publication venue for
- Effect of Carbon Configuration on Mechanical, Friction and Wear Behavior of Nitrogen-Doped Diamond-Like Carbon Films for Magnetic Storage Applications. 69:151. 2021
- Tribological Interaction of Plasma-Functionalized CaCO3 Nanoparticles with Zinc and Ashless Dithiophosphate Additives. 69:49. 2021
- High Temperature Mechanics, Friction, Wear and Adhesion of Heat-Assisted Magnetic Recording. 68:109. 2020
- Tribological Performance of Graphene and PTFE Solid Lubricants for Polymer Coatings at Elevated Temperatures. 67:99. 2019
- Antiwear Properties of Binary Ashless Blend of Phosphonium Ionic Liquids and Borate Esters in Partially Formulated Oil (No Zn). 67:42. 2019
- Tribology of Selected Hard Coatings for Oil and Gas Applications Up to 450 degrees C. 67:51. 2019
- Acid Treatment of Diamond-Like Carbon Surfaces for Enhanced Adsorption of Friction Modifiers and Friction Performance. 66:128. 2018
- FEM Modeling on Scratch Behavior of Multiphase Polymeric Systems. 66:62. 2018
- High-Performance Heterocyclic Friction Modifiers for Boundary Lubrication. 66:50. 2018
- Silane Treatment of Diamond-Like Carbon: Improvement of Hydrophobicity, Oleophobicity, and Humidity Tolerance of Friction. 63:43. 2016
- Lubricant Transfer Model at the Head-Disk Interface in Magnetic Storage Considering Lubricant-Lubricant Interaction. 62:38. 2016
- Unlubricated Tribological Performance of Aromatic Thermosetting Polyester (ATSP) Coatings Under Different Temperature Conditions. 61:10. 2016
- Silver-Organic Oil Additive for High-Temperature Applications. 52:261-269. 2013
- Direct Observation of Tribochemically Assisted Wear on Diamond-Like Carbon Thin Films. 49:351-356. 2013
- An Advanced Rough Surface Continuum-Based Contact and Sliding Model in the Presence of Molecularly Thin Lubricant. 49:227-238. 2013
- An advanced rough surface continuum-based contact and sliding model in the presence of molecularly thin lubricant. 49:227-238. 2013
- Tribological Properties of Nanodiamond-Epoxy Composites. 47:195-202. 2012
- Modeling Sliding Contact of Rough Surfaces with Molecularly Thin Lubricants. 45:37-48. 2012
- Deposition and Nanotribological Characterization of Sub-100-nm Thick Protective Ti-Based Coatings for Miniature Applications. 44:213-221. 2011
- Is Ultra-Low Friction Needed to Prevent Wear of Diamond-Like Carbon (DLC)? An Alcohol Vapor Lubrication Study for Stainless Steel/DLC Interface. 42:285-291. 2011
- Modeling Bearing and Shear Forces in Molecularly Thin Lubricants. 41:573-586. 2011
- An Improved Tribological Polymer-Coating System for Metal Surfaces. 38:355-365. 2010
- Effect of Cu Content on the Structure, and Performance of Substoichiometric Cr-N Coatings. 38:57-68. 2010
- Mechanical Modeling of Scratch Behavior of Polymeric Coatings on Hard and Soft Substrates. 37:159-167. 2010
- Improved Elastic Contact Model Accounting for Asperity and Bulk Substrate Deformation. 35:191-203. 2009
- Tribological Properties of Twin Electron-Beam Evaporated Cr-N and Al-Cr-N Coatings Under Laboratory Sliding and Drill Experiments. 32:117-127. 2008
- Tribological characterization of aromatic thermosetting copolyester-PTFE blends in air conditioning compressor environment. 29:253-258. 2008
- Investigation of initial and steady-state sliding behavior of a nearly frictionless carbon film by imaging 2-and 3-D TOF-SIMS. 28:241-249. 2007
- Experimental and theoretical evaluation of friction at contacting magnetic storage slider-disk interfaces. 23:177-190. 2006
- Tribological investigation of cast iron air-conditioning compressor surfaces in CO2 refrigerant. 22:271-278. 2006
- Advantages of CO2 compared to R410a refrigerant of tribologically tested Aluminum 390-T6 surfaces. 21:185-192. 2006
- Environmental effects on the friction of hydrogenated DLC films. 21:53-58. 2006
- Tribology of unfilled and filled polymeric surfaces in refrigerant environment for compressor applications. 19:249-262. 2005
- Dry and oil-lubricated sliding wear of Si3N4 and Si3N4/BN fibrous monoliths. 18:231-237. 2005
- The tribological properties of low-friction hydrogenated diamond-like carbon measured in ultrahigh vacuum. 20:221-227. 2005
- Surface and sub-micron sub-surface evolution of Al390-T6 undergoing tribological testing under submerged lubrication conditions in the presence of CO2 refrigerant. 18:1-12. 2005
- Adhesion and friction evaluation of textured slider surfaces in ultra-low flying head-disk interfaces. 17:739-749. 2004
- Solid lubricant coatings: recent developments and future trends. 17:389-397. 2004
- Effect of molecularly thin lubricant on roughness and adhesion of magnetic disks intended for extremely high-density recording. 15:365-376. 2003
- Effect of humidity on the tribological properties of carbide-derived carbon (CDC) films on silicon carbide. 15:51-55. 2003
- A crystal-chemical approach to lubrication by solid oxides. 8:97-102. 2000
- Adhesion and wear of colloidal silica probed by force microscopy. 7:121-128. 1999
- Effect of niobium interlayer on high-temperature sliding friction and wear of silver films on alumina. 2:23-36. 1996