HR job title
- Retired Senior Professor
- Contact Info
- 1 979 845 0819
- Websites
Schobeiri, Meinhard Professor
Positions
- Professor, Mechanical Engineering, College of Engineering
Our research at TPFL covers a wide range of topics dealing with all aspects of aero-thermodynamic design and development of turbomachinery, particularly turbine components. This includes steady and unsteady aerodynamics, heat transfer, film cooling, and design and off-design performance of power and thrust generation gas turbines.
- Overview
- Publications
- Teaching
- Works By Students
- Background
- Contact
- Other
- View All
Overview
Publications
selected publications
-
academic article
-
Ghoreyshi, S. M., & Schobeiri, M. T.
(2021).
The ultra-high efficiency gas turbine engine, UHEGT, part I: Design and numerical analysis of the multistage system. Proceedings of the Institution of Mechanical Engineers Part A: Journal of Power and Energy.
235(5), 974-990.
-
Ghoreyshi, S. M., & Schobeiri, M. T.
(2021).
The ultra-high efficiency gas turbine engine, UHEGT, Part II: A numerical study on reducing the stator blade surface temperature by indexing fuel injectors and using film cooling. 235(5), 991-1004.
-
Ghoreyshi, S. M., & Schobeiri, M. T.
(2021).
The ultra-high efficiency gas turbine engine, uhegt, part III: Dynamic behavior of the system in variable performance conditions. Proceedings of the Institution of Mechanical Engineers Part A: Journal of Power and Energy.
235(5), 1005-1018.
-
Nikparto, A., & Schobeiri, M. T.
(2018).
Combined numerical and experimental investigations of heat transfer of a highly loaded low-pressure turbine blade under periodic inlet flow condition. Proceedings of the Institution of Mechanical Engineers Part A: Journal of Power and Energy.
232(7), 769-784.
-
MT, S.
(2018).
Improving the Efficiency of Gas Turbines During Off-Design Operation by Adjusting the Turbine and Compressor Blade Stagger Angles. Journal of Applied Mechanical Engineering.
7(1), 1-10.
-
Nikparto, A., & Schobeiri, M. T.
(2017).
Experimental Investigation of Film-Cooling Effectiveness of a Highly Loaded Turbine Blade Under Steady and Periodic Unsteady Flow Conditions. Journal of Heat Transfer: Transactions of the ASME.
139(7), 072201.
-
Schobeiri, M. T., & Ghoreyshi, S. M.
(2016).
The Ultrahigh Efficiency Gas Turbine Engine With Stator Internal Combustion. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.
138(2), 021506.
-
Rezasoltani, M., Lu, K., Schobeiri, M. T., & Han, J.
(2015).
A Combined Experimental and Numerical Study of the Turbine Blade Tip Film Cooling Effectiveness Under Rotation Condition. Journal of Turbomachinery.
137(5), 051009.
-
Rezasoltani, M., Schobeiri, M. T., & Han, J. C.
(2014).
Experimental Investigation of the Effect of Purge Flow on Film Cooling Effectiveness on a Rotating Turbine With Nonaxisymmetric End Wall Contouring. Journal of Turbomachinery.
136(9), 091009.
-
Schobeiri, M. T., & Lu, K.
(2014).
Endwall Contouring Using Continuous Diffusion: A New Method and its Application to a Three-Stage High Pressure Turbine. Journal of Turbomachinery.
136(1),
-
Schobeiri, M. T., & Abdelfattah, S.
(2013).
On the Reliability of RANS and URANS Numerical Results for High-Pressure Turbine Simulations: A Benchmark Experimental and Numerical Study on Performance and Interstage Flow Behavior of High-Pressure Turbines at Design and Off-Design Conditions Using Two Different Turbine Designs. 135(6), 061012.
-
Schobeiri, M. T., Abdelfattah, S., & Chibli, H.
(2012).
Investigating the Cause of Computational Fluid Dynamics Deficiencies in Accurately Predicting the Efficiency and Performance of High Pressure Turbines: A Combined Experimental and Numerical Study. Journal of Fluids Engineering, Transactions of the ASME.
134(10), 101104.
-
Abdelfattah, S., & Schobeiri, M. T.
(2012).
Experimental and numerical investigations of aerodynamic behavior of a three-stage high-pressure turbine at different operation conditions. 226(C6), 1535-1549.
-
Schobeiri, M. T., & Lu, K.
(2012).
ENDWALL CONTOURING USING CONTINIOUS DIFFUSION, A BREAKTHROUGH METHOD AND ITS APPLICATION TO A THREE-STAGE HIGH PRESSURE TURBINE. Journal of Turbomachinery.
136(1), 787-797.
-
Suryanarayanan, A., Ozturk, B., Schobeiri, M. T., & Han, J. C.
(2010).
Film-Cooling Effectiveness on a Rotating Turbine Platform Using Pressure Sensitive Paint Technique. Journal of Turbomachinery.
132(4), 041001-13.
-
Knig, S., Stoffel, B., & Taher Schobeiri, M.
(2009).
Experimental Investigation of the Clocking Effect in a 1.5-Stage Axial TurbinePart I: Time-Averaged Results. 131(2), 021003.
-
Knig, S., Stoffel, B., & Taher Schobeiri, M.
(2009).
Experimental Investigation of the Clocking Effect in a 1.5-Stage Axial TurbinePart II: Unsteady Results and Boundary Layer Behavior. 131(2), 021004.
-
Suryanarayanan, A., Mhetras, S. P., Schobeiri, M. T., & Han, J. C.
(2009).
Film-Cooling Effectiveness on a Rotating Blade Platform. Journal of Turbomachinery.
131(1), 011014.
-
Schobeiri, M. T.
(2008).
Influence of curvature and pressure gradient on turbulent wake development in curved channels. 130(9), 091201-09120114.
-
Schobeiri, M. T., Ozturk, B., Kegalj, M., & Bensing, D.
(2008).
On the physics of heat transfer and aerodynamic behavior of separated flow along a highly loaded low pressure turbine blade under periodic unsteady wake flow and varying of turbulence intensity. Journal of Heat Transfer: Transactions of the ASME.
130(5), 051703.
-
Oeztuerk, B., & Schobeiri, M. T.
(2007).
Effect of turbulence intensity and periodic unsteady wake flow condition on boundary layer development, separation, and reattachment along the suction surface of a low-pressure turbine blade. Journal of Fluids Engineering, Transactions of the ASME.
129(6), 747-763.
-
Schobeiri, M. T., Ozturk, B., & Ashpis, D. E.
(2007).
Effect of Reynolds number and periodic unsteady wake flow condition on boundary layer development, separation, and intermittency behavior along the suction surface of a low pressure turbine blade. 129(1), 92-107.
-
Ahn, J., Schobeiri, M. T., Han, J., & Moon, H.
(2007).
Effect of rotation on leading edge region film cooling of a gas turbine blade with three rows of film cooling holes. International Journal of Heat and Mass Transfer.
50(1-2), 15-25.
-
Skoda, R., Schilling, R., & Schobeiri, M. T.
(2007).
Numerical Simulation of the Transitional and Unsteady Flow through a Low Pressure Turbine. International Journal of Rotating Machinery.
2007, 1-11.
-
Ahn, J., Schobeiri, M. T., Han, J., & Moon, H.
(2006).
Film cooling effectiveness on the leading edge region of a rotating turbine blade with two rows of film cooling holes using pressure sensitive paint. Journal of Heat Transfer: Transactions of the ASME.
128(9), 879-888.
-
Schobeiri, M. T., Ozturk, B., & Ashpis, D. E.
(2005).
On the physics of flow separation along a low pressure turbine blade under unsteady flow conditions. 127(3), 503-513.
-
Schobeiri, M. T., & Ozturk, B.
(2004).
Experimental study of the effect of periodic unsteady wake flow on boundary layer development, separation, and reattachment along the surface of a low pressure turbine blade. Journal of Turbomachinery.
126(4), 663-676.
-
Schobeiri, M. T., Gilarranz, J. L., & Johansen, E. S.
(2004).
Aerodynamic and Performance Behavior of a Three-Stage High Efficiency Turbine at Design and Off-Design Operating Points. International Journal of Rotating Machinery.
10(1), 33-44.
-
Schobeiri, M., Gilarranz, J., & Johansen, E.
(2004).
Aerodynamic and Performance Behavior of a Three-Stage High Efficiency Turbine at Design and Off-Design Operating Points. International Journal of Rotating Machinery.
10(1), 33-44.
-
Schobeiri, M. T., & Attia, M.
(2003).
Active control of compressor instability and surge by stator blades adjustment. Journal of Propulsion and Power: devoted to aerospace propulsion and power.
19(2), 312-317.
-
Schobeiri, M. T., Read, K., & Lewalle, J.
(2003).
Effect of unsteady wake passing frequency on boundary layer transition, experimental investigation, and wavelet analysis. Journal of Fluids Engineering, Transactions of the ASME.
125(2), 251-266.
-
Schobeiri, M. T., & Wright, L.
(2003).
Advances in Unsteady Boundary Layer Transition Research, Part I: Theory and Modeling. International Journal of Rotating Machinery.
9(1), 1-9.
-
Schobeiri, M. T., & Wright, L.
(2003).
Advances in Unsteady Boundary Layer Transition Research, Part I: Theory and Modeling. International Journal of Rotating Machinery.
9(1), 1-9.
-
Schobeiri, M. T., & Wright, L.
(2003).
Advances in Unsteady Boundary Layer Transition Research, Part II: Experimental Verification. International Journal of Rotating Machinery.
9(1), 11-22.
-
Schobeiri, M. T., & Wright, L.
(2003).
Advances in Unsteady Boundary Layer Transition Research, Part II: Experimental Verification. International Journal of Rotating Machinery.
9(1), 11-22.
-
Schobeiri, M. T., & Chakka, P.
(2002).
Prediction of turbine blade heat transfer and aerodynamics using a new unsteady boundary layer transition model. 45(4), 815-829.
-
Schobeiri, M. T.
(2000).
Comment on "Shock-loss model for transonic and supersonic axial compressors with curved blades" - Reply by the author to N. A. Cumpsty and C. Freeman. Journal of Propulsion and Power: devoted to aerospace propulsion and power.
16(1), 168-168.
-
Schobeiri, M. T., Wright, L., & Chakka, P.
(2000).
Periodic Unsteady Flow Aerodynamics and Heat Transfer: Studies on a Curved Surface, Combined Part I and II. International Journal of Rotating Machinery.
6(6), 393-416.
-
Schobeiri, M. T.
(2000).
Reply by the Author to N. A. Cumpsty and C. Freeman. Journal of Propulsion and Power: devoted to aerospace propulsion and power.
16(1), 168-168.
-
Wright, L., & Schobeiri, M. T.
(1999).
The effect of periodic unsteady flow on aerodynamics and heat transfer on a curved surface. Journal of Heat Transfer: Transactions of the ASME.
121(1), 22-33.
-
Chakka, P., & Schobeiri, M. T.
(1999).
Modeling unsteady boundary layer transition on a curved plate under periodic unsteady flow conditions: Aerodynamic and heat transfer investigations. Journal of Turbomachinery.
121(1), 88-97.
-
Schobeiri, M. T., & Pappu, K.
(1999).
Optimization of trailing edge ejection mixing losses: A theoretical and experimental study. Journal of Fluids Engineering, Transactions of the ASME.
121(1), 118-125.
-
Morrison, G. L., Schobeiri, M. T., & Pappu, K. R.
(1998).
Five-hole pressure probe analysis technique. 9(3), 153-158.
-
Schobeiri, M. T.
(1998).
Shock-loss model for transonic and supersonic axial compressors with curved blades. Journal of Propulsion and Power: devoted to aerospace propulsion and power.
14(4), 470-478.
-
Schobeiri, M. T., & Pappu, K.
(1997).
Experimental study on the effect of unsteadiness on boundary layer development on a linear turbine cascade. Experiments in Fluids.
23(4), 306-316.
-
Schobeiri, M. T.
(1997).
Advanced Compressor Loss Correlations, Part I: Theoretical Aspects. International Journal of Rotating Machinery.
3(3), 163-177.
-
Schobeiri, M. T.
(1997).
Advanced Compressor Loss Correlations, Part II: Experimental Verifications. International Journal of Rotating Machinery.
3(3), 179-187.
-
Schobeiri, M. T., & Pappu, K.
(1997).
Optimum trailing edge ejection for cooled gas turbine blades. Konstruktion.
49(1-2), 33-39.
-
Schobeiri, M. T., & Attia, M. S.
(1996).
A computational method for dynamic simulation of aero- and stationary gas turbine engines. ZEITSCHRIFT FUR FLUGWISSENSCHAFTEN UND WELTRAUMFORSCHUNG.
20(5), 227-238.
-
Schobeiri, M. T., John, J., & Pappu, K.
(1996).
Development of Two-Dimensional Wakes Within Curved Channels: Theoretical Framework and Experimental Investigation. Journal of Turbomachinery.
118(3), 506-518.
-
John, J., & Schobeiri, M. T.
(1996).
Development of a two-dimensional turbulent wake in a curved channel with a positive streamwise pressure gradient. Journal of Fluids Engineering, Transactions of the ASME.
118(2), 292-299.
-
Schobeiri, M. T., Pappu, K., & John, J.
(1995).
Theoretical and experimental study of development of two-dimensional steady and unsteady wakes within curved channels. Journal of Fluids Engineering, Transactions of the ASME.
117(4), 593-598.
-
Schobeiri, M. T., & Radke, R. E.
(1995).
DIGITAL VISUALIZATION OF THE BEHAVIOR OF PERIODIC UNSTEADY BOUNDARY LAYER TRANSITION ALONG A CURVED PLATE AT ZERO LONGITUDINAL PRESSURE GRADIENT. Journal of Flow Visualization and Image Processing.
2(1), 39-59.
-
SCHOBEIRI, M. T., ATTIA, M., & LIPPKE, C.
(1994).
NONLINEAR DYNAMIC SIMULATION OF SINGLE-SPOOL AND MULTISPOOL CORE ENGINES .2. SIMULATION, CODE VALIDATION. Journal of Propulsion and Power: devoted to aerospace propulsion and power.
10(6), 863-867.
-
SCHOBEIRI, M. T., ATTIA, M., & LIPPKE, C.
(1994).
GETRAN - A GENERIC, MODULARLY STRUCTURED COMPUTER CODE FOR SIMULATION OF DYNAMIC BEHAVIOR OF AERO AND POWER-GENERATION GAS-TURBINE ENGINES. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.
116(3), 483-494.
-
Schobeiri, M. T., Attia, M., & Lippke, C.
(1994).
GETRAN: a generic, modularly structured computer code for simulation of dynamic behavior of aero- and power generation gas turbine engines. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.
116(3), 494-483.
-
Schobeiri, M. T., Pappu, K., & John, J.
(1994).
On the Development of Two-Dimensional Wakes within Curved Channels: Experimental and Theoretical Investigation. International Journal of Rotating Machinery.
1(1), 19-35.
-
SCHOBEIRI, M. T.
(1990).
THE INFLUENCE OF CURVATURE AND PRESSURE-GRADIENT ON THE FLOW TEMPERATURE AND VELOCITY DISTRIBUTION. 32(10), 851-861.
-
SCHOBEIRI, M. T.
(1989).
STABILITY BEHAVIOR OF VORTEX FLOWS IN ANNULAR CHANNELS. ZEITSCHRIFT FUR FLUGWISSENSCHAFTEN UND WELTRAUMFORSCHUNG.
13(4), 233-239.
-
SCHOBEIRI, M. T.
(1987).
SIMPLE APPROXIMATION METHOD FOR CALCULATING THE PERFORMANCE OF TURBINES. 53(1), 33-36.
-
SCHOBEIRI, M. T.
(1985).
THE INFLUENCE OF TRAILING-EDGE EJECTION ON THE MIXING LOSSES BEHIND A COOLED BLADE. Forschung im Ingenieurwesen.
51(1), 25-28.
-
Schobeiri, M. T.
(1980).
Distribution of Speed and Temperature in Hamel's Spiral Flow. 60(4),
-
SCHOBEIRI, M. T.
(1980).
VELOCITY AND TEMPERATURE DISTRIBUTION IN HAMEL SPIRAL FLOW. Journal of Applied Mathematics and Mechanics (ZAMM).
60(4), 195-200.
-
SCHOBEIRI, M. T.
(1976).
APPROXIMATE SOLUTION OF NAVIER-STOKES DIFFERENTIAL EQUATION FOR BIDIMENSIONAL STEADY LAMINAR-FLOW OF CONSTANT VISCOSITY IN CONVEX AND CONCAVE DIFFUSERS AND NOZZLES. 27(1), 9-21.
-
Ghoreyshi, S. M., & Schobeiri, M. T.
(2021).
The ultra-high efficiency gas turbine engine, UHEGT, part I: Design and numerical analysis of the multistage system. Proceedings of the Institution of Mechanical Engineers Part A: Journal of Power and Energy.
235(5), 974-990.
-
book
-
Schobeiri, M. T.
(2022).
Advanced Fluid Mechanics and Heat Transfer for Engineers and Scientists. Springer Nature.
-
Schobeiri, M. T.
(2021).
Tensor Analysis for Engineers and Physicists - With Application to Continuum Mechanics, Turbulence, and Einsteins Special and General Theory of Relativity. Springer Nature.
-
Schobeiri, M. T.
(2019).
Gas Turbine Design, Components and System Design Integration, Second Revised and Enhanced Edition. Springer Nature.
-
Schobeiri, M. T.
(2018).
Gas Turbine Design, Components and System Design Integration. Springer Nature.
-
Schobeiri, M. T.
(2012).
Turbomachinery flow physics and dynamic performance. Ed. 9783642246753.
-
Schobeiri, M. T.
(2012).
Turbomachinery Flow Physics and Dynamic Performance. Springer Nature.
-
Schobeiri, M. T.
(2010).
Fluid Mechanics for Engineers: A Graduate Textbook. Springer Nature.
-
Schobeiri, M.
(2005).
Turbomachinery Flow Physics and Dynamic Performance. Springer Nature.
-
Schobeiri, M. T.
(2022).
Advanced Fluid Mechanics and Heat Transfer for Engineers and Scientists. Springer Nature.
-
chapter
-
Schobeiri, M. T.
(2021).
Turbomachinery. Springer Handbook of Mechanical Engineering.
(pp. 777-828).
Springer Nature.
-
Schobeiri, M. T.
(2019).
Blade Design. Gas Turbine Design, Components and System Design Integration.
(pp. 249-275).
Springer Nature.
-
Schobeiri, M. T.
(2019).
Efficiency of Multi-Stage Turbomachines. Gas Turbine Design, Components and System Design Integration.
(pp. 215-224).
Springer Nature.
-
Schobeiri, M. T.
(2019).
Gas Turbine Thermodynamic Process. Gas Turbine Design, Components and System Design Integration.
(pp. 33-49).
Springer Nature.
-
Schobeiri, M. T.
(2019).
Generic Modeling of Turbomachinery Components and Systems. Gas Turbine Design, Components and System Design Integration.
(pp. 323-340).
Springer Nature.
-
Schobeiri, M. T.
(2019).
Incidence and Deviation. Gas Turbine Design, Components and System Design Integration.
(pp. 227-247).
Springer Nature.
-
Schobeiri, M. T.
(2019).
Introduction, Gas Turbines, Applications, Types. Gas Turbine Design, Components and System Design Integration.
(pp. 1-32).
Springer Nature.
-
Schobeiri, M. T.
(2019).
Losses In Turbine and Compressor Cascades. Gas Turbine Design, Components and System Design Integration.
(pp. 159-212).
Springer Nature.
-
Schobeiri, M. T.
(2019).
Modeling of Inlet, Exhaust, and Pipe Systems. Gas Turbine Design, Components and System Design Integration.
(pp. 343-352).
Springer Nature.
-
Schobeiri, M. T.
(2019).
Modeling of Recuperators, Combustion Chambers, Afterburners. Gas Turbine Design, Components and System Design Integration.
(pp. 355-370).
Springer Nature.
-
Schobeiri, M. T.
(2019).
Modeling the Compressor Component, Design and Off-Design. Gas Turbine Design, Components and System Design Integration.
(pp. 373-427).
Springer Nature.
-
Schobeiri, M. T.
(2019).
Nonlinear Dynamic Simulation of Turbomachinery Components and Systems. Gas Turbine Design, Components and System Design Integration.
(pp. 305-320).
Springer Nature.
-
Schobeiri, M. T.
(2019).
Radial Equilibrium. Gas Turbine Design, Components and System Design Integration.
(pp. 277-304).
Springer Nature.
-
Schobeiri, M. T.
(2019).
Simulation of Gas Turbine Engines, Design Off-Design and Dynamic Performance. Gas Turbine Design, Components and System Design Integration.
(pp. 481-516).
Springer Nature.
-
Schobeiri, M. T.
(2019).
Special Topic: Reducing the Secondary Flow Losses By Endwall Contouring. Gas Turbine Design, Components and System Design Integration.
(pp. 517-530).
Springer Nature.
-
Schobeiri, M. T.
(2019).
Theory of Turbomachinery Stages. Gas Turbine Design, Components and System Design Integration.
(pp. 109-131).
Springer Nature.
-
Schobeiri, M. T.
(2019).
Thermo-Fluid Essentials for Gas Turbine Design. Gas Turbine Design, Components and System Design Integration.
(pp. 51-107).
Springer Nature.
-
Schobeiri, M. T.
(2019).
Turbine Aerodynamic Design and Off-Design Performance. Gas Turbine Design, Components and System Design Integration.
(pp. 429-456).
Springer Nature.
-
Schobeiri, M. T.
(2019).
Turbine and Compressor Cascade Flow Forces. Gas Turbine Design, Components and System Design Integration.
(pp. 133-157).
Springer Nature.
-
Schobeiri, M. T.
(2019).
Gas Turbine Design, Preliminary Considerations. Gas Turbine Design, Components and System Design Integration.
(pp. 457-479).
Springer Nature.
-
Schobeiri, M. T.
(2010).
Boundary Layer Theory. FLUID MECHANICS FOR ENGINEERS: A GRADUATE TEXTBOOK.
(pp. 357-421).
Springer Berlin Heidelberg.
-
Schobeiri, M. T.
(2010).
Differential Balances in Fluid Mechanics. FLUID MECHANICS FOR ENGINEERS: A GRADUATE TEXTBOOK.
(pp. 51-80).
Springer Berlin Heidelberg.
-
Schobeiri, M. T.
(2010).
Fluid Mechanics for Engineers A Graduate Textbook Introduction. FLUID MECHANICS FOR ENGINEERS: A GRADUATE TEXTBOOK.
(pp. 1-10).
-
Schobeiri, M. T.
(2010).
Free Turbulent Flow. FLUID MECHANICS FOR ENGINEERS: A GRADUATE TEXTBOOK.
(pp. 327-356).
Springer Berlin Heidelberg.
-
Schobeiri, M. T.
(2010).
Integral Balances in Fluid Mechanics. FLUID MECHANICS FOR ENGINEERS: A GRADUATE TEXTBOOK.
(pp. 81-138).
Springer Berlin Heidelberg.
-
Schobeiri, M. T.
(2010).
Inviscid Potential Flows. FLUID MECHANICS FOR ENGINEERS: A GRADUATE TEXTBOOK.
(pp. 139-199).
Springer Berlin Heidelberg.
-
Schobeiri, M. T.
(2010).
Kinematics of Fluid Motion. FLUID MECHANICS FOR ENGINEERS: A GRADUATE TEXTBOOK.
(pp. 31-49).
Springer Berlin Heidelberg.
-
Schobeiri, M. T.
(2010).
Laminar-Turbulent Transition. FLUID MECHANICS FOR ENGINEERS: A GRADUATE TEXTBOOK.
(pp. 233-269).
Springer Berlin Heidelberg.
-
Schobeiri, M. T.
(2010).
Tensor Operations in Orthogonal Curvilinear Coordinate Systems. FLUID MECHANICS FOR ENGINEERS: A GRADUATE TEXTBOOK.
(pp. 475-487).
-
Schobeiri, M. T.
(2010).
Turbulent Flow, Modeling. FLUID MECHANICS FOR ENGINEERS: A GRADUATE TEXTBOOK.
(pp. 271-326).
Springer Berlin Heidelberg.
-
Schobeiri, M. T.
(2010).
Vector and Tensor Analysis, Applications to Fluid Mechanics. FLUID MECHANICS FOR ENGINEERS: A GRADUATE TEXTBOOK.
(pp. 11-29).
Springer Berlin Heidelberg.
-
Schobeiri, M. T.
(2010).
Viscous Laminar Flow. FLUID MECHANICS FOR ENGINEERS: A GRADUATE TEXTBOOK.
(pp. 201-232).
Springer Berlin Heidelberg.
-
Schobeiri, M. T.
(2009).
Turbomachinery. Springer Handbook of Mechanical Engineering.
(pp. 967-1010).
Springer Nature.
-
Schobeiri, M. T.
(2006).
Recent advances in unsteady boundary layer transition research. Flow Phenomena in Nature Volume 2.
(pp. 573-605).
WITPRESS LTD..
-
Schobeiri, M. T.
(1980).
Geschwindigkeits- und Temperaturverteilung in Hamelscher Spiralstrmung. April 1980.
(pp. 195-200).
DE GRUYTER.
-
Schobeiri, M. T.
(2021).
Turbomachinery. Springer Handbook of Mechanical Engineering.
(pp. 777-828).
Springer Nature.
-
conference paper
-
Nikparto, A., & Schobeiri, M. T.
(2019).
A NEW PHYSICS BASED UNSTEADY TRANSITION MODEL USING THE UNIVERSAL INTERMITTENCY FUNCTION
-
Ghoreyshi, S. M., & Schobeiri, M. T.
(2019).
DYNAMIC BEHAVIOR OF THE ULTRA-HIGH EFFICIENCY GAS TURBINE ENGINE, UHEGT, WITH STATOR INTERNAL COMBUSTION
-
Ghoreyshi, S. M., & Schobeiri, M. T.
(2018).
A Numerical Study on Reducing the Stator Blade Surface Temperature in the Ultra-High Efficiency Gas Turbine Engine by Indexing Fuel Injectors and Using Film Cooling. v003t06a007-v003t06a007.
-
Schobeiri, M. T.
(2018).
Impact of Turbine Blade Stagger Angle Adjustment On the Efficiency and Performance of Gas Turbines During Off-Design and Dynamic Operation. v001t01a020-v001t01a020.
-
Ghoreyshi, S. M., & Schobeiri, M. T.
(2018).
A NUMERICAL STUDY ON REDUCING THE STATOR BLADE SURFACE TEMPERATURE IN THE ULTRA-HIGH EFFICIENCY GAS TURBINE ENGINE BY INDEXING FUEL INJECTORS AND USING FILM COOLING
-
Nikparto, A., & Schobeiri, M. T.
(2017).
INVESTIGATION OF AERODYNAMICS AND HEAT TRANSFER OF A HIGHLY LOADED TURBINE BLADE USING THE UNIVERSAL INTERMITTENCY FUNCTION. v02dt46a030-v02dt46a030.
-
Nikparto, A., Rice, T., & Schobeiri, M. T.
(2017).
Experimental and Numerical Investigation of Heat Transfer and Film Cooling Effectiveness of a Highly Loaded Turbine Blade Under Steady and Unsteady Wake Flow Condition. v05ct19a029-v05ct19a029.
-
Ghoreyshi, S. M., & Schobeiri, M. T.
(2017).
NUMERICAL SIMULATION OF THE MULTISTAGE ULTRA-HIGH EFFICIENCY GAS TURBINE ENGINE, UHEGT. v003t06a034-v003t06a034.
-
Nikparto, A., & Schobeiri, M. T.
(2016).
Experimental Investigation of Film Cooling Effectiveness of a Highly Loaded Turbine Blade Under Steady and Periodic Unsteady Flow Conditions. v05ct19a015-v05ct19a015.
-
Nikparto, A., & Schobeiri, M. T.
(2016).
Numerical And Experimental Investigation of Aerodynamics On Flow Around A Highly Loaded Low-Pressure Turbine Blade with Flow Separation Under Steady And Periodic Unsteady Inlet Flow Condition. v05at13a010-v05at13a010.
-
Schobeiri, M. T., Lu, K., & Rezasoltani, M.
(2015).
Effect of non-axisymmetric contouring on performance and film cooling of a rotating turbine endwall subjected to the secondary air purge: A combined numerical and experimental study. Proceedings of the Institution of Mechanical Engineers Part A: Journal of Power and Energy.
813-831.
-
Schobeiri, M. T., & Ghoreyshi, S. M.
(2015).
UHEGT, THE ULTRA-HIGH EFFICIENCY GAS TURBINE ENGINE WITH STATOR INTERNAL COMBUSTION. v003t06a019-v003t06a019.
-
Rezasoltani, M., Lu, K., Schobeiri, M. T., & Han, J. C.
(2014).
A Combined Experimental and Numerical Study of the Turbine Blade Tip Film Cooling Effectiveness under Rotation Condition. v05bt13a019-v05bt13a019.
-
Lu, K., Rezasoltani, M., Schobeiri, M. T., & Han, J. C.
(2014).
A Combined Numerical and Experimental Study of the Effect of Non-Axisymmetric Contouring on Performance and Film Cooling Behavior of a Rotating Turbine Endwall. v05bt13a020-v05bt13a020.
-
Schobeiri, M. T., & Nikparto, A.
(2014).
A Comparative Numerical Study of Aerodynamics and Heat Transfer on Transitional Flow Around a Highly Loaded Turbine Blade with Flow Separation Using RANS, URANS and LES. v05ct17a001-v05ct17a001.
-
Rezasoltani, M., Schobeiri, M. T., & Han, J. C.
(2013).
Experimental Investigation of the Effect of Purge Flow on Film Cooling Effectiveness on a Rotating Turbine with Non-Axisymmetric Endwall Contouring. v03bt13a033-v03bt13a033.
-
Lu, K., Schobeiri, M. T., & Han, J. C.
(2013).
Numerical Simulation of Film Cooling on Rotating Blade Tips within a High-Pressure Turbine. v03bt13a032-v03bt13a032.
-
Schobeiri, M. T., Lu, K., & Han, J. C.
(2012).
Numerical Investigation of the Effect of Purge Flow on Aerodynamic Performance and Film Cooling Effectiveness on a Rotating Turbine with Non-Axisymmetric Endwall Contouring. 413-423.
-
Abdelfattah, S. A., Chibli, H. A., & Schobeiri, M. T.
(2012).
AERODYNAMIC INVESTIGATION OF THE PERFORMANCE OF A TWO STAGE AXIAL TURBINE AT DESIGN AND OFF-DESIGN CONDITIONS. 775-785.
-
Schobeiri, M. T., & Lu, K.
(2012).
Advances in endwall contouring using continuous diffusion method and its application to a three-stage high pressure turbine
-
Schobeiri, M. T., & Lu, K.
(2011).
Endwall Contouring Using Continuous Diffusion: A Breakthrough Method and its Application to a Three-Stage High Pressure Turbine. 787-797.
-
Chibli, H. A., & Schobeiri, M. T.
(2010).
Effects of flow incidence on the aerodynamic performance of a two dimensional steam turbine stator blade cascade. 109-116.
-
Abdelfattah, S. A., & Schobeiri, M. T.
(2010).
EXPERIMENTAL AND NUMERICAL INVESTIGATIONS OF AERODYNAMIC BEHAVIOR OF A THREE-STAGE HP-TURBINE AT DIFFERENT OPERATING CONDITIONS. 1619-1632.
-
Chibli, H. A., Abdelfattah, S. A., Schobeiri, M. T., & Kang, C.
(2009).
AN EXPERIMENTAL AND NUMERICAL STUDY OF THE EFFECTS OF FLOW INCIDENCE ANGLES ON THE PERFORMANCE OF A STATOR BLADE CASCADE OF A HIGH PRESSURE STEAM TURBINE. 821-830.
-
Suryanarayanan, A., Ozturk, B., Schobeiri, M. T., & Han, J. C.
(2007).
Film-cooling effectiveness on a rotating turbine platform using pressure sensitive paint technique. 169-183.
-
Yang, H., Gao, Z., Chen, H. C., Han, J. C., & Schobeiri, M. T.
(2007).
Prediction of film cooling and heat transfer on a rotating blade platform with stator-rotor purge and discrete film-hole flows in a 1-1/2 turbine stage. 67-77.
-
Schobeiri, M. T., & ztrk, B.
(2006).
Combined effects of turbulence intensity and periodic unsteady wake flow condition on boundary layer separation and re-attachment along the suction surface of a low pressure turbine blade. 190-206.
-
Ozturk, B., & Schobeiri, M. T.
(2006).
Effect of turbulence intensity and periodic unsteady wake flow condition on boundary layer development, separation, and re-attachment over the separation bubble along the suction surface of a low pressure turbine blade. 1911-1930.
-
Suryanarayanan, A., Mhetras, S. R., Schobeiri, M. T., & Han, J. C.
(2006).
Film-cooling effectiveness on a rotating blade platform. 37-47.
-
Ahn, J., Schobeiri, M. T., Han, J., & Moon, H.
(2005).
Film cooling effectiveness on the leading edge of a rotating film-cooled blade using pressure sensitive paint. 375-384.
-
Schobeiri, M. T.
(2005).
Intermittency based unsteady boundary layer transition modeling, implementation into Navier-Stokes equations. 973-989.
-
Ozturk, B., Schobeiri, M. T., & Ashpis, D. E.
(2005).
Intermittent behavior of the separated boundary layer along the suction surface of a low pressure turbine blade under periodic unsteady flow conditions. 1011-1027.
-
Ozturk, B., Schobeiri, M. T., & Ashpis, D. E.
(2005).
Effect of Reynolds number and periodic unsteady wake flow condition on boundary layer development, separation, and re-attachment along the suction surface of a low pressure turbine blade. 991-1010.
-
Schobeiri, M. T., Suryanarayanan, A., Jermann, C., & Neuenschwander, T.
(2004).
A Comparative Aerodynamic and Performance Study of a Three-Stage High Pressure Turbine With 3-D Bowed Blades and Cylindrical Blades. 1237-1246.
-
Schobeiri, M. T., & Ozturk, B.
(2004).
Experimental Study of the Effect of Periodic Unsteady Wake Flow on Boundary Layer Development, Separation, and Re-Attachment Along the Surface of a Low Pressure Turbine Blade. 247-265.
-
Ahn, J., Schobeiri, M. T., Han, J., & Moon, H.
(2004).
Film Cooling Effectiveness on the Leading Edge of a Rotating Turbine Blade. ASME -Publications- Htd.
565-574.
-
Greendyke, R. B., & Schobeiri, M. T.
(2003).
Turbine blade cooling simulation in the gas turbine engine simulation code getran
-
Schobeiri, M. T., Ozturk, B., & Ashpis, D. E.
(2003).
On the Physics of the Flow Separation Along a Low Pressure Turbine Blade Under Unsteady Flow Conditions. 1063-1079.
-
Schobeiri, M. T.
(2001).
Active Aerodynamic Control of Multi-Stage Axial Compressor Instability and Surge by Dynamically Adjusting the Stator Blades. v001t03a067-v001t03a067.
-
Greendyke, R. B., Paxson, D. E., & Schobeiri, M. T.
(2000).
Dynamic simulation of a wave-rotor-topped turboshaft engine. Journal of Propulsion and Power: devoted to aerospace propulsion and power.
792-796.
-
Schobeiri, M. T., Gilarranz, J. L., & Johansen, E. S.
(2000).
Aerodynamic and Performance Studies of a Three-Stage High Pressure Research Turbine With 3-D - Blades, Design Point and Off-Design Experimental Investigations. v001t03a054-v001t03a054.
-
Chakka, P., & Schobeiri, M. T.
(1999).
Scales of Turbulence During Boundary Layer Transition Under Steady and Unsteady Flow Conditions. v003t01a063-v003t01a063.
-
Schobeiri, M. T., & Pappu, K.
(1999).
Optimization of trailing edge ejection mixing losses: A theoretical and experimental study. Journal of Fluids Engineering, Transactions of the ASME.
118-125.
-
Schobeiri, M. T., Chakka, P., & Pappu, K.
(1998).
Unsteady Wake Effects on Boundary Layer Transition and Heat Transfer Characteristics of a Turbine Blade
-
Schobeiri, M. T., Chakka, P., & Pappu, K.
(1998).
Unsteady Wake Effects on Boundary Layer Transition and Heat Transfer Characteristics of a Turbine Blade. American Society of Mechanical Engineers (Paper).
v001t01a080-v001t01a080.
-
Pappu, K. R., & Schobeiri, M. T.
(1997).
Optimization of Trailing Edge Ejection Mixing Losses: A Theoretical and Experimental Study. v001t03a106-v001t03a106.
-
Chakka, P., & Schobeiri, M. T.
(1997).
Modeling Unsteady Boundary Layer Transition on a Curved Plate Under Periodic Unsteady Flow Conditions: Aerodynamic and Heat Transfer Investigations
-
Chakka, P., & Schobeiri, M. T.
(1997).
Modeling Unsteady Boundary Layer Transition on a Curved Plate Under Periodic Unsteady Flow Conditions: Aerodynamic and Heat Transfer Investigations. American Society of Mechanical Engineers (Paper).
v001t03a061-v001t03a061.
-
Greendyke, R. B., Paxson, D. E., & Schobeiri, M. T.
(1997).
Dynamic simulation of a wave rotor topped turboshaft engine
-
Schobeiri, M. T., John, J., & Pappu, K.
(1996).
Development of two-dimensional wakes within curved channels: Theoretical framework and experimental investigation. Journal of Turbomachinery.
506-518.
-
Schobeiri, M. T., & Attia, M. S.
(1996).
Advances in Nonlinear Dynamic Engine Simulation With an Example: Dynamic Performance Behavior of a Gas Turbine With One Reheat Turbine Stage and Two Combustion Chambers. v005t16a016-v005t16a016.
-
Schobeiri, M. T., & Attia, M. S.
(1996).
Advances in nonlinear dynamic engine simulation with an example: dynamic performance behavior of a gas turbine with one reheat turbine stage and two combustion chambers. American Society of Mechanical Engineers (Paper).
-
Attia, M. S., & Schobeiri, M. T.
(1995).
A New Method for the Prediction of Compressor Performance Maps Using One-Dimensional Row-by-Row Analysis
-
Attia, M. S., & Schobeiri, M. T.
(1995).
A New Method for the Prediction of Compressor Performance Maps Using One-Dimensional Row-by-Row Analysis. American Society of Mechanical Engineers (Paper).
v001t01a099-v001t01a099.
-
Schobeiri, M. T., Read, K., & Lewalle, J.
(1995).
Effect of Unsteady Wake Passing Frequency on Boundary Layer Transition, Experimental Investigation and Wavelet Analysis
-
Schobeiri, M. T., Read, K., & Lewalle, J.
(1995).
Effect of Unsteady Wake Passing Frequency on Boundary Layer Transition, Experimental Investigation and Wavelet Analysis. American Society of Mechanical Engineers (Paper).
v001t01a102-v001t01a102.
-
Schobeiri, M. T., Pappu, K., & Wright, L.
(1995).
Experimental Study of the Unsteady Boundary Layer Behavior on a Turbine Cascade
-
Schobeiri, M. T., Pappu, K., & Wright, L.
(1995).
Experimental Study of the Unsteady Boundary Layer Behavior on a Turbine Cascade. American Society of Mechanical Engineers (Paper).
v001t01a100-v001t01a100.
-
Schobeiri, M. T., Pappu, K., & John, J.
(1994).
Theoretical and experimental study of development of two-dimensional steady and unsteady wakes within curved channels. ASME -Publications- Ad.
157-173.
-
SCHOBEIRI, M. T., ATTIA, M., & LIPPKE, C.
(1994).
NONLINEAR DYNAMIC SIMULATION OF SINGLE-SPOOL AND MULTISPOOL CORE ENGINES .1. COMPUTATIONAL METHOD. Journal of Propulsion and Power: devoted to aerospace propulsion and power.
855-862.
-
Schobeiri, M. T., & John, J.
(1994).
Development of Periodic Unsteady Turbulent Wakes in a Curved Channel at Zero Streamwise Pressure Gradient. v001t01a068-v001t01a068.
-
John, J., & Schobeiri, M. T.
(1994).
Development of Two-Dimensional Turbulent Wakes in a Curved Channel at Positive Streamwise Pressure Gradient. v001t01a133-v001t01a133.
-
Schobeiri, M. T., & Radke, R. E.
(1994).
Effects of Periodic Unsteady Wake Flow and Pressure Gradient on Boundary Layer Transition Along the Concave Surface of a Curved Plate. v001t01a106-v001t01a106.
-
Schobeiri, M. T., & John, J.
(1994).
Development of periodic unsteady turbulent wakes in a curved channel at zero streamwise pressure gradient. American Society of Mechanical Engineers (Paper).
1-10.
-
John, J., & Schobeiri, M. T.
(1994).
Development of two-dimensional turbulent wakes in a curved channel at positive streamwise pressure gradient. American Society of Mechanical Engineers (Paper).
1-11.
-
Schobeiri, M. T., John, J., & Pappu, K.
(1994).
Development of two-dimensional wakes within curved channels, theoretical framework and experimental investigation. American Society of Mechanical Engineers (Paper).
1-15.
-
Schobeiri, M. T., & Radke, R. E.
(1994).
Effects of periodic unsteady wake flow and pressure gradient on boundary layer transition along the concave surface of a curved plate. American Society of Mechanical Engineers (Paper).
1-14.
-
Nikparto, A., & Schobeiri, M. T.
(2019).
A NEW PHYSICS BASED UNSTEADY TRANSITION MODEL USING THE UNIVERSAL INTERMITTENCY FUNCTION
Teaching
teaching activities
- MEEN414 Prin Of Turbomachinery Instructor
- MEEN485 Directed Studies Instructor
- MEEN491 Hnr-research Instructor
- MEEN621 Fluid Mechanics Instructor
- MEEN622 Advanc Fluid Mechanics Instructor
- MEEN646 Aerothermody Of Turbo Instructor
- MEEN684 Professional Internship Instructor
- MEEN685 Directed Studies Instructor
- MEEN689 Sptp: Tensor Analysis Instructor
- MEEN691 Research Instructor
Works By Students
chaired theses and dissertations
-
Jagannathan, Shriram (2012-02). Characterizing the Separation and Reattachment of Suction Surface Boundary Layer in Low Pressure Turbine Using Massively Parallel Large Eddy Simulations.
-
Lu, Kun (2014-12). Numerical Investigations of Flow and Film Cooling with Endwall Contouring and Blade Tip Ejection under Rotating Turbine Conditions.
-
Suryanarayanan, Arun (2010-07). Film Cooling, Heat Transfer and Aerodynamic Measurements in a Three Stage Research Gas Turbine.
-
Widyanto, Erie (2015-11). Design of Multi-Stage Compressor Using Streamline Curvature Method.
Background
education and training
- Ph.D. in Mechanical Engineering, Technical University of Darmstadt - (Darmstadt, Germany) 1978
- M.S. in Mechanical Engineering, Technical University of Darmstadt - (Darmstadt, Germany) 1970
- B.S. in Mechanical Engineering, Technical University of Darmstadt - (Darmstadt, Germany) 1967
awards and honors
- Oscar S. Wyatt, Jr. Professorship, conferred by Texas A&M University - (College Station, Texas, United States), 2010
- Alexander von Humboldt Research Prize, conferred by Alexander von Humboldt Foundation - (Bonn, Germany), 2009
- TEES Senior Fellow, conferred by Texas A&M University - (College Station, Texas, United States), 2009
- Alexander von Humboldt Fellowship, conferred by Alexander von Humboldt Foundation - (Bonn, Germany), 2006
- Fellow, conferred by American Society of Mechanical Engineers - (New York, New York, United States), 2005
- TEES Faculty Fellow, conferred by Texas A&M University - (College Station, Texas, United States), 1998
Contact
first name
- Meinhard
has last name
- Schobeiri
mailing address
-
Texas A&M University
Mechanical Engineering
3123 TAMU
College Station, TX 77843-3123
USA
Other
- tschobeiri@tamu.edu