-
Boyd, J. G., & Lagoudas, D. C.
(1994).
Thermomechanical Response of Shape Memory Composites. Journal of Intelligent Material Systems and Structures.
5(3), 333-346.
-
Lagoudas, D. C., & Bo, Z.
(1994).
The cylindrical bending of composite plates with piezoelectric and SMA layers. Smart Materials and Structures.
3(3), 309-317.
-
Lagoudas, D. C., & Saleh, A. M
(1993).
Geometry and Loading Effects on the Compressive Strength of Fibrous Composites. Journal of Reinforced Plastics and Composites.
12(9), 1016-1023.
-
Lagoudas, D. C., & Saleh, A. M
(1993).
Compressive Failure due to Kinking of Fibrous Composites. Journal of Composite Materials.
27(1), 83-106.
-
Lagoudas, D. C., & Tadjbakhsh, I. G
(1992).
Active flexible rods with embedded SMA fibers. Smart Materials and Structures.
1(2), 162-167.
-
Lagoudas, D. C., Tadjbakhsh, I., & Fares, N.
(1991).
A New Approach to Microbuckling of Fibrous Composites. J Appl Mech.
58(2), 473-479.
-
Ahmad, H., & Lagoudas, D. C.
(1991).
Effective Elastic Properties of FiberReinforced Concrete with Random Fibers. Journal of Engineering Mechanics.
-
Hui, C., & Lagoudas, D. C
(1990).
Stress Fields of Interface Dislocations. J Appl Mech.
57(1), 247-248.
-
Gavazzi, A. C., & Lagoudas, D. C.
(1990).
On the numerical evaluation of Eshelby's tensor and its application to elastoplastic fibrous composites. Computational Mechanics.
7(1), 13-19.
-
Lagoudas, D. C., & Edelen, D.
(1989).
Material and spatial gauge theories of solids I. Gauge constructs, geometry, and kinematics. International Journal of Engineering Science.
-
Lagoudas, D. C
(1989).
On equivalence between the classical theory of dislocations and the gauge theory of defects. International Journal of Engineering Science.
27(6), 737-738.
-
Kuner, M. C., Karakalas, A. A., & Lagoudas, D. C
(2021).
ASMADA—A tool for automatic analysis of shape memory alloy thermal cycling data under constant stress. Smart Materials and Structures.
30(12), 125003-125003.
-
book
-
Edelen, D., & Lagoudas, D. C
(2012).
Gauge Theory and Defects in Solids. Elsevier.
-
Lagoudas, D. C
(2008).
Shape Memory Alloys Modeling and Engineering Applications. Springer Science & Business Media.
-
Edelen, D., & Lagoudas, D. C
(2012).
Gauge Theory and Defects in Solids. Elsevier.
-
chapter
-
Gardea, F., Lagoudas, D., & Naraghi, M.
(2016).
Active Damping in Polymer-Based Nanocomposites. CHALLENGES IN MECHANICS OF TIME DEPENDENT MATERIALS, VOL 2.
Ralph, C., Silberstein, M., Thakre, P. R., & Singh, R. (Eds.),
Conference Proceedings of the Society for Experimental Mechanics Series.
(pp. 235-239).
Springer International Publishing.
-
Schick, J. R., Hartl, D. J., & Lagoudas, D. C.
(2012).
Incorporation of Shape Memory Alloy Actuators into Morphing Aerostructures. Morphing Aerospace Vehicles and Structures.
(pp. 231-260).
John Wiley & Sons, Ltd.
-
Shaw, J. A., Churchill, C. B., Lagoudas, D. C., & Kumar, P
(2010).
Shape Memory Alloys. Encyclopedia of Aerospace Engineering.
John Wiley & Sons, Ltd.
-
Kumar, P. K., & Lagoudas, D. C
(2008).
Introduction to Shape Memory Alloys. Shape Memory Alloys.
(pp. 1-51).
Springer US.
-
Lagoudas, D. C., Bertacchini, O. W., & Patoor, E.
(2006).
Surface Crack Development In Transformation Induced Fatigue Of Sma Actuators. Youtsos, A. G. (Eds.),
Residual Stress and Its Effects on Fatigue and Fracture: Proceedings of a Special Symposium held within the 16th European Conference of Fracture ECF16, Alexandroupolis, Greece, 3-7 July 2006.
(pp. 209-222).
Springer Netherlands.
-
Lagoudas, D. C.
(2001).
Shape Memory Alloy Actuators as Locomotor Muscles. Fixed and Flapping Wing Aerodynamics for Micro Air Vehicle Applications.
(pp. 483-500).
American Institute of Aeronautics and Astronautics.
-
Lagoudas, D. C., Garner, L. J., Rediniotis, O. K., & Wilson, N.
(1999).
Modeling and Experiments of the Hysteretic Response of an Active Hydrofoil Actuated by SMA Line Actuators. Holnicki-Szulc, J., & Rodellar, J. (Eds.),
Smart Structures.
(pp. 153-162).
Springer Netherlands.
-
Lagoudas, D. C., Bo, Z., Boyd, J. G., & Qidwai, M. A.
(1998).
Thermomechanical Modeling of Shape Memory Alloys and Composites. Guran, A., Tzou, H. S., Anderson, G. L., Natori, M., Gabbert, U., Tani, J., & Breitbach, E. (Eds.),
Structronic Systems: Smart Structures, Devices and Systems (In 2 Parts)Part I: Materials and StructuresPart II: Systems and Control.
(pp. 197-246).
WORLD SCIENTIFIC.
-
Gardea, F., Lagoudas, D., & Naraghi, M.
(2016).
Active Damping in Polymer-Based Nanocomposites. CHALLENGES IN MECHANICS OF TIME DEPENDENT MATERIALS, VOL 2.
Ralph, C., Silberstein, M., Thakre, P. R., & Singh, R. (Eds.),
Conference Proceedings of the Society for Experimental Mechanics Series.
(pp. 235-239).
Springer International Publishing.
-
conference paper
-
Peraza Hernandez, E. A., Hartl, D. J., & Lagoudas, D. C.
(2016).
Design of Origami Structures With Smooth Folds. ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1.
v002t03a018-v002t03a018.
-
Wheeler, R. W., Benafan, O., Gao, X., Calkins, F. T., Ghanbari, Z., Hommer, G., ... Turner, T. L
(2016).
Engineering Design Tools for Shape Memory Alloy Actuators: CASMART Collaborative Best Practices and Case Studies. v001t04a010-v001t04a010.
-
Peraza Hernandez, E. A., Hartl, D. J., Akleman, E., & Lagoudas, D. C.
(2016).
Modeling and analysis of origami structures with smooth folds. Computer Aided Design.
93-106.
-
Iliopoulos, A. P., Steuben, J. C., Michopoulos, J. G., Baxevanis, T., Kirk, T., & Lagoudas, D. C
(2016).
On the Thermomechanical Behavior of Ni60Ti40 Coupons via High Performance Full Field Experiments. v01at02a007-v01at02a007.
-
Wheeler, R., Ottmers, C., Hewling, B., & Lagoudas, D.
(2016).
Actuator lifetime predictions for Ni60Ti40shape memory alloy plate actuators. 35th European Mask and Lithography Conference (EMLC 2019).
98000e-98000e-11.
-
Gardea, F., Lagoudas, D. C., & Naraghi, M.
(2016).
An Experimental Study into Active Damping Mechanisms in CNT Nanocomposite
-
Cox, A., Baxevanis, T., & Lagoudas, D. C.
(2016).
Constitutive Modeling of Near-Equiatomic NiTi Shape Memory Alloys Considering Composition and Heat Treatment. EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
78-84.
-
Jape, S., Solomou, A., Baxevanis, T., & Lagoudas, D. C.
(2016).
Fracture toughness of shape memory alloy actuators: effect of transformation-induced plasticity. 35th European Mask and Lithography Conference (EMLC 2019).
98000c-98000c-10.
-
Rohmer, J. L., Peraza Hernandez, E. A., Skelton, R. E., Hartl, D. J., & Lagoudas, D. C.
(2015).
An Experimental and Numerical Study of Shape Memory Alloy-Based Tensegrity/Origami Structures. v009t12a064-v009t12a064.
-
Peraza Hernandez, E. A., Hartl, D. J., Malak, R. J., & Lagoudas, D. C.
(2015).
Analysis and Optimization of a Shape Memory Alloy-Based Self-Folding Sheet Considering Material Uncertainties. ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1.
v001t01a013-v001t01a013.
-
Wheeler, R., Saunders, R., Pickett, K., Eckert, C., Stroud, H., Fink, T., ... Lagoudas, D.
(2015).
Design of a Reconfigurable SMA-Based Solar Array Deployment Mechanism. v001t02a010-v001t02a010.
-
Jape, S., Parrinello, A., Baxevanis, T., & Lagoudas, D. C
(2015).
On the Fracture Response of Shape Memory Alloy Actuators. 165-180.
-
Saunders, R. N., Hartl, D. J., Boyd, J. G., & Lagoudas, D. C.
(2015).
Modeling and development of a twisting wing using inductively heated shape memory alloy actuators. 35th European Mask and Lithography Conference (EMLC 2019).
94310u-94310u-8.
-
Wheeler, R. W., Hartl, D. J., Chemisky, Y., & Lagoudas, D. C.
(2015).
Modeling of thermo-mechanical fatigue and damage in shape memory alloy axial actuators. 35th European Mask and Lithography Conference (EMLC 2019).
94320k-94320k-10.
-
Truong, H., Martinez, M., Ochoa, O., & Lagoudas, D.
(2015).
Experimental and computational investigations of hybrid interfaces in hybrid composite laminates
-
Agboola, B. O., & Lagoudas, D. C.
(2015).
Modeling rate dependent response of shape memory alloys using a thermo-mechanical continuum phase field approach
-
Kumar, P. K., Lagoudas, D. C., Zanca, K. J., & Lagoudas, M. Z.
(2015).
Thermomechanical characterization of high temperature SMA actuators. 35th European Mask and Lithography Conference (EMLC 2019).
617012-617012-7.
-
Peraza-Hernandez, E. A., Frei, K. R., Hartl, D. J., & Lagoudas, D. C.
(2014).
Folding patterns and shape optimization using SMA-based self-folding laminates. 35th European Mask and Lithography Conference (EMLC 2019).
90571g-90571g-13.
-
Tabesh, M., Boyd, J. G., & Lagoudas, D. C.
(2014).
Modeling size effect in the SMA response: a gradient theory. 35th European Mask and Lithography Conference (EMLC 2019).
905803-905803-11.
-
Cox, A., Baxevanis, T., & Lagoudas, D. C.
(2014).
Finite Element Analysis of Precipitation Effects on Ni-Rich NiTi Shape Memory Alloy Response. EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
65-71.
-
Baxevanis, T., Cox, A., & Lagoudas, D. C.
(2014).
Micromechanics of precipitated near-equiatomic Ni-rich NiTi shape memory alloys. ACTA MECHANICA.
1167-1185.
-
Jape, S., Baxevanis, T., & Lagoudas, D. C.
(2014).
Stable crack growth during actuation in shape memory alloys. 35th European Mask and Lithography Conference (EMLC 2019).
905802-905802-9.
-
Agboola, B. O., Baxevanis, T., Lagoudas, D. C., & ASME.
(2014).
THERMODYNAMICALLY CONSISTENT THERMOMECHANICAL MODELING OF KINETICS OF MACROSCOPIC PHASE TRANSITION IN SMA USING PHASE FIELD THEORY. ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1.
-
Gardea, F., Naraghi, M., & Lagoudas, D. C.
(2014).
The importance of interfacial resistance on the thermal behavior of carbon nanofiber/epoxy composites. 35th European Mask and Lithography Conference (EMLC 2019).
906121-906121-10.
-
Wheeler, R. W., Hartl, D. J., Chemisky, Y., Lagoudas, D. C., & ASME.
(2014).
CHARACTERIZATION AND MODELING OF THERMO-MECHANICAL FATIGUE IN EQUIATOMIC NITI ACTUATORS. ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1.
-
Saunders, R., Hartl, D., Malak, R., Lagoudas, D., & ASME.
(2014).
DESIGN AND ANALYSIS OF A SELF-FOLDING SMA-SMP COMPOSITE LAMINATE
-
Wheeler, R., Santa-Cruz, J., Hartl, D., & Lagoudas, D.
(2013).
Effect of Processing and Loading on Equiatomic NiTi Fatigue Life and Localized Failure Mechanisms. ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1.
v002t02a010-v002t02a010.
-
Cornell, S. R., Hartl, D. J., & Lagoudas, D. C.
(2013).
Experimental Validation of a Shape Memory Alloy Constitutive Model by Heterogeneous Thermal Loading Using Infrared Thermography and Digital Image Correlation. ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1.
v002t02a009-v002t02a009.
-
Santa Cruz, J., Lagoudas, D., Hartl, D., & Shryock, K.
(2013).
In-Situ Strain Localization Measurements of Shape Memory Alloy Actuators during a Research Experience for Undergraduates Program. 2002 Annual Conference.
23.725.1-23.725.16.
-
Peraza-Hernandez, E., Hartl, D., & Lagoudas, D.
(2013).
Modeling of Shape Memory Alloy Wire Meshes Using Effective Lamina Properties for Improved Analysis Efficiency. ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1.
v001t01a009-v001t01a009.
-
Lester, B. T., & Lagoudas, D. C
(2013).
Modeling of the Effective Actuation Response of SMA-MAX Phase Composites With Partially Transforming NiTi. ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1.
v002t02a016-v002t02a016.
-
Parrinello, A., Baxevanis, T., & Lagoudas, D
(2013).
On the Energy Release Rate During Global Thermo-Mechanically-Induced Phase Transformation in Shape Memory Alloys. v002t02a014-v002t02a014.
-
Lester, B. T., & Lagoudas, D. C
(2013).
Modeling of Residual Stresses in Shape Memory Alloy - Ceramic Composites
-
Machairas, T., Hartl, D. J., Saravanos, D. A., & Lagoudas, D. C.
(2013).
Multilevel Optimization of a Morphing Structure Incorporating Shape Memory Alloy Wires. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.
-
Lester, B. T., & Lagoudas, D. C.
(2013).
Modeling of Residual Stresses in Shape Memory Alloy - Ceramic Composites. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.
-
Cox, A., Baxevanis, T., & Lagoudas, D.
(2013).
Numerical Evaluation of the Effect of Ni4Ti3 Precipitates on the Overall Thermo-Mechanical Response of NiTi Shape Memory Alloys. v002t02a012-v002t02a012.
-
Chawla, S., Gardea, F., Lagoudas, D., & Naraghi, M
(2012).
Carbon nanofibers as a means to enhance composites fracture toughness. 325-332.
-
Tabesh, M., Rohmer, J., Boyd, J. G., Lagoudas, D. C., Atli, K. C., Franco, B. E., & Karaman, I.
(2012).
Design of a Multiple-Actuation Shape Memory Alloy Pipe Coupler: Material Development and Characterization. 1683-1694.
-
Parrinello, A., Baxevanis, T., Lagoudas, D., & Cox, A
(2012).
A Finite Element Study of Stable Crack-Growth in Superelastic Shape Memory Alloys. ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1.
1-7.
-
Agboola, B. O., Hartl, D. J., & Lagoudas, D. C.
(2012).
A Study of Actuation Fatigue of Shape Memory Alloy. ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1.
287-293.
-
Tabesh, M., Liu, B., Boyd, J., & Lagoudas, D.
(2012).
Analytical Solution for Pseudoelastic Response of a Shape Memory Alloy Thick-Walled Cylinder Under Internal Pressure. ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1.
223-236.
-
Oehler, S. D., Hartl, D. J., Lopez, R., Malak, R. J., & Lagoudas, D. C.
(2012).
Design optimization and uncertainty analysis of SMA morphing structures. Smart Materials and Structures.
094016-094016.
-
Tabesh, M., Lester, B., Hartl, D., & Lagoudas, D.
(2012).
Influence of the Latent Heat of Transformation and Thermomechanical Coupling on the Performance of Shape Memory Alloy Actuators. ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1.
237-248.
-
Baxevanis, T., Lagoudas, D., & Landis, C
(2012).
Mode I Steady Crack-Growth in Superelastic Shape Memory Alloys. ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1.
33-38.
-
Lester, B. T., & Lagoudas, D. C
(2012).
Modeling of Hybrid Shape Memory Alloy Composites Incorporating MAX Phase Ceramics. ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1.
69-77.
-
Tabesh, M., Atli, K. C., Rohmer, J., Franco, B. E., Karaman, I., Boyd, J. G., & Lagoudas, D. C.
(2012).
Design of shape memory alloy pipe couplers: modeling and experiments. 35th European Mask and Lithography Conference (EMLC 2019).
83430j-83430j-18-83430J-18.
-
Oehler, S. D., Hartl, D. J., Turner, T. L., & Lagoudas, D. C.
(2012).
Modeling fluid structure interaction with shape memory alloy actuated morphing aerostructures. 35th European Mask and Lithography Conference (EMLC 2019).
834305-834305-12.
-
Hartl, D. J., Solomou, A., Lagoudas, D. C., & Saravanos, D.
(2012).
Phenomenological modeling of induced transformation anisotropy in shape memory alloy actuators. 35th European Mask and Lithography Conference (EMLC 2019).
83421m-83421m-14.
-
Lester, B. T., & Lagoudas, D. C.
(2012).
Computational micromechanical modeling of ceramic-SMA composites. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.
-
Lester, B. T., & Lagoudas, D. C.
(2012).
Computational micromechanical modeling of ceramic-SMA composites
-
Fitch, D., Shryock, K., & Lagoudas, D.
(2012).
Creating a Support Network for Students through a Student-led Mentoring Program. 2002 Annual Conference.
25.353.1-25.353.9.
-
Baxevanis, T., Chemisky, Y., & Lagoudas, D. C.
(2012).
Finite element analysis of the plane strain crack-tip mechanical fields in pseudoelastic shape memory alloys. Smart Materials and Structures.
094012-094012.
-
Richard, J., Shryock, K., & Lagoudas, D.
(2012).
Integrating Aerospace Research Materials into a Project-based First-year Engineering Design Course. 2002 Annual Conference.
25.793.1-25.793.18.
-
Hernandez, E., Das, K., Lagoudas, D. C., & ASEE.
(2012).
MECHANICAL CHARACTERIZATION OF SN AND SHAPE MEMORY ALLOY INTL NANOWIRES AS PART OF AN UNDERGRADUATE RESEARCH EXPERIENCE. 2002 Annual Conference.
-
Lester, B. T., Chemisky, Y., Lagoudas, D. C., Geltmacher, A. B., Everett, R. K., Qidwai, S. M., & ASME.
(2012).
VIRTUAL PROCESSING OF HYBRID SHAPE MEMORY ALLOY COMPOSITES. ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1.
441-+.
-
Hartl, D. J., Lagoudas, D. C., & Calkins, F. T.
(2011).
Advanced methods for the analysis, design, and optimization of SMA-based aerostructures. Smart Materials and Structures.
094006-094006.
-
Volk, B. L., Lagoudas, D. C., & Maitland, D. J.
(2011).
Characterizing and modeling the free recovery and constrained recovery behavior of a polyurethane shape memory polymer. Smart Materials and Structures.
940041-9400418.
-
Oehler, S. D., Hartl, D. J., & Lagoudas, D. C.
(2011).
Analysis and optimization of improved hybrid SMA flexures for high rate actuation. 35th European Mask and Lithography Conference (EMLC 2019).
797907-797907-12.
-
Das, K., Whitcomb, J., & Lagoudas, D.
(2011).
Analysis of a Microstructure for Highly Reflective Thermal Radiation Barrier Coatings. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.
-
Shryock, K., Das, K., Oehler, S., Richard, J., & Lagoudas, D.
(2011).
Bringing Smart Materials Applications into a Project-Based First-Year Engineering Course. 2002 Annual Conference.
22.298.1-22.298.14.
-
Calhoun, C., & Lagoudas, D.
(2011).
Microstructural Effects on Actuation Fatigue Life of Ni-rich NiTi Shape Memory Alloy Actuators. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.
-
Haldar, K., & Lagoudas, D. C.
(2011).
Model predictions of strain and magnetization responses under magneto-thermo-mechanical loading paths in magnetic shape memory alloys. 35th European Mask and Lithography Conference (EMLC 2019).
79781n-79781n-10.
-
Baxevanis, T., Chemisky, Y., & Lagoudas, D.
(2011).
On the path-dependency of the J-integral in a pseudoelastic shape memory alloy. 347-353.
-
Parish, J., Shryock, K., & Lagoudas, D.
(2011).
Shifting to a Student-Focused Introductory Course for Freshman Students. 2002 Annual Conference.
22.1287.1-22.1287.14.
-
Kumar, P. K., Caer, C., Atkinson, G., Patoor, E., & Lagoudas, D. C.
(2011).
The influence of stress and temperature on the residual strain generated during pseudoelastic cycling of NiTi SMA wires. 35th European Mask and Lithography Conference (EMLC 2019).
79781e-79781e-9.
-
Lester, B. T., Chemisky, Y., & Lagoudas, D. C.
(2011).
Transformation characteristics of shape memory alloy composites. Smart Materials and Structures.
094002-094002.
-
Lester, B. T., Chemisky, Y., Geltmacher, A., Qidwei, S. M., & Lagoudas, D. C.
(2011).
Virtual processing of hybrid SMA composites through martensitic transformation. 35th European Mask and Lithography Conference (EMLC 2019).
79781l-79781l-9.
-
Oehler, S., Hartl, D., Lagoudas, D., & Malak, R.
(2011).
Design Optimization of a Shape Memory Alloy Actuated Morphing Aerostructure. ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1.
421-429.
-
Charalambakis, N., Chatzigeorgiou, G., Efendiev, Y., & Lagoudas, D.
(2011).
Effective behavior of composite structures made of thermoelastic constituents with cylindrical periodicity. Procedia Engineering.
3602-3607.
-
Haldar, K., Lagoudas, D. C., Basaran, B., Karaman, I., & ASME.
(2010).
CONSTITUTIVE MODELING OF MAGNETO-THERMO-MECHANICAL RESPONSE OF FIELD-INDUCED PHASE TRANSFORMATIONS IN NiMnCoIn MAGNETIC SHAPE MEMORY ALLOYS. ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1.
193-201.
-
Kumar, P. K., Desai, U., Chatzigeorgiou, G., Lagoudas, D. C., Monroe, J., Karaman, I., Noebe, R., & Bigelow, G.
(2010).
Experiment and modeling of simultaneous creep, plasticity and transformation of high temperature shape memory alloys during cyclic actuation. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.
-
Nolan, J. M., Hartl, D. J., Lagoudas, D. C., & Grummon, D. S.
(2010).
3D finite element analysis of indentation recovery due to the shape memory effect. 35th European Mask and Lithography Conference (EMLC 2019).
76440m-76440m-10.
-
Haldar, K., Lagoudas, D. C., Basaran, B., & Karaman, I.
(2010).
Constitutive modeling of magneto-mechanical coupling response of magnetic field-induced phase transformations in NiMnCoIn magnetic shape memory alloys. 35th European Mask and Lithography Conference (EMLC 2019).
764410-764410-9.
-
Kumar, P. K., Desai, U., Monroe, J., Lagoudas, D. C., Karaman, I., Noebe, R., & Bigelow, G.
(2010).
Phase transformation and creep behavior in Ti 50 Pd 30 Ni 20 high temperature shape memory alloy in compression. 35th European Mask and Lithography Conference (EMLC 2019).
76440q-76440q-7.
-
Volk, B. L., Lagoudas, D. C., Maitland, D. J., & ASME.
(2010).
CHARACTERIZING AND MODELING THE FREE RECOVERY AND CONSTRAINED RECOVERY BEHAVIOR OF A POLYURETHANE SHAPE MEMORY POLYMER. ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1.
253-260.
-
Chatzigeorgiou, G., Chemisky, Y., Lagoudas, D. C., & ASME.
(2010).
MODELING OF CYCLIC RESPONSE OF HIGH TEMPERATURE SHAPE MEMORY ALLOYS UNDERGOING VISCOPLASTIC MECHANISMS. ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1.
187-192.
-
Chemisky, Y., Lagoudas, D., Piotrowski, B., Patoor, E., Ben-Zineb, T., & ASME.
(2010).
MODELING OF PRECIPITATION EFFECTS ON THE THERMOMECHANICAL BEHAVIOR OF NITI SMA. ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1.
245-251.
-
Lester, B., Chemisky, Y., Lagoudas, D., & ASME.
(2010).
NUMERICAL PREDICTION OF EFFECTIVE TRANSFORMATION PROPERTIES OF HYBRID SMA-CERAMIC COMPOSITES. ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1.
97-104.
-
Chatzigeorgiou, G., Haldar, K., & Lagoudas, D. C.
(2010).
Stability of the magnetomechanical problem in magnetic shape memory alloys. 35th European Mask and Lithography Conference (EMLC 2019).
76440y-76440y-8.
-
Lagoudas, D. C., Thakre, P. R., & Klein, P. J.
(2010).
Synthesis and characterization of multifunctional nanocomposites of toughened epoxy reinforced with carbon nanotubes. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.
-
Warren, G., Sun, L., Moghbelli, E., White, K., Davis, D., Lagoudas, D., & Sue, H. J.
(2009).
B-staged interleaf-toughened epoxy/SWCNT nanocomposites for VARTM applications. International Sampe Symposium and Exhibition.
-
Hartl, D., & Lagoudas, D.
(2009).
Modeling of Stress Concentrations in SMA Components Considering Plastic and Viscoplastic Yielding. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.
-
Bertacchini, O. W., Lagoudas, D. C., Calkins, F. T., & Mabe, J. H
(2009).
Transformation induced cyclic behavior and fatigue properties of nickel rich niti shape memory alloy actuators. 199-206.
-
Hartl, D. J., & Lagoudas, D. C.
(2009).
Constitutive modeling and structural analysis considering simultaneous phase transformation and plastic yield in shape memory alloys. Smart Materials and Structures.
104017-104017.
-
Lagoudas, D. C., & Kumar, P. K
(2009).
Interaction of creep with the martensitic transformation in TiPdNi High Temp erature Shape Memory Alloys. 06020.
-
Seidel, G. D., & Lagoudas, D. C
(2009).
A Micromechanics Model for the Electrical Conductivity of Nanotube-Polymer Nanocomposites. Journal of Composite Materials.
917-941.
-
Hartl, D. J., & Lagoudas, D. C.
(2009).
Experimental investigation and 3-D modeling of rate-dependent irrecoverable deformation in shape memory alloys. 35th European Mask and Lithography Conference (EMLC 2019).
72890l-72890l-10.
-
Chatzigeorgiou, G. E., & Lagoudas, D. C.
(2009).
A constitutive model for high temperature SMAs exhibiting viscoplastic behavior. 35th European Mask and Lithography Conference (EMLC 2019).
72890u-72890u-7.
-
Seidel, G. D., Boehringer, K. L., & Lagoudas, D. C.
(2009).
Computational micromechanics analysis of the effects of interphase regions and bundle packing on the effective electrical properties of carbon nanotube-polymer nanocomposites. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.
-
Kumar, P. K., & Lagoudas, D. C.
(2009).
Creep behavior in TiPdNi high temperature shape memory alloy. 35th European Mask and Lithography Conference (EMLC 2019).
72890o-72890o-6.
-
Thakre, P. R., & Lagoudas, D. C.
(2009).
Multifunctional Multi-Scale Carbon-Fiber/Epoxy Matrix Composites Reinforced With Carbon Nanotubes. 153-160.
-
Bertacchini, O. W., Schick, J., & Lagoudas, D. C.
(2009).
Parametric study and characterization of the isobaric thermomechanical transformation fatigue of nickel-rich NiTi SMA actuators. 35th European Mask and Lithography Conference (EMLC 2019).
72890p-72890p-12.
-
Kirkpatrick, K., Valasek, J., & Lagoudas, D
(2009).
Active Length Control of Shape Memory Alloy Wires Via Reinforcement Learning. 267-276.
-
Lagoudas, D. C., & Chatzigeorgiou, G
(2009).
Asymptotic Expansion Homogenization Method for Carbon Fiber Composite Structures Reinforced With Carbon Nanotubes. 291-292.
-
Lagoudas, D. C., Chatzigeorgiou, G., Hartl, D. J., & Kumar, P. K.
(2009).
Coexistense of Creep and Transformation in High Temperature Shape Memory Alloys. 45-51.
-
Lagoudas, D. C., Haldar, K., Basaran, B., & Karaman, I.
(2009).
Constitutive Modeling of Magnetic Field-Induced Phase Transformation in NiMnCoIn Magnetic Shape Memory Alloys. 317-324.
-
Phillips, F. R., Zheng, H., Lagoudas, D. C., & Karaman, I.
(2009).
Size Effect on the Phase Transformation of In-21at%Tl Nanowires. 327-333.
-
Hartl, D., Chatzigeorgiou, G., & Lagoudas, D.
(2009).
Three-Dimensional Modeling of Rate-Dependent Deformation in Shape Memory Alloys at High Temperatures. 309-316.
-
Thakre, P. R., Bisrat, Y., & Lagoudas, D. C
(2008).
Characterization of thermo-electric interface material with carbon nanotubes. AMORPHOUS AND POLYCRYSTALLINE THIN-FILM SILICON SCIENCE AND TECHNOLOGY-2008.
143-148.
-
Hartl, D. J., Mooney, J. T., Lagoudas, D. C., Mabe, J. H., & Calkins, F. T.
(2008).
Experimentally validated numerical analysis of aerostructures incorporating shape memory alloys. 35th European Mask and Lithography Conference (EMLC 2019).
692913-692913-11.
-
Padula II, S. A., Gaydosh, D. J., Noebe, R. D., Bigelow, G. S., Garg, A., Lagoudas, D., Karaman, I., & Atli, K. C.
(2008).
Influence of test procedures on the thermomechanical properties of a 55NiTi shape memory alloy. 35th European Mask and Lithography Conference (EMLC 2019).
692912-692912-11.
-
Hartl, D. J., & Lagoudas, D. C.
(2008).
Simultaneous transformation and plastic deformation in shape memory alloys. 35th European Mask and Lithography Conference (EMLC 2019).
69291d-69291d-10.
-
Seidel, G. D., & Lagoudas, D. C.
(2008).
Micromechanics modeling of polymer nanocomposites for use as multifunctional materials. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.
-
Volk, B. L., Lagoudas, D. C., & Chen, Y.
(2008).
Thermomechanical characterization of the nonlinear rate-dependent response of shape memory polymers. 35th European Mask and Lithography Conference (EMLC 2019).
69291b-69291b-9.
-
Bertacchini, O. W., Lagoudas, D. C., Calkins, F. T., & Mabe, J. H.
(2008).
Thermomechanical cyclic loading and fatigue life characterization of nickel rich NiTi shape-memory alloy actuators. 35th European Mask and Lithography Conference (EMLC 2019).
692916-692916-11.
-
Seidel, G. D., Boehringer, K. L., & Lagoudas, D. C
(2008).
Analysis of Clustering and Interphase Region Effects on the Electrical Conductivity of Carbon Nanotube-Polymer Nanocomposites via Computational Micromechanics. 159-165.
-
Hartl, D. J., & Lagoudas, D. C.
(2008).
Analysis of simultaneous transformation and plastic deformation in Shape Memory Alloys. 431-439.
-
Lagoudas, D. C., Kiefer, B., & Haldar, K
(2008).
Magneto-Mechanical Finite Element Analysis of Magnetic Shape Memory Alloys With Body Force and Body Couple. ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1.
481-490.
-
Hartl, D., Mooney, J., & Lagoudas, D.
(2008).
Numerically Implemented Constitutive Model for SMA Applications Experiencing General Loads Resulting in Plastic Deformation and Large Rotations. 421-429.
-
Volk, B. L., & Lagoudas, D. C
(2008).
Thermomechanical characterization of shape memory polymers. 592-600.
-
Klein, P. J., Warren, G. L., Sager, R. J., Sue, H. J., & Lagoudas, D. C.
(2007).
B-staged carbon nanotube/epoxy films for the improvement of interlaminar fracture toughness
-
Sager, R. J., Zhang, Q., Klein, P., Liu, J., Dai, L., Lagoudas, D., & Baur, J
(2007).
Effect of carbon nanotubes on the interfacial shear strength of T650/35 carbon fiber in an epoxy matrix using the single fiber fragmentation test
-
Bisrat, Y., Chen, C. C., Luo, Z. P., Chao, C. G., Davis, D., & Lagoudas, D
(2007).
Fabrication of Bi Nanowires Using a Vacuum Melting and Mechanical Injection Technique. 21-24.
-
Davis, D. C., Lagoudas, D. C., Barrera, E. V., Sayer, B., Ayewah, D., & Rojas, G
(2007).
Interlaminar shear strength of a nanocomposite
-
Warren, G. L., Sun, L., Lee, S. M., O'Reilly, J. Y., Davis, D., Lagoudas, D., & Sue, H. J.
(2007).
Mechanical properties of surface-functionalized epoxy/swnt nanocomposites
-
Hadjiev, V. G., Davis, D. C., Lagoudas, D. C., & Strong, K. L
(2007).
Spectroscopic imaging of polymer nanocomposites containing carbon fillers
-
Seidel, G. D., & Lagoudas, D. C
(2007).
Micromechanics aspects of multi-scale modeling of multi-functional nanocomposites: Effective thermal conductivity. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.
5594-5605.
-
Hartl, D. J., & Lagoudas, D. C.
(2007).
Characterization and 3-D modeling of Ni60Ti SMA for actuation of a variable geometry jet engine chevron. 35th European Mask and Lithography Conference (EMLC 2019).
65293z-65293z-12.
-
Machado, L. G., Lagoudas, D. C., & Savi, M. A.
(2007).
Nonlinear dynamics and chaos in a shape memory alloy pseudoelastic oscillator. 35th European Mask and Lithography Conference (EMLC 2019).
65250y-65250y-10.
-
Lagoudas, D. C., Machado, L. G., & Savi, M. A.
(2007).
Nonlinear dynamics in a pseudoelastic oscillator: Non-isothermal oscillations. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.
4023-4034.
-
Kumar, P. K., & Lagoudas, D. C.
(2007).
Thermomechanical characterization of a TiPdNi high temperature SMA under tension. 35th European Mask and Lithography Conference (EMLC 2019).
65262e-65262e-8.
-
Seidel, G. D., Bisrat, Y., & Lagoudas, D. C
(2007).
Electrical and Thermal Conductivities of Carbon Nanotube-Epoxy Composites: Modeling and Characterization. 245-253.
-
Ko, F. K., Rosenberg, N., Lagoudas, D., Gates, T., Lam, H., & Titchenal, N
(2006).
DMA testing of vapor grown carbon nanofiber reinforced epoxy. International Sampe Symposium and Exhibition.
-
Oh, B., Kawatsuji, Y., Kinra, V., & Lagoudas, D.
(2006).
An Experimental Investigation of the Effect of Thermal Shock on Damage in Cryogenic Composite Laminates. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.
5103-5110.
-
Kiefer, B., & Lagoudas, D. C.
(2006).
Application of a magnetic SMA constitutive model in the analysis of magnetomechanical boundary value problems. 35th European Mask and Lithography Conference (EMLC 2019).
617017-617017-12.
-
Bisrat, Y., Chen, C. C., Luo, Z. P., Chao, C. G., Davis, D., & Lagoudas, D.
(2006).
Fabrication of Bi Nanowires Using a Vacuum Melting and Mechanical Injection Technique. American Society of Mechanical Engineers, Materials Division (Publication) MD.
21-24.
-
Seidel, G. D., Lagoudas, D. C., Frankland, S., & Gates, T. S.
(2006).
Micromechanics modeling of functionally graded interphase regions in carbon nanotube-polymer composites. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.
1005-1019.
-
Awasthi, A. P., Lagoudas, D. C., & Hammerand, D. C.
(2006).
Modeling of interface behavior in carbon nanotube composites. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.
996-1004.
-
Kiefer, B., & Lagoudas, D. C.
(2006).
Modeling of the stress- And magnetic field-induced variant reorientation in MSMAs. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.
2106-2120.
-
Machado, L. G., & Lagoudas, D. C.
(2006).
Nonlinear dynamics of a SMA passive vibration damping device. 35th European Mask and Lithography Conference (EMLC 2019).
61690x-61690x-12.
-
Thakre, P. R., Lagoudas, D. C., Zhu, J., Barrera, E. V., & Gates, T. S.
(2006).
Processing and characterization of epoxy/SWCNT/woven fabric composites. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.
3256-3266.
-
Lagoudas, D. C., Bertacchini, O. W., & Patoor, E.
(2006).
Surface Crack Development In Transformation Induced Fatigue Of Sma Actuators. 209-222.
-
Lagoudas, D. C., Kiefer, B., & Broederdorf, A. J
(2006).
Accurate Interpretation of Magnetic Shape Memory Alloy Experiments Utilizing Coupled Magnetostatic Analysis. ASME -Publications- Ad.
311-321.
-
Lagoudas, D. C., Thakre, P. R., & Benzerga, A. A.
(2006).
Nanoindentation of CNT reinforced epoxy nanocomposites. 649-650.
-
Ayewah, D. O., Davis, D. C., Lagoudas, D. C., & Krishnamoorti, R
(2006).
Strength and Fracture of a Multifunctional Polystyrene Nanocomposite. American Society of Mechanical Engineers, Materials Division (Publication) MD.
427-431.
-
Lagoudas, D. C., Bertacchini, O. W., & Patoor, E
(2006).
Surface crack development in transformation induced fatigue of SMA actuators. 1309-1310.
-
Hartl, D., Volk, B., Lagoudas, D. C., Calkins, F., & Mabe, J.
(2006).
Thermomechanical Characterization and Modeling of Ni60Ti40 SMA for Actuated Chevrons. ASME -Publications- Ad.
281-290.
-
Lagoudas, D. C., & Popov, P
(2005).
A three-phase model of shape-memory alloys undergoing complex thermomechanical loading paths. 35th European Mask and Lithography Conference (EMLC 2019).
-
Peddiraju, P., Grenoble, R., Fried, K., Gates, T., & Lagoudas, D. C.
(2005).
Analytical predictions and experimental measurements of hydrogen permeability in a microcrack damaged composite. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.
3515-3530.
-
Seidel, G. D., Lagoudas, D. C., Frankland, S., & Gates, T. S.
(2005).
Modeling functionally graded interphase regions in carbon nanotubes reinforced composites. 632-644.
-
Kiefer, B., & Lagoudas, D. C.
(2005).
Modeling of the magnetic field-induced martensitic variant reorientation and the associated magnetic shape memory effect in MSMAs. 35th European Mask and Lithography Conference (EMLC 2019).
454-465.
-
Lagoudas, D. C., Machado, L. G., & Lagoudas, M.
(2005).
Nonlinear vibration of a one-degree of freedom shape memory alloy oscillator: A numerical-experimental investigation. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.
3937-3954.
-
Lagoudas, D. C., & Seidel, G. D
(2004).
Effective elastic properties of carbon nanotube reinforced composites. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.
2967-2988.
-
Noh, J., Peddiraju, P., Oh, B., Ganpatye, A., Maslov, K., Whitcomb, J., Kinra, V., & Lagoudas, D.
(2004).
Prediction of permeability of cryogenic composites. International Sampe Symposium and Exhibition.
3744-3758.
-
Froyd, J., Caso, R., & Lagoudas, D
(2004).
Concept inventories for shape memory alloys and piezoelectric materials. 2001 Annual Conference Proceedings.
2235-2242.
-
Noh, J., Peddiraju, P., Oh, B., Ganpatye, A., Maslov, K., Whitcomb, J., Kinra, V., & Lagoudas, D.
(2004).
Prediction of permeability of cryogenic composites. 3761-3775.
-
Entchev, P. B., & Lagoudas, D. C.
(2004).
Modeling of the transformation-induced plasticity in SMAs and porous SMAs. JOURNAL DE PHYSIQUE IV.
153-153.
-
Lagoudas, D., Peddiraju, P., Noh, J., & Whitcomb, J.
(2004).
Numerical Modelling of Cryogen Leakage Through Composite Laminates. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.
3761-3771.
-
Noh, J., Whitcomb, J., Peddiraju, P., & Lagoudas, D.
(2004).
Prediction of Leakage Rate Through Damage Network in Cryogenic Composite Laminates. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.
3748-3760.
-
Lee, J., Boyd IV, J. G., & Lagoudas, D. C.
(2003).
Effective properties of three-phase electro-magneto-elastic multifunctional composite materials. 35th European Mask and Lithography Conference (EMLC 2019).
70-80.
-
Ganpatye, A. S., Oh, B., Maslov, K., Kinra, V. K., & Lagoudas, D. C.
(2003).
Mechanical characterization and ultrasonic NDE of cryogenic composites. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.
315-322.
-
Boyd IV, J. G., Lagoudas, D. C., & Seo, C.
(2003).
Arrays of micro-electrodes and electromagnets for processing of electro-magneto-elastic multifunctional composite materials. 35th European Mask and Lithography Conference (EMLC 2019).
268-277.
-
Pachalla, R. S., Lagoudas, D. C., & Girimaji, S. S.
(2003).
Oscillatory forced-convection-cooled compact SMA actuator. 35th European Mask and Lithography Conference (EMLC 2019).
287-299.
-
Kinra, V., Lagoudas, D., & Whitcomb, J.
(2003).
Mechanical Characterization and Ultrasonic NDE of Cryogenic Composites
-
Godard, O. J., Lagoudas, M. Z., & Lagoudas, D. C.
(2003).
Design of space systems using shape memory alloys. 35th European Mask and Lithography Conference (EMLC 2019).
545-558.
-
Jun, H. Y., Allen, R. D., Lagoudas, D. C., & Rediniotis, O. K.
(2003).
Development of the fuel-powered compact SMA actuator: second-generation actuator. 35th European Mask and Lithography Conference (EMLC 2019).
135-146.
-
Bertacchini, O. W., Lagoudas, D. C., & Patoor, E.
(2003).
Fatigue life characterization of shape memory alloys undergoing thermomechanical cyclic loading. 35th European Mask and Lithography Conference (EMLC 2019).
612-624.
-
Mani, R., Lagoudas, D. C., & Rediniotis, O. K.
(2003).
MEMS-based active skin for turbulent drag reduction. 35th European Mask and Lithography Conference (EMLC 2019).
9-20.
-
Lagoudas, D. C., & Popov, P.
(2003).
Numerical studies of wave propagation in polycrystalline shape memory alloy rods. 35th European Mask and Lithography Conference (EMLC 2019).
294-304.
-
Khan, M. M., Lagoudas, D. C., & Rediniotis, O. K.
(2003).
Thermoelectric SMA actuator: preliminary prototype testing. 35th European Mask and Lithography Conference (EMLC 2019).
147-155.
-
Lagoudas, D. C., Entchev, P. B., & Kumar, P. K.
(2003).
Thermomechanical Characterization of SMA Actuators Under Cyclic Loading. ASME -Publications- Ad.
211-217.
-
Li, J., Catherine Brinson, L., & Lagoudas, D
(2003).
Constitutive Relations of Advanced Materials: Introduction. ASME Applied Mechanics Division -Publications- Amd.
59.
-
Penrod, L., Talley, D., Froyd, J., Caso, R., Lagoudas, D., & Kohutek, T
(2002).
Integrating "smart" materials into a first-year engineering curriculum: A case study. 2010 IEEE FRONTIERS IN EDUCATION CONFERENCE (FIE).
-
Rediniotis, O. K., Lagoudas, D. C., Mani, R., & Karniadakis, G.
(2002).
Active skin for turbulent drag reduction . 35th European Mask and Lithography Conference (EMLC 2019). 122-134.
-
Lagoudas, D. C., Entchev, P. B., & Vandygriff, E. L.
(2002).
Effect of transformation induced plasticity on the mechanical behavior of porous SMAs . 35th European Mask and Lithography Conference (EMLC 2019). 224-234.
-
Strelec, J. K., & Lagoudas, D. C.
(2002).
Fabrication and testing of a shape memory alloy actuated reconfigurable wing . 35th European Mask and Lithography Conference (EMLC 2019). 267-280.
-
Rediniotis, O. K., Lagoudas, D. C., Jun, H. Y., & Allen, R. D.
(2002).
Fuel-powered compact SMA actuator . 35th European Mask and Lithography Conference (EMLC 2019). 441-453.
-
Khan, M. M., & Lagoudas, D. C.
(2002).
Modeling of shape memory alloy pseudoelastic spring elements using Preisach model for passive vibration isolation . 35th European Mask and Lithography Conference (EMLC 2019). 336-347.
-
Rediniotis, O., Lagoudas, D., Mani, R., Traub, L., Allen, R., & Karniadakis, G.
(2002).
Computational and experimental studies of an active skin for turbulent drag reduction
-
Rediniotis, O. K., Wilson, L. N., Lagoudas, D. C., & Khan, M. M.
(2002).
Development of a Shape-Memory-Alloy Actuated Biomimetic Hydrofoil. Journal of Intelligent Material Systems and Structures.
35-49.
-
Lagoudas, D. C., & Vandygriff, E. L.
(2002).
Processing and Characterization of NiTi Porous SMA by Elevated Pressure Sintering. Journal of Intelligent Material Systems and Structures.
837-850.
-
Lagoudas, D. C., Khan, M. M., Mayes, J. J., & Henderson, B. K
(2002).
Parametric Study and Experimental Correlation of an SMA Based Damping and Passive Vibration Isolation Device. 13-26.
-
Lagoudas, D. C., Khan, M. M., & Mayes, J. J
(2001).
Modelling of shape memory alloy springs for passive vibration isolation. ASME -Publications- Ad.
259-270.
-
Rong, L. J., Miller, D. A., & Lagoudas, D. C
(2001).
Thermo-mechanical fatigue and transformation behavior of TiNiCuSMA. EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
329-332.
-
Lagoudas, D. C., Mayes, J. J., & Khan, M. M.
(2001).
Simplified shape memory alloy (SMA) material model for vibration isolation . 35th European Mask and Lithography Conference (EMLC 2019). 452-461.
-
Mayes, J. J., Lagoudas, D. C., & Kyle Henderson, B.
(2001).
An experimental investigation of shape memory alloy springs for passive vibration isolation
-
Lagoudas, D. C., Entchev, P. B., & Vandygriff, E. L.
(2001).
Fabrication, modeling, and characterization of porous shape memory alloys. 35th European Mask and Lithography Conference (EMLC 2019).
141-150.
-
Lagoudas, D. C., Entchev, P. B., Qidwai, M. A., & DeGiorgi, V. G
(2000).
Micromechanics of porous shape memory alloys. ASME -Publications- Ad.
41-50.
-
Lagoudas, D. C., Li, C., Miller, D. A., & Rong, L
(2000).
Thermomechanical transformation fatigue of SMA actuators. ASME -Publications- Ad.
1-11.
-
Lagoudas, D. C., Strelec, J. K., Yen, J., & Khan, M. A.
(2000).
Intelligent design optimization of a shape-memory-alloy-actuated reconfigurable wing . 35th European Mask and Lithography Conference (EMLC 2019). 338-348.
-
Lagoudas, D. C., Entchev, P. B., Vandygriff, E. L., Qidwai, M. A., & DeGiorgi, V. G.
(2000).
Modeling of thermomechanical response of porous shape memory alloys . 35th European Mask and Lithography Conference (EMLC 2019). 496-508.
-
Lagoudas, D. C., Li, C., Miller, D. A., & Rong, L.
(2000).
Thermomechanical transformation fatigue of SMA actuators . 35th European Mask and Lithography Conference (EMLC 2019). 420-429.
-
Webb, G. V., Lagoudas, D. C., & Kulkarni, M
(1999).
Adaptive shape control for an SMA-actuated aerofoil rib structure. ASME -Publications- Ad.
205-212.
-
Lagoudas, D. C., & Qidwai, M. A
(1999).
Constitutive modeling of 3-D stress induced phase transformation in polycrystalline NiTi SMA. ASME -Publications- Ad.
111-118.
-
Rediniotis, O. K., Lagoudas, D. C., Garner, L. J., & Wilson, L. N.
(1999).
Development of a spined underwater biomimetic vehicle with SMA actuators . 35th European Mask and Lithography Conference (EMLC 2019). 642-653.
-
Lagoudas, D. C., & Miller, D. A.
(1999).
Experiments of thermomechanical fatigue of SMAs . 35th European Mask and Lithography Conference (EMLC 2019). 275-282.
-
Webb, G. V., Wilson, L. N., Lagoudas, D. C., & Rediniotis, O. K.
(1999).
Control of SMA actuators in dynamic environments. 35th European Mask and Lithography Conference (EMLC 2019).
278-289.
-
Griffin, R., Lagoudas, D., Ragupathi, P., Miller, D., & Johnson, E
(1998).
Class thermal conductivity experiment for sophomore materials science and continuum mechanics courses. 2001 Annual Conference Proceedings.
-
Bo, Z., Lagoudas, D. C., & Miller, D. A.
(1998).
Behavior of SMA actuators under nonproportional thermomechanical loading . 35th European Mask and Lithography Conference (EMLC 2019). 312-321.
-
Rediniotis, O. K., Lagoudas, D. C., Garner, L. J., & Wilson, N.
(1998).
Experiments and analysis of an active hydrofoil with SMA actuators
-
Bo, Z. H., & Lagoudas, D. C
(1998).
Modeling of cyclic thermomechanical response of polycrystalline shape memory alloys. 109-122.
-
Griffin, R. B., Everett, L., Lagoudas, D., & INNOVATIONS, E. P
(1997).
Development of a sophomore year engineering program at Texas A&M University. 2010 IEEE FRONTIERS IN EDUCATION CONFERENCE (FIE).
1456-1456.
-
Bhattacharyya, A., & Lagoudas, D. C
(1997).
Thermoelectric Shape Memory Alloy Actuators and the Issue of Thermomechanical Coupling. JOURNAL DE PHYSIQUE IV.
c5-673-c5-678-678.
-
Bhattacharyya, A., & Lagoudas, D. C
(1997).
A stochastic thermodynamic model for the gradual thermal transformation of SMA polycrystals. Smart Materials and Structures.
235-250.
-
Lagoudas, D. C., & Bhattacharyya, A.
(1997).
Performance analysis of thin-layer extensional thermoelectric SMA actuators . 35th European Mask and Lithography Conference (EMLC 2019). 254-267.
-
Rediniotis, O. K., Lagoudas, D. C., Mashio, T., Garner, L. J., & Qidwai, M. A.
(1997).
Theoretical and experimental investigations of an active hydrofoil with SMA actuators . 35th European Mask and Lithography Conference (EMLC 2019). 277-289.
-
Jonnalagadda, K. D., Sottos, N. R., Qidwai, M. A., & Lagoudas, D. C.
(1997).
Transformation of embedded shape memory alloy ribbons . 35th European Mask and Lithography Conference (EMLC 2019). 242-253.
-
Sottos, N. R., Kline, G. E., Qidwai, M. A., & Lagoudas, D. C.
(1996).
Analysis of phase transformation fronts in SMA composites . 35th European Mask and Lithography Conference (EMLC 2019). 427-438.
-
Lagoudas, D. C., Bo, Z., & Bhattacharyya, A.
(1996).
Thermodynamic constitutive model for gradual phase transformation of SMA materials . 35th European Mask and Lithography Conference (EMLC 2019). 482-493.
-
Lagoudas, D. C., Xu, S., Miller, D., & Allen, D. H.
(1996).
Damage in oxidized titanium metal matrix composites. ASME -Publications- Ad.
225-231.
-
Lagoudas, D. C., Xu, S., Miller, D., & Allen, D. H.
(1996).
Damage in oxidized titanium metal matrix composites. 251.
-
Bo, Z., & Lagoudas, D. C
(1996).
Phase transformation localization in SMA wires. 263-274.
-
Bhattacharyya, A., & Lagoudas, D. C
(1995).
Mean-field framework for the characterization of SMA polycrystals with material uncertainties. 143-158.
-
Bhattacharyya, A., Lagoudas, D. C., Wang, Y., & Kinra, V. K.
(1995).
Thermoelectric cooling of shape memory alloy actuators: theoretical modeling and experiment . 35th European Mask and Lithography Conference (EMLC 2019). 198-217.
-
Bo, Z., Kurdila, A. J., Lagoudas, D. C., & Webb, G. V.
(1995).
Identification for a class of nonlinear models for shape memory alloy (SMA) embedded elastomeric rods . 35th European Mask and Lithography Conference (EMLC 2019). 93-106.
-
deBlonk, B. J., Kurdila, A. J., Lagoudas, D. C., & Webb, G. V.
(1995).
Identification of the transient response of SMA embedded flexible rods . 35th European Mask and Lithography Conference (EMLC 2019). 349-359.
-
Xu, G. H., Lagoudas, D. C., Wen, J. T., & Hughes, D. C.
(1995).
Thermo-electro-mechanical modeling and structural response of a flexible beam with external SMA actuators . 35th European Mask and Lithography Conference (EMLC 2019). 503-515.
-
Bo, Z., & Lagoudas, D. C.
(1995).
Thermodynamic constitutive model for cyclic loading of shape memory alloy materials with application to two-way training . 35th European Mask and Lithography Conference (EMLC 2019). 118-130.
-
Bo, Z., & Lagoudas, D. C.
(1995).
Unified thermodynamic constitutive model and finite element analysis of active metal matrix composites . 35th European Mask and Lithography Conference (EMLC 2019). 276-288.
-
Xu, S., Lagoudas, D. C., & Allen, D. H.
(1995).
Effects of oxidation and damage on the mechanical response of metal matrix composites. 201-214.
-
Lagoudas, D. C., Ma, X., Miller, D. A., & Allen, D. H.
(1995).
Modeling of oxidation in metal matrix composites. International Journal of Engineering Science.
2327-2343.
-
Lagoudas, D. C., & Ding, Z.
(1995).
Modeling of thermoelectric heat transfer in shape memory alloy actuators: Transient and multiple cycle solutions. International Journal of Engineering Science.
2345-2364.
-
Bo, Z., Kurdila, A. J., Lagoudas, D. C., & Webb, G
(1995).
Identification for a class of nonlinear models for shape memory alloy (SMA) embedded elastomeric rods. 35th European Mask and Lithography Conference (EMLC 2019).
93-106.
-
Xu, S., Lagoudas, D. C., & Allen, D. H
(1995).
Impact of surface oxidation on damage evolution in metal matrix composites. ASME Applied Mechanics Division -Publications- Amd.
77-102.
-
Bhattacharyya, A., & Lagoudas, D. C
(1995).
Probabilistic influence of material uncertainties on the inelastic response of SMA composites. 237-251.
-
Bo, Z., & Lagoudas, D. C
(1994).
Comparison of different thermomechanical models for shape memory alloys. ASME -Publications- Ad.
9-19.
-
Boyd, J. G., & Lagoudas, D. C.
(1994).
Constitutive model for simultaneous transformation and reorientation in shape memory materials. ASME Applied Mechanics Division -Publications- Amd.
159-172.
-
Boyd, J. G., & Lagoudas, D. C.
(1994).
Thermodynamical study of the two-way shape memory effect in active composites. ASME Applied Mechanics Division -Publications- Amd.
1-12.
-
Bo, Z., & Lagoudas, D. C.
(1994).
Deformations and thermal response of active flexible rods with embedded shape memory alloy actuators . 35th European Mask and Lithography Conference (EMLC 2019). 495-505.
-
Boyd, J. G., & Lagoudas, D. C.
(1994).
Thermodynamical constitutive model for the shape memory effect due to transformation and reorientation . 35th European Mask and Lithography Conference (EMLC 2019). 276-288.
-
Lagoudas, D. C., Bo, Z., & Qidwai, M. A.
(1994).
Micromechanics of active metal matrix composites with shape memory alloy fibers. Studies in Applied Mechanics.
163-190.
-
Lagoudas, D. C., Allen, D. H., & Ma, X.
(1994).
Modeling of surface oxidation and oxidation induced damage in metal matrix composites. ASME -Publications- Ad.
245-264.
-
Jeong, G. S., Allen, D. H., & Lagoudas, D. C
(1993).
Residual stress evolution due to cool down in viscoplastic metal matrix composites. ASME -Publications- Ad.
17-31.
-
Lagoudas, D. C., & Tadjbakhsh, I. G
(1993).
Deformations of active flexible rods with embedded line actuators. ASME Applied Mechanics Division -Publications- Amd.
89-106.
-
Lagoudas, D. C., & Bo, Z
(1993).
Stress induced phase transformations in piezoelectric laminates with shape memory alloy layers. ASME Applied Mechanics Division -Publications- Amd.
107-118.
-
Lagoudas, D. C., & Huang, C. M
(1992).
Damage evolution in the gauge theory with applications to fibrous composites. ASME Applied Mechanics Division -Publications- Amd.
91-102.
-
Lagoudas, D. C
(1992).
On the geometry and kinematics of the gauge theory of defects for media with microstructure. ASME Applied Mechanics Division -Publications- Amd.
81-91.
-
Saleh, A. M., & Lagoudas, D. C
(1991).
Modeling of compressive failure due to kinking in cross-ply laminates under cylindrical bending. 181-193.
-
Lagoudas, D. C., Tadjbakhsh, I., & Fares, N
(1991).
New approach to microbuckling of fibrous composites. American Society of Mechanical Engineers (Paper).
1-7.
-
Dvorak, G. J., Lagoudas, D. C., & Huang, C. M
(1990).
Fatigue damage of metal matrix composite laminates. Bimodal theory and damage optimization. ASME Applied Mechanics Division -Publications- Amd.
41-54.
-
Lagoudas, D. C
(1990).
Gauge theory of brittle damage. ASME Applied Mechanics Division -Publications- Amd.
77-85.
-
Hui, C. Y., Lagoudas, D. C., & Ruina, A
(1987).
CONSTITUTIVE MODELS FOR CRAZES AND THEIR EFFECTS ON CRACK GROWTH IN GLASSY POLYMERS. ASME Applied Mechanics Division -Publications- Amd.
87-115.
-
Foulk, J. W., Allen, D. H., & Lagoudas, D. C
A micromechanical model for predicting fatigue response of metal matrix composites subjected to environmental degradation. 17-31.
-
Seidel, G. D., Bisrat, Y., Lagoudas, D. C., & ASME.
Electrical and thermal conductivities of carbon nanotube-epoxy composites: Modeling and characterization. 245-253.
-
Peraza Hernandez, E. A., Hartl, D. J., & Lagoudas, D. C.
(2016).
Design of Origami Structures With Smooth Folds. ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1.
v002t03a018-v002t03a018.
editor of
-
chapter
-
Qidwai, M., Lagoudas, D., & Hartl, D. J.
(2008).
Numerical Implementation of an SMA Thermomechan-ical Constitutive Model Using Return Mapping Algorithms,
Springer.
193-236.
-
Hartl, D. J., & Lagoudas, D.
(2008).
Thermomechanical Characterization of Shape Memory Alloys
Springer.
55-124.
-
Qidwai, M., Lagoudas, D., & Hartl, D. J.
(2008).
Numerical Implementation of an SMA Thermomechan-ical Constitutive Model Using Return Mapping Algorithms,
Springer.
193-236.
Research
principal investigator on
- Vibration Monitoring and Suppression in Oil and Gas Piping Systems using a Novel Concept combining Shape Memory Alloy and Metamaterial inspired Structures awarded by Qatar Foundation - (Doha, Qatar) 2018 - 2021
- Student Support for 4th International Summer School on Advanced Material Systems (AMS); Thessaloniki, Greece; July 1-7, 2018 awarded by Directorate for Engineering - (Arlington, Virginia, United States) 2018
- Fluid-Structure Interaction of Elastic Shells for Aerospace and Biomedical Applications awarded by Qatar National Research Fund - (Doha, Qatar) 2015 - 2018
- Student Support: 52nd Annual Technical Meeting of the Society of Engineering Science (SES); College Station, Texas awarded by National Science Foundation - (Arlington, Virginia, United States) 2015 - 2016
co-principal investigator on
Teaching
teaching activities
- AERO491 Hnr-research Instructor
- AERO491 Hnr-research Instructor
- AERO617 Micromechanics Instructor
- AERO685 Directed Studies Instructor
- AERO691 Research Instructor
- ENGR485 Directed Studies Instructor
- ENGR491 Hnr-research Instructor
- MEMA625 Micrmechanics Instructor
- MSEN685 Directed Studies Instructor
- MSEN691 Research Instructor
Works By Students
chaired theses and dissertations
-
Agboola, Babatunde Omogbolahan (2015-08). Development and Implementation of Configurational Forces based Constitutive Phase Field Models for Shape Memory Alloys.
-
Awasthi, Amnaya P. (2009-12). An Atomistic Study of the Mechanical Behavior of Carbon Nanotubes and Nanocomposite Interfaces.
-
Ayewah, Daniel Osagie, Oyinkuro (2007-08). Characterization of surfactant dispersed single wall nanotube - polystyrene matrix nanocomposite.
-
Bertacchini, Olivier Walter (2009-12). Characterization and Modeling of Transformation Induced Fatigue of Shape Memory Alloy Actuators.
-
Calhoun, Christopher (2012-05). Actuation Fatigue of Shape Memory Alloys.
-
Cornell, Stephen (2015-05). Experimental Characterization of Shape Memory Alloys using Digital Image Correlation and Infra-Red Thermography.
-
Cox, Austin Edward (2015-08). Finite Element Based Micromechanical Analysis of Precipitated NiTi Shape Memory Alloys.
-
Gardea, Frank (2011-05). Electrical and Thermal Experimental Characterization and Modeling of Carbon Nanotube/Epoxy Composites.
-
Gardea, Frank (2015-08). Damping in Carbon Nanotube Nanocomposites by Interfacial Slippage and Thermally Augmented Polymer Relaxation.
-
Haldar, Krishnendu 1978- (2012-12). Magneto-Thermo-Mechanical Coupling, Stability Analysis and Phenomenological Constitutive Modeling of Magnetic Shape Memory Alloys.
-
Hartl, Darren J. (2009-12). Modeling of Shape Memory Alloys Considering Rate-independent and Rate-dependent Irrecoverable Strains.
-
Kiefer, Bjoern (2006-12). A phenomenological constitutive model for magnetic shape memory alloys.
-
Kumar, Parikshith K. (2009-12). Influence of Inelastic Phenomena on the Actuation Characteristics of High Temperature Shape Memory Alloys.
-
Lester, Brian T (2015-08). Modeling of Shape Memory Alloy MAX Phase Composites Considering the Interaction of Multiple Inelastic Mechanisms.
-
Li, Junjia (2011-05). Synthesis and Electric Field-Manipulation of High Aspect Ratio Barium Titanate.
-
Machado, Luciano G (2007-12). Shape memory alloy for vibration isolation and damping.
-
Oehler, Stephen Daniel (2012-08). Developing Methods For Designing Shape Memory Alloy Actuated Morphing Aerostructures.
-
Oh, Bong T. (2009-05). ANALYSIS AND OPTIMIZATION USING NUMERICAL AND EXPERIMENTAL EVALUATION METHODS FOR MULTIDISCIPLINARY DESIGN PROBLEMS.
-
Pachalla Seshadri, Rajagopal (2004-08). Analysis of oscillating flow cooled SMA actuator.
-
Parrinello, Antonino (2013-08). Effect of Phase Transformation on the Fracture Behavior of Shape Memory Alloys.
-
Peraza Hernandez, Edwin Alexander (2016-12). Kinematics, Structural Mechanics, and Design of Origami Structures with Smooth Folds.
-
Phillips, Francis Randall (2010-08). Fabrication and Characterization of Nanowires.
-
Sager, Ryan James (2008-05). A characterization of the interfacial and interlaminar properties of carbon nanotube modified carbon fiber/epoxy composites.
-
Schick, Justin Ryan (2009-12). Transformation Induced Fatigue of Ni-Rich NiTi Shape Memory Alloy Actuators.
-
Seidel, Gary Don (2007-08). Micromechanics modeling of the multifunctional nature of carbon nanotube-polymer nanocomposites.
-
Tabesh, Majid (2015-08). A Gradient-based Constitutive Model to Predict Size Effects in the Response of Shape Memory Alloys.
-
Thakre, Piyush R. (2009-12). Processing and Characterization of Carbon Nanotubes Reinforced Epoxy Resin Based Multi-scale Multi-functional Composites.
-
Volk, Brent L. (2009-05). Thermomechanical Characterization and Modeling of Shape Memory Polymers.
-
Volk, Brent Louis 1985- (2012-12). Three-Dimensional Modeling of Shape Memory Polymers Considering Finite Deformations and Heat Transfer.
Background
education and training
- Ph.D. in Applied Mathematics, Lehigh University - (Bethlehem, Pennsylvania, United States) 1986
- Dip.Ed. Diploma of Education in Mechanical Engineering, Aristotle University of Thessaloniki - (Thessaloniki, Kentriki Makedonia, Greece) 1982
- Cornell University - (Ithaca, New York, United States) , Postdoctoral Training 1988
awards and honors
- AIAA Fellow, conferred by American Institute of Aeronautics and Astronautics - (Reston, Virginia, United States), 2014
- SES Fellow, conferred by Society of Engineering Science, 2009
- Adaptive Structures and Material Systems Prize, conferred by American Society of Mechanical Engineers - (New York, New York, United States), 2006
- NASA Faculty Fellowship, conferred by National Aeronautics and Space Administration - (Washington D.C., District of Columbia, United States), 2004
- Associate Fellow, conferred by American Institute of Aeronautics and Astronautics - (Reston, Virginia, United States), 2000
- Fellow, conferred by American Society of Mechanical Engineers - (New York, New York, United States), 2000
- Neely '52 Dow Chemical Faculty Fellow, conferred by Texas A&M University - (College Station, Texas, United States), 1998
Contact
first name
- Dimitris
has last name
- Lagoudas
mailing address
-
Texas A&M Engineering Experiment Station
Vice Chancellor Engineering - Banks
3126 TAMUS
College Station, TX 77843-3141
USA
Other
- lagoudas@tamu.edu