HR job title
- Professor and Head
- Contact Info
- 1 979 862 3923
- ORCiD
- 0000-0001-6461-4958
Karaman, Ibrahim Professor and Head
Positions
- Professor and Head, Materials Science and Engineering, College of Engineering
- Faculty Affiliate, Energy Institute, Texas A&M Engineering Experiment Station (TEES)
- Overview
- Publications
- Research
- Teaching
- Works By Students
- Background
- Contact
- Other
- View All
Overview
Publications
selected publications
-
academic article
-
Demblon, A., Mabe, J. H., & Karaman, I.
(2024).
Compositional effects on strain-controlled actuation fatigue of NiTiHf high temperature shape memory alloys. Scripta Materialia.
242.
-
Lago, J. C., Cho, W., Salas, D., Karaman, I., & Shamberger, P. J.
(2024).
Insensitivity of nucleation rate to order-disorder interfaces in reversible thermoelastic martensitic transformations. Physical Review Materials.
8(1), 014411.
-
Vela, B., Khatamsaz, D., Acemi, C., Karaman, I., & Arroyave, R.
(2023).
Data-augmented modeling for yield strength of refractory high entropy alloys: A Bayesian approach. ACTA MATERIALIA.
261, 119351-119351.
-
Trehern, W., Hite, N., Ortiz-Ayala, R., Atli, K. C., Sharar, D. J., Wilson, A. A., ... Karaman, I.
(2023).
NiTiCu shape memory alloys with ultra-low phase transformation range as solid-state phase change materials. ACTA MATERIALIA.
260, 119310-119310.
-
Demblon, A., Mabe, J. H., & Karaman, I.
(2023).
Order of magnitude increase in actuation fatigue lifetime through partial austenitic transformation of NiTiHf high-temperature shape memory alloys. Materials Science & Engineering: A.
887, 145717-145717.
-
Picak, S., Singh, P., Salas, D., Tunes, M. A., Fang, X., Zhou, L., ... Karaman, I.
(2023).
Orientation dependence of the effect of short-range ordering on the plastic deformation of a medium entropy alloy. Materials Science & Engineering: A.
888, 145309-145309.
-
Morcos, P., Shoukr, D., Sundermann, T., Dobrowolski, T., Barta, N., Jain, J. R., ... Elwany, A.
(2023).
An all-encompassing study on the joint effect of powder feedstock characteristics and manufacturing process parameters on the densification and mechanical properties of additively manufactured nickel alloy 718. 78, 103828-103828.
-
Shoukr, D., Morcos, P., Sundermann, T., Dobrowolski, T., Yates, C., Jain, J. R., ... Elwany, A.
(2023).
Influence of layer thickness on the printability of nickel alloy 718: A systematic process optimization framework. 73, 103646-103646.
-
Seede, R., Whitt, A., Ye, J., Gibbons, S., Flater, P., Gaskey, B., ... Karaman, I.
(2023).
A lightweight Fe-Mn-Al-C austenitic steel with ultra-high strength and ductility fabricated via laser powder bed fusion. 874, 145007-145007.
-
Timofeeva, E. E., Panchenko, E. Y., Eftifeeva, A. S., Tagiltsev, A. I., Surikov, N. Y., Tokhmetova, A. B., ... Chumlyakov, Y. I.
(2023).
Cyclic Stability of Superelasticity in [001]-Oriented Quenched Ni44Fe19Ga27Co10 and Ni39Fe19Ga27Co15 Single Crystals. Acta Metallurgica Sinica (English Letters).
36(4), 650-660.
-
Vela, B., Acemi, C., Singh, P., Kirk, T., Trehern, W., Norris, E., ... Arroyave, R.
(2023).
High-throughput exploration of the WMoVTaNbAl refractory multi-principal-element alloys under multiple-property constraints. ACTA MATERIALIA.
248, 118784-118784.
-
Ranaiefar, M., Honarmandi, P., Ye, J., Zhang, C., Xue, L., Elwany, A., ... Arroyave, R.
(2023).
Uncertainty quantification and propagation across a multi-model computational framework for the tailored design of additively manufactured shape memory alloys. 68, 103506-103506.
-
Picak, S., Vaughan, M. W., El Atwani, O., Mott, A., Limmer, K. R., & Karaman, I.
(2023).
Effects of chemical segregation on ductility-anisotropy in high strength Fe-Mn-Al-C lightweight austenitic steels. ACTA MATERIALIA.
245, 118589-118589.
-
Ozcan, H., Salas, D., Ma, J. i., Ren, Y., Chumlyakov, Y. I., & Karaman, I.
(2023).
Massive reorientations of bulk single and oligocrystals via solid state processing. ACTA MATERIALIA.
242, 118465-118465.
-
Timofeeva, E. E., Panchenko, E. Y., Zherdeva, M. V., Tokhmetova, A. B., Surikov, N. Y., Chumlyakov, Y. I., & Karaman, I.
(2022).
The Effect of Thermal Treatment on Microstructure and Thermal-Induced Martensitic Transformations in Ni44Fe19Ga27Co10 Single Crystals. Metals.
12(11), 1960-1960.
-
Talignani, A., Seede, R., Whitt, A., Zheng, S., Ye, J., Karaman, I., ... Wang, Y. M.
(2022).
A review on additive manufacturing of refractory tungsten and tungsten alloys. ADDITIVE MANUFACTURING.
58, 103009-103009.
-
Dong, J., Umale, T., Young, B., Karaman, I., & Xie, K. Y.
(2022).
Structure and substructure characterization of solution-treated Ni50.3Ti29.7Hf20 high-temperature shape memory alloy. 219, 114888-114888.
-
AbdelGawad, M., Usman, C. A., Shunmugasamy, V. C., Karaman, I., & Mansoor, B.
(2022).
Corrosion behavior of Mg-Zn-Zr-RE alloys under physiological environment - Impact on mechanical integrity and biocompatibility. Journal of Magnesium and Alloys.
10(6), 1542-1572.
-
Joy, J. K., Umale, T., Zhao, D., Solomou, A., Xie, K., Karaman, I., & Lagoudas, D. C.
(2022).
Effects of microstructure and composition on constitutive response of high temperature shape memory alloys: Micromechanical modeling using 3-D reconstructions with experimental validation. 232, 117929-117929.
-
Jozaghi, T., Samimi, P., Chumlyakov, Y., & Karaman, I.
(2022).
Role of thermally-stable deformation twins on the high-temperature mechanical response of an austenitic stainless steel. Materials Science & Engineering: A.
845, 143199-143199.
-
Cho, W., Salas, D., Barta, N., & Karaman, I.
(2022).
Engineering thermal hysteresis of ferromagnetic shape memory alloy sensory particles. Scripta Materialia.
213, 114619-114619.
-
Trehern, W., Ortiz-Ayala, R., Atli, K. C., Arroyave, R., & Karaman, I.
(2022).
Data-driven shape memory alloy discovery using Artificial Intelligence Materials Selection (AIMS) framework. 228, 117751-117751.
-
Ye, J., Mahmoudi, M., Karayagiz, K., Johnson, L., Seede, R., Karaman, I., Arroyave, R., & Elwany, A.
(2022).
Bayesian Calibration of Multiple Coupled Simulation Models for Metal Additive Manufacturing: A Bayesian Network Approach. ASCE - ASME Journal of Risk and Uncertainty in Engineering Systems, Part B. Mechanical Engineering.
8(1),
-
Demblon, A., Karakoc, O., Sam, J., Zhao, D., Atli, K. C., Mabe, J. H., & Karaman, I.
(2022).
Compositional and microstructural sensitivity of the actuation fatigue response in NiTiHf high temperature shape memory alloys. Materials Science & Engineering: A.
838, 142786-142786.
-
Timofeeva, E. E., Panchenko, E. Y., Zherdeva, M. V., Chumlyakov, Y. I., & Karaman, I.
(2022).
Thermal- and stress-induced martensitic transformations in [001]-oriented Ni44Fe19Ga27Co10 single crystals. Materials Letters.
310, 131477-131477.
-
Trehern, W., Ozcan, H., Franco, B., Hite, N., Malone, N., Loveall, B., ... Karaman, I.
(2022).
Exploring thermomechanical functionality of CuAlMn as an extreme low temperature shape memory alloy. Materials Letters.
308, 131246-131246.
-
Xue, L., Atli, K. C., Zhang, C., Hite, N., Srivastava, A., Leff, A. C., ... Karaman, I.
(2022).
Laser Powder Bed Fusion of Defect-Free NiTi Shape Memory Alloy Parts with Superior Tensile Superelasticity. ACTA MATERIALIA.
229, 117781-117781.
-
Karakoc, O., Atli, K. C., Benafan, O., Noebe, R. D., & Karaman, I.
(2022).
Actuation fatigue performance of NiTiZr and comparison to NiTiHf high temperature shape memory alloys. Materials Science & Engineering: A.
829, 142154-142154.
-
Makkar, J., Young, B., Karaman, I., & Baxevanis, T.
(2021).
Fracture resistance of shape memory alloys under thermomechanical loading. Engineering Fracture Mechanics.
258, 108059-108059.
-
Seede, R., Zhang, B., Whitt, A., Picak, S., Gibbons, S., Flater, P., ... Karaman, I.
(2021).
Effect of heat treatments on the microstructure and mechanical properties of an ultra-high strength martensitic steel fabricated via laser powder bed fusion additive manufacturing. 47, 102255-102255.
-
West, P., Shunmugasamy, V. C., Usman, C. A., Karaman, I., & Mansoor, B.
(2021).
Part I.: Friction stir welding of equiatomic nickel titanium shape memory alloy - microstructure, mechanical and corrosion behavior. 4, 100071-100071.
-
Tagiltsev, A. I., Panchenko, E. Y., Timofeeva, E. E., Chumlyakov, Y. I., Marchenko, E. S., & Karaman, I.
(2021).
The Effect of Subsequent Stress-Induced Martensite Aging on the Viscoelastic Properties of Aged NiTiHf Polycrystals. Metals.
11(12), 1890-1890.
-
Zhang, B., Seede, R., Whitt, A., Shoukr, D., Huang, X., Karaman, I., Arroyave, R., & Elwany, A.
(2021).
A printability assessment framework for fabricating low variability nickel-niobium parts using laser powder bed fusion additive manufacturing. Rapid Prototyping Journal.
27(9), 1737-1748.
-
Zhang, B., Seede, R., Xue, L., Atli, K. C., Zhang, C., Whitt, A., ... Elwany, A.
(2021).
An efficient framework for printability assessment in Laser Powder Bed Fusion metal additive manufacturing. ADDITIVE MANUFACTURING.
46, 102018-102018.
-
Hite, N., Sharar, D. J., Trehern, W., Umale, T., Atli, K. C., Wilson, A. A., Leff, A. C., & Karaman, I.
(2021).
NiTiHf shape memory alloys as phase change thermal storage materials. ACTA MATERIALIA.
218, 117175-117175.
-
Xu, S., Pons, J., Santamarta, R., Karaman, I., Benafan, O., & Noebe, R. D.
(2021).
Strain glass state in Ni-rich Ni-Ti-Zr shape memory alloys. ACTA MATERIALIA.
218, 117232-117232.
-
Singh, P., Picak, S., Sharma, A., Chumlyakov, Y. I., Arroyave, R., Karaman, I., & Johnson, D. D.
(2021).
Martensitic Transformation in Fe_{x}Mn_{80-x}Co_{10}Cr_{10} High-Entropy Alloy. Physical Review Letters.
127(11), 115704.
-
Haghgouyan, B., Young, B., Picak, S., Baxevanis, T., Karaman, I., & Lagoudas, D. C.
(2021).
A unified description of mechanical and actuation fatigue crack growth in shape memory alloys. 217, 117155-117155.
-
Picak, S., Yilmaz, H. C., & Karaman, I.
(2021).
Simultaneous deformation twinning and martensitic transformation in CoCrFeMnNi high entropy alloy at high temperatures. Scripta Materialia.
202, 113995-113995.
-
Tam, K. J., Vaughan, M. W., Shen, L., Knezevic, M., Karaman, I., & Proust, G.
(2021).
Modelling dynamic recrystallisation in magnesium alloy AZ31. International journal of plasticity.
142, 102995-102995.
-
Jape, S., Young, B., Haghgouyan, B., Hayrettin, C., Baxevanis, T., Lagoudas, D. C., & Karaman, I.
(2021).
Actuation-Induced stable crack growth in near-equiatomic nickel-titanium shape memory alloys: Experimental and numerical analysis. 221, 165-179.
-
Gehring, D., Ren, Y., Barghouti, Z., & Karaman, I.
(2021).
In-situ investigation of anisotropic crystalline and bulk negative thermal expansion in titanium alloys. ACTA MATERIALIA.
210, 116847-116847.
-
Zhao, D., Ma, X., Srivastava, A., Turner, G., Karaman, I., & Xie, K. Y.
(2021).
Significant disparity of non-basal dislocation activities in hot-rolled highly-textured Mg and Mg-3Al-1Zn alloy under tension. ACTA MATERIALIA.
207, 116691-116691.
-
Salas, D., Wang, Y., Duong, T. C., Attari, V., Ren, Y., Chumlyakov, Y., Arroyave, R., & Karaman, I.
(2021).
Competing Interactions between Mesoscale Length-Scales, Order-Disorder, and Martensitic Transformation in Ferromagnetic Shape Memory Alloys. ACTA MATERIALIA.
206, 116616-116616.
-
Abut, B., Haghgouyan, B., Karaman, I., & Lagoudas, D. C.
(2021).
Effect of Specimen Thickness on the Fracture Toughness of a NiTi Shape Memory Alloy. 7(1), 90-100.
-
Baxevanis, T., Lagoudas, D. C., & Karaman, I.
(2021).
Special Issue Focus Mechanics and Physics of Active Materials and Systems. 7(1), 5-6.
-
Atli, K. C., Boon, H. M., Seede, R., Zhang, B., Elwany, A., Arroyave, R., & Karaman, I.
(2021).
Laser-based additive manufacturing of a binary Ni-5 wt.%Nb alloy. 62, 720-728.
-
Zhang, Y., Lago, C., Karaman, I., & Shamberger, P. J.
(2021).
Nucleation site potency distributions in thermoelastic martensitic transformation in Ni43Co7Mn39Sn11 particles. Physical Review Materials.
5(2), 023401.
-
Picak, S., Wegener, T., Sajadifar, S. V., Sobrero, C., Richter, J., Kim, H., Niendorf, T., & Karaman, I.
(2021).
On the low-cycle fatigue response of CoCrNiFeMn high entropy alloy with ultra-fine grain structure. ACTA MATERIALIA.
205, 116540-116540.
-
Tagiltsev, A. I., Panchenko, E. Y., Timofeeva, E. E., Chumlyakov, Y. I., Fatkullin, I. D., Marchenko, E. S., & Karaman, I.
(2021).
The effect of stress-induced martensite aging in tension and compression on B2-B19 ' martensitic transformation in Ni50.3Ti32.2Hf17.5 high-temperature shape memory alloy. Smart Materials and Structures.
30(2), 025039-025039.
-
Xue, L., Atli, K. C., Picak, S., Zhang, C., Zhang, B., Elwany, A., Arroyave, R., & Karaman, I.
(2021).
Controlling martensitic transformation characteristics in defect-free NiTi shape memory alloys fabricated using laser powder bed fusion and a process optimization framework. ACTA MATERIALIA.
215, 117017-117017.
-
Seede, R., Ye, J., Whitt, A., Trehern, W., Elwany, A., Arroyave, R., & Karaman, I.
(2021).
Effect of composition and phase diagram features on printability and microstructure in laser powder bed fusion: Development and comparison of processing maps across alloy systems. ADDITIVE MANUFACTURING.
47, 102258-102258.
-
Makkar, J., Young, B., Karaman, I., & Baxevanis, T.
(2021).
Experimental observations of "reversible" transformation toughening. 191, 81-85.
-
Barta, N. E., Fincher, C., Bolon, A. M., Attari, V., Higgins, W., Arroyave, R., ... Karaman, I.
(2021).
Fabrication and characterization of aluminum - magnetic shape memory alloy composites. Materials Science & Engineering: A.
805.
-
Karakoc, O., Atli, K. C., Evirgen, A., Pons, J., Santamarta, R., Benafan, O., Noebe, R. D., & Karaman, I.
(2020).
Effects of training on the thermomechanical behavior of NiTiHf and NiTiZr high temperature shape memory alloys. Materials Science & Engineering: A.
794, 139857-139857.
-
Cubides, Y., Karayan, A. I., Vaughan, M. W., Karaman, I., & Castaneda, H.
(2020).
Enhanced mechanical properties and corrosion resistance of a fine-grained Mg-9Al-1Zn alloy: the role of bimodal grain structure and beta-Mg17Al12 precipitates. Materialia.
13, 100840-100840.
-
Gehring, D., & Karaman, I.
(2020).
Evolution of anisotropic and negative thermal expansion in rolled equiatomic nickel-titanium martensite. Scripta Materialia.
186, 142-146.
-
Tam, K. J., Vaughan, M. W., Shen, L., Knezevic, M., Karaman, I., & Proust, G.
(2020).
Modelling the temperature and texture effects on the deformation mechanisms of magnesium alloy AZ31. International Journal of Mechanical Sciences.
182, 105727-105727.
-
Kobaissy, A., Ayoub, G., Nasim, W., Malik, J., Karaman, I., & Shehadeh, M.
(2020).
Modeling of the ECAP Induced Strain Hardening Behavior in FCC Metals. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.
51(10), 5453-5474.
-
Vaughan, M. W., Samimi, P., Gibbons, S. L., Abrahams, R. A., Harris, R. C., Barber, R. E., & Karaman, I.
(2020).
Exploring performance limits of a new martensitic high strength steel by ausforming via equal channel angular pressing. Scripta Materialia.
184, 63-69.
-
Ghosh, S., Seede, R., James, J., Karaman, I., Elwany, A., Allaire, D., & Arroyave, R.
(2020).
Statistical modelling of microsegregation in laser powder-bed fusion. Philosophical Magazine Letters: structure and properties of condensed matter.
100(6), 271-282.
-
Tagiltsev, A. I., Panchenko, E. Y., Chumlyakov, Y. I., Fatkullin, I. D., & Karaman, I.
(2020).
Two-way shape memory effect in stress-induced martensite aged Ni50.3Ti32.2Hf17.5 alloy. Materials Letters.
268, 127589-127589.
-
Kireeva, I. V., Chumlyakov, Y. I., Vyrodova, A. V., Pobedennaya, Z. V., & Karaman, I.
(2020).
Effect of twinning on the orientation dependence of mechanical behaviour and fracture in single crystals of the equiatomic CoCrFeMnNi high-entropy alloy at 77K. Materials Science & Engineering: A.
784, 139315-139315.
-
Zhao, D., Ma, X., Picak, S., Karaman, I., & Xie, K.
(2020).
Activation and suppression of c plus a dislocations in a textured Mg-3Al-1Zn alloy. 179, 49-54.
-
Seede, R., Shoukr, D., Zhang, B., Whitt, A., Gibbons, S., Flater, P., ... Karaman, I.
(2020).
An ultra-high strength martensitic steel fabricated using selective laser melting additive manufacturing: Densification, microstructure, and mechanical properties. ACTA MATERIALIA.
186, 199-214.
-
Gehring, D., Monroe, J. A., & Karaman, I.
(2020).
Effects of composition on the mechanical properties and negative thermal expansion in martensitic TiNb alloys. Scripta Materialia.
178, 351-355.
-
Karayagiz, K., Johnson, L., Seede, R., Attari, V., Zhang, B., Huang, X., ... Arroyave, R.
(2020).
Finite interface dissipation phase field modeling of Ni-Nb under additive manufacturing conditions. ACTA MATERIALIA.
185, 320-339.
-
Jozaghi, T., Wang, C., Arroyave, R., & Karaman, I.
(2020).
Design of alumina-forming austenitic stainless steel using genetic algorithms. Materials and Design.
186, 108198-108198.
-
Picak, S., Liu, J., Hayrettin, C., Nasim, W., Canadinc, D., Xie, K., ... Karaman, I.
(2019).
Anomalous work hardening behavior of Fe40Mn40Cr10Co10 high entropy alloy single crystals deformed by twinning and slip. 181, 555-569.
-
Young, B., Haghgouyan, B., Lagoudas, D. C., & Karaman, I.
(2019).
Effect of Temperature on the Fracture Toughness of a NiTiHf High Temperature Shape Memory Alloy. 5(4), 362-373.
-
Karakoc, O., Hayrettin, C., Evirgen, A., Santamarta, R., Canadinc, D., Wheeler, R. W., ... Karaman, I.
(2019).
Role of microstructure on the actuation fatigue performance of Ni-Rich NiTiHf high temperature shape memory alloys. ACTA MATERIALIA.
175, 107-120.
-
Atli, K. C., Johnson, L., Ranaiefar, M., Arroyave, R., Karaman, I., & Elwany, A.
(2019).
4D PRINTING OF METALLIC FUNCTIONAL MATERIALS. Advanced Materials and Processes.
177(5), 16-21.
-
Haghgouyan, B., Jape, S., Baxevanis, T., Karaman, I., & Lagoudas, D. C.
(2019).
Stable crack growth in NiTi shape memory alloys: 3D finite element modeling and experimental validation. Smart Materials and Structures.
28(6), 064001-064001.
-
Vaughan, M. W., Nasim, W., Dogan, E., Herrington, J. S., Proust, G., Benzerga, A. A., & Karaman, I.
(2019).
Interplay between the effects of deformation mechanisms and dynamic recrystallization on the failure of Mg-3Al-1Zn. 168, 448-472.
-
Barta, N. E., & Karaman, I.
(2019).
Embedded magnetic shape memory sensory particles in lightweight composites for crack detection. Materials Science & Engineering: A.
751, 201-213.
-
Emre, B., Yuce, S., Bruno, N. M., & Karaman, I.
(2019).
Martensitic transformation and magnetocaloric properties of NiCoMnSn magnetic shape memory alloys. Intermetallics.
106, 65-70.
-
Umale, T., Salas, D., Tomes, B., Arroyave, R., & Karaman, I.
(2019).
The effects of wide range of compositional changes on the martensitic transformation characteristics of NiTiHf shape memory alloys. Scripta Materialia.
161, 78-83.
-
Samy, N. M., Bolgar, M. K., Barta, N., Daroczi, L., Toth, L. Z., Chumlyakov, Y. I., Karaman, I., & Beke, D. L.
(2019).
Thermal, acoustic and magnetic noises emitted during martensitic transformation in single crystalline Ni45Co5Mn36.6In13.4 meta-magnetic shape memory alloy. Journal of Alloys and Compounds.
778, 669-680.
-
Karayagiz, K., Elwany, A., Tapia, G., Franco, B., Johnson, L., Ma, J. i., Karaman, I., & Arroyave, R.
(2019).
Numerical and experimental analysis of heat distribution in the laser powder bed fusion of Ti-6Al-4V. IISE TRANSACTIONS.
51(2), 136-152.
-
Johnson, L., Mahmoudi, M., Zhang, B., Seede, R., Huang, X., Maier, J. T., ... Arroyave, R.
(2019).
Assessing printability maps in additive manufacturing of metal alloys. ACTA MATERIALIA.
176, 199-210.
-
Salas, D., Eliseeva, O., Wang, Y., Duong, T., Chumlyakov, Y. I., Ren, Y., Arroyave, R., & Karaman, I.
(2019).
Effects of composition and crystallographic ordering on the ferromagnetic transition in Ni-Co-Mn-In magnetic shape memory alloys. ACTA MATERIALIA.
166, 630-637.
-
Lin, W., Franco, B. E., Karaman, I., Elwany, A., & Ma, J. i.
(2019).
Evolution of mechanical behavior of magnesium alloy infiltrated 3D-printed CoCr scaffolds under corrosion in simulated body fluid. Materials Science and Engineering C: Materials for Biological Applications.
105, 109747-109747.
-
Eliseeva, O. V., Kirk, T., Samimi, P., Malak, R., Arroyave, R., Elwany, A., & Karaman, I.
(2019).
Functionally Graded Materials through robotics-inspired path planning. Materials and Design.
182, 107975-107975.
-
Wang, Y., Salas, D., Duong, T. C., Medasani, B., Talapatra, A., Ren, Y., ... Arroyave, R.
(2019).
On the fast kinetics of B2-L2(1) ordering in Ni-Co-Mn-In metamagnetic shape memory alloys. Journal of Alloys and Compounds.
781, 479-489.
-
Levin, Z. S., Wang, X., Kaynak, M., Karaman, I., & Hartwig, K. T.
(2019).
Strength and ductility of powder consolidated ultrafine-grain tantalum. International Journal of Refractory Metals and Hard Materials.
80, 73-84.
-
Haghgouyan, B., Hayrettin, C., Baxevanis, T., Karaman, I., & Lagoudas, D. C.
(2019).
Fracture toughness of NiTi-Towards establishing standard test methods for phase transforming materials. ACTA MATERIALIA.
162, 226-238.
-
Nasim, W., Yazdi, S., Santamarta, R., Malik, J., Erdeniz, D., Mansoor, B., ... Karaman, I.
(2019).
Structure and growth of core-shell nanoprecipitates in Al-Er-Sc-Zr-V-Si high-temperature alloys. Journal of Materials Science.
54(2), 1857-1871.
-
Hayrettin, C., Karakoc, O., Karaman, I., Mabe, J. H., Santamarta, R., & Pons, J.
(2019).
Two way shape memory effect in NiTiHf high temperature shape memory alloy tubes. ACTA MATERIALIA.
163, 1-13.
-
Canadinc, D., Trehern, W., Ma, J. i., Karaman, I., Sun, F., & Chaudhry, Z.
(2019).
Ultra-high temperature multi-component shape memory alloys. Scripta Materialia.
158, 83-87.
-
Mahmoudi, M., Tapia, G., Karayagiz, K., Franco, B., Ma, J. i., Arroyave, R., Karaman, I., & Elwany, A.
(2018).
Multivariate Calibration and Experimental Validation of a 3D Finite Element Thermal Model for Laser Powder Bed Fusion Metal Additive Manufacturing. Integrating Materials and Manufacturing Innovation.
7(3), 116-135.
-
Babacan, N., Bilal, M., Hayrettin, C., Liu, J., Benafan, O., & Karaman, I.
(2018).
Effects of cold and warm rolling on the shape memory response of Ni50Ti30Hf20 high-temperature shape memory alloy. ACTA MATERIALIA.
157, 228-244.
-
Susan, D. F., Jozaghi, T., Karaman, I., & Rodelas, J. M.
(2018).
Equal channel angular extrusion for bulk processing of Fe-Co-2V soft magnetic alloys, part I: Processing and mechanical properties. Journal of Materials Research.
33(15), 2168-2175.
-
Kustas, A. B., Michael, J. R., Susan, D. F., Karaman, I., & Jozaghi, T.
(2018).
Equal channel angular extrusion for bulk processing of Fe-Co-2V soft magnetic alloys, part II: Texture analysis and magnetic properties. Journal of Materials Research.
33(15), 2176-2188.
-
Uzer, B., Picak, S., Liu, J., Jozaghi, T., Canadinc, D., Karaman, I., Chumlyakov, Y. I., & Kireeva, I.
(2018).
On the mechanical response and microstructure evolution of NiCoCr single crystalline medium entropy alloys. MATERIALS RESEARCH LETTERS.
6(8), 442-449.
-
Karakoc, O., Hayrettin, C., Canadinc, D., & Karaman, I.
(2018).
Role of applied stress level on the actuation fatigue behavior of NiTiHf high temperature shape memory alloys. ACTA MATERIALIA.
153, 156-168.
-
Stonaha, P. J., Karaman, I., Arroyave, R., Salas, D., Bruno, N. M., Wang, Y., ... Manley, M. E.
(2018).
Glassy Phonon Heralds a Strain Glass State in a Shape Memory Alloy. Physical Review Letters.
120(24), 245701.
-
Chen, J., Bruno, N. M., Ning, Z., Shelton, W. A., Karaman, I., Huang, Y., Li, J., & Ross, J.
(2018).
Relative cooling power enhancement by tuning magneto-structural stability in Ni-Mn-In Heusler alloys. Journal of Alloys and Compounds.
744, 785-790.
-
Tabesh, M., Boyd, J., Atli, K. C., Karaman, I., & Lagoudas, D.
(2018).
Design, fabrication, and testing of a multiple-actuation shape memory alloy pipe coupler. Journal of Intelligent Material Systems and Structures.
29(6), 1165-1182.
-
Wang, Y., Salas, D., Medasani, B., Entel, P., Karaman, I., Arroyave, R., & Duong, T. C.
(2018).
First-Principles Characterization of Equilibrium Vacancy Concentration in Metamagnetic Shape Memory Alloys: An Example of Ni2MnGa. Physica Status Solidi B: Basic Solid State Physics.
255(2), 1700523-1700523.
-
Bruno, N. M., Karaman, I., & Chumlyakov, Y. I.
(2018).
Orientation Dependence of the Elastocaloric Effect in Ni54Fe19Ga27 Ferromagnetic Shape Memory Alloy. Physica Status Solidi B: Basic Solid State Physics.
255(2), 1700437-1700437.
-
Gibbons, S. L., Abrahams, R. A., Vaughan, M. W., Barber, R. E., Harris, R. C., Arroyave, R., & Karaman, I.
(2018).
Microstructural refinement in an ultra-high strength martensitic steel via equal channel angular pressing. Materials Science & Engineering: A.
725, 57-64.
-
Solomou, A., Zhao, G., Boluki, S., Joy, J. K., Qian, X., Karaman, I., Arroyave, R., & Lagoudas, D. C.
(2018).
Multi-objective Bayesian materials discovery: Application on the discovery of precipitation strengthened NiTi shape memory alloys through micromechanical modeling. Materials and Design.
160, 810-827.
-
Mahmoudi, M., Tapia, G., Franco, B., Ma, J., Arroyave, R., Karaman, I., & Elwany, A.
(2018).
On the printability and transformation behavior of nickel-titanium shape memory alloys fabricated using laser powder-bed fusion additive manufacturing. Journal of Manufacturing Processes.
35, 672-680.
-
Sam, J., Franco, B., Ma, J., Karaman, I., Elwany, A., & Mabe, J. H.
(2018).
Tensile actuation response of additively manufactured nickel-titanium shape memory alloys. Scripta Materialia.
146, 164-168.
-
Tapia, G., King, W., Johnson, L., Arroyave, R., Karaman, I., & Elwany, A.
(2018).
Uncertainty Propagation Analysis of Computational Models in Laser Powder Bed Fusion Additive Manufacturing Using Polynomial Chaos Expansions. 140(12),
-
Ozcan, H., Ma, J. i., Karaman, I., Chumlyakov, Y. I., Santamarta, R., Brown, J., & Noebe, R. D.
(2018).
Microstructural design considerations in Fe-Mn-Al-Ni shape memory alloy wires: Effects of natural aging. Scripta Materialia.
142, 153-157.
-
Aouassa, M., Zrir, M. A., Jadli, I., Bandyopadhyay, A. K., Karaman, I., Panczer, G., & Maaref, H.
(2018).
Mn-doping effects on structural and magnetic properties of Ge nanocrystals on insulator. Applied Surface Science.
428, 1056-1060.
-
Bruno, N. M., Salas, D., Wang, S., Roshchin, I. V., Santaniarta, R., Arroyave, R., ... Karaman, I.
(2018).
On the microstructural origins of martensitic transformation arrest in a NiCoMnIn magnetic shape memory alloy. ACTA MATERIALIA.
142, 95-106.
-
Babacan, N., Ma, J., Turkbas, O. S., Karaman, I., & Kockar, B.
(2018).
The effects of cold rolling and the subsequent heat treatments on the shape memory and the superelasticity characteristics of Cu73Al16Mn11 shape memory alloy. Smart Materials and Structures.
27(1), 015028-015028.
-
Kireeva, I. V., Chumlyakov, Y. I., Pobedennaya, Z. V., Vyrodova, A. V., & Karaman, I.
(2018).
Twinning in [001]-oriented single crystals of CoCrFeMnNi high-entropy alloy at tensile deformation. Materials Science & Engineering: A.
713, 253-259.
-
Yuce, S., Dogan, E. K., Emre, B., Bruno, N. M., Karaman, I., & Yurtseven, H.
(2017).
Analysis of Magnetization as a Function of Temperature for CoMn1-x Fe (x) Ge. Journal of Superconductivity and Novel Magnetism.
30(12), 3587-3594.
-
Karakoc, O., Hayrettin, C., Bass, M., Wang, S. J., Canadinc, D., Mabe, J. H., Lagoudas, D. C., & Karaman, I.
(2017).
Effects of upper cycle temperature on the actuation fatigue response of NiTiHf high temperature shape memory alloys. ACTA MATERIALIA.
138, 185-197.
-
Chaudhary, N., Abu-Odeh, A., Karaman, I., & Arroyave, R.
(2017).
A data-driven machine learning approach to predicting stacking faulting energy in austenitic steels. Journal of Materials Science.
52(18), 11048-11076.
-
Kireeva, I. V., Chumlyakov, Y. I., Pobedennaya, Z. V., Kuksgausen, I. V., & Karaman, I.
(2017).
Orientation dependence of twinning in single crystalline CoCrFeMnNi high-entropy alloy. Materials Science & Engineering: A.
705, 176-181.
-
Tapia, G., Johnson, L., Franco, B., Karayagiz, K., Ma, J. i., Arroyave, R., Karaman, I., & Elwany, A.
(2017).
Bayesian Calibration and Uncertainty Quantification for a Physics-Based Precipitation Model of Nickel-Titanium Shape-Memory Alloys. 139(7), 071002.
-
Canadinc, D., Trehern, W., Ozcan, H., Hayrettin, C., Karakoc, O., Karaman, I., Sun, F., & Chaudhry, Z.
(2017).
On the deformation response and cyclic stability of Ni50Ti35Hf15 high temperature shape memory alloy wires. Scripta Materialia.
135, 92-96.
-
Babacan, N., Atli, K. C., Turkbas, O. S., Karaman, I., & Kockar, B.
(2017).
The effect of dynamic aging on the cyclic stability of Cu73Al16Mn11 shape memory alloy. Materials Science & Engineering: A.
701, 352-358.
-
Ozcan, H., Ma, J. i., Wang, S. J., Karaman, I., Chumlyakov, Y., Brown, J., & Noebe, R. D.
(2017).
Effects of cyclic heat treatment and aging on superelasticity in oligocrystalline Fe-Mn-Al-Ni shape memory alloy wires. Scripta Materialia.
134, 66-70.
-
Basu, S., Dogan, E., Kondori, B., Karaman, I., & Benzerga, A. A.
(2017).
Towards designing anisotropy for ductility enhancement: A theory-driven investigation in Mg-alloys. ACTA MATERIALIA.
131, 349-362.
-
Aouassa, M., Jadli, I., Bandyopadhyay, A., Kim, S. K., Karaman, I., & Lee, J. Y.
(2017).
Mn-doped Ge self-assembled quantum dots via dewetting of thin films. Applied Surface Science.
397, 40-43.
-
Cox, A., Franco, B., Wang, S., Baxevanis, T., Karaman, I., & Lagoudas, D. C.
(2017).
Predictive Modeling of the Constitutive Response of Precipitation Hardened Ni-Rich NiTi. 3(1), 9-23.
-
Franco, B. E., Ma, J., Loveall, B., Tapia, G. A., Karayagiz, K., Liu, J., ... Karaman, I.
(2017).
A Sensory Material Approach for Reducing Variability in Additively Manufactured Metal Parts. Scientific Reports.
7(1), 3604.
-
Erdeniz, D., Nasim, W., Malik, J., Yost, A. R., Park, S., De Luca, A., ... Dunand, D. C.
(2017).
Effect of vanadium micro-alloying on the microstructural evolution and creep behavior of Al-Er-Sc-Zr-Si alloys. ACTA MATERIALIA.
124, 501-512.
-
Erdeniz, D., Nasim, W., Malik, J., Yost, A. R., Park, S., De Luca, A., ... Dunand, D. C.
(2017).
Effect of vanadium micro-alloying on the microstructural evolution and creep behavior of Al-Er-Sc-Zr-Si alloys (vol 124, pg 501, 2017). ACTA MATERIALIA.
133, 440-440.
-
Wang, S. J., Jozaghi, T., Karaman, I., Arroyave, R., & Chumlyakov, Y. I.
(2017).
Hierarchical evolution and thermal stability of microstructure with deformation twins in 316 stainless steel. Materials Science & Engineering: A.
694, 121-131.
-
Ma, J. i., Franco, B., Tapia, G., Karayagiz, K., Johnson, L., Liu, J., ... Elwany, A.
(2017).
Spatial Control of Functional Response in 4D-Printed Active Metallic Structures. Scientific Reports.
7(1), 46707.
-
Vollmer, M., Krooss, P., Karaman, I., & Niendorf, T.
(2017).
On the effect of titanium on quenching sensitivity and pseudoelastic response in Fe-Mn-Al-Ni-base shape memory alloy. Scripta Materialia.
126, 20-23.
-
Bruno, N. M., Wang, S., Karaman, I., & Chumlyakov, Y. I.
(2017).
Reversible Martensitic Transformation under Low Magnetic Fields in Magnetic Shape Memory Alloys. Scientific Reports.
7(1), 40434.
-
Tseng, L. W., Ma, J. i., Vollmer, M., Krooss, P., Niendorf, T., & Karaman, I.
(2016).
Effect of grain size on the superelastic response of a FeMnAlNi polycrystalline shape memory alloy. Scripta Materialia.
125, 68-72.
-
Evirgen, A., Karaman, I., Santamarta, R., Pons, J., Hayrettin, C., & Noebe, R. D.
(2016).
Relationship between crystallographic compatibility and thermal hysteresis in Ni-rich NiTiHf and NiTiZr high temperature shape memory alloys. ACTA MATERIALIA.
121, 374-383.
-
Kireeva, I. V., Chumlyakov, Y. I., Pobedennaya, Z. V., Platonova, Y. N., Kuksgauzen, I. V., Kuksgauzen, D. A., ... Sehitoglu, H.
(2016).
Slip and Twinning in the [49]-Oriented Single Crystals of a High-Entropy Alloy. Russian Physics Journal.
59(8), 1242-1250.
-
Kireeva, I., Chumlyakov, Y., Pobedennaya, Z., Kuksgauzen, D., Karaman, I., & Sehitoglu, H.
(2016).
Mechanisms of Plastic Deformation in [(1)over-bar11]-Oriented Single Crystals of FeNiMnCrCo High Entropy Alloy. AIP Conference Proceedings.
1783(1), 020090.
-
Perez-Sierra, A. M., Pons, J., Santamarta, R., Karaman, I., & Noebe, R. D.
(2016).
Stability of a Ni-rich Ni-Ti-Zr high temperature shape memory alloy upon low temperature aging and thermal cycling. Scripta Materialia.
124, 47-50.
-
Dogan, E., Wang, S., Vaughan, M. W., & Karaman, I.
(2016).
Dynamic precipitation in Mg-3Al-1Zn alloy during different plastic deformation modes. ACTA MATERIALIA.
116, 1-13.
-
Hanaor, D., Hu, L., Kan, W. H., Proust, G., Foley, M., Karaman, I., & Radovic, M.
(2016).
Compressive performance and crack propagation in Al alloy/Ti2AlC composites. Materials Science & Engineering: A.
672, 247-256.
-
Bruno, N. M., Huang, Y. J., Dennis, C. L., Li, J. G., Shull, R. D., Ross, J. H., Chumlyakov, Y. I., & Karaman, I.
(2016).
Effect of grain constraint on the field requirements for magnetocaloric effect in Ni45Co5Mn40Sn10 melt-spun ribbons. Journal of Applied Physics.
120(7), 075101-075101.
-
Coppola, A. M., Hu, L., Thakre, P. R., Radovic, M., Karaman, I., Sottos, N. R., & White, S. R.
(2016).
Active Cooling of a Microvascular Shape Memory Alloy-Polymer Matrix Composite Hybrid Material. Advanced Engineering Materials.
18(7), 1145-1153.
-
Guiza-Arguello, V. R., Monroe, J. A., Karaman, I., & Hahn, M. S.
(2016).
Cytocompatibility evaluation of NiMnSn meta-magnetic shape memory alloys for biomedical applications. Journal of Biomedical Materials Research - Part B Applied Biomaterials.
104(5), 853-863.
-
Brown, T. D., Karaman, I., & Shamberger, P. J.
(2016).
Impact of cycle-hysteresis interactions on the performance of giant magnetocaloric effect refrigerants. Materials Research Express.
3(7), 074001-074001.
-
Chumlyakov, Y. I., Kireeva, I. V., Kutz, O. A., Turabi, A. S., Karaca, H. E., & Karaman, I.
(2016).
Unusual reversible twinning modes and giant superelastic strains in FeNiCoAlNb single crystals. Scripta Materialia.
119, 43-46.
-
Yuce, S., Bruno, N. M., Emre, B., & Karaman, I.
(2016).
Accessibility investigation of large magnetic entropy change in CoMn1-xFexGe. 119(13), 133901.
-
Tseng, L. W., Ma, J. i., Wang, S. J., Karaman, I., & Chumlyakov, Y. I.
(2016).
Effects of crystallographic orientation on the superelastic response of FeMnAlNi single crystals. Scripta Materialia.
116, 147-151.
-
Vollmer, M., Krooss, P., Kriegel, M. J., Klemm, V., Somsen, C., Ozcan, H., ... Niendorf, T.
(2016).
Cyclic degradation in bamboo-like Fe-Mn-Al-Ni shape memory alloys - The role of grain orientation. Scripta Materialia.
114, 156-160.
-
Chen, J., Bruno, N. M., Karaman, I., Huang, Y., Li, J., & Ross, J.
(2016).
Direct measure of giant magnetocaloric entropy contributions in Ni-Mn-In. ACTA MATERIALIA.
105, 176-181.
-
Evirgen, A., Karaman, I., Pons, J., Santamarta, R., & Noebe, R. D.
(2016).
Role of nano-precipitation on the microstructure and shape memory characteristics of a new Ni50.3Ti34.7Zr15 shape memory alloy. Materials Science & Engineering: A.
655, 193-203.
-
Hu, L., O'Neil, M., Erturun, V., Benitez, R., Proust, G., Karaman, I., & Radovic, M.
(2016).
High-Performance Metal/Carbide Composites with Far-From-Equilibrium Compositions and Controlled Microstructures. Scientific Reports.
6(1), 35523.
-
Perez-Sierra, A. M., Bruno, N. M., Pons, J., Cesari, E., & Karaman, I.
(2016).
Atomic order and martensitic transformation entropy change in Ni-Co-Mn-In metamagnetic shape memory alloys. Scripta Materialia.
110, 61-64.
-
Monroe, J. A., Gehring, D., Karaman, I., Arroyave, R., Brown, D. W., & Clausen, B.
(2016).
Tailored thermal expansion alloys. ACTA MATERIALIA.
102, 333-341.
-
Arroyave, R., Talapatra, A., Johnson, L., Singh, N., Ma, J. i., & Karaman, I.
(2015).
Computational Thermodynamics and Kinetics-Based ICME Framework for High-Temperature Shape Memory Alloys. Shape Memory and Superelasticity.
1(4), 429-449.
-
Santamarta, R., Evirgen, A., Perez-Sierra, A. M., Pons, J., Cesari, E., Karaman, I., & Noebe, R. D.
(2015).
Effect of Thermal Treatments on Ni-Mn-Ga and Ni-Rich Ni-Ti-Hf/Zr High-Temperature Shape Memory Alloys. 1(4), 418-428.
-
Monroe, J. A., Raymond, J. E., Xu, X., Nagasako, M., Kainuma, R., Chumlyakov, Y. I., Arroyave, R., & Karaman, I.
(2015).
Multiple ferroic glasses via ordering. ACTA MATERIALIA.
101, 107-115.
-
Bruno, N. M., Karaman, I., Ross, J. H., & Chumlyakov, Y. I.
(2015).
High-field magneto-thermo-mechanical testing system for characterizing multiferroic bulk alloys. Review of Scientific Instruments.
86(11), 113902-113902.
-
Vollmer, M., Segel, C., Krooss, P., Guenther, J., Tseng, L. W., Karaman, I., ... Niendorf, T.
(2015).
On the effect of gamma phase formation on the pseudoelastic performance of polycrystalline Fe-Mn-Al-Ni shape memory alloys. Scripta Materialia.
108, 23-26.
-
Atli, K. C., Karaman, I., Noebe, R. D., Bigelow, G., & Gaydosh, D.
(2015).
Work production using the two-way shape memory effect in NiTi and a Ni-rich NiTiHf high-temperature shape memory alloy. Smart Materials and Structures.
24(12), 125023-125023.
-
Stonaha, P. J., Manley, M. E., Bruno, N. M., Karaman, I., Arroyave, R., Singh, N., Abernathy, D. L., & Chi, S.
(2015).
Lattice vibrations boost demagnetization entropy in a shape-memory alloy. Physical Review B: Condensed Matter and Materials Physics.
92(14), 140406.
-
Brown, T. D., Bruno, N. M., Chen, J., Karaman, I., Ross, J., & Shamberger, P. J.
(2015).
A Preisach-Based Nonequilibrium Methodology for Simulating Performance of Hysteretic Magnetic Refrigeration Cycles. JOM.
67(9), 2123-2132.
-
Tseng, L. W., Ma, J. i., Hornbuckle, B. C., Karaman, I., Thompson, G. B., Luo, Z. P., & Chumlyakov, Y. I.
(2015).
The effect of precipitates on the superelastic response of [100] oriented FeMnAlNi single crystals under compression. ACTA MATERIALIA.
97, 234-244.
-
Huang, Y. J., Hu, Q. D., Bruno, N. M., Chen, J., Karaman, I., Ross, J., & Li, J. G.
(2015).
Giant elastocaloric effect in directionally solidified Ni-Mn-In magnetic shape memory alloy. Scripta Materialia.
105, 42-45.
-
Dogan, E., Vaughan, M. W., Wang, S. J., Karaman, I., & Proust, G.
(2015).
Role of starting texture and deformation modes on low-temperature shear formability and shear localization of Mg-3Al-1Zn alloy. ACTA MATERIALIA.
89, 408-422.
-
Tseng, L. W., Ma, J. i., Wang, S. J., Karaman, I., Kaya, M., Luo, Z. P., & Chumlyakov, Y. I.
(2015).
Superelastic response of a single crystalline FeMnAlNi shape memory alloy under tension and compression. ACTA MATERIALIA.
89, 374-383.
-
Tseng, L. W., Ma, J. i., Karaman, I., Wang, S. J., & Chumlyakov, Y. I.
(2015).
Superelastic response of the FeNiCoAlTi single crystals under tension and compression. Scripta Materialia.
101, 1-4.
-
Kothalkar, A., Cerit, A., Proust, G., Basu, S., Radovic, M., & Karaman, I.
(2015).
Interfacial study of NiTi-Ti3SiC2 solid state diffusion bonded joints. Materials Science & Engineering: A.
622, 168-177.
-
Yager, S., Ma, J., Ozcan, H., Kilinc, H. I., Elwany, A. H., & Karaman, I.
(2015).
Mechanical properties and microstructure of removable partial denture clasps manufactured using selective laser melting. ADDITIVE MANUFACTURING.
8, 117-123.
-
Evirgen, A., Karaman, I., Santamarta, R., Pons, J., & Noebe, R. D.
(2015).
Microstructural characterization and shape memory characteristics of the Ni50.3Ti34.7Hf15 shape memory alloy. ACTA MATERIALIA.
83, 48-60.
-
Emre, B., Bruno, N. M., Emre, S. Y., & Karaman, I.
(2014).
Effect of niobium addition on the martensitic transformation and magnetocaloric effect in low hysteresis NiCoMnSn magnetic shape memory alloys. Applied Physics Letters.
105(23), 231910.
-
Saray, O., Purcek, G., Karaman, I., & Maier, H. J.
(2014).
Improvement of formability of ultrafine-grained materials by post-SPD annealing. Materials Science & Engineering: A.
619, 119-128.
-
Chen, J., Bruno, N. M., Karaman, I., Huang, Y., Li, J., & Ross, J.
(2014).
Calorimetric and magnetic study for Ni50Mn36In14 and relative cooling power in paramagnetic inverse magnetocaloric systems. Journal of Applied Physics.
116(20), 203901-203901.
-
Krooss, P., Somsen, C., Niendorf, T., Schaper, M., Karaman, I., Chumlyakov, Y., Eggeler, G., & Maier, H. J.
(2014).
Cyclic degradation mechanisms in aged FeNiCoAlTa shape memory single crystals. ACTA MATERIALIA.
79, 126-137.
-
Atli, K. C., Karaman, I., & Noebe, R. D.
(2014).
Influence of tantalum additions on the microstructure and shape memory response of Ti50.5Ni24.5Pd25 high-temperature shape memory alloy. Materials Science & Engineering: A.
613, 250-258.
-
Chumlyakov, Y. I., Kireeva, I. V., Poklonov, V. V., Pobedennaya, Z. V., & Karaman, I.
(2014).
The shape-memory effect and superelasticity in single-crystal ferromagnetic alloy FeNiCoAlTi. Pis'ma v Zhurnal Tekhnicheskoi Fiziki / Technical Physics Letters.
40(9), 747-750.
-
Bruno, N. M., Yegin, C., Karaman, I., Chen, J., Ross, J., Liu, J., & Li, J.
(2014).
The effect of heat treatments on Ni43Mn42Co4Sn11 meta-magnetic shape memory alloys for magnetic refrigeration. ACTA MATERIALIA.
74, 66-84.
-
Hu, L., Kothalkar, A., O'Neil, M., Karaman, I., & Radovic, M.
(2014).
Current-Activated, Pressure-Assisted Infiltration: A Novel, Versatile Route for Producing Interpenetrating Ceramic-Metal Composites. MATERIALS RESEARCH LETTERS.
2(3), 124-130.
-
Dogan, E., Karaman, I., Ayoub, G., & Kridli, G.
(2014).
Reduction in tension-compression asymmetry via grain refinement and texture design in Mg-3Al-1Zn sheets. Materials Science & Engineering: A.
610, 220-227.
-
Herrera-Solaz, V., LLorca, J., Dogan, E., Karaman, I., & Segurado, J.
(2014).
An inverse optimization strategy to determine single crystal mechanical behavior from polycrystal tests: Application to AZ31 Mg alloy. International journal of plasticity.
57, 1-15.
-
Chari, A., Dogan, E., Talapatra, A., Chivukula, A. R., Garay, A., Karaman, I., & Arroyave, R.
(2014).
Computational thermodynamics of the CoNiGa high temperature shape memory alloy system. CALPHAD: the international research journal for calculation of phase diagrams.
45, 167-177.
-
Evirgen, A., Karaman, I., Santamarta, R., Pons, J., & Noebe, R. D.
(2014).
Microstructural characterization and superelastic response of a Ni50.3Ti29.7Zr20 high-temperature shape memory alloy. Scripta Materialia.
81, 12-15.
-
Liu, Y., Karaman, I., Wang, H., & Zhang, X.
(2014).
Two types of martensitic phase transformations in magnetic shape memory alloys by in-situ nanoindentation studies. ADVANCED MATERIALS.
26(23), 3893-3898.
-
Kothalkar, A. D., Benitez, R., Hu, L., Radovic, M., & Karaman, I.
(2014).
Thermo-mechanical Response and Damping Behavior of Shape Memory Alloy-MAX Phase Composites. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.
45A(5), 2646-2658.
-
Purcek, G., Yanar, H., Saray, O., Kraman, I., & Maier, H. J.
(2014).
Effect of precipitation on mechanical and wear properties of ultrafine-grained Cu-Cr-Zr alloy. Wear.
311(1-2), 149-158.
-
Qian, T., Karaman, I., & Marx, M.
(2014).
Mechanical Properties of Nanocrystalline and Ultrafine-Grained Nickel with Bimodal Microstructure. Advanced Engineering Materials.
16(11), 1323-1339.
-
Hu, L., Kothalkar, A., Proust, G., Karaman, I., & Radovic, M.
(2014).
Fabrication and characterization of NiTi/Ti3SiC2 and NiTi/Ti2AlC composites. Journal of Alloys and Compounds.
610, 635-644.
-
Haldar, K., Lagoudas, D. C., & Karaman, I.
(2014).
Magnetic field-induced martensitic phase transformation in magnetic shape memory alloys: Modeling and experiments. Journal of the Mechanics and Physics of Solids.
69(1), 33-66.
-
Cheng, F., Hu, L., Reddy, J. N., Karaman, I., Hoffman, E., & Radovic, M.
(2014).
Temperature-dependent thermal properties of a shape memory alloy/MAX phase composite: Experiments and modeling. ACTA MATERIALIA.
68, 267-278.
-
Huang, Y. J., Hu, Q. D., Bruno, N., Karaman, I., & Li, J. G.
(2014).
Influence of grain boundary on pseudoelasticity in highly-oriented polycrystalline Ni52Fe17Ga27Co4 ferromagnetic shape memory alloy. Materials Letters.
114, 11-14.
-
Chumlyakov, Y. I., Kireeva, I. V., Kretinina, I. V., Keinikh, K. S., Kuts, O. A., Kirillov, V. A., Karaman, I., & Maier, H.
(2013).
Shape Memory effect and Superelasticity in the [001] Single crystals of a FeNiCoAlTa Alloy with gamma-alpha '-Thermoelastic Martensitic Transformations. Russian Physics Journal.
56(8), 920-929.
-
Chumlyakov, Y. u., Kireeva, I., Panchenko, E., Karaman, I., Maier, H. J., & Timofeeva, E.
(2013).
Shape memory effect and high-temperature superelasticity in high-strength single crystals. Journal of Alloys and Compounds.
577(SUPPL. 1), S393-S398.
-
Rios, S., Bufford, D., Karaman, I., Wang, H., & Zhang, X.
(2013).
Magnetic field induced phase transformation in polycrystalline NiCoMnAl thin films. Applied Physics Letters.
103(13), 132404.
-
Evirgen, A., Karaman, I., Noebe, R. D., Santamarta, R., & Pons, J.
(2013).
Effect of precipitation on the microstructure and the shape memory response of the Ni50.3Ti29.7Zr20 high temperature shape memory alloy. Scripta Materialia.
69(5), 354-357.
-
Saray, O., Purcek, G., Karaman, I., & Maier, H. J.
(2013).
Formability of Ultrafine-Grained Interstitial-Free Steels. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.
44A(9), 4194-4206.
-
Atli, K. C., Franco, B. E., Karaman, I., Gaydosh, D., & Noebe, R. D.
(2013).
Influence of crystallographic compatibility on residual strain of TiNi based shape memory alloys during thermo-mechanical cycling. Materials Science & Engineering: A.
574, 9-16.
-
Rubitschek, F., Niendorf, T., Karaman, I., & Maier, H. J.
(2013).
Surface hardening of biocompatible ultrafine-grained niobium zirconium alloy by two-stage oxidation treatment. 48(13), 4549-4556.
-
Hu, L., Karaman, I., & Radovic, M.
(2013).
Simple, inexpensive synthesis of damage-tolerant MAX phase foams. AMERICAN CERAMIC SOCIETY BULLETIN.
92(5), 31-32.
-
Ma, J. i., Hornbuckle, B. C., Karaman, I., Thompson, G. B., Luo, Z. P., & Chumlyakov, Y. I.
(2013).
The effect of nanoprecipitates on the superelastic properties of FeNiCoAlTa shape memory alloy single crystals. ACTA MATERIALIA.
61(9), 3445-3455.
-
Wardlaw, J. L., Karaman, I., & Karsilayan, A. I.
(2013).
Low-Power Circuits and Energy Harvesting for Structural Health Monitoring of Bridges. IEEE Sensors Journal.
13(2), 709-722.
-
Li, S., Zhu, R., Karaman, I., & Arroyave, R.
(2013).
Development of a kinetic model for bainitic isothermal transformation in transformation-induced plasticity steels. ACTA MATERIALIA.
61(8), 2884-2894.
-
Atli, K. C., Karaman, I., Noebe, R. D., & Gaydosh, D.
(2013).
The effect of training on two-way shape memory effect of binary NiTi and NiTi based ternary high temperature shape memory alloys. Materials Science & Engineering: A.
560, 653-666.
-
Krooss, P., Niendorf, T., Karaman, I., Chumlyakov, Y., & Maier, H. J.
(2012).
CYCLIC DEFORMATION BEHAVIOR OF AGED FeNiCoAlTa SINGLE CRYSTALS. Functional Materials Letters.
5(4), 1250045-1250045.
-
Monroe, J. A., Karaman, I., Basaran, B., Ito, W., Umetsu, R. Y., Kainuma, R., Koyama, K., & Chumlyakov, Y. I.
(2012).
Direct measurement of large reversible magnetic-field-induced strain in Ni-Co-Mn-In metamagnetic shape memory alloys. ACTA MATERIALIA.
60(20), 6883-6891.
-
Evirgen, A., Basner, F., Karaman, I., Noebe, R. D., Pons, J., & Santamarta, R.
(2012).
EFFECT OF AGING ON THE MARTENSITIC TRANSFORMATION CHARACTERISTICS OF A Ni-RICH NiTiHf HIGH TEMPERATURE SHAPE MEMORY ALLOY. 5(4), 1250038-1250038.
-
Evirgen, A., Ma, J., Karaman, I., Luo, Z. P., & Chumlyakov, Y. I.
(2012).
Effect of aging on the superelastic response of a single crystalline FeNiCoAlTa shape memory alloy. Scripta Materialia.
67(5), 475-478.
-
Razavi, S. M., Foley, D. C., Karaman, I., Hartwig, K. T., Duygulu, O., Kecskes, L. J., Mathaudhu, S. N., & Hammond, V. H.
(2012).
Effect of grain size on prismatic slip in Mg-3Al-1Zn alloy. Scripta Materialia.
67(5), 439-442.
-
Ozdemir, N., Karaman, I., Mara, N. A., Chumlyakov, Y. I., & Karaca, H. E.
(2012).
Size effects in the superelastic response of Ni54Fe19Ga27 shape memory alloy pillars with a two stage martensitic transformation. ACTA MATERIALIA.
60(16), 5670-5685.
-
Raj, S. V., Calkins, F. T., Karaman, I., Miyazaki, S., Noebe, R. D., & Vaidyanathan, R.
(2012).
Foreword: Physical and Mechanical Metallurgy of Shape Memory Alloys for Actuator Applications. 43(8), 2869-2869.
-
McMahon, R. E., Ma, J. i., Verkhoturov, S. V., Munoz-Pinto, D., Karaman, I., Rubitschek, F., Maier, H. J., & Hahn, M. S.
(2012).
A comparative study of the cytotoxicity and corrosion resistance of nickel-titanium and titanium-niobium shape memory alloys. Acta Biomaterialia.
8(7), 2863-2870.
-
Monroe, J. A., Cruz-Perez, J., Yegin, C., Karaman, I., Geltmacher, A. B., Everett, R. K., & Kainuma, R.
(2012).
Magnetic response of porous NiCoMnSn metamagnetic shape memory alloys fabricated using solid-state replication. Scripta Materialia.
67(1), 116-119.
-
Purcek, G., Saray, O., Karaman, I., & Maier, H. J.
(2012).
High Strength and High Ductility of Ultrafine-Grained, Interstitial-Free Steel Produced by ECAE and Annealing. 43A(6), 1884-1894.
-
Saray, O., Purcek, G., Karaman, I., & Maier, H. J.
(2012).
Impact Toughness of Ultrafine-Grained Interstitial-Free Steel. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.
43A(11), 4320-4330.
-
Basu, S., Obando, N., Gowdy, A., Karaman, I., & Radovic, M.
(2012).
Long-Term Oxidation of Ti2AlC in Air and Water Vapor at 1000-1300 degrees C Temperature Range (vol 159, pg C90, 2012). Journal of the Electrochemical Society.
159(5), S9-S9.
-
Karaca, H. E., Basaran, B., Karaman, I., & Chumlyakov, Y. I.
(2012).
Stress-induced martensite to austenite phase transformation in Ni2MnGa magnetic shape memory alloys. 21(4), 045011-045011.
-
Kireeva, I. V., Chumlyakov, Y. I., Kretinina, I. V., Karaman, I., & Cesari, E.
(2012).
Superelasticity in CoNiGa single crystals containing -phase particles. Russian Physics Journal.
54(11), 1295-1297.
-
Rubitschek, F., Niendorf, T., Karaman, I., & Maier, H. J.
(2012).
Microstructural stability of ultrafine-grained niobium-zirconium alloy at elevated temperatures. Journal of Alloys and Compounds.
517, 61-68.
-
Ma, J., Kockar, B., Evirgen, A., Karaman, I., Luo, Z. P., & Chumlyakov, Y. I.
(2012).
Shape memory behavior and tension-compression asymmetry of a FeNiCoAlTa single-crystalline shape memory alloy. ACTA MATERIALIA.
60(5), 2186-2195.
-
Jetta, N., Ozdemir, N., Rios, S., Bufford, D., Karaman, I., & Zhang, X.
(2012).
Phase transformations in sputtered Ni-Mn-Ga magnetic shape memory alloy thin films. THIN SOLID FILMS.
520(9), 3433-3439.
-
Basu, S., Obando, N., Gowdy, A., Karaman, I., & Radovic, M.
(2012).
Long-Term Oxidation of Ti2AlC in Air andWater Vapor at 1000-1300 degrees C Temperature Range. Journal of the Electrochemical Society.
159(2), C90-C96.
-
Zhu, R., Li, S., Karaman, I., Arroyave, R., Niendorf, T., & Maier, H. J.
(2012).
Multi-phase microstructure design of a low-alloy TRIP-assisted steel through a combined computational and experimental methodology. ACTA MATERIALIA.
60(6-7), 3022-3033.
-
Hu, L., Benitez, R., Basu, S., Karaman, I., & Radovic, M.
(2012).
Processing and characterization of porous Ti2AlC with controlled porosity and pore size. ACTA MATERIALIA.
60(18), 6266-6277.
-
Dogan, E., Karaman, I., Singh, N., Chivukula, A., Thawabi, H. S., & Arroyave, R.
(2012).
The effect of electronic and magnetic valences on the martensitic transformation of CoNiGa shape memory alloys. ACTA MATERIALIA.
60(8), 3545-3558.
-
Li, S., Zhu, R., Karaman, I., & Arroyave, R.
(2012).
Thermodynamic analysis of two-stage heat treatment in TRIP steels. ACTA MATERIALIA.
60(17), 6120-6130.
-
Rubitschek, F., Niendorf, T., Karaman, I., & Maier, H. J.
(2012).
Corrosion fatigue behavior of a biocompatible ultrafine-grained niobium alloy in simulated body fluid. Journal of The Mechanical Behavior of Biomedical Materials.
5(1), 181-192.
-
Chumlyakov, Y. I., Kireeva, I. V., Panchenko, E. Y., Kirillov, V. A., Timofeeva, E. E., Kretinina, I. V., ... Cesari, E.
(2012).
THERMOELASTIC MARTENSITIC TRANSFORMATIONS IN SINGLE CRYSTALS WITH DISPERSE PARTICLES. 54(8), 937-950.
-
Kumar, P. K., Desai, U., Monroe, J. A., Lagoudas, D. C., Karaman, I., Bigelow, G., & Noebe, R. D.
(2011).
Experimental investigation of simultaneous creep, plasticity and transformation of Ti50.5Pd30Ni19.5 high temperature shape memory alloy during cyclic actuation. 530(1), 117-127.
-
Purcek, G., Saray, O., Rubitschek, F., Niendorf, T., Maier, H. J., & Karaman, I.
(2011).
Effect of internal oxidation on wear behavior of ultrafine-grained Nb-Zr. ACTA MATERIALIA.
59(20), 7683-7694.
-
Ito, K., Ito, W., Umetsu, R. Y., Karaman, I., Ishida, K., & Kainuma, R.
(2011).
Metamagnetic Shape Memory Effect in Porous Ni43Co7Mn39Sn11 Alloy Compacts Fabricated by Pressureless Sintering. 52(12), 2270-2273.
-
Singh, N., Dogan, E., Karaman, I., & Arroyave, R.
(2011).
Effect of configurational order on the magnetic characteristics of Co-Ni-Ga ferromagnetic shape memory alloys. Physical review B (PRB).
84(18), 184201.
-
Atli, K. C., Karaman, I., & Noebe, R. D.
(2011).
Work output of the two-way shape memory effect in Ti50.5Ni24.5Pd25 high-temperature shape memory alloy. Scripta Materialia.
65(10), 903-906.
-
Al-Maharbi, M., Karaman, I., Beyerlein, I. J., Foley, D., Hartwig, K. T., Kecskes, L. J., & Mathaudhu, S. N.
(2011).
Microstructure, crystallographic texture, and plastic anisotropy evolution in an Mg alloy during equal channel angular extrusion processing. Materials Science & Engineering: A.
528(25-26), 7616-7627.
-
Ma, J., Karaman, I., Kockar, B., Maier, H. J., & Chumlyakov, Y. I.
(2011).
Severe plastic deformation of Ti74Nb26 shape memory alloys. Materials Science & Engineering: A.
528(25-26), 7628-7635.
-
Saray, O., Purcek, G., Karaman, I., Neindorf, T., & Maier, H. J.
(2011).
Equal-channel angular sheet extrusion of interstitial-free (IF) steel: Microstructural evolution and mechanical properties. Materials Science & Engineering: A.
528(21), 6573-6583.
-
Monroe, J. A., Karaman, I., Lagoudas, D. C., Bigelow, G., Noebe, R. D., & Padula, S.
(2011).
Determining recoverable and irrecoverable contributions to accumulated strain in a NiTiPd high-temperature shape memory alloy during thermomechanical cycling. Scripta Materialia.
65(2), 123-126.
-
Atli, K. C., Karaman, I., Noebe, R. D., Garg, A., Chumlyakov, Y. I., & Kireeva, I. V.
(2011).
Shape memory characteristics of Ti49.5Ni25Pd25Sc0.5 high-temperature shape memory alloy after severe plastic deformation. ACTA MATERIALIA.
59(12), 4747-4760.
-
Kireeva, I. V., Chumlyakov, Y. I., Kirillov, V. A., Karaman, I., & Cesari, E.
(2011).
Orientation and Temperature Dependence of Superelasticity Caused by Reversible gamma-alpha ' Martensitic Transformations in FeNiCoAlTa Single Crystals. Pis'ma v Zhurnal Tekhnicheskoi Fiziki / Technical Physics Letters.
37(5), 487-490.
-
Purcek, G., Yapici, G. G., Karaman, I., & Maier, H. J.
(2011).
Effect of commercial purity levels on the mechanical properties of ultrafine-grained titanium. Materials Science & Engineering: A.
528(6), 2303-2308.
-
Kireeva, I. V., Chumlyakov, Y. I., Kirillov, V. A., Kretinina, I. V., Danil'son, Y. N., Karaman, I., & Cesari, E.
(2011).
THERMOELASTIC gamma-alpha '-MARTENSITIC TRANSFORMATIONS IN FeNiCoAlTa AGING SINGLE CRYSTALS. Russian Physics Journal.
53(10), 1103-1106.
-
Atli, K. C., Karaman, I., Noebe, R. D., & Maier, H. J.
(2011).
Comparative analysis of the effects of severe plastic deformation and thermomechanical training on the functional stability of Ti50.5Ni24.5Pd25 high-temperature shape memory alloy. Scripta Materialia.
64(4), 315-318.
-
Dogan, E., Karaman, I., Chumlyakov, Y. I., & Luo, Z. P.
(2011).
Microstructure and martensitic transformation characteristics of CoNiGa high temperature shape memory alloys. ACTA MATERIALIA.
59(3), 1168-1183.
-
Basu, S., Ozaydin, M. F., Kothalkar, A., Karaman, I., & Radovic, M.
(2011).
Phase and morphology evolution in high-temperature Ti3SiC2-NiTi diffusion-bonded joints. Scripta Materialia.
65(3), 237-240.
-
Foley, D. C., Al-Maharbi, M., Hartwig, K. T., Karaman, I., Kecskes, L. J., & Mathaudhu, S. N.
(2011).
Grain refinement vs. crystallographic texture: Mechanical anisotropy in a magnesium alloy. Scripta Materialia.
64(2), 193-196.
-
Dadda, J., Maier, H. J., Karaman, I., & Chumlyakov, Y.
(2010).
High-temperature in-situ microscopy during stress-induced phase transformations in Co49Ni21Ga30 shape memory alloy single crystals. 101(12), 1503-1513.
-
Ito, K., Ito, W., Umetsu, R. Y., Karaman, I., Ishida, K., & Kainuma, R.
(2010).
Mechanical and shape memory properties of Ni43Co7Mn39Sn11 alloy compacts fabricated by pressureless sintering. Scripta Materialia.
63(12), 1236-1239.
-
Panchenko, E., Chumlyakov, Y., Maier, H. J., Timofeeva, E., & Karaman, I.
(2010).
Tension/compression asymmetry of functional properties in [001]-oriented ferromagnetic NiFeGaCo single crystals. Intermetallics.
18(12), 2458-2463.
-
Kockar, B., Atli, K. C., Ma, J., Haouaoui, M., Karaman, I., Nagasako, M., & Kainuma, R.
(2010).
Role of severe plastic deformation on the cyclic reversibility of a Ti50.3Ni33.7Pd16 high temperature shape memory alloy. ACTA MATERIALIA.
58(19), 6411-6420.
-
Ma, J., Karaman, I., & Noebe, R. D.
(2010).
High temperature shape memory alloys. International Materials Reviews.
55(5), 257-315.
-
Ma, J., Karaman, I., & Chumlyakov, Y. I.
(2010).
Superelastic memory effect in Ti74Nb26 shape memory alloy. Scripta Materialia.
63(3), 265-268.
-
Kireeva, I. V., Chumlyakov, Y. I., Pobedennaya, Z. V., Kretinina, I. V., Cesari, E., Kustov, S. B., ... Karaman, I.
(2010).
Orientation Dependence of Superelasticity in Ferromagnetic Single Crystals Co49Ni21Ga30. 110(1), 78-90.
-
Purcek, G., Saray, O., Kucukomeroglu, T., Haouaoui, M., & Karaman, I.
(2010).
Effect of equal-channel angular extrusion on the mechanical and tribological properties of as-cast Zn-40Al-2Cu-2Si alloy. Materials Science & Engineering: A.
527(15), 3480-3488.
-
Atli, K. C., Karaman, I., Noebe, R. D., Garg, A., Chumlyakov, Y. I., & Kireeva, I. V.
(2010).
Improvement in the Shape Memory Response of Ti50.5Ni24.5Pd25 High-Temperature Shape Memory Alloy with Scandium Microalloying. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.
41A(10), 2485-2497.
-
Rios, S., Karaman, I., & Zhang, X.
(2010).
Crystallization and high temperature shape memory behavior of sputter-deposited NiMnCoIn thin films. 96(17), 173102.
-
Ma, J., Karaman, I., Maier, H. J., & Chumlyakov, Y. I.
(2010).
Superelastic cycling and room temperature recovery of Ti74Nb26 shape memory alloy. ACTA MATERIALIA.
58(6), 2216-2224.
-
Monroe, J. A., Karaman, I., Karaca, H. E., Chumlyakov, Y. I., & Maier, H. J.
(2010).
High-temperature superelasticity and competing microstructural mechanisms in Co49Ni21Ga30 shape memory alloy single crystals under tension. Scripta Materialia.
62(6), 368-371.
-
Ma, J. i., & Karaman, I.
(2010).
Materials science. Expanding the repertoire of shape memory alloys. Science.
327(5972), 1468-1469.
-
Ito, W., Basaran, B., Umetsu, R. Y., Karaman, I., Kainuma, R., & Ishida, K.
(2010).
Shape Memory Response in Ni40Co10Mn33Al17 Polycrystalline Alloy. 51(3), 525-528.
-
Beyerlein, I. J., Capolungo, L., Yapici, G. G., Tome, C. N., & Karaman, I.
(2010).
Multi-Scale Modeling of Texture Evolution in Beryllium and Zirconium during Equal Channel Angular Extrusion. 633-634, 483-510.
-
Al-Maharbi, M., Karaman, I., & Purcek, G.
(2010).
Flow response of a severe plastically deformed two-phase zinc-aluminum alloy. Materials Science & Engineering: A.
527(3), 518-525.
-
Dadda, J., Maier, H. J., Karaman, I., & Chumlyakov, Y. I.
(2009).
Cyclic deformation and austenite stabilization in Co35Ni35Al30 single crystalline high-temperature shape memory alloys. ACTA MATERIALIA.
57(20), 6123-6134.
-
Yapici, G. G., Tome, C. N., Beyerlein, I. J., Karaman, I., Vogel, S. C., & Liu, C.
(2009).
Plastic flow anisotropy of pure zirconium after severe plastic deformation at room temperature. ACTA MATERIALIA.
57(16), 4855-4865.
-
Purcek, G., Saray, O., Kul, O., Karaman, I., Yapici, G. G., Haouaoui, M., & Maier, H. J.
(2009).
Mechanical and wear properties of ultrafine-grained pure Ti produced by multi-pass equal-channel angular extrusion. Materials Science & Engineering: A.
517(1-2), 97-104.
-
Purcek, G., Saray, O., Karaman, I., & Haouaoui, M.
(2009).
Microstructural Evolution and Mechanical Response of Equal-Channel Angular Extrusion-Processed Al-40Zn-2Cu Alloy. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.
40A(11), 2772-2783.
-
Niendorf, T., Dadda, J., Canadinc, D., Maier, H. J., & Karaman, I.
(2009).
Monitoring the fatigue-induced damage evolution in ultrafine-grained interstitial-free steel utilizing digital image correlation. Materials Science & Engineering: A.
517(1-2), 225-234.
-
Karaca, H. E., Karaman, I., Basaran, B., Ren, Y., Chumlyakov, Y. I., & Maier, H. J.
(2009).
Magnetic Field-induced Phase Transformation in NiMnColn Magnetic Shape-Memory Alloys-A New Actuation Mechanism with Large Work Output. Advanced Functional Materials.
19(7), 983-998.
-
Niendorf, T., Canadinc, D., Maier, H. J., & Karaman, I.
(2009).
The role of grain size and distribution on the cyclic stability of titanium. Scripta Materialia.
60(5), 344-347.
-
Kireeva, I. V., Pobedennaya, Z. V., Chumlyakov, Y. I., Pons, J., Cesari, E., & Karaman, I.
(2009).
Effect of Orientation on the High-Temperature Superelasticity in Co49Ni21Ga30 Single Crystals. Pis'ma v Zhurnal Tekhnicheskoi Fiziki / Technical Physics Letters.
35(2), 186-189.
-
Chumlyakov, Y. I., Panchenko, E. Y., Ovsyannikov, A. V., Chusov, S. A., Kirillov, V. A., Karaman, I., & Maier, H.
(2009).
High-temperature superelasticity and the shape-memory effect in [001] Co-Ni-Al single crystals. PHYSICS OF METALS AND METALLOGRAPHY.
107(2), 194-205.
-
Kart, H. H., Wang, G., Karaman, I., & Cagin, T.
(2009).
MOLECULAR DYNAMICS STUDY OF THE COALESCENCE OF EQUAL AND UNEQUAL SIZED Cu NANOPARTICLES. International Journal of Modern Physics C: computational physics and physical computation.
20(2), 179-196.
-
KART, H. H., WANG, G., KARAMAN, I., & AIN, T.
(2009).
MOLECULAR DYNAMICS STUDY OF THE COALESCENCE OF EQUAL AND UNEQUAL SIZED Cu NANOPARTICLES. 20(02), 179-196.
-
KART, H. H., WANG, G., KARAMAN, I., & AIN, T.
(2009).
MOLECULAR DYNAMICS STUDY OF THE COALESCENCE OF EQUAL AND UNEQUAL SIZEDCuNANOPARTICLES. 20(02), 179-196.
-
Panchenko, E. Y., Chumlyakov, Y. I., Kireeva, I. V., Ovsyannikov, A. V., Sehitoglu, H., Karaman, I., & Maier, Y.
(2008).
Effect of disperse Ti3N4 particles on the martensitic transformations in titanium nickelide single crystals. 106(6), 577-589.
-
Niklasch, D., Maier, H. J., & Karaman, I.
(2008).
Design and application of a mechanical load frame for in situ investigation of ferromagnetic shape memory alloys by magnetic force microscopy. Review of Scientific Instruments.
79(11), 113701-113701.
-
Niklasch, D., Dadda, J., Maier, H. J., & Karaman, I.
(2008).
Magneto-microstructural coupling during stress-induced phase transformation in Co49Ni21Ga30 ferromagnetic shape memory alloy single crystals. Journal of Materials Science.
43(21), 6890-6901.
-
Chumlyakov, Y. I., Kireeva, I. V., Panchenko, E. Y., Timofeeva, E. E., Pobedennaya, Z. V., Chusov, S. V., ... Kirillov, V. A.
(2008).
High-temperature superelasticity in CoNiGa, CoNiAl, NiFeGa, and TiNi monocrystals. Russian Physics Journal.
51(10), 1016-1036.
-
Niendorf, T., Maier, H. J., Canadinc, D., & Karaman, I.
(2008).
On the Cyclic Stability and Fatigue Performance of Ultrafine-Grained Interstitial-Free Steel under Mean Stress. 378-379, 39-52.
-
Dadda, J., Maier, H. J., Niklasch, D., Karaman, I., Karaca, H. E., & Chumlyakov, Y. I.
(2008).
Pseudoelasticity and cyclic stability in Co49Ni21Ga30 shape-memory alloy single crystals at ambient temperature. 39A(9), 2026-2039.
-
Purcek, G., Saray, O., Karaman, I., & Kucukomeroglu, T.
(2008).
Effect of severe plastic deformation on tensile properties and impact toughness of two-phase Zn-40Al alloy. Materials Science & Engineering: A.
490(1-2), 403-410.
-
Kockar, B., Karaman, I., Kim, J. I., Chumlyakov, Y. J., Sharp, J., & Yu, C.
(2008).
Thermomechanical cyclic response of an ultrafine-grained NiTi shape memory alloy. ACTA MATERIALIA.
56(14), 3630-3646.
-
Karaca, H. E., Karaman, I., Brewer, A., Basaran, B., Chumlyakov, Y. I., & Maier, H. J.
(2008).
Shape memory and pseudoelasticity response of NiMnCoIn magnetic shape memory alloy single crystals. Scripta Materialia.
58(10), 815-818.
-
Niendorf, T., Maier, H. J., Canadinc, D., Yapici, G. G., & Karaman, I.
(2008).
Improvement of the fatigue performance of an ultrafine-grained Nb-Zr alloy by nano-sized precipitates formed by internal oxidation. Scripta Materialia.
58(7), 571-574.
-
Niendorf, T., Canadinc, D., Maier, H. J., & Karaman, I.
(2008).
The role of heat treatment on the cyclic stress-strain response of ultrafine-grained interstitial-free steel. International Journal of Fatigue.
30(3), 426-436.
-
Canadinc, D., Maier, H. J., Haouaoui, M., & Karaman, I.
(2008).
On the cyclic stability of nanocrystalline copper obtained by powder consolidation at room temperature. Scripta Materialia.
58(4), 307-310.
-
Niendorf, T., Canadinc, D., Maier, H. J., Karaman, I., & Yapici, G. G.
(2007).
Micro structure-mechanical property relationships in ultrafine-grained NbZr. ACTA MATERIALIA.
55(19), 6596-6605.
-
Kireeva, I. V., Chumlyakov, Y. I., Pobedennaya, Z. V., Karaman, I., & Kalashnikov, I. S.
(2007).
Orientation dependence of the shape memory effect and superelasticity in Co49Ni21Ga30 ferromagnetic single crystals. Doklady Physics.
52(9), 488-492.
-
Canadinc, D., Dadda, J., Maier, H. J., Karaman, I., Karaca, H. E., & Chumlyakov, Y. I.
(2007).
On the role of the cooling rate and crystallographic orientation on the shape memory properties of CoNiAl single crystals under compression. Smart Materials and Structures.
16(4), 1006-1015.
-
Karaca, H. E., Karaman, I., Basaran, B., Lagoudas, D. C., Chumlyakov, Y. I., & Maier, H. J.
(2007).
On the stress-assisted magnetic-field-induced phase transformation in Ni2MnGa ferromagnetic shape memory alloys. 55(13), 4253-4269.
-
Yapici, G. G., Beyerlein, I. J., Karaman, I., & Tome, C. N.
(2007).
Tension-compression asymmetry in severely deformed pure copper. ACTA MATERIALIA.
55(14), 4603-4613.
-
Panchenko, E. Y., Chumlyakov, Y. I., Ovsyannikov, A. V., & Karaman, I.
(2007).
High-temperature superelasticity during B2-L1(0) martensite transformations in Co40Ni33Al27 crystals. 33(7), 556-559.
-
Dadda, J., Canadinc, D., Maier, H. J., Karaman, I., Karaca, H. E., & Chumlyakov, Y. I.
(2007).
Stress-strain-temperature behaviour of [001] single crystals of Co49Ni21Ga30 ferromagnetic shape memory alloy under compression. Philosophical Magazine.
87(16-17), 2313-2322.
-
Kiefer, B., Karaca, H. E., Lagoudas, D. C., & Karaman, I.
(2007).
Characterization and modeling of the magnetic field-induced strain and work output in Ni2MnGa magnetic shape memory alloys. 312(1), 164-175.
-
Karaman, I., Basaran, B., Karaca, H. E., Karsilayan, A. I., & Chumlyakov, Y. I.
(2007).
Energy harvesting using martensite variant reorientation mechanism in a NiMnGa magnetic shape memory alloy. Applied Physics Letters.
90(17), 172505-172505.
-
Mathaudhu, S. N., Hartwig, K. T., & Karaman, I.
(2007).
Consolidation of blended powders by severe plastic deformation to form amorphous metal matrix composites. Journal of Non-Crystalline Solids.
353(2), 185-193.
-
Haouaoui, M., Karaman, I., & Maier, H. J.
(2006).
Flow stress anisotropy and Bauschinger effect in ultrafine grained copper. ACTA MATERIALIA.
54(20), 5477-5488.
-
Karaca, H. E., Karaman, I., Basaran, B., Lagoudas, D. C., Chumlyakov, Y. I., & Maier, H. J.
(2006).
One-way shape memory effect due to stress-assisted magnetic field-induced phase transformation in Ni2MnGa magnetic shape memory alloys. 55(9), 803-806.
-
Yapici, G. G., Karaman, I., & Maier, H. J.
(2006).
Mechanical flow anisotropy in severely deformed pure titanium. Materials Science & Engineering: A.
434(1-2), 294-302.
-
Niendorf, T., Canadinc, D., Maier, H. J., Karaman, I., & Sutter, S. G.
(2006).
On the fatigue behavior of ultrafine-grained interstitial-free steel. 97(10), 1328-1336.
-
Dadda, J., Maier, H. J., Karaman, I., Karaca, H. E., & Chumlyakov, Y. I.
(2006).
Pseudoelasticity at elevated temperatures in [001] oriented CO49Ni21Ga30 single crystals under compression. Scripta Materialia.
55(8), 663-666.
-
Yapici, G. G., Karaman, I., & Luo, Z.
(2006).
Mechanical twinning and texture evolution in severely deformed Ti-6Al-4V at high temperatures. ACTA MATERIALIA.
54(14), 3755-3771.
-
Karaman, I., Karaca, H. E., Basaran, B., Lagoudas, D. C., Chumlyakov, Y. I., & Maier, H. J.
(2006).
Stress-assisted reversible magnetic field-induced phase transformation in Ni2MnGa magnetic shape memory alloys. 55(4), 403-406.
-
Kockar, B., Karaman, I., Kim, J. I., & Chumlyakov, Y.
(2006).
A method to enhance cyclic reversibility of NiTiHf high temperature shape memory alloys. Scripta Materialia.
54(12), 2203-2208.
-
Maier, H. J., Gabor, P., Gupta, N., Karaman, I., & Haouaoui, M.
(2006).
Cyclic stress-strain response of ultrafine grained copper. International Journal of Fatigue.
28(3), 243-250.
-
Karaca, H. E., Karaman, I., Basaran, B., Chumlyakov, Y. J., & Maier, H. J.
(2006).
Magnetic field and stress induced martensite reorientation in NiMnGa ferromagnetic shape memory alloy single crystals. ACTA MATERIALIA.
54(1), 233-245.
-
Karaman, I., Kulkarni, A. V., & Luo, Z. P.
(2005).
Transformation behaviour and unusual twinning in a NiTi shape memory alloy ausformed using equal channel angular extrusion. Philosophical Magazine.
85(16), 1729-1745.
-
Chumlyakov, Y. I., Kireeva, I. V., Karaman, I., Panchenko, E. Y., Zakharova, E. G., Tverskov, A. V., ... Kirillov, V. A.
(2004).
Orientational dependence of shape memory effects and superelasticity in CoNiGa, NiMnGa, CoNiAl, FeNiCoTi, and TiNi single crystals. Russian Physics Journal.
47(9), 893-911.
-
Yapici, G. G., Karaman, I., Luo, Z. P., Maier, H. J., & Chumlyakov, Y. I.
(2004).
Microstructural refinement and deformation twinning during severe plastic deformation of 316L stainless steel at high temperatures. Journal of Materials Research.
19(8), 2268-2278.
-
Karaca, H. E., Karaman, I., Chumlyakov, Y. I., Lagoudas, D. C., & Zhang, X.
(2004).
Compressive response of a single crystalline CoNiAl shape memory alloy. Scripta Materialia.
51(3), 261-266.
-
Karaman, I., Robertson, J., Im, J. T., Mathaudhu, S. N., Luo, Z. P., & Hartwig, K. T.
(2004).
The effect of temperature and extrusion speed on the consolidation of zirconium-based metallic glass powder using equal-channel angular extrusion. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.
35A(1), 247-256.
-
Yapici, G. G., Karaman, I., Luo, Z. P., & Rack, H.
(2003).
Microstructure and mechanical properties of severely deformed powder processed Ti-6Al-4V using equal channel angular extrusion. Scripta Materialia.
49(10), 1021-1027.
-
Karaca, H. E., Karaman, I., Lagoudas, D. C., Maier, H. J., & Chumlyakov, Y. I.
(2003).
Recoverable stress-induced martensitic transformation in a ferromagnetic CoNiAl alloy. Scripta Materialia.
49(9), 831-836.
-
Karaman, I., Karaca, H. E., Maier, H. J., & Luo, Z. P.
(2003).
The effect of severe marforming on shape memory characteristics of a Ti-rich NiTi alloy processed using equal channel angular extrusion. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.
34A(11), 2527-2539.
-
Canadinc, D., Karaman, I., Sehitoglu, H., Chumlyakov, Y. I., & Maier, H. J.
(2003).
The role of nitrogen on the deformation response of Hadfield steel single crystals. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.
34A(9), 1821-1831.
-
Sehitoglu, H., Hamilton, R., Canadinc, D., Zhang, X. Y., Gall, K., Karaman, I., Chumlyakov, Y., & Maier, H. J.
(2003).
Detwinning in NiTi alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.
34(1), 5-13.
-
Panchenko, E. Y., Kireeva, I. V., Chumlyakov, Y. I., Aksenov, V. B., Efimenko, S. P., Karaman, I., & Sehitogly, H.
(2003).
Features of thermoelastic martensitic transformations in [001] titanium-nickel single crystals. Doklady Physics.
48(1), 34-37.
-
Panchenko, E. Y., Kireeva, I. V., Chumlyakov, Y. I., Aksenov, V. B., Efimenko, S. P., Karaman, I., & Sehitogly, X.
(2003).
Peculiarity of thermoelastic martensitic transformations in [001] titanium-nickel single crystals. Доклады Академии Наук / Doklady Biological Sciences.
388(1), 51-56.
-
Zakharova, E. G., Kireeva, I. V., Chumlyakov, Y. I., Efimenko, S. P., Sehitoglu, H., & Karaman, I.
(2002).
Deformation mechanisms and strain hardening of Hadfield-steel single crystals alloyed with aluminum. Doklady Physics.
47(7), 515-517.
-
Karaman, I., Sehitoglu, H., Chumlyakov, Y. I., & Maier, H. J.
(2002).
The deformation of low-stacking fault-energy austenitic steels. 54(7), 31-37.
-
Chumlyakov, Y. u., Kireeva, I., Zakharova, E., Luzginova, N., Sehitoglu, H., & Karaman, I.
(2002).
Strain Hardening and Fracture of Austenitic Steel Single Crystals with High Concentration of Interstitial Atoms. Russian Physics Journal.
45(3), 274-284.
-
Zakharova, E. G., Kireeva, I. V., Chumlyakov, Y. I., Efimenko, S. P., Sehitoglu, K., & Karaman, I.
(2002).
Mechanisms of deformation and strain hardening of hadfield steel single crystals alloyed with aluminum. Доклады Академии Наук / Doklady Biological Sciences.
385(3), 328-332.
-
Karaman, I., Sehitoglu, H., Maier, H. J., & Chumlyakov, Y. I.
(2001).
Competing mechanisms and modeling of deformation in austenitic stainless steel single crystals with and without nitrogen. ACTA MATERIALIA.
49(19), 3919-3933.
-
Gall, K., Sehitoglu, H., Anderson, R., Karaman, I., Chumlyakov, Y. I., & Kireeva, I. V.
(2001).
On the mechanical behavior of single crystal NiTi shape memory alloys and related polycrystalline phenomenon. 317(1-2), 85-92.
-
Sehitoglu, H., Jun, J., Zhang, X., Karaman, I., Chumlyakov, Y., Maier, H. J., & Gall, K.
(2001).
Shape memory and pseudoelastic behavior of 51.5%Ni-Ti single crystals in solutionized and overaged state. 49(17), 3609-3620.
-
Sehitoglu, H., Karaman, I., Zhang, X., Viswanath, A., Chumlyakov, Y., & Maier, H. J.
(2001).
Straintemperature behavior of NiTiCu shape memory single crystals. ACTA MATERIALIA.
49(17), 3621-3634.
-
Sehitoglu, H., Karaman, I., Zhang, X. Y., Chumlyakov, Y., & Maier, H. J.
(2001).
Deformation of FeNiCoTi shape memory single crystals. Scripta Materialia.
44(5), 779-784.
-
Sehitoglu, H., Karaman, I., Zhang, X., Kim, H., Chumlyakov, Y., Maier, H. J., & Kireeva, I.
(2001).
Deformation of NiTiCu shape memory single crystals in compression. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.
32(3), 477-489.
-
Karaman, I., Sehitoglu, H., Chumlyakov, Y. I., Maier, H. J., & Kireeva, I. V.
(2001).
The effect of twinning and slip on the Bauschinger effect of Hadfield steel single crystals. 32(3A), 695-706.
-
Karaman, I., Sehitoglu, H., Chumlyakov, Y. I., Maier, H. J., & Kireeva, I. V.
(2001).
Extrinsic stacking faults and twinning in Hadfield manganese steel single crystals. 44(2), 337-343.
-
Chumlyakov, Y. I., Kireeva, I. V., Litvinova, E. I., Zakharova, E. G., Luzginova, N. V., Sehitoglu, H., & Karaman, I.
(2000).
Strain hardening in single crystals of Hadfield steel. PHYSICS OF METALS AND METALLOGRAPHY.
90(SUPPL. 1), S1-S17.
-
Chumlyakov, Y. I., Kireeva, I. V., Litvinova, E. I., Zakharova, E. G., Luzginova, N. V., Efimenko, S. P., Sehitoglu, H., & Karaman, I.
(2000).
Twinning in Hadfield steel single crystals. Доклады Академии Наук / Doklady Biological Sciences.
371(1), 45-48.
-
Sehitoglu, H., Karaman, I., Anderson, R., Zhang, X., Gall, K., Maier, H. J., & Chumlyakov, Y.
(2000).
Compressive response of NiTi single crystals. ACTA MATERIALIA.
48(13), 3311-3326.
-
Karaman, I., Sehitoglu, H., Beaudoin, A. J., Chumlyakov, Y. I., Maier, H. J., & Tome, C. N.
(2000).
Modeling the deformation behavior of Hadfield steel single and polycrystals due to twinning and slip. 48(9), 2031-2047.
-
Karaman, I., Sehitoglu, H., Gall, K., Chumlyakov, Y. I., & Maier, H. J.
(2000).
Deformation of single crystal Hadfield steel by twinning and slip. 48(6), 1345-1359.
-
Andrews, S. D., Sehitoglu, H., & Karaman, I.
(2000).
Constriction energy in the presence of a solute field. Journal of Applied Physics.
87(5), 2194-2203.
-
Chumlyakov, Y. I., Kireeva, I. V., Litvinova, E. I., Zakharova, E. G., Luzginova, N. V., Efimenko, S. P., Seihitoglu, H., & Karaman, I.
(2000).
Twinning in Gadfield-steel single crystals. Doklady Physics.
45(3), 101-104.
-
Gall, K., Sehitoglu, H., Chumlyakov, Y. I., Zuev, Y. L., & Karaman, I.
(1998).
The role of coherent precipitates in martensitic transformations in single crystal and polycrystalline Ti-50.8at%Ni. Scripta Materialia.
39(6), 699-705.
-
Karaman, I., Sehitoglu, H., Gall, K., & Chumlyakov, Y. I.
(1998).
On the deformation mechanisms in single crystal Hadfield manganese steels. Scripta Materialia.
38(6), 1009-1015.
-
Karaman, I., Sehitoglu, H., Maier, H. J., & Balzer, M.
(1998).
Stress-state effects on the stress-induced martensitic transformation of carburized 4320 steels. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.
29(2), 427-437.
-
Uar, N., Karaman, I., & Dzgn, B.
(1995).
Orientation and temperature dependence of slip systems in Cd single crystals. Acta Metallurgica et Materialia.
43(5), 2103-2105.
-
Zhu, R., Li, S., Song, M., Karaman, I., & Arroyave, R.
Phase constitution effect on the ductility of low alloy multiphase transformation induced plasticity steels. Materials Science & Engineering: A.
569, 137-143.
-
Santamarta, R., Arroyave, R., Pons, J., Evirgen, A., Karaman, I., Karaca, H. E., & Noebe, R. D.
TEM study of structural and micro structural characteristics of a precipitate phase in Ni-rich Ni-Ti-Hf and Ni-Ti-Zr shape memory alloys. ACTA MATERIALIA.
61(16), 6191-6206.
-
Demblon, A., Mabe, J. H., & Karaman, I.
(2024).
Compositional effects on strain-controlled actuation fatigue of NiTiHf high temperature shape memory alloys. Scripta Materialia.
242.
-
chapter
-
Kulkarni, A. V., Karaman, I., Karaca, H. E., & Luo, Z. P.
(2006).
Ausforming and Marforming of NiTi Shape Memory Alloys Using Severe Plastic Deformation. Altan, B. S. (Eds.),
Severe Plastic Deformation Toward Bulk Production of Nanostructured Materials.
(pp. 115-135).
Nova Publishers.
-
Kulkarni, A. V., Karaman, I., Karaca, H. E., & Luo, Z. P.
(2006).
Ausforming and Marforming of NiTi Shape Memory Alloys Using Severe Plastic Deformation. Altan, B. S. (Eds.),
Severe Plastic Deformation Toward Bulk Production of Nanostructured Materials.
(pp. 115-135).
Nova Publishers.
-
conference paper
-
Sharar, D. J., Wilson, A. A., Leff, A., Smith, A., Atli, K. C., Elwany, A., Arroyave, R., & Karaman, I.
(2020).
Additively Manufacturing Nitinol as a Solid-State Phase Change Material. InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITHERM.
821-826.
-
AbdelGawad, M., Mansoor, B., Vaughan, M. W., & Karaman, I.
(2020).
Effect of 2 wt% Ag Addition on Corrosion Properties of ZK40 for Biodegradable Applications. Minerals, Metals and Materials Series.
243-252.
-
Haghgouyan, B., Young, B., Karaman, I., & Lagoudas, D. C.
(2019).
Fracture Toughness of Martensitic NiTiHf High-Temperature Shape Memory Alloy. Proceedings of SPIE.
109680a-109680a-6.
-
Nasim, W., Herrington, J. S., Benzerga, A. A., Wang, J., & Karaman, I.
(2019).
Inverse Optimization to Design Processing Paths to Tailor Formability of Mg Alloys. Minerals, Metals and Materials Series.
239-246.
-
Haghgouyan, B., Karaman, I., Jape, S., Solomou, A., & Lagoudas, D. C.
(2018).
CRACK GROWTH BEHAVIOR IN NITI SHAPE MEMORY ALLOYS UNDER MODE-I ISOTHERMAL LOADING: EFFECT OF STRESS STATE. v002t02a013-v002t02a013.
-
Monroe, J. A., McAllister, J. S., Content, D. S., Zgarba, J., Huerta, X., & Karaman, I.
(2018).
Negative Thermal Expansion ALLVAR Alloys for Telescopes. Proceedings of SPIE.
107060r.
-
Joy, J. K., Solomou, A., Baxevanis, T., Karaman, I., & Lagoudas, D. C.
(2018).
Micromechanical Modeling of Precipitation Hardened NiTiHf. Materials Science Forum.
147-156.
-
Haghgouyan, B., Jape, S., Hayrettin, C., Baxevanis, T., Karaman, I., & Lagoudas, D. C.
(2018).
Experimental and Numerical Investigation of the Stable Crack Growth Regime under Pseudoelastic Loading in Shape Memory Alloys. Proceedings of SPIE.
1059612.
-
Malik, J., Nasim, W., Mansoor, B., Karaman, I., Erdeniz, D., Dunand, D. C., & Seidman, D. N.
(2018).
Equal Channel Angular Pressing of a Newly Developed Precipitation Hardenable Scandium Containing Aluminum Alloy. Minerals, Metals and Materials Series.
423-429.
-
Haghgouyan, B., Hayrettin, C., Baxevanis, T., Karaman, I., & Lagoudas, D. C.
(2018).
On the Experimental Evaluation of the Fracture Toughness of Shape Memory Alloys. Minerals, Metals and Materials Series.
565-573.
-
Vaughan, M. W., Seitz, J. M., Eifler, R., Maier, H. J., & Karaman, I.
(2017).
Combined Effects of Grain Size Refinement and Dynamic Precipitation on Mechanical Properties of a New Magnesium Alloy. Minerals, Metals and Materials Series.
43-51.
-
Basu, S., Dogan, E., Kondori, B., Karaman, I., & Benzerga, A. A.
(2017).
Ductility Enhancement in Mg Alloys by Anisotropy Engineering. Minerals, Metals and Materials Series.
153-158.
-
Hayrettin, C., Jape, S., Baxevanis, T., Karaman, I., Ozguc, S., & Lagoudas, D. C.
(2017).
Experimental determination of crack growth rate during thermal cycling on NiTi shape memory alloys. 90.
-
Huang, Y. J., Liu, J., Hu, Q. D., Liu, Q. H., Karaman, I., & Li, J. G.
(2016).
Applications of the directional solidification in magnetic shape memory alloys. IOP Conference Series: Materials Science and Engineering.
012029-012029.
-
Arroyave, R., Li, S., Zhu, R., & Karaman, I.
(2015).
ALLOY DESIGN STRATEGIES THROUGH COMPUTATIONAL THERMODYNAMICS AND KINETICS APPROACHES. 461-470.
-
Dogan, E., Vaughan, M. W., Karaman, I., Proust, G., Ayoub, G., & Benzerga, A. A.
(2015).
MICROSTRUCTURAL DESIGN OF Mg ALLOYS FOR LIGHTWEIGHT STRUCTURAL APPLICATIONS. 225-233.
-
Elwany, A., Karaman, I., & Arroyave, R.
(2015).
Material certification through a synergistic experimental monitoring and microstructure modeling approach. 106-109.
-
Sauceda, D., Arroyave, R., Chaudhary, N., Karaman, I., Youssef, S., Dima, A., Aramayo, R., & Perez, R.
(2015).
Materials data curation: Introduction proceedings. 1283-1286.
-
Bruno, N. M., Karaman, I., Ross, J. H., Huang, Y. J., & Li, J. G.
(2015).
THE TUNABLE MICROSTRUCTURE AND ITS INFLUENCE ON THE GIANT MAGNETOCALORIC EFFECT IN MAGNETIC SHAPE MEMORY ALLOYS. 139-147.
-
Chumlyakov, Y., Kireeva, I., Panchenko, E., Timofeeva, E., Kretinina, I., Kuts, O., Karaman, I., & Maier, H. J.
(2014).
Shape Memory Effect and Superelasticity in Single Crystals of High-Strength Ferromagnetic Alloys. Advanced Materials Research.
15-22.
-
Dogan, E., Vaughan, M. W., & Karaman, I.
(2014).
Effect of Tensile Twinning on Low Temperature Shear Formability of Mg-3Al-1Zn Alloy. Advanced Materials Research.
108-113.
-
Al-Maharbi, M., & Karaman, I.
(2014).
Prediction of Flow Stress Anisotropy and Tension Compression Asymmetry of Hot Rolled AZ31B Mg Alloy. Advanced Materials Research.
178-184.
-
Dogan, E., Vaughan, M. W., Hayrettin, C., Karaman, I., & Ayoub, G.
(2014).
The role of deformation modes on ductility and dynamic recrystallization behavior of AZ31 Mg alloy at low temperatures. Magnesium Technology -Symposium-.
155-160.
-
Tabesh, M., Rohmer, J., Boyd, J. G., Lagoudas, D. C., Atli, K. C., Franco, B. E., & Karaman, I.
(2013).
DESIGN OF A MULTIPLE-ACTUATION SHAPE MEMORY ALLOY PIPE COUPLER: MATERIAL DEVELOPMENT AND CHARACTERIZATION. 1683-1694.
-
Niendorf, T., Dadda, J., Lackmann, J., Monroe, J. A., Karaman, I., Panchenko, E., Karaca, H. E., & Maier, H. J.
(2013).
Tension - Compression Asymmetry in Co49Ni21Ga30 High-Temperature Shape Memory Alloy Single Crystals. Materials Science Forum.
82-+.
-
Tabesh, M., Atli, K. C., Rohmer, J., Franco, B. E., Karaman, I., Boyd, J. G., & Lagoudas, D. C.
(2012).
Design of shape memory alloy pipe couplers: modeling and experiments. Proceedings of SPIE.
83430j-83430j-18-83430J-18.
-
Alsaran, A., Purcek, G., Hacisalihoglu, I., Vangolu, Y., Bayrak, O., Karaman, I., & Celik, A.
(2011).
Hydroxyapatite production on ultrafine-grained pure titanium by micro-arc oxidation and hydrothermal treatment. Surface and Coatings Technology.
S537-S542.
-
Haldar, K., Lagoudas, D. C., Basaran, B., & Karaman, I.
(2010).
CONSTITUTIVE MODELING OF MAGNETO-THERMO-MECHANICAL RESPONSE OF FIELD-INDUCED PHASE TRANSFORMATIONS IN NiMnCoIn MAGNETIC SHAPE MEMORY ALLOYS. 193-201.
-
Kumar, P. K., Desai, U., Chatzigeorgiou, G., Lagoudas, D. C., Monroe, J., Karaman, I., Noebe, R., & Bigelow, G.
(2010).
Experiment and modeling of simultaneous creep, plasticity and transformation of high temperature shape memory alloys during cyclic actuation. Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference.
-
Saray, O., Purcek, G., & Karaman, I.
(2010).
PRINCIPLES OF EQUAL-CHANNEL ANGULAR SHEET EXTRUSION (ECASE): APPLICATION TO IF-STEEL SHEETS. REVIEWS ON ADVANCED MATERIALS SCIENCE.
42-51.
-
Niendorf, T., Rubitschek, F., Maier, H. J., Canadinc, D., & Karaman, I.
(2010).
On the fatigue crack growth-microstructure relationship in ultrafine-grained interstitial-free steel. Journal of Materials Science.
4813-4821.
-
Al-Maharbi, M., Foley, D., Karaman, I., Beyerlein, I., Hartwig, K. T., Kecskes, L. J., & Mathaudhu, S.
(2010).
Importance of Crystallographic Texture of AZ31B on Flow Stress Anisotropy and Tension-Compression Asymmetry. Magnesium Technology -Symposium-.
445-+.
-
Foley, D. C., Al-Maharbi, M., Karamar, I., Hartwig, T., Kecskes, L. J., & Mathaudhu, S.
(2010).
MECHANICAL BEHAVIOR OF AZ31 DUE TO TEXTURE AND MICROSTRUCTURE. Magnesium Technology -Symposium-.
451-+.
-
Kumar, P. K., Desai, U., Monroe, J., Lagoudas, D. C., Karaman, I., Noebe, R., & Bigelow, G.
(2010).
Phase Transformation and Creep Behavior in Ti50Pd30Ni20 High Temperature Shape Memory Alloy in Compression. Proceedings of SPIE.
76440q-76440q-7.
-
Haldar, K., Lagoudas, D. C., Basaran, B., & Karaman, I.
(2010).
Constitutive Modeling of Magneto-Mechanical Coupling Response of Magnetic Field-Induced Phase Transformations in NiMnCoIn Magnetic Shape Memory Alloys. Proceedings of SPIE.
764410-764410-9.
-
Kumar, P. K., Desai, U., Monroe, J., Lagoudas, D. C., Karaman, I., Noebe, R., & Bigelow, G.
(2010).
Phase transformation and creep behavior in Ti50Pd30Ni20 high temperature shape memory alloy in compression. 76440Q-76440Q-7.
-
Yapici, G. G., & Karaman, I.
(2009).
Common trends in texture evolution of ultra-fine-grained hcp materials during equal channel angular extrusion. Materials Science & Engineering: A.
78-81.
-
Niendorf, T., Maier, H. J., Canadinc, D., & Karaman, I.
(2009).
Cyclic stability of ultrafine-grained interstitial-free steel at elevated temperatures. Materials Science & Engineering: A.
160-162.
-
Lagoudas, D. C., Basaran, B., Haldar, K., & Karaman, I.
(2009).
CONSTITUTIVE MODELING OF MAGNETIC FIELD-INDUCED PHASE TRANSFORMATION IN NIMNCOIN MAGNETIC SHAPE MEMORY ALLOYS. 317-324.
-
Phillips, F. R., Zheng, H., Lagoudas, D. C., & Karaman, I.
(2009).
SIZE EFFECT ON THE PHASE TRANSFORMATION OF IN-21AT%TL NANOWIRES. 327-333.
-
Dadda, J., Maier, H. J., & Karaman, I.
(2008).
High-temperature Pseudoelasticity of Co49Ni21Ga30 Shape Memory Alloy Single Crystals under Compression. 659-+.
-
Niendorf, T., Marten, T., Maier, H. J., & Karaman, I.
(2008).
The effect of texture on the fatigue properties of ultrafine-grained interstitial-free steel. Materials Science Forum.
864-869.
-
Kart, S. O., Uludogan, M., Karaman, I., & Cagin, T.
(2008).
DFT studies on structure, mechanics and phase behavior of magnetic shape memory alloys: Ni(2)MnGa. Physica Status Solidi A: Applications and Materials Science.
1026-1035.
-
Chumlyakov, Y., Panchenko, E., Kireeva, I., Karaman, I., Sehitoglu, H., Maier, H. J., Tverdokhlebova, A., & Ovsyannikov, A.
(2008).
Orientation dependence and tension/compression asymmetry of shape memory effect and superelasticity in ferromagnetic Co40Ni33Al27, Co49Ni21Ga30 and Ni54Fe19Ga27 single crystals. Materials Science & Engineering: A.
95-100.
-
Ma, J. i., Karaman, I., & Maier, H. J.
(2008).
Low-cycle superelastic response of a titanium-niobium shape memory alloy. Proceedings of SPIE.
692914-692914-9.
-
Padula, S., Gaydosh, D. J., Noebe, R. D., Bigelow, G. S., Garg, A., Lagoudas, D., Karaman, I., & Atli, K. C.
(2008).
Influence of test procedures on the thermo mechanical properties of a 55NiTi shape memory alloy. Proceedings of SPIE.
692912-692912-11.
-
Niendorf, T., Canadinc, D., Maier, H. J., & Karaman, I.
(2007).
On the microstructural stability of ultrafine-grained interstitial-free steel under cyclic loading. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.
1946-1955.
-
Griffin, R., Karaman, I., Ma, J. i., Froyd, J., & Grunlan, J.
(2007).
Development Of A Nano Filled Composite Experiment For A Freshman Class. 12.516.1-12.516.7.
-
Kockar, B., Karaman, I., Kulkarni, A., Chumlyakov, Y., & Kireeva, I. V.
(2007).
Effect of severe ausforming via equal channel angular extrusion on the shape memory response of a NiTi alloy. Journal of Nuclear Materials.
298-305.
-
Purcek, G., Karaman, I., Yapici, G. G., Al-Maharbi, M., Kucukomeroglu, T., & Saray, O.
(2007).
Enhancement in mechanical behavior and wear resistance of severe plastically deformed two-phase Zn-Al alloys. 332-338.
-
Purcek, G., Karaman, I., Yapici, G. G., Al-Maharbi, M., Kuukomeroglu, T., & Saray, O.
(2007).
Enhancement in mechanical behavior and wear resistance of severe plastically deformed two-phase Zn-Al alloys. 332-338.
-
Karaman, I., Haouaoui, M., & Maier, H. J.
(2007).
Nanoparticle consolidation using equal channel angular extrusion at room temperature. Journal of Materials Science.
1561-1576.
-
Yu, C., Lei, C., Mahapatra, R., Sharp, J., & Karaman, I.
(2007).
Equal channel angular extrusion (ECAE) of Ni-Ti based shape memory alloy systems. Materials Science Forum.
3195-+.
-
Griffin, R., Karaman, I., Ji, M., Grulan, J., & Froyd, J.
(2007).
Development of a nano-filled composite experiment for a freshman class. ASEE Annual Conference and Exposition, Conference Proceedings.
-
Panchenko, E. Y., Tverdokhlebova, A. V., Chumlyakov, Y. I., Karaman, I., & Sehitoglu, H.
(2006).
Thermoelastic martensitic transformations, shape memory effect, and superelasticity in Ni54 Fe19 Ga27 ferromagnetic single crystals. Bulletin of the Russian Academy of Sciences: Physics.
1549-1553.
-
Meyer, D., Maier, H. J., Dadda, J., Karaman, I., & Karaca, H. E.
(2006).
Thermally and stress-induced martensitic transformation in Co-Ni-Al ferromagnetic shape memory alloy single crystals. Materials Science & Engineering: A.
875-878.
-
Gabor, P., Maier, H. J., & Karaman, I.
(2006).
Effect of strain rate on fatigue behavior of ultrafine grained copper. 209-210.
-
Maier, H. J., Gabor, P., & Karaman, I.
(2005).
Cyclic stress-strain response and low-cycle fatigue damage in ultrafine grained copper. Materials Science & Engineering: A.
457-461.
-
Karaman, I., Yapici, G. G., Chumlyakov, Y. I., & Kireeva, I. V.
(2005).
Deformation twinning in difficult-to-work alloys during severe plastic deformation. Materials Science & Engineering: A.
243-247.
-
Froyd, J., Creasy, T., Karaman, I., Teizer, W., & Caso, R.
(2004).
Undergraduate educational components for nanoscale issues in manufacturing. ASEE Annual Conference Proceedings.
14445-14456.
-
Haouaoui, M., Karaman, I., Maier, H. J., & Hartwig, K. T.
(2004).
Microstructure evolution and mechanical behavior of bulk copper obtained by consolidation of micro- and nanopowders using equal-channel angular extrusion. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.
2935-2949.
-
Yapici, G. G., Karaman, I., Luo, Z. P., & Chumlyakov, Y. I.
(2004).
Grain refinement and mechanical twinning in severely deformed AISI 316L stainless steel at high temperatures. 291-296.
-
Yapici, G. G., Karaman, I., & Luo, Z. P.
(2004).
Microstructure and mechanical properties of severely deformed TI-6AL-4V and TI-6AL-4V/TiC metal matrix composite. 433-438.
-
Kulkarni, A. V., Karaman, I., Luo, Z. P., & Chumlyakov, Y. I.
(2004).
Transformation temperatures and microstructural evolution of an ausformed NiTi shape memory alloy using equal channel angular extrusion. 297-302.
-
Kireeva, I. V., Luzginova, N. V., Chumlyakov, Y. I., Karaman, I., & Lichter, B. D.
(2004).
Plastic deformation of nitrogen-containing austenitic stainless steel single crystals with low stacking fault energy. 223-230.
-
Kireeva, I. V., Chumlyakov, Y. I., Zakharova, E. G., & Karaman, I.
(2004).
Shape memory effect and superelasticity in single-phase nickel titanium single crystals. 175-183.
-
Zakharova, E. G., Kireeva, I. V., Chumlyakov, Y. I., Shul'mina, A. A., Sehitoglu, H., & Karaman, I.
(2004).
The effect of aluminium on mechanical properties and deformation mechanisms of hadfield steel single crystals. 243-250.
-
Zakharova, E. G., Kireeva, I. V., Chumlyakov, Y. I., Shul'mina, A. A., Sehitoglu, H., & Karaman, I.
(2004).
The effect of aluminium on mechanical properties and deformation mechanisms of hadfield steel single crystals. 243-250.
-
Chumlyakov, Y. I., Panchenko, E. Y., Aksenov, V. B., Kireeva, I. V., Kuksa, M. P., Karaman, I., & Sehitoglu, H.
(2004).
The shape memory effect and superelasticity in Ti-Ni single crystals with one variant of dispersed particles. 21-28.
-
Hartwig, K. T., Karaman, I., Haouaoui, M., & Mathaudhu, S. N.
(2004).
Consolidation of Cu and amorphous Zr-based powders by severe plastic deformation. 91-100.
-
Haouaoui, M., & Karaman, I.
(2003).
Nanostructured bulk Cu obtained by consolidation of Cu particles using equal channel angular extrusion. 125-138.
-
Chumlyakov, Y. I., Panchenko, E. Y., Kireeva, I. V., Shaporov, D. A., Aksenov, V. B., Sehitoglu, H., ... Maier, H.
(2003).
The shape memory effect and superelasticity in nickel-titanium single crystals aged under applied stress. 799-802.
-
Mathaudhu, S. N., Im, J. T., Barber, R. E., Anderson, I. E., Karaman, I., & Hartwig, K. T.
(2003).
Progress in consolidation of amorphous Zr-based powder into bulk metallic glass. MRS Online Proceedings Library.
191-198.
-
Robertson, J., Im, J. T., Karaman, I., Hartwig, K. T., & Anderson, I. E.
(2003).
Consolidation of amorphous copper based powder by equal channel angular extrusion. Journal of Non-Crystalline Solids.
144-151.
-
Sehitoglu, H., Zhang, X. Y., Chumlyakov, Y. I., Karaman, I., Gall, K., & Maier, H. J.
(2002).
Observations on stress-induced transformations in NITI alloys. 103-109.
-
Hartwig, K. T., Mathaudhu, S. N., Maier, H. J., & Karaman, I.
(2002).
Hardness and microstructure changes in severely deformed and recrystallized tantalum. 151-160.
-
Sehitoglu, H., Anderson, R., Karaman, I., Gall, K., & Chumlyakov, Y.
(2001).
Cyclic deformation behavior of single crystal NiTi. Materials Science & Engineering: A.
67-74.
-
Sharar, D. J., Wilson, A. A., Leff, A., Smith, A., Atli, K. C., Elwany, A., Arroyave, R., & Karaman, I.
(2020).
Additively Manufacturing Nitinol as a Solid-State Phase Change Material. InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITHERM.
821-826.
-
institutional repository document
-
Mahmoudi, M., Tapia, G., Karayagiz, K., Franco, B., Ma, J. i., Arroyave, R., Karaman, I., & Elwany, A.
(2018).
Multivariate Calibration and Experimental Validation of a 3D Finite Element Thermal Model for Laser Powder Bed Fusion Metal Additive Manufacturing. Integrating Materials and Manufacturing Innovation.
-
Mahmoudi, M., Tapia, G., Karayagiz, K., Franco, B., Ma, J. i., Arroyave, R., Karaman, I., & Elwany, A.
(2018).
Multivariate Calibration and Experimental Validation of a 3D Finite Element Thermal Model for Laser Powder Bed Fusion Metal Additive Manufacturing. Integrating Materials and Manufacturing Innovation.
-
patent
-
Ma, J. i., & Karaman, I.
(2017).
Self-adaptive, ultra-low elastic modulus shape memory alloys
-
Ma, J. i., & Karaman, I.
(2017).
Self-adaptive, ultra-low elastic modulus shape memory alloys
editor of
-
book
-
TMS.
(2016).
Proceedings of the TMS Middle East Mediterranean Materials Congress on Energy and Infrastructure Systems (MEMA 2015)
Karaman, I., Arróyave, R., & Masad, E. (Eds.),
Springer International Publishing.
-
TMS.
(2016).
Proceedings of the TMS Middle East Mediterranean Materials Congress on Energy and Infrastructure Systems (MEMA 2015)
Karaman, I., Arróyave, R., & Masad, E. (Eds.),
Springer International Publishing.
Research
principal investigator on
- Additive Manufacturing of High Strength Steels for Lightweighting and Location-Specific Fragmentation awarded by United States Air Force - (Arlington, Virginia, United States) 2019 - 2024
- 4D+ Printing â Form and Function Design in Shape Memory Alloys awarded by Qatar National Research Fund - (Doha, Qatar) 2020 - 2023
- Collaborative Research: Small Crack Formation and Growth in the Presence of Reversible Martensite Transformation in High Temperature Shape Memory Alloys awarded by National Science Foundation - (Arlington, Virginia, United States) 2019 - 2022
- REU Site: Multifunctional Materials awarded by National Science Foundation - (Arlington, Virginia, United States) 2019 - 2022
- Unified Theory and Experimentation for Fatigue and Fracture of High Temperature Shape Memory Alloys awarded by United States Air Force - (Arlington, Virginia, United States) 2018 - 2021
- Disaster-Resilient and Self-Assessing Multifunctional Transportation Structures awarded by United States Department of Transportation - (Washington D.C., District of Columbia, United States) 2018 - 2019
- Modeling, Characterization, & Thermo-Mechanical Processing of Low-Cost Martensitic Steels- awarded by United States Air Force - (Arlington, Virginia, United States) 2017 - 2019
- Smart PV Skin: Grid-Connected, Non-Planar Photovoltaic Systems awarded by Qatar National Research Fund - (Doha, Qatar) 2015 - 2019
- Integrated Health Monitoring and Reinforcement of Transportation Structures with Optimized Low-Cost Multifunctional Braided Cables awarded by United States Department of Transportation - (Washington D.C., District of Columbia, United States) 2017 - 2018
- Low Temperature Shape Memory Alloys (LTSMA) - Composition Effect and Control of Transformation Behavior awarded by Glenn Research Center - (Cleveland, Ohio, United States) 2017 - 2018
- Multi-Material Bulk Deposition and Characterization System for Accelerated Materials Discovery and Design awarded by United States Air Force - (Arlington, Virginia, United States) 2016 - 2018
- PFI:AIR-TT: Partnerships for Innovation: Accelerating Innovation Research - Technology Translation (PFI:AIR-TT). -Self-adaptive growing rod for the treatment of pediatric scoliosis awarded by National Science Foundation - (Arlington, Virginia, United States) 2016 - 2018
- Actuation-Induced Failure of High Temperature Shape-Memory Alloys awarded by United States Air Force - (Arlington, Virginia, United States) 2015 - 2018
- Elucidating Actuation-Induced Failure Mechanisms in High Temperature Shape Memory Alloys awarded by United States Air Force - (Arlington, Virginia, United States) 2015 - 2018
- Glassy Ferromagnetic Shape Memory Alloys: Interplay Between Disorder, Phase Transitions, and Multi-Physics Couplings awarded by National Science Foundation - (Arlington, Virginia, United States) 2015 - 2018
- Novel aluminum alloys for very high temperature applications awarded by Qatar National Research Fund - (Doha, Qatar) 2015 - 2018
- REU Site: Multifunctional Materials awarded by National Science Foundation - (Arlington, Virginia, United States) 2015 - 2018
- Processing of Equiatomic and Ti-rich NiTiHf High temperature Shape Memory Alloys for Flat Products awarded by Glenn Research Center - (Cleveland, Ohio, United States) 2015 - 2016
- I-Corps: Self-Adaptive, Ultra-Low Modulus Alloys and Devices- awarded by National Science Foundation - (Arlington, Virginia, United States) 2013 - 2015
- Nano-Precipitation Hardened Novel High Temperature Shape Memory Alloys with Dimensional and Thermal Stability awarded by United States Air Force - (Arlington, Virginia, United States) 2012 - 2015
- TAOI B: Synergistic Computational and Microstructural Design of Next-Generation High-Temperature Austenitic Stainless Steels awarded by United States Department of Energy - (Washington D.C., District of Columbia, United States) 2012 - 2015
co-principal investigator on
- Understanding the interplay of precipitates and dislocations on the reversible martensitic transformation in cyclically actuated NiTiHf shape memory alloys awarded by Directorate for Mathematical & Physical Sciences - (Arlington, Virginia, United States) 2020 - 2023
- Probing Microstructure-Martensitic Transformation Couplings in Metamagnetic Shape Memory Alloys awarded by National Science Foundation - (Arlington, Virginia, United States) 2019 - 2022
- D.5 University Leadership Initiative awarded by National Aeronautics and Space Administration - (Washington D.C., District of Columbia, United States) 2017 - 2022
- Texas Engineering Experiment Station Fellowship and Scholarship Support awarded by United States Department of Energy - (Washington D.C., District of Columbia, United States) 2009 - 2022
- Materials and Manufacturing Processes for the Army of the Future awarded by United States Army - (Washington D.C., District of Columbia, United States) 2019 - 2020
- Planning Grant: Engineering Research Center for Advanced Materials Manufacturing and Discovery for Extreme Environments (CAM2DE2) awarded by National Science Foundation - (Arlington, Virginia, United States) 2018 - 2020
- MRI: Development of Multi-Field Resonant Ultrasound Spectroscopy awarded by National Science Foundation - (Arlington, Virginia, United States) 2017 - 2020
- Multi-Information Source Value of Information Based Design of Multi-Phase Structural Materials awarded by National Science Foundation - (Arlington, Virginia, United States) 2017 - 2020
- Synergistic Modeling, Characterization, and Design of Embedded Phase Transforming Sensory Particles awarded by National Science Foundation - (Arlington, Virginia, United States) 2017 - 2020
- Manufacturing Process Science: The Science of Processing/Alloying Windows in Metals Additive Manufacturing awarded by United States Army - (Washington D.C., District of Columbia, United States) 2018 - 2019
- Engineering the Anisotropy of Magnesium Alloys for Enhanced Performance awarded by National Science Foundation - (Arlington, Virginia, United States) 2016 - 2019
- DMREF: Accelerating the Development of High Temperature Shape Memory Alloys awarded by National Science Foundation - (Arlington, Virginia, United States) 2015 - 2019
- Control of Variability in the Performance of Selective Laser Melting (SLM) Parts through Microstructure Control and Design awarded by National Aeronautics and Space Administration - (Washington D.C., District of Columbia, United States) 2015 - 2018
- Texas A&M U. Planning Grant: I/UCRC for Metal Deformation Processes (iuFOCUS) awarded by National Science Foundation - (Arlington, Virginia, United States) 2016 - 2017
- Fracture Mechanics in the Presence of Reversible Martensitic Transformation in High Temperature Shape Memory Alloys awarded by National Science Foundation - (Arlington, Virginia, United States) 2013 - 2016
- International Institute on Multifunctional Materials for Energy Conversion (IIMEC) awarded by National Science Foundation - (Arlington, Virginia, United States) 2009 - 2016
- Coupling Damage-sensing Particles and Computational Micromechanics to enable the Digital Twin: Phase II awarded by Langley Research Center - (Hampton, Virginia, United States) 2014 - 2015
- (MURI 09) Synthesis, Characterization and Modeling of Functionally Graded Multifunctional Hybrid Composites for Extreme Environments awarded by United States Air Force - (Arlington, Virginia, United States) 2009 - 2015
Teaching
teaching activities
- ENGR491 Hnr-research Instructor
- MEEN485 Directed Studies Instructor
- MEEN491 Hnr-research Instructor
- MEEN684 Professional Internship Instructor
- MEEN684 Professional Internship Instructor
- MEEN685 Directed Studies Instructor
- MEEN691 Research Instructor
- MSEN281 Materials Seminar Instructor
- MSEN491 Hnr-research Instructor
- MSEN684 Professional Internship Instructor
- MSEN684 Professional Internship: In-ab Instructor
- MSEN685 Directed Studies Instructor
- MSEN691 Research Instructor
Works By Students
chaired theses and dissertations
-
Akin, Erhan (2010-08). Effect of Aging Heat Treatments on Ni52Ti48 Shape Memory Alloy.
-
Al Maharbi, Majid H. (2009-12). Mechanical Flow Response and Anisotropy of Ultra-Fine Grained Magnesium and Zinc Alloys.
-
Atli, Kadri (2011-08). Thermomechanical Cyclic Response of TiNiPd High-Temperature Shape Memory Alloys.
-
Barrie, Fatmata Haja (2009-12). Effects of Constrained Aging on the Shape Memory Response of Nickel Rich Niti Shape Memory Alloys.
-
Barta, Nicholas E. (2018-10). NiMn Based Ferromagnetic Shape Memory Alloys for Structural Health Monitoring.
-
Basaran, Burak (2009-12). Magnetic field-induced phase transformation & power harvesting capabilities in magnetic shape memory alloys.
-
Brewer, Andrew Lee (2007-05). Shape memory response of ni2mnga and nimncoin magnetic shape memory alloys under compression.
-
Bruno, Nickolaus Mark (2015-08). The Magnetocaloric and Elastocaloric Effects in Magnetic Shape Memory Alloys.
-
Dogan, Ebubekir (2010-08). CoNiGa High Temperature Shape Memory Alloys.
-
Dogan, Ebubekir (2014-12). Role of Crystallographic Texture and Grain Size on Low Temperature Deformation and Formability of a Mg Alloy.
-
Evirgen, Alper (2014-08). Microstructural Characterization and Shape Memory Response of Ni-Rich NiTiHf and NiTiZr High Temperature Shape Memory Alloys.
-
Franco, Brian Eelan (2014-12). Engineering the Martensitic Transformation Hysteresis of Ni-Rich NiTi Alloys.
-
Haouaoui, Mohammed (2005-12). An investigation of bulk nanocrystalline copper fabricated via severe plastic deformation and nanoparticle consolidation.
-
Hayrettin, Ceylan (2017-10). Actuation Fatigue and Fracture of Shape Memory Alloys.
-
Hu, Liangfa (2015-05). Fabrication and Characterization of Interpenetrating Metal/Ternary Carbide Composites.
-
Hutchins, Cathleen Ruth (2007-08). Consolidation of copper and aluminum micro and nanoparticles via equal channel angular extrusion.
-
Karaca, Haluk Ersin (2007-08). Magnetic field-induced phase transformation and variant reorientation in Ni2MnGa and NiMnCoIn magnetic shape memory alloys.
-
Kockar, Benat (2007-12). Shape memory behavior of ultrafine grained NiTi and TiNiPd shape memory alloys.
-
Kulkarni, Ajay V. (2004-12). Effect of ausforming via severe plastic deformation on shape memory behavior of NiTi.
-
Modarres Razavi, Sonia (2011-12). Effect of Texture on Formability and Mechanical Anisotropy of a Severe Plastically Deformed Magnesium Alloy.
-
Ozdemir, Nevin (2012-05). Size Effects in Ferromagnetic Shape Memory Alloys.
-
Sam, Joel J (2018-11). Viability and Reproducibility of Additively Manufactured Shape Memory Alloys and High Temperature Shape Memory Alloys.
-
Simon, Anish Abraham (2004-12). Shape memory response and microstructural evolution of a severe plastically deformed high temperature shape memory alloy (NiTiHf).
-
Sutter, Steven George (2005-12). The effect of strain and path change on the mechanical properties and microstructural evolution of ultrafine grained interstitial free steel during equal channel angular extrusion (ECAE).
-
Tseng, Li-Wei (2015-05). Microstructure and Superelastic Response of Iron-Based Shape Memory Alloys.
-
Vaughan, Matthew Webster (2017-06). Enhancing the Strength and Formability of Magnesium Alloys for Lightweight Structural Applications.
-
Yapici, Guney Guven (2005-05). Severe plastic deformation of difficult-to-work alloys.
-
Yapici, Guney Guven (2007-08). Investigation and modeling of processing-microstructure-property relations in ultra-fine grained hexagonal close packed materials under strain path changes.
-
Yegin, Cengiz (2012-05). Magneto-Thermo-Mechanical Response and Magneto-Caloric Effect in Magnetic Shape Memory Alloys.
-
Yilmaz, Havva Cansu (2017-12). Effects of Equal Channel Angular Extrusion on the Microstructure and Mechanical Properties of CoCrFeMnNi.
-
Zhu, Ruixian (2009-12). The Effect of Crystallographic Orientation and Thermo-mechanical Loading Conditions on the Phase Transformation Characteristics of Ferromagnetic Shape Memory Alloys.
-
Zhu, Ruixian (2013-05). Microstructure Design of Low Alloy Transformation-Induced Plasticity Assisted Steels.
Background
education and training
- Ph.D. in Mechanical Engineering, University of Illinois at Urbana Champaign - (Urbana, Illinois, United States) 2000
- M.S. in Mechanical Engineering, Bogazici University - (Istanbul, Istanbul, Turkey) 1996
- B.S. in Mechanical Engineering, Bogazici University - (Istanbul, Istanbul, Turkey) 1995
awards and honors
- Association of Former Students University-Level Distinguished Achievement Award, The, conferred by Texas A&M University - (College Station, Texas, United States), 2013
- Gary Anderson Early Achievement Award, conferred by American Society of Mechanical Engineers - (New York, New York, United States), 2009
- Young Investigator Program Award, conferred by Office of Naval Research - (Ruislip, United Kingdom), 2005
- AIME Robert Lansing Hardy Award, conferred by Minerals Metals and Materials Society - (Pittsburgh, Pennsylvania, United States), 2005
- Faculty Early Career Development (CAREER) Program, conferred by National Science Foundation - (Arlington, Virginia, United States), 2002
Contact
first name
- Ibrahim
has last name
- Karaman
mailing address
-
Texas A&M University
Materials Science & Engineering
3003 TAMU
College Station, TX 77843-3003
USA
Other
In the News
- ikaraman@tamu.edu