HR job title
- Professor
- Contact Info
- 1 979 845 5114
Radovic, Miladin Professor
Positions
- Associate Professor and Associate Department Head, Materials Science and Engineering, College of Engineering
- Faculty Affiliate, Energy Institute, Texas A&M Engineering Experiment Station (TEES)
My research interests include: Processing of advanced ceramics and ceramics composites including ternary carbides and nitrides (MAX phases), Solid state ionics, inorganic polymers (Geopolymers) and their composites; High temperature materials for energy applications; Characterization and modeling of mechanical properties of ceramic and ceramic composites; and
Resonant Ultrasound Spectroscopy.
Resonant Ultrasound Spectroscopy.
- Overview
- Publications
- Research
- Teaching
- Works By Students
- Background
- Contact
- Other
- View All
Overview
Publications
selected publications
-
academic article
-
Rathod, H. J., Ouisse, T., Radovic, M., & Srivastava, A.
(2021).
Room temperature crack-healing in an atomically layered ternary carbide. Science Advances.
7(33), eabg2549.
-
Zhan, Z., Chen, Y., Radovic, M., & Srivastava, A.
(2020).
Non-classical crystallographic slip in a ternary carbide - Ti2AlC. MATERIALS RESEARCH LETTERS.
8(7), 275-281.
-
Echols, I. J., An, H., Zhao, X., Prehn, E. M., Tan, Z., Radovic, M., Green, M. J., & Lutkenhaus, J. L.
(2020).
pH-Response of polycation/Ti3C2Tx MXene layer-by-layer assemblies for use as resistive sensors. Molecular Systems Design && Engineering.
5(1), 366-375.
-
Benitez, R., Kan, W. H., Gao, H., O'Neal, M., Proust, G., Srivastava, A., & Radovic, M.
(2020).
Mechanical properties and microstructure evolution of Ti2AlC under compression in 25-1100 degrees C temperature range. ACTA MATERIALIA.
189, 154-165.
-
Kuliiev, R., Orlovskaya, N., Hyer, H., Sohn, Y., Lugovy, M., Ha, D., ... Blugan, G.
(2020).
Spark Plasma Sintered B4C-Structural, Thermal, Electrical and Mechanical Properties. Materials.
13(7), 1612-1612.
-
Zhao, X., Radovic, M., & Green, M. J.
(2020).
Synthesizing MXene Nanosheets by Water-free Etching. Chem.
6(3), 544-546.
-
Yun, J., Echols, I., Flouda, P., Wang, S., Easley, A., Zhao, X., ... Lutkenhaus, J. L.
(2019).
Layer-by-Layer Assembly of Polyaniline Nanofibers and MXene Thin-Film Electrodes for Electrochemical Energy Storage. ACS Applied Materials & Interfaces.
11(51), 47929-47938.
-
Habib, T., Zhao, X., Shah, S. A., Chen, Y., Sun, W., An, H., ... Green, M. J.
(2019).
Oxidation stability of Ti3C2Tx MXene nanosheets in solvents and composite films. 3(1), 8.
-
Patil, N., Zhao, X., Mishra, N. K., Saed, M. A., Radovic, M., & Green, M. J.
(2019).
Rapid Heating of Silicon Carbide Fibers under Radio Frequency Fields and Application in Curing Preceramic Polymer Composites. ACS Applied Materials & Interfaces.
11(49), 46132-46139.
-
Patil, N., Camacho, A. C., Mishra, N. K., Singhla, P., Sweeney, C. B., Saed, M. A., Radovic, M., & Green, M. J.
(2019).
Radio Frequency and Microwave Heating of Preceramic Polymer Nanocomposites with Applications in Mold-Free Processing. 21(8), 1900276-1900276.
-
An, H., Habib, T., Shah, S., Gao, H., Patel, A., Echols, I., ... Lutkenhaus, J. L.
(2019).
Water Sorption in MXene/Polyelectrolyte Multilayers for Ultrafast Humidity Sensing. ACS Applied Nano Materials.
2(2), 948-955.
-
Lakhe, P., Prehn, E. M., Habib, T., Lutkenhaus, J. L., Radovic, M., Mannan, M. S., & Green, M. J.
(2019).
Process Safety Analysis for Ti3C2Tx MXene Synthesis and Processing. 58(4), 1570-1579.
-
Chen, Y., Kota, S., Barsoum, M. W., & Radovic, M.
(2019).
Compressive deformation of MoAIB up to 1100 degrees C. Journal of Alloys and Compounds.
774, 1216-1222.
-
Carrasco-Pena, A., Jordan, R., Dieguez, J., Coronado-Rodriguez, A., Ozdemir, V. B., Kwok, K., ... Reece, M. J.
(2019).
Design and development of ring-on-ring jig for biaxial strength testing of brittle ceramic composite materials: ZrB2-30wt-%SiB6. 118(4), 159-168.
-
Habib, T., Patil, N., Zhao, X., Prehn, E., Anas, M., Lutkenhaus, J. L., Radovic, M., & Green, M. J.
(2019).
Heating of Ti3C2Tx MXene/polymer composites in response to Radio Frequency fields. Scientific Reports.
9(1), 16489.
-
Garlea, E., Radovic, M., & Liaw, P. K.
(2019).
High-temperature dependency of elastic mechanical behavior of two wrought magnesium alloys AZ31B and ZK60A studied by resonant ultrasound spectroscopy. Materials Science & Engineering: A.
758, 86-95.
-
Son, W., Duong, T., Talapatra, A., Prehn, E., Tan, Z., Radovic, M., & Arroyave, R.
(2018).
Minimal effect of stacking number on intrinsic cleavage and shear behavior of Tin+1AlCn and Tan+1AlCn MAX phases. Journal of Applied Physics.
123(22), 225102-225102.
-
Xing, J., Radovic, M., & Muliana, A. H.
(2018).
Elastic and Dielectric Properties of Active Ag/BaTiO3 Composites. Experimental mechanics.
58(4), 645-660.
-
An, H., Habib, T., Shah, S., Gao, H., Radovic, M., Green, M. J., & Lutkenhaus, J. L.
(2018).
Surface-agnostic highly stretchable and bendable conductive MXene multilayers. Science Advances.
4(3), eaaq0118.
-
Arroyave, R., Talapatra, A., Duong, T., Son, W., & Radovic, M.
(2018).
Out-of-plane ordering in quaternary MAX alloys: an alloy theoretic perspective. MATERIALS RESEARCH LETTERS.
6(1), 1-12.
-
Sarwar, J., Shrouf, T., Srinivasa, A., Gao, H., Radovic, M., & Kakosimos, K.
(2018).
Characterization of thermal performance, flux transmission performance and optical properties of MAX phase materials under concentrated solar irradiation. Solar Energy Materials and Solar Cells.
182, 76-91.
-
Xing, J., Muliana, A., & Radovic, M.
(2018).
Characterization of thermal transport properties of Ag/BaTiO3 composites using hot disk: Numerical simulations. International Journal of Heat and Mass Transfer.
116, 599-608.
-
Benitez, R., Gao, H., O'Neal, M., Lovelace, P., Proust, G., & Radovic, M.
(2018).
Effects of microstructure on the mechanical properties of Ti2AlC in compression. ACTA MATERIALIA.
143, 130-140.
-
Velasco, B., Gordo, E., Hu, L., Radovic, M., & Tsipas, S. A.
(2018).
Influence of porosity on elastic properties of Ti2AlC and Ti3SiC2 MAX phase foams. Journal of Alloys and Compounds.
764, 24-35.
-
Kota, S., Chen, Y., Wang, J., May, S. J., Radovic, M., & Barsoum, M. W.
(2018).
Synthesis and characterization of the atomic laminate Mn2AlB2. Journal of the European Ceramic Society.
38(16), 5333-5340.
-
Lugovy, M., Orlovskaya, N., Pathak, S., Radovic, M., Lara-Curzio, E., Verbylo, D., ... Reece, M. J.
(2018).
Time and frequency dependent mechanical properties of LaCoO3-based perovskites: Internal friction and negative creep. Journal of Applied Physics.
124(20), 205103-205103.
-
Xing, J., Radovic, M., & Muliana, A.
(2017).
A nonlinear constitutive model for describing cyclic mechanical responses of composites. ACTA MECHANICA.
228(6), 2017-2032.
-
Son, W., Gao, H., Duong, T., Talapatra, A., Radovic, M., & Arroyave, R.
(2017).
Effect of A mixing on elastic modulus, cleavage stress, and shear stress in the Ti-3(SixAl1-x)C-2 MAX phase. Physical review B (PRB).
95(23), 235131.
-
Parrikar, P. N., Benitez, R., Gao, H., Radovic, M., & Shukla, A.
(2017).
The Effect of Grain Size on Deformation and Failure of Ti2AlC MAX Phase under Thermo-Mechanical Loading. Experimental mechanics.
57(5), 675-685.
-
Arroyave, R., Talapatra, A., Duong, T., Son, W., Gao, H., & Radovic, M.
(2017).
Does aluminum play well with others? Intrinsic Al-A alloying behavior in 211/312 MAX phases. MATERIALS RESEARCH LETTERS.
5(3), 170-178.
-
Kota, S., Agne, M., Zapata-Solvas, E., Dezellus, O., Lopez, D., Gardiola, B., Radovic, M., & Barsoum, M. W.
(2017).
Elastic properties, thermal stability, and thermodynamic parameters of MoAlB. Physical review B (PRB).
95(14), 144108.
-
Jovic, B. M., Jovic, V. D., Brankovic, G., Radovic, M., & Krstajic, N. V.
(2017).
Hydrogen evolution in acid solution at Pd electrodeposited onto Ti2AlC. Electrochimica Acta.
224, 571-584.
-
Duong, T. C., Talapatra, A., Son, W., Radovic, M., & Arryave, R.
(2017).
On the stochastic phase stability of Ti2AlC-Cr2AlC. Scientific Reports.
7(1), 5138.
-
Gao, P., Bolon, A., Taneja, M., Xie, Z., Orlovskaya, N., & Radovic, M.
(2017).
Thermal expansion and elastic moduli of electrolyte materials for high and intermediate temperature solid oxide fuel cell. Solid State Ionics.
300, 1-9.
-
Sun, W., Shah, S. A., Chen, Y., Tan, Z., Gao, H., Habib, T., Radovic, M., & Green, M. J.
(2017).
Electrochemical etching of Ti2AlC to Ti2CTx (MXene) in low-concentration hydrochloric acid solution. Journal of Materials Chemistry A.
5(41), 21663-21668.
-
Kota, S., Zapata-Solvas, E., Chen, Y., Radovic, M., Lee, W. E., & Barsoum, M. W.
(2017).
Isothermal and Cyclic Oxidation of MoAlB in Air from 1100 degrees C to 1400 degrees C. Journal of the Electrochemical Society.
164(13), C930-C938.
-
Shah, S. A., Habib, T., Gao, H., Gao, P., Sun, W., Green, M. J., & Radovic, M.
(2016).
Template-free 3D titanium carbide (Ti3C2Tx) MXene particles crumpled by capillary forces. Chemical Communications.
53(2), 400-403.
-
Talapatra, A., Duong, T., Son, W., Gao, H., Radovic, M., & Arroyave, R.
(2016).
High-throughput combinatorial study of the effect of M site alloying on the solid solution behavior of M2AlC MAX phases. Physical review B (PRB).
94(10), 104106.
-
Hanaor, D., Hu, L., Kan, W. H., Proust, G., Foley, M., Karaman, I., & Radovic, M.
(2016).
Compressive performance and crack propagation in Al alloy/Ti2AlC composites. Materials Science & Engineering: A.
672, 247-256.
-
Coppola, A. M., Hu, L., Thakre, P. R., Radovic, M., Karaman, I., Sottos, N. R., & White, S. R.
(2016).
Active Cooling of a Microvascular Shape Memory Alloy-Polymer Matrix Composite Hybrid Material. Advanced Engineering Materials.
18(7), 1145-1153.
-
Son, W., Thien, D., Talapatra, A., Gao, H., Arroyave, R., & Radovic, M.
(2016).
Ab-initio investigation of the finite-temperatures structural, elastic, and thermodynamic properties of Ti3AlC2 and Ti3SiC2. COMPUTATIONAL MATERIALS SCIENCE.
124, 420-427.
-
Hu, L., O'Neil, M., Erturun, V., Benitez, R., Proust, G., Karaman, I., & Radovic, M.
(2016).
High-Performance Metal/Carbide Composites with Far-From-Equilibrium Compositions and Controlled Microstructures. Scientific Reports.
6(1), 35523.
-
Stadelmann, R., Lugovy, M., Orlovskaya, N., Mchaffey, P., Radovic, M., Sglavo, V. M., Grasso, S., & Reece, M. J.
(2016).
Mechanical properties and residual stresses in ZrB2-SiC spark plasma sintered ceramic composites. Journal of the European Ceramic Society.
36(7), 1527-1537.
-
Stadelmann, R., Lugovy, M., Orlovskaya, N., Mchaffey, P., Radovic, M., Sglavo, V. M., Grasso, S., & Reece, M. J.
(2016).
Mechanical properties and residual stresses in ZrB2-SiC spark plasma sintered ceramic composites (vol 36, pg 1527, 2016). Journal of the European Ceramic Society.
36(14), 3545-3545.
-
Parrikar, P. N., Benitez, R., Gao, H., Radovic, M., & Shukla, A.
(2016).
Mechanical response of fine grained Ti2AlC under extreme thermo-mechanical loading conditions. Materials Science & Engineering: A.
658, 176-184.
-
Benitez, R., Kan, W. H., Gao, H., O'Neal, M., Proust, G., & Radovic, M.
(2016).
Room temperature stress-strain hysteresis in Ti2AlC revisited. ACTA MATERIALIA.
105, 294-305.
-
Jovic, B. M., Jovic, V. D., Lacnjevac, U. C., Stevanovic, S. I., Kovac, J., Radovic, M., & Krstajic, N. V.
(2016).
Ru layers electrodeposited onto highly stable Ti2AlC substrates as cathodes for hydrogen evolution in sulfuric acid solutions. Journal of Electroanalytical Chemistry.
766, 78-86.
-
Agne, M. T., Radovic, M., Bentzel, G. W., & Barsoum, M. W.
(2016).
Stability of V2AlC with Al in 800-1000 degrees C temperature range and in situ synthesis of V2AlC/Al composites. Journal of Alloys and Compounds.
666, 279-286.
-
Gao, H., Benitez, R., Son, W., Arroyave, R., & Radovic, M.
(2016).
Structural, physical and mechanical properties of Ti-3(Al1-xSix)C-2 solid solution with x=0-1. Materials Science & Engineering: A.
676, 197-208.
-
Xing, J., Radovic, M., & Muliana, A.
(2016).
Thermal properties of BaTiO3/Ag composites at different temperatures. Composites Part B: Engineering.
90, 287-301.
-
Brankovic, Z., Golic, D. L., Radojkovic, A., Cirkovic, J., Pajic, D., Stanojevic, Z. M., ... Brankovic, G.
(2016).
Spark plasma sintering of hydrothermally synthesized bismuth ferrite. Processing and Application of Ceramics.
10(4), 257-264.
-
Dapcevic, A., Poleti, D., Rogan, J., Radojkovic, A., Radovic, M., & Brankovic, G.
(2015).
A new electrolyte based on Tm3+-doped delta-Bi2O3-type phase with enhanced conductivity. Solid State Ionics.
280, 18-23.
-
Xie, Z., Lugovy, M., Orlovskaya, N., Graule, T., Kuebler, J., Mueller, M., ... Cullen, D. A.
(2015).
Hexagonal OsB2: Sintering, microstructure and mechanical properties. Journal of Alloys and Compounds.
634, 168-178.
-
Kothalkar, A., Cerit, A., Proust, G., Basu, S., Radovic, M., & Karaman, I.
(2015).
Interfacial study of NiTi-Ti3SiC2 solid state diffusion bonded joints. Materials Science & Engineering: A.
622, 168-177.
-
Gao, P., Lara-Curzio, E., Trejo, R., & Radovic, M.
(2015).
Dynamic Mechanical Analysis of Phase Transformations and Anelastic Relaxation in Stabilized Zirconias. Journal of the Electrochemical Society.
162(1), F14-F22.
-
Gao, P., Lara-Curzio, E., Trejo, R., & Radovic, M.
(2015).
Dynamic Mechanical Analysis of Phase Transformations and Anelastic Relaxation in Stabilized Zirconias (vol 162, pg F14, 2015). Journal of the Electrochemical Society.
162(4), X9-X9.
-
Zhou, Y., Jung, E., Arroyave, R., Radovic, M., & Shamberger, P.
(2015).
Incorporating Research Experiences into an Introductory Materials Science Course. INTERNATIONAL JOURNAL OF ENGINEERING EDUCATION.
31(6), 1491-1503.
-
Hu, L., Kothalkar, A., O'Neil, M., Karaman, I., & Radovic, M.
(2014).
Current-Activated, Pressure-Assisted Infiltration: A Novel, Versatile Route for Producing Interpenetrating Ceramic-Metal Composites. MATERIALS RESEARCH LETTERS.
2(3), 124-130.
-
Kothalkar, A. D., Benitez, R., Hu, L., Radovic, M., & Karaman, I.
(2014).
Thermo-mechanical Response and Damping Behavior of Shape Memory Alloy-MAX Phase Composites. Metallurgical and Materials Transactions A.
45A(5), 2646-2658.
-
Gudlur, P., Muliana, A., & Radovic, M.
(2014).
Effective thermo-mechanical properties of aluminum-alumina composites using numerical approach. Composites Part B: Engineering.
58, 534-543.
-
Hu, L., Kothalkar, A., Proust, G., Karaman, I., & Radovic, M.
(2014).
Fabrication and characterization of NiTi/Ti3SiC2 and NiTi/Ti2AlC composites. Journal of Alloys and Compounds.
610, 635-644.
-
Bhattacharya, R., Benitez, R., Radovic, M., & Goulbourne, N. C.
(2014).
High strain-rate response and deformation mechanisms in polycrystalline Ti2AlC. Materials Science & Engineering: A.
598, 319-326.
-
Gudlur, P., Boczek, A., Radovic, M., & Muliana, A.
(2014).
On characterizing the mechanical properties of aluminum-alumina composites. Materials Science & Engineering: A.
590, 352-359.
-
Cheng, F., Hu, L., Reddy, J. N., Karaman, I., Hoffman, E., & Radovic, M.
(2014).
Temperature-dependent thermal properties of a shape memory alloy/MAX phase composite: Experiments and modeling. ACTA MATERIALIA.
68, 267-278.
-
Gudlur, P., Muliana, A., & Radovic, M.
(2014).
The effect of microstructural morphology on the elastic, inelastic, and degradation behaviors of aluminum-alumina composites. Mechanics Research Communications.
57, 49-56.
-
Hu, L., Karaman, I., & Radovic, M.
(2013).
Simple, inexpensive synthesis of damage-tolerant MAX phase foams. AMERICAN CERAMIC SOCIETY BULLETIN.
92(5), 31-32.
-
Radovic, M., & Barsoum, M. W.
(2013).
MAX phases: Bridging the gap between metals and ceramics. AMERICAN CERAMIC SOCIETY BULLETIN.
92(3), 20-27.
-
Lizcano, M., Gonzalez, A., Basu, S., Lozano, K., & Radovic, M.
(2012).
Effects of Water Content and Chemical Composition on Structural Properties of Alkaline Activated Metakaolin-Based Geopolymers. Journal of The American Ceramic Society.
95(7), 2169-2177.
-
Basu, S., Obando, N., Gowdy, A., Karaman, I., & Radovic, M.
(2012).
Long-Term Oxidation of Ti2AlC in Air and Water Vapor at 1000-1300 degrees C Temperature Range (vol 159, pg C90, 2012). Journal of the Electrochemical Society.
159(5), S9-S9.
-
Lizcano, M., Kim, H. S., Basu, S., & Radovic, M.
(2012).
Mechanical properties of sodium and potassium activated metakaolin-based geopolymers. 47(6), 2607-2616.
-
Basu, S., Obando, N., Gowdy, A., Karaman, I., & Radovic, M.
(2012).
Long-Term Oxidation of Ti2AlC in Air andWater Vapor at 1000-1300 degrees C Temperature Range. Journal of the Electrochemical Society.
159(2), C90-C96.
-
Hu, L., Benitez, R., Basu, S., Karaman, I., & Radovic, M.
(2012).
Processing and characterization of porous Ti2AlC with controlled porosity and pore size. ACTA MATERIALIA.
60(18), 6266-6277.
-
Gudlur, P., Forness, A., Lentz, J., Radovic, M., & Muliana, A.
(2012).
Thermal and mechanical properties of Al/Al2O3 composites at elevated temperatures. Materials Science & Engineering: A.
531, 18-27.
-
Arroyave, R., & Radovic, M.
(2011).
Ab initio investigation of Ti2Al(C,N) solid solutions. Physical review B (PRB).
84(13), 134112.
-
Pham, H. H., Williams, M. E., Mahaffey, P., Radovic, M., Arroyave, R., & Cagin, T.
(2011).
Finite-temperature elasticity of fcc Al: Atomistic simulations and ultrasonic measurements. Physical review B (PRB).
84(6), 064101.
-
Spencer, C. B., Cordoba, J. M., Obando, N. H., Radovic, M., Oden, M., Hultman, L., & Barsoum, M. W.
(2011).
The Reactivity of Ti2AlC and Ti3SiC2 with SiC Fibers and Powders up to Temperatures of 1550 degrees C. 94(6), 1737-1743.
-
Flynn, K., & Radovic, M.
(2011).
Evaluation of defects in materials using resonant ultrasound spectroscopy. Journal of Materials Science.
46(8), 2548-2556.
-
Barsoum, M. W., & Radovic, M.
(2011).
Elastic and Mechanical Properties of the MAX Phases. Annual Review of Materials Research.
41(1), 195-227.
-
Spencer, C. B., Cordoba, J. M., Obando, N., Sakulich, A., Radovic, M., Oden, M., Hultman, L., & Barsoum, M. W.
(2011).
Phase Evaluation in Al2O3 Fiber-Reinforced Ti2AlC During Sintering in the 1300 degrees C-1500 degrees C Temperature Range. Journal of The American Ceramic Society.
94(10), 3327-3334.
-
Basu, S., Ozaydin, M. F., Kothalkar, A., Karaman, I., & Radovic, M.
(2011).
Phase and morphology evolution in high-temperature Ti3SiC2-NiTi diffusion-bonded joints. Scripta Materialia.
65(3), 237-240.
-
Adamczak, A. D., Spriggs, A. A., Fitch, D. M., Radovic, M., & Grunlan, J. C.
(2010).
Low-Temperature Formation of Ultra-High-Temperature Transition Metal Carbides from Salt-Polymer Precursors. Journal of The American Ceramic Society.
93(8), 2222-2228.
-
Barcelo, F., Doriot, S., Cozzika, T., Le Flem, M., Bechade, J. L., Radovic, M., & Barsoum, M. W.
(2009).
Electron-backscattered diffraction and transmission electron microscopy study of post-creep Ti3SiC2. Journal of Alloys and Compounds.
488(1), 181-189.
-
Orlovskaya, N., Lugovy, M., Carpenter, C., Pathak, S., Steinmetz, D., Lara-Curzio, E., Klemenz, C., & Radovic, M.
(2009).
On thermal and vibrational properties of LaGaO3 single crystals. ACTA MATERIALIA.
57(10), 2984-2992.
-
Basu, S., Radovic, M., & Barsoum, M. W.
(2008).
Room temperature constant-stress creep of a brittle solid studied by spherical nanoindentation. Journal of Applied Physics.
104(6), 063522.
-
Radovic, M., Ganguly, A., & Barsoum, M. W.
(2008).
Elastic properties and phonon conductivities of Ti3Al(C-0.5,N-0.5) and Ti2Al(C-0.5,N-0.5) solid solutions. 23(6), 1517-1521.
-
Orlovskaya, N., Lugovy, M., Pathak, S., Steinmetz, D., Lloyd, J., Fegely, L., ... Kuebler, J.
(2008).
Thermal and mechanical properties of LaCoO3 and La0.8Ca0.2CoO3 perovskites. Journal of Power Sources.
182(1), 230-239.
-
Radovic, M., Speakman, S. A., Allard, L. F., Payzant, E. A., Lara-Curzio, E., Kriven, W. M., ... Orlovskaya, N.
(2008).
Thermal, mechanical and phase stability of LaCoO3 in reducing and oxidizing environments. Journal of Power Sources.
184(1), 77-83.
-
Byeon, J. W., Liu, J., Hopkins, M., Fischer, W., Garimella, N., Park, K. B., ... Sohn, Y. H.
(2007).
Microstructure and residual stress of alumina scale formed on Ti2AlC at high temperature in air. Oxidation of Metals.
68(1-2), 97-111.
-
Radovic, M., Barsoum, M. W., Ganguly, A., Zhen, T., Finkel, P., Kalidindi, S. R., & Lara-Curzio, E.
(2006).
On the elastic properties and mechanical damping of Ti3SiC2, Ti3GeC2, Ti3Si0.5Al0.5C2 and Ti2AlC in the 3001573K temperature range. ACTA MATERIALIA.
54(10), 2757-2767.
-
Barsoum, M. W., Radovic, M., Zhen, T., Finkel, P., & Kalidindi, S. R.
(2005).
Dynamic elastic hysteretic solids and dislocations. Physical Review Letters.
94(8), 085501.
-
Zhen, T., Barsoum, M. W., Kalidindi, S. R., Radovic, M., Sun, Z. M., & El-Raghy, T.
(2005).
Compressive creep of fine and coarse-grained T3SiC2 in air in the 11001300C temperature range. ACTA MATERIALIA.
53(19), 4963-4973.
-
Khanna, S. K., Long, X., Porter, W. D., Wang, H., Liu, C. K., Radovic, M., & Lara-Curzio, E.
(2005).
Residual stresses in spot welded new generation aluminium alloys Part A thermophysical and thermomechanical properties of 6111 and 5754 aluminium alloys. Science and Technology of Welding and Joining.
10(1), 82-87.
-
Radovic, M., Lara-Curzio, E., & Riester, L.
(2004).
Comparison of different experimental techniques for determination of elastic properties of solids. Materials Science & Engineering: A.
368(1-2), 56-70.
-
Radovic, M., & LaraCurzio, E.
(2004).
Elastic Properties of NickelBased Anodes for Solid Oxide Fuel Cells as a Function of the Fraction of Reduced NiO. Journal of The American Ceramic Society.
87(12), 2242-2246.
-
Radovic, M., & Lara-Curzio, E.
(2004).
Mechanical properties of tape cast nickel-based anode materials for solid oxide fuel cells before and after reduction in hydrogen. ACTA MATERIALIA.
52(20), 5747-5756.
-
Murugaiah, A., Souchet, A., ElRaghy, T., Radovic, M., Sundberg, M., & Barsoum, M. W.
(2004).
Tape Casting, Pressureless Sintering, and Grain Growth in Ti3SiC2 Compacts. Journal of The American Ceramic Society.
87(4), 550-556.
-
Barsoum, M. W., Ho-Duc, L. H., Radovic, M., & El-Raghy, T.
(2003).
Long Time Oxidation Study of Ti3SiC2 , Ti3SiC2 / SiC , and Ti3SiC2 / TiC Composites in Air. Journal of the Electrochemical Society.
150(4), b166-b175.
-
Barsoum, M. W., Zhen, T., Kalidindi, S. R., Radovic, M., & Murugaiah, A.
(2003).
Fully reversible, dislocation-based compressive deformation of Ti3SiC2 to 1 GPa. Nature Materials.
2(2), 107-111.
-
Radovic, M., Barsoum, M. W., El-Raghy, T., & Wiederhorn, S. M.
(2003).
Tensile creep of coarse-grained Ti3SiC2 in the 10001200C temperature range. Journal of Alloys and Compounds.
361(1-2), 299-312.
-
Radovic, M., Barsoum, M. W., El-Raghy, T., Wiederhorn, S. M., & Luecke, W. E.
(2002).
Effect of temperature, strain rate and grain size on the mechanical response of Ti3SiC2 in tension. ACTA MATERIALIA.
50(6), 1297-1306.
-
Barsoum, M. W., Radovic, M., Finkel, P., & El-Raghy, T.
(2001).
Ti3SiC2 and ice. Applied Physics Letters.
79(4), 479-481.
-
Radovic, M., Barsoum, M. W., El-Raghy, T., & Wiederhorn, S.
(2001).
Tensile creep of fine grained (35 m) Ti3SiC2 in the 10001200C temperature range. ACTA MATERIALIA.
49(19), 4103-4112.
-
Barsoum, M. W., El-Raghy, T., & Radovic, M.
(2000).
Ti
3 SiC2 : A layered machinable ductile carbide. Interceram. 49(4), 226-233.
-
Radovic, M., Barsoum, M. W., El-Raghy, T., Seidensticker, J., & Wiederhorn, S.
(2000).
Tensile properties of Ti3SiC2 in the 251300C temperature range. ACTA MATERIALIA.
48(2), 453-459.
-
Vol'demarov, O. V., Sijacki-Zeravcic, V., Dzioba, I. R., Radovic, M., & Kovacevic, E.
(1997).
Evaluation of the structural degradation and damage of steel of steam pipelines subjected to the long-term action of thermomechanical factors. Materials Science.
33(2), 232-237.
-
Milanovi, D., ijaki-eravi, V., Markovi, A., & Radovi, M.
(1995).
Assessment of the residual life of a pipeline bend by metallographic measurements of cavitation damageDetermination of the A-parameter. Materials Science.
30(5), 589-597.
-
Rathod, H. J., Ouisse, T., Radovic, M., & Srivastava, A.
(2021).
Room temperature crack-healing in an atomically layered ternary carbide. Science Advances.
7(33), eabg2549.
-
chapter
-
Bakic, G. M., Djukic, M. B., Rajicic, B., Zeravcic, V. S., Maslarevic, A., Radovic, M., Maksimovic, V., & Milosevic, N.
(2017).
Characterization of Tube Repair Weld in Thermal Power Plant Made of a 12% Cr Tempered Martensite Ferritic Steel. Lecture Notes in Mechanical Engineering.
Pluvinage, G., & Milovic, L. (Eds.),
Fracture at all Scales.
(pp. 151-169).
Springer Nature.
-
Parrikar, P. N., Benitez, R., Radovic, M., & Shukla, A.
(2017).
Effect of Microstructure on Mechanical Response of MAX Phases. Conference Proceedings of the Society for Experimental Mechanics Series.
Ralph, W. C., Singh, R., Tandon, G., Thakre, P. R., Zavattieri, P., & Zhu, Y. (Eds.),
Mechanics of Composite and Multi-functional Materials, Volume 7.
(pp. 171-175).
Springer Nature.
-
Lara-Curzio, E., Radovic, M., & Luttrell, C. R.
(2016).
APPLICABILITY OF PROBABILISTIC ANALYSES TO ASSESS THE STRUCTURAL RELIABILITY OF MATERIALS AND COMPONENTS FOR SOLID-OXIDE FUEL CELLS. ENGINEERED CERAMICS: CURRENT STATUS AND FUTURE PROSPECTS.
(pp. 46-58).
Wiley.
-
Kar, P., Kundu, S., Radovic, M., & Liang, H.
(2011).
Tribofilm Formation using Ti2 AIC Material. Ceramic Transactions Series.
(pp. 185-193).
John Wiley & Sons, Inc..
-
Lu, K., Manjooran, N., Radovic, M., Medvedovski, E., Olevsky, E. A., Li, C., ... Pickrell, G.
(2011).
Ceramic Transactions: Preface. Ceramic Transactions.
-
Lu, K., Manjooran, N., Radovic, M., Medvedovski, E., Olevsky, E. A., Li, C., ... Pickrell, G.
(2011).
Advances in Nanomaterials and Nanostructures. Lu, K., Manjooran, N., Radovic, M., Medvedovski, E., Olevsky, E. A., Li, C., ... Pickrell, G. (Eds.),
(pp. ix-x).
John Wiley & Sons, Inc..
-
Barsoum, M. W., & Radovic, M.
(2004).
Mechanical Properties of the MAX Phases. Cahn, R. W., Flemings, M. C., Ilschner, B., Kramer, E. J., Mahajan, S., & Veyssière, P. (Eds.),
Encyclopedia of Materials: Science and Technology.
(pp. 1-16).
Elsevier.
-
Bakic, G. M., Djukic, M. B., Rajicic, B., Zeravcic, V. S., Maslarevic, A., Radovic, M., Maksimovic, V., & Milosevic, N.
(2017).
Characterization of Tube Repair Weld in Thermal Power Plant Made of a 12% Cr Tempered Martensite Ferritic Steel. Lecture Notes in Mechanical Engineering.
Pluvinage, G., & Milovic, L. (Eds.),
Fracture at all Scales.
(pp. 151-169).
Springer Nature.
-
conference paper
-
Lutkenhaus, J., Radovic, M., Green, M., & An, H.
(2019).
Advanced functional layer-by-layer assemblies containing MXenes and polyelectrolytes. ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY.
-
Samuel, R., Huang, O., Banerjee, A., Puppala, A., Das, J., & Radovic, M.
(2019).
Case Study: Use of Geopolymers to Evaluate the Swell-Shrink Behavior of Native Clay in North Texas. Geotechnical Special Publications.
167-178.
-
Habib, T., Shah, S. A., Sun, W., Prehn, E., Tan, Z., Green, M., & Radovic, M.
(2018).
Approach to retard oxidation during processing of colloidal Ti3C2 MXenes. ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY.
-
Sun, W., Green, M., & Radovic, M.
(2018).
Electrochemical etching of Ti2CTx MXene in dilute HCl solution. ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY.
-
Du, W., Ren, X., Chen, Y., Ma, C., Radovic, M., & Pei, Z.
(2018).
MODEL GUIDED MIXING OF CERAMIC POWDERS WITH GRADED PARTICLE SIZES IN BINDER JETTING ADDITIVE MANUFACTURING. v001t01a014-v001t01a014.
-
Shah, S. A., Habib, T., Gao, H., Gao, P., Sun, W., Green, M., & Radovic, M.
(2017).
Template-free 3D titanium carbide (MXene) particles crumpled by capillary forces. ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY.
-
Naik Parrikar, P., Gao, H., Radovic, M., & Shukla, A.
(2015).
Static and Dynamic Thermo-Mechanical Behavior of Ti2AlC MAX Phase and Fiber Reinforced Ti2AlC Composites. Conference Proceedings of the Society for Experimental Mechanics Series.
9-14.
-
Xing, J., Jang, A., Radovic, M., & Muliana, A.
(2013).
Thermal Properties of BaTiO3/Ag Composites Undergoing Phase Transformation Due to Temperature Changes. 1631-1639.
-
Arroyave, R., Radovic, M., & Froyd, J. E.
(2012).
EFFECTS OF STUDENT-LED UNDERGRADUATE RESEARCH EXPERIENCE ON LEARNING AND ATTITUDES TOWARD ENGINEERING IN AN INTRODUCTORYMATERIALS SCIENCE COURSE. ASEE Annual Conference and Exposition, Conference Proceedings.
38-43.
-
Arroyave, R., Radovic, M., & Froyd, J. E.
(2012).
Effects of student-led undergraduate research experience on learning and attitudes toward engineering in an introductory materials science course. ASEE Annual Conference and Exposition, Conference Proceedings.
-
Kar, P., Kundu, S., Radovic, M., & Liang, H.
(2011).
Tribofilm formation using Ti
2 AlC material. Ceramic Transactions. 187-193.
-
Kriven, W. M., Zhu, Y., & Radovic, M.
(2010).
Ceramic Engineering and Science Proceedings: Preface. Ceramic Engineering and Science Proceedings.
-
Lara-Curzio, E., Radovic, M., Trejo, R. M., Cofer, C., Watkins, T. R., & More, K. L.
(2006).
Effect of thermal cycling and thermal aging on the mechanical properties of, and residual stresses in, Ni-YSZ/YSZ bi-layers. Ceramic Engineering and Science Proceedings.
383-391.
-
Radovic, M., Lara-Curzio, E., & Nelson, G.
(2006).
Fracture toughness and slow crack growth behavior of Ni-YSZ and YSZ as a function of porosity and temperature. Ceramic Engineering and Science Proceedings.
373-381.
-
Salem, J. A., Radovic, M., Lara-Curzio, E., & Nelson, G.
(2006).
Fracture toughness of thin plates by the double-torsion test method. Ceramic Engineering and Science Proceedings.
63-73.
-
Radovc, M., Lara-Curzio, E., Trejo, R. M., Wang, H., & Porter, W. D.
(2006).
Thermophysical properties of YSZ and Ni-YSZ as a function of temperature and porosity. Ceramic Engineering and Science Proceedings.
79-85.
-
Radovic, M., Lara-Curzio, E., Armstrong, B., Tortorelli, P., & Walker, L.
(2005).
Effect of hydrogen reduction on the microstructure and elastic properties of Ni-based anodes for SOFCs. Ceramic Transactions.
41-50.
-
Radovic, M., Lara-Curzio, E., Armstrong, B., & Walls, C.
(2005).
Elastic properties, biaxial strength and fracture toughness of nickel-based anode materials for solid oxide fuel cells. Ceramic Transactions.
31-40.
-
Radovic, M., Lara-Curzio, E., Trejo, R., Armstrong, B., & Walls, C.
(2004).
Elastic properties, equibiaxial strength and fracture toughness of 8mol%YSZ electrolyte material for Solid Oxide Fuel Cells (SOFCs). Ceramic Engineering and Science Proceedings.
287-292.
-
Radovic, M., Lara-Curzio, E., & Riester, L.
(2004).
Evaluation of four different experimental techniques for determination of elastic properties of solids. Ceramic Engineering and Science Proceedings.
255-260.
-
Radovic, M., Lara-Curzio, E., Armstrong, B., Walker, L., Tortorelli, P., & Walls, C.
(2004).
Kinetics of the hydrogen reduction of NIO/YSZ and associated microstructural changes. Ceramic Engineering and Science Proceedings.
281-286.
-
Radovic, M., Lara-Curzio, E., Armstrong, B., & Walls, C.
(2003).
Effect of thickness and porosity on the mechanical properties of planar components for solid oxide fuel cells at ambient and elevated temperatures. Ceramic Engineering and Science Proceedings.
329-334.
-
Lutkenhaus, J., Radovic, M., Green, M., & An, H.
(2019).
Advanced functional layer-by-layer assemblies containing MXenes and polyelectrolytes. ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY.
editor of
-
book
-
Lu, K., & Manjooran, N.
(2011).
Advances in Nanomaterials and Nanostructures Ceramic Transactions
Radovic, M. (Eds.),
JOhn Wiley & Sons.
-
Lu, K., & Manjooran, N.
(2011).
Advances in Nanomaterials and Nanostructures Ceramic Transactions
Radovic, M. (Eds.),
JOhn Wiley & Sons.
Research
principal investigator on
- DMREF: Collaborative Research: Accelerated Development of Damage Tolerant and Oxidation Resistant Alumina-Forming MAX Phases awarded by National Science Foundation - (Arlington, Virginia, United States) 2017 - 2021
- MRI: Development of Multi-Field Resonant Ultrasound Spectroscopy awarded by National Science Foundation - (Arlington, Virginia, United States) 2017 - 2020
- Development of Geopolymers Based Cement and soil stabilizers for Transportation Infrastructure awarded by United States Department of Transportation - (Washington D.C., District of Columbia, United States) 2018 - 2019
- Development of Environmentally Friendly Stabilization Methods for Transport Infrastructure Based on Geopolymers awarded by United States Department of Transportation - (Washington D.C., District of Columbia, United States) 2017 - 2018
- FFATA: CAREER: Effects of Anelastic Relaxation of Defect Complexes on the Mechanical Behavior of Oxide Ceramics awarded by National Science Foundation - (Arlington, Virginia, United States) 2011 - 2017
- Collaborative Research: Deformation and Damage Mechanisms in Ternary Carbides and Nitrides Under Dynamic Conditions awarded by National Science Foundation - (Arlington, Virginia, United States) 2012 - 2016
co-principal investigator on
- Tailoring the Composition, Morphology, and Assembly of MXene Nanosheets awarded by National Science Foundation - (Arlington, Virginia, United States) 2018 - 2021
- Multi-Material Bulk Deposition and Characterization System for Accelerated Materials Discovery and Design awarded by United States Air Force - (Arlington, Virginia, United States) 2016 - 2018
- Linking Fundamental Structural and Physical Properties of the MAX Phases at Finite Temperatures through Synergetic Experimental and Computational Research awarded by National Science Foundation - (Arlington, Virginia, United States) 2014 - 2018
- CCLI: Scaling Up Undergraduate Research Experience Through Student-Led Class-Wide Projects in an Introductory Materials Science Course awarded by National Science Foundation - (Arlington, Virginia, United States) 2010 - 2015
- (MURI 09) Synthesis, Characterization and Modeling of Functionally Graded Multifunctional Hybrid Composites for Extreme Environments awarded by United States Air Force - (Arlington, Virginia, United States) 2009 - 2015
investigator on
Teaching
teaching activities
- CHEN322 Chem Engr Materials Instructor
- MEEN485 Directed Studies Instructor
- MEEN491 Hnr-research Instructor
- MEEN684 Professional Internship Instructor
- MEEN684 Professional Internship Instructor
- MEEN685 Directed Studies Instructor
- MEEN691 Research Instructor
- MSEN222 Material Science Instructor
- MSEN222 Materials Science Instructor
- MSEN301 Unified Matls Lab I Instructor
- MSEN410 Materials Processing Instructor
- MSEN458 Fundamentals Of Ceramics Instructor
- MSEN491 Hnr-research Instructor
- MSEN658 Fundamentals Of Ceramics Instructor
- MSEN684 Professional Internship: In-ab Instructor
- MSEN685 Directed Studies Instructor
- MSEN689 Sptp: Materials Processing Instructor
- MSEN691 Research Instructor
Works By Students
chaired theses and dissertations
-
Benitez, Rogelio (2015-07). Effect of Microstructure on the Mechanical Properties of Ti2AlC at Room and High Temperatures.
-
Flynn, Kevin Joseph (2009-05). Defect analysis using resonant ultrasound spectroscopy.
-
Gao, Huili (2016-08). Improving Mechanical Properties of Tin+1-A-Cn (A=Al or Si) Max Phases Through Solid Solution Strengthening and Fiber Reinforcement.
-
Gao, Peipei (2016-08). Anelastic Relaxation and Phase Transformations in Doped Binary Oxides.
-
Gudlur, Pradeep (2013-07). Experimental and Numerical Studies of Aluminum-Alumina Composites.
-
Hu, Liangfa (2015-03). Fabrication and Characterization of Interpenetrating Metal/Ternary Carbide Composites.
-
Jeon, Kwonguk (2012-10). Processing and Mechanical Properties of Ti2AlC Reinforced with Alumina Fibers.
-
Kim, Hyunsoo (2011-10). Mechanical Properties of Sodium and Potassium Activated Metakaolin-Based Geopolymers.
-
Lim, Wendy (2011-02). MECHANICAL PROPERTIES OF Sc0.1Ce0.01Zr0.89O2 ELECTROLYTE MATERIAL FOR INTERMEDIATE TEMPERATURE SOLID OXIDE FUEL CELLS.
-
Lizcano, Maricela (2012-10). Effects of Water Content and Alumino-Silicate Sources on the Structure and Properties of Geopolymers.
-
Manisha, (2008-10). Evaluation of thermal stresses in planar solid oxide fuel cells as a function of thermo-mechanical properties of component materials.
Background
education and training
- Ph.D. in Materials Science and Engineering, Drexel University - (Philadelphia, Pennsylvania, United States) 2001
- M.S. in Mechanical Engineering, University of Belgrade - (Belgrade, Serbia) 1997
- B.S. in Mechanical Engineering, University of Belgrade - (Belgrade, Serbia) 1992
awards and honors
- Dean of Engineering Excellence Award, conferred by Texas A&M University - (College Station, Texas, United States), 2015
- Herbert H. Richardson Fellowship, conferred by Texas A&M University - (College Station, Texas, United States), 2013
- Faculty Early Career Development (CAREER) Program, conferred by National Science Foundation - (Arlington, Virginia, United States), 2011
Contact
first name
- Miladin
has last name
- Radovic
mailing address
-
Texas A&M University
Materials Science & Engineering
3003 TAMU
College Station, TX 77843-3123
USA
Other
- mradovic@tamu.edu