Journal of Materials Research
Journal
-
- Overview
-
- Identity
-
- View All
-
Overview
publication venue for
-
Automated deposition and Joule heating of carbon ink for the generation of on-demand unique thermal patterns.
38:2137-2144.
2023
-
Advances in the measurement of hardness at high strain rates by nanoindentation.
38:1163-1177.
2023
-
Fe-57 Mossbauer Spectrometry to explore natural and artificial nanostructures.
38:925-936.
2023
-
Insight into photocatalytic behavior of magnesium ferrite-bentonite nanocomposite for the degradation of organic contaminants.
38:990-1006.
2023
-
Structural, magnetic, and photocatalytic properties of core-shell reversal nanocomposites of titanium-doped strontium ferrite and silica.
38:1019-1034.
2023
-
Nucleation and growth behavior of multicomponent secondary phases in entropy-stabilized oxides.
38:198-214.
2023
-
Molybdenum oxide nanoporous asymmetric membranes for high-capacity lithium ion battery anode (Aug, 10.1557/s43578-021-00347-7, 2021).
37:2225-2225.
2022
-
Correction to: Growth of nanoporous high-entropy oxide thin films by pulsed laser deposition.
37:1018-1018.
2022
-
Growth of nanoporous high-entropy oxide thin films by pulsed laser deposition.
37:124-135.
2022
-
Synthesis and behavior of bulk iron nitride soft magnets via high-pressure spark plasma sintering.
37:380-389.
2022
-
Insight into photocatalytic behavior of magnesium ferrite-bentonite nanocomposite for the degradation of organic contaminants
2022
-
Nanomechanical and nanoscratch behavior of oxides formed on inconel 617 at 950 degrees C.
37:580-594.
2022
-
Microstructure, mechanical properties, and ionic conductivity of a solid-state electrolyte prepared using binderless laser powder bed fusion.
36:4565-4577.
2021
-
Mobility inference of the Cahn-Hilliard equation from a model experiment.
36:2830-2842.
2021
-
Quantifying surface deformation around micrometer-scale indents by digital image correlation.
36:2277-2290.
2021
-
Current trends in nanomechanical testing research.
36:2133-2136.
2021
-
Quantitative insights into the dislocation source behavior of twin boundaries suggest a new dislocation source mechanism.
36:2037-2046.
2021
-
On the effective load during nanoindentation creep testing with continuous stiffness measurement (CSM).
36:1740-1750.
2021
-
Layer-by-layer assembly of polymers and anisotropic nanomaterials using spray-based approach.
35:1163-1172.
2020
-
Critical issues in conducting constant strain rate nanoindentation tests at higher strain rates.
34:3495-3503.
2019
-
A novel and facile way to synthesize diamondoids nanowire cluster array.
34:2976-2982.
2019
-
Anomalous size effects in nanoporous materials induced by high surface energies.
34:2337-2346.
2019
-
In situ transmission electron microscopy investigation on c + a slip in Mg.
34:1499-1508.
2019
-
Revealing deformation mechanisms in MgY alloy by in situ deformation of nano-pillars with mediated lateral stiffness.
34:1542-1554.
2019
-
2D AlB2 flakes for epitaxial thin film growth.
33:2318-2326.
2018
-
Equal channel angular extrusion for bulk processing of Fe-Co-2V soft magnetic alloys, part I: Processing and mechanical properties.
33:2168-2175.
2018
-
Equal channel angular extrusion for bulk processing of Fe-Co-2V soft magnetic alloys, part II: Texture analysis and magnetic properties.
33:2176-2188.
2018
-
Influence of heat treatment on microstructure, mechanical behavior, and soft magnetic properties in an fcc-based Fe29Co28Ni29Cu7Ti7 high-entropy alloy.
33:2214-2222.
2018
-
Nanoindentation of compliant materials using Berkovich tips and flat tips.
32:435-450.
2017
-
Stabilizing new bismuth compounds in thin film form.
31:3530-3537.
2016
-
Density modulated nanoporous tungsten thin films and their nanomechanical properties.
31:2011-2024.
2016
-
Repair of dentin defects from DSPP knockout mice by PILP mineralization..
31:321-327.
2016
-
Nano-TiB2 reinforced ultrafine-grained pure Al produced by flux-assisted synthesis and asymmetrical rolling.
29:2514-2524.
2014
-
Microstructural evolution of cryomilled Ti/Al mixture during high-pressure torsion.
29:578-585.
2014
-
Irradiation damage of single crystal, coarse-grained, and nanograined copper under helium bombardment at 450 C.
28:2763-2770.
2013
-
Influence of porosity on the transport properties of Bi2Te3-based alloys by field-assisted sintering.
28:1853-1861.
2013
-
Catalytic influence of Ni-based additives on the dehydrogenation properties of ball milled MgH2.
26:2725-2734.
2011
-
The influence of 3 twin boundaries on the formation of radiation-induced defect clusters in nanotwinned Cu.
26:1666-1675.
2011
-
Hybrid nanocomposite coatings for corrosion protection of low carbon steel: A substrate-integrated and scalable activepassive approach.
26:837-844.
2011
-
Coupling thermodynamics and digital image models to simulate hydration and microstructure development of portland cement pastes.
26:609-622.
2011
-
Thermoelectric and transport properties of nanostructured Bi2Te3 by spark plasma sintering.
26:475-484.
2011
-
Plastic instability in amorphous selenium near its glass transition temperature.
25:1015-1019.
2010
-
Measuring the elastic modulus and residual stress of freestanding thin films using nanoindentation techniques.
24:2974-2985.
2009
-
Critical issues in making small-depth mechanical property measurements by nanoindentation with continuous stiffness measurement.
24:653-666.
2009
-
Introduction.
24:579-580.
2009
-
Measuring the constitutive behavior of viscoelastic solids in the time and frequency domain using flat punch nanoindentation.
24:626-637.
2009
-
Relationship between scratch hardness and yield strength of elastic perfectly plastic materials using finite element analysis.
23:2229-2237.
2008
-
A correction to the nanoindentation technique for ultrashallow indenting depths.
22:2359-2362.
2007
-
Corrosion resistance of thermally sprayed high-boron iron-based amorphous-metal coatings: Fe49.7Cr17.7Mn1.9Mo7.4W1.6B15.2C3.8Si2.4.
22:2297-2311.
2007
-
Biomimetic study of a polymeric composite material for joint repair applications.
22:1632-1639.
2007
-
Contact area and size effects in discrete dislocation modeling of wedge indentation.
22:655-663.
2007
-
Pulsed laser characterization of multicomponent polymer acoustic and mechanical properties in the sub-GHz regime.
22:719-723.
2007
-
Nanomechanical properties of sub-10 nm carbon film overcoats using the nanoindentation technique.
22:141-151.
2007
-
Shear strength determination using the nanoscratch technique and its application to thin solid films.
21:2304-2313.
2006
-
Structure and optical properties of plasma immersion ion processed boron-alloyed diamondlike carbon films.
21:1451-1459.
2006
-
Piezoelectric nanoindentation.
21:552-556.
2006
-
Effects of sub-angstrom (pico-scale) structure of surfaces on adhesion, friction, and bulk mechanical properties.
20:1952-1972.
2005
-
Microstructural Evolution of an Ultrafine-grained Cryomilled Al 5083 Alloy During Thermomechanical Processing.
20:2117-2126.
2005
-
Reconciliation of nanoscratch hardness with nanoindentation hardness including the effects of interface shear stress.
19:3316-3323.
2004
-
Microstructural characteristics of oxides in 5083 Al synthesized by reactive atomization and deposition.
19:3090-3098.
2004
-
Microstructural refinement and deformation twinning during severe plastic deformation of 316L stainless steel at high temperatures.
19:2268-2278.
2004
-
Critical factors that determine face-centered cubic to body-centered cubic phase transformation in sputter-deposited austenitic stainless steel films.
19:1696-1702.
2004
-
Effects of substrate on determination of hardness of thin films by nanoscratch and nanoindentation techniques.
19:1791-1802.
2004
-
Relaxation of thermal stress by dislocation motion in passivated metal interconnects.
19:1216-1226.
2004
-
Deformation microstructure under microindents in single-crystal Cu using three-dimensional x-ray structural microscopy.
19:66-72.
2004
-
Fundamentals and applications of instrumented indentation in multidisciplinary research.
19:1-2.
2004
-
Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology.
19:3-20.
2004
-
Nanoindentation creep of quartz, with implications for rate- and state-variable friction laws relevant to earthquake mechanics.
19:357-365.
2004
-
Rapid structural and chemical characterization of ternary phase diagrams using synchrotron radiation.
18:2522-2527.
2003
-
Structural, magnetic, and transport properties of pulsed-laser deposition La0.65Ca0.35MnO3 films grown under different substrate arrangements in the laser plume.
18:2406-2414.
2003
-
Determination of hardness from nanoscratch experiments: Corrections for interfacial shear stress and elastic recovery.
18:2150-2162.
2003
-
Mechanical properties of blended single-wall carbon nanotube composites.
18:1849-1853.
2003
-
Strengthening mechanisms in nanostructured copper/304 stainless steel multilayers.
18:1600-1606.
2003
-
A method for making substrate-independent hardness measurements of soft metallic films on hard substrates by nanoindentation.
18:1383-1391.
2003
-
Decomposition and thermodynamic property of metastable FeZn solid solutions produced by mechanical alloying.
17:3230-3236.
2002
-
Understanding nanoindentation unloading curves.
17:2660-2671.
2002
-
Microstructural Evolution in Nanocrystalline Ni Coatings.
17:1041-1049.
2002
-
Numerical Analyses of Fluid Dynamics of an Atomization Configuration.
17:156-166.
2002
-
Thermal Stability and Wetting Properties of CrOC Coatingssynthesized by Plasma Immersion Ion Processing.
17:14-19.
2002
-
High grain size stability of nanocrystalline Al prepared by mechanical attrition.
16:3451-3458.
2001
-
Development of nanocrystalline structure during cryomilling of Inconel 625.
16:2724-2732.
2001
-
Measurement of residual stress by load and depth sensing indentation with spherical indenters.
16:2091-2102.
2001
-
Grain growth behavior of a nanostructured 5083 AlMg alloy.
16:938-944.
2001
-
Thermal stability of nanocrystalline WCCo powder synthesized by using mechanical milling at low temperature.
16:478-488.
2001
-
Creep behavior of a cryomilled ultrafine-grained Al4% Mg alloy.
15:2215-2222.
2000
-
In situ Temperature Measurement During Spray Forming of A2-tool Steel and Axisymmetric Two-dimensional Analysis.
15:1669-1678.
2000
-
Erratum: Electrical and mechanical property transitions in carbon-filled poly(vinylpyrrolidone) (Journal of Materials Research (1999) 14 (4132)).
15:1226.
2000
-
Residual stresses in polycrystalline Cu/Cr multilayered thin films.
15:756-763.
2000
-
Effects of bonding structure on the properties of plasma immersion ion processed diamondlike carbon films.
15:564-571.
2000
-
High-temperature stability of epitaxial, non-isostructural Mo/NbN superlattices.
15:554-559.
2000
-
Electrical and mechanical property transitions in carbon-filled poly(vinylpyrrolidone) (vol 14, pg 4132, 1999).
15:1226-1226.
2000
-
Evolution of tensile residual stress in thin metal films during energetic particle deposition.
14:4466-4469.
1999
-
Residual stresses in spray-formed A2 tool steel.
14:4521-4530.
1999
-
Surface modification of aluminum and chromium by ion implantation of nitrogen with a high current density ion implanter and plasma-source ion implantation.
14:4351-4357.
1999
-
The boron oxide-boric acid system: Nanoscale mechanical and wear properties.
14:3455-3466.
1999
-
Effect of secondary phase particles on postrecrystallization grain growth in reactive spray deposited 5083 Al alloys.
14:2814-2823.
1999
-
A critical examination of the fundamental relations used in the analysis of nanoindentation data.
14:2296-2305.
1999
-
Fracture toughness of diamondlike carbon coatings.
14:2173-2180.
1999
-
Structure and optical properties of diamondlike carbon synthesized by plasma immersion ion processing.
14:2080-2087.
1999
-
Synthesis of Fe-rich FeAl nanocrystalline solid solutions using ball milling.
14:1760-1770.
1999
-
Microstructural characterization and solidification behavior of atomized AlFe powders.
14:729-736.
1999
-
Haasen plot analysis of the HallPetch effect in Cu/Nb nanolayer composites.
14:407-417.
1999
-
On the applicability of the x-ray diffraction line profile analysis in extracting grain size and microstrain in nanocrystalline materials.
14:549-559.
1999
-
Substrate effects on nanoindentation mechanical property measurement of soft films on hard substrates.
14:292-301.
1999
-
Radiation effects in crystalline ceramics for the immobilization of high-level nuclear waste and plutonium.
13:1434-1484.
1998
-
Influences of pileup on the measurement of mechanical properties by load and depth sensing indentation techniques.
13:1049-1058.
1998
-
Oxidation of MoSi2/SiC nanolayered composite.
13:965-973.
1998
-
Observations of Dislocations in Cu/Nb Nanolayer Composites After Deformation.
12:1939-1941.
1997
-
Radiation-induced phase transformations in MgAl2O4 spinel.
12:1766-1770.
1997
-
Formation kinetics of nanocrystalline Fe4 wt.% Al solid solution during ball milling.
12:1429-1432.
1997
-
Synthesis and characterization of the inorganic ion exchanger based on titanium 2-carboxvethvlphosphonate.
12:1122-1130.
1997
-
Development of a submicrometer-grained microstructure in aluminum 6061 using equal channel angular extrusion.
12:1253-1261.
1997
-
Synthesis and characterization of a novel layered titanium phosphate.
11:2490-2498.
1996
-
Influences of stress on the measurement of mechanical properties using nanoindentation: Part I. Experimental studies in an aluminum alloy.
11:752-759.
1996
-
Influences of stress on the measurement of mechanical properties using nanoindentation: Part II. Finite element simulations.
11:760-768.
1996
-
On the elastic moduli of nanocrystalline Fe, Cu, Ni, and CuNi alloys prepared by mechanical milling/alloying.
10:2892-2896.
1995
-
Tribology and mechanical properties of excimer laser-processed TiSi3N4 surfaces.
10:1857-1860.
1995
-
CRYSTAL-GROWTH, MORPHOLOGY, STRUCTURE, AND PROPERTIES OF HNAMP2O7 CRYSTALS WHERE M=CO AND NI.
9:1519-1525.
1994
-
Elevated temperature mechanical behavior of CoSi and particulate reinforced CoSi produced by spray atomization and co-deposition.
9:362-371.
1994
-
Diamond/Al metal matrix composites formed by the pressureless metal infiltration process.
8:1169-1173.
1993
-
Mechanical properties and microstructures of metal/ceramic microlaminates: Part II. A Mo/Al2O3 system.
7:2774-2784.
1992
-
Electrical resistance of metallic contacts on silicon and germanium during indentation.
7:961-972.
1992
-
On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation.
7:613-617.
1992
-
Deformation of an extruded nickel beryllide between room temperature and 820 C.
6:2653-2659.
1991
-
Ion beam mixing of U-based bilayers.
6:1175-1187.
1991
-
New evidence for a pressure-induced phase transformation during the indentation of silicon.
6:1129-1130.
1991
-
Post deposition excimer laser processing of MoSx thin films.
6:1350-1357.
1991
-
Tribology and mechanical properties of excimer laser mixed TiSiC surface alloys.
6:146-151.
1991
-
Crystal-to-amorphous transformation of NiTi induced by cold rolling.
5:1414-1418.
1990
-
Microstructure and tribology of laser mixed Fe/Ti/C multilayered films on AISI 304 stainless steel.
5:1207-1214.
1990
-
Instrumentation of a conventional hardness tester for load-displacement measurement during indentation.
5:847-851.
1990
-
THE MECHANISM OF HYDROLYTIC POLYMERIZATION OF ZIRCONYL SOLUTIONS.
5:161-162.
1990
-
The formation of amorphous NiB by solid state and ion-beam reaction.
4:1303-1306.
1989
-
Fractal geometry of collision cascades.
4:137-143.
1989
-
Nanoindentation of silver-relations between hardness and dislocation structure.
4:94-101.
1989
-
Effect of excimer laser alloying of Ti on the sliding friction of AISI 304 stainless steel.
3:1104-1107.
1988
-
Friction and wear studies in N-implanted Al2O3, SiC, TiB2, and B4C ceramics.
3:1127-1133.
1988
-
Surface mechanical properties of C implanted Ni.
3:226-232.
1988
-
Fabrication of oxide superconductors from multilayered metallic thin films.
2:726-731.
1987
-
Chemical reactions at the Au/InP interface.
1:820-826.
1986
-
Chemical reactions at the Au/InP interface.
1:820-826.
1986
-
The growth of AuGa2 thin films on GaAs(001) to form chemically unreactive interfaces.
1:537-542.
1986
-
Stability and formation of NiAl3 under ion irradiation.
1:268-274.
1986
-
The quasicrystalline transformation in the AlCr system.
1:237-242.
1986
Identity
International Standard Serial Number (ISSN)
