Smart Materials and Structures Journal

Overview
Identity
View All

publication venue for

ASMADA-A tool for automatic analysis of shape memory alloy thermal cycling data under constant stress. 30:125003-125003. 2021
Shape memory alloy torsional actuators: a review of applications, experimental investigations, modeling, and design. 29:113001-113001. 2020
Self-foldable origami reflector antenna enabled by shape memory polymer actuation. 29:115011-115011. 2020
Loading influence on the corrosion assessment during stress-induced martensite reorientation in nickel-titanium SMA. 29:035013-035013. 2020
Shape reconstruction of woven fabrics using fiber bragg grating strain sensors. 28:125018. 2019
Fabrication, characterization and micromechanics modeling of the electrical conductivity of reduced graphene oxide/aramid nanofiber nanocomposites. 28:094001-094001. 2019
Passive piezoelectric subordinate oscillator arrays. 28:085046-085046. 2019
Stable crack growth in NiTi shape memory alloys: 3D finite element modeling and experimental validation. 28:064001-064001. 2019
Topology optimization of flextensional piezoelectric actuators with active control law. 28:035015-035015. 2019
Dynamic and thermal characterization of additively manufactured pressure-fed flexures with internal fluidic channels. 28:105032-105032. 2019
Seismic performance upgrading of substandard RC frames using shape memory alloy bars. 28:085007-085007. 2019
The effects of cold rolling and the subsequent heat treatments on the shape memory and the superelasticity characteristics of Cu73Al16Mn11 shape memory alloy. 27:015028-015028. 2018
Coupled behavior of shape memory alloy-based morphing spacecraft radiators: experimental assessment and analysis. 27:065006-065006. 2018
A liquid metal-based structurally embedded vascular antenna: I. Concept and multiphysical modeling. 26:025001-025001. 2017
A dual resonant rectilinear-to-rotary oscillation converter for low frequency broadband electromagnetic energy harvesting. 26:095059-095059. 2017
Two-year performance study of porous, thermoset, shape memory polyurethanes intended for vascular medical devices.. 26:035054-035054. 2017
A liquid metal-based structurally embedded vascular antenna: II. Multiobjective and parameterized design exploration. 26:025002-025002. 2017
Adaptive and active materials: selected papers from the ASME 2015 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 15) (Colorado Springs, CO, USA, 21-23 September 2015). 25:100201-100201. 2016
A validated model for induction heating of shape memory alloy actuators. 25:045022-045022. 2016
A dynamic spar numerical model for passive shape change. 25:104006-104006. 2016
Solvent stimulated actuation of polyurethane-based shape memory polymer foams using dimethyl sulfoxide and ethanol.. 25:075014-075014. 2016
Work production using the two-way shape memory effect in NiTi and a Ni-rich NiTiHf high-temperature shape memory alloy. 24:125023-125023. 2015
Adaptive and active materials: selected papers from the ASME 2014 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 14) (Newport, RI, USA, 8-10 September 2014). 24:090201-090201. 2015
Characterization and representation of mechanical waves generated in piezo-electric augmented beams. 24:105026-105026. 2015
On the use of tensegrity structures for kinetic solar facades of smart buildings. 24:105032-105032. 2015
Developing an active artificial hair cell using nonlinear feedback control. 24:094004-094004. 2015
Standardization of shape memory alloy test methods toward certification of aerospace applications. 24:082001-082001. 2015
Tunable thiol-epoxy shape memory polymer foams. 24:055001-055001. 2015
Mimicking the cochlear amplifier in a cantilever beam using nonlinear velocity feedback control. 23:075019-075019. 2014
Active materials and structures for origami engineering. 23:090201-090201. 2014
Design optimization of a twist compliant mechanism with nonlinear stiffness. 23:104010-104010. 2014
Electric poling-assisted additive manufacturing process for PVDF polymer-based piezoelectric device applications. 23:095044-095044. 2014
Origami-inspired active structures: a synthesis and review. 23:094001-094001. 2014
Flexible latex-polyaniline segregated network composite coating capable of measuring large strain on epoxy. 22:015008-015008. 2013
Analytical solution for the pseudoelastic response of a shape memory alloy thick-walled cylinder under internal pressure. 22:094007-094007. 2013
Design and numerical analysis of an SMA mesh-based self-folding sheet. 22:094008-094008. 2013
Design and optimization of a bend-and-sweep compliant mechanism. 22:094019-094019. 2013
Low frequency acoustic energy harvesting using PZT piezoelectric plates in a straight tube resonator. 22:055013-055013. 2013
Rubber muscle actuation with pressurized CO2 from enzyme-catalyzed urea hydrolysis. 22:094022-094022. 2013
Stress-induced martensite to austenite phase transformation in Ni2MnGa magnetic shape memory alloys. 21:045011-045011. 2012
Passively morphing ornithopter wings constructed using a novel compliant spine: design and testing. 21:094028-094028. 2012
Thermo-adaptive functionality of graphene/polydimethylsiloxane nanocomposites. 21:105032-105032. 2012
Seismic assessment of bridge structures isolated by a shape memory alloy/rubber-based isolation system. 20:015003-015003. 2011
The effect of moisture absorption on the physical properties of polyurethane shape memory polymer foams.. 20:085010-085010. 2011
Combining thermodynamic principles with Preisach models for superelastic shape memory alloy wires. 20:085032-085032. 2011
Use of a Ni60Ti shape memory alloy for active jet engine chevron application: I. Thermomechanical characterization. 19:015020-015020. 2010
Use of a Ni60Ti shape memory alloy for active jet engine chevron application: II. Experimentally validated numerical analysis. 19:015021-015021. 2010
Functional behavior of isotropic magnetorheological gels. 19:085019-085019. 2010
Analysis of the finite deformation response of shape memory polymers: I. Thermomechanical characterization. 19:075005-075005. 2010
Analysis of the finite deformation response of shape memory polymers: II. 1D calibration and numerical implementation of a finite deformation, thermoelastic model. 19:075006-075006. 2010
Novel bio-inspired smart control for hazard mitigation of civil structures. 19:115009-115009. 2010
Sensor fault isolation and detection of smart structures. 19:105001-105001. 2010
Thermomechanical fatigue of shape memory alloys. 18:085021-085021. 2009
A phenomenological model for superelasticity in NiTi alloys. 18:025005-025005. 2009
Active skin for turbulent drag reduction. 17:035004-035004. 2008
Low-frequency current noise in electrochromic devices. 17:025005-025005. 2008
On the role of the cooling rate and crystallographic orientation on the shape memory properties of CoNiAl single crystals under compression. 16:1006-1015. 2007
Development of a fuel-powered shape memory alloy actuator system: I. Numerical analysis. 16:S81-S94. 2007
Development of a fuel-powered shape memory alloy actuator system: II. Fabrication and testing. 16:S95-S107. 2007
Shape memory alloys - Foreword. 16:null. 2007
Thermomechanical modeling of hysteresis in SMAs using the dissipationless reference response. 16:s28-S38. 2007
Microscale position control of an electroactive polymer using an anti-windup scheme. 15:924-930. 2006
Functional extensions of Dip Pen NanolithographyTM: active probes and microfluidic ink delivery. 15:s124-S130. 2005
Optimal control of thin circular cylindrical laminated composite shells using active constrained layer damping treatment. 13:64-72. 2004
Vibration control of composite shells using embedded actuating layers. 13:1245-1257. 2004
Vibration suppression of laminated shell structures investigated using higher order shear deformation theory. 13:1176-1194. 2004
Special Issue on BioMEMS and Smart Nanostructures - Preface. 11. 2002
Conduction invasion noise in nanoparticle WO3/Au thin-film devices for gas sensing application. 11:640-644. 2002
How much power does neural propagation need?. 11:800-803. 2002
Preface. 11:null. 2002
Control of laminated composite plates using magnetostrictive layers. 10:657-667. 2001
A finite-element formulation for anodic bonding. 9:737-750. 2000
Displacement control of Timoshenko beams via induced strain actuators. 9:981-984. 2000
Special issue on shape memory alloys - Preface. 9:U3-U3. 2000
On vibration suppression of magnetostrictive beams. 9:49-58. 2000
Development of a shape memory alloy actuated biomimetic vehicle. 9:673-683. 2000
In situ displacement measurements and numerical predictions of embedded SMA transformation. 9:701-710. 2000
Thermomechanical characterization of NiTiCu and NiTi SMA actuators: influence of plastic strains. 9:640-652. 2000
Actuation of elastomeric rods with embedded two-way shape memory alloy actuators. 7:771-783. 1998
Electrothermodynamic analysis of an interface. 7:809-821. 1998
A finite-element model for piezoelectric composite laminates. 6:583-591. 1997
Relative performance of clustering-based neural network and statistical pattern recognition models for nondestructive damage detection. 6:415-424. 1997
Modeling of a flexible beam actuated by shape memory alloy wires. 6:265-277. 1997
An efficient computational model for the stress analysis of smart plate structures. 5:353-360. 1996
On the role of thermoelectric heat transfer in the design of SMA actuators: Theoretical modeling and experiment. 4:252-263. 1995
The cylindrical bending of composite plates with piezoelectric and SMA layers. 3:309-317. 1994
Deformations of active flexible rods with embedded line actuators. 2:71-81. 1993
Active flexible rods with embedded SMA fibers. 1:162-167. 1992
Design optimization and uncertainty analysis of SMA morphing structures 2012
Finite element analysis of the plane strain crack-tip mechanical fields in pseudoelastic shape memory alloys 2012
Characterizing and modeling the free recovery and constrained recovery behavior of a polyurethane shape memory polymer. 2011
Advanced methods for the analysis, design, and optimization of SMA-based aerostructures 2011
Transformation characteristics of shape memory alloy composites 2011
Constitutive modeling and structural analysis considering simultaneous phase transformation and plastic yield in shape memory alloys 2009
A stochastic thermodynamic model for the gradual thermal transformation of SMA polycrystals 1997