Childs, Dara
Professor
Positions
-
- Overview
-
- Publications
-
- Teaching
-
- Works By Students
-
- Background
-
- Contact
-
- Other
-
- View All
-
Overview
Publications
Teaching
Works By Students
chaired theses and dissertations
-
Aboel Hassan Muhammed, Ameen (2013-02). Rotordynamics of Twin-Screw Pumps.
-
Agnew, Jeffrey Scott (2012-02). Rotordynamic Performance of a Flexure Pivot Pad Bearing with Active and Locked Integral Squeeze Film Damper Including Predictions.
-
Al Jughaiman, Bader K. (2006-08). Static and dynamic characteristics for a two-axial-groove bearing and a pressure-dam bearing.
-
Arthur, Stephen Patrick (2015-12). Measured Rotordynamic Coefficients and Leakage for a Tooth-on-Rotor Labyrinth Seal with Comparisons to a Tooth-on-Stator Labyrinth Seal.
-
Avendano Ovalle, Raul David (2011-10). An Analysis of the Impact of Flexible Coupling Misalignment on Rotordynamics.
-
Balke, Nathan Edward (2017-12). Analyzing the Influence of a Swirl Brake on a Smooth Liquid Annular Seal Through Measuring Static and Rotordynamic Characteristics.
-
Brown, Philip David (2012-10). Measurement Versus Predictions of Rotordynamic Coefficients and Leakage Rates for a Hole-Pattern Gas Seal with Negative Preswirl.
-
Bullock, Joshua Thomas (2019-03). The Effects of Imposed Pre-Swirl on the Static and Rotordynamic Performance for Smooth Annular Liquid Seals.
-
Carter, Clint Ryan (2007-08). Measured and predicted rotordynamic coefficients and static performance of a rocker-pivot, tilt pad bearing in load-on-pad and load-between-pad configurations.
-
Coghlan, David (2014-08). Static, Rotordynamic, and Thermal Characteristics of a Four Pad Spherical-Seat Tilting Pad Journal Bearing with Four Methods of Directed Lubrication.
-
Deva Asirvatham, Thanesh (2010-12). Friction Factor Measurement, Analysis, and Modeling for Flat-Plates with 12.15 mm Diameter Hole-Pattern, Tested with Air at Different Clearances, Inlet Pressures, and Pressure Ratios.
-
Eitrheim, Nathan David (2017-10). Measured Static and Rotordynamic Characteristics of a Circumferentially-grooved-stator/smooth-rotor Liquid Annular Seal: Influence of Viscosity, Eccentricity, Pressure, and Speed.
-
Elrod, David Alan (1988-11). Entrance and exit region friction factor models for annular seal analysis.
-
Esser, Paul R. (2010-05). Measurements versus Predictions for a Hybrid (Hydrostatic plus Hydrodynamic Thrust Bearing for a Range of Orifice Diameters.
-
Gaines, Jennifer Elizabeth (2014-12). Examining the Impact of Pad Flexibility on the Rotordynamic Coefficients of Rocker-Pivot-Pad Tilting-Pad Journal Bearings.
-
Gary, Keith William (2017-10). Measurements of the Leakage and Rotordynamic Performance of Interlocking Labyrinth Seals.
-
James, Stephen M. (2010-05). Adapting a Beam-Based Rotordynamics Model to Accept a General Three-Dimensional Finite-Element Casing Model.
-
Kerr, Thomas Chandler (2017-10). Static and Dynamic Coefficient Measurements for a Thrust Collar Used in an Integrally Geared Compressor.
-
Khatri, Rasish (2014-08). An Experimental Investigation of the Static and Dynamic Performance of Horizontal-Application and Vertical-Application Three-Lobe Bearings.
-
Kheireddin, Bassem A. (2009-08). Investigation Of The Friction Factor Behavior for Flat Plate Tests Of Smooth And Roughened Surfaces With Supply Pressures Up To 84 Bars.
-
Klooster, David (2009-12). Transient Lift-off Test Results for an Experimental Hybrid Bearing in Air.
-
Kluitenberg, Matthew P (2015-04). Experimentally Determine the Impact of Jacking-Oil Pockets on the Rotordynamic Characteristics of a Four-Pad, LBP, Tilting-Pad Journal Bearing.
-
Kulhanek, Chris David (2012-02). Dynamic and Static Characteristics of a Rocker-Pivot, Tilting-Pad Bearing with 50% and 60% Offsets..
-
Kumar, Dhruv Dileep (2011-10). Backward Precessional Whip and Whirl for a Two Point Rubbing Contact Model of a Rigid Rotor Supported by an Elastically Supported Rigid Stator.
-
Mehta, Naitik (2012-07). Comparison of a Slanted-Tooth See-Through Labyrinth Seal to a Straight-Tooth See-Through Labyrinth Seal for Rotordynamic Coefficients and Leakage.
-
Moreland, James Alexander (2016-05). Influence of Pre-Swirl and Eccentricity in Smooth Stator/Grooved Rotor Liquid Annular Seals, Measured Static and Rotordynamic Characteristics.
-
Najeeb, Ovais Ahmed Bin (2017-11). Static and Rotordynamic Analysis of a Plain Annular (Liquid) Seal in the Laminar Regime with a Swirl Brake for Three Clearances.
-
Norrbin, Clay Sven (2016-12). Housing Shape's Impact on Electric Submersible Pump's Equilibrium Position and Rotordynamics.
-
Ramirez Alanis, Mauricio Alan (2017-12). Development and Validation of Test Rig for Measurements of Leakage and Rotordynamic Performance of Interlocking Gas Labyrinth Seals.
-
Rodrigues Rodrigues, Margarita (2006-12). Improving performance and rotordynamic characteristics of injection compressors via much longer balance-piston and division-wall seals.
-
Saha, Rohit (2012-02). A New, Iterative, Synchronous-Response Algorithm for Analyzing the Morton Effect.
-
Salas III, Jesus (2016-05). Influence of Pressure-Dams in Liquid Annular Seals in the Laminar Flow Regime, Measured Results for Static and Rotordynamic Characteristics.
-
Shrestha, Hari Krishna (2018-03). Experimental Study of the Static and Dynamic Characteristics of a Long (L/D=0.75) Labyrinth Annular Seal Operating Under Two-Phase (Liquid/Gas) Conditions.
-
Thorat, Manish R. (2010-05). Impact of Rotor Surface Velocity, Leakage Models and Real Gas Properties on Rotordynamic Force Predictions of Gas Labyrinth Seals.
-
Torres, Jose Maria (2016-12). Static and Rotordynamic Characteristics of Liquid Annular Seals with a Circumferentially-Grooved Stator and Smooth Rotor using Three Levels of Circumferential Inlet-Fluid Rotation.
-
Tschoepe, David 1987- (2012-08). Measurements Versus Predictions for the Static and Dynamic Characteristics of a Four-pad Rocker-pivot, Tilting-pad Journal Bearing.
-
Vannarsdall, Michael Lloyd (2012-10). Measured Results for a New Hole-Pattern Annular Gas Seal Incorporating Larger Diameter Holes, Comparisons to Results for a Traditional Hole-Pattern Seal and Predictions.
-
Wilkes, Jason C. (2008-08). A PERSPECTIVE ON THE NUMERICAL AND EXPERIMENTAL CHARACTERISTICS OF MULTI-MODE DRY-FRICTION WHIP AND WHIRL.
-
Wilkes, Jason Christopher (2012-02). Measured and Predicted Rotor-Pad Transfer Functions for a Rocker-Pivot Tilting-Pad Journal Bearing.
-
Zhang, Min (2017-12). Experimental Study of the Static and Dynamic Characteristics of a Long (L/D=0.65) Smooth Annular Seal Operating Under Two-Phase (Liquid/Gas) Conditions.
-
Zutavern, Zachary Scott (2006-08). Identification of rotordynamic forces in a flexible rotor system using magnetic bearings.
Background
Other