publication venue for
- Compositional effects on strain-controlled actuation fatigue of NiTiHf high temperature shape memory alloys. 242. 2024
- Directly cast fibrous heterostructured FeNi0.9Cr0.5Al0.4 high entropy alloy with low-cost and remarkable tensile properties. 230:115421-115421. 2023
- Fragmentation of the edge of a terminated Cu nanolayer within a Nb matrix upon annealing. 225:115168-115168. 2023
- Engineering thermal hysteresis of ferromagnetic shape memory alloy sensory particles. 213:114619-114619. 2022
- Room Temperature Deformation-induced Solute Segregation and its Impact on Twin Boundary Mobility in a Mg-Y Alloy. 209:114375-114375. 2022
- Entropy-driven melting point depression in fcc HEAs. 208:114336-114336. 2022
- Simultaneous deformation twinning and martensitic transformation in CoCrFeMnNi high entropy alloy at high temperatures. 202:113995-113995. 2021
- High entropy silicides: CALPHAD-guided prediction and thin film fabrication. 201:113914-113914. 2021
- Hybrid diffusive-displacive helium outgassing in Cu/Nb multilayer composites. 194:113706-113706. 2021
- Persistence of crystal orientations across sub-micron-scale "super-grains" in self-organized Cu-W nanocomposites. 194:113677-113677. 2021
- On the non-classical crystallographic slip in Tin+1AlCn MAX phases. 194:113698-113698. 2021
- Cold-workable refractory complex concentrated alloys with tunable microstructure and good room-temperature tensile behavior. 188:16-20. 2020
- The effects of nanoscale confinement on the behavior of metal laminates. 187:130-136. 2020
- Evolution of anisotropic and negative thermal expansion in rolled equiatomic nickel-titanium martensite. 186:142-146. 2020
- Exploring performance limits of a new martensitic high strength steel by ausforming via equal channel angular pressing. 184:63-69. 2020
- Effects of composition on the mechanical properties and negative thermal expansion in martensitic TiNb alloys. 178:351-355. 2020
- Influence of metal nanocomposite morphology on Helium implantation response. 177:229-233. 2020
- Role of cavities on deformation-induced martensitic transformation pathways in a laser-welded, neutron irradiated austenitic stainless steel. 178:1-6. 2020
- The effects of wide range of compositional changes on the martensitic transformation characteristics of NiTiHf shape memory alloys. 161:78-83. 2019
- Influence of Zn on the distribution and composition of heterogeneous solute-rich features in peak aged Al-Mg-Si-Cu alloys. 159:5-8. 2019
- Ultra-high temperature multi-component shape memory alloys. 158:83-87. 2019
- Determination of atomic diffusion coefficient via isochronal spark plasma sintering. 151:47-52. 2018
- Microstructure-mechanical properties correlation in irradiated amorphous SiOC. 146:316-320. 2018
- Observations of explosion phase boron nitride formed by emulsion detonation synthesis. 145:126-130. 2018
- Tensile actuation response of additively manufactured nickel-titanium shape memory alloys. 146:164-168. 2018
- Fcc nanostructured TiFeCoNi alloy with multi-scale grains and enhanced plasticity. 143:108-112. 2018
- Microstructural design considerations in Fe-Mn-Al-Ni shape memory alloy wires: Effects of natural aging. 142:153-157. 2018
- Enhanced thermal stability and ductility in a nanostructured Ni-based alloy. 141:1-5. 2017
- Creep behavior of the solid acid fuel cell material CsHSO4. 139:119-121. 2017
- Influence of powder properties on densification mechanism during spark plasma sintering. 139:96-99. 2017
- Joining of physical vapor-deposited metal nano-layered composites. 139:114-118. 2017
- Thermal stability from calorimetric measurements of multilayered NiFe specimens with different layer thickness. 137:100-103. 2017
- On the deformation response and cyclic stability of Ni50Ti35Hf15 high temperature shape memory alloy wires. 135:92-96. 2017
- Effects of cyclic heat treatment and aging on superelasticity in oligocrystalline Fe-Mn-Al-Ni shape memory alloy wires. 134:66-70. 2017
- Reaction diffusion rate coefficient derivation by isothermal heat treatment in spark plasma sintering system. 134:91-94. 2017
- Bifurcation in deformation behavior of Cu and Ta by accumulative roll-bonding at high temperature. 136:87-91. 2017
- Comments on 'Selective evolution of secondary gamma ' precipitation in a Ni-based single crystal superalloy both in the gamma matrix and at the dislocation nodes'. 129:100-103. 2017
- On the effect of titanium on quenching sensitivity and pseudoelastic response in Fe-Mn-Al-Ni-base shape memory alloy. 126:20-23. 2017
- Effect of grain size on the superelastic response of a FeMnAlNi polycrystalline shape memory alloy. 125:68-72. 2016
- Stability of a Ni-rich Ni-Ti-Zr high temperature shape memory alloy upon low temperature aging and thermal cycling. 124:47-50. 2016
- Unusual reversible twinning modes and giant superelastic strains in FeNiCoAlNb single crystals. 119:43-46. 2016
- Effects of crystallographic orientation on the superelastic response of FeMnAlNi single crystals. 116:147-151. 2016
- Cyclic degradation in bamboo-like Fe-Mn-Al-Ni shape memory alloys - The role of grain orientation. 114:156-160. 2016
- Disordered dislocation configuration in submicrometer Al crystal subjected to plane strain bending. 113:35-38. 2016
- In-situ observation of radiation damage in nano-structured amorphous SiOC/crystalline Fe composite. 113:79-83. 2016
- Pyramidal I slip in c-axis compressed Mg single crystals. 112:75-78. 2016
- Atomic order and martensitic transformation entropy change in Ni-Co-Mn-In metamagnetic shape memory alloys. 110:61-64. 2016
- On the effect of gamma phase formation on the pseudoelastic performance of polycrystalline Fe-Mn-Al-Ni shape memory alloys. 108:23-26. 2015
- Giant elastocaloric effect in directionally solidified Ni-Mn-In magnetic shape memory alloy. 105:42-45. 2015
- Precipitation of AlN in a commercial hot-pressed boron carbide. 101:95-98. 2015
- Superelastic response of the FeNiCoAlTi single crystals under tension and compression. 101:1-4. 2015
- Actuation fatigue life prediction of shape memory alloys under the constant-stress loading condition. 95:58-61. 2015
- Ultrahigh-strength submicron-sized metallic glass wires. 84-85:27-30. 2014
- Microstructural characterization and superelastic response of a Ni50.3Ti29.7Zr20 high-temperature shape memory alloy. 81:12-15. 2014
- Prism stacking faults observed contiguous to a {10-12} twin in a MgY alloy. 76:61-64. 2014
- Spark plasma sintering and mechanical behavior of magnesiayttria (50:50vol.%) nanocomposites. 75:18-21. 2014
- Effect of precipitation on the microstructure and the shape memory response of the Ni50.3Ti29.7Zr20 high temperature shape memory alloy. 69:354-357. 2013
- The effect of clustering on the mobility of dislocations during aging in Nb-microalloyed strip cast steels: In situ heating TEM observations. 69:481-484. 2013
- Field-activated sintering of blended elemental -TiAl powder compacts: Porosity analysis and growth kinetics of Al3Ti. 68:841-844. 2013
- Effect of post-annealing on the electrical conductivity of spark plasma sintered antimony-doped tin oxide (ATO) ceramics. 68:297-300. 2013
- Phase transition, segregation and nanopore formation in high-energy heavy-ion-irradiated metallic glass. 67:887-890. 2012
- The role of thermal spike compactness in radiation-induced disordering and Frenkel pair production in Ni3Al. 67:724-727. 2012
- Effect of aging on the superelastic response of a single crystalline FeNiCoAlTa shape memory alloy. 67:475-478. 2012
- Effect of grain size on prismatic slip in Mg-3Al-1Zn alloy. 67:439-442. 2012
- Twins in cryomilled and spark plasma sintered CuZnAl. 67:245-248. 2012
- Effect of the surface on ion-beam damage build-up in ZnO. 67:65-68. 2012
- Interface-mediated suppression of radiation damage in GaN. 67:205-208. 2012
- Magnetic response of porous NiCoMnSn metamagnetic shape memory alloys fabricated using solid-state replication. 67:116-119. 2012
- Strengthening from Nb-rich clusters in a Nb-microalloyed steel. 66:710-713. 2012
- Deformation field in large-strain extrusion machining and implications for deformation processing. 66:235-238. 2012
- Helium bubble precipitation at dislocation networks. 66:17-20. 2012
- Interface-enhanced defect absorption between epitaxial anatase TiO2 film and single crystal SrTiO3. 65:807-810. 2011
- Work output of the two-way shape memory effect in Ti50.5Ni24.5Pd25 high-temperature shape memory alloy. 65:903-906. 2011
- Influences of surface preparation on nanoindentation pop-in in single-crystal Mo. 65:469-472. 2011
- Determining recoverable and irrecoverable contributions to accumulated strain in a NiTiPd high-temperature shape memory alloy during thermomechanical cycling. 65:123-126. 2011
- Grain size dependence of fracture toughness for fine grained alumina. 65:143-146. 2011
- Compressive flow behavior of Cu thin films and Cu/Nb multilayers containing nanometer-scale helium bubbles. 64:974-977. 2011
- Comparative analysis of the effects of severe plastic deformation and thermomechanical training on the functional stability of Ti50.5Ni24.5Pd25 high-temperature shape memory alloy. 64:315-318. 2011
- Grain growth and dislocation density evolution in a nanocrystalline NiFe alloy induced by high-pressure torsion. 64:327-330. 2011
- Phase and morphology evolution in high-temperature Ti3SiC2-NiTi diffusion-bonded joints. 65:237-240. 2011
- Extended twinning phenomena in Al4%Mg alloys/B4C nanocomposite. 64:133-136. 2011
- Grain refinement vs. crystallographic texture: Mechanical anisotropy in a magnesium alloy. 64:193-196. 2011
- Influence of trace boron addition on the directional solidification characteristics of Ti-6Al-4V. 63:1244-1247. 2010
- Mechanical and shape memory properties of Ni43Co7Mn39Sn11 alloy compacts fabricated by pressureless sintering. 63:1236-1239. 2010
- Grain size and reversible beta-to-omega phase transformation in a Ti alloy. 63:613-616. 2010
- Scratch-induced deformation in fine- and ultrafine-grained bulk alumina. 63:528-531. 2010
- Superelastic memory effect in Ti74Nb26 shape memory alloy. 63:265-268. 2010
- High-temperature superelasticity and competing microstructural mechanisms in Co49Ni21Ga30 shape memory alloy single crystals under tension. 62:368-371. 2010
- Deviation of the magnetization change from the structural phase transition temperature in polycrystalline Ni-Mn-Sn in low magnetic fields. 63:1161-1164. 2010
- The absence of thermal expansion mismatch strengthening in nanostructured metalmatrix composites. 61:1052-1055. 2009
- Effects of Cu ion irradiation in Cu50Zr45Ti5 metallic glass. 61:265-268. 2009
- Electron irradiation-induced structural transformation in metallic glasses. 61:40-43. 2009
- A discussion on the absence of plasma in spark plasma sintering. 60:835-838. 2009
- Synthesis of silicon nitride single-crystalline nanowires by nitriding cryomilled nanocrystalline silicon powder. 60:737-740. 2009
- Enhanced tensile strength and high ductility in cryomilled commercially pure titanium. 60:586-589. 2009
- The role of grain size and distribution on the cyclic stability of titanium. 60:344-347. 2009
- Influence of stacking fault energy on deformation mechanism and dislocation storage capacity in ultrafine-grained materials. 60:52-55. 2009
- A different type of indentation size effect. 59:1095-1098. 2008
- Rate-dependent behavior of hierarchical Al matrix composites. 59:1139-1142. 2008
- Influence of specimen dimensions on the tensile behavior of ultrafine-grained Cu. 59:627-630. 2008
- Shape memory and pseudoelasticity response of NiMnCoIn magnetic shape memory alloy single crystals. 58:815-818. 2008
- Arrest of He bubble growth in CuNb multilayer nanocomposites. 58:541-544. 2008
- Improvement of the fatigue performance of an ultrafine-grained Nb-Zr alloy by nano-sized precipitates formed by internal oxidation. 58:571-574. 2008
- On the cyclic stability of nanocrystalline copper obtained by powder consolidation at room temperature. 58:307-310. 2008
- Compressive strengths of molybdenum alloy micro-pillars prepared using a new technique. 57:397-400. 2007
- Multidimensional contact moduli of elastically anisotropic solids. 57:13-16. 2007
- Microstructure and hardness of spray-formed chromium-containing steel tooling. 55:581-584. 2006
- Nanoscale incipient asperity sliding and interface micro-slip assessed by the measurement of tangential contact stiffness. 55:653-656. 2006
- Pseudoelasticity at elevated temperatures in [001] oriented CO49Ni21Ga30 single crystals under compression. 55:663-666. 2006
- An improved relation for the effective elastic compliance of a film/substrate system during indentation by a flat cylindrical punch. 55:315-318. 2006
- A method to enhance cyclic reversibility of NiTiHf high temperature shape memory alloys. 54:2203-2208. 2006
- Scale dependence of mechanical properties of single crystals under uniform deformation. 54:1937-1941. 2006
- Evolution of Youngs modulus of air plasma sprayed yttria-stabilized zirconia in thermally cycled thermal barrier coatings. 54:1587-1592. 2006
- Effect of strain rate on the ductility of a nanostructured aluminum alloy. 54:1175-1180. 2006
- Statistical aspects of discrete dislocation plasticity. 54:729-733. 2006
- A tri-modal aluminum based composite with super-high strength. 53:481-486. 2005
- Formation of coarse-grained inter-particle regions during hot isostatic pressing of nanocrystalline powder. 53:619-624. 2005
- Deformation behavior of an ultrafine-grained AlMg alloy at different strain rates. 52:929-933. 2005
- Local accumulation of thermally grown oxide in plasma-sprayed thermal barrier coatings with rough top-coat/bond-coat interfaces. 52:905-909. 2005
- Comment on: Dislocation dynamics is chaotic. Authors' reply. 52:425-431. 2005
- Reply to "Comment on 'dislocation dynamics is chaotic"'. 52:429-431. 2005
- Elastic constants of single crystal Cr3Si and CrCr3Si lamellar eutectic composites: a comparison of ultrasonic and nanoindentation measurements. 51:875-879. 2004
- Microstructure and microhardness of cryomilled bulk nanocrystalline Al7.5%Mg alloy consolidated by high pressure torsion. 51:209-214. 2004
- Characterization of oxide scales formed on HVOF NiCrAlY coatings with various oxygen contents introduced during thermal spraying. 51:25-29. 2004
- Thermal stability of 5083 Al synthesized by reactive atomization and deposition. 51:71-76. 2004
- Compressive response of a single crystalline CoNiAl shape memory alloy. 51:261-266. 2004
- Product yield for ECAE processing. 51:373-377. 2004
- Microstructure and mechanical properties of severely deformed powder processed Ti-6Al-4V using equal channel angular extrusion. 49:1021-1027. 2003
- Recoverable stress-induced martensitic transformation in a ferromagnetic CoNiAl alloy. 49:831-836. 2003
- AlMg alloy engineered with bimodal grain size for high strength and increased ductility. 49:297-302. 2003
- Friction stress effects on mode I crack growth predictions. 48:755-759. 2003
- GNDs in nonlocal plasticity theories: lessons from discrete dislocation simulations. 48:127-132. 2003
- Preface to the viewpoint set on: geometrically necessary dislocations and size dependent plasticity. 48:109-111. 2003
- A mechanistic description of combined hardening and size effects. 47:343-348. 2002
- Microstructures and strength of nanoscale CuAg multilayers. 46:593-598. 2002
- Dislocation dynamics is chaotic. 45:1047-1053. 2001
- The effect of casting method and heat treating condition on cold workability of high-Si electrical steel. 45:725-731. 2001
- Creep properties of ball-milled and HIPed pure tantalum. 45:447-454. 2001
- Grain growth kinetics of a mechanically milled nanocrystalline Al. 44:2013-2017. 2001
- Deformation of FeNiCoTi shape memory single crystals. 44:779-784. 2001
- A preliminary creep study of a bulk nanocrystalline Al-Mg alloy. 41:743-748. 1999
- Microstructural evolution during the initial stages of spray atomization and deposition. 41:535-540. 1999
- Oscillatory crack growth in glass. 41:275-281. 1999
- Grain growth in reactive spray deposited 5083 alloys. 40:145-151. 1998
- The role of coherent precipitates in martensitic transformations in single crystal and polycrystalline Ti-50.8at%Ni. 39:699-705. 1998
- Structure and mechanical properties of Cu-X (X = Nb,Cr,Ni) nanolayered composites. 39:555-560. 1998
- On the deformation mechanisms in single crystal Hadfield manganese steels. 38:1009-1015. 1998
- Microstructure and properties of spray deposited high Li Al-Li-Mg-Ge-Zr alloys. 37:265-270. 1997
- The effect of heat transfer coefficient on thermal residual stresses in spray deposited materials. 36:283-290. 1997
- The effect of ceramic reinforcement on residual stresses during spray atomization and Co-deposition of metal matrix composites. 34:1911-1918. 1996
- Superplasticity of 5083 alloys produced by spray deposition. 34:1243-1249. 1996
- Thermal residual stresses in spray atomized and deposited Ni3Al. 34:527-536. 1996
- Microstructure-mechanical properties correlation in irradiated amorphous SiOC. 146:316-320.