selected publications academic article Shadravan, A., Schubert, J., Amani, M., & Teodoriu, C. (2015). Using Fatigue-Failure Envelope for Cement-Sheath-Integrity Evaluation. SPE DRILLING & COMPLETION. 30(01), 68-75. Yuan, Z., Gardoni, P., Schubert, J., & Teodoriu, C. (2013). Cement failure probability analysis in water injection well. JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING. 107, 45-49. Yuan, Z., Teodoriu, C., & Schubert, J. (2013). Low cycle cement fatigue experimental study and the effect on HPHT well integrity. JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING. 105, 84-90. Teodoriu, C., Amani, M., Yuan, Z., Schubert, J. J., & Kosinowski, C. (2013). Investigation of the Mechanical Properties of Class G Cement and their Effect on Well Integrity. International Journal of Engineering and Applied Sciences. 3(2), 1-7. Teodoni, C., Kosinowski, C., Amani, M., Schubert, J. J., & Shadravan, A. (2013). Wellbore integrity and cement failure at HPHT conditions. International Journal of Engineering and Applied Sciences. 2(2), 1-13. Sorgun, M., Aydin, I., Ozbayoglu, E., & Schubert, J. J. (2012). Mathematical Modeling of Turbulent Flows of Newtonian Fluids in a Concentric Annulus with Pipe Rotation. Energy Sources Part A Recovery Utilization and Environmental Effects. 34(6), 540-548. Schubert, J. (2012). Technology Focus: Well Control (January 2012). Journal of Petroleum Technology. 64(01), 84-84. Schubert, J. (2011). Technology Focus: Well Control (January 2011). Journal of Petroleum Technology. 63(01), 70-70. Schubert, J. (2010). Technology Focus: Well Control (January 2010). Journal of Petroleum Technology. 62(01), 56-56. Schubert, J. J., Juvkam-Wold, H. C., & Choe, J. (2006). Well-Control Procedures for Dual Gradient Drilling as Compared to Conventional Riser Drilling. SPE DRILLING & COMPLETION. 21(04), 287-295. Choe, J., Schubert, J. J., & Juvkam-Wold, H. C. (2004). Kick detection in subsea mudlift drilling. Journal of Petroleum Technology. 56(4), Denney, D. (2003). Well-Control Procedures for Dual-Gradient Drilling. Journal of Petroleum Technology. 55(06), 46-47. Rehm, B., & Schubert, J. (2001). How to control surface and bottomhole pressure during UBD. World Oil. 222(3), 48-55. Smith, K. L., Gault, A. D., Witt, D. E., Botros, F. P., Peterman, C., Tangedahl, M., ... Schubert, J. J. (1999). SubSea MudLift Drilling JIP: achieving dual-gradient technology. Oil and Gas Journal. 97(SUPPL. AUG.), 21-28. book Rehm, B., Schubert, J., Haghshenas, A., Paknejad, A. S., & Hughes, J. (2013). Managed Pressure Drilling. Elsevier. chapter Cohen, J., Stave, R., Schubert, J., & Elieff, B. (2013). Dual-gradient drilling. Managed Pressure Drilling. (pp. 181-226). Rehm, B., Haghshenas, A., Paknejad, A. S., & Schubert, J. (2013). Situational problems in MPD. Managed Pressure Drilling. (pp. 39-80). Haghshenas, A., Paknejad, A. S., Rehm, B., & Schubert, J. (2013). The why and basic principles of managed well-bore pressure. Managed Pressure Drilling. (pp. 1-38). conference paper Noshi, C. I., Eissa, M. R., Abdalla, R. M., & Schubert, J. J. (2019). An intelligent data driven approach for production prediction. All Days. Noshi, C. I., & Schubert, J. J. (2019). Application of data science and machine learning algorithms for ROP prediction: Turning data into knowledge. All Days. Noshi, C. I., & Schubert, J. J. (2019). Using supervised machine learning algorithms to predict BHA walk tendencies Noshi, C. I., & Schubert, J. J. (2019). A novel microbially induced self-healing cement/concrete for underwater concrete offshore structures Noshi, C. I., & Schubert, J. J. (2019). Calculating a tortuosity index metric using machine learning techniques Noshi, C. I., Noynaert, S. F., & Schubert, J. J. (2018). Casing Failure Data Analytics: A Novel Data Mining Approach in Predicting Casing Failures for Improved Drilling Performance and Production Optimization Noshi, C. I., Noynaert, S. F., & Schubert, J. J. (2018). Casing Failure Using Machine Learning Algorithms: Five Case Studies Noshi, C. I., Noynaert, S. F., & Schubert, J. J. (2018). Failure Predictive Analytics Using Data Mining: How to Predict Unforeseen Casing Failures? Noshi, C. I., Assem, A. I., & Schubert, J. J. (2018). The Role of Big Data Analytics in Exploration and Production: A Review of Benefits and Applications Noshi, C. I., & Schubert, J. J. (2018). The role of machine learning in drilling operations; a review Noshi, C. I., & Schubert, J. J. (2018). Self-healing biocement and its potential applications in cementing and sand-consolidation jobs: A review targeted at the oil and gas industry Feng, M., Teodoriu, C., & Schubert, J. (2016). The Transient Temperature Prediction in the Deepwater Riserless Well. v008t11a013-v008t11a013. Oyedokun, O., & Schubert, J. (2016). Theoretical development on morphology of wellbore toroidal breakout. 968-984. Oyedokun, O., Samuel, R., & Schubert, J. (2016). Uphole motor technology Pedersen, T., Godhavn, J., & Schubert, J. (2015). Supervisory control for underbalanced drilling operations. IFAC PAPERSONLINE. 120-127. Shadravan, A., Schubert, J., Amani, M., & Teodoriu, C. (2014). HPHT Cement Sheath Integrity Evaluation Method for Unconventional Wells. 73-81. Oyedokun, O., & Schubert, J. (2014). Extending the reach of coiled tubing in directional wells with downhole motors. 100-123. Yuan, Z., Schubert, J., Esteban, U. C., Chantose, P., & Teodoriu, C. (2013). Casing failure mechanism and characterization under HPHT conditions in south texas. 2207-2217. Al-Yami, A. S., & Schubert, J. (2012). Aerated underbalanced drilling system development. 789-802. Yuan, Z., Al-Yami, A. S., Schubert, J., & Teodoriu, C. (2012). Cement failure probability under HPHT conditions supported by long term lab studies and field cases. 113-130. Al-Yami, A. S., Yuan, Z., & Schubert, J. (2012). Failure probability with time under different operational conditions for low-density system based on hollow microspheres supported by long term lab studies and field cases. 1173-1190. Yuan, Z., Schubert, J., & Teodoriu, C. (2012). The effect of hole angle and cementing complications on HPHT well integrity. 1526-1535. Al-Yami, A. S., & Schubert, J. (2012). The use of artificial Bayesian intelligence in practical well control. 741-788. Al-Yami, A. S., & Schubert, J. (2012). Development of an advisory system based on Bayesian Network to minimize corrosion problems in underbalanced drilling. 7-25. Al-Yami, A. S., & Schubert, J. (2012). Using bayesian network to model drilling fluids practices in Saudi Arabia. 80-102. Yuan, Z., Schubert, J., Teodoriu, C., & Gardoni, P. (2012). HPHT gas well cementing complications and its effect on casing collapse resistance. 537-556. Al-Yami, A. S., & Schubert, J. (2012). Drilling fluids consultation system: Development and field applications. 47-70. Al-Yami, A. S., & Schubert, J. (2012). Underbalanced drilling expert system development. 71-111. Chantose, P., Gardoni, P., Schubert, J., & Teodoriu, C. (2012). Structural reliability: Assessing the condition and reliability of casing in compacting reservoirs. 433-447. Teodoriu, C., Yuan, Z., Schubert, J., & Amani, M. (2012). Experimental Measurements of mechanical parameters of Class G cement. 786-792. Chantose, P., Gardoni, P., Schubert, J., & Teodoriu, C. (2011). Structural reliability: Assessing the condition and reliability of casing in compacting reservoirs. 1-15. Al-Yami, A. S., Schubert, J., & Beck, G. (2011). Expert system for the optimal design and execution of successful completion practices using artificial Bayesian intelligence. 954-977. Al-Yami, A. S., Schubert, J., Medina-Cetina, Z., & Yu, O. Y. (2010). Drilling expert system for the optimal design and execution of successful cementing practices. 322-344. Nauduri, S., Medley, G. H., & Schubert, J. J. (2010). MPD candidate identification: To MPD or not to MPD. 198-204. Teodoriu, C., Ugwu, I., & Schubert, J. (2010). Estimation of casing-cement-formation interaction using a new analytical model. 2257-2270. Sorgun, M., Schubert, J. J., Aydin, I., & Ozbayoglu, M. E. (2010). Modeling of Newtonian Fluids in Annular Geometries With Inner Pipe Rotation. ASME -Publications- Fed. 1453-1461. Nauduri, S., Medley, G. H., & Schubert, J. J. (2009). MPD: Beyond narrow pressure windows. 171-177. Burnett, D. B., Yu, O. Y., & Schubert, J. J. (2009). Well design for environmentally friendly drilling systems: Using a graduate student drilling class team challenge to identify options for reducing impacts. 299-311. Paknejad, A., Schubert, J., & Amani, M. (2009). Key Parameters in Foam Drilling Operations. 70-86. Paknejad, A. S., Schubert, J. J., & Amani, M. (2009). Casing Point Selection for Drilling Operations at Shallow Depths. 547-558. Elieff, B. A., & Schubert, J. J. (2009). Dual Gradient Drilling Will Control Shallow Hazards in Deepwater Environments. 509-539. Carlsen, L. A., Nygaard, G., Gravdal, J. E., Nikolaou, M., & Schubert, J. (2008). Performing the dynamic shut-in procedure because of a kick incident when using automatic coordinated control of pump rates and ChokeValve opening. 116-128. Choe, J., Schubert, J. J., & Juvkam-Wold, H. C. (2007). Analyses and Procedures for Kick Detection in Subsea Mudlift Drilling. SPE DRILLING & COMPLETION. 296-303. Paknejad, A., Schubert, J. J., & Amani, M. (2007). Foam drilling simulator. 17-31. Paknejad, A., Schubert, J. J., & Amani, M. (2007). Foam Drilling Simulator. 907-921. Teodoriu, C., Kinzel, H., & Schubert, J. J. (2007). Evaluation of Real-Time Torque-Turn Charts With Application to Intelligent Make-Up. 803-811. Amani, M., Rajabi, M. M., Juvkam-Wold, H. C., & Schubert, J. J. (2006). Current Accumulator Design Methods are Inadequate for Deepwater Drilling. 1-11. Amani, M., Mir-Rajabi, M., Juvkam-Wold, H. C., & Schubert, J. J. (2006). Possible Alternatives for Gas-Charged Accumulators in Deep Water. 32-48. Nesheli, B. A., & Schubert, J. J. (2006). Effect of water depth on bridging tendencies in ultradeepwater blowouts in Gulf of Mexico. 4153-4160. Schubert, J. J., Juvkam-Wold, H. C., Choe, J., & Dreher, D. T. (2006). Analysis of Gas Kicks in Multilateral Wells Utilizing Computer Simulation. 701-705. Amani, M., Rajabi, M. M., & Schubert, J. J. (2006). Current Accumulator Design Methods Are Inadequate for Deepwater Drilling. 1-11. Shahri, M., Schubert, J. J., & Amani, M. (2005). Detecting and Modeling Cement Failure in High-Pressure/High-Temperature (HP/HT) Wells, Using Finite Element Method (FEM). 1675-1684. Choe, J., Schubert, J. J., & Juvkam-Wold, H. C. (2005). Well-Control Analyses on Extended-Reach and Multilateral Trajectories. SPE DRILLING & COMPLETION. 101-108. Noynaert, S. F., & Schubert, J. J. (2005). Modeling Ultra-Deepwater Blowouts and Dynamic Kills and the Resulting Blowout Control Best Practices Recommendations. 989-1002. Gibson, P., Aleksandrov, A., Champion, M., Dodson, G., Schubert, J., & Tang, J. (2005). Resonance Control Cooling System Performance and Developments. 2541-2543. Choe, J., Schubert, J. J., & Juvkam-Wold, H. C. (2004). Well Control Analyses on Extended Reach and Multilateral Trajectories. All Days. 1334-1346. Jonggeun, C., Schubert, J. J., & Juvkam-Wold, H. C. (2004). Analyses and Procedures for Kick Detection in Subsea Mudlift Drilling. 203-211. Jourine, S., Schubert, J. J., & Valk, P. P. (2004). Saturated poroelastic hollow cylinder subjected to non-stationary boundary pressure Model and laboratory test Alajmi, S. E., & Schubert, J. J. (2003). Optimum Selection of Underbalanced Techniques. 259-272. Schubert, J. J., Juvkam-Wold, H. C., Weddle, C. E., & Alexander, C. H. (2002). HAZOP of Well Control Procedures Provides Assurance of the Safety of the Subsea MudLift Drillina System. 297-304. Schubert, J. J. (2001). SubSea mudLift drilling: From JIP to the classroom. 2001 Annual Conference Proceedings. 9125-9138. Tallerico, P., Crow, M., Guthrie, A., Johnson, G., & Schubert, J. (2001). The conventional facilities requirements for the SNS linac. 3377-3379. Schubert, J. J., & Wright, J. C. (1998). Early kick detection through liquid level monitoring in the wellbore. 889-895. patent Al-yami, A., & Schubert, J. (2016). Expert systems for well completion using bayesian decision networks including a fluids damage and temperature effects uncertainty node, a perforation considerations uncertainty node, a perforation analysis uncertainty node, and a perforation type decision node Al-yami, A., & Schubert, J. (2016). Expert system for well completion using bayesian probabilities and a consequences node dependent on the zonal isolation types, reliability level, cost level, productivity level, the completion type, and the junction classification decision nodes Al-yami, A., & Schubert, J. (2016). Expert systems for well completion using Bayesian probabilities, and a packers consequence node dependent on wellbore fluids, hydrocarbon types, completion fluids, packers decision, and treatment fluids nodes Al-yami, A., & Schubert, J. (2016). Expert systems for well completion using Bayesian probabilities, open hole gravel pack types, gravel pack design details, open hole gravel packs, and completion types Al-yami, A., & Schubert, J. (2016). Expert systems for well completion using bayesian decision networks with a multilateral junction design, and a junction classification decision node Al-yami, A., & Schubert, J. (2015). Systems and methods for an expert system for well control using Bayesian intelligence Al-yami, A., & Schubert, J. (2015). Systems and methods for drilling fluids expert systems using bayesian decision networks Al-yami, A., & Schubert, J. (2015). Systems and methods for expert systems for well completion using Bayesian decision models (BDNs), drilling fluids types, and well types Schubert, J., Alexander, C., Juvkam-wold, H., Weddle III, C., & Choe, J. (2002). Method for detecting a leak in a drill string valve Schubert, J., Alexander, C., Juvkam-wold, H., Weddle III, C., & Choe, J. (2002). Method for controlling a well in a subsea mudlift drilling system Schubert, J., Alexander, C., Juvkam-wold, H., Weddle III, C., & Choe, J. (2002). Methods for the dynamic shut-in of a subsea mudlift drilling system
editor of book Rehm, B., Haghshenas, A., Paknejad, A., Al-Yami, A., Hughes, J., & Schubert, J. (2012). Underbalanced Drilling: Limits and Extremes Schubert, J. J. (Eds.), Elsevier.
teaching activities ITDE691 Research Instructor PETE225 Intro To Drilling Sys Instructor PETE285 Directed Studies Instructor PETE485 Directed Studies Instructor PETE491 Hnr-research Instructor PETE625 Well Control Instructor PETE626 Offshore Drilling Instructor PETE635 Underbalanced Drilling Instructor PETE661 Drilling Engineering Instructor PETE684 Professional Internship Instructor PETE685 Directed Studies Instructor PETE691 Research Instructor PETE691 Research: In-ab Instructor PETE692 Professional Study Instructor
chaired theses and dissertations Abuelaish, Ahmed (2012-05). The Evaluation of the Mechanical Strength of Epoxy-Based Resin as a Plugging Material, and the Development of a Novel Plug and Abandon Technique Using Vitrified Solid Epoxy-Based Resin Beads. Alyami, Abdullah (2012-08). Using Bayesian Network to Develop Drilling Expert Systems. Arias, Henry (2013-08). Use of Finite-element Analysis to Improve Well Cementing in HTHP Conditions. Babalola, Shola Daniel (2015-12). Effect of Mud Cake and Temperature on Wellbore Collapse Initiation Pressure Using Different Failure Criteria. Bell, Matthew G. (2014-12). Development of an OCS Cementing Operational Guidelines Database. Bourne, Dwayne (2009-08). Assessment of API Thread Connections Under Tight Gas Well Conditions. Chantose, Prasongsit (2011-12). Structural Reliability: Assessing the Condition and Reliability of Casing in Compacting Reservoirs. Collette, Eric Peter (2013-08). Subsea Kick Detection on Floating Vessels: A Parametric Study. El-Mallawany, Ibrahim Ismail (2011-05). An Experimental Setup to Study the Settling Behavior of Epoxy Based Fluids. Feng, Ming (2011-05). The Temperature Prediction in Deepwater Drilling of Vertical Well. Haghshenas, Arash (2013-05). A Robust Four-Fluid Transient Flow Simulator as an Analysis and Decision Making Tool for Dynamic Kill Operation. Jiang, Shan (2014-12). Research and Application on the Mechanical Characters of Rotary Steering Drilling Tool. Kaldirim, Omer (2015-12). Riser Gas Migration in EC-Drill(TM) Operations. King, Lauren (2009-05). A Study To Determine Necessity of Pilot Holes When Drilling Shallow Gas Zones Using Top Hole Dual Gradient Drilling Technology. Lindanger, Catharina (2014-05). JOIDES Resolution Drill Ship Drill into Indian Ridge MOHO Hole Cleaning Study. Mendonsa, Aaron John (2016-12). Dual-Gradient Drilling: Investigation of Transient Behavior. Nauduri, Anantha S. (2009-05). Managed Pressure Drilling Candidate Selection. Paknejad, Amir S (2009-08). Development of a Well Intervention Toolkit to Analyze Initial Wellbore Conditions and Evaluate Injection Pressures, Flow Path, Well Kill, and Plugging Procedures. Pereira, Fidel Fernandes (2016-08). Dynamic Simulation of Dual Gradient Drilling Operation using the Finite Element Method. Ravi, Ashwin (2011-08). Experimental Assessment of Water Based Drilling Fluids in High Pressure and High Temperature Conditions. Sadeghi, Simin (2013-12). An Evaluation of Completion Parameters and Well Performance in the Montney Formation in British Columbia, Canada. Shadravan, Arash (2013-12). A Method for Cement Integrity Evaluation in Unconventional Wells. Taghizadeh Ansari, Matin (2014-12). Evaluation of Annular Pressure Buildup (APB) during WCD Blowout of Deepwater Hp/Ht Wells. Teixeira Oliveira, Rafael Cesar (2016-08). Long-Range Description of Rheological Properties of a High-Pressure High-Temperature Oil-Based Drilling Fluid. Turkmenoglu, Hasan (2012-08). Determining the Terminal Velocity and the Particle Size of Epoxy Based Fluids in the Wellbore. Valdes Machado, Alejandro (2013-08). Uncertainty Quantification and Calibration in Well Construction Cost Estimates. Yuan, Zhaoguang (2012-12). The Effect of Cement Mechanical Properties and Reservoir Compaction on HPHT Well Integrity. Zigmond, Brandon (2012-08). Experimental Analysis of Water Based Drilling Fluid Aging Processes at High Temperature and High Pressure Conditions.
education and training Ph.D., Texas A&M University - (College Station, Texas, United States) 1999 M.E., Texas A&M University - (College Station, Texas, United States) 1995 B.S., Texas A&M University - (College Station, Texas, United States) 1978
mailing address Texas A&M University Petroleum Engineering 3116 TAMU College Station, TX 77843-3116 USA