publisher of
- A Computational Study on Crack Propagation in Bio-Inspired Lattices. Key Engineering Materials. 774:398-404. 2018
- An Efficient Method to Completely Remove Catalyst Particles from HiPCO Single Walled Carbon Nanotubes. Journal of Nano Research. 53:64-75. 2018
- A Continuum Damage Model for Functionalized Graphene Membranes Based on Atomistic Simulations. Key Engineering Materials. 754:173-176. 2017
- First-Principles and Monte Carlo Studies of Magnetocaloric Effects 2017
- Memory Loss in a Tantalum Oxide Memristor 2017
- Powder Metallurgy Ti-6Al-4V Alloy with Wrought-Like Microstructure and Mechanical Properties by Hydrogen Sintering. Key Engineering Materials. 704:3-14. 2016
- New Environmentally Friendly Solutions to Prevent Oil Pipelines Disasters. Applied Mechanics and Materials. 797:334-344. 2016
- Material Removal Rate of Zirconia in Electro Discharge Micromachining. Advanced Materials Research. 1115:20-23. 2015
- Effect of Oxygen Flow Rate on Electrical and Optical Properties of ATO Thin Films Prepared by RF Magnetron Sputtering. Key Engineering Materials. 616:178-182. 2014
- Preparation of ATO Thin Films from SPS-Derived Large Size ATO Ceramic Targets by PVD Methods. Materials Science Forum. 783-786:1973-1978. 2014
- Synthesis and Characterization of Zinc Oxide Nanowires Grown Hydrothermally on Glass Substrate. Advanced Materials Research. 787:427-431. 2013
- The Influence of Processing on Microstructural Development, Tensile Response and Fracture Behavior of Aluminum Alloy 5083. Advanced Materials Research. 410:175-186. 2012
- Simulation of Friction Stir Processing with Internally Cooled Tool 2012
- Studies on the Lapping of Polycrystalline Diamond Compact (PDC). Advanced Materials Research. 325:495-501. 2011
- Tribological Performances of Polymer-Based Coating Materials Designed for Compressor Applications 2011
- Influence of Cryomilling on Microstructure, Phase Stability and Oxidation Behavior of NiCrAlY Bond Coat in Thermal Barrier Coatings: Experimentation and Mechanistic Investigation. Materials Science Forum. 654-656:1940-1943. 2010
- Lapping of Polycrystalline Diamond Compact (PDC). Advanced Materials Research. 126-128:469-+. 2010
- Synthesis and Characterization of NiCr Self-assembled Nanorings 2010
- Effect of Ppm Level Dopant on Ductility of Ultrafine Grained Gold Wires. Materials Science Forum. 633-634:449-457. 2010
- Multi-Scale Modeling of Texture Evolution in Beryllium and Zirconium during Equal Channel Angular Extrusion 2010
- Strategies for Improving Ductility of Cryomilled Nanostructured Titanium. Materials Science Forum. 633-634:459-469. 2010
- On the Cyclic Stability and Fatigue Performance of Ultrafine-Grained Interstitial-Free Steel under Mean Stress 2008
- Strain Rate Sensitivity Studies of Cryomilled Al Alloy Performed by Nanoindentation. Materials Science Forum. 584-586:221-226. 2008
- A Ductile UFG Al Alloy via Cryomilling and Quasi-Isostatic Forging. Advanced Materials Research. 29-30:21-29. 2007
- Tensile Deformation and Fracture in a Bulk Nanostructured Al-5083/SiCp Composite at Elevated Temperatures. Advanced Materials Research. 29-30:245-248. 2007
- Characterization of high strength alloy formed by ion irradiation of metallic glasses 2007
- Fabrication of cermet nuclear fuels designed for the transmutation of transuranic isotopes 2007
- On the stability of superplastic deformation using nonlinear wavelength analysis. Key Engineering Materials. 344:47-+. 2007
- Finite element modeling of superplastic forming in the presence of back pressure. Materials Science Forum. 551-552:257-+. 2007
- Superplastic deformation of magnesium alloy AZ31 under biaxial loading condition. Materials Science Forum. 551-552:219-+. 2007
- Experimental thermal analysis of friction stir processing. Materials Science Forum. 539-543:3801-+. 2007
- Challenges in joining advanced ceramic materials: Interface formation of ceramic/metal high-temperature brazes 2005
- Correlation between the microstructure and forces generated during friction stir processing of AA5052. Materials Science Forum. 475-479:3043-3046. 2005
- Effect of state of stress on the cavitation behavior of Al 5083 superplastic material. Materials Science Forum. 475-479:2931-2936. 2005
- Constitutive modeling of deformation-induced anisotropy in superplastic materials. Materials Science Forum. 447-4:165-170. 2003
- Multi-scale analysis of failure during superplastic deformation. Materials Science Forum. 447-4:105-110. 2003
- Synthesis of Diamond Reinforced Al-Mg Nanocrystalline Composite Powder Using Ball Milling. Materials Science Forum. 416-418:213-218. 2003
- Microstructural Investigation of Grain Stability in Cryomilled Inconel 625. Materials Science Forum. 386-388:403-408. 2002
- Microstructural Investigation of Grain Stability in Cryomilled Inconel 625. Journal of Metastable and Nanocrystalline Materials. 13:403-408. 2002
- Thermally Stable Nanocrystalline Al-Mg Alloy Powders Produced by Cryomilling. Materials Science Forum. 386-388:409-414. 2002
- Thermally Stable Nanocrystalline Al-Mg Alloy Powders Produced by Cryomilling. Journal of Metastable and Nanocrystalline Materials. 13:409-414. 2002
- Mathematical Modeling of High Velocity Oxygen Fuel Thermal Spraying: An Overview. Key Engineering Materials. 197:1-26. 2001
- Synthesis and Characterization of Cryomilled SiC Reinforced Al Coatings. Materials Science Forum. 343-346:267-274. 2000
- Synthesis and Characterization of Cryomilled SiC Reinforced Al Coatings. Journal of Metastable and Nanocrystalline Materials. 8:267-274. 2000
- Thermal Stability of Nanostructured Cr3C2-NiCr Coatings. Materials Science Forum. 343-346:261-266. 2000
- Thermal Stability of Nanostructured Cr3C2-NiCr Coatings. Journal of Metastable and Nanocrystalline Materials. 8:261-266. 2000
- Reactive Spray Deposited and Thermomechanically Processed Al-Mg-Mn Alloys. Materials Science Forum. 331-337:461-466. 2000
- Synthesis and Processing of Nanostructured Cr3C2-NiCr Coatings using Mechanical Milling and HVOF. Materials Science Forum. 312-314:237-246. 1999
- Synthesis and Processing of Nanostructured Cr3C2-NiCr Coatings using Mechanical Milling and HVOF. Journal of Metastable and Nanocrystalline Materials. 2-6:237-246. 1999
- Recent research on damage development in SiC/Ti continuous fiber metal matrix composites. Key Engineering Materials. 120-:257-284. 1996
- Damping Behavior and Mechanisms in Particulate Reinforced Metal Matrix Composites Processed Using Spray Atomization and Deposition. Key Engineering Materials. 104-107:691-728. 1995
- ANISOTROPY AND TRANSIENT EFFECTS IN SUPERPLASTIC DEFORMATION. Materials Science Forum. 170-:583-588. 1994
- Continuum Modelling of Interfacial Decohesion. Solid State Phenomena. 35-36:287-302. 1993
- Advanced Aerospace Metals Requirements and Characteristics - An Overview. Key Engineering Materials. 77-78:1-38. 1992
- Spray Atomization and Deposition Processing of Particulate Reinforced Metal Matrix Composites. Key Engineering Materials. 53-55:153-159. 1991
- Chemical Trends of Schottky Barriers 1985
- Effect of pH on composition, structure and magnetic properties of electrodeposited Co-Ni alloys. Ed. 68. 2009
- Electrochemical deposition and characterization of Cd-Fe-Se thin films. Ed. 68. 2009
- Microstructural characterization of electro-deposited CdSe thin films. Ed. 68. 2009
- Preparation and microstructural studies of electrodeposited FeSe thin films. Ed. 68. 2009
- Structural and optical studies of hot wall vacuum evaporated CdTeSn thin films. Ed. 68. 2009
- A Case Study on Metal-Ceramic Interfaces: Wetting of Alumina by Molten Aluminum. Materials Science Forum. 185-189. 2018
- Influence of H-Content on Thermo-Mechanical Properties of NiAl Alloys. Materials Science Forum. 224-228. 2018
- Micromechanical Modeling of Precipitation Hardened NiTiHf. Materials Science Forum. 147-156. 2018
- Constitutive Modeling of Near-Equiatomic NiTi Shape Memory Alloys Considering Composition and Heat Treatment. Materials Science Forum. 78-84. 2016
- Effect of Cu Atoms on the Band Structure of CdTe. Materials Science Forum. 153-156. 2016
- Shockwave Response of Polymer and Polymer Nanocomposites. Materials Science Forum. 64-69. 2016
- Thermomechanical Properties of Anti-Parallel -Sheets with Bombyx mori Silk Nanostructures [Gly-Ser-Gly-Ala-Gly-Ala]n and [Gly-Ala]n. Materials Science Forum. 74-77. 2016
- Thermophysical Properties of Anti-Parallel -Sheets with Bombyx mori Silk Nanostructures [Gly-Ser-Gly-Ala-Gly-Ala]n and [Gly-Ala]n. Materials Science Forum. 70-73. 2016
- Research on Kinematics Joint Type Mobile Robot Platform for Thin Coal Seam Inspection. Applied Mechanics and Materials. 818-821. 2014
- Shape Memory Effect and Superelasticity in Single Crystals of High-Strength Ferromagnetic Alloys. Advanced Materials Research. 15-22. 2014
- Effect of Tensile Twinning on Low Temperature Shear Formability of Mg-3Al-1Zn Alloy. Advanced Materials Research. 108-113. 2014
- Prediction of Flow Stress Anisotropy and Tension Compression Asymmetry of Hot Rolled AZ31B Mg Alloy. Advanced Materials Research. 178-184. 2014
- Molecular Dynamics Simulations of Piezoelectric Materials for Energy Harvesting Applications. Materials Science Forum. 54-64. 2014
- Low-Power On-the-Fly Reconfigurable Iterative MIMO Detection and LDPC Decoding Design. Applied Mechanics and Materials. 1825-1829. 2014
- Rate Allocation Algorithm with Successive Refinement in Peer-to-Peer Networks. Applied Mechanics and Materials. 2200-2203. 2014
- Sustainability Considerations for PCC Pavement Design and Construction. Advanced Materials Research. 147-159. 2014
- Finite Element Analysis of Precipitation Effects on Ni-Rich NiTi Shape Memory Alloy Response. Materials Science Forum. 65-71. 2014
- Artificial Neural Network Model: Prediction of Mechanical Properties in Beta-Titanium Biomaterial. Applied Mechanics and Materials. 40-44. 2013
- Radio-Frequency Sensors for Nondestructive Evaluation of Materials. Advanced Materials Research. 765-+. 2013
- On Gradient Elasticity and Discrete Peridynamics with Applications to Beams and Plates. Advanced Materials Research. 145-154. 2013
- The Characteristic Parameter Estimation of Low Temperature Target Weak Signal Based on VanderPol-Duffing System. Applied Mechanics and Materials. 706-710. 2013
- An Overview of the Effect of Nb in Strengthening Castrip Steel. Materials Science Forum. 559-+. 2013
- Tissue Cutting Mechanics and Applications for Needle Core Biopsy and Guidance. Applied Mechanics and Materials. 13-22. 2013
- High Temperature Stability of Oxygen Functionalized Epitaxial Graphene/Metal Contact Interfaces. Materials Science Forum. 145-+. 2013
- Tension - Compression Asymmetry in Co49Ni21Ga30 High-Temperature Shape Memory Alloy Single Crystals. Materials Science Forum. 82-+. 2013
- Superplastic Forming Response of a Friction Stir Processed Mg Alloy Sheet - A Numerical Approach. Materials Science Forum. 192-197. 2013
- Microstructure and Electrical Properties of the (Ba1-xCax)(Ti0.96Zr0.02Sn0.02)O3 Ceramics. Advanced Materials Research. 283-286. 2013
- Size and interface coherency dependent phase transformation of niobium nanoparticles embedded in copper matrix by mechanical alloying. Advanced Materials Research. 243-248. 2013
- Sintering behavior and microwave dielectric properties of 95MCT ceramics prepared from different size powders by sol-gel method. Advanced Materials Research. 923-+. 2012
- Synthesis and characterization of nano-sized AIN powders by CRN route from a sol-gel low temperature combustion precursor. Advanced Materials Research. 644-648. 2012
- Sintering behavior and microwave dielectric properties of BaTi4O9 ceramics prepared from different size powders by sol-gel method. Advanced Materials Research. 2953-2957. 2012
- Supercapacitor Fabrication by Titanium Alloy. Advanced Materials Research. 894-+. 2012
- Advantages of Perennial Crop on Conservation of Agroecological Environment. Advanced Materials Research. 5213-5216. 2012
- Electrical Characterization of the Graphene-SiC Heterojunction. Materials Science Forum. 641-+. 2012
- Plasma-based chemical modification of epitaxial graphene. Materials Science Forum. 657-+. 2012
- Positive Temperature Coefficient SiC PiN Diodes. Materials Science Forum. 981-984. 2012
- Numerical simulation for geotechnical material of mine stope by mechanics and deformation performance. Advanced Materials Research. 1899-1902. 2012
- Simulation of Friction Stir Processing with internally cooled tool. Advanced Materials Research. 560-565. 2012
- Deformation Temperature Effects on Microstructure and Texture Evolution in High Strain Rate Extrusion-Machining of Mg-AZ31B. Materials Science Forum. 52-+. 2012
- Perennial Grain Crops: A New Option For The Future Food and Ecoagricultural Environment. Advanced Materials Research. 1463-+. 2012
- Study on Phase Structure and Electrical Properties of La-Doped (K0.5Na0.5)0.94Li0.06NbO3 Ceramics. Advanced Materials Research. 1127-1130. 2011
- Use of Cork Waste as Biosorbent for Hexavalent Chromium. Advanced Materials Research. 497-500. 2011
- Dissolution of fine gamma ' precipitates of MC2 Ni-based single-crystal superalloy in creep-fatigue regime. Advanced Materials Research. 31-+. 2011
- Growth of 4H-and 3C-SiC Epitaxial Layers on 4H-SiC Step-Free Mesas. Materials Science Forum. 119-122. 2011
- Observations on C-face SiC Graphene Growth in Argon. Materials Science Forum. 789-+. 2011
- High Air Pressure in MQL Deep Hole Drilling Workpiece Temperature. Advanced Materials Research. 1732-1736. 2011
- Fabrication and Molding Testing of the Blazed Gratings for Microoptics Applications. Key Engineering Materials. 396-400. 2010
- Nitriding of a Nb-microalloyed Thin Strip Cast Steel at 525C. Materials Science Forum. 106-+. 2010
- Orthonormality and Spectral Analysis for Robotics and Astrodynamics. Solid State Phenomena. 392-+. 2010
- EBSD Characterization of Pure Iron Deformed by ECAE. Materials Science Forum. 1995-+. 2010
- Prediction of Burr Formation in Fabricating MEMS Components by Micro End Milling. Advanced Materials Research. 247-+. 2009
- Optimal Simulation for Large Dynamic Systems. 147-153. 2009
- Evaluation of reshaping methods for multi-pass Equal Channel Angular Extrusion. Materials Science Forum. 63-67. 2008
- The effect of texture on the fatigue properties of ultrafine-grained interstitial-free steel. Materials Science Forum. 864-869. 2008
- Discrete dislocation modeling of plastic flow processes. Key Engineering Materials. 31-+. 2007
- Scratch behavior of EPR-rich TPOS. Key Engineering Materials. 557-+. 2007
- Equal channel angular extrusion (ECAE) of Ni-Ti based shape memory alloy systems. Materials Science Forum. 3195-+. 2007
- Recrystallized grain size in severely deformed pure copper. Materials Science Forum. 349-354. 2006
- Mechanical Properties of ECAE Nanocrystalline Copper and Nickel. Journal of Metastable and Nanocrystalline Materials. 183-186. 2005
- Tribological characterization of carbide-derived carbon layers on silicon carbide for dry friction applications. Key Engineering Materials. 465-468. 2004
- Discrete dislocation plasticity. Key Engineering Materials. 13-24. 2003
- Molecular Dynamics Simulations of Glass Formation and Crystallization in Binary Liquid Metals. Journal of Metastable and Nanocrystalline Materials. 181-186. 2003
- An interface crack between a functionally graded coating and a homogeneous substrate under thermo-mechanical loading. Materials Science Forum. 601-606. 2003
- A rate-dependent model for predicting damage accumulation in viscoelastic laminated composites. Key Engineering Materials. 25-34. 2002
- A thermodynamic framework for the superplastic response of materials. Materials Science Forum. 261-271. 2001
- SYNTHESIS OF NOVEL METAL PHOSPHONATE COMPLEX STRUCTURES THROUGH SOFT CHEMISTRY. Materials Science Forum. 115-124. 1994