publication venue for
- Impacts of particles released from vehicles on environment and health. 184:108417-108417. 2023
- Tribological studies of a novel high-performance aromatic thermosetting copolyester containing carbon nanotubes for artificial hip joints. 178:108038-108038. 2023
- Review of dental tribology: Current status and challenges. 166:107354-107354. 2022
- Dynamic tribo-pair of PS400 and DLC for planet Venus application. 164:107237-107237. 2021
- Power loss reduction for tilt pad journal bearings utilizing pad pockets and steps. 159:106993-106993. 2021
- Direct observation of partial interface slip in micrometre-scale single asperity contacts. 155:106776-106776. 2021
- Extreme environment tribological study of advanced bearing polymers for space applications. 153:106634-106634. 2021
- Tribological behavior of PS400-related tribopairs for space exploration. 153:106636-106636. 2021
- Stribeck performance of drilling fluids for oil and gas drilling at elevated temperatures. 151:106502-106502. 2020
- Effect of surface microtexturing on seawater-lubricated contacts under starved and fully-flooded conditions. 148:106339-106339. 2020
- Auxiliary bearing squeeze film dampers for magnetic bearing supported rotors. 146:106181-106181. 2020
- Learning acoustic emission signatures from a nanoindentation-based lithography process: Towards rapid microstructure characterization. 143:106074-106074. 2020
- Thermal effect on the tribo-mechanical behavior of natural fiber composites at micro-scale. 149:105831-105831. 2020
- The effect of lubricant additives on the tribological performance of oil and gas drilling applications up to 200 degrees C. 141:105896-105896. 2020
- Gas labyrinth seals: On the effect of clearance and operating conditions on wall friction factors - A CFD investigation. 131:363-376. 2019
- The impact of tribology on energy use and CO2 emission globally and in combustion engine and electric cars. 135:389-396. 2019
- Tribology review of blended bulk polymers and their coatings for high-load bearing applications. 129:92-111. 2019
- Elevated temperature tribology of Ni alloys under helium environment for nuclear reactor applications. 123:372-384. 2018
- Tilting pad gas bearing induced thermal bow- rotor instability (Morton effect). 121:269-279. 2018
- High temperature and high pressure tribological experiments of advanced polymeric coatings in the presence of drilling mud for oil & gas applications. 120:218-225. 2018
- A phenomenological elevated temperature friction model for viscoelastic polymer coatings based on nanoindentation. 119:299-307. 2018
- Multiscale tribo-mechanical analysis of natural fiber composites for manufacturing applications. 122:143-150. 2018
- Tribological performance of selective laser melted 316L stainless steel. 128:121-129. 2018
- Global energy consumption due to friction and wear in the mining industry. 115:116-139. 2017
- Operando formation of an ultra-low friction boundary film from synthetic magnesium silicon hydroxide additive. 110:35-40. 2017
- Normal impact of sand particles with solar panel glass surfaces. 102:237-248. 2016
- Tribological interactions of advanced polymeric coatings with polyalkylene glycol lubricant and r1234yf refrigerant. 97:200-211. 2016
- Effect of thermal history on scratch behavior of multi-phase styrenic-based copolymers. 99:248-257. 2016
- Experimental and FEM analysis of scratch behavior on polypropylene thin films: Effect of film orientation and ethylene monomer content. 103:412-422. 2016
- Fatigue resistant carbon coatings for rolling/sliding contacts. 98:172-178. 2016
- An analytical study Of tribofilms generated by the interaction of ashless antiwear additives with ZDDP using XANES and nano-indentation. 82:43-57. 2015
- Fretting experiments of advanced polymeric coatings and the effect of transfer films on their tribological behavior. 79:16-25. 2014
- Tribological performance comparing different refrigerant-lubricant systems: The case of environmentally friendly HFO-1234yf refrigerant. 78:176-186. 2014
- Force coefficients for a large clearance open ends squeeze film damper with a central feed groove: Experiments and predictions. 71:17-25. 2014
- Effect of moisture exposure on scratch resistance of PMMA. 69:46-51. 2014
- Global energy consumption due to friction in trucks and buses. 78:94-114. 2014
- Micromechanical properties of polymeric coatings. 60:198-208. 2013
- Friction characteristics of microtextured surfaces under mixed and hydrodynamic lubrication. 57:170-176. 2013
- Lubricity of environmentally friendly HFO-1234yf refrigerant. 57:92-100. 2013
- Measurements of tangential stiffness and damping of mechanical joints: Direct versus indirect contact resonance methods. 50:35-44. 2012
- Global energy consumption due to friction in passenger cars. 47:221-234. 2012
- Tribological properties of femur-tibia articulation of lubber grasshopper. 50:76-81. 2012
- Influence of surface topography on frictional properties of Cu surfaces under different lubrication conditions: Comparison of dry, base oil, and ZnS nanowire-based lubrication system. 44:1720-1725. 2011
- Tribological studies of unpolished laser surface textures under starved lubrication conditions for use in air-conditioning and refrigeration compressors. 44:1890-1901. 2011
- Contrast-based evaluation of mar resistance of thermoplastic olefins. 44:1024-1031. 2011
- Scratch resistance of high performance polymers. 44:1032-1046. 2011
- Flash temperature during impact of layered elastic solids. 43:1768-1772. 2010
- Effect of asperity interactions on rough surface elastic contact behavior: Hard film on soft substrate. 43:1438-1448. 2010
- A phenomenological friction model of tripod constant velocity (CV) joints. 43:844-858. 2010
- Thermomechanical finite element analysis of slider-disk impact in magnetic storage thin film disks. 43:737-745. 2010
- A phenomenological model of polishing of silicon with diamond abrasive. 43:100-107. 2010
- Analysis of gas foil bearings integrating FE top foil models. 42:111-120. 2009
- Forced nonlinear response of gas foil bearing supported rotors. 41:704-715. 2008
- Comparative tribological behaviors of TiN-, CrN- and MoN-Cu nanocomposite coatings. 41:49-59. 2008
- Effects of molecular weight and thermal history on scratch behavior of polypropylene thin sheets. 41:425-433. 2008
- Analysis of advanced gas foil bearings with piecewise linear elastic supports. 40:1239-1245. 2007
- Special issue: Interactions of Tribology and the Operating Environment: Proceedings of the 32nd Leeds-Lyon Symposium on Tribology (Lyon, 2005) - Discussion. 39:I-VII. 2006
- The effect of laser surface texturing on transitions in lubrication regimes during unidirectional sliding contact. 38:219-225. 2005
- Modeling the effect of skewness and kurtosis on the static friction coefficient of rough surfaces. 37:491-505. 2004
- Design criteria for superlubricity in carbon films and related microstructures. 37:577-583. 2004
- Genesis of superlow friction and wear in diamondlike carbon films. 37:1005-1012. 2004
- Investigation of mechanical and tribological properties of amorphous diamond-like carbon coatings. 30:591-598. 1997
- Tribology and surface engineering at Argonne National Laboratory. 29:263-264. 1996
- Effect of hard-disk drive spindle motor vibration on dynamic microwaviness and flying-height modulation 2005
- Review of engineered tribological interfaces for improved boundary lubrication 2005