HR job title
- Professor
- Contact Info
Schoenung, Julie Professor
Positions
- Professor, Materials Science and Engineering, College of Engineering
- Professor, Mechanical Engineering, College of Engineering
- Overview
- Publications
- Teaching
- Contact
- Other
- View All
Overview
Publications
selected publications
-
academic article
-
Schwartz, E., He, H., Frost, K., Nguyen, B. H., Ogunseitan, O. A., & Schoenung, J. M.
(2024).
Comparative life cycle assessment of copper and gold recovery from waste printed circuit boards: pyrometallurgy, chemical leaching and bioleaching. JOURNAL OF HAZARDOUS MATERIALS.
134545-134545.
-
Acord, K. A., Dupuy, A. D., Chen, Q. N., & Schoenung, J. M.
(2024).
Manipulating ionic conductivity through chemical modifications in solid-state electrolytes prepared with binderless laser powder bed fusion processing. JPhys Energy.
6(2), 025006-025006.
-
Svetlizky, D., Zheng, B., Wang, X., Jiang, S., Valdevit, L., Schoenung, J. M., Lavernia, E. J., & Eliaz, N.
(2024).
Towards a self-healing aluminum metal matrix composite: Design, fabrication, and demonstration. Applied Materials Today.
37, 102148-102148.
-
He, H., Schwartz, E., Ogunseitan, O. A., & Schoenung, J. M.
(2024).
Nanopowders from waste printed circuit boards: Review and evaluation from an alternatives assessment perspective. Resources, Conservation and Recycling.
201, 107327-107327.
-
Vahidi, H., Lam, B., Dupuy, A., Cortez, J., Garg, P., Rupert, T., Schoenung, J., & Bowman, W. J.
(2023).
Mixed Ionic Electronic Conduction Caused by Phase Transformation and Interfacial Segregation in an Entropy Stabilized Oxide. ECS Meeting Abstracts.
MA2023-02(46), 2263-2263.
-
Ibrahim, M. G., He, H., Schoenung, J. M., & Ogunseitan, O. A.
(2023).
Challenges and Opportunities of Increasing Materials Circularity: A Focus on Critical Metal Recovery from Electronic Waste. JOM.
75(12), 5021-5024.
-
El-Azab, S. A., Zhang, C., Jiang, S., Vyatskikh, A. L., Valdevit, L., Lavernia, E. J., & Schoenung, J. M.
(2023).
In situ observation of melt pool evolution in ultrasonic vibration-assisted directed energy deposition. Scientific Reports.
13(1), 17705.
-
Yu, K., Wang, X., Mahajan, S., Beyerlein, I. J., Cao, P., Rupert, T. J., Schoenung, J. M., & Lavernia, E. J.
(2023).
Twin nucleation from disconnection-dense sites between stacking fault pairs in a random defect network. Materialia.
30, 101835-101835.
-
Vyatskikh, A. L., Wang, X., Haley, J., Zheng, B., Valdevit, L., Lavernia, E. J., & Schoenung, J. M.
(2023).
Residual stress mitigation in directed energy deposition. Materials Science & Engineering: A.
871, 144845-144845.
-
Schoenung, J. M., & Olivetti, E. A.
(2023).
Sustainable development of materials: Broadening stakeholder engagement. MRS bulletin.
48(4), 362-367.
-
Wang, X., Cortez, J., Dupuy, A. D., Schoenung, J. M., & Bowman, W. J.
(2023).
High entropy oxide (Co,Cu,Mg,Ni,Zn)O exhibits grain size dependent room temperature deformation. MATERIALS RESEARCH LETTERS.
11(3), 196-204.
-
Dupuy, A. D., Chellali, M. R., Hahn, H., & Schoenung, J. M.
(2023).
Nucleation and growth behavior of multicomponent secondary phases in entropy-stabilized oxides. Journal of Materials Research.
38(1), 198-214.
-
Wang, X., Zheng, B., Chen, H., Liu, D., Yu, K., MacDonald, B. E., ... Schoenung, J. M.
(2023).
Deformation behavior of cell walls in an additively manufactured hybrid metallic foam. ADDITIVE MANUFACTURING.
61, 103365-103365.
-
MacDonald, B. E., Zheng, B., Fields, B., Wang, X., Jiang, S., Cao, P., ... Schoenung, J. M.
(2023).
Influence of co-deposition strategy on the mechanical behavior of additively manufactured functionally integrated materials. ADDITIVE MANUFACTURING.
61, 103328-103328.
-
Yaddanapudi, K., Kumar, M. A., Wang, J., Wang, X., Rupert, T. J., Lavernia, E. J., ... Mahajan, S.
(2023).
Local hardening and asymmetric twin growth by twin-twin interactions in a Mg alloy. Journal of Magnesium and Alloys.
11(1), 176-191.
-
Zhang, C., Yu, Q., Tang, Y. T., Xu, M., Wang, H., Zhu, C., ... Lavernia, E. J.
(2023).
Strong and ductile FeNiCoAl-based high-entropy alloys for cryogenic to elevated temperature multifunctional applications. 242, 118449-118449.
-
Dupuy, A. D., & Schoenung, J. M.
(2022).
Morphological evolution in nanostructured secondary phases in entropy stabilized oxides. Materials Characterization.
193, 112301-112301.
-
Ogunseitan, O. A., Schoenung, J. M., Lincoln, J., Nguyen, B. H., Strauss, K., Frost, K., ... Ibrahim, M.
(2022).
Biobased materials for sustainable printed circuit boards. Nature Reviews Materials.
7(10), 749-750.
-
He, H., Tian, S., Glaubensklee, C., Tarroja, B., Samuelsen, S., Ogunseitan, O. A., & Schoenung, J. M.
(2022).
Advancing chemical hazard assessment with decision analysis: A case study on lithium-ion and redox flow batteries used for energy storage. JOURNAL OF HAZARDOUS MATERIALS.
437, 129301.
-
Huyan, H., Xu, M., Ji, D., Du, C., Wang, X., Schoenung, J., Wu, R., & Pan, X.
(2022).
Atomic Imaging of Superelasticity of 2-dimensional Freestanding Perovskite Ferroelectric Films. Microscopy and Microanalysis.
28(S1), 1940-1942.
-
Svetlizky, D., Zheng, B., Vyatskikh, A., Das, M., Bose, S., Bandyopadhyay, A., ... Eliaz, N.
(2022).
Laser-based directed energy deposition (DED-LB) of advanced materials. Materials Science & Engineering: A.
840, 142967-142967.
-
Wang, X., Hu, Y., Yu, K., Mahajan, S., Beyerlein, I. J., Lavernia, E. J., Rupert, T. J., & Schoenung, J. M.
(2022).
Room Temperature Deformation-induced Solute Segregation and its Impact on Twin Boundary Mobility in a Mg-Y Alloy. Scripta Materialia.
209, 114375-114375.
-
Svetlizky, D., Zheng, B., Steinberg, D. M., Schoenung, J. M., Lavernia, E. J., & Eliaz, N.
(2022).
The influence of laser directed energy deposition (DED) processing parameters for Al5083 studied by central composite design. 17, 3157-3171.
-
Guo, H., Wang, X., Dupuy, A. D., Schoenung, J. M., & Bowman, W. J.
(2022).
Correction to: Growth of nanoporous high-entropy oxide thin films by pulsed laser deposition. Journal of Materials Research.
37(4), 1018-1018.
-
Guo, H., Wang, X., Dupuy, A. D., Schoenung, J. M., & Bowman, W. J.
(2022).
Growth of nanoporous high-entropy oxide thin films by pulsed laser deposition. Journal of Materials Research.
37(1), 124-135.
-
Jiang, L., Gong, M., Wang, J., Pan, Z., Wang, X., Zhang, D., ... Schoenung, J. M.
(2022).
Visualization and validation of twin nucleation and early-stage growth in magnesium. Nature Communications.
13(1), 20.
-
Jiang, S., Zheng, B., & Schoenung, J. M.
(2022).
Directed energy deposition of metal matrix composites: Computational and experimental comparison of powder particle flow behavior. Journal of Materials Research and Technology.
16, 516-529.
-
Acord, K. A., Dupuy, A. D., Wang, X., Vyatskikh, A. L., Donaldson, O. K., Rupert, T. J., ... Schoenung, J. M.
(2021).
Microstructure, mechanical properties, and ionic conductivity of a solid-state electrolyte prepared using binderless laser powder bed fusion. Journal of Materials Research.
36(22), 4565-4577.
-
Zhang, C., Wang, X., Xu, M., MacDonald, B. E., Hong, R., Zhu, C., ... Lavernia, E. J.
(2021).
Orientation-dependent superelasticity of a metastable high-entropy alloy. Applied Physics Letters.
119(16), 161908.
-
Svetlizky, D., Das, M., Zheng, B., Vyatskikh, A. L., Bose, S., Bandyopadhyay, A., ... Eliaz, N.
(2021).
Directed energy deposition (DED) additive manufacturing: Physical characteristics, defects, challenges and applications. Materials Today.
49, 271-295.
-
Tian, S., He, H., Kendall, A., Davis, S. J., Ogunseitan, O. A., Schoenung, J. M., Samuelsen, S., & Tarroja, B.
(2021).
Environmental benefit-detriment thresholds for flow battery energy storage systems: A case study in California. APPLIED ENERGY.
300, 117354-117354.
-
Dupuy, A. D., Chiu, I., Shafer, P., Arenholz, E., Takamura, Y., & Schoenung, J. M.
(2021).
Hidden transformations in entropy-stabilized oxides. Journal of the European Ceramic Society.
41(13), 6660-6669.
-
Wang, X., Zheng, B., Yu, K., Jiang, S., Lavernia, E. J., & Schoenung, J. M.
(2021).
The role of cell boundary orientation on mechanical behavior: A site-specific micro-pillar characterization study. 46, 102154-102154.
-
Vyatskikh, A. L., Slagle, T. B., Jiang, S., El-Azab, S. A., Bertoli, U. S., Valdevit, L., Lavernia, E. J., & Schoenung, J. M.
(2021).
Thickness-Dependent Microstructure in Additively Manufactured Stainless Steel. Journal of Materials Engineering and Performance.
30(9), 6606-6617.
-
Vyatskikh, A. L., MacDonald, B. E., Dupuy, A. D., Lavernia, E. J., Schoenung, J. M., & Hahn, H.
(2021).
High entropy silicides: CALPHAD-guided prediction and thin film fabrication. Scripta Materialia.
201, 113914-113914.
-
Dupuy, A. D., Chellali, M. R., Hahn, H., & Schoenung, J. M.
(2021).
Multiscale phase homogeneity in bulk nanocrystalline high entropy oxides. Journal of the European Ceramic Society.
41(9), 4850-4858.
-
Vahidi, H., Dupuy, A., Cortez, J., Schoenung, J., & Bowman, W.
(2021).
Nano-scale imaging and spectroscopy of interfaces in (Co,Cu,Mg,Ni,Zn)O high entropy oxides. Microscopy and Microanalysis.
27(S1), 2872-2874.
-
Wang, X., Zheng, B., Yu, K., Jiang, S., Zhou, Y., Lavernia, E., & Schoenung, J.
(2021).
Understanding the effect of cellular structures on mechanical behavior of additively manufactured 316L stainless steel. Microscopy and Microanalysis.
27(S1), 2678-2680.
-
Wang, J., Wang, X., Yu, K., Rupert, T. J., Mahajan, S., Lavernia, E. J., Schoenung, J. M., & Beyerlein, I. J.
(2021).
Manipulating deformation mechanisms with Y alloying of Mg. Materials Science & Engineering: A.
817, 141373-141373.
-
Contreras, A., Vogt, R. G., Oliveira, D. M., Schoenung, J. M., & Gibeling, J. C.
(2021).
Low Cycle Fatigue of an Ultrafine Grained AA5083 Aluminum Alloy Composite Produced by Cryomilling. Metallurgical and Materials Transactions A.
52(3), 975-984.
-
Yaddanapudi, K., Leu, B., Kumar, M. A., Wang, X., Schoenung, J. M., Lavernia, E. J., ... Mahajan, S.
(2021).
Accommodation and formation of { 1 012 } twins in Mg-Y alloys. 204, 116514-116514.
-
Acord, K. A., Dupuy, A. D., Bertoli, U. S., Zheng, B., West, W. C., Chen, Q. N., Shapiro, A. A., & Schoenung, J. M.
(2021).
Morphology, microstructure, and phase states in selective laser sintered lithium ion battery cathodes. Journal of Materials Processing Technology.
288, 116827-116827.
-
Smith, T. R., Sugar, J. D., San Marchi, C., & Schoenung, J. M.
(2021).
Microstructural development in DED stainless steels: applying welding models to elucidate the impact of processing and alloy composition. Journal of Materials Science.
56(1), 762-780.
-
Hu, Y., Turlo, V., Beyerlein, I. J., Mahajan, S., Lavernia, E. J., Schoenung, J. M., & Rupert, T. J.
(2020).
Embracing the Chaos: Alloying Adds Stochasticity to Twin Embryo Growth. 125(20), 205503.
-
Kiani, P., Bertoli, U. S., Dupuy, A. D., Ma, K., & Schoenung, J. M.
(2020).
A Statistical Analysis of Powder Flowability in Metal Additive Manufacturing. Advanced Engineering Materials.
22(10),
-
He, H., Tian, S., Tarroja, B., Ogunseitan, O. A., Samuelsen, S., & Schoenung, J. M.
(2020).
Flow battery production: Materials selection and environmental impact. Journal of Cleaner Production.
269, 121740-121740.
-
Kiani, P., Dupuy, A. D., Ma, K., & Schoenung, J. M.
(2020).
Directed energy deposition of AlSi10Mg: Single track nonscalability and bulk properties. Materials and Design.
194, 108847-108847.
-
Hu, Y., Turlo, V., Beyerlein, I. J., Mahajan, S., Lavernia, E. J., Schoenung, J. M., & Rupert, T. J.
(2020).
Disconnection-mediated twin embryo growth in Mg. ACTA MATERIALIA.
194, 437-451.
-
Wang, X., Jiang, L., Cooper, C., Yu, K., Zhang, D., Rupert, T. J., ... Schoenung, J. M.
(2020).
Toughening magnesium with gradient twin meshes. ACTA MATERIALIA.
195, 468-481.
-
Svetlizky, D., Zheng, B., Buta, T., Zhou, Y., Golan, O. z., Breiman, U., ... Eliaz, N.
(2020).
Directed energy deposition of Al 5xxx alloy using Laser Engineered Net Shaping (LENS). Materials and Design.
192, 108763-108763.
-
Wang, X., Jiang, L., Zhang, D., Rupert, T. J., Beyerlein, I. J., Mahajan, S., Lavernia, E. J., & Schoenung, J. M.
(2020).
Revealing the deformation mechanisms for room-temperature compressive superplasticity in nanocrystalline magnesium. 11, 100731-100731.
-
Zhang, M., Dupuy, A. D., Li, J., Wang, X., Qu, S., Schoenung, J. M., & Li, X.
(2020).
High temperature compressive properties and microstructure of WC-Ni3Al cermets prepared by spark plasma sintering. Vacuum.
175, 109281-109281.
-
Zhang, M., Dupuy, A. D., Li, J., Wang, X., Qu, S., Schoenung, J. M., & Li, X.
(2020).
Study on high temperature deformation behavior of WC-10wt %Ni3Al cemented carbide. Journal of Alloys and Compounds.
820, 153156-153156.
-
Zhang, M., Wang, X., Dupuy, A. D., Schoenung, J. M., & Li, X.
(2020).
Study on Strain RateDependent Deformation Mechanism of WC10 wt% Ni3Al Cemented Carbide by Micropillar Compression. Advanced Engineering Materials.
22(3),
-
MacDonald, B. E., Fu, Z., Wang, X., Li, Z., Chen, W., Zhou, Y., ... Lavernia, E. J.
(2019).
Influence of phase decomposition on mechanical behavior of an equiatomic CoCuFeMnNi high entropy alloy. ACTA MATERIALIA.
181, 25-35.
-
Ochoa, M., He, H., Schoenung, J. M., Helminen, E., Okrasinski, T., Schaeffer, B., ... Olivetti, E. A.
(2019).
Design parameters and environmental impact of printed wiring board manufacture. Journal of Cleaner Production.
238, 117807-117807.
-
He, H., Malloy, T. F., & Schoenung, J. M.
(2019).
Multicriteria Decision Analysis Characterization of Chemical Hazard Assessment Data Sources. Integrated environmental assessment and management.
15(6), 895-908.
-
Lin, T., Cao, C., Sokoluk, M., Jiang, L., Wang, X., Schoenung, J. M., Lavernia, E. J., & Li, X.
(2019).
Aluminum with dispersed nanoparticles by laser additive manufacturing. 10(1), 4124.
-
Terrassa, K. L., Smith, T. R., Jiang, S., Sugar, J. D., & Schoenung, J. M.
(2019).
Improving build quality in Directed Energy Deposition by cross-hatching. Materials Science & Engineering: A.
765, 138269-138269.
-
Zheng, B., Haley, J. C., Yang, N., Yee, J., Terrassa, K. W., Zhou, Y., Lavernia, E. J., & Schoenung, J. M.
(2019).
On the evolution of microstructure and defect control in 316L SS components fabricated via directed energy deposition. 764, 138243-138243.
-
Smith, T. R., Sugar, J. D., Schoenung, J. M., & San Marchi, C.
(2019).
Relationship between manufacturing defects and fatigue properties of additive manufactured austenitic stainless steel. Materials Science & Engineering: A.
765, 138268-138268.
-
Cao, C., Yao, G., Jiang, L., Sokoluk, M., Wang, X., Ciston, J., ... Li, X.
(2019).
Bulk ultrafine grained/nanocrystalline metals via slow cooling. Science Advances.
5(8), eaaw2398.
-
Haley, J. C., Schoenung, J. M., & Lavernia, E. J.
(2019).
Modelling particle impact on the melt pool and wettability effects in laser directed energy deposition additive manufacturing. Materials Science & Engineering: A.
761, 138052-138052.
-
Fu, Z., MacDonald, B. E., Dupuy, A. D., Wang, X., Monson, T. C., Delaney, R. E., ... Lavernia, E. J.
(2019).
Exceptional combination of soft magnetic and mechanical properties in a heterostructured high-entropy composite. Applied Materials Today.
15, 590-598.
-
Jiang, L., Kumar, M. A., Beyerlein, I. J., Wang, X., Zhang, D., Wu, C., ... Schoenung, J. M.
(2019).
Twin formation from a twin boundary in Mg during in-situ nanomechanical testing. Materials Science & Engineering: A.
759, 142-153.
-
Zhang, D., Jiang, L., Wang, X., Beyerlein, I. J., Minor, A. M., Schoenung, J. M., Mahajan, S., & Lavernia, E. J.
(2019).
In situ transmission electron microscopy investigation on c + a slip in Mg. Journal of Materials Research.
34(9), 1499-1508.
-
Zhang, D., Jiang, L., Wang, X., Beyerlein, I. J., Minor, A. M., Schoenung, J. M., Mahajan, S., & Lavernia, E. J.
(2019).
Revealing deformation mechanisms in MgY alloy by in situ deformation of nano-pillars with mediated lateral stiffness. Journal of Materials Research.
34(9), 1542-1554.
-
He, H., Gutierrez, Y., Young, T. M., & Schoenung, J. M.
(2019).
The role of data source selection in chemical hazard assessment: A case study on organic photovoltaics. JOURNAL OF HAZARDOUS MATERIALS.
365, 227-236.
-
Dupuy, A. D., Wang, X., & Schoenung, J. M.
(2019).
Entropic phase transformation in nanocrystalline high entropy oxides. MATERIALS RESEARCH LETTERS.
7(2), 60-67.
-
Smith, T. R., Sugar, J. D., San Marchi, C., & Schoenung, J. M.
(2019).
Strengthening mechanisms in directed energy deposited austenitic stainless steel. ACTA MATERIALIA.
164, 728-740.
-
Balog, M., Krizik, P., Bajana, O., Hu, T., Yang, H., Schoenung, J. M., & Lavernia, E. J.
(2019).
Influence of grain boundaries with dispersed nanoscale Al2O3 particles on the strength of Al for a wide range of homologous temperatures. Journal of Alloys and Compounds.
772, 472-481.
-
Bertoli, U. S., MacDonald, B. E., & Schoenung, J. M.
(2019).
Stability of cellular microstructure in laser powder bed fusion of 316L stainless steel. 739, 109-117.
-
Fullenwider, B., Kiani, P., Schoenung, J. M., & Ma, K.
(2019).
Two-stage ball milling of recycled machining chips to create an alternative feedstock powder for metal additive manufacturing. Powder Technology.
342, 562-571.
-
Haley, J. C., Zheng, B., Bertoli, U. S., Dupuy, A. D., Schoenung, J. M., & Lavernia, E. J.
(2019).
Working distance passive stability in laser directed energy deposition additive manufacturing. Materials and Design.
161, 86-94.
-
Terrassa, K. L., Haley, J. C., MacDonald, B. E., & Schoenung, J. M.
(2018).
Reuse of powder feedstock for directed energy deposition. Powder Technology.
338, 819-829.
-
Haley, J. C., Schoenung, J. M., & Lavernia, E. J.
(2018).
Observations of particle-melt pool impact events in directed energy deposition. ADDITIVE MANUFACTURING.
22, 368-374.
-
Cohn, R., Fullenwider, B., Ma, K., & Schoenung, J. M.
(2018).
Calorimetric Study with Uncertainty Analysis to Investigate the Precipitation Kinetics in a Nanostructured Al Composite. Advanced Engineering Materials.
20(4),
-
Smith, T. R., Sugar, J. D., Schoenung, J. M., & San Marchi, C.
(2018).
Anomalous Annealing Response of Directed Energy Deposited Type 304L Austenitic Stainless Steel. JOM.
70(3), 358-363.
-
Wang, X., Jiang, L., Zhang, D., Beyerlein, I. J., Mahajan, S., Rupert, T. J., Lavernia, E. J., & Schoenung, J. M.
(2018).
Reversed compressive yield anisotropy in magnesium with microlaminated structure. ACTA MATERIALIA.
146, 12-24.
-
Bertoli, U. S., Guss, G., Wu, S., Matthews, M. J., & Schoenung, J. M.
(2017).
In-situ characterization of laser-powder interaction and cooling rates through high-speed imaging of powder bed fusion additive manufacturing. Materials and Design.
135, 385-396.
-
Nieto, A., Yang, H., Jiang, L., & Schoenung, J. M.
(2017).
Reinforcement size effects on the abrasive wear of boron carbide reinforced aluminum composites. Wear.
390, 228-235.
-
Yang, H., Jiang, L., Balog, M., Krizik, P., & Schoenung, J. M.
(2017).
Reinforcement Size Dependence of Load Bearing Capacity in Ultrafine-Grained Metal Matrix Composites. Metallurgical and Materials Transactions A.
48(9), 4385-4392.
-
Nieto, A., Jiang, L., Kim, J., Kim, D., & Schoenung, J. M.
(2017).
Synthesis and Multi Scale Tribological Behavior of WC-Co/Nanodiamond Nanocomposites. Scientific Reports.
7(1), 7060.
-
Malloy, T. F., Zaunbrecher, V. M., Batteate, C. M., Blake, A., Carroll, W. F., Corbett, C. J., ... Thayer, K. A.
(2017).
Advancing Alternative Analysis: Integration of Decision Science. Environmental Health Perspectives.
125(6), 066001.
-
Nieto, A., Kim, J., Penkov, O. V., Kim, D., & Schoenung, J. M.
(2017).
Elevated temperature wear behavior of thermally sprayed WC-Co/nanodiamond composite coatings. Surface and Coatings Technology.
315, 283-293.
-
Yang, N., Yee, J., Zheng, B., Gaiser, K., Reynolds, T., Clemon, L., ... Lavernia, E. J.
(2017).
Process-Structure-Property Relationships for 316L Stainless Steel Fabricated by Additive Manufacturing and Its Implication for Component Engineering. Journal of Thermal Spray Technology.
26(4), 610-626.
-
Saller, B. D., Sha, G., Yang, L. M., Liu, F., Ringer, S. P., & Schoenung, J. M.
(2017).
Iron in solution with aluminum matrix after non-equilibrium processing: an atom probe tomography study. Philosophical Magazine Letters.
97(3), 118-124.
-
Wehage, K., Chenhansa, P., & Schoenung, J. M.
(2017).
An open framework for automated chemical hazard assessment based on GreenScreen for Safer Chemicals: A proof of concept. Integrated environmental assessment and management.
13(1), 167-176.
-
Ma, K., Smith, T., Lavernia, E. J., & Schoenung, J. M.
(2017).
Environmental Sustainability of Laser Metal Deposition: The Role of Feedstock Powder and Feedstock Utilization Factor. Procedia Manufacturing.
7, 198-204.
-
Huang, L., Jiang, L., Topping, T. D., Dai, C., Wang, X., Carpenter, R., Haines, C., & Schoenung, J. M.
(2017).
In situ oxide dispersion strengthened tungsten alloys with high compressive strength and high strain-to-failure. ACTA MATERIALIA.
122, 19-31.
-
Bertoli, U. S., Wolfer, A. J., Matthews, M. J., Delplanque, J., & Schoenung, J. M.
(2017).
On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting. Materials and Design.
113, 331-340.
-
Zhang, D., Wen, H., Kumar, M. A., Chen, F., Zhang, L., Beyerlein, I. J., ... Lavernia, E. J.
(2016).
Yield symmetry and reduced strength differential in Mg-2.5Y alloy. ACTA MATERIALIA.
120, 75-85.
-
Wu, C., Ma, K., Wu, J., Fang, P., Luo, G., Chen, F., ... Lavernia, E. J.
(2016).
Influence of particle size and spatial distribution of B4C reinforcement on the microstructure and mechanical behavior of precipitation strengthened Al alloy matrix composites. Materials Science & Engineering: A.
675, 421-430.
-
Liu, D., Xiong, Y., Li, P., Lin, Y., Chen, F., Zhang, L., Schoenung, J. M., & Lavernia, E. J.
(2016).
Microstructure and mechanical behavior of NS/UFG aluminum prepared by cryomilling and spark plasma sintering. Journal of Alloys and Compounds.
679, 426-435.
-
Nieto, A., Zhao, J. M., Han, Y., Hwang, K. H., & Schoenung, J. M.
(2016).
Microscale tribological behavior and in vitro biocompatibility of graphene nanoplatelet reinforced alumina. Journal of the Mechanical Behavior of Biomedical Materials.
61, 122-134.
-
Jiang, L., Hu, T., Yang, H., Zhang, D., Topping, T., Lavernia, E. J., & Schoenung, J. M.
(2016).
Deformation of a ceramic/metal interface at the nanoscale. Nanoscale.
8(20), 10541-10547.
-
Hu, T., Ma, K., Topping, T. D., Jiang, L., Zhang, D., Mukherjee, A. K., Schoenung, J. M., & Lavernia, E. J.
(2016).
Disordered dislocation configuration in submicrometer Al crystal subjected to plane strain bending. Scripta Materialia.
113, 35-38.
-
Zhang, J., Ouyang, Q., Guo, Q., Li, Z., Fan, G., Su, Y., ... Zhang, D. i.
(2016).
3D Microstructure-based finite element modeling of deformation and fracture of SiCp/Al composites. COMPOSITES SCIENCE AND TECHNOLOGY.
123, 1-9.
-
Vu, D., Han, Y., Chen, F., Jin, D., Schoenung, J. M., & Lee, D.
(2016).
Graphene Nano-Platelets Reinforced ZrO2 Consolidated by Spark Plasma Sintering. SCIENCE OF ADVANCED MATERIALS.
8(2), 312-317.
-
Ma, K., Tang, X., & Schoenung, J. M.
(2016).
Mechanistic investigation into the role of aluminum diffusion in the oxidation behavior of cryomilled NiCrAlY bond coat. Journal Wuhan University of Technology, Materials Science Edition.
31(1), 35-43.
-
Li, M., Ma, K., Jiang, L., Yang, H., Lavernia, E. J., Zhang, L., & Schoenung, J. M.
(2016).
Synthesis and mechanical behavior of nanostructured Al 5083/n-TiB2 metal matrix composites. Materials Science & Engineering: A.
656, 241-248.
-
Ma, K., Hu, T., Yang, H., Topping, T., Yousefiani, A., Lavernia, E. J., & Schoenung, J. M.
(2016).
Coupling of dislocations and precipitates: Impact on the mechanical behavior of ultrafine grained AlZnMg alloys. ACTA MATERIALIA.
103, 153-164.
-
Behm, N., Yang, H., Shen, J., Ma, K., Kecskes, L. J., Lavernia, E. J., Schoenung, J. M., & Wei, Q.
(2016).
Quasi-static and high-rate mechanical behavior of aluminum-based MMC reinforced with boron carbide of various length scales. Materials Science & Engineering: A.
650, 305-316.
-
Jiang, L., Yang, H., Yee, J. K., Mo, X., Topping, T., Lavernia, E. J., & Schoenung, J. M.
(2016).
Toughening of aluminum matrix nanocomposites via spatial arrays of boron carbide spherical nanoparticles. 103, 128-140.
-
Zhang, D., Jiang, L., Schoenung, J. M., Mahajan, S., & Lavernia, E. J.
(2015).
TEM study on relationship between stacking faults and non-basal dislocations in Mg. Philosophical Magazine.
95(34), 3823-3844.
-
Zhang, Y., Sabbaghianrad, S., Yang, H., Topping, T. D., Langdon, T. G., Lavernia, E. J., Schoenung, J. M., & Nutt, S. R.
(2015).
Two-Step SPD Processing of a Trimodal Al-Based Nano-Composite. Metallurgical and Materials Transactions A.
46(12), 5877-5886.
-
Balog, M., Hu, T., Krizik, P., Riglos, M., Saller, B. D., Yang, H., Schoenung, J. M., & Lavernia, E. J.
(2015).
On the thermal stability of ultrafine-grained Al stabilized by in-situ amorphous Al2O3 network. Materials Science & Engineering: A.
648, 61-71.
-
HashemiSadraei, L., Mousavi, S. E., Lavernia, E. J., & Schoenung, J. M.
(2015).
The Influence of Grain Size Determination Method on Grain Growth Kinetics Analysis. Advanced Engineering Materials.
17(11), 1598-1607.
-
Wen, H., Lin, Y., Seidman, D. N., Schoenung, J. M., van Rooyen, I. J., & Lavernia, E. J.
(2015).
An Efficient and Cost-Effective Method for Preparing Transmission Electron Microscopy Samples from Powders. Microscopy and Microanalysis.
21(5), 1184-1194.
-
Moreno, M. D., Ma, K., Schoenung, J., & Dvila, L. P.
(2015).
An integrated approach for probing the structure and mechanical properties of diatoms: Toward engineered nanotemplates. Acta Biomaterialia.
25, 313-324.
-
Song, J., Guo, Q., Ouyang, Q., Su, Y., Zhang, J., Lavernia, E. J., Schoenung, J. M., & Zhang, D. i.
(2015).
Influence of interfaces on the mechanical behavior of SiC particulate-reinforced AlZnMgCu composites. Materials Science & Engineering: A.
644, 79-84.
-
Zhang, X., Rufner, J. F., LaGrange, T., Castro, R., Schoenung, J. M., Campell, G. H., & van Benthem, K.
(2015).
Determination of Reliable Grain Boundary Orientation using Automated Crystallographic Orientation Mapping in the Transmission Electron Microscope. Microscopy and Microanalysis.
21(S3), 1663-1664.
-
Zhang, X., Hu, T., Rufner, J. F., LaGrange, T., Campbell, G. H., Lavernia, E. J., Schoenung, J. M., & van Benthem, K.
(2015).
Metal/ceramic Interface Structures and Segregation Behavior in Aluminum-based Composites. Microscopy and Microanalysis.
21(S3), 1053-1054.
-
Zhang, X., Hu, T., Rufner, J. F., LaGrange, T. B., Campbell, G. H., Lavernia, E. J., Schoenung, J. M., & van Benthem, K.
(2015).
Metal/ceramic interface structures and segregation behavior in aluminum-based composites. 95, 254-263.
-
Hu, T., Jiang, L., Yang, H., Ma, K., Topping, T. D., Yee, J., ... Lavernia, E. J.
(2015).
Stabilized plasticity in ultrahigh strength, submicron Al crystals. ACTA MATERIALIA.
94, 46-58.
-
Saller, B. D., Hu, T., Ma, K., Kurmanaeva, L., Lavernia, E. J., & Schoenung, J. M.
(2015).
A comparative analysis of solubility, segregation, and phase formation in atomized and cryomilled AlFe alloy powders. Journal of Materials Science.
50(13), 4683-4697.
-
Li, M., Cheng, P., Luo, G., Schoenung, J. M., & Shen, Q.
(2015).
Effects of Sb oxidation state on the densification and electrical properties of antimony-doped tin oxide ceramics. Journal of Materials Science: Materials in Electronics.
26(6), 4015-4020.
-
Chen, F., Jin, D., Tyeb, K., Wang, B., Han, Y., Kim, S., ... Zhang, L.
(2015).
Field assisted sintering of graphene reinforced zirconia ceramics. Ceramics International.
41(4), 6113-6116.
-
Jiang, L., Wen, H., Yang, H., Hu, T., Topping, T., Zhang, D., Lavernia, E. J., & Schoenung, J. M.
(2015).
Influence of length-scales on spatial distribution and interfacial characteristics of B4C in a nanostructured Al matrix. 89, 327-343.
-
Nieto, A., Huang, L., Han, Y., & Schoenung, J. M.
(2015).
Sintering behavior of spark plasma sintered alumina with graphene nanoplatelet reinforcement. Ceramics International.
41(4), 5926-5936.
-
Kurmanaeva, L., Topping, T. D., Wen, H., Sugahara, H., Yang, H., Zhang, D., Schoenung, J. M., & Lavernia, E. J.
(2015).
Strengthening mechanisms and deformation behavior of cryomilled AlCuMgAg alloy. Journal of Alloys and Compounds.
632, 591-603.
-
Yang, H., Lavernia, E. J., & Schoenung, J. M.
(2015).
Novel fabrication of bulk Al with gradient grain size distributions via powder metallurgy. Philosophical Magazine Letters.
95(3), 177-186.
-
Zhang, Y., Topping, T. D., Yang, H., Lavernia, E. J., Schoenung, J. M., & Nutt, S. R.
(2015).
Micro-strain Evolution and Toughening Mechanisms in a Trimodal Al-Based Metal Matrix Composite. Metallurgical and Materials Transactions A.
46(3), 1196-1204.
-
Chen, F., Yang, S., Wu, J., Perez, J., Shen, Q., Schoenung, J. M., Lavernia, E. J., & Zhang, L.
(2015).
Spark Plasma Sintering and Densification Mechanisms of Conductive Ceramics under Coupled Thermal/Electric Fields. Journal of The American Ceramic Society.
98(3), 732-740.
-
Xue, M., Kendall, A., Xu, Z., & Schoenung, J. M.
(2015).
Waste management of printed wiring boards: a life cycle assessment of the metals recycling chain from liberation through refining. Environmental Science and Technology.
49(2), 940-947.
-
Harrell, T. J., Topping, T. D., Wen, H., Hu, T., Schoenung, J. M., & Lavernia, E. J.
(2014).
Microstructure and Strengthening Mechanisms in an Ultrafine Grained Al-Mg-Sc Alloy Produced by Powder Metallurgy. Metallurgical and Materials Transactions A.
45(13), 6329-6343.
-
Liu, D., Wen, H., Zhang, D., Wang, C., Lin, Y., Xiong, Y., ... Lavernia, E. J.
(2014).
Stress-enhanced grain growth in a nanostructured aluminium alloy during spark plasma sintering. Philosophical Magazine Letters.
94(11), 741-748.
-
Ma, K., Smith, T., Hu, T., Topping, T. D., Lavernia, E. J., & Schoenung, J. M.
(2014).
Distinct Hardening Behavior of Ultrafine-Grained Al-Zn-Mg-Cu Alloy. Metallurgical and Materials Transactions A.
45(11), 4762-4765.
-
Yang, H., Topping, T. D., Wehage, K., Jiang, L., Lavernia, E. J., & Schoenung, J. M.
(2014).
Tensile behavior and strengthening mechanisms in a submicron B4C-reinforced Al trimodal composite. Materials Science & Engineering: A.
616, 35-43.
-
Zheng, B., Zhou, Y., Mathaudhu, S. N., Valiev, R. Z., Tsao, C., Schoenung, J. M., & Lavernia, E. J.
(2014).
Multiple and extended shear band formation in MgCuGd metallic glass during high-pressure torsion. 86, 24-27.
-
Yang, P., Jiang, L. R., Wu, J. Y., Chen, F., Galaviz-Prez, J. A., Shen, Q., Schoenung, J. M., & Zhang, L. M.
(2014).
Effect of Oxygen Flow Rate on Electrical and Optical Properties of ATO Thin Films Prepared by RF Magnetron Sputtering. Key Engineering Materials.
616, 178-182.
-
Huang, L., Topping, T. D., Yang, H., Lavernia, E. J., & Schoenung, J. M.
(2014).
Nanoscratch-induced deformation behaviour in B4C particle reinforced ultrafine grained Al alloy composites: a novel diagnostic approach. 94(16), 1754-1763.
-
Chen, F., Wu, J. Y., Shen, Q., Schoenung, J. M., & Zhang, L. M.
(2014).
Preparation of ATO Thin Films from SPS-Derived Large Size ATO Ceramic Targets by PVD Methods. Materials Science Forum.
783-786, 1973-1978.
-
Jiang, L., Ma, K., Yang, H., Li, M., Lavernia, E. J., & Schoenung, J. M.
(2014).
The Microstructural Design of Trimodal Aluminum Composites. JOM.
66(6), 898-908.
-
Hu, T., Ma, K., Topping, T. D., Saller, B., Yousefiani, A., Schoenung, J. M., & Lavernia, E. J.
(2014).
Improving the tensile ductility and uniform elongation of high-strength ultrafine-grained Al alloys by lowering the grain boundary misorientation angle. 78, 25-28.
-
Huang, L., Yao, W., Liu, J., Mukherjee, A. K., & Schoenung, J. M.
(2014).
Spark plasma sintering and mechanical behavior of magnesiayttria (50:50vol.%) nanocomposites. Scripta Materialia.
75, 18-21.
-
Ma, K., Wen, H., Hu, T., Topping, T. D., Isheim, D., Seidman, D. N., Lavernia, E. J., & Schoenung, J. M.
(2014).
Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy. ACTA MATERIALIA.
62, 141-155.
-
Ogunseitan, O. A., Allgood, J. M., Hammel, S. C., & Schoenung, J. M.
(2013).
Translating the materials genome into safer consumer products. Environmental Science and Technology.
47(22), 12625-12627.
-
Eisenberg, D. A., Yu, M., Lam, C. W., Ogunseitan, O. A., & Schoenung, J. M.
(2013).
Comparative alternative materials assessment to screen toxicity hazards in the life cycle of CIGS thin film photovoltaics. JOURNAL OF HAZARDOUS MATERIALS.
260, 534-542.
-
Xu, Q., Yu, M., Kendall, A., He, W., Li, G., & Schoenung, J. M.
(2013).
Environmental and economic evaluation of cathode ray tube (CRT) funnel glass waste management options in the United States. Resources, Conservation and Recycling.
78, 92-104.
-
Wen, H., Ma, K., Isheim, D., Seidman, D. N., Schoenung, J. M., & Lavernia, E. J.
(2013).
Atom-Probe Tomographic Study of Precipitation in an Ultrafine-Grained Al-Zn-Mg-Cu Alloy (Al 7075). Microscopy and Microanalysis.
19(S2), 1024-1025.
-
Yu, M., Muy, S., Quader, F., Bonifacio, A., Varghese, R., Clerigo, E., ... Schoenung, J. M.
(2013).
Combined Hydrogen, Heat and Power (CHHP) pilot plant design. International Journal of Hydrogen Energy.
38(12), 4881-4888.
-
Lam, C. W., Lim, S., Ogunseitan, O. A., Shapiro, A. A., Saphores, J., Brock, A., & Schoenung, J. M.
(2013).
Integrating toxicity reduction strategies for materials and components into product design: a case study on utility meters. Integrated environmental assessment and management.
9(2), 319-328.
-
Lam, C. W., Lim, S., & Schoenung, J. M.
(2013).
Linking Material Flow Analysis with Environmental Impact Potential. Journal of Industrial Ecology.
17(2), 299-309.
-
Hu, T., Ma, K., Topping, T. D., Schoenung, J. M., & Lavernia, E. J.
(2013).
Precipitation phenomena in an ultrafine-grained Al alloy. ACTA MATERIALIA.
61(6), 2163-2178.
-
Liu, D., Xiong, Y., Li, Y., Topping, T. D., Zhou, Y., Haines, C., ... Lavernia, E. J.
(2013).
Spark Plasma Sintering of Nanostructured Aluminum: Influence of Tooling Material on Microstructure. Metallurgical and Materials Transactions A.
44(4), 1908-1916.
-
Chen, F., Li, X., Wu, J., Shen, Q., Schoenung, J. M., & Zhang, L.
(2013).
Effect of post-annealing on the electrical conductivity of spark plasma sintered antimony-doped tin oxide (ATO) ceramics. Scripta Materialia.
68(5), 297-300.
-
Zhang, L., Wu, J., Chen, F., Li, X., Schoenung, J. M., & Shen, Q.
(2013).
Spark plasma sintering of antimony-doped tin oxide (ATO) nanoceramics with high density and enhanced electrical conductivity. Journal of Asian Ceramic Societies.
1(1), 114-119.
-
Lim, S., Kang, D., Ogunseitan, O. A., & Schoenung, J. M.
(2013).
Potential environmental impacts from the metals in incandescent, compact fluorescent lamp (CFL), and light-emitting diode (LED) bulbs. Environmental Science and Technology.
47(2), 1040-1047.
-
Wu, J., Chen, F., Shen, Q., Schoenung, J. M., & Zhang, L.
(2013).
Spark Plasma Sintering and Densification Mechanisms of Antimony-Doped Tin Oxide Nanoceramics. Journal of Nanomaterials.
2013, 1-7.
-
Lin, Y., Yao, B. o., Zhang, Z., Li, Y., Sohn, Y., Schoenung, J. M., & Lavernia, E. J.
(2012).
Strain Energy During Mechanical Milling: Part I. Mathematical Modeling. Metallurgical and Materials Transactions A.
43(11), 4247-4257.
-
Lin, Y., Yao, B. o., Zhang, Z., Li, Y., Sohn, Y., Schoenung, J. M., & Lavernia, E. J.
(2012).
Strain Energy During Mechanical Milling: Part II. Experimental. Metallurgical and Materials Transactions A.
43(11), 4258-4265.
-
Lam, C. W., Aguirre, M. P., Schischke, K., Nissen, N. F., Ogunseitan, O. A., & Schoenung, J. M.
(2012).
International harmonization of models for selecting less toxic chemical alternatives: Effect of regulatory disparities in the United States and Europe. Integrated environmental assessment and management.
8(4), 723-730.
-
Li, Y., Topping, T. D., Zhang, Z., Vogt, R. G., Schoenung, J. M., & Lavernia, E. J.
(2012).
Precipitation in Al 5083/B4C Metal Matrix Composites: A TEM Study. Microscopy and Microanalysis.
18(S2), 1902-1903.
-
Zhang, Z., Li, Y., Vogt, R., Zhou, Y., Schoenung, J. M., & Lavernia, E. J.
(2012).
Critical grain size for nanocrystalline-to-amorphous phase transition in Al solid solution. Philosophical Magazine Letters.
92(5), 235-244.
-
Ogunseitan, O. A., & Schoenung, J. M.
(2012).
Human health and ecotoxicological considerations in materials selection for sustainable product development. MRS bulletin.
37(4), 356-363.
-
Ma, K., Lavernia, E. J., & Schoenung, J. M.
(2012).
Absorption of Nitrogen at Al/Al2O3 Interfaces in Al Nanocomposites: A Computational Analysis. Advanced Engineering Materials.
14(1‐2), 77-84.
-
Hashemi-Sadraei, L., Mousavi, S. E., Vogt, R., Li, Y., Zhang, Z., Lavernia, E. J., & Schoenung, J. M.
(2012).
Influence of Nitrogen Content on Thermal Stability and Grain Growth Kinetics of Cryomilled Al Nanocomposites. 43(2), 747-756.
-
Xiong, Y., Hofmeister, W. H., Smugeresky, J. E., Delplanque, J., & Schoenung, J. M.
(2012).
Investigation of atypical molten pool dynamics in tungsten carbide-cobalt during laser deposition using in-situ thermal imaging. Applied Physics Letters.
100(3), 034101.
-
Huang, L., Yao, W., Mukherjee, A. K., & Schoenung, J. M.
(2012).
Improved Mechanical Behavior and Plastic Deformation Capability of Ultrafine Grain Alumina Ceramics. Journal of The American Ceramic Society.
95(1), 379-385.
-
Xiong, Y., Liu, D., Li, Y., Zheng, B., Haines, C., Paras, J., ... Schoenung, J. M.
(2012).
Spark Plasma Sintering of Cryomilled Nanocrystalline Al Alloy - Part I: Microstructure Evolution. Metallurgical and Materials Transactions A.
43(1), 327-339.
-
Liu, D., Xiong, Y., Topping, T. D., Zhou, Y., Haines, C., Paras, J., ... Lavernia, E. J.
(2012).
Spark Plasma Sintering of Cryomilled Nanocrystalline Al Alloy - Part II: Influence of Processing Conditions on Densification and Properties. Metallurgical and Materials Transactions A.
43(1), 340-350.
-
Lim, S., & Schoenung, J. M.
(2011).
Measurement and analysis of product energy efficiency to assist energy star criteria development: An example for desktop computers. Energy Policy.
39(12), 8003-8010.
-
Li, Y., Zhang, Z., Vogt, R., Schoenung, J. M., & Lavernia, E. J.
(2011).
Boundaries and interfaces in ultrafine grain composites. ACTA MATERIALIA.
59(19), 7206-7218.
-
Zhang, Z., Topping, T., Li, Y., Vogt, R., Zhou, Y., Haines, C., ... Lavernia, E. J.
(2011).
Mechanical behavior of ultrafine-grained Al composites reinforced with B4C nanoparticles. 65(8), 652-655.
-
Lim, S., Lam, C. W., & Schoenung, J. M.
(2011).
Priority screening of toxic chemicals and industry sectors in the U.S. toxics release inventory: a comparison of the life cycle impact-based and risk-based assessment tools developed by U.S. EPA. JOURNAL OF ENVIRONMENTAL MANAGEMENT.
92(9), 2235-2240.
-
Funk, M., Ma, K., Eberl, C., Schoenung, J. M., Gken, M., & Hemker, K. J.
(2011).
High-Temperature Mechanical Behavior of End-of-Life Cryomilled NiCrAlY Bond Coat Materials. Metallurgical and Materials Transactions A.
42(8), 2233.
-
Huang, L., Bonifacio, C., Song, D. a., van Benthem, K., Mukherjee, A. K., & Schoenung, J. M.
(2011).
Investigation into the microstructure evolution caused by nanoscratch-induced room temperature deformation in M-plane sapphire. ACTA MATERIALIA.
59(13), 5181-5193.
-
Ma, K., & Schoenung, J. M.
(2011).
Isothermal oxidation behavior of cryomilled NiCrAlY bond coat: Homogeneity and growth rate of TGO. Surface and Coatings Technology.
205(21-22), 5178-5185.
-
Yao, W., Liu, J., Holland, T. B., Huang, L., Xiong, Y., Schoenung, J. M., & Mukherjee, A. K.
(2011).
Grain size dependence of fracture toughness for fine grained alumina. Scripta Materialia.
65(2), 143-146.
-
Lam, C. W., Lim, S., & Schoenung, J. M.
(2011).
Environmental and risk screening for prioritizing pollution prevention opportunities in the U.S. printed wiring board manufacturing industry. JOURNAL OF HAZARDOUS MATERIALS.
189(1-2), 315-322.
-
Song, J., Ma, K., Li, Y., Zhang, L., & Schoenung, J. M.
(2011).
High temperature microstructure and microhardness evolution in dense NiCrAlY bulk material fabricated by spark plasma sintering. Materials Science & Engineering: A.
528(7-8), 3210-3217.
-
Zhou, X., Nixon, H., Ogunseitan, O. A., Shapiro, A. A., & Schoenung, J. M.
(2011).
Transition to Lead-Free Products in the US Electronics Industry: A Model of Environmental, Technical, and Economic Preferences. Environmental Modeling and Assessment.
16(1), 107-118.
-
Li, Y., Lin, Y. J., Xiong, Y. H., Schoenung, J. M., & Lavernia, E. J.
(2011).
Extended twinning phenomena in Al4%Mg alloys/B4C nanocomposite. Scripta Materialia.
64(2), 133-136.
-
Lim, S., Kang, D., Ogunseitan, O. A., & Schoenung, J. M.
(2011).
Potential environmental impacts of light-emitting diodes (LEDs): metallic resources, toxicity, and hazardous waste classification. Environmental Science and Technology.
45(1), 320-327.
-
Ma, K., & Schoenung, J. M.
(2010).
Thermodynamic investigation into the equilibrium phases in the NiCoCrAl system at elevated temperatures. Surface and Coatings Technology.
205(7), 2273-2280.
-
Song, J., Ma, K., Zhang, L., & Schoenung, J. M.
(2010).
Simultaneous synthesis by spark plasma sintering of a thermal barrier coating system with a NiCrAlY bond coat. Surface and Coatings Technology.
205(5), 1241-1244.
-
Ka, K. a., & Schoenung, J. M.
(2010).
Influence of Cryomilling on Microstructure, Phase Stability and Oxidation Behavior of NiCrAlY Bond Coat in Thermal Barrier Coatings: Experimentation and Mechanistic Investigation. Materials Science Forum.
654-656, 1940-1943.
-
Ma, K., & Schoenung, J. M.
(2010).
Influence of cryomilling on the microstructural features in HVOF-sprayed NiCrAlY bond coats for thermal barrier coatings: Creation of a homogeneous distribution of nanoscale dispersoids. Philosophical Magazine Letters.
90(10), 739-751.
-
Huang, L., Zhang, Z., Zhao, Y., Yao, W., Mukherjee, A. K., & Schoenung, J. M.
(2010).
Scratch-induced deformation in fine- and ultrafine-grained bulk alumina. Scripta Materialia.
63(5), 528-531.
-
Vogt, R., Zhang, Z., Huskins, E., Ahn, B., Nutt, S., Ramesh, K. T., Lavernia, E. J., & Schoenung, J. M.
(2010).
High strain rate deformation and resultant damage mechanisms in ultrafine-grained aluminum matrix composites. Materials Science & Engineering: A.
527(21-22), 5990-5996.
-
Lim, S., & Schoenung, J. M.
(2010).
Toxicity potentials from waste cellular phones, and a waste management policy integrating consumer, corporate, and government responsibilities. Waste Management.
30(8-9), 1653-1660.
-
Lim, S., Lam, C. W., & Schoenung, J. M.
(2010).
Quantity-based and toxicity-based evaluation of the U.S. Toxics Release Inventory. JOURNAL OF HAZARDOUS MATERIALS.
178(1-3), 49-56.
-
Lim, S., & Schoenung, J. M.
(2010).
Human health and ecological toxicity potentials due to heavy metal content in waste electronic devices with flat panel displays. JOURNAL OF HAZARDOUS MATERIALS.
177(1-3), 251-259.
-
Xiong, Y., Kim, M., Seo, O., Schoenung, J. M., & Kang, S.
(2010).
(Ti,W)CNi cermets by laser engineered net shaping. Powder Metallurgy.
53(1), 41-46.
-
Li, Y., Liu, W., Ortalan, V., Li, W. F., Zhang, Z., Vogt, R., ... Schoenung, J. M.
(2010).
HRTEM and EELS study of aluminum nitride in nanostructured Al 5083/B4C processed via cryomilling. ACTA MATERIALIA.
58(5), 1732-1740.
-
Ma, K., Tang, F., & Schoenung, J. M.
(2010).
Investigation into the effects of Fe additions on the equilibrium phase compositions, phase fractions and phase stabilities in the NiCrAl system. ACTA MATERIALIA.
58(5), 1518-1529.
-
Xiong, Y., & Schoenung, J. M.
(2010).
Process Cost Comparison for Conventional and NearNetShape Cermet Fabrication. Advanced Engineering Materials.
12(3), 235-241.
-
Li, Y., Zhao, Y. H., Liu, W., Zhang, Z. H., Vogt, R. G., Lavernia, E. J., & Schoenung, J. M.
(2010).
Deformation twinning in boron carbide particles within nanostructured Al 5083/B4C metal matrix composites. Philosophical Magazine.
90(6), 783-792.
-
Zhang, Z., Dallek, S., Vogt, R., Li, Y., Topping, T. D., Zhou, Y., Schoenung, J. M., & Lavernia, E. J.
(2010).
Degassing Behavior of Nanostructured Al and Its Composites. Metallurgical and Materials Transactions A.
41(2), 532-541.
-
Zhou, X., & Schoenung, J. M.
(2009).
Combining U.S.-based prioritization tools to improve screening level accountability for environmental impact: the case of the chemical manufacturing industry. JOURNAL OF HAZARDOUS MATERIALS.
172(1), 423-431.
-
Li, Y., Zhao, Y. H., Ortalan, V., Liu, W., Zhang, Z. H., Vogt, R. G., ... Schoenung, J. M.
(2009).
Investigation of aluminum-based nanocomposites with ultra-high strength. Materials Science & Engineering: A.
527(1-2), 305-316.
-
Vogt, R., Zhang, Z., Li, Y., Bonds, M., Browning, N. D., Lavernia, E. J., & Schoenung, J. M.
(2009).
The absence of thermal expansion mismatch strengthening in nanostructured metalmatrix composites. Scripta Materialia.
61(11), 1052-1055.
-
Ogunseitan, O. A., Schoenung, J. M., Saphores, J., & Shapiro, A. A.
(2009).
Science and regulation. The electronics revolution: from e-wonderland to e-wasteland. Science.
326(5953), 670-671.
-
Xiong, Y., Hofmeister, W. H., Cheng, Z., Smugeresky, J. E., Lavernia, E. J., & Schoenung, J. M.
(2009).
In situ thermal imaging and three-dimensional finite element modeling of tungsten carbidecobalt during laser deposition. ACTA MATERIALIA.
57(18), 5419-5429.
-
Vogt, R. G., Zhang, Z., Topping, T. D., Lavernia, E. J., & Schoenung, J. M.
(2009).
Cryomilled aluminum alloy and boron carbide nano-composite plate. 209(11), 5046-5053.
-
Xiong, Y., Smugeresky, J. E., & Schoenung, J. M.
(2009).
The influence of working distance on laser deposited WCCo. Journal of Materials Processing Technology.
209(10), 4935-4941.
-
Shimohashi, K., Zhou, X., & Schoenung, J. M.
(2009).
A test-rework process yield performance model for estimation of printed wiring board assembly cost. International Journal of Production Economics.
119(1), 161-173.
-
Chen, F., Li, Y., Liu, W., Shen, Q., Zhang, L., Jiang, Q., Lavernia, E. J., & Schoenung, J. M.
(2009).
Synthesis of silicon nitride single-crystalline nanowires by nitriding cryomilled nanocrystalline silicon powder. Scripta Materialia.
60(9), 737-740.
-
Picas, J. A., Xiong, Y., Punset, M., Ajdelsztajn, L., Forn, A., & Schoenung, J. M.
(2009).
Microstructure and wear resistance of WCCo by three consolidation processing techniques. International Journal of Refractory Metals and Hard Materials.
27(2), 344-349.
-
CHEN, F., SHEN, Q., SCHOENUNG, J. M., & ZHANG, L.
(2009).
Preparation of pore gradient silicon nitride ceramics by a high-velocity oxy-fuel spraying technique. Journal of the Ceramic Society of Japan.
117(1364), 445.
-
Chen, F., Shen, Q., Schoenung, J. M., & Zhang, L.
(2008).
Sintering behavior in zirconium phosphate bonded silicon nitride porous ceramics. Materials Science & Engineering: A.
497(1-2), 495-500.
-
Zhang, H., Ye, J., Joshi, S. P., Schoenung, J. M., Chin, E., & Ramesh, K. T.
(2008).
Rate-dependent behavior of hierarchical Al matrix composites. Scripta Materialia.
59(10), 1139-1142.
-
Xiong, Y., Smugeresky, J. E., Ajdelsztajn, L., & Schoenung, J. M.
(2008).
Fabrication of WCCo cermets by laser engineered net shaping. Materials Science & Engineering: A.
493(1-2), 261-266.
-
Tang, F., & Schoenung, J. M.
(2008).
Strain softening in nanocrystalline or ultrafine-grained metals: A mechanistic explanation. Materials Science & Engineering: A.
493(1-2), 101-103.
-
Chen, F., Shen, Q., Schoenung, J. M., & Zhang, L.
(2008).
Synthesis and Pressureless Sintering of Zirconium Phosphate Ceramics. Journal of The American Ceramic Society.
91(10), 3173-3180.
-
Zheng, B., Zhou, Y., Smugeresky, J. E., Schoenung, J. M., & Lavernia, E. J.
(2008).
Thermal Behavior and Microstructural Evolution during Laser Deposition with Laser-Engineered Net Shaping: Part I. Numerical Calculations. Metallurgical and Materials Transactions A.
39(9), 2228-2236.
-
Zheng, B., Zhou, Y., Smugeresky, J. E., Schoenung, J. M., & Lavernia, E. J.
(2008).
Thermal Behavior and Microstructure Evolution during Laser Deposition with Laser-Engineered Net Shaping: Part II. Experimental Investigation and Discussion. Metallurgical and Materials Transactions A.
39(9), 2237-2245.
-
Xiong, Y., Lau, K. i., Zhou, X., & Schoenung, J. M.
(2008).
A streamlined life cycle assessment on the fabrication of WCCo cermets. Journal of Cleaner Production.
16(10), 1118-1126.
-
Tang, F., Wu, X., Ge, S., Ye, J., Zhu, H., Hagiwara, M., & Schoenung, J. M.
(2008).
Dry sliding friction and wear properties of B4C particulate-reinforced Al-5083 matrix composites. Wear.
264(7-8), 555-561.
-
Tang, F., Han, B. Q., Hagiwara, M., & Schoenung, J. M.
(2007).
Tensile Deformation and Fracture in a Bulk Nanostructured Al-5083/SiCp Composite at Elevated Temperatures. Advanced Materials Research.
29-30, 245-248.
-
Tang, F., Liao, C., Ahn, B., Nutt, S. R., & Schoenung, J. M.
(2007).
Thermal stability in nanostructured Al-5083/SiCp composites fabricated by cryomilling. Powder Metallurgy.
50(4), 307-312.
-
Ajdelsztajn, L., Hulbert, D., Mukherjee, A., & Schoenung, J. M.
(2007).
Creep deformation mechanism of cryomilled NiCrAlY bond coat material. Surface and Coatings Technology.
201(24), 9462-9467.
-
Zhang, H., Ye, J., Joshi, S. P., Schoenung, J. M., Chin, E., Gazonas, G. A., & Ramesh, K. T.
(2007).
Superlightweight Nanoengineered Aluminum for Strength under Impact. Advanced Engineering Materials.
9(5), 355-359.
-
Zhou, X., & Schoenung, J. M.
(2007).
An integrated impact assessment and weighting methodology: evaluation of the environmental consequences of computer display technology substitution. JOURNAL OF ENVIRONMENTAL MANAGEMENT.
83(1), 1-24.
-
Tang, F., Han, B. Q., Hagiwara, M., & Schoenung, J. M.
(2007).
Tensile Properties of a Nanostructured Al5083/SiCp Composite at Elevated Temperatures. Advanced Engineering Materials.
9(4), 286-291.
-
Han, B. Q., Ye, J., Tang, F., Schoenung, J., & Lavernia, E. J.
(2007).
Processing and behavior of nanostructured metallic alloys and composites by cryomilling. Journal of Materials Science.
42(5), 1660-1672.
-
Kang, H., Ogunseitan, O., Shapiro, A. A., & Schoenung, J. M.
(2007).
A comparative hierarchical decision framework on toxics use reduction effectiveness for electronic and electrical industries. Environmental Science and Technology.
41(2), 373-379.
-
Ye, J., Han, B. Q., & Schoenung, J. M.
(2006).
Mechanical behaviour of an Almatrix composite reinforced with nanocrystalline Al-coated B4C particulates. Philosophical Magazine Letters.
86(11), 721-732.
-
Ye, J., Lee, Z., Ahn, B., Nutt, S. R., He, J., & Schoenung, J. M.
(2006).
Cryomilling for the fabrication of a particulate B4C reinforced Al nanocomposite: Part II. Mechanisms for microstructural evolution. Metallurgical and Materials Transactions A.
37(10), 3111-3117.
-
Ajdelsztajn, L., Jodoin, B., & Schoenung, J. M.
(2006).
Synthesis and mechanical properties of nanocrystalline Ni coatings produced by cold gas dynamic spraying. Surface and Coatings Technology.
201(3-4), 1166-1172.
-
Zhang, H., Chen, M. W., Ramesh, K. T., Ye, J., Schoenung, J. M., & Chin, E.
(2006).
Tensile behavior and dynamic failure of aluminum 6092/B4C composites. Materials Science & Engineering: A.
433(1-2), 70-82.
-
Kang, H., & Schoenung, J. M.
(2006).
Estimation of future outflows and infrastructure needed to recycle personal computer systems in California. JOURNAL OF HAZARDOUS MATERIALS.
137(2), 1165-1174.
-
Ye, J., Ajdelsztajn, L., & Schoenung, J. M.
(2006).
Bulk nanocrystalline aluminum 5083 alloy fabricated by a novel technique: Cryomilling and spark plasma sintering. Metallurgical and Materials Transactions A.
37(8), 2569-2579.
-
Tang, F., Ajdelsztajn, L., Kim, G. E., Provenzano, V., & Schoenung, J. M.
(2006).
Effects of variations in coating materials and process conditions on the thermal cycle properties of NiCrAlY/YSZ thermal barrier coatings. Materials Science & Engineering: A.
425(1-2), 94-106.
-
Tang, F., & Schoenung, J. M.
(2006).
Evolution of Youngs modulus of air plasma sprayed yttria-stabilized zirconia in thermally cycled thermal barrier coatings. Scripta Materialia.
54(9), 1587-1592.
-
Kang, H., & Schoenung, J. M.
(2006).
Economic analysis of electronic waste recycling: modeling the cost and revenue of a materials recovery facility in California. Environmental Science and Technology.
40(5), 1672-1680.
-
Shapiro, A. A., Bonner, J. K., Ogunseitan, O. A., Saphores, J., & Schoenung, J. M.
(2006).
Implications of Pb-Free Microelectronics Assembly in Aerospace Applications. IEEE Transactions on Components, Packaging and Manufacturing Technology.
29(1), 60-70.
-
Kang, H., & Schoenung, J. M.
(2005).
Electronic waste recycling: A review of U.S. infrastructure and technology options. Resources, Conservation and Recycling.
45(4), 368-400.
-
Ajdelsztajn, L., Jodoin, B., Kim, G. E., & Schoenung, J. M.
(2005).
Cold spray deposition of nanocrystalline aluminum alloys. Metallurgical and Materials Transactions A.
36(11), 3263-3263.
-
Tang, F., Hagiwara, M., & Schoenung, J. M.
(2005).
Microstructure and tensile properties of bulk nanostructured Al-5083/SiCp composites prepared by cryomilling. Materials Science & Engineering: A.
407(1-2), 306-314.
-
Ye, J., Han, B. Q., Lee, Z., Ahn, B., Nutt, S. R., & Schoenung, J. M.
(2005).
A tri-modal aluminum based composite with super-high strength. Scripta Materialia.
53(5), 481-486.
-
Tang, F., Hagiwara, M., & Schoenung, J. M.
(2005).
Formation of coarse-grained inter-particle regions during hot isostatic pressing of nanocrystalline powder. Scripta Materialia.
53(6), 619-624.
-
Tang, F., & Schoenung, J. M.
(2005).
Local accumulation of thermally grown oxide in plasma-sprayed thermal barrier coatings with rough top-coat/bond-coat interfaces. Scripta Materialia.
52(9), 905-909.
-
Ajdelsztajn, L., Schoenung, J. M., Jodoin, B., & Kim, G. E.
(2005).
Cold spray deposition of nanocrystalline aluminum alloys. Metallurgical and Materials Transactions A.
36(3), 657-666.
-
Ajdelsztajn, L., Tang, F., Schoenung, J. M., Kim, G. E., & Provenzano, V.
(2005).
Synthesis and oxidation behavior of nanocrystalline MCrAlY bond coatings. Journal of Thermal Spray Technology.
14(1), 23-30.
-
Ye, J., Han, B. Q., Tang, F., & Schoenung, J. M.
(2005).
Mechanical Behavior of a Tri-modal Al Matrix Composite. MRS Advances.
880, bb1.5.
-
He, J., Ye, J., Lavernia, E. J., Matejczyk, D., Bampton, C., & Schoenung, J. M.
(2004).
Quantitative analysis of grain size in bimodal powders by x-ray diffraction and transmission electron microscopy. Journal of Materials Science.
39(23), 6957-6964.
-
Schoenung, J. M., Ogunseitan, O. A., Saphores, J., & Shapiro, A. A.
(2004).
Adopting LeadFree Electronics: Policy Differences and Knowledge Gaps. Journal of Industrial Ecology.
8(4), 59-85.
-
Picas, J. A., Forn, A., Ajdelsztajn, L., & Schoenung, J.
(2004).
Nanocrystalline NiCrAlY powder synthesis by mechanical cryomilling. Powder Technology.
148(1), 20-23.
-
Ye, J., & Schoenung, J. M.
(2004).
Technical Cost Modeling for the Mechanical Milling at Cryogenic Temperature (Cryomilling). Advanced Engineering Materials.
6(8), 656-664.
-
Tang, F., Ajdelsztajn, L., & Schoenung, J. M.
(2004).
Characterization of oxide scales formed on HVOF NiCrAlY coatings with various oxygen contents introduced during thermal spraying. Scripta Materialia.
51(1), 25-29.
-
Tang, F., Ajdelsztajn, L., Kim, G. E., Provenzano, V., & Schoenung, J. M.
(2004).
Effects of surface oxidation during HVOF processing on the primary stage oxidation of a CoNiCrAlY coating. Surface and Coatings Technology.
185(2-3), 228-233.
-
Picas, J. A., Forn, A., Ajdelsztajn, L., & Schoenung, J.
(2004).
Morfologa de los xidos superficiales en los recubrimientos convencionales y nanocristalinos de NiCrAlY sometidos a alta temperatura. Boletin de la Sociedad Espanola de Ceramica y Vidrio.
43(2), 518-520.
-
Tang, F., Ajdelsztajn, L., & Schoenung, J. M.
(2004).
Influence of Cryomilling on the Morphology and Composition of the Oxide Scales Formed on HVOF CoNiCrAlY Coatings. HIGH TEMPERATURE CORROSION OF MATERIALS.
61(3-4), 219-238.
-
Chung, K. H., He, J., Shin, D. H., & Schoenung, J. M.
(2003).
Mechanisms of microstructure evolution during cryomilling in the presence of hard particles. Materials Science & Engineering: A.
356(1-2), 23-31.
-
He, J., & Schoenung, J. M.
(2003).
Nanocrystalline Ni coatings strengthened with ultrafine particles. Metallurgical and Materials Transactions A.
34(3), 673-683.
-
Ajdelsztajn, L., Picas, J. A., Kim, G. E., Bastian, F. L., Schoenung, J., & Provenzano, V.
(2002).
Oxidation behavior of HVOF sprayed nanocrystalline NiCrAlY powder. Materials Science & Engineering: A.
338(1-2), 33-43.
-
He, J., & Schoenung, J. M.
(2002).
Nanostructured coatings. Materials Science & Engineering: A.
336(1-2), 274-319.
-
He, J., & Schoenung, J. M.
(2002).
A review on nanostructured WCCo coatings. Surface and Coatings Technology.
157(1), 72-79.
-
He, J., Ice, M., Schoenung, J. M., Lavernia, E. J., & Shin, D. H.
(2001).
Thermal stability of nanostructured Cr3C2-NiCr coatings. Journal of Thermal Spray Technology.
10(2), 293-300.
-
Wu, Y., Zeng, X., Lavernia, E. J., & Schoenung, J. M.
(1996).
Reactive atomization of silicon to formin situ oxide sintering aids. Metallurgical and Materials Transactions A.
27(8), 2115-2121.
-
Zeng, X., Lavernia, E. J., & Schoenung, J. M.
(1995).
Solidification of spray atomized silicon droplets. Scripta Metallurgica et Materialia.
32(8), 1203-1208.
-
Wuu, J., & Schoenung, J. M.
(1994).
Synthesis of silicon nitride powder through nitrogen gas atomization. Journal of Materials Science.
29(23), 6259-6267.
-
Jacob, J. E., Schoenung, J. M., Lavernia, E. J., Clark, J. P., & Grant, N. J.
(1987).
Cost Modeling RS Powders Produced by Inert Gas Atomization. JOM.
39(10), 19-21.
-
Schoenung, J. M., & Clark, J. P.
(1987).
Gallium Demand for Electronic Devices. JOM.
39(6), 36-38.
-
Rothman, E. P., Rothman, E. P., Schoenung, J. M., & Clark, J. P.
(1987).
Markets for advanced structural ceramics. Resources Policy.
13(2), 123-141.
-
Schoenung, J. M., & Clark, J. P.
(1986).
Technology assessment of the demand for germanium in world market economies. Technological Forecasting and Social Change.
30(1), 73-89.
-
Schoenung, J. M., & Olivetti, E. A.
Correction: Sustainable development of materials: Broadening stakeholder engagement. MRS bulletin.
1-1.
-
El-Azab, S. A., Norman, J. E., Gomez, L., Dupuy, A. D., & Schoenung, J. M.
Dislocation-mediated room-temperature mechanical behavior of multiphase entropy stabilized oxides. ACTA MATERIALIA.
281, 120428-120428.
-
Norman, J. E., Wang, X., Dupuy, A. D., & Schoenung, J. M.
Micropillar compression of single-crystal single-phase (Co, Cu, Mg, Ni, Zn)O. Applied Physics Letters.
125(3), 031901.
-
Vahidi, H., Dupuy, A. D., Lam, B. X., Cortez, J., Garg, P., Rupert, T. J., Schoenung, J. M., & Bowman, W. J.
Reversible Enhancement of Electronic Conduction Caused by Phase Transformation and Interfacial Segregation in an EntropyStabilized Oxide. Advanced Functional Materials.
-
Hu, T., Jiang, L., Mukherjee, A. K., Schoenung, J. M., & Lavernia, E. J.
Strategies to Approach Stabilized Plasticity in Metals with Diminutive Volume: A Brief Review. Crystals.
6(8), 92-92.
-
Kiani, P., Dupuy, A. D., Ma, K., & Schoenung, J. M.
The Reusability of AlSi10Mg Powder in Directed Energy Deposition. 3(1), 28-43.
-
Jiang, S., Zheng, B., Svetlizky, D., Valdevit, L., Eliaz, N., Lavernia, E. J., & Schoenung, J. M.
Thermal behavior of coated powder during directed energy deposition (DED). Materialia.
38, 102235-102235.
-
Schwartz, E., He, H., Frost, K., Nguyen, B. H., Ogunseitan, O. A., & Schoenung, J. M.
(2024).
Comparative life cycle assessment of copper and gold recovery from waste printed circuit boards: pyrometallurgy, chemical leaching and bioleaching. JOURNAL OF HAZARDOUS MATERIALS.
134545-134545.
-
book
-
Lavernia, E., Shackelford, J., Zheng, B., Ma, K., & Schoenung, J.
(2024).
Metallic Powders for Additive Manufacturing. Wiley.
-
Lavernia, E., Shackelford, J., Zheng, B., Ma, K., & Schoenung, J.
(2024).
Metallic Powders for Additive Manufacturing. Wiley.
-
chapter
-
Flores, R., He, H., Sinha, P., Heath, G., Leu, P. W., & Schoenung, J. M.
(2022).
Environmental Benefits of Closing the Solar Manufacturing and Recycling Loop: Preparation of Solar Manufacturing Inventories. Minerals, Metals and Materials Series.
REWAS 2022: Developing Tomorrows Technical Cycles (Volume I).
(pp. 435-448).
Springer Nature.
-
He, H., Tian, S., Glaubensklee, C., Tarroja, B., Samuelsen, S., Ogunseitan, O. A., & Schoenung, J. M.
(2022).
Potential Health Impact Assessment of Large-Scale Production of Batteries for the Electric Grid. Minerals, Metals and Materials Series.
REWAS 2022: Developing Tomorrows Technical Cycles (Volume I).
(pp. 417-425).
Springer Nature.
-
Wang, X., Kramer, A., Glaubensklee, C., He, H., & Schoenung, J. M.
(2022).
Sustainability-Based Selection of Materials for Refractory High Entropy Alloys. Minerals, Metals and Materials Series.
REWAS 2022: Developing Tomorrows Technical Cycles (Volume I).
(pp. 377-385).
Springer Nature.
-
He, H., Tian, S., Tarroja, B., Schwaebe, B., Samuelsen, S., Ogunseitan, O. A., & Schoenung, J. M.
(2022).
Techno-Economic Analysis of Material Costs for Emerging Flow Batteries. Minerals, Metals and Materials Series.
REWAS 2022: Developing Tomorrows Technical Cycles (Volume I).
(pp. 449-460).
Springer Nature.
-
Dupuy, A. D., Zheng, B., Zhou, Y., Delplanque, J., Monson, T. C., Lavernia, E. J., & Schoenung, J. M.
(2019).
Consolidation and Behavior of FeCoV Soft Magnetic Materials via Spark Plasma Sintering. Spark Plasma Sintering of Materials.
(pp. 473-491).
Springer Nature.
-
Fullenwider, B., Kiani, P., Schoenung, J. M., & Ma, K.
(2019).
From Recycled Machining Waste to Useful Powders for Metal Additive Manufacturing. Minerals, Metals and Materials Series.
REWAS 2019.
(pp. 3-7).
Springer Nature.
-
Lam, C. W., He, H., & Schoenung, J. M.
(2018).
Hazardous Materials Characterization and Assessment. Encyclopedia of Sustainability Science and Technology.
(pp. 1-21).
Springer Nature.
-
Dussing, M., Yang, H., Topping, T. D., Lavernia, E. J., Ma, K., & Schoenung, J. M.
(2018).
Microstructure and Mechanical Behavior of Cryomilled AlMg Composites Reinforced with Nanometric Yttria Partially Stabilized Zirconia. Minerals, Metals and Materials Series.
Metal-Matrix Composites Innovations, Advances and Applications.
(pp. 71-86).
Springer Nature.
-
Zhang, D., Jiang, L., Wang, X., Arul Kumar, M., Beyerlein, I. J., Schoenung, J. M., ... Lavernia, E. J.
(2017).
Multi-scale Investigation on Yield Symmetry and Reduced Strength Differential in an MgY Alloy. Minerals, Metals and Materials Series.
Magnesium Technology 2017.
(pp. 3-3).
Springer Nature.
-
Xu, Q., Yu, M., Kendall, A., He, W., Li, G., & Schoenung, J. M.
(2016).
Environmental and Economic Evaluation of Cathode Ray Tube (CRT)Funnel Glass Waste Management Options in the United States. Rewas 2016: Towards Materials Resource Sustainability.
(pp. 309-310).
Wiley.
-
Xue, M., Kendall, A., Xu, Z., & Schoenung, J. M.
(2016).
Waste Management of Printed Wiring Boards: A Life Cycle Assessment of the Metals Recycling Chain from Liberation Through Refining. Rewas 2016: Towards Materials Resource Sustainability.
(pp. 287-288).
Wiley.
-
Zhang, D., Jiang, L., Zheng, B., Schoenung, J. M., Mahajan, S., Lavernia, E. J., ... Lavernia, E. J.
(2016).
Deformation Twinning (Update). Reference Module in Materials Science and Materials Engineering.
Elsevier.
-
Xu, Q., Yu, M., Kendall, A., He, W., Li, G., & Schoenung, J. M.
(2016).
Environmental and economic evaluation of cathode ray tube (CRT) funnel glass waste management options in the United States. REWAS 2016.
(pp. 309-310).
Springer Nature.
-
Xue, M., Kendall, A., Xu, Z., & Schoenung, J. M.
(2016).
Waste Management of Printed Wiring Boards: A Life Cycle Assessment of the Metals Recycling Chain from Liberation through Refining. REWAS 2016.
(pp. 287-288).
Springer Nature.
-
Schoenung, J. M., & Lam, C. W.
(2012).
Hazardous Materialshazardousmaterial Characterizationhazardousmaterialcharacterization and Assessmenthazardousmaterialassessment. Encyclopedia of Sustainability Science and Technology.
(pp. 4846-4865).
Springer Nature.
-
Han, B. Q., Ye, J., Newbery, A. P., Zhu, Y. T., Schoenung, J. M., & Lavernia, E. J.
(2009).
Bulk Nanostructured Metals from Ball Milling and Consolidation. Bulk Nanostructured Materials.
(pp. 273-291).
Wiley.
-
Schoenung, J. M.
(2008).
Lead Compounds. Ceramic and Glass Materials.
(pp. 151-167).
Springer Nature.
-
Schoenung, J. M.
(2001).
Structural Ceramics. Encyclopedia of Materials: Science and Technology.
(pp. 8921-8926).
Elsevier.
-
Schoenung, J. M., Kraft, E. H., & Ashkin, D.
(1999).
Advanced Silicon Nitride Components: A Cost Analysis. Ceramic Engineering and Science Proceedings.
23nd Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: B: Ceramic Engineering and Science Proceedings, Volume 20 Issue 4.
(pp. 497-504).
Wiley.
-
Schoenung, J. M.
(1999).
Cost Modeling and Analysis for Advanced Structural Silicon Nitride Turbomachinery Ceramics. Ceramic Engineering and Science Proceedings.
23nd Annual Conference on Composites, Advanced Ceramics, Materials, and Structures : A: Ceramic Engineering and Science Proceedings, Volume 20, Issue 3.
(pp. 208-216).
Wiley.
-
Schoenung, J. M.
(1991).
The Economics of Silicon Carbide Whisker Fabrication. Ceramic Engineering and Science Proceedings.
Proceedings of the 15th Annual Conference on Composites and Advanced Ceramic Materials, Part 2 of 2: Ceramic Engineering and Science Proceedings, Volume 12, Issue 9/10.
(pp. 1943-1951).
Wiley.
-
Flores, R., He, H., Sinha, P., Heath, G., Leu, P. W., & Schoenung, J. M.
(2022).
Environmental Benefits of Closing the Solar Manufacturing and Recycling Loop: Preparation of Solar Manufacturing Inventories. Minerals, Metals and Materials Series.
REWAS 2022: Developing Tomorrows Technical Cycles (Volume I).
(pp. 435-448).
Springer Nature.
-
conference paper
-
Smith, T. R., Sugar, J. D., San Marchi, C., & Schoenung, J. M.
(2017).
Orientation Effects on Fatigue Behavior of Additively Manufactured Stainless Steel. v06at06a020-v06at06a020.
-
Zheng, B., Yang, N., Yee, J., Gaiser, K., Lu, W. Y., Clemon, L., ... Schoenung, J. M.
(2016).
Review on laser powder injection additive manufacturing of novel alloys and composites. Proceedings of SPIE.
97380o-97380o-9.
-
Lam, C. W., Lim, S., Ogunseitan, O. A., Shapiro, A. A., Saphores, J., Brock, A., & Schoenung, J. M.
(2011).
Toxicity potential indicator analysis for alternatives recommendations in the RIO Tronics utility meter pulse products. 1-1.
-
Schoenung, J. M., Ogunseitan, O. A., & Eastmond, D. A.
(2009).
Research and Education in Green Materials: A Multi-disciplinary Program to Bridge the Gaps. 1-6.
-
Schoenung, J. M.
(2009).
Teaching Green Topics to Chemical Engineers: Innovation in the Process Design Curriculum. 1-2.
-
Zhou, X., & Schoenung, J. M.
(2008).
An Integrated Impact Assessment and Weighting Methodology: Evaluation of the Environmental Consequences of Lead-Free Solder Alternatives. 1-6.
-
Lam, C. W., Zhou, X., Batarseh, P., Green, T., Wilhelm, K., & Schoenung, J. M.
(2008).
Environmental and Health Assessment for California Printed Circuit Board Manufacturing: Providing Guidance for Pollution Prevention Opportunities. 928-939.
-
Zhou, X., & Schoenung, J. M.
(2006).
Application of Environmental Accounting Information to the Decision-Making for the Environmentally Conscious Design and End-of-Life Management of Cellular Phones. 173-178.
-
Kang, H., & Schoenung, J. M.
(2006).
End-of-Life Personal Computer Systems in California: Analysis of Emissions and Infrastructure Needed to Recycle in the Future. 321-325.
-
Ajdelsztajn, L., Jodoin, B., & Schoenung, J. M.
(2005).
Cold Spray Deposition of Nanocrystalline Materials. 498-498.
-
Ajdelsztajn, L., Tang, F., Kim, G. E., Provenzano, V., & Schoenung, J. M.
(2005).
Improving Thermal Cycling Life of Thermal Barrier Coatings Using Cryomilled Nanostructured NiCrAlY Powder as Feedstock Material. 1430-1430.
-
Ajdelsztajn, L., Sickinger, A., & Schoenung, J. M.
(2005).
Nanostructured NiTi Coatings Produced by Low Pressure Plasma Spraying. 1441-1441.
-
Lincoln, J. D., Ogunseitan, O. A., Saphores, J., Schoenung, J. M., Nixon, H., & Shapiro, A. A.
(2005).
Environmentally Benign Materials for Electronics: A Review of Current Developments and Emerging Technologies. 139-143.
-
Tang, F., Ajdelsztajn, L., & Schoenung, J. M.
(2004).
Effects of Cryomilling on the Oxidation of Thermally Sprayed MCrAlY. 148-153.
-
Mondoux, J., Jodoin, B., Ajdelsztajn, L., Schoenung, J. M., & Kim, G. E.
(2004).
Nanostructured Aluminum Coatings Produced Using Cold Spraying Technology. 347-351.
-
Zhou, X., & Schoenung, J. M.
(2004).
Development of a Hybrid Environmental Impact Assessment Model: a Case Study on Computer Displays. 91-96.
-
Shapiro, A. A., Bonner, J. K., Ogunseitan, O. A., Saphores, J., & Schoenung, J. M.
(2004).
Pb-Free Microelectronics Assembly in Aerospace Applications 110-7803-8155-6/04/$17.00 2004 IEEE, 22IEEEAC paper #1255, Version 1, Updated December 28, 2003. 2474-2485.
-
Kang, H., & Schoenung, J. M.
(2004).
Used Consumer Electronics: A Comparative Analysis of Materials Recycling Technologies. 226-230.
-
Ajdelsztajn, L., Tang, F., Schoenung, J. M., Picas, J., Kim, G. E., & Provenzano, V.
(2003).
Synthesis and Oxidation Behavior of Nanocrystalline MCrAlY Bond Coats. 1517-1524.
-
NEWBERRY, C., AHMADI, A., SCHOENUNG, J., LE BEL, A., MCNALLY, D., & GARNER, V.
(1992).
The development of a mature external Master's degree program in aeronautical engineering - A university/industry partnership
-
Smith, T. R., Sugar, J. D., San Marchi, C., & Schoenung, J. M.
(2017).
Orientation Effects on Fatigue Behavior of Additively Manufactured Stainless Steel. v06at06a020-v06at06a020.
-
institutional repository document
-
Jiang, L., Wang, J., Wang, J., Pan, Z., Wang, X., Zhang, D., ... Schoenung, J.
(2021).
Visualization and Validation of Twin Nucleation and Early-stage Growth in Magnesium
-
Hu, Y., Turlo, V., Beyerlein, I. J., Mahajan, S., Lavernia, E. J., Schoenung, J. M., & Rupert, T. J.
(2020).
Embracing the chaos: Alloying adds stochasticity to twin embryo growth
-
Hu, Y., Turlo, V., Beyerlein, I. J., Mahajan, S., Lavernia, E. J., Schoenung, J. M., & Rupert, T. J.
(2019).
Disconnection-mediated twin embryo growth in Mg
-
Hu, Y., Turlo, V., Beyerlein, I. J., Mahajan, S., Lavernia, E. J., Schoenung, J. M., & Rupert, T.
(2019).
Disconnection-Mediated Twin Embryo Growth in Mg
-
Zhang, M., Dupuy, A. D., Li, J., Wang, X., Qu, S., Schoenung, J. M., & Li, X.
(2019).
High Temperature Deformation Mechanisms in WC-Ni 3Al Cermets
-
Zhang, M., Wang, X., Dupuy, A. D., Schoenung, J. M., & Li, X.
(2019).
Strain-Rate Dependent Deformation Behavior in WC-10 wt%Ni 3Al Cermet Micropillars Under Uniaxial Compression
-
Jiang, L., Wang, J., Wang, J., Pan, Z., Wang, X., Zhang, D., ... Schoenung, J.
(2021).
Visualization and Validation of Twin Nucleation and Early-stage Growth in Magnesium
Teaching
teaching activities
- MEEN689 Sptp: Sustain Matrl Sel & Des Instructor
- MEEN691 Research Instructor
- MSEN491 Hnr-research Instructor
- MSEN689 Sptp: Sust-inf Matl Sel Design Instructor
- MSEN691 Research Instructor
Contact
first name
- Julie
has last name
- Schoenung
Other
- schoenung@tamu.edu