publication venue for
- Effect of Mo content on the passivation and localized corrosion behavior of laser engineered net shaped (LENS) Co-Cr-Mo alloys in a simulated physiological solution. 77:103812-103812. 2023
- A comparative study of Kim-Kim-Suzuki (KKS), Partition Coefficient Relaxation (PCR), and Finite Interface Dissipation (FID) phase field models for rapid solidification. 74:103704-103704. 2023
- Overview of debinding methods for parts manufactured using powder material extrusion. 61:103335-103335. 2023
- A review on additive manufacturing of refractory tungsten and tungsten alloys. 58:103009-103009. 2022
- A literature review on powder spreading in additive manufacturing. 58:103029-103029. 2022
- Characterizing the separation behavior of photocurable PDMS on a hydrogel film during vat photopolymerization: A benchmark study. 58:103070-103070. 2022
- Investigation of thermal evolution and fluid flow in the hot-end of a material extrusion 3D Printer using melting model. 49:102502-102502. 2022
- Direct writing of continuous carbon fibers/epoxy thermoset composites with high-strength and low energy-consumption. 47:102348-102348. 2021
- An efficient framework for printability assessment in Laser Powder Bed Fusion metal additive manufacturing. 46:102018-102018. 2021
- A rigorous test and improvement of the Eagar-Tsai model for melt pool characteristics in laser powder bed fusion additive manufacturing. 47:102300-102300. 2021
- Distribution of rubber particles in the weld zone of fused filament fabricated acrylonitrile butadiene styrene and the impact on weld strength. 41:101964-101964. 2021
- Effect of composition and phase diagram features on printability and microstructure in laser powder bed fusion: Development and comparison of processing maps across alloy systems. 47:102258-102258. 2021
- Ceramic binder jetting additive manufacturing: Effects of granulation on properties of feedstock powder and printed and sintered parts. 36:101542-101542. 2020
- Effect of process parameters and electropolishing on the surface roughness of interior channels in additively manufactured nickel-titanium shape memory alloy actuators. 27:565-575. 2019
- Effects of cold plasma treatment on interlayer bonding strength in FFF process. 25:104-111. 2019
- Feasibility study of silicone stereolithography with an optically created dead zone. 29:100793-100793. 2019
- Thermal conductivity of metal powders for powder bed additive manufacturing. 21:201-208. 2018
- Bending behaviors of 3D-printed Bi-material structure: Experimental study and finite element analysis. 16:197-205. 2017
- Prediction of porosity in metal-based additive manufacturing using spatial Gaussian process models. 12:282-290. 2016
- Additive manufacturing of heat exchangers: A case study on a multi-layered Ti6Al4V oscillating heat pipe. 8:163-174. 2015
- Mechanical properties and microstructure of removable partial denture clasps manufactured using selective laser melting. 8:117-123. 2015