publication venue for
- Detailed film cooling measurements on a cylindrical model with simulated TBC spallation. 357:69-76. 1998
- Effect of channel orientation on local heat (mass) transfer distributions in a rotating two-pass square channel with smooth walls. 357:141-147. 1998
- Local heat (mass) transfer in a diagonally-oriented rotating two-pass channel with rib-roughened walls. 357:151-157. 1998
- Local heat (mass) transfer in a rotating square channel with ejection holes. 357:49-54. 1998
- Detailed heat transfer coefficient distributions under an array of impinging jets with coolant extraction. 333:143-150. 1996
- Detailed heat transfer distributions in two-pass smooth and turbulated square channels with bleed holes. 330:133-140. 1996
- Local heat transfer distributions in a square channel with solid and perforated ribs on two opposite walls. 333:37-43. 1996
- Effect of model orientation on local heat transfer in a rotating two-pass smooth triangular duct. 300:147-153. 1994
- Effect of Superposition on Spanwise Film-Cooling Effectiveness Distribution on a Gas Turbine Blade 2006
- Experimental Mapping of Local Heat Transfer Coefficients Under Multiple Piezoelectric Fans 2006
- Film Cooling Effectiveness Distributions on a Turbine Blade Cascade Platform With Stator-Rotor Purge and Discrete Film Hole Flows 2006
- Micro-machined temperature sensor arrays for studying micro-scale features in film boiling 2005
- Assessment of steady state PSP and transient IR measurement techniques for leading edge film cooling 2005
- Use of differential scanning calorimetry and X-ray diffraction as experimental tools to understand how nucleating agent concentration affects supercooling in microencapsulated phase change materials 2005
- Film Cooling Effectiveness on the Leading Edge of a Rotating Turbine Blade 2004
- Numerical Prediction of Film Cooling and Heat Transfer on the Leading Edge of a Rotating Blade in a 1-1/2 Turbine Stage 2004
- Heat Transfer in Two-Pass Rotating Rectangular Channels (AR=2:1) With Discrete V-Shaped and Discrete Angled Rib Turbulators 2004
- Heat Transfer in Water-Cooled Silicon Carbide Milli-Channel Heat Sinks for High Power Electronic Applications 2003
- Computational Heat Transfer: Introduction 2003
- Influence of Entrance Geometry on Heat Transfer in Narrow Rectangular Cooling Channels (AR = 4:1) With Angled Ribs 2003
- An Experimental Study of Local Heat Transfer Distribution Between Blockages With Holes in a Rectangular Channel 2002
- Experiments on Effect of Jet Impingement on Heat Transfer in Annular Channels With Parallel and Counter Flows 2002
- Heat Transfer Coefficient on the Squealer Tip and Near Squealer Tip Regions of a Gas Turbine Blade 2002
- Nanoscale Quantitative Thermal Imaging of Electronic Devices 2002
- The Onset of Gas Entrainment From a Stratified Two-Phase Region Through a Single Side-Oriented Branch 2002
- Thermal Property Measurements of Nanotubes, Nanowires, and Nanobelts 2002
- Multiphase flows in industrial applications : Introduction 2001
- Effect of Squealer Geometry Arrangement on Gas Turbine Blade Tip Heat Transfer 2001
- Experimental Study of the Transient Turbulence Generated by a Bubble Using PIV 1999
- Computation of Discrete-Hole Film Cooling by a Near-Wall Second-Moment Turbulence Closure 1999
- Detailed film cooling measurements over a gas turbine blade using a transient liquid crystal image technique 1997
- Simultaneous velocity component measurements of two-phase flows 1997
- Liftoff and Blow Off Characteristics of Laminar Non-Premixed Planar Jets 1997
- Effect of unsteady wake with trailing edge coolant ejection on detailed heat transfer coefficient distributions for a gas turbine blade 1996
- Experimental Investigation of a Bubbly Flow by Means of an Image Analysis Technique 1996
- Genetic Algorithm Tracking Technique for Particle Image Velocimetry and Comparison With Other Tracking Models 1996
- Comparison of the Hitachi steam condensation experiment with RELAP5/MOD3 1995
- Containment thermal hydraulics 1995
- Heat transfer and pressure drop characteristics of a plate heat exchanger using a propylene-glycol/water mixture as the working fluid 1995
- Mixed convective heat transfer between a series of vertical parallel plates with planar heat sources 1995
- RELAP5 model of a small break LOCA in GE's simplified boiling water reactor 1995
- Forward/adjoint transport formalism for sensitivity studies 1994
- Laminar heat transfer between a series of parallel plates with surface-mounted discrete heat sources 1994
- Numerical prediction of turbulent heat transfer in a rotating square duct with variable rotational buoyancy effects 1994
- Two-phase velocity measurements around cylinders using particle image velocimetry 1994
- Influence of mainstream turbulence on heat transfer coefficients from a gas turbine blade 1993
- Large eddy turbulent simulation of three dimensional bundle flows 1993
- Numerical analysis of turbulent flow and heat transfer over a backward facing step: Comparison with experimental results 1993
- Properly synchronized droplet sizing for intermittent high-pressure coal-water slurry (CWS) sprays using the light extinction as a triggering source 1993
- Simulation of steam condensation experiment in the presence of noncondensible gases using RELAP5/MOD3 thermal hydraulic code 1993
- Contact resistance and asymmetric heating effects for an internally finned parallel-plate channel 1992
- Turbulent heat transfer between a series of parallel plates with surface-mounted discrete heat sources 1992
- Evaporation heat transfer coefficients for R-22 in micro-fin tubes of different configurations 1992
- Heat transfer in a serpentine channel with a series of right angle turns 1991
- Effect of plate spacing on free convection between heated parallel plates 1990
- Full-field droplet velocity measurement of a spray by particle imaging displacement interferometry 1990
- Full-field velocity measurements in unsteady natural convection flow about a heated rod using pulsed laser velocimetry 1990
- Influence of high mainstream turbulence on leading edge heat transfer 1990
- Evaporation and condensation heat transfer and pressure drop in horizontal, 12.7-mm micro-fin tubes with Refrigerant 22 1989
- Free convection between series of vertical-parallel plates with embedded line heat sources 1989
- Turbulent heat transfer and friction in a square channel with discrete rib turbulators 1989
- Effect of jet grid turbulence on turbulent boundary layer heat transfer 1988
- Effect of laser beam velocity on cut quality and surface temperature 1988
- Improved heat transfer correlation for steam generator bundles 1988
- Transient response of an air-to-water cross-flow heat exchanger 1988
- COMPARISON OF AUGMENTATION TECHNIQUES DURING IN-TUBE EVAPORATION OF R-113. 1987
- LOCAL ENDWALL HEAT/MASS TRANSFER AND PRESSURE DROP IN A PIN FIN CHANNEL WITH LATERAL FLOW EJECTION. 1987
- LOCAL EVAPORATION HEAT TRANSFER IN A SMOOTH TUBE AND A MICRO-FIN TUBE USING REFRIGERANTS 22 AND 113. 1987
- CALCULATION STUDY OF NONEQUILIBRIUM POST-CHF HEAT TRANSFER IN ROD BUNDLE TEST USING MODIFIED RELAP5/MOD2. 1987
- COMPARISON OF IN-TUBE EVAPORATION OF REFRIGERANT 113 IN ELECTRICALLY HEATED AND FLUID HEATED SMOOTH AND INNER-FIN TUBES. 1987
- EFFECT OF LATERAL FLOW EJECTION ON TURBULENT HEAT TRANSFER IN PIN FIN CHANNELS. 1987
- SEMI-ANALYTICAL FORMULATION FOR HEAT TRANSFER FROM STRUCTURES WITH EMBEDDED TUBES. 1987
- AUGMENTATION OF R-113 IN-TUBE CONDENSATION WITH MICRO-FIN TUBES. 1986
- MONOTONE STREAMLINE UPWIND FINITE DIFFERENCE METHOD FOR CONVECTION-DOMINATED FLOWS. 1986
- NUMERICAL STUDY OF HEAT TRANSFER IN A HYDRONIC RADIANT CEILING PANEL. 1986
- THERMAL ANALYSIS OF AN INSTALLED GAS FIRED RADIANT HEATER. 1986
- THERMAL HYDRAULIC PREDICTIONS OF A 19-TUBE ONCE-THROUGH STEAM GENERATOR TEST USING TRAC-PF1. 1985
- INTERZONE TEMPERATURE PROFILE ESTIMATION - BELOW GRADE BASEMENT HEAT TRANSFER RESULTS. 1985
- INTERZONE TEMPERATURE PROFILE ESTIMATION - SLAB-ON-GRADE HEAT TRANSFER RESULTS. 1985
- TWO-PHASE FLOW MODEL FOR A CAPILLARY TUBE WITH FLASHING AND HEAT EXCHANGE. 1983