Voltage Stability Protection and Control Using a Wide Area Network of Phasor Measurements Academic Article

abstract

• This paper presents a concept for local monitoring of the onset of voltage collapse and protective and emergency control in the presence of voltage sensitive loads. The onset of voltage collapse point is calculated based on the load characteristics and simulated voltage and current phasors measurements, which are provided by a network of phasor measurement units. If the stability margin is small and the reactive power reserves nearly exhausted, then controls to steer the power system away from the critical point will be activated.

authors

• Begovic, Miroslav

published proceedings

• IEEE Power Engineering Review

author list (cited authors)

• Milosevic, B. D., & Begovic, M.

citation count

• 7

complete list of authors

• Milosevic, Borka D||Begovic, Miroslav

publication date

• September 2002

publisher

• Institute of Electrical and Electronics Engineers (IEEE)  Publisher

published in

• IEEE Power Engineering Review  Journal

keywords

• Area Measurement
• Current Measurement
• Emergency Control
• Load Modeling
• Monitoring
• Phasor Measurement Units
• Power System Simulation
• Power System Stability
• Protection
• Protective Relaying
• Reactive Power Control
• Voltage Control
• Voltage Stability
• Voltage Stability Index
• Wide Area Networks

Digital Object Identifier (DOI)

• 10.1109/mper.2002.4312578

start page

• 57

end page

• 57

volume

• 22

issue

• 9

URL

• http://dx.doi.org/10.1109/mper.2002.4312578