Nguyen Hung - Texas A&M University (TAMU) Scholar

education and training

Ph.D. in Mechanical Engineering, University of California, Berkeley - (Berkeley, California, United States) 1987
M.S. in Mechanical Engineering, University of Michigan-Ann Arbor - (Ann Arbor, Michigan, United States) 1979
B.S. in Mechanical Engineering, University of Michigan-Ann Arbor - (Ann Arbor, Michigan, United States) 1978

selected publications

academic article
- Wang, Z., Kovvuri, V., Araujo, A., Bacci, M., Hung, W., & Bukkapatnam, S. (2016). Built-up-edge effects on surface deterioration in micromilling processes. JOURNAL OF MANUFACTURING PROCESSES. 24, 321-327.
- Ziberov, M., Silva, M., Jackson, M., & Hung, W. (2016). Effect of Cutting Fluid on Micromilling of Ti-6Al-4V Titanium Alloy. 44TH NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 44. 5, 332-347.
- Feng, Z., Granda, E., & Hung, W. (2016). Experimental Investigation of Vibration-assisted Pulsed Electrochemical Machining. 44TH NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 44. 5, 798-814.
- Izwan, N., Feng, Z., Patel, J. B., & Hung, W. N. (2016). Prediction of Material Removal Rate in Die-sinking Electrical Discharge Machining. 44TH NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 44. 5, 658-668.
- Velamati, M., Aguilar, E., Garza-CastaÃ±on, M. A., Hung, N. P., & Powers, M. (2012). Laser and resistance joining of aluminum-graphite composite. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY. 212(11), 2549-2557.
- Kajaria, S., Chittipolu, S., Adera, S., & Hung, W. N. (2012). Micromilling in minimum quantity lubrication. MACHINING SCIENCE AND TECHNOLOGY. 16(4), 524-546.
- Ali, M. Y., Hung, W., & Yongqi, F. (2010). A review of focused ion beam sputtering. International Journal of Precision Engineering and Manufacturing. 11(1), 157-170.
- Mani, S., Perez, R., Lee, H., Ounaies, Z., Hung, W., & Liang, H. (2007). Effects of applied potential on friction of a piezoelectric material. 2008 Proceedings of the STLE/ASME International Joint Tribology Conference, IJTC 2008. 129(4), 836-840.
- Lee, S. G., & Hung, W. (2006). Manufacturing engineering education in Singapore. JOURNAL OF MANUFACTURING SYSTEMS. 24(3), 271-276.
- Hung, W., & Leon, V. J. (2005). Manufacturing education and research at Texas A&M University: Responding to global trends. JOURNAL OF MANUFACTURING SYSTEMS. 24(3), 153-161.
chapter
- Hung, N. P., Velamati, M., Aguilar, E., Garza-CastaÃ±on, M. A., & Powers, M. (2011). Joining of Advanced Aluminum-Graphite Composite. Supplemental Proceedings: Materials Fabrication, Properties, Characterization, and Modeling. (pp. 805-812).
conference paper
- Martínez-Alvarado, R., Granda-Gutierrez, E. E., Zuniga, L. M., Guerrero, R., & Hung, W. (2016). Pulsed power supply for electrochemical machining
- Kovvuri, V., Wang, Z., Araujo, A., da Silva, M. B., Bukkapatnam, S., & Hung, W. (2015). Built-Up-Edge Formation in Micromilling. v02at02a057-v02at02a057.
- Zhujian, F., Trung, L. Q., & Hung, W. (2015). Characterization of Hip Implant Surfaces. 64-68.
- Li, Q., Lerma, I., Alvarado, J., Edinbarough, I., & Hung, W. (2015). Characterization of Micromist for Effective Machining. v02at02a058-v02at02a058.
- Halfmann, E. B., Suh, C. S., Hung, N. P., & ASME, .. (2013). TURNING DYNAMICS PART 1: EXPERIMENTAL ANALYSIS. 647-655.
- Halfmann, E. B., Suh, C. S., Hung, N. P., & ASME, .. (2013). TURNING DYNAMICS PART 2: STABILITY AT HIGH SPEED. 657-665.
- Hung, N. P., Velamati, M., Aguilar, E., Garza-CastaÃ±on, M. A., & Powers, M. (2011). Joining of advanced aluminum-graphite composite. 805-812.
- Hung, N. P., Viswanathan, L., & Powers, M. (2011). Profile of electrochemically machined microcomponents. 325-332.
- Ali, M. Y., Omar, M. A., Othman, K. I., & Hung, W. (2009). Prediction of burr formation in fabricating MEMS components by micro end milling. ADVANCED ENGINEERING MATERIALS II, PTS 1-3. 247-250.
- Ozkeskin, F. M., Sundarram, S. S., Allison, S., Hung, N. P., Powers, M., Strohm, G., Godinez, L. A., & Manquez, J. R. (2008). Feedback controlled high frequency electrochemical micromachining. Proceedings of the International Instrumentation Symposium. 70-81.
- Um, D., & Hung, W. (2006). A novel infrared proximity array sensor for 3D visual sensing: Modeling and applications
- Mani, S., Perez, R., Lee, H., Ounaies, Z., Hung, W., & Liang, H. (2006). Effects of applied potential on friction of a PVDF micro gripper
- Hung, W., Ali, M. Y., Agnihotri, M. M., & Yuan, S. (2006). Molding of three-dimensional microcomponents

principal investigator on

Email

hung@tamu.edu

First Name

Nguyen

Last Name

Hung

mailing address

Texas A&M University

Engineering Technology

3367 TAMU

College Station, TX 77843-3367

USA

Hung, Nguyen Associate Professor

Positions

Academic Background

education and training

Publications

selected publications

academic article

chapter

conference paper

Grants/awards

principal investigator on

co-principal investigator on

Recent Courses

teaching activities

Works By Students

chaired theses and dissertations

Contact

Email

First Name

Last Name

mailing address