Journal of Engineering for Gas Turbines and Power
Journal
-
- Overview
-
- Identity
-
- View All
-
Overview
publication venue for
-
Ignition of Various Lubricating Oil Compositions Using a Shock Tube.
146.
2024
-
CO Laser Absorption Measurements During Syngas Combustion at High Pressure.
145.
2023
-
Experimental Force Coefficients for a Fully-Partitioned Pocket Damper Seal and Comparison to Other Two Seal Types.
145.
2023
-
Stability of a Rotor Partially Filled With Fluid: Test Facility and Experimental Results.
145.
2023
-
High-Pressure Laminar Flame Speeds and Markstein Lengths of Syngas Flames Diluted in Carbon Dioxide and Helium.
145.
2023
-
Effect of Pad Material, Copper Versus Steel, on the Performance of a Tilting Pad Journal Bearing: Measurements and Predictions.
144.
2022
-
An Analytical Two-Phase Flow Model for Prediction of Leakage in Wet Gas Labyrinth Seals and Pocket Damper Seals. Is Simplicity Still Desired?.
143.
2021
-
High-Temperature Ignition Kinetics of Gas Turbine Lubricating Oils.
143.
2021
-
Measurements to Quantify the Effect of a Reduced Flow Rate on the Performance of a Tilting Pad Journal Bearing With Flooded Ends.
143.
2021
-
On the Experimental Dynamic Force Performance of a Squeeze Film Damper Supplied Through a Check Valve and Sealed With O-Rings.
143.
2021
-
Additively Manufactured Compliant Hybrid Gas Thrust Bearing for Supercritical Carbon Dioxide Turbomachinery: Experimental Evaluation and Fluid-Structure Model Predictions.
143.
2021
-
Auto-Ignition of Gas Turbine Lubricating Oils in a Shock Tube Using Spray Injection.
143.
2021
-
Laminar Flame Speed Measurements of Kerosene-Based Fuels Accounting for Uncertainties in Mixture Average Molecular Weight.
143.
2021
-
Novel Approach for Optical Characterization of Thrust Collar Lubricated Area: Experimental and Numerical Results.
143.
2021
-
A Thermo-Hydrodynamic Model for Thermal Energy Flow Management in A (Semi) Floating Ring Bearing System for Automotive Turbochargers.
143.
2021
-
On the Effect of the Gap of End Seals on Force Coefficients of a Test Integral Squeeze Film Damper: Experiments and Predictions.
143.
2021
-
Gas Labyrinth Seals: Improved Prediction of Leakage in Gas Labyrinth Seals Using an Updated Kinetic Energy Carry-Over Coefficient.
142.
2020
-
Squeeze Film Damper Suppression of Thermal Bow-Morton Effect Instability.
142.
2020
-
On the Effect of Supplied Flow Rate to the Performance of a Tilting-Pad Journal Bearing-Static Load and Dynamic Force Measurements.
142.
2020
-
Effects of Clearance on the Performance of a Labyrinth Seal Under Wet-Gas Conditions.
142.
2020
-
Experiments With a Rotor-Hybrid Gas Bearing System Undergoing Maneuver Loads From Its Base Support.
142.
2020
-
Discussion of "Non-Axisymmetric Flows and Rotordynamic Forces in an Eccentric Shrouded Centrifugal Compressor-Part 1: Measurement" (Song, J., Kim, S., Park, T. C., Cha, B.-J., Lim, D. H., Hong, J. S., Lee, T. W., and Song, S. J., ASME J. Eng. Gas Turbines Power, 141(11), p. 111014).
142.
2020
-
Discussion of "Non-Axisymmetric Flows and Rotordynamic Forces in an Eccentric Shrouded Centrifugal Compressor-Part 2: Analysis" (Song, J., and Song S. J., ASME J. Eng. Gas Turbines Power, 141(11), p. 111015).
142.
2020
-
A Computational Model for the Analysis of the Static Forced Performance of Self-Equalizing Tilting Pad Thrust Bearings.
142.
2020
-
CH Kinetics Measurements and Their Importance for Modeling Prompt NOx Formation in Gas Turbines.
142.
2020
-
Simulation, Test, and Mitigation of 1/2x Forward Whirl Following Rotor Drop Onto Auxiliary Bearings.
142.
2020
-
Preswirl and Mixed-Flow (Mainly Liquid) Effects on Rotordynamic Performance of a Long (L/D=0.75) Smooth Seal.
142.
2020
-
A Study for Rotordynamic and Leakage Characteristics of a Long-Honeycomb Seal With Two-Phase, Mainly Air Mixtures.
142.
2020
-
A Study on the Leakage and Rotordynamic Coefficients of a Long-Smooth Seal With Laminar-Two-Phase, Mainly-Oil Mixtures.
142.
2020
-
Laminar Flame Speed Experiments of Alternative Liquid Fuels.
142.
2020
-
Leakage and Force Coefficients of a Grooved Wet (Bubbly Liquid) Seal for Multiphase Pumps and Comparisons With Prior Test Results for a Three Wave Seal.
142.
2020
-
A Study on the Leakage and Rotordynamic Performance of a Long Labyrinth Seal Under Mainly Air Conditions.
141.
2019
-
Effect of Pad and Liner Material Properties on the Static Load Performance of a Tilting Pad Thrust Bearing.
141.
2019
-
Experimental Study of the Static and Dynamic Characteristics of a Long (L/D=0.75) Labyrinth Annular Seal Operating Under Two-Phase (Liquid/Gas) Conditions.
141.
2019
-
Leakage and Dynamic Force Coefficients of a Pocket Damper Seal Operating Under a Wet Gas Condition: Tests Versus Predictions.
141.
2019
-
Leakage and Cavity Pressures in an Interlocking Labyrinth Gas Seal: Measurements Versus Predictions.
141.
2019
-
Pump Grooved Seals: A Computational Fluid Dynamics Approach to Improve Bulk-Flow Model Predictions.
141.
2019
-
Measurements Versus Predictions for a Hybrid (Hydrostatic Plus Hydrodynamic) Thrust Bearing for a Range of Orifice Diameters.
141.
2019
-
Static and Dynamic Coefficient Measurements for a Thrust Collar Used in an Integrally Geared Compressor.
141.
2019
-
NOx-Hydrocarbon Kinetics Model Validation Using Measurements of H2O in Shock-Heated CH4/C2H6 Mixtures With NO2 as Oxidant.
141.
2019
-
Leakage and Rotordynamic Force Coefficients of A Three-Wave (Air in Oil) Wet Annular Seal: Measurements and Predictions.
141:032503.
2019
-
A Thermoelastohydrodynamic Analysis for the Static Performance of High-Speed-Heavy Load Tilting-Pad Journal Bearing Operating in the Turbulent Flow Regime and Comparisons to Test Data.
141.
2019
-
Compliant Hybrid Gas Bearing Using Modular Hermetically Sealed Squeeze Film Dampers.
141.
2019
-
Dynamic Characterization of a Novel Externally Pressurized Compliantly Damped Gas-Lubricated Bearing With Hermetically Sealed Squeeze Film Damper Modules.
141.
2019
-
Experimental Force Coefficients for Two Sealed Ends Squeeze Film Dampers (Piston Rings and O-Rings): An Assessment of Their Similarities and Differences.
141.
2019
-
Hermetically Sealed Squeeze Film Damper for Operation in Oil-Free Environments.
141.
2019
-
Clearance Effects on Rotordynamic Performance of a Long Smooth Seal With Two-Phase, Mainly-Air Mixtures.
141.
2019
-
On the Design, Manufacture, and Premature Failure of a Metal Mesh Foil Thrust Bearing-How Concepts That Work on Paper, Actually Do Not.
140.
2018
-
Kinematics of an Articulated Connecting Rod and Its Effect on Simulated Compression Pressures and Port Timings.
140:092803.
2018
-
Thermodynamic Considerations Related to Knock: Results From an Engine Cycle Simulation.
140:092805.
2018
-
Comparison of Diesel Engine Efficiency and Combustion Characteristics Between Different Bore Engines.
140:102807.
2018
-
Lateral Equilibrium Position Analysis Program With Applications to Electric Submersible Pumps.
140.
2018
-
Static Load Performance of a Water-Lubricated Hydrostatic Thrust Bearing.
140.
2018
-
A Flow Starvation Model for Tilting Pad Journal Bearings and Evaluation of Frequency Response Functions: A Contribution Toward Understanding the Onset of Low Frequency Shaft Motions.
140.
2018
-
On the Influence of Lubricant Supply Conditions and Bearing Configuration to the Performance of (Semi) Floating Ring Bearing Systems for Turbochargers.
140:032503.
2018
-
Dynamic and Thermal Analysis of Rotor Drop on Sleeve Type Catcher Bearings in Magnetic Bearing Systems.
140:022501.
2018
-
A Computational Fluid Dynamics Modified Bulk Flow Analysis for Circumferentially Shallow Grooved Liquid Seals.
140:012504.
2018
-
Leakage, Drag Power, and Rotordynamic Force Coefficients of an Air in Oil (Wet) Annular Seal.
140:012505.
2018
-
On the Force Coefficients of a Flooded, Open Ends Short Length Squeeze Film Damper: From Theory to Practice (and Back).
140:012502.
2018
-
CO and H2O Time-Histories in Shock-Heated Blends of Methane and Ethane for Assessment of a Chemical Kinetics Model.
139:121507.
2017
-
Experimental Study of the Static and Dynamic Characteristics of a Long Smooth Seal With Two-Phase, Mainly Air Mixtures.
139:122504.
2017
-
Including Housing-Casing Fluid in a Lateral Rotordynamics Analysis on Electric Submersible Pumps.
139.
2017
-
Simulation of Combustion Recession After End-of-Injection at Diesel Engine Conditions.
139:102804.
2017
-
On the Predicted Effect of Angular Misalignment on the Performance of Oil Lubricated Thrust Collars in Integrally Geared Compressors.
139:042503.
2017
-
A Water-Lubricated Hybrid Thrust Bearing: Measurements and Predictions of Static Load Performance.
139:022506.
2017
-
Solid Element Rotordynamic Modeling of a Rotor on a Flexible Support Structure Utilizing Multiple-Input and Multiple-Output Support Transfer Functions.
139:012503.
2017
-
Response of a Squeeze Film Damper-Elastic Structure System to Multiple and Consecutive Impact Loads.
138:122504.
2016
-
The Impact of Pad Flexibility on the Rotordynamic Coefficients of Tilting-Pad Journal Bearings.
138:082501.
2016
-
Transient Response of a Short-Length (L/D=0.2) Open-Ends Elastically Supported Squeeze Film Damper: Centered and Largely Off-Centered Whirl Motions.
138:122503.
2016
-
Rotordynamic Performance of a Negative-Swirl Brake for a Tooth-on-Stator Labyrinth Seal.
138:062505.
2016
-
Orbit-Model Force Coefficients for Fluid Film Bearings: A Step Beyond Linearization.
138:022502.
2016
-
The Ultrahigh Efficiency Gas Turbine Engine With Stator Internal Combustion.
138:021506.
2016
-
Vibration Modeling and Experimental Results of Two-Phase Twin-Screw Pump.
138.
2016
-
Effect of Pad Flexibility on the Performance of Tilting Pad Journal Bearings-Benchmarking a Predictive Model.
137:122503.
2015
-
Experimental Identification of Dynamic Force Coefficients for a 110 MM Compliantly Damped Hybrid Gas Bearing.
137:072502.
2015
-
An All-Metal Compliant Seal Versus a Labyrinth Seal: A Comparison of Gas Leakage at High Temperatures.
137:052504.
2015
-
On the Predicted Performance of Oil Lubricated Thrust Collars in Integrally Geared Compressors.
137:052502.
2015
-
Prediction of Gas Thrust Foil Bearing Performance for Oil-Free Automotive Turbochargers.
137:032502-10.
2015
-
Comments on a Newly-Identified Destabilizing Rotordynamic Mechanism Arising in Vertical Hydraulic Turbines and the Back Shrouds of Centrifugal Impellers.
136:042502.
2014
-
The Impact of Hole Depth on the Rotordynamic and Leakage Characteristics of Hole-Pattern-Stator Gas Annular Seals.
136:042501.
2014
-
Static and Rotordynamic Characteristics for a New Hole-Pattern Annular Gas Seal Design Incorporating Larger Diameter Holes.
136:022507.
2014
-
Thermodynamic Considerations for Advanced, High Efficiency IC Engines.
136:101512.
2014
-
Performance Characteristics of Metal Mesh Foil Bearings: Predictions Versus Measurements.
135.
2013
-
The Role of Pivot Stiffness on the Dynamic Force Coefficients of Tilting Pad Journal Bearings.
135.
2013
-
Closure to "Discussion on 'Damping and Inertia Coefficients for Two End Sealed Squeeze Film Dampers With a Central Groove: Measurements and Predictions,'" (2013, ASME Paper No. GT2013-94273)..
135:125502.
2013
-
Damping and Inertia Coefficients for Two End Sealed Squeeze Film Dampers With a Central Groove: Measurements and Predictions.
135:112503.
2013
-
Measurements of Rotordynamic Response and Temperatures in a Rotor Supported on Metal Mesh Foil Bearings.
135:122507.
2013
-
On the Failure of a Gas Foil Bearing: High Temperature Operation Without Cooling Flow.
135:112506.
2013
-
One Explanation for Two-Times Running Speed Response Due to Misalignment in Rotors Connected by Flexible Couplings.
135:062501.
2013
-
Rotordynamics of a Two-Phase Flow Twin Screw Pump.
135:062502.
2013
-
Ignition Delay Time and Laminar Flame Speed Calculations for Natural Gas/Hydrogen Blends at Elevated Pressures.
135:021504.
2013
-
Measurement Versus Predictions of Rotordynamic Coefficients of a Hole-Pattern Gas Seal With Negative Preswirl.
134:122503.
2012
-
Tilting Pad Journal Bearings-A Discussion on Stability Calculation, Frequency Dependence, and Pad and Pivot.
134:122508.
2012
-
A Metal Mesh Foil Bearing and a Bump-Type Foil Bearing: Comparison of Performance for Two Similar Size Gas Bearings.
134:102501.
2012
-
Damping and Inertia Coefficients for Two Open Ends Squeeze Film Dampers With a Central Groove: Measurements and Predictions.
134:102506.
2012
-
Effect of Cooling Flow on the Operation of a Hot Rotor-Gas Foil Bearing System.
134:102511.
2012
-
On the Effect of Thermal Energy Transport to the Performance of (Semi) Floating Ring Bearing Systems for Automotive Turbochargers.
134:102507.
2012
-
A New, Iterative, Synchronous-Response Algorithm for Analyzing the Morton Effect.
134:072501.
2012
-
Dry-Friction Whip and Whirl Predictions for a Rotor-Stator Model With Rubbing Contact at Two Locations.
134:072502.
2012
-
A Novel Bulk-Flow Model for Improved Predictions of Force Coefficients in Grooved Oil Seals Operating Eccentrically.
134:052509.
2012
-
Assessment of Current Chemiluminescence Kinetics Models at Engine Conditions.
134:051501.
2012
-
Measured Static and Rotordynamic Coefficient Results for a Rocker-Pivot, Tilting-Pad Bearing With 50 and 60% Offsets.
134:052505.
2012
-
Rotordynamic Force Coefficients for Three Types of Annular Gas Seals With Inlet Preswirl and High Differential Pressure Ratio.
134:042503.
2012
-
Identification and Prediction of Force Coefficients in a Five-Pad and Four-Pad Tilting Pad Bearing for Load-on-Pad and Load-Between-Pad Configurations.
133:092503.
2011
-
Metal Mesh Foil Bearing: Effect of Motion Amplitude, Rotor Speed, Static Load, and Excitation Frequency on Force Coefficients.
133:122503.
2011
-
Identification of Rotordynamic Force Coefficients of a Metal Mesh Foil Bearing Using Impact Load Excitations.
133:112501.
2011
-
Identification of Structural Stiffness and Energy Dissipation Parameters in a Second Generation Foil Bearing: Effect of Shaft Temperature.
133:032501.
2011
-
Predicted Rotordynamic Behavior of a Labyrinth Seal as Rotor Surface Speed Approaches Mach 1.
132:112504.
2010
-
Ignition and Flame Speed Kinetics of Two Natural Gas Blends With High Levels of Heavier Hydrocarbons.
132:021504.
2010
-
Biodiesel Effects on Influencing Parameters of Brake Fuel Conversion Efficiency in a Medium Duty Diesel Engine.
132:122801.
2010
-
Static Performance Characteristics and Rotordynamic Coefficients for a Four-Pad Ball-in-Socket Tilting Pad Journal Bearing.
131:062502.
2009
-
Computational Study of the Effects of Shock Waves on Film Cooling Effectiveness.
131:031901.
2009
-
Effect of Side Feed Pressurization on the Dynamic Performance of Gas Foil Bearings: A Model Anchored to Test Data.
131:012501.
2009
-
Measurements Versus Predictions for the Rotordynamic Characteristics of a Five-Pad Rocker-Pivot Tilting-Pad Bearing in Load-Between-Pad Configuration.
131:012507.
2009
-
Hybrid Gas Bearings With Controlled Supply Pressure to Eliminate Rotor Vibrations While Crossing System Critical Speeds.
130:062505.
2008
-
Static and Dynamic Characteristics for a Pressure-Dam Bearing.
130:052501.
2008
-
Characteristic response of a production diesel oxidation catalyst exposed to lean and rich PCI exhaust.
130:042805.
2008
-
Flexure pivot tilting pad hybrid gas bearings: Operation with worn clearances and two load-pad configurations.
130:042506.
2008
-
Method and detailed analysis of individual hydrocarbon species from diesel combustion modes and diesel oxidation catalyst.
130:042803.
2008
-
Squeeze film damper with a mechanical end seal:: Experimental force coefficients derived from circular centered orbits.
130:042505.
2008
-
Identification of rotordynamic forces in a flexible rotor system using magnetic bearings.
130:022504.
2008
-
New steps to improve rotordynamic stability predictions of centrifugal compressors.
130:022505.
2008
-
A Design to Improve the Effective Damping Characteristics of Hole-Pattern-Stator Annular Gas Seals.
130:012505.
2008
-
Fuel flexibility influences on premixed combustor blowout, flashback autoignition and stability.
130:011506.
2008
-
Heavily loaded gas foil bearings: A model anchored to test data.
130:012504.
2008
-
Rotordynamic performance of flexure pivot hydrostatic gas bearings for oil-free turbomachinery.
129:1020-1027.
2007
-
Identification of force coefficients in a squeeze film damper with a mechanical end seal -: Part 1:: Unidirectional load tests.
129:858-864.
2007
-
Nonlinear rotordynamics of automotive turbochargers: Predictions and comparisons to test data.
129:488-493.
2007
-
Bump-type foil bearing structural stiffness: Experiments and predictions.
128:653-660.
2006
-
The development of a dual-injection hydrogen-fueled engine with high power and high efficiency.
128:203-212.
2006
-
Calculating the eigenfrequency of rotating acoustic annulus inside labyrinth seals of turbomachines.
127:178-181.
2005
-
Dynamic response of squeeze film dampers operating with bubbly mixtures.
126:408-415.
2004
-
The selective non-catalytic removal (SNCR) of nitric oxides from engine exhaust streams: Comparison of three processes.
126:234-240.
2004
-
Imbalance response of a rotor supported on flexure pivot tilting pad journal bearings in series with integral squeeze film dampers.
125:1026-1032.
2003
-
Measurements of rotordynamic coefficients of hybrid bearings with (a) a plugged orifice, (b) a worn land surface.
124:363-368.
2002
-
Air entrainment versus lubricant vaporization in squeeze film dampers: An experimental assessment of their fundamental differences.
123:871-877.
2001
-
Imbalance response of a rotor supported on open-ends integral squeeze film dampers.
121:718-724.
1999
-
Reduction of the dynamic load capacity in a squeeze film damper operating with a bubbly lubricant.
121:703-709.
1999
-
A bulk-flow analysis of multiple-pocket gas damper seals.
121:355-363.
1999
-
Experimental rotordynamic coefficient results for (a) a labyrinth seal with and without shunt injection and (b) a honeycomb seal.
121:153-159.
1999
-
A comparison of experimental rotordynamic coefficients and leakage characteristics between hole-pattern gas damper seals and a honeycomb seal.
120:778-783.
1998
-
Imbalance Response of a Test Rotor Supported on Squeeze Film Dampers.
120:397-404.
1998
-
The acoustic influence of cell depth on the rotordynamic characteristics of smooth-rotor/honeycomb-stator annular gas seals.
119:949-956.
1997
-
Modeling and simulation methods for MDOF structures and rotating machinery with impact dampers.
119:436-446.
1997
-
Experimental leakage and rotordynamic results for helically grooved annular gas seals.
118:389-393.
1996
-
Active vibration control of rotating machinery with a hybrid piezohydraulic actuator system.
117:767-776.
1995
-
GETRAN - A GENERIC, MODULARLY STRUCTURED COMPUTER CODE FOR SIMULATION OF DYNAMIC BEHAVIOR OF AERO AND POWER-GENERATION GAS-TURBINE ENGINES.
116:483-494.
1994
-
GETRAN: a generic, modularly structured computer code for simulation of dynamic behavior of aero- and power generation gas turbine engines.
116:494-483.
1994
-
A GAS-OPERATED BEARING DAMPER FOR TURBOMACHINERY.
115:383-389.
1993
-
DYNAMIC FORCE RESPONSE OF AN OPEN-ENDED SQUEEZE FILM DAMPER.
115:341-346.
1993
-
COAL-WATER SLURRY SPRAY CHARACTERISTICS OF A POSITIVE DISPLACEMENT FUEL-INJECTION SYSTEM.
114:528-533.
1992
-
A NEW HEAT-TRANSFER CORRELATION AND FLOW REGIME MAP FOR TUBE BUNDLES.
112:150-156.
1990
-
Reduction of Nitrogen Oxides in Engine Exhaust Gases by the Addition of Cyanuric Acid.
111:387-393.
1989
-
Active Control of Transient Rotordynamic Vibration by Optimal Control Methods.
111:264-270.
1989
-
EFFECT OF FLUID INERTIA ON THE PERFORMANCE OF SQUEEZE FILM DAMPER SUPPORTED ROTORS.
110:51-57.
1988
-
Effect of Fluid Inertia on the Performance of Squeeze Film Damper Supported Rotors.
110:51-57.
1988
-
Experimental Rotordynamic Coefficient Results for Teeth-on-Rotor and Teeth-on-Stator Labyrinth Gas Seals.
108:599-604.
1986
-
Numerical Simulations of Two-Stroke Cycle Engines Using Coal Fuels.
108:661-668.
1986
-
An Iwatsubo-Based Solution for Labyrinth Seals: Comparison to Experimental Results.
108:325-331.
1986
-
EFFECTS OF FLUID INERTIA AND TURBULENCE ON THE FORCE COEFFICIENTS FOR SQUEEZE FILM DAMPERS.
108:332-339.
1986
-
Effects of Fluid Inertia and Turbulence on the Force Coefficients for Squeeze Film Dampers.
108:332-339.
1986
-
EXPERIMENTAL ROTORDYNAMIC COEFFICIENT RESULTS FOR TEETH-ON-ROTOR AND TEETH-ON-STATOR LABYRINTH GAS SEALS.
108:599-604.
1986
-
Heat Transfer Enhancement in Channels With Turbulence Promoters.
107:628-635.
1985
-
VIBRATION CHARACTERISTICS OF THE HPOTP (HIGH-PRESSURE OXYGEN TURBOPUMP) OF THE SSME (SPACE-SHUTTLE MAIN ENGINE).
107:152-159.
1985
-
Creating Reduced Kinetics Models That Satisfy the Entropy Inequality.
137:071504.
-
Prediction of Aeroacoustic Resonance in Cavities of Hole-Pattern Stator Seals.
133:022504.
-
The Influence of In Situ Reheat on Turbine-Combustor Performance.
128:560-572.
-
EXPERIMENTAL STUDY OF THE STATIC AND DYNAMIC CHARACTERISTICS OF A LONG (L/D=0.75) LABYRINTH ANNULAR SEAL OPERATING UNDER TWO-PHASE (LIQUID/GAS) CONDITIONS
2019
-
LEAKAGE AND DYNAMIC FORCE COEFFICIENTS OF A POCKET DAMPER SEAL OPERATING UNDER A WET GAS CONDITION: TESTS VS. PREDICTIONS
2019
-
CH KINETICS MEASUREMENTS AND THEIR IMPORTANCE FOR MODELING PROMPT NOx FORMATION IN GAS TURBINES
2019
-
SIMULATION, TEST AND MITIGATION OF 1/2X FORWARD WHIRL FOLLOWING ROTOR DROP ONTO AUXILIARY BEARINGS
2019
-
PRESWIRL AND MIXED-FLOW (MAINLY-LIQUID) EFFECTS ON ROTORDYNAMIC PERFORMANCE OF A LONG (L/D=0.75) SMOOTH SEAL
2019
-
A STUDY FOR ROTORDYNAMIC AND LEAKAGE CHARACTERISTICS OF A LONG-HONEYCOMB SEAL WITH TWO-PHASE, MAINLY AIR MIXTURES
2019
-
A STUDY ON THE LEAKAGE AND ROTORDYNAMIC COEFFICIENTS OF A LONG-SMOOTH SEAL WITH LAMINAR-TWO-PHASE, MAINLY-OIL MIXTURES
2019
-
LAMINAR FLAME SPEED EXPERIMENTS OF ALTERNATIVE LIQUID FUELS
2019
-
Leakage and Force Coefficients of a Grooved Wet (Bubbly Liquid) Seal for Multiphase Pumps and Comparisons with Prior Test Results for a Three Wave Seal
2019
-
NOX-HYDROCARBON KINETICS MODEL VALIDATION USING MEASUREMENTS OF H2O IN SHOCK-HEATED CH4/C2H6 MIXTURES WITH NO2 AS OXIDANT
2018
-
PERFORMANCE CHARACTERISTICS OF METAL MESH FOIL BEARINGS: PREDICTIONS VS. MEASUREMENTS
2013
-
THE ROLE OF PIVOT STIFFNESS ON THE DYNAMIC FORCE COEFFICIENTS OF TILTING PAD JOURNAL BEARINGS
2013
-
Measurements of Drag Torque, Lift-Off Journal Speed, and Temperature in a Metal Mesh Foil Bearing
2010
-
High temperature characterization of a radial magnetic bearing for turbomachinery
2005
-
Theory and test correlation for laminate stacking factor effect on homopolar bearing stiffness
2004
-
Rotordynamic force prediction of whirling centrifugal impeller shroud passages using computational fluid dynamic techniques
2001
-
Imbalance response of a test rotor supported on squeeze film dampers
1998
-
Theoretical and experimental comparisons for damping coefficients of a short-length open end squeeze film damper
1996
-
ACTIVE VIBRATION CONTROL OF ROTATING MACHINERY USING PIEZOELECTRIC ACTUATORS INCORPORATING FLEXIBLE CASING EFFECTS
1995
-
THE GENERAL-ELECTRIC COAL-FUELED DIESEL-ENGINE PROGRAM (1982-1993) - A TECHNICAL REVIEW
1994
-
ELECTROMECHANICAL SIMULATION AND TESTING OF ACTIVELY CONTROLLED ROTORDYNAMIC SYSTEMS WITH PIEZOELECTRIC ACTUATORS
1993
-
COAL-FUELED DIESEL CYCLE SIMULATION - THE ROLE OF GROUP EFFECTS
1990
-
AN IWATSUBO-BASED SOLUTION FOR LABYRINTH SEALS - COMPARISON TO EXPERIMENTAL RESULTS
1986
-
HEAT-TRANSFER ENHANCEMENT IN CHANNELS WITH TURBULENCE PROMOTERS
1985
Identity
International Standard Serial Number (ISSN)
