HR job title
- Clinical Associate Professor
- Contact Info
Zandinejad, Amirali Associate Professor and Director
Positions
- Associate Professor and Director, General Dentistry, School of Dentistry
- Overview
- Publications
- Teaching
- Contact
- Other
- View All
Overview
Publications
selected publications
-
academic article
-
Khanlar, L. N., Barmak, A. B., Oh, Y., Mendha, U., Yared, S., & Zandinejad, A.
(2023).
Marginal and internal discrepancies associated with carbon digital light synthesis additively manufactured interim crowns. Journal of Prosthetic Dentistry.
S0022-3913(23)00259-7.
-
Nasiry Khanlar, L., Revilla-Len, M., Barmak, A. B., Ikeda, M., Alsandi, Q., Tagami, J., & Zandinejad, A.
(2023).
Surface roughness and shear bond strength to composite resin of additively manufactured interim restorative material with different printing orientations. 129(5), 788-795.
-
Revilla-Len, M., Gohil, A., Barmak, A. B., Zandinejad, A., Raigrodski, A. J., & Alonso Prez-Barquero, J.
(2023).
Best-Fit Algorithm Influences on Virtual Casts' Alignment Discrepancies. Journal of Prosthodontics: implant, esthetic, and reconstructive dentistry.
32(4), 331-339.
-
Zandinejad, A., Khanlar, L. N., Barmak, A. B., Ikeda, M., Tagami, J., & Masri, R.
(2023).
Shear bond strength of porcelain to milled and stereolithography additively manufactured zirconia with and without surface treatment: An invitro study. Journal of Prosthetic Dentistry.
S0022-3913(23)00113-0.
-
Khanlar, L. N., Francis, C., Basir Barmak, A., Rios, A., Ashtiani, R. E., & Zandinejad, A.
(2023).
Effect of a new support design on the marginal and internal gap of additively manufactured interim crowns using direct light deposition technology. Journal of Prosthodontics: implant, esthetic, and reconstructive dentistry.
-
Revilla-Len, M., Piedra-Cascn, W., Aragoneses, R., Sadeghpour, M., Barmak, B. A., Zandinejad, A., & Raigrodski, A. J.
(2023).
Influence of base design on the manufacturing accuracy of vat-polymerized diagnostic casts: An invitro study. 129(1), 166-173.
-
Zandinejad, A., Liang, H., Fisher Cosio, N. A., & Revilla-León, M.
(2022).
Fabrication of a complete-arch implant-supported fixed interim prosthesis by using a cone beam computed tomography digital scan for a patient with primordial dwarfism: A dental technique. Journal of Prosthetic Dentistry.
128(6), 1179-1183.
-
Beyabanaki, E., Ashtiani, R. E., Moradi, M., Namdari, M., Mostafavi, D., & Zandinejad, A.
(2022).
Biaxial flexural strength and Weibull characteristics of a resin ceramic material after thermal-cycling. Journal of Prosthodontics: implant, esthetic, and reconstructive dentistry.
-
Revilla-Len, M., Mostafavi, D., Methani, M. M., & Zandinejad, A.
(2022).
Manufacturing accuracy and volumetric changes of stereolithography additively manufactured zirconia with different porosities. Journal of Prosthetic Dentistry.
128(2), 211-215.
-
Beyabanaki, E., Eftekhar Ashtiani, R., Feyzi, M., & Zandinejad, A.
(2022).
Evaluation of Microshear Bond Strength of Four Different CAD‐CAM Polymer‐Infiltrated Ceramic Materials after Thermocycling. Journal of Prosthodontics: implant, esthetic, and reconstructive dentistry.
31(7), 623-628.
-
Chun, S., Hann, S., Khanlar, L. N., & Zandinejad, A.
(2022).
Computer-aided designand additively manufactured resin-bonded framework to retain an existing ceramic crown as the interim restoration after extraction: A dental technique. Journal of Prosthetic Dentistry.
S0022-3913(22)00360-2.
-
Revilla-Len, M., Ashby, M. T., Meyer, M. J., Zandinejad, A., & Umorin, M.
(2022).
Self-perception and self-representation preference between 2-dimensional and 3-dimensional facial reconstructions among dentists, dental students, and laypersons. Journal of Prosthetic Dentistry.
127(6), 911-917.
-
Zandinejad, A., Das, O., Barmak, A. B., Kuttolamadom, M., & Revilla‐León, M.
(2022).
The Flexural Strength and Flexural Modulus of Stereolithography Additively Manufactured Zirconia with Different Porosities. Journal of Prosthodontics: implant, esthetic, and reconstructive dentistry.
31(5), 434-440.
-
Khanlar, L. N., Abdou, A., Takagaki, T., Mori, S., Ikeda, M., Nikaido, T., Zandinejad, A., & Tagami, J.
(2022).
The effects of different silicatization and silanization protocols on the bond durability of resin cements to new high-translucent zirconia. Clinical Oral Investigations.
26(4), 3547-3561.
-
Zandinejad, A., Khanlar, L. N., Barmak, A. B., Tagami, J., & Revilla-Len, M.
(2022).
Surface Roughness and Bond Strength of Resin Composite to Additively Manufactured Zirconia with Different Porosities. Journal of Prosthodontics: implant, esthetic, and reconstructive dentistry.
31(S1), 97-104.
-
Revilla-Len, M., Abaei, D. S., Tittle, A., & Zandinejad, A.
(2022).
Additively manufactured implant abutment screw-access guide to remove a cement-retained implant crown: A technique. Journal of Prosthetic Dentistry.
127(2), 219-222.
-
Zandinejad, A., & Revilla-León, M.
(2021).
Additively Manufactured Dental Crown with Color Gradient and Graded Structure: A Technique Report. Journal of Prosthodontics: implant, esthetic, and reconstructive dentistry.
30(9), 822-825.
-
Zandinejad, A., Revilla-León, M., Methani, M. M., Nasiry Khanlar, L., & Morton, D.
(2021).
The Fracture Resistance of Additively Manufactured Monolithic Zirconia vs. Bi-Layered Alumina Toughened Zirconia Crowns When Cemented to Zirconia Abutments. Evaluating the Potential of 3D Printing of Ceramic Crowns: An In Vitro Study. Dentistry Journal.
9(10), 115-115.
-
Khanlar, L. N., Salazar Rios, A., Tahmaseb, A., & Zandinejad, A.
(2021).
Additive Manufacturing of Zirconia Ceramic and Its Application in Clinical Dentistry: A Review. Dentistry Journal.
9(9), 104-104.
-
Revilla-León, M., & Zandinejad, A.
(2021).
Two-layer additively manufactured crown: Proof of concept. Journal of Dentistry.
112, 103730-103730.
-
Mostafavi, D., Methani, M. M., Piedra-Cascn, W., Zandinejad, A., & Revilla-Len, M.
(2021).
Influence of the Rinsing Postprocessing Procedures on the Manufacturing Accuracy of Vat-Polymerized Dental Model Material. Journal of Prosthodontics: implant, esthetic, and reconstructive dentistry.
30(7), 610-616.
-
Mosier, M., Barmak, B. A., Gmez-Polo, M., Zandinejad, A., & Revilla-Len, M.
(2021).
Digital and analog vertical dimension measurements: A clinical observational study. International Journal of Prosthodontics.
34(4), 419-427.
-
Revilla-Len, M., Smith, Z., Methani, M. M., Zandinejad, A., & zcan, M.
(2021).
Influence of scan body design on accuracy of the implant position as transferred to a virtual definitive implant cast. Journal of Prosthetic Dentistry.
125(6), 918-923.
-
Revilla-Len, M., Fountain, J., Piedra-Cascn, W., zcan, M., & Zandinejad, A.
(2021).
Workflow of a fiber-reinforced composite fixed dental prosthesis by using a 4-piece additive manufactured silicone index: A dental technique. Journal of Prosthetic Dentistry.
125(4), 569-575.
-
Revilla-Len, M., Jordan, D., Methani, M. M., Piedra-Cascn, W., zcan, M., & Zandinejad, A.
(2021).
Influence of printing angulation on the surface roughness of additive manufactured clear silicone indices: An invitro study. Journal of Prosthetic Dentistry.
125(3), 462-468.
-
Mostafavi, D., Methani, M. M., Piedra-Cascn, W., Zandinejad, A., Att, W., & Revilla-Len, M.
(2021).
Influence of the polymerization post-processing procedures on the accuracy of additively manufactured dental model material. International Journal of Prosthodontics.
-
Revilla-Len, M., Campbell, H. E., Meyer, M. J., Umorin, M., Sones, A., & Zandinejad, A.
(2020).
Esthetic dental perception comparisons between 2D- and 3D-simulated dental discrepancies. Journal of Prosthetic Dentistry.
124(6), 763-773.
-
Revilla-Len, M., Methani, M. M., Morton, D., & Zandinejad, A.
(2020).
Internal and marginal discrepancies associated with stereolithography (SLA) additively manufactured zirconia crowns. Journal of Prosthetic Dentistry.
124(6), 730-737.
-
Ashtiani, R. E., Tehrani, S., Revilla-Len, M., & Zandinejad, A.
(2020).
Reducing the Risk of COVID-19 Transmission in Dental Offices: A Review. Journal of Prosthodontics: implant, esthetic, and reconstructive dentistry.
29(9), 739-745.
-
Revilla-Len, M., Jiang, P., Sadeghpour, M., Piedra-Cascn, W., Zandinejad, A., zcan, M., & Krishnamurthy, V. R.
(2020).
Intraoral digital scans: Part 2—influence of ambient scanning light conditions on the mesh quality of different intraoral scanners. Journal of Prosthetic Dentistry.
124(5), 575-580.
-
Gonzalez, A. M., Piedra-Cascn, W., Zandinejad, A., & Revilla-Len, M.
(2020).
Fiber-reinforced composite fixed dental prosthesis using an additive manufactured silicone index. Journal of Esthetic and Restorative Dentistry.
32(7), 626-633.
-
Revilla-Len, M., Jiang, P., Sadeghpour, M., Piedra-Cascn, W., Zandinejad, A., zcan, M., & Krishnamurthy, V. R.
(2020).
Intraoral digital scans—Part 1: Influence of ambient scanning light conditions on the accuracy (trueness and precision) of different intraoral scanners. Journal of Prosthetic Dentistry.
124(3), 372-378.
-
Revilla-Len, M., Ashby, M. T., Meyer, M. J., Umorin, M., Barrington, J. J., & Zandinejad, A.
(2020).
Layperson and Dental Professional Perception When Evaluating Their Own Virtually 2D or 3D Simulated Esthetic Discrepancies. Journal of Prosthodontics: implant, esthetic, and reconstructive dentistry.
29(6), 466-471.
-
Park, S. H., Piedra-Cascn, W., Zandinejad, A., & Revilla-Len, M.
(2020).
Digitally Created 3-Piece Additive Manufactured Index for Direct Esthetic Treatment. Journal of Prosthodontics: implant, esthetic, and reconstructive dentistry.
29(5), 436-442.
-
Revilla-Len, M., Raney, L., Piedra-Cascn, W., Barrington, J., Zandinejad, A., & zcan, M.
(2020).
Digital workflow for an esthetic rehabilitation using a facial and intraoral scanner and an additive manufactured silicone index: A dental technique. Journal of Prosthetic Dentistry.
123(4), 564-570.
-
Methani, M. M., Revilla-Len, M., & Zandinejad, A.
(2020).
The potential of additive manufacturing technologies and their processing parameters for the fabrication of all-ceramic crowns: A review. Journal of Esthetic and Restorative Dentistry.
32(2), 182-192.
-
Revilla-Len, M., Fogarty, R., Barrington, J. J., Zandinejad, A., & zcan, M.
(2020).
Influence of scan body design and digital implant analogs on implant replica position in additively manufactured casts. Journal of Prosthetic Dentistry.
124(2), 202-210.
-
Revilla-Len, M., Meyer, M. J., Zandinejad, A., & zcan, M.
(2020).
Additive manufacturing technologies for processing zirconia in dental applications. International Journal of Computerized Dentistry.
23(1), 27-37.
-
Revilla-Len, M., Fountain, J., Piedra-Cascn, W., Zandinejad, A., & zcan, M.
(2019).
Silicone Additive Manufactured Indices Performed from a Virtual Diagnostic Waxing for Direct Composite Diastema Closure Combined with Resin Infiltration Technique on White Spot Lesions: A Case Report. Journal of Prosthodontics: implant, esthetic, and reconstructive dentistry.
28(8), 855-860.
-
Zandinejad, A., Methani, M. M., Schneiderman, E. D., Revilla-Len, M., & Bds, D. M.
(2019).
Fracture Resistance of Additively Manufactured Zirconia Crowns when Cemented to Implant Supported Zirconia Abutments: An in vitro Study. Journal of Prosthodontics: implant, esthetic, and reconstructive dentistry.
28(8), 893-897.
-
Revilla-Len, M., Fountain, J., Piedra Cascn, W., zcan, M., & Zandinejad, A.
(2019).
Workflow description of additively manufactured clear silicone indexes for injected provisional restorations: A novel technique. Journal of Esthetic and Restorative Dentistry.
31(3), 213-221.
-
Revilla-Len, M., Meyers, M. J., Zandinejad, A., & zcan, M.
(2019).
A review on chemical composition, mechanical properties, and manufacturing work flow of additively manufactured current polymers for interim dental restorations. Journal of Esthetic and Restorative Dentistry.
31(1), 51-57.
-
Revilla-Len, M., Meyer, M. J., Barrington, J. J., Sones, A., Umorin, M. P., Taleghani, M., & Zandinejad, A.
(2019).
Perception of occlusal plane that is nonparallel to interpupillary and commissural lines but with the maxillary dental midline ideally positioned. Journal of Prosthetic Dentistry.
122(5), 482-490.
-
Najafi, A., Ashraghi, M., Chou, J., Morton, D., & Zandinejad, A.
(2016).
Survival of cast-metal, resin-bonded fixed partial dental prostheses after nearly 20-year follow-up: A retrospective study. Journal of Prosthetic Dentistry.
116(4), 507-515.
-
Miyanaji, H., Zhang, S., Lassell, A., Zandinejad, A., & Yang, L. i.
(2016).
Process Development of Porcelain Ceramic Material with Binder Jetting Process for Dental Applications. Journal of Metals.
68(3), 831-841.
-
Miyanaji, H., Zhang, S., Lassell, A., Zandinejad, A. A., & Yang, L. i.
(2016).
Optimal Process Parameters for 3D Printing of Porcelain Structures. Procedia Manufacturing.
5, 870-887.
-
Abdel-Azim, T., Rogers, K., Elathamna, E., Zandinejad, A., Metz, M., & Morton, D.
(2015).
Comparison of the marginal fit of lithium disilicate crowns fabricated with CAD/CAM technology by using conventional impressions and two intraoral digital scanners. Journal of Prosthetic Dentistry.
114(4), 554-559.
-
Abdel-Azim, T., Zandinejad, A., Metz, M., & Morton, D.
(2015).
Maxillary and Mandibular Rehabilitation in the Esthetic Zone Using a Digital Impression Technique and CAD/CAM-fabricated Prostheses: A Multidisciplinary Clinical Report. Operative Dentistry.
40(4), 350-356.
-
Lin, W. S., Zandinejad, A., Metz, M. J., Harris, B. T., & Morton, D.
(2015).
Predictable Restorative Work Flow for Computer-Aided Design/Computer-Aided Manufacture-Fabricated Ceramic Veneers Utilizing a Virtual Smile Design Principle. Operative Dentistry.
40(4), 357-363.
-
Metz, M. J., Miller, C. J., Lin, W. S., Abdel-Azim, T., Zandinejad, A., & Crim, G. A.
(2015).
Dental student perception and assessment of their clinical knowledge in educating patients about preventive dentistry. European Journal Of Dental Education.
19(2), 81-86.
-
Zandinejad, A., Lin, W. S., Atarodi, M., Abdel-Azim, T., Metz, M. J., & Morton, D.
(2015).
Digital workflow for virtually designing and milling ceramic lithium disilicate veneers: a clinical report. Operative Dentistry.
40(3), 241-246.
-
Zandinejad, A., Metz, M., Stevens, P., Lin, W., & Morton, D.
(2015).
Virtually designed and CAD/CAM-fabricated lithium disilicate prostheses for an esthetic maxillary rehabilitation: a senior dental student clinical report. Journal of Prosthetic Dentistry.
113(4), 282-288.
-
Zandinejad, A., Atarodi, M., Abdel-Azim, T., Leonhart, R. M., & Morton, D.
(2015).
Complete oral rehabilitation of a patient with hereditary gingival fibromatosis: a clinical report. Journal of Prosthetic Dentistry.
113(1), 1-7.
-
Abdel-Azim, T., Zandinejad, A., Elathamna, E., Lin, W., & Morton, D.
(2014).
The influence of digital fabrication options on the accuracy of dental implant-based single units and complete-arch frameworks. 29(6), 1281-1288.
-
Metz, M., Lin, W., Miller, C., ZandiNejad, A., Abdel-Azim, T., & Morton, D.
(2014).
Resources for a Novel Laboratory Quality Assurance Program: Operating Procedures. MedEdPORTAL.
-
Lin, W., Harris, B. T., Zandinejad, A., Martin, W. C., & Morton, D.
(2014).
Use of prefabricated titanium abutments and customized anatomic lithium disilicate structures for cement-retained implant restorations in the esthetic zone. Journal of Prosthetic Dentistry.
111(3), 181-185.
-
Metz, M. J., Abdel-Azim, T., Miller, C. J., Lin, W., ZandiNejad, A., Oliveira, G. M., & Morton, D.
(2014).
Implementation of a laboratory quality assurance program: the Louisville experience. Journal of Dental Education.
78(2), 195-205.
-
Lin, W., Harris, B. T., Zandinejad, A., & Morton, D.
(2014).
CAD/CAM-fabricated telescopic prostheses on periodontally compromised abutments of a patient undergoing intravenous bisphosphonate treatment for osteoporosis: a case report. General Dentistry.
62(3), e1-e3.
-
Lin, W., Harris, B. T., Zandinejad, A., & Morton, D.
(2014).
Use of digital data acquisition and CAD/CAM technology for the fabrication of a fixed complete dental prosthesis on dental implants. Journal of Prosthetic Dentistry.
111(1), 1-5.
-
Zandinejad, A., Abdel-Azim, T., Lin, W., & Morton, D.
(2013).
Fabrication of a fixed multipurpose template retained by existing dental implants. 110(2), 144-146.
-
Lin, W., Starr, T. L., Harris, B. T., Zandinejad, A., & Morton, D.
(2013).
Additive manufacturing technology (direct metal laser sintering) as a novel approach to fabricate functionally graded titanium implants: preliminary investigation of fabrication parameters. International Journal of Oral and Maxillofacial Implants.
28(6), 1490-1495.
-
Zandinejad, A. A., Atai, M., & Pahlevan, A.
(2006).
The effect of ceramic and porous fillers on the mechanical properties of experimental dental composites. Dental Materials.
22(4), 382-387.
-
Khanlar, L. N., Barmak, A. B., Oh, Y., Mendha, U., Yared, S., & Zandinejad, A.
(2023).
Marginal and internal discrepancies associated with carbon digital light synthesis additively manufactured interim crowns. Journal of Prosthetic Dentistry.
S0022-3913(23)00259-7.
-
chapter
-
Yang, L. i., Miyanaji, H., Ram, D. J., Zandinejad, A., & Zhang, S.
(2016).
FUNCTIONALLY GRADED CERAMIC BASED MATERIALS USING ADDITIVE MANUFACTURING: REVIEW AND PROGRESS. Ceramic Transactions.
Additive Manufacturing and Strategic Technologies in Advanced Ceramics.
(pp. 43-55).
Wiley.
-
Yang, L. i., Miyanaji, H., Ram, D. J., Zandinejad, A., & Zhang, S.
(2016).
FUNCTIONALLY GRADED CERAMIC BASED MATERIALS USING ADDITIVE MANUFACTURING: REVIEW AND PROGRESS. Ceramic Transactions.
Additive Manufacturing and Strategic Technologies in Advanced Ceramics.
(pp. 43-55).
Wiley.
Teaching
teaching activities
- AEGD600 Clinical Dentistry I Instructor
- AEGD601 Clinical Dentistry Ii Instructor
- AEGD602 Clinical Dentistry Iii Instructor
- AEGD603 Implant Dentistry Instructor
- AEGD604 Practice Management I Instructor
- AEGD605 Practice Management Ii Instructor
- AEGD606 Adv Removable Prosthodontics Instructor
- AEGD607 Adv Fixed Prosthodontics Instructor
- AEGD608 Adv Clinical Periodontics Instructor
- AEGD611 Adv Clinical Endodontics I Instructor
- AEGD614 Adv Dent For Spec Care Patient Instructor
- AEGD615 Trtmt Planning Conference I Instructor
- AEGD616 Trtmt Planning Conference Ii Instructor
- AEGD617 Trtmt Planning Conference Iii Instructor
- AEGD618 Current Literature Review I Instructor
- AEGD619 Current Literature Review Ii Instructor
- AEGD620 Current Literature Review Iii Instructor
- AEGD623 Clinical Pathology Iii Instructor
- AEGD625 Curr Concpts In Oper Dentistry Instructor
- AEGD626 Adv Rest Dent Digital Tech Instructor
- AEGD689 Sptp: Implant Guided Surgery Instructor
Contact
first name
- Amirali
has last name
- Zandinejad
mailing address
-
Texas A&M Health Science Center
General Dentistry
3302 Gaston Ave.
Dallas, TX 75246
USA
Other
- zandinejad@tamhsc.edu