JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
Journal
-
- Overview
-
- Identity
-
- View All
-
Overview
publication venue for
-
Computational Fluid Dynamics Based Mixing Prediction for Tilt Pad Journal Bearing TEHD Modeling—Part I: TEHD-CFD Model Validation and Improvements.
143.
2020
-
Computational Fluid Dynamics Based Mixing Prediction for Tilt Pad Journal Bearing TEHD Modeling—Part II: Implementation With Machine Learning.
143.
2020
-
Pad–Pivot Friction Effect on Nonlinear Response of a Rotor Supported by Tilting-Pad Journal Bearings.
141.
2019
-
3D Thermo-Elasto-Hydrodynamic CFD Model of a Tilting Pad Journal Bearing—Part I: Static Response.
141:1-44.
2019
-
3D Thermo-Elasto-Hydrodynamic CFD Model of a Tilting Pad Journal Bearing—Part II: Dynamic Response.
141:1-35.
2019
-
EFFECT OF OIL SUPPLY PRESSURE ON THE FORCE COEFFIFCIENTS OF A SQUEEZE FILM DAMPER SEALED WITH PISTON RINGS.
141:1-15.
2019
-
Anti-galling Effects of a- Zirconium Phosphate Nanoparticles as Grease Additives.
141.
2019
-
Dynamic Force Coefficients of Hydrostatic Gas Films for Recessed Flat Plates: Experimental Identification and Numerical Predictions.
140:061703.
2018
-
IMPROVED ESTIMATION OF BEARING PADS' INLET TEMPERATURE: A MODEL FOR LUBRICANT MIXING AT OIL FEED PORTS AND VALIDATION AGAINST TEST DATA.
141.
2018
-
Step Clearance Seals: An Analysis to Demonstrate Their Unique Performance.
141.
2018
-
Effects of Microstructure of Quasicrystal Alloys on their Mechanical and Tribological Performance.
140.
2018
-
Measurement and Prediction of the Journal Circumferential Temperature Distribution for the Rotordynamic Morton Effect.
140:031702.
2018
-
Bifurcation Analysis of a Rotor Supported by Five-Pad Tilting Pad Journal Bearings Using Numerical Continuation.
140:021701.
2018
-
Numerical Modeling and Analysis of Flexure-Pivot Tilting-Pad Bearing.
139:051704.
2017
-
The Effect of Nanoparticle Functionalization on Lubrication Performance of Nanofluids Dispersing Silica Nanoparticles in an Ionic Liquid.
139:041802.
2017
-
Double Overhung Disk and Parameter Effect on Rotordynamic Synchronous Instability—Morton Effect—Part I: Theory and Modeling Approach.
139:011705.
2017
-
Double Overhung Disk and Parameter Effect on Rotordynamic Synchronous Instability—Morton Effect—Part II: Occurrence and Prevention.
139:011706.
2017
-
Nanoindentation Studies of the Effects of Ion Irradiation on the Near Surface Mechanical Response of Annealed Ti40Cu32Pd14Zr10Sn2Si2 Metallic Glass Ribbons.
138:041403.
2016
-
Rotordynamic Morton Effect Simulation With Transient, Thermal Shaft Bow.
138:031705.
2016
-
Yield Maps for Single and Bilayer Thin Films Under Scratch.
138:031402.
2016
-
Wear Modeling of Nanometer Thick Protective Coatings.
139:021601.
2016
-
Three-Dimensional Dynamic Model of TEHD Tilting-Pad Journal Bearing—Part I: Theoretical Modeling.
137:041703.
2015
-
Three-Dimensional Dynamic Model of TEHD Tilting-Pad Journal Bearing—Part II: Parametric Studies.
137:041704.
2015
-
Wear Mechanisms of Gray Cast Iron in the Presence of Environmentally Friendly Hydrofluoroolefin-Based Refrigerant and the Effect of Tribofilm Formation.
137:041602.
2015
-
Three-Dimensional Thermohydrodynamic Morton Effect Analysis—Part II: Parametric Studies.
136:031707.
2014
-
Three-Dimensional Thermohydrodynamic Morton Effect Simulation—Part I: Theoretical Model.
136:031706.
2014
-
Morton Effect Cyclic Vibration Amplitude Determination for Tilt Pad Bearing Supported Machinery.
135:011701.
2013
-
Catcher Bearing Life Prediction Using a Rainflow Counting Approach.
134:031101.
2012
-
Influence of Shearing Surface Topography on Frictional Properties of ZnS Nanowire-Based Lubrication System across Ductile Surfaces.
134:022001.
2012
-
Erratum: “Application of Elastic-Plastic Static Friction Models to Rough Surfaces With Asymmetric Asperity Distribution” [Journal of Tribology, 2010, 132(3), p. 031602].
132:047001.
2010
-
A Model for Improved Prediction of Force Coefficients in Grooved Squeeze Film Dampers and Oil Seal Rings.
132:032202-12.
2010
-
Application of Elastic-Plastic Static Friction Models to Rough Surfaces With Asymmetric Asperity Distribution.
132:031602-11.
2010
-
Identification of Force Coefficients in a Squeeze Film Damper With a Mechanical Seal: Large Contact Force.
132:032201-7.
2010
-
Assessment of Elliptical Conformal Hertz Analysis Applied to Constant Velocity Joints.
132:024501-3.
2010
-
Experimental and FEA Scratch of Magnetic Storage Thin-Film Disks to Correlate Magnetic Signal Degradation With Permanent Deformation.
132:021902-11.
2010
-
Thermohydrodynamic model predictions and performance measurements of bump-type foil bearing for oil-free turboshaft engines in rotorcraft propulsion systems.
132:1-11.
2010
-
Characterization of a Foil Bearing Structure at Increasing Temperatures: Static Load and Dynamic Force Performance.
131:041703-9.
2009
-
Temperature and Water Vapor Pressure Effects on the Friction Coefficient of Hydrogenated Diamondlike Carbon Films.
131:032102.
2009
-
High Velocity Oblique Impact and Coefficient of Restitution for Head Disk Interface Operational Shock.
131:021903-9.
2009
-
Analytical and Experimental Elastic-Plastic Impact Analysis of a Magnetic Storage Head-Disk Interface.
131:011902-10.
2008
-
Investigation of contact stiffness and contact damping for magnetic storage head-disk interfaces.
130:1-9.
2008
-
Identification of force coefficients in a squeeze film damper with a mechanical end seal - Centered circular orbit tests.
129:660-668.
2007
-
Effects of Applied Potential on Friction of a Piezoelectric Material.
129:836-840.
2007
-
Modeling of the Effect of Preferential Texturing on the Interfacial Forces in Sub-5nm Ultralow Flying Head-Disk Interfaces.
129:553-561.
2007
-
Static Friction Experiments and Verification of an Improved Elastic-Plastic Model Including Roughness Effects.
129:754-760.
2007
-
Influence of Groove Size on the Static and Rotordynamic Characteristics of Short, Laminar-Flow Annular Seals.
129:398-406.
2007
-
Rotordynamics of Small Turbochargers Supported on Floating Ring Bearings—Highlights in Bearing Analysis and Experimental Validation.
129:391-397.
2006
-
Adhesive Effects on Dynamic Friction for Unlubricated Rough Planar Surfaces.
128:841-850.
2006
-
Design Optimization of Ultra-Low Flying Head-Disk Interfaces Using an Improved Elastic-Plastic Rough Surface Model.
128:801-810.
2006
-
Hybrid-flexure pivot-tilting pad gas bearings: Analysis and experimental validation.
128:551-558.
2006
-
Limits for High-Speed Operation of Gas Foil Bearings.
128:670-673.
2006
-
Frequency Dependency of Measured and Predicted Rotordynamic Coefficients for a Load-On-Pad Flexible-Pivot Tilting-Pad Bearing.
128:388-395.
2005
-
Rotordynamic-Coefficients and Static (Equilibrium Loci and Leakage) Characteristics for Short, Laminar-flow Annular Seals.
128:378-387.
2005
-
A Gas-Surface Interaction Model for Spatial and Time-Dependent Friction Coefficient in Reciprocating Contacts: Applications to Near-Frictionless Carbon.
127:82-88.
2005
-
Understanding friction factor behavior in liquid annular seals with deliberately roughened surfaces.
127:213-222.
2005
-
Extracting Summit Roughness Parameters From Random Gaussian Surfaces Accounting for Asymmetry of the Summit Heights.
126:761-766.
2004
-
Fractional Coverage Model for the Adsorption and Removal of Gas Species and Application to Superlow Friction Diamond-Like Carbon.
126:615-619.
2004
-
Nanomechanical Properties of Aluminum 390-T6 Rough Surfaces Undergoing Tribological Testing.
126:573-582.
2004
-
Static Friction Model for Rough Surfaces With Asymmetric Distribution of Asperity Heights.
126:626-629.
2004
-
Adhesion Forces for Sub-10 nm Flying-Height Magnetic Storage Head Disk Interfaces.
126:334-341.
2004
-
Combining and Contacting of Two Rough Surfaces with Asymmetric Distribution of Asperity Heights.
126:225-232.
2004
-
Forced Response of a Squeeze Film Damper and Identification of Force Coefficients From Large Orbital Motions.
126:292-300.
2004
-
Rotordynamic-Coefficient and Leakage Characteristics for Hole-Pattern-Stator Annular Gas Seals—Measurements Versus Predictions.
126:326-333.
2004
-
Flow Visualization and Forces From a Squeeze Film Damper Operating With Natural Air Entrainment.
125:325-333.
2003
-
Performance of Damaged Hydrostatic Bearings: Predictions Versus Experiments.
125:451-456.
2003
-
Theory Versus Experiment for the Rotordynamic Characteristics of a High Pressure Honeycomb Annular Gas Seal at Eccentric Positions.
125:422-429.
2003
-
A Comparison of Rotordynamic-Coefficient Predictions for Annular Honeycomb Gas Seals Using Three Different Friction-Factor Models.
124:524-529.
2002
-
Contact of Rough Surfaces With Asymmetric Distribution of Asperity Heights.
124:367-376.
2002
-
Theory versus experiment for the rotordynamic impedances of two hole-pattern-stator gas annular seals.
124:137-143.
2002
-
Effects of Misalignment on Turbulent Flow Hybrid Thrust Bearings.
124:212-219.
2001
-
Pressure Measurements and Flow Visualization in a Squeeze Film Damper Operating With a Bubbly Mixture.
124:346-350.
2001
-
A Model for Squeeze Film Dampers Operating With Air Entrainment and Validation With Experiments.
123:125-133.
2000
-
Effect of Frequency Excitation on Force Coefficients of Spiral Groove Gas Seals.
121:853-861.
1999
-
Rotordynamic Evaluation of a Near-Tangential-lnjection Hybrid Bearing.
121:886-891.
1999
-
Analytical Approximations in Modeling Contacting Rough Surfaces.
121:234-239.
1999
-
CFD Comparison to 3D Laser Anemometer and Rotordynamic Force Measurements for Grooved Liquid Annular Seals.
121:306-314.
1999
-
Comparison of Predictions With Test Results for Rotordynamic Coefficients of a Four-Pocket Gas Damper Seal.
121:363-369.
1999
-
Experimental Force Coefficients for a Two-Bladed Labyrinth Seal and a Four-Pocket Damper Seal.
121:370-376.
1999
-
Rotordynamic Evaluation of a Roughened-Land Hybrid Bearing.
121:133-138.
1999
-
Test Results for Liquid “Damper” Seals Using a Round-Hole Roughness Pattern for the Stators.
121:42-49.
1999
-
Analysis of Two-Phase Flow in Cryogenic Damper Seals—Part I: Theoretical Model.
120:221-227.
1998
-
Analysis of Two-Phase Flow in Cryogenic Damper Seals—Part II: Model Validation and Predictions.
120:228-233.
1998
-
Finite Element Analysis of Herringbone Groove Journal Bearings: A Parametric Study.
120:234-240.
1998
-
Static Friction of Contacting Real Surfaces in the Presence of Sub-Boundary Lubrication.
120:296-303.
1998
-
Eccentricity Effects on the Rotordynamic Coefficients of Plain Annular Seals: Theory Versus Experiment.
119:443-447.
1997
-
Discussion: “Forces and Moments Due to Misalignment Vibrations in Annular Liquid Seals Using the Averaged Navier-Stokes Equations” (Arghir, M., and Frêne, J., 1997, ASME J. Tribol., 119, pp. 279–287).
119:287-288.
1997
-
Measurements of Static Loading Versus Eccentricity in a Flexure-Pivot Tilting Pad Journal Bearing.
119:297-304.
1997
-
Angled injection-hydrostatic bearings analysis and comparison to test results.
119:179-187.
1997
-
Discussion: “A Global Approach of Thermal Effects Including Pad Deformations in Tilting-Pad Journal Bearings Submitted to Unbalance Load” (Fillon, M., Desbordes, H., Frêne, J., and Chan Hew Wai, C., 1996, ASME J. Tribol., 118, pp. 169–174).
119:227-227.
1997
-
Discussion: “Experimental and Theoretical Rotordynamic Characteristics of a Hybrid Journal Bearing” (Sawicki, J. T., Capaldi, R. J., and Adams, M. L., 1997, ASME J. Tribol., 119, pp. 132–141).
119:141-142.
1997
-
Experimental Study on the Effect of a Circumferential Feeding Groove on the Dynamic Force Response of a Sealed Squeeze Film Damper.
118:900-905.
1996
-
An Extended Three-Control-Volume Theory for Circumferentially-Grooved Liquid Seals.
118:276-285.
1996
-
Transient Analysis of Plain and Tilt Pad Journal Bearings Including Fluid Film Temperature Effects.
118:423-430.
1996
-
A Two-Component Mixed Friction Model for a Lubricated Line Contact.
118:183-189.
1996
-
Turbulent Flow, Flexure-Pivot Hybrid Bearings for Cryogenic Applications.
118:190-200.
1996
-
Boundary and mixed friction in the presence of dynamic normal loads .1. System model (vol 117, pg 255, 1995).
117:574-574.
1995
-
Boundary and mixed friction in the presence of dynamic normal loads .2. Friction transients (vol 117, pg 261, 1995).
117:574-574.
1995
-
Closure to “Discussion of ‘Boundary and Mixed Friction in the Presence of Dynamic Normal Loads: Part II—Friction Transients’” (1995, ASME J. Tribol., 117, p. 748).
117:748-748.
1995
-
Inertia Effects in a Hybrid Bearing With a 45 Degree Entrance Region.
117:498-505.
1995
-
Boundary and Mixed Friction in the Presence of Dynamic Normal Loads: Part II—Friction Transients.
117:261-266.
1995
-
Transient Analysis of Tilt Pad Journal Bearings Including Effects of Pad Flexibility and Fluid Film Temperature.
117:302-307.
1995
-
Erratum: “Boundary and Mixed Friction in the Presence of Dynamic Normal Loads: Part II—Friction Transients” [1995, ASME Journal of Tribology, 117(2), pp. 261–266].
117:574-574.
1995
-
Erratum: “Boundary and Mixed Friction in the Presence of Dynamic Normal Loads: Part I—System Model” [1995, ASME Journal of Tribology, 117(2), pp. 255–260].
117:574-574.
1995
-
Two-Dimensional Models of Boundary and Mixed Friction at a Line Contact.
117:178-184.
1995
-
Boric Acid as an Additive for Core-Drilling of Alumina.
117:65-73.
1995
-
Theory Versus Experiment for the Rotordynamic Characteristics of a Smooth Annular Gas Seal at Eccentric Positions.
117:148-152.
1995
-
Turbulent Flow Foil Bearings for Cryogenic Applications.
117:185-195.
1995
-
A Test Apparatus and Facility to Identify the Rotordynamic Coefficients of High-Speed Hydrostatic Bearings.
116:337-343.
1994
-
Annular Honeycomb-Stator Turbulent Gas Seal Analysis Using a New Friction-Factor Model Based on Flat Plate Tests.
116:352-359.
1994
-
Discussion: “Roughness Influence on Turbulent Flow Through Annular Seals” (Lucas, Victor, Danaila, Sterian, Bonneau, Olivier, and Frêne, Jean, 1994, ASME J. Tribol., 116, pp. 321–328).
116:328-328.
1994
-
Effect of a Circumferential Feeding Groove on the Dynamic Force Response of a Short Squeeze Film Damper.
116:369-376.
1994
-
Experimental Test Results for Four High-Speed, High-Pressure, Orifice-Compensated Hybrid Bearings.
116:147-153.
1994
-
Discussion: “The Effects of Fixed Rotor Tilt on the Rotordynamic Coefficients of Incompressible Flow Annular Seals” (Scharrer, J. K., Rubin, N., and Nelson, C. C., 1993, ASME J. Tribol., 115, pp. 336–340).
115:340-341.
1993
-
Lubrication With Binary Mixtures: Liquid-Liquid Emulsion in an EHL Conjunction.
115:515-522.
1993
-
Lubrication With Emulsion in Cold Rolling.
115:523-531.
1993
-
The Effect of Journal Misalignment on the Operation of a Turbulent Flow Hydrostatic Bearing.
115:355-363.
1993
-
Lubrication With Binary Mixtures: Bubbly Oil.
115:253-260.
1993
-
Thermal Effects in Cryogenic Liquid Annular Seals—Part I: Theory and Approximate Solution.
115:267-276.
1993
-
Thermal Effects in Cryogenic Liquid Annular Seals—Part II: Numerical Solution and Results.
115:277-284.
1993
-
Closure to “Discussion of ‘Numerical Simulation of the Overrolling of a Surface Feature in an EHL Line Contact’” (1993, ASME J. Tribol., 115, p. 203).
115:203-203.
1993
-
Dynamic Force and Moment Coefficients for Short Length Annular Seals.
115:61-70.
1993
-
Experimental Pressures and Film Forces in a Squeeze Film Damper.
115:134-140.
1993
-
Experimental Versus Theoretical Characteristics of a High-Speed Hybrid (Combination Hydrostatic and Hydrodynamic) Bearing.
115:160-168.
1993
-
Lubrication With Binary Mixtures: Liquid-Liquid Emulsion.
115:46-55.
1993
-
Analysis of Hydrostatic Journal Bearings With End Seals.
114:802-811.
1992
-
Friction-Factor Characteristics for Narrow Channels With Honeycomb Surfaces.
114:714-721.
1992
-
Friction-Factor Data for Flat-Plate Tests of Smooth and Honeycomb Surfaces.
114:722-729.
1992
-
Discussion: “Entry Flow and Pressure Jump in Submerged Multi-Pad Bearings and Grooved Bearings” (Mori, A., Makino, T., and Mori, H., 1992, ASME J. Tribol., 114, pp. 370–377).
114:377-378.
1992
-
Analysis of hydrostatic journal bearings with end seals.
114:802-811.
1992
-
Analysis of short squeeze film dampers with a central groove.
114:659-665.
1992
-
Analysis of turbulent hydrostatic bearings with a barotropic cryogenic fluid.
114:755-764.
1992
-
Friction-factor characteristics for narrow channels with honeycomb surfaces.
114:714-721.
1992
-
Friction-factor data for flat-plate tests of smooth and honeycomb surfaces.
114:722-730.
1992
-
Analysis of Variable Fluid Properties, Turbulent Annular Seals.
113:694-702.
1991
-
Test results for rotordynamic coefficients of the SSME HPOTP turbine interstage seal with two swirl brakes.
113:577-583.
1991
-
Turbulent Hybrid Bearings With Fluid Inertia Effects.
112:699-707.
1990
-
A FINITE-ELEMENT APPROACH TO PAD FLEXIBILITY EFFECTS IN TILT PAD JOURNAL BEARINGS .2. ASSEMBLED BEARING AND SYSTEM-ANALYSIS.
112:178-182.
1990
-
A Finite Element Approach to Pad Flexibility Effects in Tilt Pad Journal Bearings: Part I—Single Pad Analysis.
112:169-176.
1990
-
ADDITIONAL TEST-RESULTS FOR ROUND-HOLE-PATTERN DAMPER SEALS - LEAKAGE, FRICTION FACTORS, AND ROTORDYNAMIC FORCE COEFFICIENTS.
112:365-371.
1990
-
TEST-RESULTS FOR TURBULENT ANNULAR SEALS, USING SMOOTH ROTORS AND HELICALLY GROOVED STATORS.
112:254-258.
1990
-
Approximate analysis of turbulent hybrid bearings. Static and dynamic performance for centered operation.
112:692-698.
1990
-
An Entrance Region Friction Factor Model Applied to Annular Seal Analysis: Theory Versus Experiment for Smooth and Honeycomb Seals.
111:337-343.
1989
-
Annular Honeycomb Seals: Test Results for Leakage and Rotordynamic Coefficients; Comparisons to Labyrinth and Smooth Configurations.
111:293-300.
1989
-
Approximate Design of Statically Loaded Cylindrical Journal Bearings.
111:390-393.
1989
-
Experimental Results for Labyrinth Gas Seals With Honeycomb Stators: Comparisons to Smooth-Stator Seals and Theoretical Predictions.
111:161-168.
1989
-
A Thermohydrodynamic Analysis of Journal Bearings Lubricated by a Non-Newtonian Fluid.
110:414-420.
1988
-
Analysis for Rotordynamic Coefficients of Helically-Grooved Turbulent Annular Seals.
109:136-143.
1987
-
Flow of a Fluid of the Differential Type in a Journal Bearing.
109:100-107.
1987
-
Test Results for Sawtooth-Pattern Damper Seals: Leakage and Rotordynamic Coefficients.
109:124-128.
1987
-
Test results for sawtooth-pattern damper seals: Leakage and rotordynamic coefficients.
109:124-128.
1987
-
Test Results For Round-Hole-Pattern Damper Seals: Optimum Configurations and Dimensions for Maximum Net Damping.
108:605-609.
1986
-
Theory Versus Experiment for the Rotordynamic Coefficients of Annular Gas Seals: Part 1—Test Facility and Apparatus.
108:426-431.
1986
-
Theory Versus Experiment for the Rotordynamic Coefficients of Annular Gas Seals: Part 2—Constant-Clearance and Convergent-Tapered Geometry.
108:433-437.
1986
-
Analysis and Testing for Rotordynamic Coefficients of Turbulent Annular Seals With Different, Directionally-Homogeneous Surface-Roughness Treatment for Rotor and Stator Elements.
107:296-305.
1985
-
Convergent-Tapered Annular Seals: Analysis and Testing for Rotordynamic Coefficients.
107:307-316.
1985
-
Application of Elastic-Plastic Static Friction Models to Rough Surfaces With Asymmetric Asperity Distribution (vol 132, 031602, 2010)
2010
-
Thermohydrodynamic Model Predictions and Performance Measurements of Bump-Type Foil Bearing for Oil-Free Turboshaft Engines in Rotorcraft Propulsion Systems
2009
-
Investigation of Contact Stiffness and Contact Damping for Magnetic Storage Head-Disk Interfaces
2008
-
Identification of Force Coefficients in a Squeeze Film Damper With a Mechanical End Seal—Centered Circular Orbit Tests
2007
-
Hybrid Flexure Pivot-Tilting Pad Gas Bearings: Analysis and Experimental Validation
2006
-
Understanding Friction Factor Behavior in Liquid Annular Seals With Deliberately Roughened Surfaces
2005
-
Analysis of Squeeze Film Dampers Operating With Bubbly Lubricants
2000
-
Bulk-Flow Analysis of Hybrid Thrust Bearings for Process Fluid Applications
1999
-
Dynamic Force Coefficients of a Multiple-Blade, Multiple-Pocket Gas Damper Seal: Test Results and Predictions
1999
-
On the Numerical Modeling of High-Speed Hydrodynamic Gas Bearings
1999
-
Angled Injection—Hydrostatic Bearings Analysis and Comparison to Test Results
1997
-
Effects of Wall Flexibility on the Rotordynamic Coefficients of Turbulent Cryogenic Annular Seals
1996
-
Turbulent Flow, Flexure-Pivot Hybrid Bearings for Cryogenic Applications
1996
-
Theoretical and Experimental Comparisons for Rotordynamic Coefficients of a High-Speed, High-Pressure, Orifice-Compensated Hybrid Bearing
1995
-
Analysis of Short Squeeze Film Dampers With a Central Groove
1992
-
Analysis of Turbulent Hydrostatic Bearings With a Barotropic Cryogenic Fluid
1992
-
Test Results for Rotordynamic Coefficients of the SSME HPOTP Turbine Interstage Seal With Two Swirl Brakes
1991
-
Seal-Rotordynamic-Coefficient Test Results for a Model SSME ATD-HPFTP Turbine Interstage Seal With and Without a Swirl Brake
1991
-
Approximate Analysis of Turbulent Hybrid Bearings. Static and Dynamic Performance for Centered Operation
1990
-
A Finite Element Approach to Pad Flexibility Effects in Tilt Pad Journal Bearings: Part II—Assembled Bearing and System Analysis
1990
-
Additional Test Results for Round-Hole-Pattern Damper Seals: Leakage, Friction Factors, and Rotordynamic Force Coefficients
1990
-
An Annular Gas Seal Analysis Using Empirical Entrance and Exit Region Friction Factors
1990
-
Test Results for Turbulent Annular Seals, Using Smooth Rotors and Helically Grooved Stators
1990
Identity
International Standard Serial Number (ISSN)