publication venue for
- Dissolution and early hydration of tricalcium aluminate in aqueous sulfate solutions. 137:106191-106191. 2020
- In situ nano-scale observation of C(3)A dissolution in water. 132:106044-106044. 2020
- Dissolution and initial hydration behavior of tricalcium aluminate in low activity sulfate solutions. 130:105989-105989. 2020
- Temperature dependence of gypsum dissolution rates. 129:105969-105969. 2020
- Dissolution rate spectra of beta-dicalcium silicate in water of varying activity. 118:69-83. 2019
- Mechanisms of dimensional instability caused by differential drying in wet cured cement paste. 79:151-158. 2017
- The theoretical maximum achievable dispersion of nanoinclusions in cement paste. 42:798-804. 2017
- Direct Measurements of 3D Structure, Chemistry and Mass Density During the Induction Period of C3S Hydration.. 89:14-26. 2016
- Direct three-dimensional observation of the microstructure and chemistry of C3S hydration.. 88:157-169. 2016
- Time dependent driving forces and the kinetics of tricalcium silicate hydration. 74:26-34. 2015
- New insights into the prehydration of cement and its mitigation. 70:94-103. 2015
- A poromechanical model of freezing concrete to elucidate damage mechanisms associated with substandard aggregates. 88-101. 2014
- Mechanisms of cement hydration. 41:1208-1223. 2011
- Modeling and simulation of cement hydration kinetics and microstructure development. 41:1257-1278. 2011
- Why alite stops hydrating below 80% relative humidity. 41:987-992. 2011
- From electrons to infrastructure: Engineering concrete from the bottom up. 41:727-735. 2011
- Desiccation shrinkage of cementitious materials as an aging, poroviscoelastic response. 41:77-89. 2011
- Correlation of hollow and solid cylinder dynamic pressurization tests for measuring permeability. 345-352. 2009
- Analysis of CCRL proficiency cements 151 and 152 using the virtual cement and concrete testing laboratory (vol 8, pg 1548, 2006). 37:291-292. 2007
- Analysis of CCRL proficiency cements 151 and 152 using the virtual cement and concrete testing laboratory. 36:1548-1555. 2006
- 3D surface image analysis for fracture modeling of cement-based materials. 36:1098-1107. 2006
- A model investigation of the influence of particle shape on portland cement hydration. 36:1007-1015. 2006
- Modeling the linear elastic properties of Portland cement paste. 35:1948-1960. 2005
- Shape analysis of a reference cement. 34:1933-1937. 2004
- Evaluation of modified ASTM C 1260 accelerated mortar bar test for alkalisilica reactivity. 1981-1987. 2002
- Investigation of the physicochemical characteristics of ancient mortars by static and dynamic studies. 30:1151-1155. 2000
- Mineralogical alterations that affect the durability and metals containment of aged solidified and stabilized wastes. 1433-1440. 1999
- Prediction of chemical speciation in stabilized solidified wastes using a general chemical equilibrium model II: Doped waste contaminants in cement porewaters. 99-105. 1999
- Prediction of chemical speciation in stabilized solidified wastes using a general chemical equilibrium model Part I. Chemical representation of cementitious binders. 361-368. 1999
- Microstructural investigation of severe distress in a crushed concrete base. 28:401-410. 1998
- On the relationship between the formation factor and propan-2-ol diffusivity in mortars - Discussion. 963-964. 1997
- AN ELECTRICAL-CONDUCTIVITY METHOD FOR MEASURING THE EFFECTS OF ADDITIVES ON EFFECTIVE DIFFUSIVITIES IN PORTLAND-CEMENT PASTES. 752-764. 1994