publisher of
- Multiscale Characterization of Rejuvenated RAP Binders. Journal of Testing and Evaluation. 51:20220229-20220229. 2023
- Improvements in Test Procedure and Data Reduction for the Borehole Erosion Test. GEOTECHNICAL TESTING JOURNAL. 46:295-315. 2023
- A Graphical Representation of Sensor Mapping for Machine Tool Fault Monitoring and Prognostics for Smart Manufacturing. Smart and Sustainable Manufacturing Systems. 7:20220031-20220031. 2023
- Experimental Studies and Sustainability Assessments of Quarry Dust for Chemical Treatment of Expansive Soils 2023
- Influence of Packing Density on Electrochemical Performance of Lignin. Materials Performance and Characterization. 12:179-197. 2023
- In-Process Dimension Monitoring System for Integration of Legacy Machine Tools into the Industry 4.0 Framework 2021
- Effects of Oven Temperature and Addition of Ethanol on Measurement of Water Content and Specific Gravity of Cement-Stabilized Soft Clay 2021
- Estimation of Undrained Shear Strength of Overconsolidated Clay Using a Maximum Excess Pore Pressure Method Based on Piezocone Penetration Test (CPTU). GEOTECHNICAL TESTING JOURNAL. 44:1153-1162. 2021
- Full-Scale Experimental Study on the Single and Group of Soil-Cement Columns under Vertical Load Applying for Buildings 2021
- Portable WIM Systems: Comparison of Sensor Installation Methods for Site-Specific Traffic Data Measurements. Journal of Testing and Evaluation. 49:20190040-20190040. 2021
- Assessment of Sulfate-Induced Heave in Chemically Treated Soils Using a Novel Hybrid Sensor. GEOTECHNICAL TESTING JOURNAL. 44:30-47. 2021
- Corrosive Behavior of 3D-Printed 316L Stainless Steel. Materials Performance and Characterization. 10:74-86. 2021
- Bidirectional Gated Recurrent Deep Learning Neural Networks for Smart Acoustic Emission Sensing of Natural Fiber-Reinforced Polymer Composite Machining Process. Smart and Sustainable Manufacturing Systems. 4:179-198. 2020
- Identification of Microstructures in 3-DPrinted Ti-6Al-4V Using Acoustic Emission Cepstrum. Smart and Sustainable Manufacturing Systems. 4:20190044-20190044. 2020
- Mechanistic-Empirical Compatible Traffic Data Generation: Portable Weigh-in-Motion versus Cluster Analysis. Journal of Testing and Evaluation. 48:20190745-20190745. 2020
- Resilient Modulus of Expansive Soils at High Suction Using Vapor Pressure Control. GEOTECHNICAL TESTING JOURNAL. 43:720-736. 2020
- Cybersecurity Assurance in the Emerging Manufacturing-as-a-Service (MaaS) Paradigm: A Lesson from the Video Streaming Industry. Smart and Sustainable Manufacturing Systems. 4:324-329. 2020
- Reliability-Based Specification for Asphalt Concrete Pavements. Journal of Testing and Evaluation. 48:41-51. 2020
- Performance Evaluation of a Bridge Infrastructure Using Terrestrial Laser Scanning Technology. GEOTECHNICAL TESTING JOURNAL. 42:1587-1605. 2019
- Assessment of Traffic Data for Road Rehabilitation Design: A Case Study of the Korogwe-Mombo Road Section in Tanzania. Journal of Testing and Evaluation. 47:20180072-20180072. 2019
- Nanofluidic Behavior at the Fluid-Solid Interface. Materials Performance and Characterization. 8:538-550. 2019
- Electrochemical Characterization of a Nickel-Phosphorus Coating on Diamond Grits. Materials Performance and Characterization. 7:266-280. 2018
- Evaluation of Several Sampling Procedures for Spatial Analysis of Natural Turfgrass Sports Field Properties. Journal of Testing and Evaluation. 46:714-729. 2018
- Mechanistic and Economic Impacts of Using Asphalt Rubber Mixtures at Various Vehicle Speeds. Advances in Civil Engineering Materials. 7:347-359. 2018
- Dynamic Modeling and Explicit Control of a PEM Water Electrolysis Process. Smart and Sustainable Manufacturing Systems. 2:25-43. 2018
- Reliability of C-H-O Symbiosis Networks under Source Streams Uncertainty. Smart and Sustainable Manufacturing Systems. 2:132-153. 2018
- Optimization of the Cool-Down Process for a System of Sintering Furnaces. Smart and Sustainable Manufacturing Systems. 2:64-86. 2018
- Use of Constant Energy Source in SASW Test and Its Influence on Seismic Response Analysis. GEOTECHNICAL TESTING JOURNAL. 41:1102-1116. 2018
- Design and Evaluation of a Moisture/Suction TDR Probe. GEOTECHNICAL TESTING JOURNAL. 40:762-775. 2017
- Tribological Behavior of Oil-Lubricated Laser Textured Steel Surfaces in Conformal Flat and Non-Conformal Contacts 2017
- Characterization of Healing of Asphalt Mixtures Using Creep and Step-Loading Recovery Test 2016
- Assessment of Measurement Errors of Piezocone Penetration Test in Soft Clay. GEOTECHNICAL TESTING JOURNAL. 39:721-741. 2016
- Characterization of Compacted Silty Sand Using a Double-Walled Triaxial Cell With Fully Automated Relative-Humidity Control. GEOTECHNICAL TESTING JOURNAL. 39:742-756. 2016
- Accelerated Concrete-Cylinder Test for Alkali-Silica Reaction. Journal of Testing and Evaluation. 44:1229-1238. 2016
- Measuring Cement Paste Rheology Using a Modified Dynamic Shear Rheometer: An Approach to Detect Cement-Admixtures Incompatibilities. Advances in Civil Engineering Materials. 3:40-65. 2014
- Fracture and Viscoelastic Properties of Asphalt Binders During Fatigue and Rest Periods. Journal of Testing and Evaluation. 42:109-117. 2014
- Nano-Mechanical Characterization of Mastic, Aggregate, and Interfacial Zone in Asphalt Composites. Journal of Testing and Evaluation. 41:20120178-20120178. 2013
- The Pocket Erodometer Test: Development and Preliminary Results 2012
- In Situ Matric Suction and Moisture Content Measurements in Expansive Clay during Seasonal Fluctuations. GEOTECHNICAL TESTING JOURNAL. 35:103597-103597. 2012
- Inclined Tensile Load Testing on Short Drilled Shafts. GEOTECHNICAL TESTING JOURNAL. 35:103343-103343. 2012
- Laboratory and Field Evaluation of Cement-Treated Reclaimed Asphalt Pavement Blends as Roadway Base Material. Journal of the American Society for Testing and Materials (ASTM) International. 9:103714-103714. 2012
- A Servo/Suction-Controlled Ring Shear Apparatus for Unsaturated Soils: Development, Performance, and Preliminary Results. GEOTECHNICAL TESTING JOURNAL. 34:103598-103598. 2011
- Assessment of the Coefficient of Lateral Earth Pressure at Rest (Ko) from In Situ Seismic Tests. GEOTECHNICAL TESTING JOURNAL. 34:102520-102520. 2011
- Comparative Study on Recovered Binder Properties Using Three Asphalt Emulsion Recovery Methods. Journal of Testing and Evaluation. 38:653-659. 2010
- Analysis of Impact of Various Factors on Downwind Deposition Using a Simulation Method. Journal of the American Society for Testing and Materials (ASTM) International. 7:102771-102771. 2010
- Laboratory Measurement of the Actual Tire-Pavement Contact Pressure Using a Static Test Device. Journal of Testing and Evaluation. 38:102054-102054. 2010
- Determination of Volumetric Properties for Permeable Friction Course Mixtures. Journal of Testing and Evaluation. 37:101696-101696. 2009
- Effects of Densification on Permeable Friction Course Mixtures. Journal of Testing and Evaluation. 37:101808-101808. 2009
- Tribochemistry of Multiply Alkylated Cyclopentane Oils on Diamond-like Carbon (DLC) Coated Thrust Bearings. Journal of the American Society for Testing and Materials (ASTM) International. 5:101223-101223. 2008
- A Simple and Effective Laboratory Test Device for Measuring Tire-Pavement Contact Pressure 2008
- Laboratory Procedure to Obtain Well-Mixed Soil Binder Samples of Medium Stiff to Stiff Expansive Clayey Soil for Deep Soil Mixing Simulation. GEOTECHNICAL TESTING JOURNAL. 31:100936-100936. 2008
- Suitability of Dynamic and Relaxation Tests for the Evaluation of Moisture Susceptibility of Asphalt Mixtures. Journal of Testing and Evaluation. 36:101267-101267. 2008
- Bitumen surface energy characterization by inverse gas chromatography. Journal of Testing and Evaluation. 35:233-239. 2007
- Conditioned Microplitis croceipes Cresson (Hymenoptera: Braconidae) detect and respond to 2,4-DNT: development of a biological sensor.. Journal of Forensic Sciences. 50:1187-1190. 2005
- Wear Behavior of Niobium Boride Coatings. Journal of the American Society for Testing and Materials (ASTM) International. 2:13083-13083. 2005
- Black soldier fly (Diptera: Stratiomyidae) colonization of pig carrion in south Georgia.. Journal of Forensic Sciences. 50:152-153. 2005
- Modeling Drying Shrinkage Stress Gradients in Concrete. Cement, Concrete and Aggregates. 26:1-8. 2004
- Volumetric Shrinkage Strain Measurements in Expansive Soils Using Digital Imaging Technology. GEOTECHNICAL TESTING JOURNAL. 27:12069-12069. 2004
- Evaluation of a modified soluble sulfate determination method for fine-grained cohesive soils. GEOTECHNICAL TESTING JOURNAL. 25:85-94. 2002
- Midsagittal facial tissue thicknesses of children and adolescents from the Montreal growth study.. Journal of Forensic Sciences. 46:1294-1302. 2001
- Evaluation tests for colloidal silica for use in grouting applications. GEOTECHNICAL TESTING JOURNAL. 21:264-269. 1998
- Genotoxicity of model and complex mixtures of polycyclic aromatic hydrocarbons 1996
- Three-Dimensional Finite Element Progressive Failure Analysis of Composite Laminates Under Axial Extension 1993
- TIME-DOMAIN ULTRASONIC NDE OF THE WAVE VELOCITY OF A SUB-HALF-WAVELENGTH ELASTIC LAYER. Journal of Testing and Evaluation. 21:29-35. 1993
- DYNAMIC SHEAR MODULUS MEASUREMENTS WITH 4 INDEPENDENT TECHNIQUES IN NICKEL-BASED ALLOYS. Journal of Testing and Evaluation. 20:321-323. 1992
- TIME-DOMAIN ULTRASONIC MEASUREMENT OF THE THICKNESS OF A SUB-HALF-WAVELENGTH ELASTIC LAYER. Journal of Testing and Evaluation. 20:265-274. 1992
- Calibration of a Dynamic Penetrometer for Compaction Quality Control of Boiler Slag. GEOTECHNICAL TESTING JOURNAL. 14:56-56. 1991
- DYNAMIC YOUNG MODULUS MEASUREMENTS IN METALLIC MATERIALS - RESULTS OF AN INTERLABORATORY TESTING PROGRAM 1989
- AN EXPERIMENTAL-TECHNIQUE FOR DETERMINING A MEASURE OF STRUCTURAL DAMPING. Journal of Testing and Evaluation. 16:77-85. 1988
- A MIXED UPDATED LAGRANGIAN FORMULATION FOR PLANE ELASTIC PROBLEMS. Journal of Composites Technology and Research. 9:131-140. 1987
- Chapter 46 | Lubrication Fundamentals. 1565-1630. 2019
- Dynamic Friction Characterization and Modeling of Tripod Constant Velocity Joints. 437-453. 2012
- Laboratory and Field Evaluation of Cement-Treated Reclaimed Asphalt Pavement Blends as Roadway Base Material. 437-453. 2012
- Laboratory and Field Evaluation of Cement-Treated Reclaimed Asphalt Pavement Blends as Roadway Base Material. 437-453. 2012
- Cold Starting and Pumpability Studies in Modern Engines Results from the ASTM D02.07C Low Temperature Engine Performance Task Force Activities: Background and Organization. 3-3-6. 2000
- Cold Starting and Pumpability Studies in Modern Engines Results from the ASTM D02.07C Low Temperature Engine Performance Task Force Activities: Cold Start Testing. 19-19-16. 2000
- Cold Starting and Pumpability Studies in Modern Engines Results from the ASTM D02.07C Low Temperature Engine Performance Task Force Activities: Engine Selection and Testing Protocol. 9-9-7. 2000
- Cold Starting and Pumpability Studies in Modern Engines Results from the ASTM D02.07C Low Temperature Engine Performance Task Force Activities: Phase I Pumpability Testing. 35-35-20. 2000
- Cold Starting and Pumpability Studies in Modern Engines Results from the ASTM D02.07C Low Temperature Engine Performance Task Force Activities: Phase II Pumpability Testing. 55-55-24. 2000
- Cold Starting and Pumpability Studies in Modern Engines Results from the ASTM D02.07C Low Temperature Engine Performance Task Force Activities: Summary and Conclusions. 79-79-17. 2000
- Cold Starting and Pumpability Studies in Modern Engines Results from the ASTM D02.07C Low Temperature Engine Performance Task Force Activities: Test Oil Selection and Rheological Analysis. 16-16-3. 2000
- Damping Behavior of 6061 Al/SiC/Gr Spray-Deposited Composites. 313-330. 1997
- Overview. 1-1-2. 1997
- Overview. 1-1-2. 1992
- Mode II delamination fracture toughness of unidirectional graphite/epoxy composites 1989
- Oil Spill Dispersants: Does South Africa Have an Alternative?. 414-427. 1984
- An Eddy-Current Decay Technique for Low-Temperature Resistivity Measurements. 157-157-16-172. 1981
- Development of a Predictive Wear Model for Grid-to-Rod Fretting in Light Water Nuclear Reactors. ASTM Special Technical Publication. 139-158. 2013
- Lime Stabilization of Subgrade Soils for Structural Purposes: Past Evidence and Future Needs. ASTM Special Technical Publication. 35-59. 2012
- The Use of Hydrated Lime in Concrete as a Cement Replacement: Effect on Compressive Strength. ASTM Special Technical Publication. 106-112. 2012
- Image analysis techniques to determine fine aggregate angularity. 128-143. 2001
- Residual stress effects in railroad rail fatigue. ASTM Special Technical Publication. 614-625. 1999
- Advances in application efficacy for chemigation systems with experimental nozzle technology. 82-92. 1995
- Impact of air infiltration in frame walls on energy loads: Taking advantage of the interaction between infiltration, solar radiation, and conduction. 178-196. 1995
- EFFECT OF STRAIN-MEASUREMENTS ON RESILIENT MODULUS OF SANDS. 202-221. 1994
- FIELD VALIDATION OF A METHODOLOGY TO IDENTIFY MATERIAL PROPERTIES IN PAVEMENTS MODELED AS LAYERED VISCOELASTIC HALFSPACES. 159-169. 1994
- A Finite-Element Analysis of Nonlinear Behavior of the End-Loaded Split Laminate Specimen. ASTM Special Technical Publication. 649-649-19-667. 1993
- A FUNDAMENTAL CONNECTION BETWEEN INTRINSIC MATERIAL DAMPING AND STRUCTURAL DAMPING. 396-420. 1992
- DAMPING AND DYNAMIC ELASTIC-MODULUS OF CERAMICS AND CERAMIC-MATRIX COMPOSITES AT ELEVATED-TEMPERATURES. 431-446. 1992
- IRREVERSIBLE HEAT-TRANSFER AS A SOURCE OF THERMOELASTIC DAMPING. 94-123. 1992
- MODELING AND MEASUREMENT OF AXIAL AND FLEXURAL DAMPING IN METAL-MATRIX COMPOSITES. 282-315. 1992
- SOME IMPROVEMENTS IN THE FLEXURAL DAMPING MEASUREMENT TECHNIQUE. 457-470. 1992
- AN EXPERIMENTAL-STUDY OF THE COMPLEX DYNAMIC MODULUS. 58-74. 1990
- ENGINEERING AND COMPACTION CHARACTERISTICS OF BOILER SLAG. 123-141. 1990
- MEASUREMENT OF THE MODULUS OF DYNAMIC ELASTICITY OF EXTREMELY THIN (SUBWAVELENGTH) SPECIMENS. 18-46. 1990
- The Wak Test to Check the Increase in Soil Stiffness Due to Dynamic Compaction. 107-107-16-122. 1990
- Oil Spill Dispersants: Does South Africa Have an Alternative?. ASTM Special Technical Publication. 414-414-14-427. 1984
- Crack-Tip Stress and Deformation Fields in a Solid with a Vertex on Its Yield Surface. i-80-i-80-36-115. 1983