publication venue for
- Tribological Performance Improvement of Polyamide against Steel Using Polymer Coating. 62:1051-1062. 2019
- Friction and Wear Reduction Mechanism of Polyalkylene Glycol-Based Engine Oils. 61:621-631. 2018
- In situ Investigation of the Growth of a Tribofilm Consisting of NaYF4 Fluorescent Nanoparticles. 61:503-512. 2018
- Synthesis and Tribology of Micro-Carbon Sphere Additives for Enhanced Lubrication. 58:474-480. 2015
- Extreme Pressure Lubricant Additives Interacting on the Surface of Steel- and Tungsten Carbide-Doped Diamond-Like Carbon. 56:623-629. 2013
- Tribological Performance of EP Lubricants with Phosphorus-Based Additives. 56:645-651. 2013
- Nanowear of Hafnium Diboride Thin Films. 53:731-738. 2010
- Comparison of Leakage Performance in Three Types of Gas Annular Seals Operating at a High Temperature (300 degrees C). 53:463-471. 2010
- Tribology of Hard Protective Coatings Under Realistic Operating Conditions for Use in Oilless Piston-Type and Swash-Plate Compressors. 53:319-328. 2010
- Effects of a Mechanical Preload on the Dynamic Force Response of Gas Foil Bearings: Measurements and Model Predictions. 52:569-580. 2009
- Tribological Study Comparing PAG and POE Lubricants Used in Air-Conditioning Compressors under the Presence of CO2. 51:790-797. 2008
- Experimental identification of bearing dynamic force coefficients in a flexible rotor - Further developments. 50:114-126. 2007
- Ultra high pressure tribometer for testing CO2 refrigerant at chamber pressures up to 2000 psi to simulate compressor conditions. 49:291-296. 2006
- Development of an apparatus to investigate friction characteristics of constant-velocity joints. 48:505-514. 2005
- Assessment of amorphous carbon coating for artificial joints application. 48:190-198. 2005
- Identification of journal bearing force coefficients under high dynamic loading centered static operation. 48:9-17. 2005
- Tribological studies on scuffing due to the influence of carbon dioxide used as a refrigerant in compressors. 48:336-342. 2005
- Phase transformations in silicon under dry and lubricated sliding. 45:372-380. 2002
- Sine sweep load vs. impact excitations and their influence on the damping coefficients of a bubbly oil squeeze film damper. 44:692-698. 2001
- Comparison between Theoretical Calculations and Oil Film Thickness Measurements Using the Total Capacitance Method for Crankshaft Bearings in a Firing Engine. 43:345-356. 2000
- A model for the static sealing performance of compliant metallic gas seats including surface roughness and rarefaction effects. 43:237-244. 2000
- A method for identification of bearing force coefficients and its application to a squeeze film damper with a bubbly lubricant. 42:739-746. 1999
- Identification of force coefficients from a gas annular seal - Effect of transition flow regime to turbulence. 42:487-494. 1999
- Comparison of the static friction subboundary lubrication model with experimental measurements on thin-film disks. 41:217-224. 1998
- Measurements of pressure in a squeeze film damper with an air/oil bubbly mixture. 41:282-288. 1998
- Measurements of the static load (on pad) performance and pad temperatures in a flexure-pivot tilting-pad bearing. 41:225-232. 1998
- Static sealing performance of gas mechanical seals including surface roughness and rarefaction effects. 41:531-536. 1998
- Thermohydrodynamic analysis of eccentric annular seals using cubic spline interpolations. 40:183-194. 1997
- Transient response of externally pressurized fluid film bearings. 40:147-155. 1997
- Tribological performance of diamond and diamondlike carbon films at elevated temperatures. 39:787-794. 1996
- Tribological properties of hard carbon films on zirconia ceramics. 39:735-744. 1996
- Wear and Galling of 356-T6 Aluminum-on-Steel in Low Amplitude Reciprocating Sliding in the Presence of Synthetic Lubricants in HFC-134a Atmosphere. 39:1-12. 1996
- Thermal effects in liquid oxygen hydrostatic journal bearings. 39:654-662. 1996
- DYNAMIC FORCE PERFORMANCE OF ANNULAR GAS SEALS AT OFF-CENTER CONDITIONS. 37:33-42. 1994
- Dynamic force performance of annular gas seals at off-center conditions. 37:33-42. 1994
- EFFECT OF SHAFT MISALIGNMENT ON THE DYNAMIC FORCE RESPONSE OF ANNULAR PRESSURE SEALS. 36:173-182. 1993
- MEASUREMENTS OF PRESSURE DISTRIBUTIONS AND FORCE COEFFICIENTS IN A SQUEEZE FILM DAMPER .1. FULLY OPEN-ENDED CONFIGURATION. 34:375-382. 1991
- EFFECT OF FLUID INERTIA ON FORCE COEFFICIENTS FOR THE LONG SQUEEZE FILM DAMPER. 31:370-375. 1988
- Polymeric Coatings with Superior Tribological Performance for Lightweight Materials in HFO-1234yf Refrigerant. 1-13.
- Ultrananocrystalline diamond film as a wear-resistant and protective coating for mechanical seal applications 2005
- The effect of laser texturing of steel surfaces and speed-load parameters on the transition of lubrication regime from boundary to hydrodynamic 2004
- Raman chemical Imaging of tribological surfaces 2002
- Effect of carbon coating on scuffing performance in diesel fuels 2001
- Scuffing performance of amorphous carbon during dry-sliding contact 2001
- Dry lubricant films for aluminum forming 2000
- Tribological properties of carbon coatings produced by high temperature chlorination of silicon carbide 2000
- Nano-tribological and wear behavior of boric acid solid lubricant 1999
- Friction and wear mechanisms of smooth diamond films during sliding in air and dry nitrogen 1997
- SIMULATION STUDY WITH ARBITRARY PROFILE LIQUID ANNULAR SEALS 1994