selected publications academic article Vaughan, M. W., Karayan, A. I., Srivastava, A., Mansoor, B., Seitz, J. M., Eifler, R., ... Maier, H. J. (2020). The effects of severe plastic deformation on the mechanical and corrosion characteristics of a bioresorbable Mg-ZKQX6000 alloy. MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS. 115, 111130-111130. Banire, B., Al-Thani, D., Qaraqe, M., Khowaja, K., & Mansoor, B. (2020). The Effects of Visual Stimuli on Attention in Children With Autism Spectrum Disorder: An Eye-Tracking Study. IEEE Access. 8, 225663-225674. Aljihmani, L., Alic, L., Boudjemline, Y., Hijazi, Z. M., Mansoor, B., Serpedin, E., & Qaraqe, K. (2019). Magnesium-Based Bioresorbable Stent Materials: Review of Reviews. Journal of Bio and Tribo Corrosion. 5(1), 26. (2018). The effect of layer thickness ratio on the plastic deformation mechanisms of nanoindented Ti/TiN nanolayered composite. COMPUTATIONAL MATERIALS SCIENCE. 154, 488-498. (2018). Improvement in the mechanical properties of eutectic Sn58Bi alloy by 0.5 and 1 wt% Zn addition before and after thermal aging. Journal of Alloys and Compounds. 765, 1243-1252. (2018). Bifurcation in deformation mechanism to overcome strength-ductility paradox in metal-ceramic multilayer thin-films. Applied Physics Letters. 113(10), 101902-101902. (2018). Aluminum foam sandwich with density-graded open-cell core: Compressive and flexural response. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. 731, 220-230. Makki, M., Ayoub, G., Abdul-Hameed, H., Zaïri, F., Mansoor, B., Naït-Abdelaziz, M., & Ouederni, M. (2017). Mullins effect in polyethylene and its dependency on crystal content: A network alteration model. J Mech Behav Biomed Mater. 75, 442-454. Yang, W., Ayoub, G., Salehinia, I., Mansoor, B., & Zbib, H (2017). Multiaxial tension/compression asymmetry of Ti/TiN nano laminates: MD investigation. ACTA MATERIALIA. 135, 348-360. Mungole, T., Mansoor, B., Ayoub, G., & Field, D. P (2017). Bifurcation in deformation behavior of Cu and Ta by accumulative roll-bonding at high temperature. Scripta Materialia. 136, 87-91. Erdeniz, D., Nasim, W., Malik, J., Yost, A. R., Park, S., De Luca, A., ... Dunand, D. C. (2017). Corrigendum to Effect of vanadium micro-alloying on the microstructural evolution and creep behavior of Al-Er-Sc-Zr-Si alloys [Acta Mater. 124 (2017) 501512]. ACTA MATERIALIA. 133, 440-440. Dorbane, A., Ayoub, G., Mansoor, B., Hamade, R. F., & Imad, A (2017). Effect of Temperature on Microstructure and Fracture Mechanisms in Friction Stir Welded Al6061 Joints. Journal of Materials Engineering and Performance. 26(6), 2542-2554. Erdeniz, D., Nasim, W., Malik, J., Yost, A. R., Park, S., De Luca, A., ... Dunand, D. C. (2017). Effect of vanadium micro-alloying on the microstructural evolution and creep behavior of Al-Er-Sc-Zr-Si alloys. ACTA MATERIALIA. 124, 501-512. Yang, W., Ayoub, G., Salehinia, I., Mansoor, B., & Zbib, H (2017). Deformation mechanisms in Ti/TiN multilayer under compressive loading. ACTA MATERIALIA. 122, 99-108. Sarwar, J., & Mansoor, B (2016). Characterization of thermophysical properties of phase change materials for non-membrane based indirect solar desalination application. Energy Conversion and Management. 120, 247-256. Rodriguez, A. K., Ayoub, G. A., Mansoor, B., & Benzerga, A. A. (2016). Effect of strain rate and temperature on fracture of magnesium alloy AZ31B. ACTA MATERIALIA. 112, 194-208. AlMarzooqi, F. A., Bilad, M. R., Mansoor, B., & Arafat, H. A (2016). A comparative study of image analysis and porometry techniques for characterization of porous membranes. Journal of Materials Science. 51(4), 2017-2032. Shunmugasamy, V. C., Mansoor, B., & Gupta, N (2016). Cellular Magnesium Matrix Foam Composites for Mechanical Damping Applications. Journal of Metals. 68(1), 279-287. Dorbane, A., Mansoor, B., Ayoub, G., Shunmugasamy, V. C., & Imad, A (2016). Mechanical, microstructural and fracture properties of dissimilar welds produced by friction stir welding of AZ31B and Al6061. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. 651, 720-733. Dorbane, A., Ayoub, G., Mansoor, B., Hamade, R. F., Kridli, G., Shabadi, R., & Imad, A (2016). Microstructural observations and tensile fracture behavior of FSW twin roll cast AZ31 Mg sheets. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. 649, 190-200. Mansoor, B., Nassar, H., Shunmugasamy, V. C., & Khraisheh, M. K (2015). Three dimensional forming of compressed open-cell metallic foams at elevated temperatures. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. 628, 433-441. Young, J. P., Ayoub, G., Mansoor, B., & Field, D. P (2015). The effect of hot rolling on the microstructure, texture and mechanical properties of twin roll cast AZ31Mg. Journal of Materials Processing Technology. 216, 315-327. Mahmoud, K. A., Mansoor, B., Mansour, A., & Khraisheh, M (2015). Functional graphene nanosheets: The next generation membranes for water desalination. Desalination. 356, 208-225. Dorbane, A., Ayoub, G., Mansoor, B., Hamade, R., Kridli, G., & Imad, A (2015). Observations of the mechanical response and evolution of damage of AA 6061-T6 under different strain rates and temperatures. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. 624, 239-249. Khan, M., Li, J., Cao, W., Mansoor, B., & Rehman, F (2014). Effect of oxygen vacancy on the improved photocatalytic activity of Cr-doped TiO2. INTERNATIONAL JOURNAL OF MODERN PHYSICS B. 28(25), 1450170-1450170. (2013). Photo-regenerable multi-walled carbon nanotube membranes for the removal of pharmaceutical micropollutants from water. Environ Sci Process Impacts. 15(8), 1582-1589. (2013). Effect of dry-out on the fouling of PVDF and PTFE membranes under conditions simulating intermittent seawater membrane distillation (SWMD). JOURNAL OF MEMBRANE SCIENCE. 438, 126-139. Saffarini, R. B., Mansoor, B., Thomas, R., & Arafat, H. A. (2013). Effect of temperature-dependent microstructure evolution on pore wetting in PTFE membranes under membrane distillation conditions. JOURNAL OF MEMBRANE SCIENCE. 429, 282-294. (2013). Thermo-mechanical and metallurgical aspects in friction stir processing of AZ31 Mg alloy—A numerical and experimental investigation. Journal of Materials Processing Technology. 213(2), 279-290. (2012). Microstructure and tensile behavior of a friction stir processed magnesium alloy. ACTA MATERIALIA. 60(13-14), 5079-5088. (2009). Microstructure and porosity in thixomolded Mg alloys and minimizing adverse effects on formability. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. 512(1-2), 10-18. (2008). New process for high strength/weight net-shape auto and aero components from Mg sheet. ADVANCED MATERIALS & PROCESSES. 166(4), 29-29. chapter Mansoor, B., Dorbane, A., Ayoub, G., & Imad, A (2015). Friction Stir Welding of AZ31B Magnesium Alloy with 6061-T6 Aluminum Alloy: Influence of Processing Parameters on Microstructure and Mechanical Properties. Friction Stir Welding and Processing VIII. (pp. 259-266). Springer International Publishing. conference paper Khan, M., Cao, W., & Mansoor, B (2015). Cationic (V, Y)-codoped TiO2with Enhanced Visible Light Induced Photocatalytic Activity for Photoelectrochemical Applications. 325-333. Dorbane, A., Ayoub, G., Mansoor, B., Hamade, R., Kridli, G., & Imad, A (2015). Mechanical Response and Evolution of Damage of Al6061-T6 Under Different Strain Rates and Temperatures. 259-265. Alaeddine, N., Kakosimos, K., Guo, B., & Mansoor, B. (2014). LEADING EDUCATIONAL INNOVATION THROUGH IMPLEMENTATION. EDULEARN Proceedings. 7322-7328. Albakri, M., Mansoor, B., Albakri, A., & Khraisheh, M. (2012). Superplastic Forming Response of a Friction Stir Processed Mg Alloy Sheet – A Numerical Approach. EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS. 192-197. Mansoor, B., Decker, R. F., Kulkarni, S., LeBeau, S. E., & Khraisheh, M. K. (2012). The Effect of Friction Stir Processing on Microstructure and Tensile Behavior of Thixomolded AZ91 Magnesium Alloy. MAGNESIUM TECHNOLOGY 2006, PROCEEDINGS. 391-396. (2012). Simulation of Friction Stir Processing with Internally Cooled Tool. ADVANCED ENGINEERING MATERIALS II, PTS 1-3. 560-565. (2010). HIGH STRENGTH ZK60 MG PLATE PRODUCED BY GRAIN REFINEMENT AND PRECIPITATION DURING ALTERNATE BIAXIAL REVERSE CORRUGATION (ABRC) PROCESS AND FRICTION STIR PROCESS (FSP). MAGNESIUM TECHNOLOGY 2006, PROCEEDINGS. 579-585. On the Effect of Temperature on the Tensile Behaviour of Open-cell Aluminium Alloy Foams. 327-332.
principal investigator on 4D+ Printing â Form and Function Design in Shape Memory Alloys awarded by Qatar National Research Fund - (Doha, Qatar) 2020 - 2023 Additive Manufacturing of Concrete for Sustainable Construction using Locally Developed Materials awarded by Qatar National Research Fund - (Doha, Qatar) 2020 - 2023 Robust Field Capable Assessment of Surface Modified Nickel Superalloys awarded by Qatar Foundation - (Doha, Qatar) 2019 - 2022 Durability of Semicrystalline Polymers under Extreme Environments: Characterization and Modeling awarded by Qatar National Research Fund - (Doha, Qatar) 2015 - 2018 Multiscale modeling and characterization of advanced interface materials for high energy and corrosive environments awarded by Qatar National Research Fund - (Doha, Qatar) 2015 - 2018 Novel aluminum alloys for very high temperature applications awarded by Qatar National Research Fund - (Doha, Qatar) 2015 - 2018
teaching activities MEEN222 Materials Science Instructor MEEN360 Mtls & Mfg Select In Dsn Instructor MEEN361 Mtls & Mfg In Design Lab Instructor MEEN364 Dynamic Syst And Control Instructor MEEN475 Materials In Design Instructor MEEN485 Directed Studies Instructor MEEN491 Hnr-research Instructor MEEN684 Professional Internship Instructor MEEN685 Directed Studies Instructor MEEN691 Research Instructor MSEN684 Professional Internship: In-ab Instructor MSEN691 Research Instructor
education and training Ph.D. in Materials Science and Engineering, University of Michigan-Ann Arbor - (Ann Arbor, Michigan, United States) 2010 M.S. in Mechanical Engineering, University of Michigan-Ann Arbor - (Ann Arbor, Michigan, United States) 2006 B.S.E. in Mechanical Engineering, University of Engineering and Technology Lahore - (Lahore, Pakistan) 2002
awards and honors Best Professor of Mechanical Engineering, conferred by Texas A&M University at Qatar - (Doha, Qatar), 2013