Numerical Simulations of the NREL Phase VI Wind Turbine with Low-Amplitude Sinusoidal Pitch
Academic Article
Overview
Research
Identity
Additional Document Info
Other
View All
Overview
abstract
Currently, most wind turbine performance analyses and simulations are performed assuming constant pitch and yaw angles during each rotation. Nevertheless, induced vibration or rotor imbalance can affect the pitch or yaw angle within each rotation. In this study, the effects of low-amplitude sinusoidal pitch angle oscillations of the blade on the performance of a wind turbine was investigated numerically by comparing it against the baseline (without pitch variations). Large eddy simulations were performed in which the motion of blades was handled by the curvilinear immersed boundary (CURVIB) method. The grid resolution was increased near the moving immersed boundaries using dynamic overset grids to resolve rotating blades. It was found that low-amplitude (up to 3 degrees) sinusoidal oscillations in the pitch angle negligibly affected the mean torque but increased its fluctuations and created distinct features in the wake of the turbine. In fact, the turbines mean torque at wind speed of 15 m/s decreases from 1245 N.m to 1223 N.m, while its fluctuation (standard deviation) increases from 2.85 N.m to 7.94 N.m, with a dynamic pitch of 0.5 degrees and frequency of 3.6 Hz.
