HR job title
- Professor
- Contact Info
- 1 979 845 5280
Palazzolo, Alan Professor
Positions
- Professor, Mechanical Engineering, College of Engineering
- Faculty Affiliate, Energy Institute, Texas A&M Engineering Experiment Station (TEES)
I have research interests in Rotordynamics, Magnetic Bearings, Active Vibration and Noise Control, Fluid Film Bearings, Vibrations, Finite and Boundary Elements, Seal and Impeller Leakage Flow, Piping Systems, Machine Design, Flywheels, Machinery Couplings, Expert Systems, Microgravity Vibration Isolation, Electromechanical Systems, CFD flow in pumps and compressors, Heart pumps (VAD), drillstring vibration, and RO desalination.
- Overview
- Publications
- Research
- Teaching
- Works By Students
- Background
- Contact
- Other
- View All
Overview
Publications
selected publications
-
academic article
-
Derbal, M., Gharib, M., Refaat, S. S., Palazzolo, A., & Sassi, S.
(2021).
Fractional-order controllers for stick-slip vibration mitigation in oil well drill-strings. Journal of Low Frequency Noise, Vibration and Active Control.
40(3), 1571-1584.
-
Dawahdeh, A., Oh, J., Zhai, T., & Palazzolo, A.
(2021).
Computational Fluid Dynamics-Machine Learning Prediction of Machinery Coupling Windage Heating and Power Loss. Journal of Heat Transfer.
143(8),
-
Yang, J., & Palazzolo, A.
(2021).
Power loss reduction for tilt pad journal bearings utilizing pad pockets and steps. Tribology International.
159, 106993-106993.
-
Oh, J., Kim, B. J., & Palazzolo, A.
(2021).
Three-Dimensional Solid Finite Element Contact Model for Rotordynamic Analysis: Experiment and Simulation. Journal of Vibration and Acoustics: Transactions of the ASME.
143(3),
-
Shin, D., Yang, J., Tong, X., Suh, J., & Palazzolo, A.
(2021).
A Review of Journal Bearing Thermal Effects on Rotordynamic Response. Journal of Tribology.
143(3),
-
Shin, D., & Palazzolo, A. B.
(2021).
Tilting Pad Journal Bearing Misalignment Effect on Thermally Induced Synchronous Instability (Morton Effect). Journal of Tribology.
143(3),
-
Yang, J., & Palazzolo, A.
(2021).
Computational Fluid Dynamics Based Mixing Prediction for Tilt Pad Journal Bearing TEHD Modeling-Part I: TEHD-CFD Model Validation and Improvements. Journal of Tribology.
143(1),
-
Yang, J., & Palazzolo, A.
(2021).
Computational Fluid Dynamics Based Mixing Prediction for Tilt Pad Journal Bearing TEHD Modeling-Part II: Implementation With Machine Learning. Journal of Tribology.
143(1),
-
Shin, D., Palazzolo, A. B., & Tong, X.
(2020).
Squeeze Film Damper Suppression of Thermal Bow-Morton Effect Instability. Journal of Engineering for Gas Turbines and Power.
142(12),
-
Kavosi, J., Creasy, T. S., Palazzolo, A., & Naraghi, M.
(2020).
Crosslinked network microstructure of carbon nanomaterials promotes flaw-tolerant mechanical response. Nanotechnology.
31(31), 315606-315606.
-
Kang, X., Palazzolo, A., & Zhong, W.
(2020).
Auxiliary bearing squeeze film dampers for magnetic bearing supported rotors. Tribology International.
146, 106181-106181.
-
Shin, D., & Palazzolo, A.
(2020).
Nonlinear analysis of a geared rotor system supported by fluid film journal bearings. Journal of Sound and Vibration.
475, 115269-115269.
-
Kang, X., & Palazzolo, A.
(2020).
Simulation, Test, and Mitigation of 1/2x Forward Whirl Following Rotor Drop Onto Auxiliary Bearings. Journal of Engineering for Gas Turbines and Power.
142(4),
-
Oh, J., Palazzolo, A., & Hu, L.
(2020).
Stability of Non-Axisymmetric Rotor and Bearing Systems Modeled With Three-Dimensional-Solid Finite Elements. Journal of Vibration and Acoustics: Transactions of the ASME.
142(1),
-
Hu, L., & Palazzolo, A.
(2019).
An Enhanced Axisymmetric Solid Element for Rotor Dynamic Model Improvement. Journal of Vibration and Acoustics: Transactions of the ASME.
141(5),
-
Li, W., Su, X. u., Palazzolo, A., & Ahmed, S.
(2019).
A flux boundary scheme in the lattice Boltzmann method and its applications in the simulation of membrane desalination. DESALINATION AND WATER TREATMENT.
161, 76-91.
-
Su, X. u., Li, W., Palazzolo, A., & Ahmed, S.
(2019).
A two-dimensional numerical model for silica colloidal fouling in a spacerfilled reverse osmosis membrane system (Retraction of Vol 580, Pg 24, 2019). 585, 289-289.
-
Kim, S., & Palazzolo, A. B.
(2019).
Pad-Pivot Friction Effect on Nonlinear Response of a Rotor Supported by Tilting-Pad Journal Bearings. Journal of Tribology.
141(9),
-
Mortazavi, F., & Palazzolo, A.
(2019).
A Transient Computational Fluid Dynamics, Phase Modulated, Multifrequency Approach for Impeller Rotordynamic Forces. Journal of Fluids Engineering, Transactions of the ASME.
141(7),
-
Su, X. u., Li, W., Palazzolo, A., & Ahmed, S.
(2019).
A two-dimensional numerical model for silica colloidal fouling in a spacer-filled reverse osmosis membrane system. 580, 24-39.
-
Yang, J., & Palazzolo, A.
(2019).
Three-Dimensional Thermo-Elasto-Hydrodynamic Computational Fluid Dynamics Model of a Tilting Pad Journal Bearing-Part I: Static Response. Journal of Tribology.
141(6), 1-44.
-
Yang, J., & Palazzolo, A.
(2019).
Three-Dimensional Thermo-Elasto-Hydrodynamic Computational Fluid Dynamics Model of a Tilting Pad Journal Bearing-Part II: Dynamic Response. Journal of Tribology.
141(6), 1-35.
-
Su, X. u., Li, W., Palazzolo, A., & Ahmed, S.
(2019).
Permeate flux increase by colloidal fouling control in a vibration enhanced reverse osmosis membrane desalination system. Desalination.
453, 22-36.
-
Li, W., Su, X. u., Palazzolo, A., & Ahmed, S.
(2019).
Numerical modeling of concentration polarization and inorganic fouling growth in the pressure-driven membrane filtration process. 569, 71-82.
-
Mortazavi, F., & Palazzolo, A.
(2018).
Rotordynamic Force Coefficients of Volutes and Diffusers for Prediction of Turbomachinery Vibration. Journal of Vibration and Acoustics: Transactions of the ASME.
140(5),
-
Anvari, B., Li, X., Toliyat, H. A., & Palazzolo, A.
(2018).
A Coreless Permanent-Magnet Machine for a Magnetically Levitated Shaft-Less Flywheel. IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS.
54(5), 4288-4296.
-
Li, X., Anvari, B., Palazzolo, A., Wang, Z., & Toliyat, H.
(2018).
A Utility-Scale Flywheel Energy Storage System with a Shaftless, Hubless, High-Strength Steel Rotor. 65(8), 6667-6675.
-
Mortazavi, F., & Palazzolo, A.
(2018).
Prediction of Rotordynamic Performance of Smooth Stator-Grooved Rotor Liquid Annular Seals Utilizing Computational Fluid Dynamics. Journal of Vibration and Acoustics: Transactions of the ASME.
140(3),
-
Li, X., & Palazzolo, A.
(2018).
Multi-Input-Multi-Output Control of a Utility-Scale, Shaftless Energy Storage Flywheel With a Five-Degrees-of-Freedom Combination Magnetic Bearing. Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME.
140(10), 101008.
-
Su, X. u., Li, W., Palazzolo, A., & Ahmed, S.
(2018).
Concentration polarization and permeate flux variation in a vibration enhanced reverse osmosis membrane module. Desalination.
433, 75-88.
-
Tong, X., & Palazzolo, A.
(2018).
Measurement and Prediction of the Journal Circumferential Temperature Distribution for the Rotordynamic Morton Effect. Journal of Tribology.
140(3), 031702.
-
Tong, X., & Palazzolo, A.
(2018).
Tilting pad gas bearing induced thermal bow- rotor instability (Morton effect). Tribology International.
121, 269-279.
-
Kim, E., & Palazzolo, A.
(2018).
Rotordynamic Stability Effects of Shrouded Centrifugal Impellers With Combined Whirl and Precession. Journal of Vibration and Acoustics: Transactions of the ASME.
140(2), 021007.
-
Kim, S., & Palazzolo, A. B.
(2018).
Bifurcation Analysis of a Rotor Supported by Five-Pad Tilting Pad Journal Bearings Using Numerical Continuation. Journal of Tribology.
140(2), 021701.
-
Kang, X., & Palazzolo, A.
(2018).
Dynamic and Thermal Analysis of Rotor Drop on Sleeve Type Catcher Bearings in Magnetic Bearing Systems. Journal of Engineering for Gas Turbines and Power.
140(2), 022501.
-
Tong, X., Palazzolo, A., & Suh, J.
(2017).
A Review of the Rotordynamic Thermally Induced Synchronous Instability (Morton) Effect. Applied Mechanics Reviews.
69(6), 060801.
-
Tong, X., Palazzolo, A., & Suh, J.
(2017).
Closure to "Discussion of 'A Review of the Rotordynamic Thermally Induced Synchronous Instability (Morton) Effect'" (Tong, X., Palazzolo, A., and Suh, J., 2017, ASME Appl. Mech. Rev., 69(6), p. 060801). Applied Mechanics Reviews.
69(6), 066001.
-
Kim, S., & Palazzolo, A. B.
(2017).
Effects of thermo hydrodynamic (THD) floating ring bearing model on rotordynamic bifurcation. International Journal of Non-Linear Mechanics.
95, 30-41.
-
Suh, J., Palazzolo, A., & Choi, Y.
(2017).
Numerical Modeling and Analysis of Flexure-Pivot Tilting-Pad Bearing. Journal of Tribology.
139(5), 051704.
-
Li, W., Su, X. u., Palazzolo, A., Ahmed, S., & Thomas, E.
(2017).
Reverse osmosis membrane, seawater desalination with vibration assisted reduced inorganic fouling. Desalination.
417, 102-114.
-
Kim, S., & Palazzolo, A. B.
(2017).
Shooting With Deflation Algorithm-Based Nonlinear Response and Neimark-Sacker Bifurcation and Chaos in Floating Ring Bearing Systems. 12(3), 031003.
-
Zhong, W., Palazzolo, A., & Kang, X.
(2017).
Multi-Objective Optimization Design of Nonlinear Magnetic Bearing Rotordynamic System. 139(1), 011011.
-
Tong, X., & Palazzolo, A.
(2017).
Double Overhung Disk and Parameter Effect on Rotordynamic Synchronous Instability-Morton Effect-Part I: Theory and Modeling Approach. Journal of Tribology.
139(1), 011705.
-
Tong, X., & Palazzolo, A.
(2017).
Double Overhung Disk and Parameter Effect on Rotordynamic Synchronous Instability-Morton Effect-Part II: Occurrence and Prevention. 139(1), 011706.
-
Hu, L., & Palazzolo, A.
(2017).
Solid Element Rotordynamic Modeling of a Rotor on a Flexible Support Structure Utilizing Multiple-Input and Multiple-Output Support Transfer Functions. Journal of Engineering for Gas Turbines and Power.
139(1), 012503.
-
Hu, L., Palazzolo, A., & Karkoub, M.
(2016).
Suppression of Lateral and Torsional Stick-Slip Vibrations of Drillstrings With Impact and Torsional Dampers. Journal of Vibration and Acoustics: Transactions of the ASME.
138(5), 051013.
-
Zhang, X., Palazzolo, A., Tucker, R., Kascak, A., & Kweon, C.
(2016).
Flash vapor fuel injector development. International Journal of Engine Research.
17(6), 646-665.
-
Tong, X., Palazzolo, A., & Suh, J.
(2016).
Rotordynamic Morton Effect Simulation With Transient, Thermal Shaft Bow. 138(3), 031705.
-
Kim, E., & Palazzolo, A.
(2016).
Rotordynamic Force Prediction of a Shrouded Centrifugal Pump Impeller-Part I: Numerical Analysis. 138(3), 031014.
-
Kim, E., & Palazzolo, A.
(2016).
Rotordynamic Force Prediction of a Shrouded Centrifugal Pump Impeller-Part II: Stability Analysis. Journal of Vibration and Acoustics: Transactions of the ASME.
138(3), 031015.
-
Han, X. u., & Palazzolo, A.
(2016).
Unstable force analysis for induction motor eccentricity. Journal of Sound and Vibration.
370, 230-258.
-
Suh, J., & Palazzolo, A.
(2015).
Three-Dimensional Dynamic Model of TEHD Tilting-Pad Journal Bearing-Part I: Theoretical Modeling. Journal of Tribology.
137(4), 041703.
-
Suh, J., & Palazzolo, A.
(2015).
Three-Dimensional Dynamic Model of TEHD Tilting-Pad Journal Bearing-Part II: Parametric Studies. Journal of Tribology.
137(4), 041704.
-
Zhong, W., & Palazzolo, A.
(2015).
Magnetic Bearing Rotordynamic System Optimization Using Multi-Objective Genetic Algorithms. 137(2), 021012.
-
Mongkolcheep, K., Ruimi, A., & Palazzolo, A.
(2015).
Modal Reduction Technique for Predicting the Onset of Chaotic Behavior due to Lateral Vibrations in Drillstrings. Journal of Vibration and Acoustics: Transactions of the ASME.
137(2), 021003.
-
Zhang, X., Palazzolo, A. B., Kweon, C., Thomas, E., Tucker, R., & Kascak, A.
(2014).
ERRATUM: Direct Fuel Injector Power Drive System Optimization. SAE International Journal of Engines.
7(3), 1154-1154.
-
Suh, J., & Palazzolo, A.
(2014).
Three-Dimensional Thermohydrodynamic Morton Effect Analysis-Part II: Parametric Studies. Journal of Tribology.
136(3), 031707.
-
Suh, J., & Palazzolo, A.
(2014).
Three-Dimensional Thermohydrodynamic Morton Effect Simulation-Part I: Theoretical Model. 136(3), 031706.
-
Zhang, X., Palazzolo, A., Kweon, C., Thomas, E., Tucker, R., & Kascak, A.
(2014).
Direct Fuel Injector Power Drive System Optimization. SAE International Journal of Engines.
7(3), 1137-1154.
-
Lee, J. G., & Palazzolo, A.
(2013).
Morton Effect Cyclic Vibration Amplitude Determination for Tilt Pad Bearing Supported Machinery. 135(1), 011701.
-
Wang, Z., Palazzolo, A., & Park, J.
(2012).
Hybrid Train Power with Diesel Locomotive and Slug Car-Based Flywheels for NOx and Fuel Reduction. Journal of Energy Engineering.
138(4), 215-236.
-
Lee, J. G., & Palazzolo, A.
(2012).
Catcher Bearing Life Prediction Using a Rainflow Counting Approach. 134(3), 031101.
-
Kang, K., & Palazzolo, A.
(2012).
Homopolar Magnetic Bearing Saturation Effects on Rotating Machinery Vibration. 48(6), 1984-1994.
-
Park, J., & Palazzolo, A.
(2010).
Magnetically Suspended VSCMGs for Simultaneous Attitude Control and Power Transfer IPAC Service. 132(5), 051001-15.
-
Browne, M., & Palazzolo, A.
(2009).
Super harmonic nonlinear lateral vibrations of a segmented driveline incorporating a tuned damper excited by non-constant velocity joints. Journal of Sound and Vibration.
323(1-2), 334-351.
-
Sun, G., Palazzolo, A., Provenza, A., Lawrence, C., & Carney, K.
(2008).
Long duration blade loss simulations including thermal growths for dual-rotor gas turbine engine. Journal of Sound and Vibration.
316(1-5), 147-163.
-
Lei, S., & Palazzolo, A.
(2008).
Control of flexible rotor systems with active magnetic bearings. Journal of Sound and Vibration.
314(1-2), 19-38.
-
Park, J., Palazzolo, A., & Beach, R.
(2008).
MIMO active vibration control of magnetically suspended flywheels for satellite IPAC service. Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME.
130(4), 041005-04100522.
-
Sun, G., & Palazzolo, A. B.
(2007).
Rotor drop and following thermal growth simulations using detailed auxiliary bearing and damper models (vol 289, pg 334, 2006). Journal of Sound and Vibration.
306(3-5), 975-975.
-
Kenny, A., Palazzolo, A., Preuss, J., Tucker, R., & Konno, K.
(2005).
Electropolishing iron-cobalt-vanadium laminate stacks to improve performance of electrical machinery. PLATING AND SURFACE FINISHING.
92(2), 38-41.
-
Li, M. H., Palazzolo, A. B., Kenny, A., Provenza, A. J., Beach, R. F., & Kascak, A. F.
(2004).
Fault-tolerant homopolar magnetic bearings. IEEE Transactions on Magnetics.
40(5), 3308-3318.
-
Sun, G., Palazzolo, A. B., Provenza, A., & Montague, G.
(2004).
Detailed ball bearing model for magnetic suspension auxiliary service. 269(3-5), 933-963.
-
Minihan, T. P., Lei, S., Sun, G., Palazzolo, A., Kascak, A. F., & Calvert, T.
(2003).
Large motion tracking control for thrust magnetic bearings with fuzzy logic, sliding mode, and direct linearization. 263(3), 549-567.
-
Kenny, A., & Palazzolo, A. B.
(2003).
Single plane radial, magnetic bearings biased with poles containing permanent magnets. Journal of Mechanical Design - Transactions of the ASME.
125(1), 178-185.
-
Na, U. J., Palazzolo, A. B., & Provenza, A.
(2002).
Test and theory correlation study for a flexible rotor on fault-tolerant magnetic bearings. Journal of Vibration and Acoustics: Transactions of the ASME.
124(3), 359-366.
-
Kenny, A., & Palazzolo, A. B.
(2002).
Comparison of the dynamic response of radial and tangential magnetic flux thrust bearings. IEEE/ASME transactions on mechatronics.
7(1), 61-66.
-
Na, U. J., & Palazzolo, A.
(2001).
The fault-tolerant control of magnetic bearings with reduced controller outputs. 123(2), 219-224.
-
Na, U. J., & Palazzolo, A. B.
(2000).
Fault tolerance of magnetic bearings with material path reluctances and fringing factors. IEEE Transactions on Magnetics.
36(6), 3939-3946.
-
Lei, S. L., Palazzolo, A., Na, U., & Kascak, A.
(2000).
Non-linear fuzzy logic control for forced large motions of spinning shafts. Journal of Sound and Vibration.
235(3), 435-449.
-
Na, U. J., & Palazzolo, A.
(2000).
Optimized realization of fault-tolerant heteropolar magnetic bearings. 122(3), 209-221.
-
Moore, J. J., & Palazzolo, A. B.
(1999).
CFD comparison to 3D laser anemometer and rotordynamic force measurements for grooved liquid annular seals. Journal of Tribology.
121(2), 306-314.
-
Chinta, M., & Palazzolo, A. B.
(1998).
Stability and bifurcation of rotor motion in a magnetic bearing. Journal of Sound and Vibration.
214(5), 793-803.
-
DeWeese, R. T., Palazzolo, A. B., Chinta, M., & Kascak, A.
(1998).
Magnetic thrust bearing concepts: Tests and analyses. Journal of Intelligent Material Systems and Structures.
9(2), 81-86.
-
Manchala, D. W., Palazzolo, A. B., Kascak, A. F., Montague, G. T., & Brown, G. V.
(1997).
Constrained quadratic programming, active control of rotating mass imbalance. Journal of Sound and Vibration.
205(5), 561-580.
-
Moore, J. J., Palazzolo, A. B., Gadangi, R. K., Kascak, A. F., Brown, G., & Montague, G.
(1997).
Hybrid friction-impact vibration damper for cryogenic rotating machinery. Journal of Propulsion and Power.
13(4), 495-501.
-
McElhaney, J. M., Palazzolo, A., & Kascak, A.
(1997).
Modeling and simulation methods for MDOF structures and rotating machinery with impact dampers. Journal of Engineering for Gas Turbines and Power.
119(2), 436-446.
-
Tang, P. N., Palazzolo, A. B., Kascak, A. F., & Montague, G. T.
(1997).
Electromechanical modeling of hybrid piezohydraulic actuator system for active vibration control. Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME.
119(1), 10-18.
-
Palazzolo, A.
(1997).
Discussion: A Global Approach of Thermal Effects Including Pad Deformations in Tilting-Pad Journal Bearings Submitted to Unbalance Load (Fillon, M., Desbordes, H., Frne, J., and Chan Hew Wai, C., 1996, ASME J. Tribol., 118, pp. 169174). Journal of Tribology.
119(1), 227-227.
-
Venkataraman, B., & Palazzolo, A. B.
(1997).
Thermohydrodynamic analysis of eccentric annular seals using cubic spline interpolations. Tribology Transactions.
40(1), 183-194.
-
Gadangi, R. K., Palazzolo, A. B., & Kim, J.
(1996).
Transient analysis of plain and tilt pad journal bearings including fluid film temperature effects. Journal of Tribology.
118(2), 423-430.
-
Tang, P., Palazzolo, A. B., Kascak, A. F., & Montague, G. T.
(1995).
Active vibration control of rotating machinery with a hybrid piezohydraulic actuator system. Journal of Engineering for Gas Turbines and Power.
117(4), 767-776.
-
MOORE, J. J., PALAZZOLO, A. B., GADANGI, R., NALE, T. A., KLUSMAN, S. A., BROWN, G. V., & KASCAK, A. F.
(1995).
A FORCED RESPONSE ANALYSIS AND APPLICATION OF IMPACT DAMPERS TO ROTORDYNAMIC VIBRATION SUPPRESSION IN A CRYOGENIC ENVIRONMENT. Journal of Vibration and Acoustics: Transactions of the ASME.
117(3), 300-310.
-
TANG, P., PALAZZOLO, A., KASCAK, A., MONTAGUE, G., & LI, W.
(1995).
COMBINED PIEZOELECTRIC-HYDRAULIC ACTUATOR BASED ACTIVE VIBRATION CONTROL FOR ROTORDYNAMIC SYSTEM. Journal of Vibration and Acoustics: Transactions of the ASME.
117(3), 285-293.
-
Tang, P., Palazzolo, A., Kascak, A., Montague, G., & Li, W.
(1995).
Combined Piezoelectric-Hydraulic Actuator Based Active Vibration Control for Rotordynamic System. Journal of Vibration and Acoustics: Transactions of the ASME.
117(3A), 285-293.
-
Moore, J. J., Palazzolo, A. B., Gadangi, R., Nale, T. A., Klusman, S. A., Brown, G. V., & Kascak, A. F.
(1995).
Forced response analysis and application of impact dampers to rotordynamic vibration suppression in a cryogenic environment. Journal of Vibration and Acoustics: Transactions of the ASME.
117(3),
-
KIM, C., PALAZZOLO, A. B., KASCAK, A., & BROWN, G.
(1995).
EDDY-CURRENT EFFECTS ON THE DESIGN OF ROTOR-MAGNETIC BEARING SYSTEMS. Journal of Mechanical Design - Transactions of the ASME.
117(B), 162-170.
-
Kim, C., Palazzolo, A. B., Kascak, A., & Brown, G.
(1995).
Eddy Current Effects on the Design of Rotor-Magnetic Bearing Systems. Journal of Mechanical Design - Transactions of the ASME.
117(B), 162-170.
-
GADANGI, R. K., & PALAZZOLO, A. B.
(1995).
TRANSIENT ANALYSIS OF TILT PAD JOURNAL BEARINGS INCLUDING EFFECTS OF PAD FLEXIBILITY AND FLUID FILM TEMPERATURE. Journal of Tribology.
117(2), 302-307.
-
KIM, J., PALAZZOLO, A., & GADANGI, R.
(1995).
DYNAMIC CHARACTERISTICS OF TEHD TILT PAD JOURNAL BEARING SIMULATION INCLUDING MULTIPLE-MODE PAD FLEXIBILITY MODEL. Journal of Vibration and Acoustics: Transactions of the ASME.
117(1), 123-135.
-
Gadangi, R. K., Palazzolo, A. B., & Kim, J.
(1994).
Transient analysis of plain and tilt pad journal bearings including fluid film temperature effects. American Society of Mechanical Engineers (Paper).
1-8.
-
Gadangi, R. K., & Palazzolo, A. B.
(1994).
Transient analysis of tilt pad journal bearings including effects of pad flexibility and fluid film temperature. American Society of Mechanical Engineers (Paper).
1-6.
-
PALAZZOLO, A. B., JAGANNATHAN, S., KASCAK, A. F., MONTAGUE, G. T., & KIRALY, L. J.
(1993).
HYBRID ACTIVE VIBRATION CONTROL OF ROTORBEARING SYSTEMS USING PIEZOELECTRIC ACTUATORS. Journal of Vibration and Acoustics: Transactions of the ASME.
115(1), 111-119.
-
PALAZZOLO, A. B., LIN, R. R., ALEXANDER, R. M., KASCAK, A. F., & MONTAGUE, J.
(1991).
TEST AND THEORY FOR PIEZOELECTRIC ACTUATOR-ACTIVE VIBRATION CONTROL OF ROTATING MACHINERY. Journal of Vibration and Acoustics: Transactions of the ASME.
113(2), 167-175.
-
EARLES, L. L., PALAZZOLO, A. B., & ARMENTROUT, R. W.
(1990).
A FINITE-ELEMENT APPROACH TO PAD FLEXIBILITY EFFECTS IN TILT PAD JOURNAL BEARINGS .1. SINGLE PAD ANALYSIS. Journal of Tribology.
112(2), 169-177.
-
EARLES, L. L., PALAZZOLO, A. B., & ARMENTROUT, R. W.
(1990).
A FINITE-ELEMENT APPROACH TO PAD FLEXIBILITY EFFECTS IN TILT PAD JOURNAL BEARINGS .2. ASSEMBLED BEARING AND SYSTEM-ANALYSIS. Journal of Tribology.
112(2), 178-182.
-
PALAZZOLO, A. B., LIN, R. R., ALEXANDER, R. M., KASCAK, A. F., & MONTAGUE, J.
(1989).
PIEZOELECTRIC PUSHERS FOR ACTIVE VIBRATION CONTROL OF ROTATING MACHINERY. Journal of Vibration and Acoustics.
111(3), 298-305.
-
Palazzolo, A. B., Lin, R. R., Kascak, A. F., & Alexander, R. M.
(1989).
Active Control of Transient Rotordynamic Vibration by Optimal Control Methods. Journal of Engineering for Gas Turbines and Power.
111(2), 264-270.
-
EARLES, L. L., PALAZZOLO, A. B., LEE, C. K., & GERHOLD, C. H.
(1988).
HYBRID FINITE-ELEMENT - BOUNDARY ELEMENT SIMULATION OF ROTATING MACHINERY SUPPORTED ON FLEXIBLE FOUNDATION AND SOIL. Journal of Vibration and Acoustics.
110(3), 300-306.
-
PALAZZOLO, A. B.
(1986).
COMBINE COMPUTER-SIMULATION AND FIELD TESTING TO SOLVE PROBLEMS. Hydrocarbon Processing.
65(5), 59-62.
-
Wang, B. P., Kitis, L., Pilkey, W. D., & Palazzolo, A.
(1985).
Synthesis of Dynamic Vibration Absorbers. Journal of Vibration and Acoustics: Transactions of the ASME.
107(2), 161-166.
-
Palazzolo, A. B., Wang, B. P., & Pilkey, W. D.
(1983).
Component Synthesis of Multicase, Rotating Machinery Trains by the Generalized Receptance Approach. J ENG POWER TRANS ASME.
105(4), 941-946.
-
Palazzolo, A. B., Wang, B. P., & Pilkey, W. D.
(1983).
Eigensolution Reanalysis of Rotor Dynamic Systems by the Generalized Receptance Method. J ENG POWER TRANS ASME.
105(3), 543-550.
-
Palazzolo, A. B., Wang, B. P., & Pilkey, W. D.
(1982).
A receptance formula for general seconddegree square lambda matrices. International Journal for Numerical Methods in Engineering.
18(6), 829-843.
-
Wang, B. P., Kitis, L., Pilkey, W. D., & Palazzolo, A.
(1982).
Structural modification to achieve antiresonance in helicopters. Journal of Aircraft.
19(6), 499-504.
-
Palazzolo, A. B., Wang, B. P., & Pilkey, W. D.
(1982).
Eigensolution reanalysis of rotor dynamic systems by the generalized receptance method. American Society of Mechanical Engineers (Paper).
-
Palazzolo, A. B., Wang, B. P., & Pilkey, W. D.
(1982).
Eigensolution reanalysis of rotor dynamic systems by the generalized receptance method. American Society of Mechanical Engineers (Paper).
-
Palazzolo, A. B., & Gunter, E. J.
(1982).
Nodal balancing without trial weights by a modified Nyquist plot procedure
-
Palazzolo, A. B., & Gunter, E. J.
(1982).
Nodal balancing without trial weights by a modified Nyquist plot procedure
-
Derbal, M., Gharib, M., Refaat, S. S., Palazzolo, A., & Sassi, S.
(2021).
Fractional-order controllers for stick-slip vibration mitigation in oil well drill-strings. Journal of Low Frequency Noise, Vibration and Active Control.
40(3), 1571-1584.
-
chapter
-
Palazzolo, A. B., Wang, Z., Gu Lee, J., Kascak, A. F., & Provenza, A. J.
(2012).
Handbook of Lubrication and Tribology, Volume II. Bruce, R. W. (Eds.),
Handbook of Lubrication and Tribology, Volume II: Theory and Design, Second Edition.
55-1-55-22.
CRC Press.
-
Palazzolo, A. B., Wang, Z., Gu Lee, J., Kascak, A. F., & Provenza, A. J.
(2012).
Handbook of Lubrication and Tribology, Volume II. Bruce, R. W. (Eds.),
Handbook of Lubrication and Tribology, Volume II: Theory and Design, Second Edition.
55-1-55-22.
CRC Press.
-
conference paper
-
Li, X., Hu, L., & Palazzolo, A.
(2019).
A lightweight, high-speed kinetic battery for hybrid and electric vehicles. 1-6.
-
Kang, X., & Palazzolo, A.
(2019).
SIMULATION, TEST AND MITIGATION OF 1/2X FORWARD WHIRL FOLLOWING ROTOR DROP ONTO AUXILIARY BEARINGS. Journal of Engineering for Gas Turbines and Power.
-
Mohiuddin, M. W., Palazzolo, A. B., Tucker, R. P., Reddy, D. V., Provenza, A. J., & Kascak, A. F.
(2019).
HIGH TEMPERATURE MAGNETIC THRUST BEARING: THEORY AND EXPERIMENT
-
Li, Y., & Palazzolo, A.
(2018).
PM Synchronous Motor Induced Vibration. 323-328.
-
Kim, S., & Palazzolo, A.
(2018).
Shooting/continuation based bifurcation analysis of large order nonlinear rotordynamic systems. MATEC Web of Conferences.
18003-18003.
-
Anvari, B., Li, X., Toliyat, H. A., Palazzolo, A., Wang, Z., & Han, X. u.
(2017).
A Coreless Permanent-Magnet Machine for A Magnetically Levitated Shaft-Less Flywheel. 1-7.
-
Mortazavi, F., & Palazzolo, A.
(2017).
CFD-BASED PREDICTION OF ROTORDYNAMIC PERFORMANCE OF SMOOTH STATOR-GROOVED ROTOR (SS-GR) LIQUID ANNULAR SEALS
-
Kang, X., & Palazzolo, A.
(2017).
Dynamic and thermal analysis of rotor drop on sleeve type catcher bearings in magnetic bearing systems
-
Li, X., Palazzolo, A., & Wang, Z.
(2016).
ROTATING MACHINERY MONITORING AND FAULT DIAGNOSIS WITH NEURAL NETWORK ENHANCED FUZZY LOGIC EXPERT SYSTEM. v006t05a026-v006t05a026.
-
Hu, L., & Palazzolo, A.
(2016).
SOLID ELEMENT ROTORDYNAMIC MODELING OF A ROTOR ON A FLEXIBLE SUPPORT STRUCTURE UTILIZING MIMO SUPPORT TRANSFER FUNCTIONS. v07at30a008-v07at30a008.
-
Tong, X., & Palazzolo, A.
(2016).
THE INFLUENCE OF HYDRODYNAMIC BEARING CONFIGURATION ON MORTON EFFECT. v07bt31a017-v07bt31a017.
-
Li, X., Palazzolo, A., Tingey, D., Han, X. u., McMullen, P., & Wang, Z.
(2016).
SHAFT-LESS ENERGY STORAGE FLYWHEEL. v002t13a001-v002t13a001.
-
Zhang, X., Palazzolo, A., Kweon, C., Thomas, E., Tucker, R., & Kascak, A.
(2014).
Direct Fuel Injector Temporal Measurements. SAE Technical Papers.
-
Saeed, A., Palazzolo, A., & Ahmed, S.
(2013).
A NOVEL MAGNETICALLY-LEVITATED FLYWHEEL ENERGY STORAGE ALTERNATIVE TO LITHIUM-ION BATTERY PACKS FOR OILFIELD SERVICE. 525-534.
-
Lee, J. G., & Palazzolo, A.
(2013).
TWO DIMENSIONAL MODIFIED REYNOLDS EQUATION INCLUDING PRESSURE DEPENDENT VISCOSITY EFFECT. 201-203.
-
Han, X. u., & Palazzolo, A. B.
(2013).
VFD Machinery Vibration Fatigue Life and Multilevel Inverter Effect. IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS.
2562-2575.
-
Han, X. u., & Palazzolo, A. B.
(2012).
VFD Machinery Vibration Fatigue Life and Multi-Level Inverter Effect. Conference Record of the IEEE Industry Applications Conference.
1-15.
-
Lee, J. G., & Palazzolo, A.
(2012).
CATCHER BEARING LIFE PREDICTION USING A RAINFLOW COUNTING APPROACH. 233-235.
-
Mongkolcheep, K., Palazzolo, A., Ruimi, A., & Tucker, R.
(2010).
A modal approach for chaotic vibrations of a drillstring. 1305-1314.
-
Mongkolcheep, K., Palazzolo, A., Ruimi, A., & Tucker, R.
(2010).
A MODAL APPROACH FOR CHAOTIC VIBRATIONS OF A DRILLSTRING. 1305-1314.
-
Ahmed, S., Tafreshi, R., Palazzolo, A., & Tucker, R.
(2009).
Drilling Rig Fuel and Emissions Reduction Through Regenerative Braking, Load Leveling and Grid Drilling. 2765-2769.
-
Hockney, D., Ansbigian, D., Polimeno, M., Spears, W., Palazzolo, A., & Pekarek, S.
(2008).
Extreme energy density flywheel energy storage system for space applications
-
Palazzolo, A., Tucker, R., Kenny, A., Kang, K., Ghandi, V., Liu, J., Choi, H., & Provenza, A.
(2008).
HIGH TEMPERATURE, PERMANENT MAGNET BIASED, FAULT TOLERANT, HOMOPOLAR MAGNETIC BEARING DEVELOPMENT. 1203-1214.
-
Lei, S., Provenza, A., Palazzolo, A., & Beach, R.
(2008).
Implementation of magnetic suspension control with FPGA. 2035-2040.
-
Lei, S., Palazzolo, A., & Kascak, A.
(2007).
Fuzzy logic intelligent control system of magnetic bearings. IEEE International Conference on Fuzzy Systems.
570-+.
-
Park, J., Palazzolo, A., & Beach, R.
(2006).
Integrated Power and Attitude Control (IPAC) of a satellite via magnetic bearing supported, flexible shaft flywheels. 5523-5547.
-
Lei, S., & Palazzolo, A.
(2006).
Real time digital control of magnetic bearings with microprocessors. 154-+.
-
Li, M. H., Palazzolo, A., & Provenza, A. J.
(2005).
Adaptive control for the magnetic suspension of an energy storage flywheel. 1156-1175.
-
Little, F. E., & Palazzolo, A.
(2005).
Testing of magnetic bearings for flywheel energy storage in simulated space conditions. 1152-1156.
-
Provenza, A. J., Montague, G. T., Jansen, M. J., Palazzolo, A. B., & Jansen, R. H.
(2005).
High temperature characterization of a radial magnetic bearing for turbomachinery. Journal of Engineering for Gas Turbines and Power.
437-444.
-
Li, M. H., Palazzolo, A. B., Kenny, A., Beach, R., Provenza, A., & Kascak, A.
(2004).
Fault tolerant homopolar magnetic bearings. 881-887.
-
Jansen, M., Montague, G., Provenza, A., & Palazzolo, A.
(2004).
High speed, high temperature, fault tolerant operation of a combination magnetic-hydrostatic bearing rotor support system for turbomachinery. 599-606.
-
Li, M. F., Palazzolo, A. B., Kenny, A., Provenza, A. J., Beach, R. F., & Kascak, A. F.
(2004).
Fault-tolerant homopolar magnetic bearings. IEEE Transactions on Magnetics.
3308-3318.
-
Kenny, A., Palazzolo, A., Montague, G. T., & Kascak, A. F.
(2004).
Theory and test correlation for laminate stacking factor effect on homopolar bearing stiffness. Journal of Engineering for Gas Turbines and Power.
142-146.
-
Sun, G., Palazzolo, A. B., Carney, K., Kaushik, N., Provenza, A. J., & Lawrence, C.
(2003).
An efficient algorithm for blade loss simulations using a high fidelity ball bearing and damper model. 1011-1020.
-
Provenza, A. J., Montague, G. T., Jansen, M. J., Palazzolo, A. B., & Jansen, R. H.
(2003).
High Temperature Characterization of a Radial Magnetic Bearing for Turbomachinery. 633-642.
-
Kim, Y., Beach, R., Palazzolo, A., & Provenza, A.
(2003).
Interactions dynamics between a satellite and onboard magnetically suspended flywheels
-
Lebron, R., Jansen, R. H., Palazzolo, A., Thomas, E., Kascak, P. E., Birchenough, A. G., & Dever, T. P.
(2003).
Magnetic bearing amplifier output power filters for flywheel systems
-
Kenny, A., Palazzolo, A. B., & Provenza, A.
(2002).
An integrated magnetic circuit model and finite element model approach to magnetic bearing design. Intersociety Energy Conversion Engineering Conference.
181-184.
-
Kenny, A., Palazzolo, A. B., & Provenza, A.
(2002).
An integrated magnetic circuit model and finite element model approach to magnetic bearing design. Intersociety Energy Conversion Engineering Conference.
223-226.
-
Palazzolo, A., Kenny, A., Lei, S. L., Kim, Y., Sun, G., Chon, C. H., ... Ganesan, K.
(2002).
Flywheel magnetic suspension developments. Intersociety Energy Conversion Engineering Conference.
161-166.
-
Na, U. J., Kenny, A., & Palazzolo, A. B.
(2002).
Bi-directional magnetic bearing with fault-tolerant capability. 222-222.
-
Minihan, T., Palazzolo, A., Kim, Y., Lei, S., Kenny, A., Na, U. J., ... Kascak, A.
(2002).
Fail Safe, High Temperature Magnetic Bearings. 1107-1116.
-
Dever, T. P., Palazzolo, A. B., Thomas, E. M., & Jansen, R. H.
(2001).
Evaluation and Improvement of Eddy Current Position Sensors in Magnetically Suspended Flywheel Systems. Intersociety Energy Conversion Engineering Conference.
689-694.
-
Na, U. J., Palazzolo, A. B., Montague, G., Provenza, A., Choi, B., & Kascak, A.
(2001).
Fault tolerant control of magnetic bearings. 3135-3141.
-
Palazzolo, A., Kim, Y., Kenny, A., Na, U. J., Lei, S., Thomas, E., ... Montague, G.
(2001).
Magnetic suspensions for flywheel batteries. Intersociety Energy Conversion Engineering Conference.
97-103.
-
Kenny, A., Provenza, A., Na, U. J., Palazzolo, A., Beach, R., Kascak, A., ... Lei, S.
(2001).
Novel actuator for magnetic suspensions of flywheel batteries. Intersociety Energy Conversion Engineering Conference.
111-117.
-
Moore, J. J., & Palazzolo, A. B.
(2001).
Rotordynamic force prediction of whirling centrifugal impeller shroud passages using computational fluid dynamic techniques. Journal of Engineering for Gas Turbines and Power.
910-918.
-
Palazzolo, A., Montague, G. T., Kim, Y., Kenny, A., Tucker, R., Na, U. J., ... Kascak, A. F.
(2001).
Fail Safe, High Temperature Magnetic Bearing for High Efficiency Gas Turbine Engine Applications. v004t03a054-v004t03a054.
-
Kenny, A., Palazzolo, A., Montague, G. T., & Kascak, A. F.
(2001).
Theory and Test Correlation for Laminate Stacking Factor Effect on Homopolar Bearing Stiffness. v004t03a053-v004t03a053.
-
Pichot, M. A., Kajs, J. P., Murphy, B. R., Ouroua, A., Rech, B. M., Hayes, R. J., ... Palazzolo, A. B.
(2001).
Active magnetic bearings for energy storage systems for combat vehicles. IEEE Transactions on Magnetics.
318-323.
-
Moore, J. J., & Palazzolo, A. B.
(1999).
Rotordynamic Force Prediction of Whirling Centrifugal Impeller Shroud Passages Using Computational Fluid Dynamic Techniques. v004t03a036-v004t03a036.
-
Palazzolo, A., Li, M., Kenny, A., Lei, S., Havelka, D., & Kascak, A.
(1998).
Magnetic bearing development for support of satellite flywheels. AIP Conference Proceedings.
685-692.
-
Palazzolo, A., Bhattacharya, A., Venkataraman, B., Athavale, M., Ryan, S., & Funston, K.
(1997).
Developments in impeller/seal secondary flow path modeling for dynamic force coefficients and leakage. NASA Conference Publication.
209-228.
-
Kascak, A. F., Montague, G. T., Brown, G. V., & Palazzolo, A. B.
(1997).
New 1000 F magnetic bearing test rig. NASA Conference Publication.
30.
-
Venkataraman, B., & Palazzolo, A. B.
(1996).
Effects of wall flexibility on the rotordynamic coefficients of turbulent cryogenic annular seals. Journal of Tribology.
509-519.
-
Palazzolo, A. B., Venkataraman, B., Padavala, S. S., Ryan, S., Vallely, P., & Funston, K.
(1996).
Liquid annular seal research. NASA Conference Publication.
299-313.
-
Venkataraman, B., & Palazzolo, A. B.
(1995).
Effects of wall flexibility on the rotordynamic coefficients of turbulent cryogenic annular seals. American Society of Mechanical Engineers (Paper).
-
BARRETT, T. S., PALAZZOLO, A. B., & KASCAK, A. F.
(1995).
ACTIVE VIBRATION CONTROL OF ROTATING MACHINERY USING PIEZOELECTRIC ACTUATORS INCORPORATING FLEXIBLE CASING EFFECTS. Journal of Engineering for Gas Turbines and Power.
176-187.
-
Gadangi, R. K., & Palazzolo, A. B.
(1995).
Blade loss simulation of multi mass rotor model with nonlinear tilt pad journal bearings
-
Gadangi, R. K., & Palazzolo, A. B.
(1995).
Blade loss simulation of multi mass rotor model with nonlinear tilt pad journal bearings. American Society of Mechanical Engineers (Paper).
-
McElhaney, J. M., Palazzolo, A., & Kascak, A.
(1995).
Modeling and simulation methods for MDOF structures and rotating machinery with impact dampers
-
McElhaney, J. M., Palazzolo, A., & Kascak, A.
(1995).
Modeling and simulation methods for MDOF structures and rotating machinery with impact dampers. American Society of Mechanical Engineers (Paper).
-
Manchala, D. W., Palazzolo, A. B., Kascak, A. F., Montague, G. T., & Brown, G. V.
(1994).
Active vibration control of sudden mass imbalance in rotating machinery. 133-148.
-
Kim, C., Palazzolo, A. B., Tang, P., Manchala, D., Kascak, A., Brown, G., Montague, G., & Klusman, S.
(1994).
Eddy current effects on the stability of an active magnetic bearing levitated rotor. 421-440.
-
Manchala, D. W., Palazzolo, A. B., Kascak, A. F., Montague, G. T., Brown, G. V., Lawrence, C., & Klusman, S.
(1994).
In Operation Detection and Correction of Rotor Imbalance in Jet Engines Using Active Vibration Control. SAE Technical Papers.
-
Tang, P., Palazzolo, A. B., Kascak, A. F., & Montague, G. T.
(1994).
Active Vibration Control of Rotating Machinery With a Hybrid Piezo-Hydraulic Actuator System. v005t14a005-v005t14a005.
-
Tang, P., Palazzolo, A. B., Kascak, A. F., & Montague, G. T.
(1994).
Active vibration control of rotating machinery with a hybrid piezo-hydraulic actuator system. American Society of Mechanical Engineers (Paper).
1-10.
-
PADAVALA, S., PALAZZOLO, A. B., VALLELY, P., & RYAN, S.
(1994).
SIMULATION STUDY WITH ARBITRARY PROFILE LIQUID ANNULAR SEALS. Tribology Transactions.
667-678.
-
KIM, J., PALAZZOLO, A. B., & GADANGI, R. K.
(1994).
TEHD ANALYSIS FOR TILTING-PAD JOURNAL BEARINGS USING UPWIND FINITE-ELEMENT METHOD. ASLE transactions.
771-783.
-
Tang, P., Palazzolo, A., Kascak, A., & Li, W.
(1993).
Combined piezoelectric-hydraulic actuator based active vibration control for rotor-dynamic system. 223-241.
-
Kim, J., & Palazzolo, A.
(1993).
Dynamic characteristics of TEHD tilt pad journal bearing simulations including multiple mode pad flexibility model. 363-379.
-
Moore, J. J., Palazzolo, A., Gadangi, R., Nale, T. A., & Klusman, S. A.
(1993).
Forced response analysis and application of impact dampers to rotordynamic vibration suppression in a cryogenic environment. 11-24.
-
Barrett, T. S., Palazzolo, A. B., & Kascak, A. F.
(1993).
Active Vibration Control of Rotating Machinery Using Piezoelectric Actuators Incorporating Flexible Casing Effects. v03bt16a049-v03bt16a049.
-
Tang, P., Palazzolo, A. B., Brown, G., DiRusso, E., & Kascak, A.
(1993).
An Electromechanical Simulation Method for Active Vibration Control of a Magnetic Bearing Supported Rotor. v03ct17a043-v03ct17a043.
-
Palazzolo, A. B., Jagannathan, S., Kascak, A. F., Griffin, T., Giriunas, J., & Montague, G. T.
(1993).
Piezoelectric Actuator-Active Vibration Control of the Shaft Line for a Gas Turbine Engine Test Stand. v03bt16a018-v03bt16a018.
-
Jagannathan, S., Palazzolo, A. B., Kascak, A. F., & Montague, G. T.
(1993).
Robust Controller Design for Active Vibration Control. v03bt16a017-v03bt16a017.
-
LIN, R. R., PALAZZOLO, A. B., KASCAK, A. F., & MONTAGUE, G. T.
(1993).
ELECTROMECHANICAL SIMULATION AND TESTING OF ACTIVELY CONTROLLED ROTORDYNAMIC SYSTEMS WITH PIEZOELECTRIC ACTUATORS. Journal of Engineering for Gas Turbines and Power.
324-335.
-
Barrett, T. S., & Palazzolo, A. B.
(1993).
Active vibration control of rotating machinery using piezoelectric actuators incorporating flexible casing effects. American Society of Mechanical Engineers (Paper).
1-14.
-
Palazzolo, A. B., Jagannathan, S., Kascak, A. F., Griffin, T., & Giriunas, J.
(1993).
Piezoelectric actuator-active vibration control of the shaft line for a gas turbine engine test stand. American Society of Mechanical Engineers (Paper).
1-12.
-
Jagannathan, S., Palazzolo, A. B., Kascak, A. F., & Montague, G. T.
(1993).
Robust controller design for active vibration control. American Society of Mechanical Engineers (Paper).
1-11.
-
Lin, R. R., Palazzolo, A. B., Kascak, A. F., & Montague, G. T.
(1991).
Electromechanical simulation and testing of actively controlled rotordynamic systems with piezoelectric actuators. American Society of Mechanical Engineers (Paper).
-
Palazzolo, A. B., Jagannathan, S., Montague, G. T., Kascak, A. F., & Kiraly, L. J.
(1991).
Hybrid active vibration control of rotorbearing systems using piezoelectric actuators. 227-240.
-
Earles, L. L., Palazzolo, A. B., & Armentrout, R. W.
(1990).
A Finite Element Approach to Pad Flexibility Effects in Tilt Pad Journal Bearings: Part IIAssembled Bearing and System Analysis. Journal of Tribology.
178-182.
-
Earles, L. L., Palazzolo, A. B., & Armentrout, R. W.
(1989).
Finite element approach to pad flexibility effects in tilt pad journal bearings. Part II. Assembled bearing and system analysis. American Society of Mechanical Engineers (Paper).
-
Palazzolo, A. B., Lin, R. R., Kascak, A. F., Montague, J., & Alexander, R. M.
(1989).
Test and theory for piezoelectric actuator-active vibration control of rotating machinery. 367-374.
-
Palazzolo, A. B., Lin, R. R., Kascak, A. F., & Alexander, R. M.
(1988).
ACTIVE CONTROL OF TRANSIENT ROTORDYNAMIC VIBRATION BY OPTIMAL CONTROL METHODS. American Society of Mechanical Engineers (Paper).
-
Earles, L. L., Palazzolo, A. B., Lee, C. K., & Gerhold, C. H.
(1987).
HYBRID FINITE ELEMENT - BOUNDARY ELEMENT SIMULATION OF ROTATING MACHINERY SUPPORTED ON FLEXIBLE FOUNDATION AND SOIL. 371-382.
-
Kascak, A. F., Palazzolo, A. B., & Montaque, G.
(1987).
TRANSIENT ROTOR DYNAMIC RUB PHENOMENA THEORY AND TEST. 485-494.
-
Palazzolo, A. B., Smalley, A. J., & Lifshits, A.
(1985).
RECENT DEVELOPMENTS IN SIMULATING RECIPROCATING COMPRESSOR MANIFOLDS FOR VIBRATION CONTROL. American Society of Mechanical Engineers (Paper).
-
Palazzolo, A. B., Wang, B. P., & Pilkey, W. D.
(1983).
COMPONENT SYNTHESIS OF MULTI-CASE, ROTATING MACHINERY TRAINS BY THE GENERALIZED RECEPTANCE APPROACH. American Society of Mechanical Engineers (Paper).
-
Palazzolo, A. B., Wang, B. P., & Pilkey, W. D.
(1983).
Eigensolution Reanalysis of Rotor Dynamic Systems by the Generalized Receptance Method. J ENG POWER TRANS ASME.
543-550.
-
Wang, B. P., Kitis, L., Pilkey, W. D., & Palazzolo, A. B.
(1982).
HELICOPTER VIBRATION REDUCTION BY LOCAL STRUCTURAL MODIFICATION. Journal- American Helicopter Society.
43-47.
-
Palazzolo, A. B., Wana, R. P., & Pilkey, W. D.
(1982).
Eigensolution reanalysis of rotor dynamic systems by the generalized receptance method
-
Palazzolo, A. B., & Gunter, E. J.
(1982).
MODAL BALANCING OF A MULTI-MASS FLEXIBLE ROTOR WITHOUT TRIAL WEIGHTS. American Society of Mechanical Engineers (Paper).
-
Palazzolo, A. B., & Gunter, E. J.
(1982).
Modal balancing of a multi-mass flexible rotor without trial weights
-
Li, X., Hu, L., & Palazzolo, A.
(2019).
A lightweight, high-speed kinetic battery for hybrid and electric vehicles. 1-6.
-
patent
-
Palazzolo, A., Tucker, R., & Wang, Z.
(2014).
Shaft-less energy storage flywheel
-
Provenza, A., Beach, R., Kascak, A., Palazzolo, A., Li, M., Kenny, A., ... Kascak, A.
(2008).
Fault tolerant homopolar magnetic bearings
-
Palazzolo, A., Li, M. u., Na, U., & Thomas, E.
(2001).
System and method for controlling suspension using a magnetic field
-
Palazzolo, A., Tucker, R., & Wang, Z.
(2014).
Shaft-less energy storage flywheel
Research
principal investigator on
- Full Scale, High Temperature and High Pressure Industry Test-bed for Increased Horizontal and Vertical Drilling Efficiency and Reliability awarded by Qatar Foundation - (Doha, Qatar) 2018 - 2021
- Energy Storage Flywheels to Enable Renewable Energy and for Uninterruptible Power Source Service awarded by Qatar National Research Fund - (Doha, Qatar) 2016 - 2020
co-principal investigator on
Teaching
teaching activities
- MEEN364 Dynamic Syst And Control Instructor
- MEEN431 Adv Syst Dynamic & Cntrl Instructor
- MEEN485 Directed Studies Instructor
- MEEN491 Hnr-research Instructor
- MEEN617 Mechanical Vibration Instructor
- MEEN639 Dynamics Rotating Mach Instructor
- MEEN649 Nonlinear Dynamical Systems Instructor
- MEEN672 Intro Finite Elements Instructor
- MEEN684 Professional Internship Instructor
- MEEN684 Professional Internship Instructor
- MEEN685 Directed Studies Instructor
- MEEN691 Research Instructor
Works By Students
chaired theses and dissertations
-
Abdelzaher, Omar Mohamed (2014-08). Downhole Wireline Mechatronics and Drillstring Vibration Dynamics.
-
Browne, Michael (2009-05). Superharmonic nonlinear lateral vibrations of a segmented driveline incorporating a tuned damper excited by non-constant velocity joints.
-
Desireddy, Vijesh R. (2008-12). Test-Theory Correlation Study for an Ultra High Temperature Thrust Magnetic Bearing.
-
Dibua, Imoukhuede Tim Odion (2006-12). Development of a high power density motor for aircraft propulsion.
-
Gandhi, Varun R. (2009-05). High Temperature, Permanent Magnet Biased Magnetic Bearings.
-
Han, Xu (2010-12). Analysis and Simulation of Mechanical Trains Driven by Variable Frequency Drive Systems.
-
Han, Xu 1986- (2015-05). Discussion of Induction Motor Effect on Rotordynamics.
-
Hu, Lingnan (2018-11). Improved Finite Element Modeling and Dynamic Analysis of Rotating Machinery and a Drillstring with Impact Dampers.
-
Kang, Kyungdae (2010-12). Nonlinear Dynamics of a Rotor Supported by Homopolar Magnetic Bearings with Saturation.
-
Kang, Xiao (2019-03). Simulation and Test of the Auxiliary Bearings and Their Dampers in Magnetic Bearing Systems.
-
Kim, Eunseok (2016-10). CFD Based Prediction of Rotordynamic Coefficients and Stability Analysis for Centrifugal Pump/Compressor.
-
Kim, Sitae (2016-11). Nonlinear Response and Bifurcations Analysis of Rotor-Fluid Film Bearing Systems.
-
Lee, Jung Gu (2012-05). A Nonlinear Transient Approach for Morton Synchronous Rotordynamic Instability and Catcher Bearing Life Predictions.
-
Li, Wende (2019-03). Prediction of the Concentration Polarization and the Fouling Formation in Membrane Desalination Processes.
-
Li, Xiaojun (2018-05). Design and Development of a Next Generation Energy Storage Flywheel.
-
Li, Yashu (2019-03). Finite Element Analysis of Motor Eccentric Forces and Effects on Vibration.
-
Malik, Darren R. (2010-05). Evaluation of Composite Alumina Nanoparticle and Nitrate Eutectic Materials for use in Concentrating Solar Power Plants.
-
Martinez, Matthew Aaron (2018-08). Passively Actuated Vibration to Decrease Membrane Fouling Rate for Centrifugal Reverse Osmosis.
-
Mohamed, Mohamed Tarek Mohamed Hussein (2019-11). Modeling, Simulation, and Monitoring of a Photovoltaic Application Powering a Flywheel Energy Storage System.
-
Mohsenizadeh, Navid (2010-08). Simulation Methodologies for Satellite Solar Array Dynamics.
-
Mongkolcheep, Kathira (2009-08). A Lyapunov Exponent Approach for Identifying Chaotic Behavior in a Finite Element Based Drillstring Vibration Model.
-
Mortazavi, Farzam (2018-10). CFD-Based Impeller and Seal Rotordynamic Forces.
-
Narayanaswamy, Ashwanth (2011-05). Study of Catcher Bearings for High Temperature Magnetic Bearing Application.
-
Park, Junyoung (2008-05). MIMO active vibration control of magnetically suspended flywheels for satellite IPAC service.
-
Reyna, Ruben (2013-12). Specific Energy and Energy Density Analysis of Conventional and NonConventional Flywheels.
-
Saeed, Ahmed (2012-05). Vibration Suppression and Flywheel Energy Storage in a Drillstring Bottom-Hole-Assembly.
-
Shaw, John (2015-12). Predicting Pulsations and Surge in Mixed Reciprocating and Centrifugal Compressor Piping Systems.
-
Su, Xu (2018-11). Concentration Polarization and Colloidal Fouling in the Vibration Enhanced Reverse Osmosis Membrane Desalination System.
-
Suh, Junho (2014-08). High Fidelity Simulation of Rotordynamic Morton Effect by Nonlinear Transient Approach.
-
Tingey, Dustin John (2015-08). Design, Fabrication and Preliminary Testing of Experimental Rock Drilling Rig.
-
Tong, Xiaomeng (2018-03). Nonlinear Prediction of Thermally Induced Rotor Instability (Morton Effect) and Experiment Verification.
-
Trevino, Alexis (2018-05). Modular Micro-Wind Turbine for Providing Power to Train Sensing Systems.
-
Wadhvani, Vishal Ashok (2011-05). Feedback Control of a Permanent Magnet Biased, Homopolar Magnetic Bearing System.
-
Wang, Zhiyang (2011-12). A Novel Flywheel and Operation Approach for Energy Recovery and Storage.
-
Weatherwax, Scott Eric (2008-08). Use of the continuous wavelet tranform to enhance early diagnosis of incipient faults in rotating element bearings.
-
Wiesenborn, Robert Kyle (2006-12). Circular sensor array and nonlinear analysis of homopolar magnetic bearings.
-
Wilson, Joshua Kyle (2013-05). Design and Analysis of a Test Rig for Modeling the Bit/Formation Interface in Petroleum Drilling Applications.
-
Zhai, Tianbo (2016-10). Prediction of Coupling Guard Temperature and Gearbox Windage Power Loss.
-
Zhang, Xiaohua (2009-12). Vibration Isolation of a Locomotive Mounted Energy Storage Flywheel.
-
Zhang, Xiaohua (2014-12). Small Engine Flash Vapor JP-8 Fuel Injector Testing, Simulation and Development.
-
Zhang, Zhengxin (2010-08). High Temperature, Buried Permanent Magnet, Brushless DC Motor.
-
Zhong, Wan (2015-07). Multiple Objective Optimization Design of the Magnetic Bearing Supported Rotordynamic System.
Background
education and training
- Ph.D. in Mechanical Engineering, University of Virginia - (Charlottesville, Virginia, United States) 1981
- M.S. in Mechanical Engineering, University of Virginia - (Charlottesville, Virginia, United States) 1977
- B.S. in Engineering Physics - Mechanics Specialty, University of Toledo - (Toledo, Ohio, United States) 1976
awards and honors
- James J. Cain Professorship I, conferred by Texas A&M University - (College Station, Texas, United States), 2016
- TEES Endowed Professorship, conferred by Texas A&M University - (College Station, Texas, United States), 2015
- Fellow, conferred by American Society of Mechanical Engineers - (New York, New York, United States), 2006
- Association of Former Students College-Level Teaching Distinguished Achievement Award, The, conferred by Texas A&M University - (College Station, Texas, United States), 2004
- R&D 100 Award Winner, conferred by National Aeronautics and Space Administration - (Washington D.C., District of Columbia, United States), 2003
- TEES Senior Fellow, conferred by Texas A&M University - (College Station, Texas, United States), 1999
- TEES Faculty Fellow, conferred by Texas A&M University - (College Station, Texas, United States), 1996
Contact
first name
- Alan
has last name
- Palazzolo
mailing address
-
Texas A&M University
Mechanical Engineering
3123 TAMU
College Station, TX 77843-3123
USA
Other
- a-palazzolo@tamu.edu