publication venue for
- Generalized Thermo-Elastodynamics for Polycrystalline Metallic Thin Films in Response to Ultrafast Laser Heating. 33:1-11. 2018
- Transonic Turbine-Vane Film Cooling with Showerhead Effect Using Pressure-Sensitive Paint Measurement Technique. 32:1-11. 2018
- Aerothermochemical Nonequilibrium Modeling for Oxygen Flows. 31:1-12. 2017
- Master Equation Study of Vibrational and Rotational Relaxations of Oxygen. 30:533-552. 2016
- Kinetic Models of Oxygen Thermochemistry Based on Quasi-Classical Trajectory Analysis. 32:1-13. 2016
- Turbine Blade Surface Phantom Cooling from Upstream Nozzle Trailing-Edge Ejection. 30:1-12. 2015
- Film Cooling for Cylindrical and Fan-Shaped Holes Using Pressure-Sensitive Paint Measurement Technique. 29:775-784. 2015
- Effect of a Turning Vane on Heat Transfer in Rotating Multipass Rectangular Smooth Channel. 28:417-427. 2014
- Heat Transfer and Friction in Rectangular Convergent and Divergent Channels with Ribs. 27:660-667. 2013
- Upstream Vortex Effects on Turbine Blade Platform Film Cooling With Typical Purge Flow. 26:75-84. 2012
- Experimental Investigation of Turbulent Heat Transfer in the Entrance Region of Microchannels. 24:388-399. 2010
- Unsteady Simulations of a Film Cooling Flow from an Inclined Cylindrical Jet. 24:145-156. 2010
- Flow Loop Experiments Using Polyalphaolefin Nanofluids. 23:752-761. 2009
- Effect of Coolant Ejection in Rectangular and Trapezoidal Trailing-Edge Cooling Passages. 23:316-326. 2009
- Heat Transfer in Trailing-Edge Channels with Slot Ejection Under High Rotation Numbers. 23:305-315. 2009
- Rib-Spacing Effect on Heat Transfer in Rectangular Channels at High Rotation Numbers. 23:294-304. 2009
- Adiabatic Two-Phase Flow in Scaled Microchannel Heat Sinks with Cross Links. 22:587-597. 2008
- Flow and Heat Transfer in a Cross-Linked Silicon Microchannel Heat Sink. 22:333-341. 2008
- Film-Cooling Prediction on Rotor Blade Leading Edge in 1-1/2 Turbine Stage. 22:201-209. 2008
- Numerical Investigation of a Radial Microchannel Heat Exchanger with Varying Cross-Sectional Channels. 22:321-332. 2008
- Unsteady Numerical Investigation of Blade Tip Leakage, Part 1: Time-Averaged Results. 22:464-473. 2008
- Unsteady Numerical Investigation of Blade Tip Leakage, Part 2: Time-Dependent Parametric Study. 22:474-484. 2008
- In-Plane Thermal Conductivity in Thin Carbon Fiber Composites. 21:460-467. 2007
- Rib Spacing Effect on Heat Transfer in Rotating Two-Pass Ribbed Channel (AR=1:2). 21:582-595. 2007
- Film Cooling Effectiveness for an Advanced-Louver Cooling Scheme for Gas Turbines. 20:754-763. 2006
- Local Heat Transfer Measurements on a Curved Microsurface Using Liquid Crystal Thermography. 20:884-894. 2006
- Film-Cooling Prediction on Turbine Blade Tip with Various Film Hole Configurations. 20:558-568. 2006
- Heat Transfer in Two-Pass Rotating Rectangular Channels (AR=2:1) with Discrete Ribs. 20:569-582. 2006
- Turbine Blade Cooling Studies at Texas A&M University: 1980-2004. 20:161-187. 2006
- Louver Cooling Scheme for Gas Turbines: Multiple Rows. 20:764-771. 2006
- Two-Phase Zero-Gravity Pressure-Drop Predictions from Single-Phase One-g Data. 19:486-496. 2005
- Jet Impingement Heat Transfer in Rotating Channels with Staggered Extraction Flow. 19:156-162. 2005
- Heat Transfer Prediction of Rotating Rectangular Channels Using Reynolds Stress Model. 19:36-47. 2005
- Heat Transfer in Rotating Rectangular Channels with V-Shaped and Angled Ribs. 19:48-56. 2005
- Flow and Heat-Transfer Computations in Rotating Rectangular Channels with V-Shaped Ribs. 18:534-547. 2004
- Effect of Rotation on Heat Transfer in Rectangular Channels with Pin-Fins. 18:263-272. 2004
- High-Temperature, Nonreacting Flowfields Generated by a Hypersonic Chemical-Laser Nozzle. 17:420-422. 2003
- Heat-transfer coefficients of a turbine blade-tip and near-tip regions. 17:297-303. 2003
- Effect of Film-Hole Shape on Turbine-Blade Film-Cooling Performance. 15:257-265. 2001
- Effect of Film-Hole Shape on Turbine-Blade Heat-Transfer Coefficient Distribution. 15:249-256. 2001
- Film Cooling Measurements on Cylindrical Models with Simulated Thermal Barrier Coating Spallation. 14:194-200. 2000
- Impingement Heat Transfer Measurements Under an Array of Inclined Jets. 14:286-288. 2000
- Impingement Heat Transfer on Dimpled Surfaces Using a Transient Liquid Crystal Technique. 14:186-193. 2000
- Temperature Measurements by Ultraviolet Filtered Rayleigh Scattering Using a Mercury Filter. 14:210-215. 2000
- Impingement Heat Transfer on a Target Plate with Film Cooling Holes. 13:522-528. 1999
- Impingement Cooling in Rotating Two-Pass Rectangular Channels with Ribbed Walls. 13:364-371. 1999
- Heat Transfer Distributions on a Cylinder with Simulated Thermal Barrier Coating Spallation. 13:76-81. 1999
- Local Heat (Mass) Transfer in a Rotating Square Channel with Ejection Holes. 12:589-595. 1998
- Heat (Mass) Transfer in a Rotating Channel with Ribs of Various Sizes on Two Walls. 12:452-454. 1998
- Detailed Heat Transfer Distributions Under an Array of Orthogonal Impinging Jets. 12:73-79. 1998
- Heat/Mass Transfer in a Rotating Two-Pass Channel with Transverse Ribs. 12:80-86. 1998
- Effect of Ribs with Holes on Heat Transfer in a Square Channel. 11:484-485. 1997
- Heat Transfer and Friction in Segmental Turbine Blade Cooling Channels. 11:486-488. 1997
- Turbulent Flow and Heat Transfer in Rotating Different Aspect Ratio Channels. 11:318-319. 1997
- Heat transfer inside and downstream of cavities using transient liquid crystal method. 10:511-516. 1996
- Simulation of turbulent heat transfer in a rotating duct. 9:381-382. 1995
- Augmented heat transfer in triangular ducts with full and partial ribbed walls. 8:574-579. 1994
- Periodically fully developed flow in channels with conducting blockages. 6:91-97. 1992
- Turbulent heat transfer in a square channel with staggered discrete ribs. 6:171-173. 1992
- Conjugate heat transfer in channels with internal longitudinal fins. 3:303-308. 1989
- Pressure drop and mass transfer in two-pass ribbed channels. 3:315-320. 1989
- Local endwall heat/mass-transfer distributions in pin fin channels. 1:365-372. 1987
- Full-Coverage Film Cooling for a Turbine Blade with Axial-Shaped Holes 2008
- Effectiveness Distributions on Turbine Blade Cascade Platforms Through Simulated Stator-Rotor Seals 2007
- Turbine Rotor with Various Tip Configurations Flow and Heat Transfer Prediction 2006
- Heat-Transfer Coefficients of a Turbine Blade-Tip and Near-Tip Regions 2003
- Effect of Film-Hole Shape on Turbine-Blade Heat-Transfer Coefficient Distribution 2001
- Near-Wall Second-Moment Closure for Rotating Multiple-Pass Cooling Channels 2000
- Impingement Cooling in Rotating Two-Pass Rectangular Channels 1998
- Effect of Rib Profiles on Turbulent Channel Flow Heat Transfer 1998