HR job title
- Professor
- Contact Info
- 1 979 862 2623
- ORCiD
- 0000-0001-9015-3358
Liang, Hong Professor
Positions
- Affiliated faculty, Materials Science and Engineering, College of Engineering
- Professor, Mechanical Engineering, College of Engineering
- Faculty Affiliate, Energy Institute, Texas A&M Engineering Experiment Station (TEES)
- Overview
- Publications
- Research
- Teaching
- Works By Students
- Background
- Contact
- Other
- View All
Overview
Publications
selected publications
-
academic article
-
Renner, P., Jha, S., Chen, Y., Chagouri, T., Kazadi, S., Gharib, M., & Liang, H.
(2022).
Corrosion-Resistant Metal-Ceramic Composite Coatings for Tribological Applications. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME.
144(5),
-
Jha, S., Bandyopadhyay, S., Mehta, S., Yen, M., Chagouri, T., Palmer, E., & Liang, H.
(2021).
Data-Driven Predictive Electrochemical Behavior of Lignin-Based Supercapacitors via Machine Learning. ENERGY & FUELS.
-
Jha, S., Velhal, M., Stewart, W., Amin, V., Wang, E., & Liang, H.
(2021).
Additively manufactured electrodes for supercapacitors: A review. Applied Materials Today.
101220-101220.
-
Jha, S., Chen, Y., Renner, P., Likhari, R., Stewart, W., Gharib, M., & Liang, H.
(2021).
Design of Anti-frictional Ceramic-Based Composite Coatings. Journal of Materials Engineering and Performance.
1-18.
-
Mehta, S., Jha, S., Huang, D., Arole, K., & Liang, H.
(2021).
Microwave Synthesis of MnO2-Lignin Composite Electrodes for Supercapacitors. Journal of Composites Science.
5(8), 216-216.
-
Chen, Y., Simon, B. T., Opperman, L. A., Renner, P., Parkinson, D., Sinyukov, A., & Liang, H.
(2021).
Using nanoparticles to prevent enamel wear. Biotribology.
26, 100168-100168.
-
Renner, P., Chen, Y., Huang, Z., Raut, A., & Liang, H.
(2021).
Tribocorrosion Influenced Pitting of a Duplex Stainless Steel. Lubricants.
9(5), 52-52.
-
Ma, L., Chen, Y., Renner, P., Parkinson, D., Fang, A., & Liang, H.
(2021).
Synthesis and Morphological Characterization of Electroless-Deposited Ni-P Coatings on Diamond Abrasives. Lubricants.
9(2), 20-20.
-
Chen, Y., Jha, S., Raut, A., Parkinson, D. Y., Zhang, B., Elwany, A., & Liang, H.
(2021).
Tomography of 3D-Printed Lattice Structured Aluminum-Silicon Alloy and Its Deformation. 3D Printing and Additive Manufacturing.
8(1), 42-50.
-
Renner, P., Jha, S., Chen, Y., Raut, A., Mehta, S. G., & Liang, H.
(2021).
A Review on Corrosion and Wear of Additively Manufactured Alloys. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME.
143(5),
-
Lee, J., Chen, Y., Liang, H., & Kim, S.
(2021).
Temperature-dependent rheological behavior of nanofluids rich in carbon-based nanoparticles. Journal of Molecular Liquids.
325, 114659-114659.
-
Chen, Y., Renner, P. A., & Liang, H.
(2021).
Using electrochemical impendence to characterize thermal performance of working lubricants. Surface Topography Metrology and Properties.
9(3), 035035-035035.
-
Renner, P., Chen, Y., Li, M., Ma, C., Parkinson, D., & Liang, H.
(2021).
Corrosive Behavior of 3D–Printed 316L Stainless Steel. Materials Performance and Characterization.
10(1), 20200082-20200082.
-
Lee, K., Chen, E., Naugle, D., & Liang, H.
(2021).
Corrosive behavior of multi-phased quasicrystal alloys. JOURNAL OF ALLOYS AND COMPOUNDS.
851, 156862-156862.
-
Raut, A., Renner, P., Wang, R., Kazadi, S., Mehta, S., Chen, Y., & Liang, H.
(2021).
Roles of polymer brushes in biological applications. Advances in Biochips.
2(1), 12-23.
-
Mehta, S., Jha, S., & Liang, H.
(2020).
Lignocellulose materials for supercapacitor and battery electrodes: A review. RENEWABLE & SUSTAINABLE ENERGY REVIEWS.
134, 110345-110345.
-
Jha, S., Mehta, S., Chen, Y., Likhari, R., Stewart, W., Parkinson, D., & Liang, H.
(2020).
Cover Image, Volume 2, Issue 5. Energy Storage.
2(5),
-
Chen, Y., Jha, S., Raut, A., Zhang, W., & Liang, H.
(2020).
Performance Characteristics of Lubricants in Electric and Hybrid Vehicles: A Review of Current and Future Needs. Frontiers in Mechanical Engineering.
6, 571464.
-
Jha, S., Mehta, S., Chen, E., Sankar, S. S., Kundu, S., & Liang, H.
(2020).
Bimetallic tungstate nanoparticle-decorated-lignin electrodes for flexible supercapacitors. Materials Advances.
1(6), 2124-2135.
-
Chen, Y., Wang, X., Clearfield, A., & Liang, H.
(2020).
Nanoparticle α-ZrP Enhanced Superhydrophobicity. Solvent Extraction and Ion Exchange.
38(6), 645-655.
-
Lee, K., Chen, Y., Dai, W., Naugle, D., & Liang, H.
(2020).
Design of quasicrystal alloys with favorable tribological performance in view of microstructure and mechanical properties. Materials & Design.
193, 108735-108735.
-
Carlton, H., Huitink, D., & Liang, H.
(2020).
Tribochemistry as an Alternative Synthesis Pathway. Lubricants.
8(9), 87-87.
-
Chen, Y., & Liang, H.
(2020).
Tribological Evaluation of Electrical Resistance of Lubricated Contacts. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME.
142(11), 1-9.
-
Cho, H., Kim, S., Liang, H., & Kim, S.
(2020).
Electric-potential-induced uniformity in graphene oxide deposition on porous alumina substrates. Ceramics International.
46(10), 14828-14839.
-
Jha, S., Mehta, S., Chen, Y., Ma, L., Renner, P., Parkinson, D. Y., & Liang, H.
(2020).
Correction to “Design and Synthesis of Lignin-Based Flexible Supercapacitors”. ACS SUSTAINABLE CHEMISTRY & ENGINEERING.
8(25), 9597-9598.
-
Mishigdorzhiyn, U., Chen, Y., Ulakhanov, N., & Liang, H.
(2020).
Microstructure and Wear Behavior of Tungsten Hot-Work Steel after Boriding and Boroaluminizing. Lubricants.
8(3), 26-26.
-
Jha, S., Mehta, S., Chen, Y., Ma, L., Renner, P., Parkinson, D. Y., & Liang, H.
(2020).
Design and Synthesis of Lignin-Based Flexible Supercapacitors. ACS SUSTAINABLE CHEMISTRY & ENGINEERING.
8(1), 498-511.
-
Jha, S., Mehta, S., Chen, Y., Likhari, R., Stewart, W., Parkinson, D., & Liang, H.
(2020).
Design and synthesis of high performance flexible and green supercapacitors made of manganese‐dioxide‐decorated alkali lignin. Energy Storage.
2(5),
-
Jha, S., Chen, Y., Zhang, B., Elwany, A., Parkinson, D., & Liang, H.
(2020).
Influence of morphology on electrochemical and capacity performance of open-porous structured electrodes. Journal of Applied Electrochemistry.
50(2), 231-244.
-
Kim, S., Polycarpou, A. A., & Liang, H.
(2020).
Morphology and electric potential-induced mechanical behavior of metallic porous nanostructures. Friction.
8(3), 604-612.
-
Jha, S., Mehta, S., Chen, Y., Renner, P., Sankar, S. S., Parkinson, D., Kundu, S., & Liang, H.
(2020).
NiWO4 nanoparticle decorated lignin as electrodes for asymmetric flexible supercapacitors. Journal of Materials Chemistry C.
8(10), 3418-3430.
-
Huang, Y., Chakraborty, S., & Liang, H.
(2020).
Methods to probe the formation of biofilms: applications in foods and related surfaces. Analytical Methods.
12(4), 416-432.
-
Chen, E., Chen, Y., Guo, B., & Liang, H.
(2019).
Effects of surface morphological parameters on cleaning efficiency of PV panels. Solar Energy.
194, 840-847.
-
Chen, Y., Renner, P., & Liang, H.
(2019).
Dispersion of Nanoparticles in Lubricating Oil: A Critical Review. Lubricants.
7(1), 7-7.
-
Dai, W., Alkahtani, M., Hemmer, P. R., & Liang, H.
(2019).
Drag-reduction of 3D printed shark-skin-like surfaces. Friction.
7(6), 603-612.
-
Jiang, B., Chen, Y., Fang, A., Liu, B., Liu, Y., Liang, H., & Lu, X.
(2019).
Surface Stress Evolution in Through Silicon Via Wafer During a Backside Thinning Process. IEEE Transactions on Semiconductor Manufacturing.
32(4), 589-595.
-
Yue, Y., & Liang, H.
(2018).
A theoretical model to determine the capacity performance of shape-specific electrodes. Journal of Power Sources.
390, 242-248.
-
Ma, L., He, X., Fang, A., & Liang, H.
(2018).
Electrochemical Characterization of a Nickel-Phosphorus Coating on Diamond Grits. Materials Performance and Characterization.
7(3), 20170084-20170084.
-
Yue, Y., & Liang, H.
(2018).
3D Current Collectors for Lithium-Ion Batteries: A Topical Review. Small Methods.
2(8), 1800056-1800056.
-
Kundu, S., & Liang, H.
(2018).
Correction to "Microwave Synthesis of Electrically Conductive Gold Nanowires on DNA Scaffolds". LANGMUIR.
34(13), 4122-4122.
-
Yue, Y., Coburn, K., Reed, B., & Liang, H.
(2018).
Hierarchical structured nickel–copper hybrids via simple electrodeposition. Journal of Applied Electrochemistry.
48(3), 275-286.
-
Yue, Y., & Liang, H.
(2018).
Lithium-Ion Batteries: 3D Current Collectors for Lithium-Ion Batteries: A Topical Review (Small Methods 8/2018). Small Methods.
2(8), 1800041-1800041.
-
Yue, Y., Juarez-Robles, D., Mukherjee, P. P., & Liang, H.
(2018).
Superhierarchical Nickel–Vanadia Nanocomposites for Lithium Storage. ACS Applied Energy Materials.
1(5), 2056-2066.
-
Kundu, S., Yi, S., Ma, L., Chen, Y., Dai, W., Sinyukov, A. M., & Liang, H.
(2017).
Morphology dependent catalysis and surface enhanced Raman scattering (SERS) studies using Pd nanostructures in DNA, CTAB and PVA scaffolds. Dalton Trans.
46(29), 9678-9691.
-
Kundu, S., Dai, W., Chen, Y., Ma, L., Yue, Y., Sinyukov, A. M., & Liang, H.
(2017).
Shape-selective catalysis and surface enhanced Raman scattering studies using Ag nanocubes, nanospheres and aggregated anisotropic nanostructures. J Colloid Interface Sci.
498, 248-262.
-
Yue, Y., Ma, L., Sun, J., Jeong, H., & Liang, H.
(2017).
Super-hierarchical Ni/porous-Ni/V2O5 nanocomposites. RSC Adv..
7(64), 40383-40391.
-
Chen, Y., Sanchez, C., Yue, Y., de Almeida, M., González, J. M., Parkinson, D. Y., & Liang, H.
(2016).
Erratum to: Observation of yttrium oxide nanoparticles in cabbage (Brassica oleracea) through dual energy K-edge subtraction imaging. J Nanobiotechnology.
14(1), 31.
-
Kim, S., Choi, H., Polycarpou, A. A., & Liang, H.
(2016).
Morphology-influenced wetting model of nanopore structures. Friction.
4(3), 249-256.
-
Chen, Y., Sanchez, C., Yue, Y., de Almeida, M., González, J. M., Parkinson, D. Y., & Liang, H.
(2016).
Observation of yttrium oxide nanoparticles in cabbage (Brassica oleracea) through dual energy K-edge subtraction imaging. J Nanobiotechnology.
14(1), 23.
-
Choi, H., & Liang, H.
(2016).
Wettability and spontaneous penetration of a water drop into hydrophobic pores. J Colloid Interface Sci.
477, 176-180.
-
Kim, S., Polycarpou, A. A., & Liang, H.
(2015).
Electrical-potential induced surface wettability of porous metallic nanostructures. Applied Surface Science.
351, 460-465.
-
Xiao, H., Dai, W., Kan, Y., Clearfield, A., & Liang, H.
(2015).
Amine-intercalated α-zirconium phosphates as lubricant additives. Applied Surface Science.
329, 384-389.
-
Zhou, Y., Perkins, L. A., Wang, G., Zhou, D., & Liang, H.
(2015).
Bio-Environment-Induced Degradation and Failure of Internal Fixation Implants. J Funct Biomater.
6(4), 1012-1020.
-
Sanchez, C. J., Chiu, C., Zhou, Y., González, J. M., Vinson, S. B., & Liang, H.
(2015).
Locomotion control of hybrid cockroach robots. J R Soc Interface.
12(105), 20141363-20141363.
-
He, X., Xiao, H., Fevzi Ozaydin, M., Balzuweit, K., & Liang, H.
(2015).
Low-temperature boriding of high-carbon steel. SURFACE & COATINGS TECHNOLOGY.
263, 21-26.
-
Reeks, J., & Liang, H.
(2015).
Materials and Their Failure Mechanisms in Total Disc Replacement. Lubricants.
3(2), 346-364.
-
Xiao, H., Kim, S., He, X., Zhou, D., Li, C., & Liang, H.
(2014).
Friction pair evaluation of cartilage–diamond for partial joint repair. CARBON.
80(1), 551-559.
-
Chen, Y., & Liang, H.
(2014).
Applications of quantum dots with upconverting luminescence in bioimaging. J Photochem Photobiol B.
135, 23-32.
-
Xiao, H., Ariyasinghe, N., He, X., & Liang, H.
(2014).
Tribological evaluation of porcine skin. Colloids Surf B Biointerfaces.
116, 734-738.
-
Kim, S., Polycarpou, A. A., & Liang, H.
(2013).
Active control of surface forces via nanopore structures. APL Materials.
1(3), 032118-032118.
-
Konomi, B. A., Dhavala, S. S., Huang, J. Z., Kundu, S., Huitink, D., Liang, H., Ding, Y. u., & Mallick, B. K.
(2013).
Bayesian object classification of gold nanoparticles. Ann Appl Stat.
7(2), 640-668.
-
He, X., Joo, S., Xiao, H., & Liang, H.
(2013).
Boron-Based Nanoparticles for Chemical-Mechanical Polishing of Copper Films. ECS Journal of Solid State Science and Technology.
2(1), P20-P25.
-
Xiao, H., Wang, K. e., Fox, G., Belin, M., Fontaine, J., & Liang, H.
(2013).
Spatial evolution of friction of a textured wafer surface. Friction.
1(1), 92-97.
-
He, X., Chen, Y., Zhao, H., Sun, H., Lu, X., & Liang, H.
(2013).
Y2O3 nanosheets as slurry abrasives for chemical-mechanical planarization of copper. Friction.
1(4), 327-332.
-
Ounaies, Z., & Liang, H.
(2009).
Acquisition of a Combined Mechano-Electro-Chemical Characterization Equipment for Advanced Nanocomposites Research and Education
-
Ounaies, Z., Liang, H., Krishnamoorti, R., & Radovic, M.
(2008).
Acquisition of a Combined Mechano-Electro-Chemical Characterization Equipment for Advanced Nanocomposites Research and Education
-
Lee, H., Cooper, R., Wang, K. e., & Liang, H.
(2008).
Nano-Scale Characterization of a Piezoelectric Polymer (Polyvinylidene Difluoride, PVDF). Sensors.
8(11), 7359-7368.
-
Ribeiro, R., Ganguly, P., Darensbourg, D., Usta, M., Ucisik, A. H., & Liang, H.
(2005).
Bio-mimetic study of novel materials for joint replacements. ACTIVE POLYMERS.
898, 0898-l05-19.
-
Liang, H., Le Mogne, T., & Martin, J.
(2002).
Interfacial transfer between copper and polyurethane in chemical-mechanical polishing. Journal of Electronic Materials.
31(8), 872-878.
-
Shi, B., Lu, X., Zou, R., Luo, J., Chen, D., Liang, H., & Huang, L.
(2001).
Observations of the topography and friction properties of macromolecular thin films at the nanometer scale. Wear.
251(1-12), 1177-1182.
-
Liang, H., Martin, J., & Lee, R.
(2001).
Influence of oxides on friction during Cu CMP. Journal of Electronic Materials.
30(4), 391-395.
-
Liang, H., Estragnat, E., Lee, J., Bahten, K., & McMullen, D.
(2001).
Mechanisms of post-CMP cleaning. ACTIVE POLYMERS.
671, M7.4.1-M7.4.8.
-
Liang, H., Martin, J. M., & Vacher, B.
(2000).
Chemical wear of Cu CMP. ACTIVE POLYMERS.
613.
-
Liang, H., & Jahanmir, S.
(1995).
Boric Acid as an Additive for Core-Drilling of Alumina. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME.
117(1), 65-73.
-
Liang, H., Fischer, T. E., Nauer, M., & Carry, C.
(1993).
Effect of Grain Boundary Impurities on the Mechanical and Tribological Properties of Zirconia Surfaces. Journal of the American Ceramic Society.
76(2), 325-329.
-
Renner, P., Jha, S., Chen, Y., Chagouri, T., Kazadi, S., Gharib, M., & Liang, H.
(2022).
Corrosion-Resistant Metal-Ceramic Composite Coatings for Tribological Applications. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME.
144(5),
-
chapter
-
Zhou, Y., Chen, Y., Rocha, A., Sanchez, C. J., & Liang, H.
(2020).
Assessment of Toxicity of Nanoparticles Using Insects as Biological Models. Methods Mol Biol.
Methods in Molecular Biology.
(pp. 269-279).
Springer US.
-
Dai, W., Xiao, H., Totten, G. E., & Liang, H.
(2019).
Chapter 46 | Lubrication Fundamentals. Fuels and Lubricants Handbook: Technology, Properties, Performance, and Testing, 2nd Edition.
(pp. 1565-1630).
ASTM International.
-
Dai, W., & Liang, H.
(2017).
Properties of Liquid Lubricants. Friction, Lubrication, and Wear Technology.
(pp. 118-134).
ASM International.
-
Liang, H.
(2013).
Chemical-Mechanical Polish and Electrochemical-Mechanical Polishing. Encyclopedia of Tribology.
(pp. 373-376).
Springer US.
-
Joo, S., & Liang, H.
(2013).
Secondary Ion Mass Spectroscopy (SIMS). Encyclopedia of Tribology.
(pp. 2989-2994).
Springer US.
-
Liang, H., & Cooper, R.
(2013).
Tribological Characteristics of Insects’ Skin. Encyclopedia of Tribology.
(pp. 3771-3777).
Springer US.
-
Peng, L., Zhang, H., Hemmer, P., & Liang, H.
(2012).
Laser-Assisted Scanning Probe Alloying Nanolithography (LASPAN). Scanning Probe Microscopy in Nanoscience and Nanotechnology 3.
(pp. 3-21).
Springer Berlin Heidelberg.
-
Kar, P., Kundu, S., Radovic, M., & Liang, H.
(2011).
Tribofilm Formation using Ti2AIC Material. Ceramic Transactions.
Advances in Nanomaterials and Nanostructures.
(pp. 185-193).
-
Landolt, D., Mischler, S., Virtanen, S., Maurice, V., Marcus, P., Kato, K., ... Richard, C.
(2011).
Contributor contact details. Tribocorrosion of Passive Metals and Coatings.
(pp. xi-xv).
Elsevier.
-
Peng, L., Lee, H., & Liang, H.
(2010).
Scanning Probe Alloying Nanolithography. Scanning Probe Microscopy in Nanoscience and Nanotechnology.
(pp. 813-832).
Springer Berlin Heidelberg.
-
Lee, H., Wang, K. e., Jee, T., & Liang, H.
(2009).
Atomic Force Microscopic Study of Piezoelectric Polymers. Applied Scanning Probe Methods XIII.
(pp. 137-152).
Springer Berlin Heidelberg.
-
Zhou, Y., Chen, Y., Rocha, A., Sanchez, C. J., & Liang, H.
(2020).
Assessment of Toxicity of Nanoparticles Using Insects as Biological Models. Methods Mol Biol.
Methods in Molecular Biology.
(pp. 269-279).
Springer US.
-
conference paper
-
Guruzu, S., Xu, G., & Liang, H.
(2018).
Friction-Induced Nucleation of Nanocrystals. 45-54.
-
He, X., Chiu, C., Esmacher, M. J., & Liang, H.
(2013).
Nanostructured photocatalytic coatings for corrosion protection and surface repair. SURFACE & COATINGS TECHNOLOGY.
320-327.
-
Jingang Yi, .., & Hong Liang, ..
(2008).
A PVDF-Based Deformation and Motion Sensor: Modeling and Experiments. IEEE Sens J.
384-391.
-
Totten, G. E., De Campos Franceschini Canale, L., & Liang, H.
(2005).
HYDRAULIC CAVITATION FROM A SONOMATERIALS SCIENCE PERSPECTIVE: A REVIEW. SAE Technical Paper Series.
-
Prasad, V., Bloomfield, M. O., Richards, D. F., Liang, H., & Cale, T. S.
(2002).
Modeling and simulation of plasma enhanced processing for integrated circuit fabrication. Vacuum.
443-455.
-
Shi, B., Lu, X., Luo, J., Chen, D., & Liang, H.
(2001).
Frictional properties of molecular thin films. Surface and Interface Analysis.
283-285.
-
Xu, G. H., & Liang, H.
(2001).
Tribological behavior of copper chemical-mechanical polishing. 851-854.
-
Guruzu, S., Xu, G., & Liang, H.
(2018).
Friction-Induced Nucleation of Nanocrystals. 45-54.
Research
principal investigator on
- Full Scale, High Temperature and High Pressure Industry Test-bed for Increased Horizontal and Vertical Drilling Efficiency and Reliability awarded by Qatar Foundation - (Doha, Qatar) 2018 - 2021
- IPA Assignment Agreement for Hong Liang awarded by National Institute of Standards and Technology - (Gaithersburg, Maryland, United States) 2018 - 2019
co-principal investigator on
awards and honors
- IIE Transactions Award, conferred by Institute of Industrial Engineers - (Hong Kong, Hong Kong, China), 2014
- Fellow, conferred by American Society of Mechanical Engineers - (New York, New York, United States), 2009
- Fellow, conferred by Society of Tribologists and Lubrication Engineers - (Park Ridge, Illinois, United States), 2007
- Faculty Early Career Development (CAREER) Program, conferred by National Science Foundation - (Arlington, Virginia, United States), 2004
- Faculty Early Career Development (CAREER) Program, conferred by National Science Foundation - (Arlington, Virginia, United States), 2003
- CMPUG Poster Competition 3rd Prize, conferred by American Vacuum Society - (New York, New York, United States), 2000
Teaching
teaching activities
- ITDE691 Research Instructor
- MEEN460 Corrosion Engineering Instructor
- MEEN475 Materials In Design Instructor
- MEEN485 Directed Studies Instructor
- MEEN491 Hnr-research Instructor
- MEEN616 Surface Science Instructor
- MEEN660 Corrosion Engineering Instructor
- MEEN684 Professional Internship Instructor
- MEEN684 Professional Internship Instructor
- MEEN684 Professional Internship Instructor
- MEEN685 Directed Studies Instructor
- MEEN691 Research Instructor
- MSEN616 Surface Science Instructor
- MSEN684 Professional Internship: In-ab Instructor
- MSEN685 Directed Studies Instructor
- MSEN691 Research Instructor
Works By Students
chaired theses and dissertations
-
Nudo, Nicholas (2011-05). Mechanical Evaluation of Electronic Properties of Materials.
-
Paluri, Rajeshwari S. Lakshmi (2011-08). Development and Characterization of Novel Alumina Based Ceramic Matrix Composites for Energy Efficient Sliding Applications.
-
Patel, Sagar Devraj (2016-05). Grain Orientation Texture Control and Its Effects on the Hardness and Abrasion Resistance of Sintered Carbides.
-
Reeks, John Mason (2016-05). Design and Synthesis of a Novel Nacreous-Enhanced Composite for Improved Fixation of Lumbar Total Disc Replacement.
-
Zhou, Yan (2014-05). Characterization of Carbon-Based Biomaterials.
Background
education and training
- National Institute of Standards and Technology - (Gaithersburg, Maryland, United States) , Postdoctoral Training
- Ph.D. in Materials Science & Engineering, Stevens Institute of Technology - (Hoboken, New Jersey, United States) 1992
- M.S. in Materials Science & Engineering, Stevens Institute of Technology - (Hoboken, New Jersey, United States) 1987
Contact
first name
- Hong
has last name
- Liang
mailing address
-
Texas A&M University
Mechanical Engineering
3123 TAMU
College Station, TX 77843-3123
USA
Other
- hliang@tamu.edu