HR job title
- Professor
- Contact Info
- 7132421318
Parsaei, Hamid Professor
Positions
Dr. Parsaei previously served as the Associate Dean for Academic Affairs at Texas A&M University at Qatar as well as professor and chair of the Department of Industrial Engineering at the University of Houston for over nine years. Within the Institute of Industrial and Systems Engineers (IISE), he was the director of the Engineering Economy Divisions of IISE and ASEE and the IISE senior vice president-at-large (international), and a member of the board of trustees. He is a fellow of the Institute of Industrial and Systems Engineers (IISE), American Society for Engineering Education (ASEE), Society of Manufacturing Engineers (SME), and Industrial Engineering and Operations Management Society International (IEOM). He currently serves as the President of the IEOM (2021-2023). He has acted as principal or co-principal investigator on projects sponsored by the National Science Foundation, U.S. Department of Homeland Security, US Department of Defense, Qatar National Research Fund, and Texas Department of Transportation, among many others.
- Overview
- Publications
- Research
- Teaching
- Background
- Contact
- Other
- View All
Overview
Publications
selected publications
-
academic article
-
Davahli, M. R., Karwowski, W., Fiok, K., Wan, T., & Parsaei, H. R.
(2021).
Controlling Safety of Artificial Intelligence-Based Systems in Healthcare. Symmetry.
13(1), 102-102.
-
Lim, G. J., Cho, J., Bora, S., Biobaku, T., & Parsaei, H.
(2018).
Models and computational algorithms for maritime risk analysis: a review. Annals of Operations Research.
271(2), 765-786.
-
Taylan, O., Rizwan, A., & Parsaei, H.
(2017).
Optimization of engineering student learning and assessment by cognitive methods. Engineering Education Letters.
2017(1),
-
Wang, N., Chen, X., Lan, Q., Song, G., Parsaei, H. R., & Ho, S.
(2017).
A Novel Wiki-Based Remote Laboratory Platform for Engineering Education. IEEE Transactions on Learning Technologies.
10(3), 331-341.
-
Wang, N., Chen, X., Song, G., Lan, Q., & Parsaei, H. R.
(2017).
Design of a New Mobile-Optimized Remote Laboratory Application Architecture for M-Learning. IEEE Transactions on Industrial Electronics.
64(3), 2382-2391.
-
Wang, N., Zhu, J., Lan, Q., Chen, X., Song, G., & Parsaei, H.
(2017).
Integration of a remote PID motor speed control experiment with teaching in engineering education. Engineering Education Letters.
2017(1),
-
Biobaku, T., Lim, G. J., Bora, S., Cho, J., & Parsaei, H.
(2016).
An optimal sonar placement approach for detecting underwater threats under budget limitations. Journal of Transportation Security.
9(1-2), 17-34.
-
Parsaei, H. R.
(2016).
In memory of Dr. G. T. Stevens, Jr., professor and chair emeritus, University of Texas Arlington. The Engineering Economist.
61(2), 155-155.
-
Biobaku, T., Lim, G. J., Cho, J., Bora, S., & Parsaei, H.
(2015).
Literature Survey on Underwater Threat Detection. Transactions on Maritime Science.
4(1), 14-22.
-
Wang, N., Chen, X., Song, G., & Parsaei, H.
(2015).
A Novel Real-time Video Transmission Approach for Remote Laboratory Development. International Journal of Online Engineering.
11(1), 4-9.
-
Biobaku, T., Lim, G., Cho, J., Parsaei, H., & Kim, S.
(2015).
Liquefied natural gas ship route planning: A risk analysis approach. Procedia Manufacturing.
3, 1319-1326.
-
Cho, J., Lim, G., Biobaku, T., Kim, S., & Parsaei, H.
(2015).
Safety and security management with Unmanned Aerial Vehicle (UAV) in oil and gas industry. Procedia Manufacturing.
3, 1343-1349.
-
Wang, N., Chen, X., Song, G., & Parsaei, H.
(2015).
An Experiment Scheduler and Federated Authentication Solution for Remote Laboratory Access. International Journal of Online Engineering.
11(3), 20-26.
-
Wang, N., Chen, X., Song, G., & Parsaei, H.
(2015).
An Experiment Scheduler and Federated Authentication Solution for Remote Laboratory Access. 11(3), 20-20.
-
Wang, N., Chen, X., Song, G., & Parsaei, H.
(2015).
Using Node-HTTP-Proxy for Remote Experiment Data Transmission Traversing Firewall. International Journal of Online Engineering.
11(2), 60-67.
-
Cho, J., Lim, G. J., Biobaku, T., Bora, S., & Parsaei, H.
(2014).
Liquefied Natural Gas Ship Route Planning Model Considering Market Trend Change. Transactions on Maritime Science.
3(2), 119-130.
-
Parsaei, H., & Elbashir, N.
(2014).
A New Voice in Engineering Education: Engineering Education Letters. Engineering Education Letters.
2015(1),
-
Elbashir, N., & Parsaei, H. R.
(2014).
Development of a New Engineering Education in the Middle East. Engineering Education Letters.
2015(1),
-
Wang, N., Weng, J., Chen, X., Song, G., & Parsaei, H.
(2014).
Development of a remote shape memory alloy experiment for engineering education. Engineering Education Letters.
2015(1),
-
Garbie, I. H., Parsaei, H. R., & Leep, H. R.
(2008).
A novel approach for measuring agility in manufacturing firms. International Journal of Computer Applications in Technology.
32(2), 95-95.
-
Garbie, I. H., Parsaei, H. R., & Leep, H. R.
(2008).
Measurement of needed reconfiguration level for manufacturing firms. International Journal of Agile Systems and Management.
3(1-2), 78-92.
-
Garbie, I. H., Parsaei, H. R., & Leep, H. R.
(2008).
Measurement of needed reconfiguration level for manufacturing firms. International Journal of Agile Systems and Management.
3(1/2), 78-78.
-
Garbie, I. H., Parsaei, H. R., & Leepi, H. R.
(2005).
Introducing new parts into existing cellular manufacturing systems based on a novel similarity coefficient. International Journal of Production Research.
43(5), 1007-1037.
-
Desai, A. A., Yang, Y., & Parsaei, H. R.
(2003).
EFFECT OF ACTIVITY SCHEDULINGS AND INVENTORY CONTROL: AN EXPERIMENTAL INVESTIGATION FOR PC ASSEMBLY. Journal of the Chinese Institute of Industrial Engineers.
20(3), 282-294.
-
Yang, Y. N., Parsaei, H. R., & Leep, H. R.
(2001).
A prototype of a feature-based multiple-alternative process planning system with scheduling verification. Computers and Industrial Engineering.
39(1-2), 109-124.
-
Yang, Y. N., Parsaei, H. R., Leep, H. R., & Chuengsatiansup, K.
(2000).
Evaluating ROBOTIC safety using quality function deployment. International Journal of Manufacturing Technology and Management.
1(2-3), 241-256.
-
Yang, Y. N., Parsaei, H. R., Leep, H. R., & Wong, J. P.
(1998).
Manufacturing cost-estimating system using activity-based costing. International Journal of Flexible Automation and Integrated Manufacturing.
6(3), 223-243.
-
Jeon, G., Broering, M., Leep, H. R., Parsaei, H. R., & Wong, J. P.
(1998).
Part family formation based on a new similarity coefficient which considers alternative routes during machine failure. Computers and Industrial Engineering.
35(3-4), 479-482.
-
Jeon, G., Broering, M., Leep, H. R., Parsaei, H. R., & Wong, J. P.
(1998).
Part family formation based on alternative routes during machine failure. 35(1-2), 73-76.
-
Jeon, G., Leep, H. R., & Parsaei, H. R.
(1998).
Cellular manufacturing system based on new similarity coefficient which considers alternative routes during machine failure. Computers and Industrial Engineering.
34(1), 21-36.
-
Kamrani, A. K., Hubbard, K., Parsaei, H. R., & Leep, H. R.
(1998).
Simulation-based methodology for machine cell design. Computers and Industrial Engineering.
34(1), 173-188.
-
Parsaei, H. R., & Leep, H. R.
(1997).
Guest Editorial. Intelligent Automation and Soft Computing.
3(3), 189-190.
-
Dong, J., Parsaei, H. R., & Leep, H. R.
(1997).
Integrated Feature-Based Process Planning and Scheduling with an Object-Oriented Knowledge-Based Approach. Intelligent Automation and Soft Computing.
3(3), 249-260.
-
Nasser, B., ElGayar, F. A., Zahran, I. M., Parsaei, H. R., & Leep, H. R.
(1996).
A prototype solid-modeling-based automated process planning system. Computers and Industrial Engineering.
31(1-2), 169-172.
-
Dong, J. J., Parsaei, H. R., & Leep, H. R.
(1996).
Manufacturing process planning in a concurrent design and manufacturing environment. Computers and Industrial Engineering.
30(1), 83-93.
-
Nyaluke, A., Nasser, B., Leep, H. R., & Parsaei, H. R.
(1996).
Rapid prototyping work space optimization. Computers and Industrial Engineering.
31(1-2), 103-106.
-
AN, D., PARSAEI, H. R., LEEP, H. R., & NYALUKE, A. P.
(1995).
AN ACTIVITY LAYER FOR AN INTELLIGENT AUTOMATIC PRODUCT DESIGN ENVIRONMENT. Computers and Industrial Engineering.
29(1-4), 717-721.
-
NYALUKE, A. P., AN, D. K., LEEP, H. R., & PARSAEI, H. R.
(1995).
RAPID PROTOTYPING - APPLICATIONS IN ACADEMIC-INSTITUTIONS AND INDUSTRY. Computers and Industrial Engineering.
29(1-4), 345-349.
-
KUMAR, A., PATHAK, R. M., GUPTA, Y. P., & PARSAEI, H. R.
(1995).
A GENETIC ALGORITHM FOR DISTRIBUTED SYSTEM TOPOLOGY DESIGN. Computers and Industrial Engineering.
28(3), 659-670.
-
Parsaei, H. R., Wang, B., & Wysk, R. A.
(1995).
Editorial. Computers and Industrial Engineering.
28(3), 495.
-
AN, D., LEEP, H. R., PARSAEI, H. R., & NYALUKE, A. P.
(1995).
A PRODUCT DATA EXCHANGE INTEGRATION STRUCTURE USING PDES/STEP FOR AUTOMATED MANUFACTURING APPLICATIONS. Computers and Industrial Engineering.
29(1-4), 711-715.
-
Kamrani, A. K., Parsaei, H. R., & Leep, H. R.
(1995).
A simulation approach for cellular manufacturing system design and analysis. Manufacturing Research and Technology.
24(C), 351-381.
-
AGARWAL, M., KAMRANI, A. K., & PARSAEI, H. R.
(1994).
AN AUTOMATED CODING AND CLASSIFICATION-SYSTEM WITH SUPPORTING DATABASE FOR EFFECTIVE DESIGN OF MANUFACTURING SYSTEMS. Journal of Intelligent Manufacturing.
5(4), 235-249.
-
KAMRANI, A. K., & PARSAEI, H. R.
(1994).
A METHODOLOGY FOR THE DESIGN OF MANUFACTURING SYSTEMS USING GROUP TECHNOLOGY. Production Planning and Control.
5(5), 450-464.
-
DONG, J., & PARSAEI, H. R.
(1994).
DESIGN AND IMPLEMENTATION OF A FEATURE-BASED AUTOMATED PROCESS PLANNING (FBAPP) SYSTEM. Computers and Industrial Engineering.
27(1-4), 1-4.
-
KAMRANI, A. K., PARSAEI, H. R., & CHAUDHRY, M. A.
(1993).
A SURVEY OF DESIGN METHODS FOR MANUFACTURING CELLS. Computers and Industrial Engineering.
25(1-4), 487-490.
-
KAMRANI, A. K., & PARSAEI, H. R.
(1993).
PERFORMANCE ANALYSIS OF THE CELLULAR MANUFACTURING SYSTEMS A DECISION-SUPPORT TOOL. Computers and Industrial Engineering.
25(1-4), 499-502.
-
DAUGHERTY, L. C., PARSAEI, H. R., & KOLLI, S. S.
(1993).
STRATEGIC JUSTIFICATION OF ADVANCED AUTOMATED TECHNOLOGY SYSTEMS USING AN EXPERT-SYSTEM. Computers and Industrial Engineering.
25(1-4), 107-110.
-
KAMRANI, A. K., & PARSAEI, H. R.
(1993).
A GROUP TECHNOLOGY-BASED METHODOLOGY FOR MACHINE CELL-FORMATION IN A COMPUTER-INTEGRATED MANUFACTURING ENVIRONMENT. Computers and Industrial Engineering.
24(3), 431-447.
-
PARSAEI, H. R., WILHELM, M. R., & KOLLI, S. S.
(1993).
APPLICATION OF OUTRANKING METHODS TO ECONOMIC AND FINANCIAL JUSTIFICATION OF CIM SYSTEMS. Computers and Industrial Engineering.
25(1-4), 357-360.
-
DONG, J. J., PARSAEI, H. R., & GORNET, T.
(1993).
MANUFACTURING FEATURES EXTRACTION AND RECOGNITION IN AUTOMATED PROCESS PLANNING. Computers and Industrial Engineering.
25(1-4), 325-328.
-
DONG, J., JO, H. H., & PARSAEI, H. R.
(1992).
A FEATURE-BASED DYNAMIC PROCESS PLANNING AND SCHEDULING. Computers and Industrial Engineering.
23(1-4), 141-144.
-
KAMRANI, A. K., & PARSAEI, H. R.
(1992).
A METHODOLOGY FOR FORMING MANUFACTURING CELLS USING MANUFACTURING AND DESIGN ATTRIBUTES. Computers and Industrial Engineering.
23(1-4), 73-76.
-
DONG, J., JO, H. H., & PARSAEI, H. R.
(1992).
AN OBJECT-ORIENTED WINDOW SCHEME FOR REPRESENTING DESIGN AND MANUFACTURING ACTIVITIES. Computers and Industrial Engineering.
23(1-4), 19-22.
-
JO, H. H., DONG, J., & PARSAEI, H. R.
(1992).
DESIGN FRAMEWORKS FOR CONCURRENT ENGINEERING. Computers and Industrial Engineering.
23(1-4), 11-14.
-
KOLLI, S., & PARSAEI, H. R.
(1992).
MULTICRITERIA ANALYSIS IN THE EVALUATION OF ADVANCED MANUFACTURING TECHNOLOGY USING PROMETHEE. Computers and Industrial Engineering.
23(1-4), 455-458.
-
Kolli, S., Wilhelm, M. R., Parsaei, H. R., & Liles, D. H.
(1992).
A Classification Scheme for Traditional and Non-Traditional Approaches to the Economic Justification of Advanced Automated Manufacturing Systems. Manufacturing Research and Technology.
14(C), 165-187.
-
WILHELM, M. R., & PARSAEI, H. R.
(1991).
A FUZZY LINGUISTIC APPROACH TO IMPLEMENTING A STRATEGY FOR COMPUTER INTEGRATED MANUFACTURING. Fuzzy Sets and Systems.
42(2), 191-204.
-
WONG, J. P., PARSAEI, H. R., IMAM, I. N., & KAMRANI, A. K.
(1991).
AN INTEGRATED COST ESTIMATING SYSTEM FOR CONCURRENT ENGINEERING ENVIRONMENT. Computers and Industrial Engineering.
21(1-4), 589-594.
-
Tayyari, F., & Parsaei, H. R.
(1991).
Robotic system safety. International Journal of Industrial Ergonomics.
7(2), 175-179.
-
Karwowski, W., Rahimi, M., Parsaei, H., Amarnath, B. R., & Pongpatanasuegsa, N.
(1991).
The effect of simulated accident on worker safety behavior around industrial robots. International Journal of Industrial Ergonomics.
7(3), 229-239.
-
KAMRANI, A. K., KAMRANI, K. K., PARSAEI, H. R., & WONG, J. P.
(1991).
A COMPUTER HIERARCHY STRUCTURE FOR ELECTRIC-POWER UTILITY. Computers and Industrial Engineering.
21(1-4), 507-511.
-
JO, H. H., PARSAEI, H. R., & WONG, J. P.
(1991).
CONCURRENT ENGINEERING - THE MANUFACTURING PHILOSOPHY FOR THE 90S. Computers and Industrial Engineering.
21(1-4), 35-39.
-
SONI, R. G., PARSAEI, H. R., & LILES, D. H.
(1990).
A METHODOLOGY FOR EVALUATION COMPUTER INTEGRATED MANUFACTURING TECHNOLOGIES. Computers and Industrial Engineering.
19(1-4), 210-214.
-
KULKARNI, J., & PARSAEI, H. R.
(1990).
TAILORING SEARCH STRATEGY FOR LITERATURE ON ECONOMIC JUSTIFICATION OF COMPUTER INTEGRATED MANUFACTURING. Computers and Industrial Engineering.
19(1-4), 544-547.
-
PARSAEI, H. R., & WILHELM, M. R.
(1989).
A JUSTIFICATION METHODOLOGY FOR AUTOMATED MANUFACTURING TECHNOLOGIES. Computers and Industrial Engineering.
16(3), 363-373.
-
PARSAEI, H. R., KARWOWSKI, W., WILHELM, M. R., & WALSH, A. J.
(1988).
A METHODOLOGY FOR ECONOMIC JUSTIFICATION OF FLEXIBLE MANUFACTURING SYSTEMS. Computers and Industrial Engineering.
15(1-4), 117-122.
-
STEVENS, G. T., & PARSAEI, H. R.
(1987).
A CAPITAL-INVESTMENT MODEL FOR ELASTIC DEMAND AND NONLINEAR PRODUCTION CAPACITY. Computers and Industrial Engineering.
12(1), 9-21.
-
PARSAEI, H. R., & GALBIATI, L. J.
(1987).
FACILITIES PLANNING AND DESIGN WITH MICROCOMPUTERS. Computers and Industrial Engineering.
13(1-4), 332-335.
-
PARSAEI, H. R., & MORIER, J. S.
(1986).
AN INTERACTIVE PROGRAM ASSISTS LAYOUT PLANNING. Computers and Industrial Engineering.
11(1-4), 83-86.
-
GALBIATI, L. J., & PARSAEI, H. R.
(1986).
PROGRAM ASSISTS ECONOMIC LIFE DETERMINATION. Computers and Industrial Engineering.
11(1-4), 119-123.
-
Davahli, M. R., Karwowski, W., Fiok, K., Wan, T., & Parsaei, H. R.
(2021).
Controlling Safety of Artificial Intelligence-Based Systems in Healthcare. Symmetry.
13(1), 102-102.
-
chapter
-
Chen, X., Lan, Q., Wang, N., Song, G., & Parsaei, H. R.
(2019).
RLaaS-Frame. Global Advances in Engineering Education.
(pp. 139-164).
Taylor & Francis.
-
Ismail, M. Y., Parsaei, H. R., & Kakosimos, K.
(2019).
Augmented reality in engineering instruction. Global Advances in Engineering Education.
(pp. 165-176).
Taylor & Francis.
-
Garbie, I. H., Parsaei, H. R., & Leep, H. R.
(2008).
Designing Cellular Manufacturing for Next Generation Production Systems. Collaborative Engineering.
(pp. 249-281).
Springer Nature.
-
Gad El Mola, K. M., Parsaei, H. R., & Leep, H. R.
(2006).
Economic Analysis of Rapid Prototyping Systems. Rapid Prototyping.
(pp. 293-318).
Springer Nature.
-
Yang, Y., Jeon, G., Leep, H. R., & Parsaei, H. R.
(2000).
A Framework for Part Placement in a Rapid Prototyping Process. Direct Engineering: Toward Intelligent Manufacturing.
(pp. 325-345).
Springer Nature.
-
Yang, Y., Jeon, G., Leep, H. R., & Parsaei, H. R.
(1999).
A Framework for Part Placement in a Rapid Prototyping Process. Direct Engineering: Toward Intelligent Manufacturing.
(pp. 325-345).
Springer Nature.
-
Kamrani, A. K., Parsaei, H. R., & Liles, D. H.
(1995).
Preface. Manufacturing Research and Technology.
Planning, Design, and Analysis of Cellular Manufacturing Systems.
(pp. xv-xvi).
Elsevier.
-
Kamrani, A. K., Parsaei, H. R., & Liles, D. H.
(1995).
Preface. Manufacturing Research and Technology.
Planning, Design, and Analysis of Cellular Manufacturing Systems.
(pp. xv-xvi).
Elsevier.
-
Jo, H. H., Parsaei, H. R., & Sullivan, W. G.
(1993).
Principles of concurrent engineering. Concurrent Engineering.
(pp. 3-23).
Springer Nature.
-
Wong, J. P., Imam, I. N., Khosravi-Kamrani, A., Parsaei, H. R., & Tayyari, F.
(1992).
A Totally Integrated Manufacturing Cost Estimating System (TIMCES). Economics of Advanced Manufacturing Systems.
(pp. 201-224).
Springer Nature.
-
Soni, R. G., Parsaei, H. R., & Liles, D. H.
(1992).
Economic and Financial Justification Methods for Advanced Automated Manufacturing: An Overview. Economics of Advanced Manufacturing Systems.
(pp. 3-19).
Springer Nature.
-
Kulkarni, J., Parsaei, H. R., & Tayyari, F.
(1992).
Information Solutions to Advanced Production and Manufacturing Systems (APMS): A Discipline Impact Factor Analysis. Economics of Advanced Manufacturing Systems.
(pp. 321-329).
Springer Nature.
-
Chen, X., Lan, Q., Wang, N., Song, G., & Parsaei, H. R.
(2019).
RLaaS-Frame. Global Advances in Engineering Education.
(pp. 139-164).
Taylor & Francis.
-
conference paper
-
Retnanto, A., Parsaei, H. R., & Parsaei, B.
(2019).
Capacity Building Through Strengthening Professional Skills in Engineering Graduates. Advances in Intelligent Systems and Computing.
146-150.
-
Vijayaraghavan, V., Kianfar, K., Ding, Y. u., & Parsaei, H.
(2018).
A Mixed Integer Programming Based Recursive Variance Reduction Method for Reliability Evaluation of Linear Sensor Systems. IEEE International Conference on Automation Science and Engineering (CASE) : [proceedings]. IEEE Conference on Automation Science and Engineering.
836-842.
-
Vijayaraghavan, V., Kianfar, K., Ding, Y. u., & Parsaei, H.
(2017).
An L1-Minimization Based Algorithm to Measure the Redundancy of State Estimators in Large Sensor Systems. IEEE International Conference on Automation Science and Engineering (CASE) : [proceedings]. IEEE Conference on Automation Science and Engineering.
424-428.
-
Ismail, M., Parsaei, H., & Kakosimos, K.
(2017).
Incorporating Human Factors in Course Design: Utility of Wearable Technologies. Advances in Intelligent Systems and Computing.
159-170.
-
Ismail, M., Parsaei, H., Guo, B., Kakosimos, K., Dufresne, R., & Alaeddine, N.
(2016).
Advancing Engineering Education through Technology-Driven Teaching Innovations. ASEE Annual Conference and Exposition, Conference Proceedings.
-
Lan, Q., Wang, N., Zhu, J., Chen, X., Song, G., & Parsaei, H.
(2016).
Develop a Collaborative and Cooperative Remote Experiment. 1024-1032.
-
Lan, Q., Wang, N., Chen, X., Song, G., & Parsaei, H.
(2016).
Develop a New Mobile-Optimized Remote Experiment Application for Mobile Learning. ASEE Annual Conference and Exposition, Conference Proceedings.
-
Zhu, J., Wang, N., Lan, Q., Song, G., Chen, X., & Parsaei, H.
(2016).
Develop a Remote PID Motor Control Experiment for Engineering Technology EducationA Case Study. 1016-1023.
-
Parsaei, H., Wang, N., Lan, Q., Chen, X., & Song, G.
(2016).
Develop a Global Scalable Remote Laboratory Based on a Unified Framework
-
Ismail, M. Y., & Parsaei, H. R.
(2016).
Employing Technology to Customize the Flipped Classroom Practice. Proceedings of the International Conference on Industrial Engineering and Operations Management.
1599-1600.
-
Parsaei, H., Creel, B., & Small, J.
(2015).
Building Human Capacity to Meet Demand for Engineers and Scientists in the Middle East and North Africa (other). 26.306.1-26.306.12.
-
Wang, N., Chen, X., Song, G., & Parsaei, H.
(2015).
Develop a Scheduler and Federated Authentication for Remote Laboratory Access. 214-219.
-
Wang, N., Ho, S. C., Lan, Q., Chen, X., Song, G., & Parsaei, H.
(2015).
Developing a Remote Laboratory at TAMUQ Based on a Novel Unified Framework. ASEE Annual Conference and Exposition, Conference Proceedings.
26.487.1-26.487.16.
-
Alaeddine, N., Parsaei, H., Kakosimos, K., Guo, B., & Mansoor, B.
(2015).
Teaching Innovation with Technology to Accelerate Engineering Students Learning. ASEE Annual Conference and Exposition, Conference Proceedings.
26.1478.1-26.1478.15.
-
Bora, S., Boros, E., Lei, L., Chovalitwongse, W. A., Lim, G. J., & Parsaei, H. R.
(2015).
A Vessel Scheduling Problem with Special Cases. Communications in Computer and Information Science.
108-125.
-
Bora, S., Parsaei, H., Cho, J., Biobaku, T., & Lim, G.
(2015).
Case studies on maritime incidents: A review. 2494-2500.
-
Parsaei, H. R., & Elbashir, N.
(2015).
Introduction to the Proceedings of the 2014 Engineering Leaders Conference
-
Parsaei, H. R., & Elbashir, N.
(2014).
A New Vision for Enginering Education. ASEE Annual Conference and Exposition, Conference Proceedings.
24.80.1-24.80.8.
-
Wang, N., Chen, X., Ho, M., Parsaei, H., & Song, G.
(2014).
A Novel Solution For Addressing Network Firewall Issues In Remote Laboratory Development
-
Cho, J., Lim, G., Biobaku, T., Bora, S., & Parsaei, H.
(2014).
A Stochastic Approach To Liquefied Natural Gas (lng) Ship Route Planning Model Under Weather Disruptions
-
Bora, S., Boros, E., Lei, L., Chaovalitwongse, W. A., Lim, G. J., & Parsaei, H. R.
(2014).
A case of the container-vessel scheduling problem. 63-71.
-
Bora, S., Lim, G. J., Biobaku, T. O., Cho, J., & Parsaei, H. R.
(2014).
Assessing the resiliency and importance of a supply chain network. 1530-1540.
-
Wang, N., Weng, J., Ho, M., Chen, X., Song, G., & Parsaei, H.
(2014).
Development Of A Remote Sma Experiment - A Case Study
-
Chen, X., Osakue, D., Wang, N., Parsaei, H., & Song, G.
(2014).
Development of a remote experiment under a unified remote laboratory framework
-
Biobaku, T., Lim, G., Cho, J., Bora, S., & Parsaei, H.
(2014).
Under-water sonar placement. 3380-3392.
-
Elbashir, N., Parsaei, H. R., & Elmalik, E. E.
(2013).
A New Educational Approach towards Preparing Skilled Chemical Engineers for Special Assignments in the Energy Field. 21.4.1-21.4.6.
-
Garbie, I. H., & Parsaei, H. R.
(2012).
A role of reconfiguring manufacturing enterprise as a major requirement for sustainability. 73-82.
-
Mola, K., & Parsaei, H.
(2010).
Dimensions and Measures of Manufacturing Performance Measurement. 1-6.
-
Mola, K., Mola, K., & Parsaei, H.
(2010).
Integrated Performance Measurement Systems: A Review and Analysis. 1-6.
-
Akladios, M., Lim, G., & Parsaei, H. R.
(2010).
Comparing the effectiveness and students' learning in an introductory engineering economy course offered online versus inclass format
-
El Mola, K., Parsaei, H. R., & Leep, H. R.
(2007).
Improving the performance of a manufacturing system: A practical case study. 323-331.
-
El Mola, K., Parsaei, H. R., & Leep, H. R.
(2007).
Quantifying the effects of operational performance measures using the analytical network process (ANP). 332-341.
-
Garbie, I. H., Parsaei, H. R., Leep, H. R., & Wong, J. P.
(2004).
A new similarity coefficient between a new part and the existing manufacturing cells. 2423-2429.
-
El Mola, K., Parsaei, H. R., Leep, H. R., & Wong, J. P.
(2004).
Design of an effective manufacturing performance measurement system. 607-612.
-
Yang, Y. N., Leep, H. R., Parsaei, H. R., & Chang, D. J.
(1997).
A study of part placement for rapid prototyping process. 385-390.
-
Kumar, A., Wong, J. P., Yang, Y. N., Leep, H. R., Parsaei, H. R., Sullivan, W. G., & Thuesen, G. J.
(1996).
A virtual learning environment for an engineering design course. ASEE Annual Conference Proceedings.
349-353.
-
Callen, W. R., Jeter, S. M., Koblasz, A., Thuesen, G. J., Parsaei, H. R., Leep, H. R., ... Sullivan, W. G.
(1996).
Evaluating students' performance in a new course sequence with economic and design principles in the undergraduate engineering curriculum. ASEE Annual Conference Proceedings.
1463-1467.
-
Nyaluke, A. P., Khamrani, A., Leep, H. R., & Parsaei, H. R.
(1996).
Integrated product design and process development. 71-73.
-
Thuesen, G. J., Hartman, J. C., Sullivan, W. G., Walker, W., Nyaluke, A. P., Yang, Y. N., ... Park, C. S.
(1996).
Integration of economics with engineering design: statistical analysis and findings. 799-802.
-
Yang, Y., Wong, J. P., Kumar, A., Sullivan, W. G., Leep, H. R., Parsaei, H. R., & Thuesen, G. J.
(1996).
A Virtual Learning Environment For An Engineering Design Course. 1.48.1-1.48.5.
-
Sullivan, W. G., Daghestani, S. F., & Parsaei, H. R.
(1996).
Multivariate analysis of student performance in large engineering economy classes. Frontiers in Education Conference.
180-184.
-
An, D., Parsaei, H. R., Leep, H. R., & Nyaluke, A. P.
(1995).
Activity-driven, object-oriented automatic product design shell for computer-integrated manufacturing. 213-216.
-
Callen, W. R., Jeter, S. M., Koblasz, A., Thuesen, G. J., Leep, H. R., Parsaei, H. R., ... Sullivan, W. G.
(1995).
Analysis of results from teaching experimental courses with design and economic principles. ASEE Annual Conference Proceedings.
192-198.
-
Callen, W. R., Jeter, S. M., Koblasz, A., Thuesen, G. J., Leep, H. R., Parsaei, H. R., ... Sullivan, W. G.
(1995).
Evaluation of teaching new engineering science core curriculum with economic and design fundamentals. 610-616.
-
Nyaluke, A. P., An, D., Leep, H. R., & Parsaei, H. R.
(1995).
Rapid prototyping: A new tool to bridge design and manufacturing. ASEE Annual Conference Proceedings.
2658-2662.
-
Callen, W. R., Jeter, S. M., Koblasz, A., Thuesen, G. J., Leep, H. R., Parsaei, H. R., ... Sullivan, W. G.
(1995).
Statistical analysis of students' performance in new engineering science core courses with economic and design concepts. Frontiers in Education Conference.
579-582.
-
CALLEN, W. R., JETER, S. M., KOBLASZ, A., LUXHOJ, J. T., THUESEN, G. J., SULLIVAN, W. G., PARK, C. S., & PARSAEI, H. R.
(1994).
A NEW COURSE SEQUENCE IN THE ENGINEERING SCIENCES WITH A DESIGN AND ECONOMICS PERSPECTIVE. Frontiers in Education Conference.
664-668.
-
CALLEN, W. R., JETER, S. M., KOBLASZ, A., LUXHOJ, J. T., PARK, C. S., PARSAEI, H. R., SULLIVAN, W. G., & THUESEN, G. J.
(1994).
COMPUTER-AIDED ENGINEERING ECONOMICS AND COST ESTIMATING. Frontiers in Education Conference.
674-678.
-
CALLEN, W. R., JETER, S. M., KOBLASZ, A., LUXHOJ, J. T., PARK, C. S., PARSAEI, H. R., SULLIVAN, W. G., & THUESEN, G. J.
(1994).
TEACHING ENGINEERING ECONOMY IN THE CONTEXT OF DESIGN. Frontiers in Education Conference.
669-673.
-
DONG, J. J., PARSAEI, H. R., & GORNET, T.
(1993).
A FEATURE-BASED AUTOMATED PROCESS PLANNING (FBAPP) SYSTEM. 11-15.
-
DAUGHERTY, L. C., PARSAEI, H. R., & KOLLI, S. S.
(1993).
AN EXPERT-SYSTEM FOR THE STRATEGIC JUSTIFICATION OF ADVANCED MANUFACTURING TECHNOLOGY SYSTEMS. 97-101.
-
KOLLI, S. S., WILHELM, M. R., & PARSAEI, H. R.
(1993).
MULTIATTRIBUTE DECISION METHODS FOR THE EVALUATION OF ADVANCED MANUFACTURING SYSTEMS. 72-76.
-
THUESEN, G. J., JETER, S. M., PARK, C. S., SULLIVAN, W. G., KOBLASZ, A., PARSAEI, H. R., ... MALLIK, A. K.
(1993).
THE INTEGRATION OF ECONOMIC-PRINCIPLES WITH DESIGN IN THE ENGINEERING SCIENCE COMPONENT OF THE UNDERGRADUATE CURRICULUM. 77-81.
-
THUESEN, G. J., CALLEN, W. R., KOBLASZ, A., PARK, C. S., SULLIVAN, W. G., JETER, S. M., ... MALLIK, A. K.
(1992).
THE INTEGRATION OF ECONOMIC-PRINCIPLES WITH DESIGN IN THE UNDERGRADUATE CURRICULUM. Proceedings - Frontiers in Education Conference, FIE.
373-378.
-
SONI, R., PARSAEI, H. R., & KHOSRAVIKAMRANI, A.
(1990).
ECONOMIC JUSTIFICATION METHODS FOR ADVANCED AUTOMATED MANUFACTURING SYSTEMS. 146-151.
-
Parsaei, H. R., Cronin, R. E., & Karwowski, W.
(1988).
Economic justification of industrial robots using an expert system. Advances in Instrumentation, Proceedings.
1411-1414.
-
Parsaei, H. R., & Hsie, A. J.
(1985).
COMPUTER-CONTROLLED ROBOT
-
Hsie, A., Parsaei, H., & Rabie, A.
(1984).
INTERFACE ROBOT TO A MICRO-COMPUTER. 130-139.
-
Retnanto, A., Parsaei, H. R., & Parsaei, B.
(2019).
Capacity Building Through Strengthening Professional Skills in Engineering Graduates. Advances in Intelligent Systems and Computing.
146-150.
Research
principal investigator on
Teaching
teaching activities
- ISEN210 Fundamentals Of Ie Design Instructor
- ISEN302 Econ Anly Engr Project Instructor
- ISEN410 Advanced Engineering Economy Instructor
- ISEN460 Capstone Senior Design Instructor
- ISEN608 Indus Case Analysis Instructor
- ISEN667 Engineering Economy Instructor
- ISEN685 Directed Studies Instructor
- ISEN691 Research Instructor
- ITDE684 Professional Internship Instructor
- ITDE691 Research Instructor
- MEEN381 Seminar Instructor
Background
education and training
- M.S. in Industrial Engineering, Western Michigan University - (Kalamazoo, Michigan, United States)
- Ph.D. in Industrial Engineering, The University of Texas at Arlington - (Arlington, Texas, United States)
awards and honors
- Fellows, conferred by American Society For Engineering Education - (Washington D.C., District of Columbia, United States), 2014
- UPS Award for Minority Advancement in Industrial Engineering, conferred by Institute of Industrial Engineers - (Hong Kong, Hong Kong, China), 2006
- Fellow Award, conferred by Institute of Industrial Engineers - (Hong Kong, Hong Kong, China), 1997
Contact
first name
- Hamid
has last name
- Parsaei
mailing address
-
P. O. Box 3131
College Station, Texas 77843
USA
Other
- hamid.parsaei@tamu.edu