selected publications academicarticle Shadravan, A., Schubert, J., Amani, M., & Teodoriu, C. (2015). Using Fatigue-Failure Envelope for Cement-Sheath-Integrity Evaluation. SPE Drilling and Completion. 30(01), 68-75. Yuan, Z., Gardoni, P., Schubert, J., & Teodoriu, C. (2013). Cement failure probability analysis in water injection well. JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING. 107, 45-49. Teodoriu, C., Amani, M., Yuan, Z., Schubert, J. J., & Kosinowski, C. (2013). Investigation of the Mechanical Properties of Class G Cement and their Effect on Well Integrity. International Journal of Engineering and Applied Sciences. 3(2), 1-7. Yuan, Z., Teodoriu, C., & Schubert, J. (2013). Low cycle cement fatigue experimental study and the effect on HPHT well integrity. JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING. 105, 84-90. Teodoni, C., Kosinowski, C., Amani, M., Schubert, J. J., & Shadravan, A. (2013). Wellbore integrity and cement failure at HPHT conditions. International Journal of Engineering and Applied Sciences. 2(2), 1-13. Sorgun, M., Aydin, I., Ozbayoglu, E., & Schubert, J. J. (2012). Mathematical Modeling of Turbulent Flows of Newtonian Fluids in a Concentric Annulus with Pipe Rotation. Energy Sources, Part A: Recovery, Utilization and Environmental Effects. 34(5-8), 540-548. Schubert, J. (2012). Technology Focus: Well Control (January 2012). JPT, Journal of Petroleum Technology. 64(01), 84-84. Schubert, J. (2011). Technology Focus: Well Control (January 2011). JPT, Journal of Petroleum Technology. 63(01), 70-70. Schubert, J. (2010). Technology Focus: Well Control (January 2010). JPT, Journal of Petroleum Technology. 62(01), 56-56. Schubert, J. J., Juvkam-Wold, H. C., & Choe, J. (2006). Well-control procedures for dual-gradient drilling as compared to conventional riser drilling. 21(4), 287-295. Choe, J., Schubert, J. J., & Juvkam-Wold, H. C. (2004). Kick detection in subsea mudlift drilling. JPT, Journal of Petroleum Technology. 56(4), Denney, D. (2003). Well-Control Procedures for Dual-Gradient Drilling. JPT, Journal of Petroleum Technology. 55(06), 46-47. Rehm, B., & Schubert, J. (2001). How to control surface and bottomhole pressure during UBD. World Oil. 222(3), 48-55. Smith, K. L., Gault, A. D., Witt, D. E., Botros, F. P., Peterman, C., Tangedahl, M., ... Schubert, J. J. (1999). SubSea MudLift Drilling JIP: achieving dual-gradient technology. Oil and Gas Journal. 97(SUPPL. AUG.), 21-28. book Rehm, B., Schubert, J., Haghshenas, A., Paknejad, A. S., & Hughes, J. (2008). Managed Pressure Drilling. Elsevier. chapter Cohen, J., Stave, R., Schubert, J., & Elieff, B. (2013). Dual-gradient drilling. Managed Pressure Drilling. (pp. 181-226). Rehm, B., Haghshenas, A., Paknejad, A. S., & Schubert, J. (2013). Situational problems in MPD. Managed Pressure Drilling. (pp. 39-80). Haghshenas, A., Paknejad, A. S., Rehm, B., & Schubert, J. (2013). The why and basic principles of managed well-bore pressure. Managed Pressure Drilling. (pp. 1-38). conference paper Noshi, C. I., Eissa, M. R., Abdalla, R. M., & Schubert, J. J. (2019). An intelligent data driven approach for production prediction. Annual Offshore Technology Conference. Noshi, C. I., & Schubert, J. J. (2019). Application of data science and machine learning algorithms for ROP prediction: Turning data into knowledge. Annual Offshore Technology Conference. Noshi, C. I., & Schubert, J. J. (2019). Using supervised machine learning algorithms to predict BHA walk tendencies Noshi, C. I., & Schubert, J. J. (2019). A novel microbially induced self-healing cement/concrete for underwater concrete offshore structures Noshi, C. I., & Schubert, J. J. (2019). Calculating a tortuosity index metric using machine learning techniques Noshi, C. I., Assem, A. I., & Schubert, J. J. (2018). The Role of Big Data Analytics in Exploration and Production: A Review of Benefits and Applications Noshi, C. I., Noynaert, S. F., & Schubert, J. J. (2018). Casing Failure Data Analytics: A Novel Data Mining Approach in Predicting Casing Failures for Improved Drilling Performance and Production Optimization Noshi, C. I., Noynaert, S. F., & Schubert, J. J. (2018). Failure Predictive Analytics Using Data Mining: How to Predict Unforeseen Casing Failures? Noshi, C. I., & Schubert, J. J. (2018). The role of machine learning in drilling operations; a review Noshi, C. I., Noynaert, S. F., & Schubert, J. J. (2018). Casing Failure Using Machine Learning Algorithms: Five Case Studies Noshi, C. I., & Schubert, J. J. (2018). Self-healing biocement and its potential applications in cementing and sand-consolidation jobs: A review targeted at the oil and gas industry Feng, M., Teodoriu, C., & Schubert, J. (2016). The Transient Temperature Prediction in the Deepwater Riserless Well. v008t11a013-v008t11a013. Oyedokun, O., & Schubert, J. (2016). Theoretical development on morphology of wellbore toroidal breakout. 968-984. Oyedokun, O., Samuel, R., & Schubert, J. (2016). Uphole motor technology Pedersen, T., Godhavn, J., & Schubert, J. (2015). Supervisory control for underbalanced drilling operations. IFAC-PapersOnLine. 120-127. Shadravan, A., Schubert, J., Amani, M., & Teodoriu, C. (2014). HPHT Cement Sheath Integrity Evaluation Method for Unconventional Wells. 73-81. Oyedokun, O., & Schubert, J. (2014). Extending the reach of coiled tubing in directional wells with downhole motors. 100-123. Yuan, Z., Schubert, J., Esteban, U. C., Chantose, P., & Teodoriu, C. (2013). Casing failure mechanism and characterization under HPHT conditions in south texas. 2207-2217. Al-Yami, A. S., & Schubert, J. (2012). Aerated underbalanced drilling system development. 789-802. Yuan, Z., Al-Yami, A. S., Schubert, J., & Teodoriu, C. (2012). Cement failure probability under HPHT conditions supported by long term lab studies and field cases. 113-130. Al-Yami, A. S., Yuan, Z., & Schubert, J. (2012). Failure probability with time under different operational conditions for low-density system based on hollow microspheres supported by long term lab studies and field cases. 1173-1190. Yuan, Z., Schubert, J., & Teodoriu, C. (2012). The effect of hole angle and cementing complications on HPHT well integrity. 1526-1535. Al-Yami, A. S., & Schubert, J. (2012). The use of artificial Bayesian intelligence in practical well control. 741-788. Al-Yami, A. S., & Schubert, J. (2012). Development of an advisory system based on Bayesian Network to minimize corrosion problems in underbalanced drilling. 7-25. Al-Yami, A. S., & Schubert, J. (2012). Using bayesian network to model drilling fluids practices in Saudi Arabia. 80-102. Yuan, Z., Schubert, J., Teodoriu, C., & Gardoni, P. (2012). HPHT gas well cementing complications and its effect on casing collapse resistance. 537-556. Al-Yami, A. S., & Schubert, J. (2012). Drilling fluids consultation system: Development and field applications. 47-70. Al-Yami, A. S., & Schubert, J. (2012). Underbalanced drilling expert system development. 71-111. Chantose, P., Gardoni, P., Schubert, J., & Teodoriu, C. (2012). Structural reliability: Assessing the condition and reliability of casing in compacting reservoirs. 433-447. Teodoriu, C., Yuan, Z., Schubert, J., & Amani, M. (2012). Experimental Measurements of mechanical parameters of Class G cement. 786-792. Chantose, P., Gardoni, P., Schubert, J., & Teodoriu, C. (2011). Structural reliability: Assessing the condition and reliability of casing in compacting reservoirs. 1-15. Al-Yami, A. S., Schubert, J., & Beck, G. (2011). Expert system for the optimal design and execution of successful completion practices using artificial Bayesian intelligence. 954-977. Nauduri, S., Medley, G. H., & Schubert, J. J. (2010). MPD candidate identification: To MPD or not to MPD. 198-204. Sorgun, M., Schubert, J. J., Aydin, I., & Ozbayoglu, M. E. (2010). Modeling of Newtonian Fluids in Annular Geometries With Inner Pipe Rotation. ASME -Publications- Fed. 1453-1461. Teodoriu, C., Ugwu, I., & Schubert, J. (2010). Estimation of casing-cement-formation interaction using a new analytical model. 2257-2270. Nauduri, S., Medley, G. H., & Schubert, J. J. (2009). MPD: Beyond narrow pressure windows. 171-177. Burnett, D. B., Yu, O. Y., & Schubert, J. J. (2009). Well design for environmentally friendly drilling systems: Using a graduate student drilling class team challenge to identify options for reducing impacts. 299-311. Elieff, B. A., & Schubert, J. J. (2009). DUAL GRADIENT DRILLING WILL CONTROL SHALLOW HAZARDS IN DEEPWATER ENVIRONMENTS. 509-539. Paknejad, A., Schubert, J., & Amani, M. (2009). Key Parameters in Foam Drilling Operations. 70-86. Paknejad, A. S., Schubert, J. J., & Amani, M. (2009). CASING POINT SELECTION FOR DRILLING OPERATIONS AT SHALLOW DEPTHS. 547-558. Carlsen, L. A., Nygaard, G., Gravdal, J. E., Nikolaou, M., & Schubert, J. (2008). Performing the dynamic shut-in procedure because of a kick incident when using automatic coordinated control of pump rates and ChokeValve opening. 116-128. Choe, J., Schubert, J. J., & Juvkam-Wold, H. C. (2007). Analyses and procedures for kick detection in subsea mudlift drilling. SPE Drilling and Completion. 296-303. Paknejad, A., Schubert, J. J., & Amani, M. (2007). Foam drilling simulator. 17-31. Paknejad, A., Schubert, J., & Amani, M. (2007). Foam Drilling Simulator. 907-921. Teodoriu, C., Kinzel, H., & Schubert, J. J. (2007). Evaluation of real-time torque-turn charts with application to intelligent make-up. 803-811. Amani, M., Rajabi, M. M., & Schubert, J. J. (2006). Current Accumulator Design Methods Are Inadequate for Deepwater Drilling. 1-11. Amani, M., Rajabi, M. M., Juvkam-Wold, H. C., & Schubert, J. J. (2006). Current Accumulator Design Methods are Inadequate for Deepwater Drilling. 1-11. Nesheli, B. A., & Schubert, J. J. (2006). Effect of water depth on bridging tendencies in ultradeepwater blowouts in Gulf of Mexico. 4153-4160. Schubert, J., Choe, J., Dreher, D., & Juvkam-Wold, H. (2006). Analysis of Gas Kicks in Multilateral Wells Utilizing Computer Simulation. 701-705. Amani, M., Rajabi, M. M., Juvkam-Wold, H. C., & Schubert, J. J. (2006). Possible Alternatives for Gas-Charged Accumulators in Deep Waters. 32-48. Shahri, M., Schubert, J. J., & Amani, M. (2005). Detecting and Modeling Cement Failure in High-Pressure/High-Temperature (HP/HT) Wells, Using Finite Element Method (FEM). 1675-1684. Choe, J. G., Schubert, J. J., & Juvkam-Wold, H. C. (2005). Well-control analyses on extended-reach and multilateral trajectories. SPE Drilling and Completion. 101-108. Noynaert, S. F., & Schubert, J. J. (2005). Modeling ultra-deepwater blowouts and dynamic kills and the resulting blowout control best practices recommendations. 989-1002. Gibson, P., Aleksandrov, A., Champion, M., Dodson, G., Schubert, J., & Tang, J. (2005). Resonance Control Cooling System Performance and Developments. 2541-2543. Choe, J., Schubert, J. J., & Juvkam-Wold, H. C. (2004). Analyses and Procedures for Kick Detection in Subsea Mudlift Drilling. 203-211. Jourine, S., Schubert, J. J., & Valk, P. P. (2004). Saturated poroelastic hollow cylinder subjected to non-stationary boundary pressure Model and laboratory test Choe, J., Schubert, J. J., & Juvkam-Wold, H. C. (2004). Well Control Analyses on Extended Reach and Multilateral Trajectories. Annual Offshore Technology Conference. 1334-1346. Alajmi, S. E., & Schubert, J. J. (2003). Optimum Selection of Underbalanced Techniques. 259-272. Schubert, J. J., Juvkam-Wold, H. C., Weddle, C. E., & Alexander, C. H. (2002). HAZOP of Well Control Procedures Provides Assurance of the Safety of the Subsea MudLift Drillina System. 297-304. Schubert, J. J. (2001). SubSea mudLift drilling: From JIP to the classroom. ASEE Annual Conference Proceedings. 9125-9138. Tallerico, P., Crow, M., Guthrie, A., Johnson, G., & Schubert, J. (2001). The conventional facilities requirements for the SNS linac. 3377-3379. Schubert, J. J., & Wright, J. C. (1998). Early kick detection through liquid level monitoring in the wellbore. 889-895. Al-Yami, A., Schubert, J., Medina-Cetina, Z., & Yu, O. Drilling Expert System for the Optimal Design and Execution of Successful Cementing Practices. 322-344. patent Al-yami, A., & Schubert, J. (2016). Expert systems for well completion using bayesian decision networks including a fluids damage and temperature effects uncertainty node, a perforation considerations uncertainty node, a perforation analysis uncertainty node, and a perforation type decision node Al-yami, A., & Schubert, J. (2016). Expert system for well completion using bayesian probabilities and a consequences node dependent on the zonal isolation types, reliability level, cost level, productivity level, the completion type, and the junction classification decision nodes Al-yami, A., & Schubert, J. (2016). Expert systems for well completion using Bayesian probabilities, and a packers consequence node dependent on wellbore fluids, hydrocarbon types, completion fluids, packers decision, and treatment fluids nodes Al-yami, A., & Schubert, J. (2016). Expert systems for well completion using Bayesian probabilities, open hole gravel pack types, gravel pack design details, open hole gravel packs, and completion types Al-yami, A., & Schubert, J. (2016). Expert systems for well completion using bayesian decision networks with a multilateral junction design, and a junction classification decision node Al-yami, A., & Schubert, J. (2015). Systems and methods for an expert system for well control using Bayesian intelligence Al-yami, A., & Schubert, J. (2015). Systems and methods for drilling fluids expert systems using bayesian decision networks Al-yami, A., & Schubert, J. (2015). Systems and methods for expert systems for well completion using Bayesian decision models (BDNs), drilling fluids types, and well types Schubert, J., Alexander, C., Juvkam-wold, H., Weddle III, C., & Choe, J. (2002). Method for detecting a leak in a drill string valve Schubert, J., Alexander, C., Juvkam-wold, H., Weddle III, C., & Choe, J. (2002). Method for controlling a well in a subsea mudlift drilling system Schubert, J., Alexander, C., Juvkam-wold, H., Weddle III, C., & Choe, J. (2002). Methods for the dynamic shut-in of a subsea mudlift drilling system
editor of book Rehm, B., Haghshenas, A., Paknejad, A., Al-Yami, A., Hughes, J., & Schubert, J. (2012). Underbalanced Drilling: Limits and Extremes Schubert, J. J. (Eds.), Elsevier.
teaching activities ITDE691 Research Instructor PETE225 Intro To Drilling Sys Instructor PETE285 Directed Studies Instructor PETE485 Directed Studies Instructor PETE491 Hnr-research Instructor PETE626 Offshore Drilling Instructor PETE635 Underbalanced Drilling Instructor PETE661 Drilling Engineering Instructor PETE684 Professional Internship Instructor PETE685 Directed Studies Instructor PETE691 Research Instructor PETE691 Research: In-ab Instructor PETE692 Professional Study Instructor
chaired theses and dissertations Abuelaish, Ahmed (2012-07). The Evaluation of the Mechanical Strength of Epoxy-Based Resin as a Plugging Material, and the Development of a Novel Plug and Abandon Technique Using Vitrified Solid Epoxy-Based Resin Beads. Alyami, Abdullah (2012-10). Using Bayesian Network to Develop Drilling Expert Systems. Arias, Henry (2013-07). Use of Finite-element Analysis to Improve Well Cementing in HTHP Conditions. Babalola, Shola Daniel (2015-10). Effect of Mud Cake and Temperature on Wellbore Collapse Initiation Pressure Using Different Failure Criteria. Bell, Matthew G. (2014-08). Development of an OCS Cementing Operational Guidelines Database. Bourne, Dwayne (2009-08). Assessment of API Thread Connections Under Tight Gas Well Conditions. Chantose, Prasongsit (2011-12). Structural Reliability: Assessing the Condition and Reliability of Casing in Compacting Reservoirs. Collette, Eric Peter (2013-07). Subsea Kick Detection on Floating Vessels: A Parametric Study. El-Mallawany, Ibrahim Ismail (2011-05). An Experimental Setup to Study the Settling Behavior of Epoxy Based Fluids. Feng, Ming (2011-05). The Temperature Prediction in Deepwater Drilling of Vertical Well. Haghshenas, Arash (2013-04). A Robust Four-Fluid Transient Flow Simulator as an Analysis and Decision Making Tool for Dynamic Kill Operation. Jiang, Shan (2014-12). Research and Application on the Mechanical Characters of Rotary Steering Drilling Tool. Kaldirim, Omer (2015-12). Riser Gas Migration in EC-Drill(TM) Operations. King, Lauren (2009-05). A Study To Determine Necessity of Pilot Holes When Drilling Shallow Gas Zones Using Top Hole Dual Gradient Drilling Technology. Lindanger, Catharina (2014-05). JOIDES Resolution Drill Ship Drill into Indian Ridge MOHO Hole Cleaning Study. Mendonsa, Aaron John (2016-09). Dual-Gradient Drilling: Investigation of Transient Behavior. Nauduri, Anantha S. (2009-05). Managed Pressure Drilling Candidate Selection. Paknejad, Amir S (2009-08). Development of a Well Intervention Toolkit to Analyze Initial Wellbore Conditions and Evaluate Injection Pressures, Flow Path, Well Kill, and Plugging Procedures. Pereira, Fidel Fernandes (2016-08). Dynamic Simulation of Dual Gradient Drilling Operation using the Finite Element Method. Ravi, Ashwin (2012-10). Experimental Assessment of Water Based Drilling Fluids in High Pressure and High Temperature Conditions. Sadeghi, Simin (2013-11). An Evaluation of Completion Parameters and Well Performance in the Montney Formation in British Columbia, Canada. Shadravan, Arash (2013-12). A Method for Cement Integrity Evaluation in Unconventional Wells. Taghizadeh Ansari, Matin (2014-12). Evaluation of Annular Pressure Buildup (APB) during WCD Blowout of Deepwater Hp/Ht Wells. Teixeira Oliveira, Rafael Cesar (2016-08). Long-Range Description of Rheological Properties of a High-Pressure High-Temperature Oil-Based Drilling Fluid. Turkmenoglu, Hasan (2012-10). Determining the Terminal Velocity and the Particle Size of Epoxy Based Fluids in the Wellbore. Valdes Machado, Alejandro (2013-08). Uncertainty Quantification and Calibration in Well Construction Cost Estimates. Yuan, Zhaoguang (2012-11). The Effect of Cement Mechanical Properties and Reservoir Compaction on HPHT Well Integrity. Zigmond, Brandon (2012-10). Experimental Analysis of Water Based Drilling Fluid Aging Processes at High Temperature and High Pressure Conditions.
education and training Ph.D., Texas A&M University - (College Station, Texas, United States) 1999 M.E., Texas A&M University - (College Station, Texas, United States) 1995 B.S., Texas A&M University - (College Station, Texas, United States) 1978
mailing address Texas A&M University Petroleum Engineering 3116 TAMU College Station, TX 77843-3116 USA