HR job title
- Associate Professor
- Contact Info
Ma, Chao Assistant Professor
Positions
- Assistant Professor, Engineering Technology and Industrial Distribution, College of Engineering
- Overview
- Publications
- Research
- Teaching
- Background
- Contact
- Other
- View All
Overview
Publications
selected publications
-
academic article
-
Moghadasi, M., Mahdaviarab, A., Hofer, A., Bermejo, R., Pei, Z., & Ma, C.
(2023).
Press-compaction-assisted binder jetting of textured ceramics. Ceramics International.
49(23), 39214-39222.
-
Porter, Q., Moghadasi, M., Pei, Z., & Ma, C.
(2023).
Dense and strong ceramic composites via binder jetting and spontaneous infiltration. Ceramics International.
49(11), 17363-17370.
-
Miao, G., Moghadasi, M., Li, M., Pei, Z., & Ma, C.
(2023).
Binder Jetting Additive Manufacturing: Powder Packing in Shell Printing. Journal of Manufacturing and Materials Processing.
7(1), 4-4.
-
Porter, Q., Li, M., Pei, Z., & Ma, C.
(2022).
Binder Jetting Additive Manufacturing: The Effect of Feed Region Density on Resultant Densities. 144(9),
-
Porter, Q., Pei, Z., & Ma, C.
(2022).
Binder Jetting and Infiltration of Metal Matrix Nanocomposites. 144(7),
-
Miao, G., Du, W., Pei, Z., & Ma, C.
(2022).
A literature review on powder spreading in additive manufacturing. ADDITIVE MANUFACTURING.
58, 103029-103029.
-
Li, M., Miao, G., Du, W., Pei, Z., & Ma, C.
(2022).
Difference between powder bed density and green density for a free-flowing powder in binder jetting additive manufacturing. Journal of Manufacturing Processes.
84, 448-456.
-
Miao, G., Moghadasi, M., Du, W., Pei, Z., & Ma, C.
(2022).
Experimental investigation on the effect of roller traverse and rotation speeds on ceramic binder jetting additive manufacturing. Journal of Manufacturing Processes.
79, 887-894.
-
Martinez-Franco, E., Trejo-Camacho, J., Ma, C., Diaz de la Torre, S., Garcia-Moreno, A. I., Benitez-Castro, A. M., ... Munoz-Saldana, J.
(2022).
Mechanical characterization by multiscale indentation of particle reinforced Nickel-Alumina metal matrix nanocomposites obtained by high-kinetic processing of ball milling and spark plasma sintering. Journal of Alloys and Compounds.
927, 166880-166880.
-
Du, W., Li, M., Pei, Z., & Ma, C.
(2022).
Performances of three models in predicting packing densities and optimal mixing fractions of mixtures of micropowders with different sizes. Powder Technology.
397, 117095-117095.
-
Moghadasi, M., Miao, G., Li, M., Pei, Z., & Ma, C.
(2021).
Combining powder bed compaction and nanopowders to improve density in ceramic binder jetting additive manufacturing. Ceramics International.
47(24), 35348-35355.
-
Du, W., Roa, J., Hong, J., Liu, Y., Pei, Z., & Ma, C.
(2021).
Binder Jetting Additive Manufacturing: Effect of Particle Size Distribution on Density. 143(9),
-
Huang, J., Miscles, E., Mellor, T., Ma, C., Kuttolamadom, M., & Wang, J.
(2021).
Effects of Size and Surface Treatment on Fatigue Life of Fused Filament Fabrication Manufactured Acrylonitrile Butadiene Styrene Parts. 143(8),
-
Li, M., Huang, J., Fang, A., Mansoor, B., Pei, Z., & Ma, C.
(2021).
Binder jetting additive manufacturing of copper/diamond composites: An experimental study. Journal of Manufacturing Processes.
70, 205-213.
-
Li, M., Wei, X., Pei, Z., & Ma, C.
(2021).
Binder jetting additive manufacturing: observations of compaction-induced powder bed surface defects. Manufacturing letters.
28, 50-53.
-
Du, W., Miao, G., Pei, Z., & Ma, C.
(2021).
Comparison of Flowability and Sinterability Among Different Binder Jetting Feedstock Powders: Nanopowder, Micropowder, and Granulated Powder. Journal of Micro and Nano-Manufacturing.
9(2),
-
Wei, X., Moghadasi, M., Du, W., Ma, C., & Pei, Z.
(2021).
Experimental investigation on ultrasonic hopper dispensing system in powder bed additive manufacturing. Journal of Manufacturing Processes.
71, 106-112.
-
Porter, Q., Li, X., & Ma, C.
(2021).
Pressing and Infiltration of Metal Matrix Nanocomposites. Journal of Manufacturing and Materials Processing.
5(2), 54-54.
-
Huang, J., Li, M., Wang, J., Pei, Z., Mclntyre, P., & Ma, C.
(2021).
Selective laser melting of tungsten: Effects of hatch distance and point distance on pore formation. Journal of Manufacturing Processes.
61, 296-302.
-
Renner, P., Chen, Y., Li, M., Ma, C., Parkinson, D., & Liang, H.
(2021).
Corrosive Behavior of 3D-Printed 316L Stainless Steel. Materials Performance and Characterization.
10(1), 74-86.
-
Porter, Q., Morrow, J., & Ma, C.
(2020).
Selective laser melting of 316L stainless steel: homogeneity of thermal history, microstructure, and mechanical properties. 111(11-12), 3343-3350.
-
Duan, X., Li, S., Medellin, A., Ma, C., & Zou, J.
(2020).
A two-axis water-immersible micro scanning mirror using hybrid polymer and elastomer hinges. Sensors and Actuators A: Physical.
312, 112108-112108.
-
Li, M., Du, W., Elwany, A., Pei, Z., & Ma, C.
(2020).
Metal Binder Jetting Additive Manufacturing: A Literature Review. 142(9),
-
Du, W., Ren, X., Pei, Z., & Ma, C.
(2020).
Ceramic Binder Jetting Additive Manufacturing: A Literature Review on Density. 142(4),
-
Miao, G., Du, W., Moghadasi, M., Pei, Z., & Ma, C.
(2020).
Ceramic binder jetting additive manufacturing: Effects of granulation on properties of feedstock powder and printed and sintered parts. ADDITIVE MANUFACTURING.
36, 101542-101542.
-
Moghadasi, M., Du, W., Li, M., Pei, Z., & Ma, C.
(2020).
Ceramic binder jetting additive manufacturing: Effects of particle size on feedstock powder and final part properties. Ceramics International.
46(10), 16966-16972.
-
Medellin, A., Du, W., Miao, G., Zou, J., Pei, Z., & Ma, C.
(2019).
Vat Photopolymerization3D Printing of Nanocomposites: A Literature Review. 7(3),
-
Du, W., Ren, X., Ma, C., & Pei, Z.
(2019).
Ceramic binder jetting additive manufacturing: Particle coating for increasing powder sinterability and part strength. Materials Letters.
234, 327-330.
-
Yu, T., Li, M., Breaux, A., Atri, M., Obeidat, S., & Ma, C.
(2019).
Experimental and numerical study on residual stress and geometric distortion in powder bed fusion process. Journal of Manufacturing Processes.
46, 214-224.
-
Li, M., Fang, A., Martinez-Franco, E., Alvarado-Orozco, J. M., Pei, Z., & Ma, C.
(2019).
Selective laser melting of metal matrix composites: Feedstock powder preparation by electroless plating. Materials Letters.
247, 115-118.
-
Diptanshu, .., Miao, G., & Ma, C.
(2019).
Vat photopolymerization 3D printing of ceramics: Effects of fine powder. Manufacturing letters.
21, 20-23.
-
Li, H., Ramezani, M., Li, M., Ma, C., & Wang, J.
(2018).
Effect of process parameters on tribological performance of 316L stainless steel parts fabricated by selective laser melting. Manufacturing letters.
16, 36-39.
-
Vadali, M., Ma, C., Li, X., Pfefferkorn, F. E., & Duffie, N. A.
(2018).
Intelligent scan trajectories for pulsed laser polishing. International Journal of Mechatronics and Manufacturing Systems.
11(2/3), 101-101.
-
Li, H., Ramezani, M., Li, M., Ma, C., & Wang, J.
(2018).
Tribological performance of selective laser melted 316L stainless steel. Tribology International.
128, 121-129.
-
Ma, C., Chen, L., Cao, C., & Li, X.
(2017).
Nanoparticle-induced unusual melting and solidification behaviours of metals. Nature Communications.
8(1), 14178.
-
Ma, C., Zhao, J., Cao, C., Lin, T., & Li, X.
(2016).
Fundamental Study on Laser Interactions With Nanoparticles-Reinforced MetalsPart I: Effect of Nanoparticles on Optical Reflectivity, Specific Heat, and Thermal Conductivity. 138(12), 121001.
-
Ma, C., Zhao, J., Cao, C., Lin, T., & Li, X.
(2016).
Fundamental Study on Laser Interactions With Nanoparticles-Reinforced MetalsPart II: Effect of Nanoparticles on Surface Tension, Viscosity, and Laser Melting. 138(12), 121002.
-
Ma, C., Chen, L., Xu, J., Zhao, J., & Li, X.
(2015).
Control of fluid dynamics by nanoparticles in laser melting. Journal of Applied Physics.
117(11), 114901-114901.
-
Wang, Q., Morrow, J. D., Ma, C., Duffie, N. A., & Pfefferkorn, F. E.
(2015).
Surface prediction model for thermocapillary regime pulsed laser micro polishing of metals. Journal of Manufacturing Processes.
20, 340-348.
-
Ma, C., Vadali, M., Li, X., Duffie, N. A., & Pfefferkorn, F. E.
(2014).
Analytical and Experimental Investigation of Thermocapillary Flow in Pulsed Laser Micropolishing. 2(2), 021010.
-
Ma, C., Vadali, M., Duffie, N. A., Pfefferkorn, F. E., & Li, X.
(2013).
Melt Pool Flow and Surface Evolution During Pulsed Laser Micro Polishing of Ti6Al4V. 135(6), 061023.
-
Li, H., Choi, H., Ma, C., Zhao, J., Jiang, H., Cai, W., Abell, J. A., & Li, X.
(2013).
Transient Temperature and Heat Flux Measurement in Ultrasonic Joining of Battery Tabs Using Thin-Film Microsensors. 135(5), 051015.
-
Ma, C., Chen, L., Xu, J., Fehrenbacher, A., Li, Y., Pfefferkorn, F. E., ... Li, X.
(2013).
Effect of fabrication and processing technology on the biodegradability of magnesium nanocomposites. Journal of Biomedical Materials Research - Part B Applied Biomaterials.
101(5), 870-877.
-
Pfefferkorn, F. E., Duffie, N. A., Li, X., Vadali, M., & Ma, C.
(2013).
Improving surface finish in pulsed laser micro polishing using thermocapillary flow. 62(1), 203-206.
-
Vadali, M., Ma, C., Duffie, N. A., Li, X., & Pfefferkorn, F. E.
(2013).
Effects of Pulse Duration on Laser Micro Polishing. Journal of Micro and Nano-Manufacturing.
1(1), 011006.
-
Chen, L., Konishi, H., Fehrenbacher, A., Ma, C., Xu, J., Choi, H., ... Li, X.
(2012).
Novel nanoprocessing route for bulk graphene nanoplatelets reinforced metal matrix nanocomposites. Scripta Materialia.
67(1), 29-32.
-
Vadali, M., Ma, C., Duffie, N. A., Li, X., & Pfefferkorn, F. E.
(2012).
Pulsed laser micro polishing: Surface prediction model. Journal of Manufacturing Processes.
14(3), 307-315.
-
Guha, A., Li, H., Sun, Z., Ma, C., Werschmoeller, D., & Li, X.
(2012).
Wireless acquisition of temperature data from embedded thin film sensors in cutting insert. Journal of Manufacturing Processes.
14(3), 360-365.
-
Li, M., Miao, G., Moghadasi, M., Pei, Z., & Ma, C.
Ceramic binder jetting additive manufacturing: Relationships among powder properties, feed region density, and powder bed density. Ceramics International.
47(17), 25147-25151.
-
Moghadasi, M., Mahdaviarab, A., Hofer, A., Bermejo, R., Pei, Z., & Ma, C.
(2023).
Press-compaction-assisted binder jetting of textured ceramics. Ceramics International.
49(23), 39214-39222.
-
chapter
-
Zhao, J., Li, H., Choi, H., Ma, C., Cai, W., Abell, J. A., & Li, X.
(2017).
Transient Temperature and Heat Flux Measurement Using Thin-Film Microsensors. Cai, W. W. (Eds.),
Ultrasonic Welding of Lithium-Ion Batteries.
(pp. 55-74).
ASME International.
-
Zhao, J., Li, H., Choi, H., Ma, C., Cai, W., Abell, J. A., & Li, X.
(2017).
Transient Temperature and Heat Flux Measurement Using Thin-Film Microsensors. Cai, W. W. (Eds.),
Ultrasonic Welding of Lithium-Ion Batteries.
(pp. 55-74).
ASME International.
-
conference paper
-
Hur, B., Ma, C., Caraway, B., Roa, J., Trejos, A., & Davila, P.
(2021).
A Capstone Experience Through the Development of a Powder Compaction System During COVID-19 Pandemic
-
Hur, B., Malawey, D., Morgan, J., Ma, C., Langari, R., Jordan, J., ... James, D.
(2019).
3-D Printed Metal and Plastic Propeller Design and Manufacturing for Small-scale Underwater Thrusters
-
Miao, G., Du, W., Pei, Z., & Ma, C.
(2019).
BINDER JETTING ADDITIVE MANUFACTURING OF CERAMICS: ANALYTICAL AND NUMERICAL MODELS FOR POWDER SPREADING PROCESS
-
Du, W., Miao, G., Liu, L., Pei, Z., & Ma, C.
(2019).
BINDER JETTING ADDITIVE MANUFACTURING OF CERAMICS: COMPARISON OF FLOWABILITY AND SINTERABILITY BETWEEN RAW AND GRANULATED POWDERS
-
Du, W., Miao, G., Liu, L., Pei, Z., & Ma, C.
(2019).
BINDER JETTING ADDITIVE MANUFACTURING OF CERAMICS: FEEDSTOCK POWDER PREPARATION BY SPRAY FREEZE GRANULATION
-
Li, M., Du, W., Elwany, A., Pei, Z., & Ma, C.
(2019).
BINDER JETTING ADDITIVE MANUFACTURING OF METALS: A LITERATURE REVIEW
-
Graybill, B., Li, M., Malawey, D., Ma, C., Alvarado-Orozco, J., & Martinez-Franco, E.
(2018).
ADDITIVE MANUFACTURING OF NICKEL-BASED SUPERALLOYS. v001t01a015-v001t01a015.
-
Du, W., Ren, X., Ma, C., & Pei, Z.
(2018).
BINDER JETTING ADDITIVE MANUFACTURING OF CERAMICS: A LITERATURE REVIEW. v014t07a006-v014t07a006.
-
Diptanshu, .., Young, E., Ma, C., Obeidat, S., Pang, B. o., & Kang, N.
(2018).
CERAMIC ADDITIVE MANUFACTURING USING VAT PHOTOPOLYMERIZATION. v001t01a003-v001t01a003.
-
Du, W., Ren, X., Chen, Y., Ma, C., Radovic, M., & Pei, Z.
(2018).
MODEL GUIDED MIXING OF CERAMIC POWDERS WITH GRADED PARTICLE SIZES IN BINDER JETTING ADDITIVE MANUFACTURING. v001t01a014-v001t01a014.
-
Martinez Franco, E., Li, M., Alvarez, R. C., Gonzalez Hernandez, J., Ma, C., & Alvarado Orozco, J. M.
(2018).
NICKEL/ALUMINA METAL MATRIX NANOCOMPOSITES OBTAINED BY HIGH-ENERGY BALL MILLING AND SPARK PLASMA SINTERING. v002t04a003-v002t04a003.
-
Li, M., Ma, C., Fang, A., & Pei, Z.
(2018).
PREPARATION OF METAL NANOCOMPOSITE POWDER USING ELECTROLESS PLATING. v002t04a004-v002t04a004.
-
Xu, J., Cao, C., Das, S., Chen, L., Ma, C., Mishra, R. S., & Li, X.
(2015).
High Performance Mg6Zn Nanocomposites Fabricated Through Friction Stir Processing. Magnesium Technology -Symposium-.
383-386.
-
Ma, C., Vadali, M., Duffie, N. A., Pfefferkorn, F. E., & Li, X.
(2013).
Melt Pool Flow and Surface Evolution During Pulsed Laser Micro Polishing of Ti6Al4V. v001t01a054-v001t01a054.
-
Ma, C., Chen, L., Xu, J., Fehrenbacher, A., Li, Y., Pfefferkorn, F. E., ... Li, X.
(2012).
Biodegradability and Mechanical Performance of Hydroxyapatite Reinforced Magnesium Matrix Nanocomposite. 725-732.
-
Chen, L. Y., Choi, H., Fehrenbacher, A., Xu, J. Q., Ma, C., & Li, X. C.
(2012).
Uniform Dispersion of Nanoparticles in Metal Matrix Nanocomposites. 757-763.
-
Vadali, M., Ma, C., Duffie, N. A., Li, X., & Pfefferkorn, F. E.
(2011).
Pulsed Laser Micro Polishing: An Analytical Method for Predicting Surface Finish. 409-417.
-
Hur, B., Ma, C., Caraway, B., Roa, J., Trejos, A., & Davila, P.
(2021).
A Capstone Experience Through the Development of a Powder Compaction System During COVID-19 Pandemic
-
institutional repository document
-
Martinez Franco, E., Trejo Camacho, J., Ma, C., Daz de la Torre, S., Garca Moreno, A. I., Benitez-Castro, A. M., ... Alvarado-Orozco, J. M.
(2022).
Mechanical Characterization by Multiscale Indentation of Particle Reinforced Nickel-Alumina Metal Matrix Nanocomposites Obtained by High-Kinetic Processing of Ball Milling and Spark Plasma Sintering
-
Martinez Franco, E., Trejo Camacho, J., Ma, C., Daz de la Torre, S., Garca Moreno, A. I., Benitez-Castro, A. M., ... Alvarado-Orozco, J. M.
(2022).
Mechanical Characterization by Multiscale Indentation of Particle Reinforced Nickel-Alumina Metal Matrix Nanocomposites Obtained by High-Kinetic Processing of Ball Milling and Spark Plasma Sintering
Research
principal investigator on
co-principal investigator on
- Binder Jet Additive Manufacturing with Granulated Ceramic Powders awarded by Directorate for Engineering - (Arlington, Virginia, United States) 2018 - 2021
- Hypothesis-Driven Research on Binder Jetting Additive Manufacturing of Ceramic Joint Implants awarded by National Science Foundation - (Arlington, Virginia, United States) 2018 - 2021
investigator on
- REU Site on Cybermanufacturing awarded by National Science Foundation - (Arlington, Virginia, United States) 2018 - 2021
Teaching
teaching activities
- ENTC485 Directed Studies Instructor
- ENTC491 Hnr-research Instructor
- ENTC684 Professional Internship Instructor
- ENTC691 Research Instructor
- MEEN485 Directed Studies Instructor
- MEEN684 Professional Internship Instructor
- MEEN685 Directed Studies Instructor
- MEEN691 Research Instructor
- MMET281 Manuf & Assem Proc Ii Instructor
- MMET361 Prod Desgn & Solid Model Instructor
- MMET491 Hnr-research Instructor
- MMET691 Research Instructor
- MSEN684 Professional Internship: In-ab Instructor
- MSEN691 Research Instructor
Background
education and training
- Ph.D. in Mechanical Engineering, University of California Los Angeles - (Los Angeles, California, United States) 2015
- M.S. in Mechanical Engineering, University of Wisconsin - Madison - (Madison, Wisconsin, United States) 2012
- B.A. in Economics, Tsinghua University - (Beijing, Beijing, China) 2010
- B.E. in Mechanical Engineering, Tsinghua University - (Beijing, Beijing, China) 2010
awards and honors
Contact
first name
- Chao
has last name
- Ma
mailing address
-
Texas A&M University
Engineering Technology
3367 TAMU
College Station, TX 77843-3367
USA
Other
- cma@tamu.edu