ACTA MATERIALIA - Texas A&M University (TAMU) Scholar

publication venue for

A ductility metric for refractory-based multi-principal-element alloys. 257:119104-119104. 2023
Kawin: An open source Kampmann-Wagner Numerical (KWN) phase precipitation and coarsening model. 255:118988-118988. 2023
High-throughput exploration of the WMoVTaNbAl refractory multi-principal-element alloys under multiple-property constraints. 248:118784-118784. 2023
Effects of chemical segregation on ductility-anisotropy in high strength Fe-Mn-Al-C lightweight austenitic steels. 245:118589-118589. 2023
Massive reorientations of bulk single and oligocrystals via solid state processing. 242:118465-118465. 2023
Outgassing of implanted He via short circuit transport along phase and grain boundaries in vapor co-deposited Cu-W nanocomposites. 240:118306-118306. 2022
Unveiling the interaction of nanopatterned void superlattices with irradiation cascades. 239:118282-118282. 2022
Effects of microstructure and composition on constitutive response of high temperature shape memory alloys: Micromechanical modeling using 3-D reconstructions with experimental validation. 232:117929-117929. 2022
Activating dislocation me diate d plasticity in boron carbide through Al-doping. 241:118412-118412. 2022
An atomistic-to-microscale computational analysis of the dislocation pileup-induced local stresses near an interface in plastically deformed two-phase materials. 226:117663-117663. 2022
Efficient machine-learning model for fast assessment of elastic properties of high-entropy alloys. 232:117924-117924. 2022
Laser Powder Bed Fusion of Defect-Free NiTi Shape Memory Alloy Parts with Superior Tensile Superelasticity. 229:117781-117781. 2022
Machine-learning enabled thermodynamic model for the design of new rare-earth compounds. 229:117759-117759. 2022
Microstructure classification in the unsupervised context. 223:117434-117434. 2022
Multi-objective materials bayesian optimization with active learning of design constraints: Design of ductile refractory multi-principal-element alloys. 236:118133-118133. 2022
Towards stacking fault energy engineering in FCC high entropy alloys. 224:117472-117472. 2022
On the importance of microstructure information in materials design: PSP vs PP. 223:117471-117471. 2022
An electronic origin to the oscillatory segregation behavior in Ni-Cr and other BCC defects in FCC metals. 218:117215-117215. 2021
NiTiHf shape memory alloys as phase change thermal storage materials. 218:117175-117175. 2021
Strain glass state in Ni-rich Ni-Ti-Zr shape memory alloys. 218:117232-117232. 2021
A unified description of mechanical and actuation fatigue crack growth in shape memory alloys. 217:117155-117155. 2021
Origins of size effects in initially dislocation-free single-crystal silver micro- and nanocubes. 214:117020-117020. 2021
Strength, plasticity, thermal stability and strain rate sensitivity of nanograined nickel with amorphous ceramic grain boundaries. 212:116918-116918. 2021
In-situ investigation of anisotropic crystalline and bulk negative thermal expansion in titanium alloys. 210:116847-116847. 2021
Significant disparity of non-basal dislocation activities in hot-rolled highly-textured Mg and Mg-3Al-1Zn alloy under tension. 207:116691-116691. 2021
Investigating the compressive strength and strain localization of nanotwinned nickel alloys. 204:116507-116507. 2021
On the low-cycle fatigue response of CoCrNiFeMn high entropy alloy with ultra-fine grain structure. 205:116540-116540. 2021
Competing Interactions between Mesoscale Length-Scales, Order-Disorder, and Martensitic Transformation in Ferromagnetic Shape Memory Alloys. 206:116616-116616. 2021
Controlling martensitic transformation characteristics in defect-free NiTi shape memory alloys fabricated using laser powder bed fusion and a process optimization framework. 215:117017-117017. 2021
Efficiently exploiting process-structure-property relationships in material design by multi-information source fusion. 206:116619-116619. 2021
Metric-driven search for structurally stable inorganic compounds. 202:437-447. 2021
Phase transformation and viscoplasticity coupling in polycrystalline nickel-titanium-hafnium high-temperature shape memory alloys. 221:117381-117381. 2021
Pseudoelastic deformation in Mo-based refractory multi-principal element alloys. 220:117299-117299. 2021
Toughening of interface networks through the introduction of weak links. 215:117090-117090. 2021
Superconducting Cu/Nb nanolaminate by coded accumulative roll bonding and its helium damage characteristics. 197:212-223. 2020
Irradiation damage in (Zr0.25Ta0.25Nb0.25Ti0.25)C high-entropy carbide ceramics. 195:739-749. 2020
Semi-supervised learning approaches to class assignment in ambiguous microstructures. 188:49-62. 2020
Mechanical properties of metallic lithium: from nano to bulk scales. 186:215-222. 2020
Accelerated design of Fe-based soft magnetic materials using machine learning and stochastic optimization. 194:144-155. 2020
An ultra-high strength martensitic steel fabricated using selective laser melting additive manufacturing: Densification, microstructure, and mechanical properties. 186:199-214. 2020
Finite interface dissipation phase field modeling of Ni-Nb under additive manufacturing conditions. 185:320-339. 2020
Mechanical properties and microstructure evolution of Ti2AlC under compression in 25-1100 degrees C temperature range. 189:154-165. 2020
Nanocalorimetry and ab initio study of ternary elements in CuZr-based shape memory alloy. 182:29-38. 2020
The effect of chemical disorder on defect formation and migration in disordered max phases. 184:50-58. 2020
Uncertainty propagation in a multiscale CALPHAD-reinforced elastochemical phase-field model. 183:452-470. 2020
Distinct driven steady states emerge from diverse initial textures in rolled nanocomposites. 183:207-215. 2020
Dynamic martensitic phase transformation in single-crystal silver microcubes. 182:131-143. 2020
Anomalous work hardening behavior of Fe40Mn40Cr10Co10 high entropy alloy single crystals deformed by twinning and slip. 181:555-569. 2019
Effect of temperature on the transition in deformation modes in Mg single crystals. 178:241-248. 2019
Role of microstructure on the actuation fatigue performance of Ni-Rich NiTiHf high temperature shape memory alloys. 175:107-120. 2019
The role of elastic and plastic anisotropy in intergranular spall failure. 168:1-12. 2019
Influence of topological constraints on ion damage resistance of amorphous hydrogenated silicon carbide. 165:587-602. 2019
Two modes of screw dislocation glide in fcc single-phase concentrated alloys. 164:741-748. 2019
An investigation of the microstructure and ductility of annealed cold-rolled tungsten. 162:202-213. 2019
Assessing printability maps in additive manufacturing of metal alloys. 176:199-210. 2019
Bayesian uncertainty quantification and information fusion in CALPHAD-based thermodynamic modeling. 164:636-647. 2019
Effects of composition and crystallographic ordering on the ferromagnetic transition in Ni-Co-Mn-In magnetic shape memory alloys. 166:630-637. 2019
Efficient use of multiple information sources in material design. 180:260-271. 2019
Exploration of the microstructure space in TiAlZrN ultra-hard nanostructured coatings. 174:459-476. 2019
Size effects in the martensitic transformation hysteresis in Ni-Mn-Sn Heusler alloy films. 180:116-125. 2019
Fracture toughness of NiTi-Towards establishing standard test methods for phase transforming materials. 162:226-238. 2019
The formation of highly ordered graphitic interphase around embedded CNTs controls the mechanics of ultra-strong carbonized nanofibers. 162:46-54. 2019
Two way shape memory effect in NiTiHf high temperature shape memory alloy tubes. 163:1-13. 2019
Effects of cold and warm rolling on the shape memory response of Ni50Ti30Hf20 high-temperature shape memory alloy. 157:228-244. 2018
Locating Si atoms in Si-doped boron carbide: A route to understand amorphization mitigation mechanism. 157:106-113. 2018
Void growth and coalescence in a magnesium alloy studied by synchrotron radiation laminography. 155:80-94. 2018
Role of applied stress level on the actuation fatigue behavior of NiTiHf high temperature shape memory alloys. 153:156-168. 2018
Tailoring the mechanical properties of sputter deposited nanotwinned nickel-molybdenum-tungsten films. 144:216-225. 2018
Effects of microstructure on the mechanical properties of Ti2AlC in compression. 143:130-140. 2018
Efficient exploration of the High Entropy Alloy composition-phase space. 152:41-57. 2018
Environmentally enhanced creep crack growth by grain boundary cavitation under cyclic loading. 153:136-146. 2018
Phase transformations in equiatomic CuZr shape memory thin films analyzed by differential nanocalorimetry. 159:320-331. 2018
Probing the entropy hypothesis in highly concentrated alloys. 148:263-279. 2018
On the microstructural origins of martensitic transformation arrest in a NiCoMnIn magnetic shape memory alloy. 142:95-106. 2018
Effects of ion irradiation on structural and mechanical properties of crystalline Fe/amorphous SiOC nanolaminates. 140:10-19. 2017
Effects of upper cycle temperature on the actuation fatigue response of NiTiHf high temperature shape memory alloys. 138:185-197. 2017
Diffusion mechanisms of C in 100, 110 and 111 Fe surfaces studied using kinetic activation-relaxation technique. 136:303-314. 2017
Hydrogen enhances the radiation resistance of amorphous silicon oxycarbides. 136:415-424. 2017
Microstructural characterization of boron-rich boron carbide. 136:202-214. 2017
Effect of tube processing methods on microstructure, mechanical properties and irradiation response of 14YWT nanostructured ferritic alloys. 134:116-127. 2017
Influence of modulus-to-hardness ratio and harmonic parameters on continuous stiffness measurement during nanoindentation. 134:167-176. 2017
Reaction of amorphous/crystalline SiOC/Fe interfaces by thermal annealing. 135:61-67. 2017
The role of emerging grain boundary at iron surface, temperature and hydrogen on metal dusting initiation. 135:340-347. 2017
Radiation instability of equal channel angular extruded T91 at ultra-high damage levels. 132:395-404. 2017
The evolution of the deformation substructure in a Ni-Co-Cr equiatomic solid solution alloy. 132:35-48. 2017
Towards designing anisotropy for ductility enhancement: A theory-driven investigation in Mg-alloys. 131:349-362. 2017
Damage evolution of ion irradiated defected-fluorite La2Zr2O7 epitaxial thin films. 130:111-120. 2017
Three dimensional simulations of texture and triaxiality effects on the plasticity of magnesium alloys. 127:54-72. 2017
Modeling damage accumulation to fracture in a magnesium-rare earth alloy. 124:225-236. 2017
Deformation mechanisms in Ti/TiN multilayer under compressive loading. 122:99-108. 2017
Effect of vanadium micro-alloying on the microstructural evolution and creep behavior of Al-Er-Sc-Zr-Si alloys. 124:501-512. 2017
Effect of vanadium micro-alloying on the microstructural evolution and creep behavior of Al-Er-Sc-Zr-Si alloys (vol 124, pg 501, 2017). 133:440-440. 2017
Multiaxial tension/compression asymmetry of Ti/TiN nano laminates: MD investigation. 135:348-360. 2017
Solute-induced solid-solution softening and hardening in bcc tungsten. 141:304-316. 2017
Acquisition of partial grain orientation information using optical microscopy. 123:70-81. 2017
Relationship between crystallographic compatibility and thermal hysteresis in Ni-rich NiTiHf and NiTiZr high temperature shape memory alloys. 121:374-383. 2016
Dynamic precipitation in Mg-3Al-1Zn alloy during different plastic deformation modes. 116:1-13. 2016
Temperature dependent dispersoid stability in ion-irradiated ferritic-martensitic dual-phase oxide-dispersion-strengthened alloy: Coherent interfaces vs. incoherent interfaces. 116:29-42. 2016
Effect of strain rate and temperature on fracture of magnesium alloy AZ31B. 112:194-208. 2016
Failure of metals I: Brittle and ductile fracture. 107:424-483. 2016
Failure of metals III: Fracture and fatigue of nanostructured metallic materials. 107:508-544. 2016
Direct measure of giant magnetocaloric entropy contributions in Ni-Mn-In. 105:176-181. 2016
A roadmap for tailoring the strength and ductility of ferritic/martensitic T91 steel via thermo-mechanical treatment. 112:361-377. 2016
Room temperature stress-strain hysteresis in Ti2AlC revisited. 105:294-305. 2016
A figure of merit for susceptibility of irradiated amorphous metal alloys to thermal spike-induced plasticity. 102:251-262. 2016
Tailored thermal expansion alloys. 102:333-341. 2016
The effect of precipitates on the superelastic response of [100] oriented FeMnAlNi single crystals under compression. 97:234-244. 2015
Characterization of dislocation structures and deformation mechanisms in as-grown and deformed directionally solidified NiAlMo composites. 89:315-326. 2015
Role of starting texture and deformation modes on low-temperature shear formability and shear localization of Mg-3Al-1Zn alloy. 89:408-422. 2015
Superelastic response of a single crystalline FeMnAlNi shape memory alloy under tension and compression. 89:374-383. 2015
Microstructural evolution of pure magnesium under high strain rate loading. 87:56-67. 2015
Orientation-dependent plastic deformation in transformer steel: Experiments and dislocation dynamics simulations. 84:256-264. 2015
Creep of a nickel-based single-crystal superalloy during very high-temperature jumps followed by synchrotron X-ray diffraction. 84:65-79. 2015
Grain boundary crack growth in metastable titanium beta alloys. 82:167-178. 2015
Heterogeneous nucleation of thermal storage material LiNO3 center dot 3H(2)O from stable lattice-matched nucleation catalysts. 84:265-274. 2015
Multiple ferroic glasses via ordering. 101:107-115. 2015
Resilient ZnO nanowires in an irradiation environment: An in situ study. 95:156-163. 2015
Microstructural characterization and shape memory characteristics of the Ni50.3Ti34.7Hf15 shape memory alloy. 83:48-60. 2015
Partitioning of elastic distortions at a semicoherent heterophase interface between anisotropic crystals. 82:234-243. 2015
Radiation response of amorphous metal alloys: Subcascades, thermal spikes and super-quenched zones. 83:419-430. 2015
Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures. 81:428-441. 2014
Cyclic degradation mechanisms in aged FeNiCoAlTa shape memory single crystals. 79:126-137. 2014
Radiation-induced mixing between metals of low solid solubility. 76:135-150. 2014
Enhanced specific heat capacity of molten salt-based nanomaterials: Effects of nanoparticle dispersion and solvent material. 75:80-91. 2014
Response of equal channel angular extrusion processed ultrafine-grained T91 steel subjected to high temperature heavy ion irradiation. 74:285-295. 2014
The effect of heat treatments on Ni43Mn42Co4Sn11 meta-magnetic shape memory alloys for magnetic refrigeration. 74:66-84. 2014
Kinetics of a fast moving twin boundary in nickel. 68:82-92. 2014
Interface structure of Nb films on single crystal MgO(100) and MgO(111) substrates. 64:100-112. 2014
Temperature-dependent thermal properties of a shape memory alloy/MAX phase composite: Experiments and modeling. 68:267-278. 2014
Characterization of deformation anisotropies in an -Ti alloy by nanoindentation and electron microscopy. 61:4743-4756. 2013
Determining the Burgers vectors and elastic strain energies of interface dislocation arrays using anisotropic elasticity theory. 61:5172-5187. 2013
Incipient plasticity and deformation mechanisms in single-crystal Mg during spherical nanoindentation. 61:2953-2965. 2013
The effect of nanoprecipitates on the superelastic properties of FeNiCoAlTa shape memory alloy single crystals. 61:3445-3455. 2013
A simple stochastic model for yielding in specimens with limited number of dislocations. 61:2489-2499. 2013
Controlling texture in magnesium alloy sheet by shear-based deformation processing. 61:6843-6856. 2013
Development of a kinetic model for bainitic isothermal transformation in transformation-induced plasticity steels. 61:2884-2894. 2013
Phase-field simulations of intermetallic compound evolution in Cu/Sn solder joints under electromigration. 61:7142-7154. 2013
Phenomenological modeling of the effect of specimen thickness on the creep response of Ni-based superalloy single crystals. 61:6506-6516. 2013
The effect of pre-existing defects on the strength and deformation behavior of alpha-Fe nanopillars. 61:439-452. 2013
Direct measurement of large reversible magnetic-field-induced strain in Ni-Co-Mn-In metamagnetic shape memory alloys. 60:6883-6891. 2012
Defect microstructure in heavy-ion-bombarded (0001) ZnO. 60:6086-6090. 2012
Effect of grain boundary character on sink efficiency. 60:6341-6351. 2012
Cohesive interface simulations of indentation cracking as a fracture toughness measurement method for brittle materials. 60:5448-5467. 2012
Size effects in the superelastic response of Ni54Fe19Ga27 shape memory alloy pillars with a two stage martensitic transformation. 60:5670-5685. 2012
Experimental and computational study of the morphological evolution of intermetallic compound (Cu6Sn5) layers at the Cu/Sn interface under isothermal soldering conditions. 60:5125-5134. 2012
Shape memory behavior and tension-compression asymmetry of a FeNiCoAlTa single-crystalline shape memory alloy. 60:2186-2195. 2012
Concurrent nucleation, formation and growth of two intermetallic compounds (Cu6Sn5 and Cu3Sn) during the early stages of lead-free soldering. 60:923-934. 2012
Effect of specimen thickness on the creep response of a Ni-based single-crystal superalloy. 60:5697-5711. 2012
Microstructural evolution and mechanical properties of niobium processed by equal channel angular extrusion up to 24 passes. 60:2310-2323. 2012
Microstructure and tensile behavior of a friction stir processed magnesium alloy. 60:5079-5088. 2012
Multi-phase microstructure design of a low-alloy TRIP-assisted steel through a combined computational and experimental methodology. 60:3022-3033. 2012
Phase-field simulations of intermetallic compound growth in Cu/Sn/Cu sandwich structure under transient liquid phase bonding conditions. 60:6278-6287. 2012
Processing and characterization of porous Ti2AlC with controlled porosity and pore size. 60:6266-6277. 2012
The effect of electronic and magnetic valences on the martensitic transformation of CoNiGa shape memory alloys. 60:3545-3558. 2012
Thermodynamic analysis of two-stage heat treatment in TRIP steels. 60:6120-6130. 2012
Coarsening by network restructuring in model nanoporous gold. 59:7645-7653. 2011
Effect of internal oxidation on wear behavior of ultrafine-grained Nb-Zr. 59:7683-7694. 2011
Structure, shear resistance and interaction with point defects of interfaces in CuNb nanocomposites synthesized by severe plastic deformation. 59:7744-7756. 2011
Suppression of irradiation hardening in nanoscale V/Ag multilayers. 59:6331-6340. 2011
Minimal compliance design for metal-ceramic composites with lamellar microstructures. 59:4835-4846. 2011
Shape memory characteristics of Ti49.5Ni25Pd25Sc0.5 high-temperature shape memory alloy after severe plastic deformation. 59:4747-4760. 2011
Work hardening in micropillar compression: In situ experiments and modeling. 59:3825-3840. 2011
Scanning transmission electron microscope observations of defects in as-grown and pre-strained Mo alloy fibers. 59:2172-2179. 2011
Atomistic processes of dislocation generation and plastic deformation during nanoindentation. 59:934-942. 2011
Microstructure and martensitic transformation characteristics of CoNiGa high temperature shape memory alloys. 59:1168-1183. 2011
Monte Carlo simulation for investigating influence of junction and nanofiber properties on electrical conductivity of segregated-network nanocomposites. 59:4548-4555. 2011
Phase transformation in free-standing SMA nanowires. 59:1871-1880. 2011
Role of severe plastic deformation on the cyclic reversibility of a Ti50.3Ni33.7Pd16 high temperature shape memory alloy. 58:6411-6420. 2010
Fundamental studies on stress-corrosion cracking in iron and underlying mechanisms. 58:5142-5149. 2010
A micromechanical formulation for piezoelectric fiber composites with nonlinear and viscoelastic constituents. 58:3332-3344. 2010
Size effects in aluminium alloy castings. 58:3006-3013. 2010
Superelastic cycling and room temperature recovery of Ti74Nb26 shape memory alloy. 58:2216-2224. 2010
Early stages of intermetallic compound formation and growth during lead-free soldering. 58:4900-4910. 2010
Experimental and microstructural characterization of simultaneous creep, plasticity and phase transformation in Ti50Pd40Ni10 high-temperature shape memory alloy. 58:1618-1628. 2010
Investigation of the structural stability of Co2NiGa shape memory alloys via ab initio methods. 58:5220-5231. 2010
Pulsed laser deposition-induced reduction of SrTiO3 crystals. 58:457-463. 2010
Thermal stability of nanocrystalline Pd81Zr19. 58:4292-4297. 2010
Cyclic deformation and austenite stabilization in Co35Ni35Al30 single crystalline high-temperature shape memory alloys. 57:6123-6134. 2009
Plastic flow anisotropy of pure zirconium after severe plastic deformation at room temperature. 57:4855-4865. 2009
On thermal and vibrational properties of LaGaO3 single crystals. 57:2984-2992. 2009
Strain rate effect on toughening of nano-sized PEP-PEO block copolymer modified epoxy. 57:2691-2701. 2009
Effects of focused ion beam milling on the compressive behavior of directionally solidified micropillars and the nanoindentation response of an electropolished surface. 57:503-510. 2009
A discrete dislocation analysis of the Bauschinger effect in microcrystals. 56:5477-5491. 2008
Effects of pre-strain on the compressive stressstrain response of Mo-alloy single-crystal micropillars. 56:4762-4770. 2008
Extraction of flow properties of single-crystal silicon carbide by nanoindentation and finite-element simulation. 56:3824-3832. 2008
Influence of indenter angle on cracking in Si and Ge during nanoindentation. 56:4458-4469. 2008
Thermomechanical cyclic response of an ultrafine-grained NiTi shape memory alloy. 56:3630-3646. 2008
Micro structure-mechanical property relationships in ultrafine-grained NbZr. 55:6596-6605. 2007
The effect of indenter angle on the microindentation hardness. 55:6127-6132. 2007
Tension-compression asymmetry in severely deformed pure copper. 55:4603-4613. 2007
Defect structures and ternary lattice site preference of the B2 phase in the Al-Ni-Ru system. 55:4781-4787. 2007
Discrete dislocation analysis of the wedge indentation of polycrystals. 55:6408-6415. 2007
On the stress-assisted magnetic-field-induced phase transformation in Ni2MnGa ferromagnetic shape memory alloys. 55:4253-4269. 2007
Flow stress anisotropy and Bauschinger effect in ultrafine grained copper. 54:5477-5488. 2006
Mechanical twinning and texture evolution in severely deformed Ti-6Al-4V at high temperatures. 54:3755-3771. 2006
Finite-temperature thermodynamic and vibrational properties of Al-Ni-Y compounds via first-principles calculations. 54:2291-2304. 2006
A continuum model for the anisotropic creep of single crystal nickel-based superalloys. 54:1487-1500. 2006
First-principles calculations of the Zn-Zr system. 54:473-482. 2006
On the elastic properties and mechanical damping of Ti3SiC2, Ti3GeC2, Ti3Si0.5Al0.5C2 and Ti2AlC in the 3001573K temperature range. 54:2757-2767. 2006
Thermodynamic modeling of the Ca-Sn system based on finite temperature quantities from first-principles and experiment. 54:4939-4951. 2006
Magnetic field and stress induced martensite reorientation in NiMnGa ferromagnetic shape memory alloy single crystals. 54:233-245. 2006
The stored energy of cold work: Predictions from discrete dislocation plasticity. 53:4765-4779. 2005
Ab initio thermodynamic properties of stoichiometric phases in the Ni-Al system. 53:1809-1819. 2005
Indentation-induced phase transformations in silicon: influences of load, rate and indenter angle on the transformation behavior. 53:1759-1770. 2005
A continuum model for the creep of single crystal nickel-base superalloys. 53:669-679. 2005
Effect of strain path on texture and annealing, microstructure development in bulk pure copper processed by simple shear. 53:801-810. 2005
Compressive creep of fine and coarse-grained T3SiC2 in air in the 11001300C temperature range. 53:4963-4973. 2005
Anisotropic ductile fracture Part I: experiments. 52:4623-4638. 2004
Anisotropic ductile fracture Part II: theory. 52:4639-4650. 2004
Fracture behavior of alpha-zirconium phosphate-based epoxy nanocomposites. 52:2239-2250. 2004
Enhanced hardening in Cu/330 stainless steel multilayers by nanoscale twinning. 52:995-1002. 2004
Adiabatic shear banding in ultrafine-grained Fe processed by severe plastic deformation. 52:1859-1869. 2004
Discrete dislocation plasticity analysis of static friction. 52:3135-3149. 2004
Mechanical properties of tape cast nickel-based anode materials for solid oxide fuel cells before and after reduction in hydrogen. 52:5747-5756. 2004
Microstructural refinement of cast p-type Bi2Te3-Sb2Te3 by equal channel angular extrusion. 52:49-55. 2004
Scratch damage of polymers in nanoscale. 52:431-443. 2004
Directional solidification and microstructures of near-eutectic CrCr3Si alloys. 51:6241-6252. 2003
Scaling of discrete dislocation predictions for near-threshold fatigue crack growth. 51:4637-4651. 2003
Discrete dislocation plasticity modeling of short cracks in single crystals. 51:1-15. 2003
Effect of temperature, strain rate and grain size on the mechanical response of Ti3SiC2 in tension. 50:1297-1306. 2002
Competing mechanisms and modeling of deformation in austenitic stainless steel single crystals with and without nitrogen. 49:3919-3933. 2001
Straintemperature behavior of NiTiCu shape memory single crystals. 49:3621-3634. 2001
A discrete dislocation analysis of near-threshold fatigue crack growth. 49:3189-3203. 2001
Smaller is softer: An inverse size effect in a cast aluminum alloy. 49:3071-3083. 2001
Tensile creep of fine grained (35 m) Ti3SiC2 in the 10001200C temperature range. 49:4103-4112. 2001
Compressive response of NiTi single crystals. 48:3311-3326. 2000
Hydrogen defects in alpha-Al2O3 and water weakening of sapphire and alumina ceramics between 600 and 1000 degrees C - I. - Infrared characterization of defects. 48:1481-1494. 2000
Hydrogen defects in alpha-Al2O3 and water weakening of sapphire and alumina ceramics between 600 and 1000 degrees C - II. - Mechanical properties. 48:1495-1504. 2000
Tensile properties of Ti3SiC2 in the 251300C temperature range. 48:453-459. 2000
Computational mechanics at the mesoscale. 48:105-124. 2000
A phenomenological model of twinning based on dual reference structures. 46:1235-1248. 1998
Comparison of discrete dislocation and continuum plasticity predictions for a composite material. 45:3163-3179. 1997
Epitaxy of Pt thin films on (001) MgOI. Interface energetics and misfit accommodation. 45:869-878. 1997
Epitaxy of Pt thin films on (001) MgOII: Orientation evolution from nucleation through coalescence. 45:879-887. 1997
Comparison of discrete dislocation and continuum plasticity predictions for a composite material. 45:3163-3179. 1997
TEM study of structural and micro structural characteristics of a precipitate phase in Ni-rich Ni-Ti-Hf and Ni-Ti-Zr shape memory alloys. 61:6191-6206.
On the interfacial phase growth and vacancy evolution during accelerated electromigration in Cu/Sn/Cu microjoints 2018

ACTA MATERIALIA Journal

Overview

publication venue for

Identity

International Standard Serial Number (ISSN)