publication venue for
- The Effect of Microstructure Morphology on Indentation Response of Ta/Ti Nanocomposite Thin Films. 51:5677-5690. 2020
- Microstructural Origin of Residual Stress Relief in Aluminum. 50:5038-5055. 2019
- EIS Behavior of Experimental High-Strength Steel in Near-Neutral pH and Load Conditions. 48:1944-1958. 2017
- Measuring Grain Boundary Character Distributions in Ni-Base Alloy 725 Using High-Energy Diffraction Microscopy. 48:354-361. 2017
- Plasticity in Materials with Heterogeneous Microstructures. 47:6608-6620. 2016
- Texture Development in High-Silicon Iron Sheet Produced by Simple Shear Deformation. 47:3095-3108. 2016
- Steel Microstructure Effect on Mechanical Properties and Corrosion Behavior of High Strength Low Carbon Steel. 45:3981-3994. 2014
- Texture Evolution as Determined by In situ Neutron Diffraction During Annealing of Iron Deformed by Equal Channel Angular Pressing. 45:4235-4246. 2014
- Effect of Stress Triaxiality on the Flow and Fracture of Mg Alloy AZ31. 45:3292-3307. 2014
- Thermo-mechanical Response and Damping Behavior of Shape Memory Alloy–MAX Phase Composites. 45:2646-2658. 2014
- Formability of Ultrafine-Grained Interstitial-Free Steels. 44:4194-4206. 2013
- High Strength and Retained Ductility Achieved in a Nitrided Strip Cast Nb-Microalloyed Steel. 44:848-855. 2013
- Impact Toughness of Ultrafine-Grained Interstitial-Free Steel. 43:4320-4330. 2012
- Foreword: Physical and Mechanical Metallurgy of Shape Memory Alloys for Actuator Applications. 43:2869-2869. 2012
- High Strength and High Ductility of Ultrafine-Grained, Interstitial-Free Steel Produced by ECAE and Annealing. 43:1884-1894. 2012
- The Role of Eta Phase Formation on the Creep Strength and Ductility of INCONEL Alloy 740 at 1023 K (750 °C). 43:1902-1910. 2012
- Effect of Nb Microalloying and Hot Rolling on Microstructure and Properties of Ultrathin Cast Strip Steels Produced by the CASTRIP® Process. 42:2199-2206. 2011
- Hydride Formation Process for the Powder Metallurgical Recycle of Zircaloy from Used Nuclear Fuel. 42:192-201. 2011
- Improvement in the Shape Memory Response of Ti50.5Ni24.5Pd25 High-Temperature Shape Memory Alloy with Scandium Microalloying. 41:2485-2497. 2010
- Microstructural Evolution and Mechanical Response of Equal-Channel Angular Extrusion-Processed Al-40Zn-2Cu Alloy. 40:2772-2783. 2009
- Pseudoelasticity and Cyclic Stability in Co49Ni21Ga30 Shape-Memory Alloy Single Crystals at Ambient Temperature. 39:2026-2039. 2008
- Long-term oxidation of an As-Cast Ni3Al alloy at 900 °C and 1100 °C. 37:505-514. 2006
- Severe plastic deformation of nickel-coated aluminum precursor powders at elevated temperatures. 37:449-457. 2006
- Terence E. Mitchell symposium on the magic of materials: Structures and properties Foreword. 35:2201-2201. 2004
- Void nucleation by inclusion cracking. 35:1745-1755. 2004
- The effect of temperature and extrusion speed on the consolidation of zirconium-based metallic glass powder using equal-channel angular extrusion. 35:247-256. 2004
- The effect of severe marforming on shape memory characteristics of a Ti-rich NiTi alloy processed using equal channel angular extrusion. 34:2527-2539. 2003
- The role of nitrogen on the deformation response of hadfield steel single crystals. 34:1821-1831. 2003
- Detwinning in NiTi alloys. 34:5-13. 2003
- Influence of intense plastic straining on grain refinement, precipitation, and mechanical properties of Al-Cu-Li-based alloys. 34 A:1153-1161. 2003
- Artificial neural network and finite element modeling of nanoindentation tests. 33:1939-1947. 2002
- Equal-channel angular extrusion of beryllium. 33:965-972. 2002
- Equal-channel angular extrusion of beryllium. 33:965-972. 2002
- Transformation behavior in a thermomechanically cycled TiNiCu alloy. 32:2689-2693. 2001
- Deformation of NiTiCu shape memory single crystals in compression. 32:477-489. 2001
- The effect of twinning and slip on the bauschinger effect of hadfield steel single crystals. 32:695-706. 2001
- Stress-state effects on the stress-induced martensitic transformation of carburized 4320 steels. 29:427-437. 1998
- Microstructure and properties of copper and aluminum alloy 3003 heavily worked by equal channel angular extrusion. 28:1047-1057. 1997
- Microstructure and phase identification in type 304 stainless steel-zirconium alloys. 27:2151-2159. 1996
- MECHANICS AND MECHANISMS OF MATERIAL DAMPING SYMPOSIUM - FOREWORD. 26:2772-2772. 1995
- Renewal creep theory. 26:829-843. 1995
- Analysis of elastothermodynamic damping in particle-reinforced metal-matrix composites. 26:2773-2783. 1995
- Micromechanical modeling of reinforcement fracture in particle-reinforced metal-matrix composites. 25:2403-2420. 1994
- Formation and stability of metastable structures and amorphous phases in PU-V, PU-TA, and PU-YB systems with positive heats of mixing. 25:1579-1590. 1994
- Coefficients of thermal expansion of metal-matrix composites for electronic packaging. 25:839-850. 1994
- Coefficients of thermal expansion of metal-matrix composites for electronic packaging. 25:839-850. 1994
- Metastable crystalline and amorphous structures formed in the Cu-W system by vapor deposition. 24:1027-1037. 1993
- Excimer laser surface processing of Ti-6Al-4V. 24:215-224. 1993
- An experimental and numerical study of cyclic deformation in metal-matrix composites. 23:919-934. 1992
- On the influence of ply-angle on damping and modulus of elasticity of a metal-matrix composite. 22:641-651. 1991
- Distribution of plastic strain and negative pressure in necked steel and copper bars. 6:815-824. 1975
- Characterization of Strain-Rate Sensitivity and Grain Boundary Structure in Nanocrystalline Gold-Copper Alloys 2010
- Amorphous Zr-Based Foams with Aligned, Elongated Pores 2009
- What Can Plasticity of Amorphous Silicon Tell Us about Plasticity of Metallic Glasses? 2008
- On the Microstructural Stability of Ultrafine-Grained Interstitial-Free Steel under Cyclic Loading 2007
- Long-term oxidation of an as-cast Ni3Al alloy at 900 °C and 1100 °C 2005
- Microstructure evolution and mechanical behavior of bulk copper obtained by consolidation of micro- and nanopowders using equal-channel angular extrusion 2004
- Equal-channel angular extrusion of beryllium 2002