ASHRAE Transactions - Texas A&M University (TAMU) Scholar

publication venue for

Nationwide Energy Saving Analysis for Office Buildings with Occupant Centric Building Controls.. 126. 2020
Nationwide energy saving potential evaluation for office buildings with occupant-based building controls. 126:273-281. 2020
A Case Study of Sensitivity Analysis of the Domestic Hot Water System in Large Hotels.. 125. 2019
A Real-Time Platform for Assessment of Chiller-Side Demand Response Strategies.. 125. 2019
Simulation based Fault Impact Analysis for the Secondary School in the US. 125. 2019
Autonomous Robotic Building Energy Audits: Demonstrated Capabilities and Open Challenges. 123:3-20. 2017
Experimental Comparison of Energy-Optimal Coordinated Control Strategies for Heat Pump Systems. 123:162-173. 2017
A Simulation-Based Study on Different Control Strategies for Variable-Speed Pumps in Distributed Ground-Source Heat Pump Systems. 122:173-185. 2016
Model-Based Energy Comparison Performance Analysis of Pumping System performance with Different Control Logics. 122:173-185. 2016
Quantifying Efficiency Gains of Refrigeration Systems Using Advanced Expansion Valve Technology. 122:89-101. 2016
Development of a Reference Building Information Model for Thermal Model Compliance Testing-Part I: Guidelines for Generating Thermal Model Input Files. 122:256-266. 2016
Development of a probabilistic graphical energy performance model for an office building. 120. 2014
Development of Control-Oriented Models for Model Predictive Control in Buildings.. 119. 2013
Secondary control strategies for cycling of air conditioning and refrigeration systems. 118:508-522. 2012
Calibration of a Building Energy Model Considering Parametric Uncertainty. 118:189-196. 2012
Modeling and Calibration of Energy Models for a DoD Building. 117:358-365. 2011
Parameter Estimation of Dynamic Vapor Compression System Models Using Limited Sensor Information. 117:746-758. 2011
Performance analysis of standing column well ground heat exchanger systems. 112:633-+. 2006
Effects of lubricant miscibility and viscosity on the performance of an R-134a refrigerating system. 106. 2000
Uncertainty of 'measured' energy savings from statistical baseline models. 106. 2000
Airflow reduction to improve building comfort and reduce building energy consumption - a case study. 105. 1999
Converting dual-duct constant-volume systems to variable-volume systems without retrofitting the terminal boxes. 105. 1999
Advanced economizer controller for dual-duct air-handling systems - with a case application. 103:256-263. 1997
Baselining methodology for facility-level monthly energy use - Part 1: theoretical aspects. 103:336-347. 1997
Baselining methodology for facility-level monthly energy use - Part 2: application to eight army installations. 103:348-359. 1997
Impacts of static pressure set level on HVAC energy consumption and indoor conditions. 103:221-228. 1997
Use of EMCS recorded data to identify potential savings due to improved HVAC operations and maintenance. 103:122-129. 1997
Effect of R-123 condensate inundation and vapor shear on enhanced tube geometries. 102:273-284. 1996
Effect of R-134a inundation on enhanced tube geometries. 102:285-296. 1996
Spray evaporation heat transfer performance of R-123 in tube bundles. 102:259-271. 1996
The Great Energy Predictor Shootout II: Measuring retrofit savings - Overview and discussion of results. 102:419-435. 1996
Theoretical model for predicting adiabatic capillary tube performance with alternative refrigerants. 102:52-64. 1996
Effect of lubricant on spray evaporation heat transfer performance of R-134a and R-22 in tube bundles. 102:410-426. 1996
Model Predictive Control Performance Assessment of Absorption Refrigeration Cycles Utilizing Different Working Fluids 2021
Systematic Assessment of Working Fluid Mixtures for Absorption Refrigeration Based on Process and Sustainability Indicators 2021
Use of Domestic Water Consumption as Proxy for Occupancy Level in Building Cooling Energy Model 2021
A Simulation-Based Investigation on the Performance of a Hybrid Ground Source Heat Pump System Integrated with Thermal Energy Storage 2020
Application of VFDs to Multiple Pump Sizes in HVAC Systems 2020
Nationwide Energy Saving Analysis for Office Buildings with Occupant Centric Building Controls 2020
Parametric Analysis of Different Binary Mixtures in Solution Heat Exchanger of Absorption Refrigeration System 2020
A Case Study of Sensitivity Analysis of the Domestic Hot Water System in Large Hotels 2019
In-situ observations of series and parallel fan powered terminal units 2019
Development of a Reference Building Information Model (BIM) for Thermal Model Compliance Testing-Part II: Test Cases and Analysis 2019
Analysis of Whole-Building HVAC System Energy Efficiency 2018
Commissioning an Existing Heat Recovery Chiller System at a Large District Plant 2018
Differential Pressure Rise Measurements and Impact in EnergyPlus Modeling for Series VAV Fan-Powered Terminal Units Using PSC Motors 2017
Determination of the Influence of Outdoor Air Intake Fraction on Choosing Independent Variable for Cooling Regression Modeling in Hot and Humid Climates 2016
Airflow Perception and Draught Rating for Varying Thermal Conditions 2014
The Impact of an ECM Blower on the System Performance of a 5-ton Air Conditioner 2014
Verification of Energy Savings from the Implementation of the Residential Building Codes in Texas 2014
Reducing energy consumption in grocery stores: Evaluation of energy efficiency measures 2014
A Statistical Approach to Detect Abnormal Building Energy Consumption with ABCAT 2013
Gender Differences of Thermal Comfort Perception UnderTransient Environmental and Metabolic Conditions 2013
Field-Test of the New ASHRAE/CIBSE/USGBC Performance Measurement Protocols: Intermediate and Advanced Level Indoor Environmental Quality Protocols 2012
A proposed method of test for spoilage of fruits and vegetables 2012
Field-Test of the New ASHRAE/CIBSE/USGBC Performance Measurement Protocols for Commercial Buildings: Basic Level 2012
Use of First Law Energy Balance as a Screening Tool for Building Energy Data: Part II - Experiences of Its Implementation as a Data Quality Control Tool 2012
An Empirical Thermal Comfort Model for Transient Metabolic Conditions 2012
Modeling the Performance of ECM and SCR Parallel Fan-Powered Terminal Units in Single-Duct VAV Systems 2012
Modeling the Performance of ECM and SCR Series Fan-Powered Terminal Units in Single-Duct VAV Systems 2012
Occupancy based heating/cooling for low energy affordable housing in hot-humid climates 2012
Improvements to a Methodology for Estimating Potential Energy Savings from Existing Building-Commissioning/Retrofit Measures 2011
Performance of Parallel Fan-Powered Terminal Units with Electronically Commutated Motors 2011
Performance of Series Fan-Powered Terminal Units with Electronically Commutated Motors 2011
Demonstration of the Use of Multimedia Electronic Information Enhancements for a Chapter Handbook CD-ROM: 3D Modeling and Animation 2010
Development of an Energy Meter Using a Pump Flow Station 2010
Energy use comparison for series vs. parallel fan powered terminal units in a single duct variable air volume system 2010
Infiltration Investigation of a Radiantly Heated and Cooled Office 2010
Performance analysis of a ventilation air heat pump 2010
Performance of VAV fan powered terminal units: An evaluation of operational control strategies for series vs. parallel units 2010
System Analysis of MPCM Slurry Enhanced with Carbon Nanotubes as Heat Transfer Fluid 2010
Pressure losses in 12", 14", and 16" non-Metallic flexible ducts with compression and sag 2009
A Procedure for the Performance Evaluation of a New Commercial Building: Part II-Overall Methodology and Comparison of Methods 2008
Whole-building commercial HVAC system simulation for use in energy consumption fault detection 2007
An experimental investigation of response times for duct-mounted relative humidity transmitters 2007
Decoupled modeling of chilled-water cooling coils 2007
Impact of the position of the radiators on energy consumption and thermal comfort in a mixed radiant and convective heating system 2007
Static pressure losses in nonmetallic flexible duct 2007
Use of first law energy balance as a screening tool for building energy data, part I - Methodology 2006
Accuracy, tests for simulations of VAV dual-duct, single-zone, four-pipe fan-coil, and four-pipe induction air-handling systems 2006
Accuracy tests for simulations of constant volume, dual duct, and variable volume air-handling systems 2005
An experimental evaluation of duct-mounted relative humidity sensors: Part 2 - Accuracy results 2005
An experimental evaluation of duct-mounted relative humidity sensors: Part 3 - Repeatability, hysteresis, and linearity results 2005
An experimental evaluation of duct-mounted relative humidity sensors: Part 1, test and evaluation procedures 2005
Integrated damper and pressure reset for VAV supply air fan control 2004
A comparative study of shell-side condensation on integral-fin tubes with R-114 and R-236ea 2004
Electricity diversity profiles for energy simulation of office buildings 2004
Overview of existing literature on diversity factors and schedules for energy and cooling load calculations 2004
Inverse model toolkit: Application and testing 2003
Inverse modeling toolkit: Numerical algorithms 2003
Air filter-associated fan energy consumption in variable air volume systems 2003
Demonstration of multimedia electronic information enhancements for a handbook chapter CD-ROM: Overview 2003
Characterization of non-sinusoidal measurement station component requirements and errors 2002
Development of a methodology for baselining the energy use of large multi-building central plants 2002
Field monitoring and data validation for evaluating the Performance of Cool Storage Systems 2002
Instrument selection criteria for non-sinusoidal power measurements 2002
Methodology development for determining long-term performance of cool storage systems from short-term tests 2002
Practical optimization of full thermal storage systems operation 2002
Retrocommissioning of central chilled/hot water systems 2002
Results of the HERS BESTEST on an energy simulation computer program 2001
Engineering uncertainty analysis in the evaluation of energy and cost savings of cooling system alternatives based on field-monitored data 1999
Miscibility comparison for three refrigerant mixtures and four component refrigerants 1999
Rehabilitating a thermal energy storage system through commissioning 1999
Baseline calculations for measurement and verification of energy and demand savings in a revolving loan program in Texas 1998
Generalized performance prediction method for adiabatic capillary tubes 1998
Comparison of the heat transfer and pressure drop performance of R-134a-lubricant mixtures in different diameter smooth tubes and micro-fin tubes 1998
Extending the concept of energy delivery efficiency (EDE) of HVAC systems 1998
Heat transfer coefficients and pressure drops for R-134a and an ester lubricant mixture in a smooth tube and a micro-fin tube 1998
Effect of noncondensable gas on the condensation of R-123 on enhanced tube geometries 1997
Effect of time resolution on statistical modeling of cooling energy use in large commercial buildings 1995
Effects of nozzle height and orifice size on spray evaporation heat transfer performance for a low-finned, triangular-pitch tube bundle with R-134A 1995
Effects of surface enhancement, film-feed supply rate, and bundle geometry on spray evaporation heat transfer performance 1995
Evaluation of the ASHRAE method for predicting capillary tube-suction line heat exchanger performance 1995
Impact of using measured weather data vs TMY weather data in a DOE-2 simulation 1995
Reducing building energy costs using improved operation strategies for constant-volume air-handling systems 1995
Atrium buildings: Thermal performance and climatic factors 1995
Is the actual heat loss factor substantially smaller than you calculated? 1995
Comparison of energy prediction of three ground-coupling heat transfer calculation methods 1995
Experimental evaluation of capillary tube-suction line heat exchanger performance with R-152a 1995
Frequency response analysis of ground-coupled building envelope surfaces 1995
Heat transfer of R-134a in single-tube spray evaporation including lubricant effects and enhanced surface results 1995
Foundation heat transfer algorithm for detailed building energy programs 1994
In-tube condensation heat transfer of refrigerant mixtures 1994
In-tube heat transfer and pressure drop of R-134a and ester lubricant mixtures in a smooth tube and a micro-fin tube: part I - evaporation 1994
In-tube heat transfer and pressure drop of R-134a and ester lubricant mixtures in a smooth tube and a micro-fin tube: part II - condensation 1994
Miscibility of seven different lubricants with ten different non-CFC refrigerants 1994
Predicting hourly building energy use: the great energy predictor shootout - overview and discussion of results 1994
Shell-side condensation heat transfer of R-134a - part I: finned-tube performance 1994
Shell-side condensation heat transfer of R-134a - part II: enhanced tube performance 1994
Shell-side condensation heat transfer of R-134a - part III: comparison with R-12 1994
Spray evaporation heat transfer of R-134A on plain tubes 1994
CHARACTERIZING STEAM AND CHILLED-WATER USE FOR A LARGE CAMPUS IN CENTRAL TEXAS 1993
THERMODYNAMIC PROPERTIES OF PENTAFLUOROETHANE (R-125) AND 1,1-DICHLORO-1-FLUOROETHANE (R-141B) 1993
Using solubility data for HFC-134a and ester lubricant mixtures to model an in-tube evaporator or condenser 1993
A STUDY OF ENERGY USE IN GROCERY STORES 1993
Method to account for energy conservation measure interactions 1993
A PROCEDURE FOR CALIBRATING THE DOE-2 SIMULATION PROGRAM TO NON-WEATHER-DEPENDENT MEASURED LOADS 1992
A THERMAL MASS TREATMENT FOR THE TC 4.7 SIMPLIFIED ENERGY ANALYSIS PROCEDURE 1992
COMPARING MONITORING PROTOCOLS FOR ENERGY RETROFITS 1992
MONITORED AIR HANDLER PERFORMANCE AND COMPARISON WITH A SIMPLIFIED SYSTEM MODEL 1992
Monitored commercial building energy data: reporting the results 1992
Multiclimate comparison of the improved TC 4.7 simplified energy analysis procedure with DOE-2 1992
Solubility and viscosity of solutions of HCFC-22 in naphthenic oil and in alkylbenzene at high pressures and temperatures 1991
A HIGH-EFFICIENCY, ORIENTATION-INSENSITIVE EVAPORATOR 1990
Development and use of a mathematical model of an engine-driven heat pump 1990
Gravity-assisted heat pipes using micro-fin tubes for applications in air-to-air heat exchangers 1990
HEAT-TRANSFER AND PRESSURE-DROP OF SPINED PIPE IN CROSS FLOW .1. PRESSURE-DROP STUDIES 1990
HEAT-TRANSFER AND PRESSURE-DROP OF SPINED PIPE IN CROSS FLOW .2. HEAT-TRANSFER STUDIES 1990
HEAT-TRANSFER AND PRESSURE-DROP OF SPINED PIPE IN CROSS FLOW .3. AIR-SIDE PERFORMANCE COMPARISON TO OTHER HEAT-EXCHANGERS 1990
Measurement of solubility and viscosity of oil/refrigerant mixtures at high pressures and temperatures. Test facility and initial results for R-22/naphthenic oil mixtures 1990
Oil quantity measurements in smooth and micro-fin tubes during evaporation and condensation of refrigerant-oil mixtures 1990
ANALYSIS OF CHOKED FLOW CONDITIONS IN A CAPILLARY TUBE-SUCTION LINE HEAT EXCHANGER. 1987
EXPERIMENTAL STUDY OF A MULTIPURPOSE COMMERCIAL BUILDING WITH THREE DIFFERENT HEATING SYSTEMS. 1987
EXPERT SYSTEM FOR BUILDING ENERGY CONSUMPTION ANALYSIS: PROTOTYPE RESULTS. 1987
INTERACTIVE COMPUTER PROGRAM FOR ANALYZING REFRIGERATION CYCLES IN HVAC COURSES. 1987
SURVEY OF REFRIGERANT HEAT TRANSFER AND PRESSURE DROP EMPHASIZING OIL EFFECTS AND IN-TUBE AUGMENTATION. 1987
AUGMENTATION OF R-113 IN-TUBE EVAPORATION WITH MICRO-FIN TUBES. 1986
COMPARISON OF THREE MOIST AIR PROPERTY FORMULATIONS FOR COMPUTER APPLICATIONS. 1986
EXPERIMENTAL STUDY OF A GAS-FIRED RADIANT HEATER AND ENCLOSURE. 1986
EXPERIMENTAL STUDY OF THE TRANSIENT RESPONSE OF A RADIANT PANEL CEILING AND ENCLOSURE. 1986
INTEGRATING MICROCOMPUTER-BASED SPREADSHEETS INTO A HEATING AND COOLING LOAD DESIGN COURSE. 1986
PROPERTIES OF OIL-REFRIGERANT LIQUID MIXTURES WITH APPLICATIONS TO OIL CONCENTRATION MEASUREMENT: PART I - THERMOPHYSICAL AND TRANSPORT PROPERTIES. 1986
PROPERTIES OF OIL-REFRIGERANT LIQUID MIXTURES WITH APPLICATIONS TO OIL CONCENTRATION MEASUREMENT: PART II-ELECTRICAL AND OPTICAL PROPERTIES. 1986
COMPARISON OF SEVEN BASEMENT HEAT LOSS CALCULATION METHODS SUITABLE FOR VARIABLE-BASE DEGREE-DAY CALCULATIONS. 1985
HEAT PUMP WATER HEATERS WITH A COMPARISON TO SOLAR DOMESTIC WATER HEATERS. 1982
STEADY STATE SIMULATION OF A SINGLE TUBE-FINNED CONDENSER HEAT EXCHANGER. 1982
Comparative analysis of CFD P vs. measured P for compressed flexible ducts
Control optimization for chilled water thermal storage system under complicated time-of-use electricity rate schedule

ASHRAE Transactions Journal

Overview

publication venue for

Identity

International Standard Serial Number (ISSN)