A 128-Tap Highly Tunable CMOS IF Finite Impulse Response Filter for Pulsed Radar Applications Academic Article uri icon

abstract

  • © 1993-2012 IEEE. A configurable-bandwidth (BW) filter is presented in this paper for pulsed radar applications. To eliminate dispersion effects in the received waveform, a finite impulse response (FIR) topology is proposed, which has a measured standard deviation of an in-band group delay of 11 ns that is primarily dominated by the inherent, fully predictable delay introduced by the sample-and-hold. The filter operates at an IF of 20 MHz, and is tunable in BW from 1.5 to 15 MHz, which makes it optimal to be used with varying pulse widths in the radar. Employing a total of 128 taps, the FIR filter provides greater than 50-dB sharp attenuation in the stopband in order to minimize all out-of-band noise in the low signal-to-noise received radar signal. Fabricated in a 0.18-μm silicon on insulator CMOS process, the proposed filter consumes approximately 3.5 mW/tap with a 1.8-V supply. A 20-MHz two-tone measurement with 200-kHz tone separation shows IIP3 greater than 8.5 dBm.

author list (cited authors)

  • Mincey, J. S., Su, E. C., Silva-Martinez, J., & Rodenbeck, C. T.

citation count

  • 2

publication date

  • May 2018