publication venue for
- Experimental Dipole to Test for Current Redistribution in a REBCO Tape-Stack Cable. 34:1-5. 2024
- Dynamics of Current-Sharing Within a REBCO Tape-Stack Cable. 33:1-6. 2023
- Nb3Sn CIC for Outsert Windings of Hybrid Dipoles. 33:1-6. 2023
- Development of Multi-Filament Textured-Powder Bi-2212/Ag Wire With Enhanced Local Area Ratio. 31:1-5. 2021
- Blocks-in-Conduit: REBCO Cable for a 20T@20K Toroid for Compact Fusion Tokamaks. 31:1-5. 2021
- Conformal REBCO Windings for the Dipoles of an Ultimate-Energy Hadron Collider. 31:1-5. 2021
- > 16 T Hybrid Dipole for an LHC Energy Doubler. 30:1-6. 2020
- SuperCIC: Enhanced Winding Current Density for Hybrid Windings of Tokamaks. 30:1-7. 2020
- Cable-in-Conduit Dipoles for the Ion Ring of JLEIC. 29:1-6. 2019
- Superconducting Iron Chalcogenide Thin Films Integrated on Flexible Mica Substrates. 29:1-4. 2019
- Preliminary Design Study of a Fast-Ramping Magnet for Preconcept Design of an Electron-Ion Collider at Jefferson Lab. 30:1-11. 2019
- Block-Coil High-Field Dipoles Using Superconducting Cable-in-Conduit. 28:1-7. 2018
- Stealth Superconducting Magnet Technology for Collider IR and Injector Requirements. 28:1-6. 2018
- Cable-in-Conduit Dipoles to Enable a Future Hadron Collider. 27:1-5. 2017
- Microstructure and Mechanical Properties of Heavily Worked and Recrystallized Copper for Low-Temperature Superconductor Applications. 27:1-5. 2017
- New Magnet Technology for a 1.5 T Open-MRI Breast Imager. 27:1-4. 2017
- First Results of the SRF Wafer Test Cavity for the Characterization of Superconductors. 25:1-4. 2015
- High-Field Open MRI for Breast Cancer Screening. 25:1-5. 2015
- Strong Focusing Cyclotron and Its Applications. 25:1-4. 2015
- Superconducting Sector Dipole for a Strong Focusing Cyclotron. 25:1-4. 2015
- Design of a MgB2 Beam Transport Channel for a Strong-Focusing Cyclotron. 24:1-4. 2014
- Current Status of the Texas A&M Magnet R&D Program. 21:1620-1623. 2011
- Testing of the Superconducting Magnet and Cryogenics for the AMS-02 Experiment. 21:1868-1871. 2011
- Texturing of Micaceous Superconductor Powder and Fabrication of Wire to Preserve the Texture. 21:2783-2786. 2011
- Solid solubility limit of Bi-Pb-Sr-Ca-Mn-O in Bi-Pb-Sr-Ca-Cu-O superconductors. 11:3446-3448. 2001
- Optimized block-coil dipoles for future hadron colliders. 10:334-337. 2000
- Block-coil dipole for future hadron colliders. 9:705-708. 1999
- Stress management of HTS conductor. 9:142-145. 1999
- 16 tesla Nb/sub 3/Sn dipole development at Texas A&M University. 7:555-557. 1997
- SLOTLINE RING-RESONATOR TEST METHOD FOR HIGH-T-C SUPERCONDUCTING FILMS. 4:183-187. 1994
- Integration and Testing of the Superconducting Magnet and Cryogenics for AMS 2010
- Polyhedral Superconducting Cavity for Particle Accelerators 2009
- Superconducting Test Cavity With Dielectric Concentrator for High Q, High Surface Field 2009
- Bi-2212 structured cable for high-field solenoid inserts 2008
-
Improved S-2 Glass Fabric Insulation for
$hbox{Nb}_{3}hbox{Sn}$ - Fine grained tantalum for composite Nb3Sn superconductor diffusion barrier sheet 2007
- Microstructural refinement of niobium for superconducting RF cavities 2007
- Optimizing plasma synthesis for 'dirty' MgB2 2007
- Test results of a Nb3Sn wind/react "Stress-Managed" block dipole 2007
- Virtual Impact Fractionation of Superconductor Precursor Powders in Inert Gas Atmosphere 2007
- Construction of a mirror-configuration stress-managed Nb3Sn block-coil dipole 2006
- Structured-cable superconducting quadrupole for high-heat-load applications 2006
- Extrusion of a hole for tin core insertion in the subelement billet for internal tin superconductor 2005
- Microstructural refinement of tantalum for Nb3Sn superconductor diffusion barriers 2005
- Removal of supermicron particles from precursor powders for PIT fabrication of Nb3Sn and Bi-2212 multifilament conductors 2005
- Severe plastic deformation of bulk Nb for Nb3Sn superconductors 2005
- Construction of block-coil high-field model dipoles for future hadron colliders 2003
- New size sorting technology for superconducting powders 2003
- Novel particulate reinforced tin for tubular Nb3Sn multifilamentary superconductors 2003
- Superconducting sector magnets for a flux-coupled isochronous cyclotron stack 2003
- Superconductivity at 10 K in (Ge,Ba)-based compounds 2003
- 12 Tesla hybrid block-coil dipole for future hadron colliders 2001
- Fabrication and prototype testing of a strain-tolerant Bi-2212 cable 2001
- Strain-tolerant cable using Bi-2212 superconductor 2000
- STUDY OF NB3SN SUPERCONDUCTING JOINTS FOR VERY HIGH MAGNETIC-FIELD NMR SPECTROMETERS 1995
- ULTRA-HIGH-FIELD MAGNETS FOR FUTURE HADRON COLLIDERS 1995
- RRR MEASUREMENTS ON A SMES-ETM MOCKUP SUPERCONDUCTOR 1995