Evaluation of Almond Harvest Dust Abatement Strategies Using an Aerial Drone Particle Monitoring System
Academic Article
Overview
Research
Identity
Additional Document Info
Other
View All
Overview
abstract
This study demonstrates the feasibility of a mobile aerial drone particle monitoring system (DPMS) to measure and detect changes in harvest dust levels based on moderate adjustments to harvester settings. When compared to an earlier harvester, a new harvester operated at standard settings produced 35% fewer PM2.5s, 32% fewer PM10s, and 42% fewer TSPs. Increasing the ground speed had an adverse effect on dust mitigation, while reducing it by half only offered a slightly more favorable margin. The mutual effects of some meteorological factors were found to be slightly correlated with PM10 and TSP readings and caused significant variability in PM2.5 readings. The current findings show similar trends to PM reduction estimates of previous studies, with only a nominal difference of 10 to 15% points. Overall, the DPMS was found to perform well within an acceptable statistical confidence level. The use of DPMSs could reduce the logistical needs, complexity issues, and feedback times often experienced using the Federal Reference Method (FRM). Further investigation is needed to verify its robustness and to develop potential correlations with the FRM under different orchard location and management practices. At this stage, the current aerial DPMS should be considered a rapid screening tool not to replace the FRM, but rather to complement it in evaluating the feasibility of dust abatement strategies for the almond industry.
