HR job title
- Professor
- Contact Info
- 1 979 845 4061
- ORCiD
- 0000-0002-8178-3988
Polycarpou, Andreas Professor and Head
Positions
- Faculty Affiliate, Energy Institute, Texas A&M Engineering Experiment Station (TEES)
My research interests include tribology, nanotechnology, microtribology related to miniature systems, magnetic storage, surface characterization, friction/vibration interaction, system dynamics and modeling, and experimental design and instrumentation. Specifically, I study micro/nanotribology of magnetic head disk interfaces and microelectromechanical systems. Recent emphasis has been on the tribology of devices for reduced energy and improved environmental-related impact, such as the use of carbon dioxide as a natural refrigerant and the use of surface treatments towards oil-lees machine operation.
- Overview
- Publications
- Research
- Teaching
- Background
- Contact
- Other
- View All
Overview
Publications
selected publications
-
academic article
-
Vaught, L. O., & Polycarpou, A. A.
(2023).
Investigating the effect of fused deposition modelling on the tribology of PETG thermoplastic. 524, 204736-204736.
-
Amiri, A., Bashandeh, K., Sellers, R., Vaught, L., Naraghi, M., & Polycarpou, A. A.
(2023).
Fully integrated design of a stretchable kirigami-inspired micro-sized zinc-sulfur battery. 11(20), 10788-10797.
-
Amiri, A., Bruno, A., & Polycarpou, A.
(2023).
Configuration-dependent stretchable all-solid-state supercapacitors and hybrid supercapacitors. 5(5),
-
Nunez, E. E., Polycarpou, A. A., & Economy, J.
(2023).
Tribological studies of a novel high-performance aromatic thermosetting copolyester containing carbon nanotubes for artificial hip joints. Tribology International.
178, 108038-108038.
-
Gheisari, R., Vazquez, M., Tsigkis, V., Erdemir, A., Wooley, K. L., & Polycarpou, A. A.
(2023).
Microencapsulated paraffin as a tribological additive for advanced polymeric coatings. Friction.
1-14.
-
Bashandeh, K., Lan, P., & Polycarpou, A. A.
(2023).
Tribology of self-lubricating high performance ATSP, PI, and PEEK-based polymer composites up to 300 degrees C. Friction.
11(1), 141-153.
-
Amiri, A., Sellers, R., Naraghi, M., & Polycarpou, A. A.
(2022).
Multifunctional Quasi-Solid-State Zinc-Sulfur Battery. ACS Nano.
17(2), 1217-1228.
-
Bashandeh, K., Lan, P., & Polycarpou, A. A.
(2022).
Abrasive wear of PEEK and ATSP-based polymer composite coatings under lunar regolith conditions. Wear.
506-507, 204461-204461.
-
Bashandeh, K., Amiri, A., Rafieerad, A., Rahman, S., Yan, W., Dhingra, S., & Polycarpou, A. A.
(2022).
MXene-aromatic thermosetting copolyester nanocomposite as an extremely wear-resistant biocompatible implant material for osteoarthritis applications. Applied Surface Science.
600, 154124-154124.
-
Asif, A., Rahman, S., & Polycarpou, A. A.
(2022).
Nanomechanical and tribological properties of nickel-chromium multilayer coating on Inconel 617. Journal of Applied Physics.
132(10), 105305-105305.
-
Vaught, L., Tsigkis, V., & Polycarpou, A. A.
(2022).
Development of a controlled-atmosphere, rapid-cooling cryogenic chamber for tribological and mechanical testing. Review of Scientific Instruments.
93(8), 083911-083911.
-
Salari, S., Behnia, F., Polycarpou, A. A., & Beheshti, A.
(2022).
Elevated temperature contact creep and friction of nickel-based superalloys using machine learning assisted finite element analysis. Mechanics of Materials.
171, 104346-104346.
-
Tsigkis, V., Bashandeh, K., Lan, P., & Polycarpou, A. A.
(2022).
Tribological investigation of advanced coatings subjected to Venusian environment of 2.4 MPa CO2 pressure and 462 degrees C. Surface and Coatings Technology.
441, 128550-128550.
-
Amiri, A., Naraghi, M., & Polycarpou, A. A.
(2022).
Zinc-ion hybrid supercapacitors with ultrahigh areal and gravimetric energy densities and long cycling life. Journal of Energy Chemistry.
70, 480-491.
-
Shakil, A., Kim, S., & Polycarpou, A. A.
(2022).
Creep Behavior of Graphene Oxide, Silk Fibroin, and Cellulose Nanocrystal Bionanofilms. Advanced Materials Interfaces.
9(18), 2101640-2101640.
-
Asif, A., Amiri, A., Jun, H. J., & Polycarpou, A. A.
(2022).
Impact of Ionic Liquid Additives and Inorganic Fullerene-Like Tungsten Disulfide on Friction and Wear under Aqueous Environments. Langmuir.
38(25), 7720-7732.
-
Amiri, A., Vaught, L., Naraghi, M., & Polycarpou, A. A.
(2022).
Multifunctional quasi-solid-state zinc-ion hybrid supercapacitors beyond state-of-the-art structural energy storage. Materials Today Physics.
24, 100654-100654.
-
Salari, S., Rahman, S., Beheshti, A., & Polycarpou, A. A.
(2022).
Elevated temperature nanoscratch of Inconel 617 Superalloy. Mechanics Research Communications.
121, 103875-103875.
-
Tsigkis, V., Rahman, M. S., Hackel, L., Davami, K., Beheshti, A., & Polycarpou, A. A.
(2022).
Helium tribology of Inconel 617 subjected to laser peening for high temperature nuclear reactor applications. Applied Surface Science.
577, 151961-151961.
-
Zheng, Y., Bashandeh, K., Shakil, A., Jha, S., & Polycarpou, A. A.
(2022).
Review of dental tribology: Current status and challenges. Tribology International.
166, 107354-107354.
-
Rahman, M. S., & Polycarpou, A. A.
(2022).
Nanomechanical and nanoscratch behavior of oxides formed on inconel 617 at 950 degrees C. Journal of Materials Research.
37(2), 580-594.
-
Amiri, A., Naraghi, M., & Polycarpou, A. A.
(2022).
Zinc-ion hybrid supercapacitors with ultrahigh areal and gravimetric energy densities and long cycling life. Journal of Energy Chemistry.
70, 480-491.
-
Tsigkis, V., Lan, P., & Polycarpou, A. A.
(2021).
Dynamic tribo-pair of PS400 and DLC for planet Venus application. Tribology International.
164, 107237-107237.
-
Shakil, A., Amiri, A., & Polycarpou, A. A.
(2021).
Effect of Carbon Configuration on Mechanical, Friction and Wear Behavior of Nitrogen-Doped Diamond-Like Carbon Films for Magnetic Storage Applications. TRIBOLOGY LETTERS.
69(4), 151.
-
Cho, H., Shakil, A., Polycarpou, A. A., & Kim, S.
(2021).
Enabling Selectively Tunable Mechanical Properties of Graphene Oxide/Silk Fibroin/Cellulose Nanocrystal Bionanofilms. ACS Nano.
15(12), 19546-19558.
-
Zhang, Y., Shakil, A., Humood, M., & Polycarpou, A. A.
(2021).
Finite element simulations of sliding contact of the head-disk interface in magnetic storage with lubricant effects. Applied Surface Science Advances.
6, 100155-100155.
-
Asif, A., Zheng, Y., Rahman, S., Amiri, A., Jun, H. J., & Polycarpou, A. A.
(2021).
Three-body abrasive wear in the presence of inorganic fullerene-like tungsten disulfide and ionic liquid containing alkanolamines and phosphates. Wear.
486, 204073-204073.
-
Humood, M., Asif, A., Guin, T., Polychronopoulou, K., Grunlan, J. C., & Polycarpou, A. A.
(2021).
Nanoindentation and nanoscratch of sub-micron polymer nanocomposite films on compliant substrate. THIN SOLID FILMS.
736, 138905-138905.
-
Amiri, A., Swart, E. N., & Polycarpou, A. A.
(2021).
Recent advances in electrochemically-efficient materials for zinc-ion hybrid supercapacitors. Renewable and Sustainable Energy Reviews.
148, 111288-111288.
-
Gheisari, R., & Polycarpou, A. A.
(2021).
Synergistic physical and chemical interactions of selected additives and base oil used in extended reach drilling applications. Wear.
478, 203889-203889.
-
Rafieerad, A., Amiri, A., Sequiera, G. L., Yan, W., Chen, Y., Polycarpou, A. A., & Dhingra, S.
(2021).
Biocompatible Electrodes: Development of FluorineFree Tantalum Carbide MXene Hybrid Structure as a Biocompatible Material for Supercapacitor Electrodes (Adv. Funct. Mater. 30/2021). Advanced Functional Materials.
31(30), 2170219-2170219.
-
Rafieerad, A., Amiri, A., Sequiera, G. L., Yan, W., Chen, Y., Polycarpou, A. A., & Dhingra, S.
(2021).
Development of Fluorine-Free Tantalum Carbide MXene Hybrid Structure as a Biocompatible Material for Supercapacitor Electrodes. Advanced Functional Materials.
31(30), 2100015-2100015.
-
Bashandeh, K., Marchert, A., Takayuki, U., Polycarpou, A. A., Meyer, J., & Lan, P.
(2021).
The effect of surface texturing on thin film reversible adhesive bond strength. International Journal of Adhesion and Adhesives.
107, 102829-102829.
-
Amiri, A., Bashandeh, K., Naraghi, M., & Polycarpou, A. A.
(2021).
All-solid-state supercapacitors based on yarns of Co3O4-anchored porous carbon nanofibers. 409, 128124-128124.
-
Shakil, A., & Polycarpou, A. A.
(2021).
High temperature nanomechanical properties of sub-5nm nitrogen doped diamond-like carbon using nanoindentation and finite element analysis. Journal of Applied Physics.
129(13), 135302-135302.
-
Zheng, Y., Asif, A., Amiri, A., & Polycarpou, A. A.
(2021).
Graphene-Based Aqueous Drilling Muds as Efficient, Durable, and Environmentally Friendly Alternatives for Oil-Based Muds. ACS Applied Nano Materials.
4(2), 1243-1251.
-
Bashandeh, K., Tsigkis, V., Lan, P., & Polycarpou, A. A.
(2021).
Extreme environment tribological study of advanced bearing polymers for space applications. Tribology International.
153, 106634-106634.
-
Shakil, A., Amiri, A., Tang, H., & Polycarpou, A. A.
(2021).
High temperature nanomechanical and nanotribological behavior of sub-5 nm nitrogen-doped carbon overcoat films. Applied Surface Science.
535, 147662-147662.
-
Zheng, Y., Rahman, M. S., & Polycarpou, A. A.
(2021).
Self-welding of Inconel 617 under high-pressure-high-temperature conditions for nuclear reactors. Nuclear Engineering and Design.
371, 110941-110941.
-
Tsigkis, V., Bashandeh, K., Lan, P., & Polycarpou, A. A.
(2021).
Tribological behavior of PS400-related tribopairs for space exploration. Tribology International.
153, 106636-106636.
-
Zhang, Y., Tang, H., & Polycarpou, A. A.
(2020).
High Temperature Mechanics, Friction, Wear and Adhesion of Heat-Assisted Magnetic Recording. TRIBOLOGY LETTERS.
68(4), 109.
-
Rahman, M. S., Polychronopoulou, K., & Polycarpou, A. A.
(2020).
Tribochemical changes of alloy 800HT under sliding contact at elevated temperature in impure helium environment. Wear.
462, 203508-203508.
-
Lan, P., & Polycarpou, A. A.
(2020).
Stribeck performance of drilling fluids for oil and gas drilling at elevated temperatures. Tribology International.
151, 106502-106502.
-
Zheng, Y., Amiri, A., & Polycarpou, A. A.
(2020).
Enhancements in the tribological performance of environmentally friendly water-based drilling fluids using additives. Applied Surface Science.
527, 146822-146822.
-
Bashandeh, K., Lee, J., Wu, Q., Li, Y. i., Wang, X., Shi, Y., ... Polycarpou, A. A.
(2020).
Mechanics and deformation of shape memory polymer kirigami microstructures. Extreme Mechanics Letters.
39, 100831-100831.
-
Gheisari, R., & Polycarpou, A. A.
(2020).
Effect of surface microtexturing on seawater-lubricated contacts under starved and fully-flooded conditions. Tribology International.
148, 106339-106339.
-
Salari, S., Rahman, M. S., Polycarpou, A. A., & Beheshti, A.
(2020).
Elevated temperature mechanical properties of Inconel 617 surface oxide using nanoindentation. Materials Science & Engineering: A.
788, 139539-139539.
-
Kim, S., Polycarpou, A. A., & Liang, H.
(2020).
Morphology and electric potential-induced mechanical behavior of metallic porous nanostructures. Friction.
8(3), 604-612.
-
Lan, P., Gheisari, R., Meyer, J. L., & Polycarpou, A. A.
(2020).
Surface Micro-texturing by Hot Sintering for Advanced Bearing Polymers for Friction Reduction Under Boundary Lubrication. International Journal of Precision Engineering and Manufacturing.
21(6), 1025-1034.
-
Bashandeh, K., Humood, M., Lee, J., Han, M., Cui, Y., Shi, Y., ... Polycarpou, A. A.
(2020).
The effect of defects on the cyclic behavior of polymeric 3D kirigami structures. Extreme Mechanics Letters.
36, 100650-100650.
-
Gheisari, R., Lan, P., & Polycarpou, A. A.
(2020).
Efficacy of surface microtexturing in enhancing the tribological performance of polymeric surfaces under starved lubricated conditions. Wear.
444, 203162-203162.
-
Lan, P., Iaccino, L. L., Bao, X., & Polycarpou, A. A.
(2020).
The effect of lubricant additives on the tribological performance of oil and gas drilling applications up to 200 degrees C. Tribology International.
141, 105896-105896.
-
Bashandeh, K., Lan, P., & Polycarpou, A. A.
(2019).
Tribological Performance Improvement of Polyamide against Steel Using Polymer Coating. Tribology Transactions.
62(6), 1051-1062.
-
Zhang, Y., Shakil, A., Wang, H., Li, X., Tang, H., & Polycarpou, A. A.
(2019).
Effects of SiO2 content on the nanomechanical properties of CoCrPt-SiO2 granular films. Scientific Reports.
9(1), 17580.
-
Gheisari, R., & Polycarpou, A. A.
(2019).
Tribological performance of graphite-filled polyimide and PTFE composites in oil-lubricated three-body abrasive conditions. Wear.
436, 203044-203044.
-
Rahman, M. S., Ding, J., Beheshti, A., Zhang, X., & Polycarpou, A. A.
(2019).
Tribology of incoloy 800HT for nuclear reactors under helium environment at elevated temperatures. Wear.
436, 203022-203022.
-
Rahman, M. S., Ding, J., Beheshti, A., Zhang, X., & Polycarpou, A. A.
(2019).
Helium Tribology of Inconel 617 at Elevated Temperatures up to 950 degrees C: Parametric Study. Nuclear Science and Engineering.
193(9), 998-1012.
-
Bashandeh, K., Lan, P., Meyer, J. L., & Polycarpou, A. A.
(2019).
Tribological Performance of Graphene and PTFE Solid Lubricants for Polymer Coatings at Elevated Temperatures. TRIBOLOGY LETTERS.
67(3), 99.
-
Rahman, M. S., Polychronopoulou, K., & Polycarpou, A. A.
(2019).
Tribochemistry of inconel 617 during sliding contact at 950 degrees C under helium environment for nuclear reactors. Journal of Nuclear Materials.
521, 21-30.
-
Gheisari, R., & Polycarpou, A. A.
(2019).
Tribology of Selected Hard Coatings for Oil and Gas Applications Up to 450 degrees C. TRIBOLOGY LETTERS.
67(2), 51.
-
Meyer, J. L., Bakir, M., Lan, P., Economy, J., Jasiuk, I., Bonhomme, G., & Polycarpou, A. A.
(2019).
Reversible Bonding of Aromatic Thermosetting Copolyesters for In-Space Assembly. Macromolecular Materials and Engineering.
304(4), 1800647-1800647.
-
Humood, M., Ozkan, T., Mohimi, E., Abelson, J. R., & Polycarpou, A. A.
(2019).
A framework for modeling the nanomechanical and nanotribological properties of high temperature HfBxCy coatings. Wear.
422, 280-288.
-
Humood, M., Lefebvre, J., Shi, Y., Han, M., Fincher, C. D., Pharr, M., Rogers, J. A., & Polycarpou, A. A.
(2019).
Fabrication and Mechanical Cycling of Polymer Microscale Architectures for 3D MEMS Sensors. Advanced Engineering Materials.
21(3), 1801254-1801254.
-
Humood, M., Ghamary, M. H., Lan, P., Iaccino, L. L., Bao, X., & Polycarpou, A. A.
(2019).
Influence of additives on the friction and wear reduction of oil-based drilling fluid. Wear.
422, 151-160.
-
Gheisari, R., Bashandeh, K., & Polycarpou, A. A.
(2019).
Effect of surface polishing on the tribological performance of hard coatings under lubricated three-body abrasive conditions. Surface Topography: Metrology and Properties.
7(4), 045001-045001.
-
Escobar Nunez, E., Gheisari, R., & Polycarpou, A. A.
(2019).
Tribology review of blended bulk polymers and their coatings for high-load bearing applications. Tribology International.
129, 92-111.
-
Lan, P., Polychronopoulou, K., Iaccino, L. L., Bao, X., & Polycarpou, A. A.
(2018).
Elevated-Temperature and -Pressure Tribology of Drilling Fluids Used in Oil and Gas Extended-Reach-Drilling Applications. SPE JOURNAL.
23(06), 2339-2350.
-
Gheisari, R., & Polycarpou, A. A.
(2018).
Three-body abrasive wear of hard coatings: Effects of hardness and roughness. THIN SOLID FILMS.
666, 66-75.
-
Humood, M., Meyer, J. L., Verkhoturov, S. V., Ozkan, T., Eller, M., Schweikert, E. A., Economy, J., & Polycarpou, A. A.
(2018).
2D AlB2 flakes for epitaxial thin film growth. Journal of Materials Research.
33(16), 2318-2326.
-
Rahman, M. S., Ding, J., Beheshti, A., Zhang, X., & Polycarpou, A. A.
(2018).
Elevated temperature tribology of Ni alloys under helium environment for nuclear reactor applications. Tribology International.
123, 372-384.
-
Zhang, Y., Oh, Y., Stauffer, D., & Polycarpou, A. A.
(2018).
A microelectromechanical systems (MEMS) force-displacement transducer for sub-5 nm nanoindentation and adhesion measurements. Review of Scientific Instruments.
89(4), 045109-045109.
-
Lan, P., & Polycarpou, A. A.
(2018).
High temperature and high pressure tribological experiments of advanced polymeric coatings in the presence of drilling mud for oil & gas applications. Tribology International.
120, 218-225.
-
Lan, P., Gheisari, R., Meyer, J. L., & Polycarpou, A. A.
(2018).
Tribological performance of aromatic thermosetting polyester (ATSP) coatings under cryogenic conditions. Wear.
398, 47-55.
-
Humood, M., Shi, Y., Han, M., Lefebvre, J., Yan, Z., Pharr, M., ... Polycarpou, A. A.
(2018).
3D Mesostructures: Fabrication and Deformation of 3D Multilayered Kirigami Microstructures (Small 11/2018). Small.
14(11), 1870045-1870045.
-
Lan, P., Zhang, Y., Dai, W., & Polycarpou, A. A.
(2018).
A phenomenological elevated temperature friction model for viscoelastic polymer coatings based on nanoindentation. Tribology International.
119, 299-307.
-
Humood, M., Shi, Y., Han, M., Lefebvre, J., Yan, Z., Pharr, M., ... Polycarpou, A. A.
(2018).
Fabrication and Deformation of 3D Multilayered Kirigami Microstructures. Small.
14(11), e1703852-1703852.
-
Lan, P., Polychronopoulou, K., Iaccino, L. L., Bao, X., & Polycarpou, A. A.
(2018).
Elevated-Temperature and -Pressure Tribology of Drilling Fluids Used in Oil and Gas Extended-Reach-Drilling Applications. SPE JOURNAL.
23(6), 2339-2350.
-
Zhang, Y., Wang, H., Li, X., Tang, H., & Polycarpou, A. A.
(2017).
A finite element correction method for sub-20 nm nanoindentation considering tip bluntness. International Journal of Solids and Structures.
129, 49-60.
-
Humood, M., Polychronopoulou, K., Song, Y., Grunlan, J. C., & Polycarpou, A. A.
(2017).
&ITIn situ&IT nanomechanical behavior and self-healing response of polymeric multilayer thin films. POLYMER.
131, 169-178.
-
Zhang, Y., Polychronopoulou, K., Humood, M., & Polycarpou, A. A.
(2017).
High temperature nanotribology of ultra-thin hydrogenated amorphous carbon coatings. Carbon.
123, 112-121.
-
Lan, P., Polychronopoulou, K., Zhang, Y., & Polycarpou, A. A.
(2017).
Three-body abrasive wear by (silica) sand of advanced polymeric coatings for tilting pad bearings. Wear.
382, 40-50.
-
Zhang, Y., & Polycarpou, A. A.
(2017).
A single asperity sliding contact model for molecularly thin lubricant. Microsystem Technologies: micro and nanosystems information storage and processing systems.
23(6), 1733-1741.
-
Song, Y., Meyers, K. P., Gerringer, J., Ramakrishnan, R. K., Humood, M., Qin, S., ... Grunlan, J. C.
(2017).
Fast Self-Healing of Polyelectrolyte Multilayer Nanocoating and Restoration of Super Oxygen Barrier. Macromolecular Rapid Communications.
38(10), 1700064-1700064.
-
Song, Y., Meyers, K. P., Gerringer, J., Ramakrishnan, R. K., Humood, M., Qin, S., ... Grunlan, J. C.
(2017).
Macromol. Rapid Commun. 10/2017. Macromolecular Rapid Communications.
38(10),
-
Lee, J., Beheshti, A., & Polycarpou, A. A.
(2017).
Rough Surface Normal Nanocontact Stiffness: Experimental Measurements and Rough Surface Contact Model Predictions. Journal of Applied Mechanics.
84(3), 031006.
-
Lee, J., Zhang, Y., Crone, R. M., Ramakrishnan, N., & Polycarpou, A. A.
(2017).
Wear Modeling of Nanometer Thick Protective Coatings. Journal of Tribology.
139(2), 021601.
-
Young, G. N., Humood, M., Kim, H., & Polycarpou, A. A.
(2017).
Electrode architecture of carbon-coated silicon nanowires through magnesiothermic reduction for lithium-ion batteries. MRS Communications.
7(4), 867-872.
-
Humood, M., Qin, S., Song, Y., Polychronopoulou, K., Zhang, Y., Grunlan, J. C., & Polycarpou, A. A.
(2017).
Influence of Graphene Reduction and Polymer Cross-Linking on Improving the Interfacial Properties of Multilayer Thin Films. ACS Applied Materials & Interfaces.
9(1), 1107-1118.
-
Humood, M., Beheshti, A., & Polycarpou, A. A.
(2017).
Surface reliability of annealed and tempered solar protective glasses: Indentation and scratch behavior. Solar Energy.
142, 13-25.
-
Humood, M., Beheshti, A., Meyer, J. L., & Polycarpou, A. A.
(2016).
Normal impact of sand particles with solar panel glass surfaces. Tribology International.
102, 237-248.
-
Kim, S., Choi, H., Polycarpou, A. A., & Liang, H.
(2016).
Morphology-influenced wetting model of nanopore structures. Friction.
4(3), 249-256.
-
Ozkan, T., Demirkan, M. T., Walsh, K. A., Karabacak, T., & Polycarpou, A. A.
(2016).
Density modulated nanoporous tungsten thin films and their nanomechanical properties. Journal of Materials Research.
31(14), 2011-2024.
-
Chatterjee, A., Beheshti, A., Polycarpou, A. A., & Bellon, P.
(2016).
Yield Maps for Single and Bilayer Thin Films Under Scratch. Journal of Tribology.
138(3), 031402.
-
Zhang, Y., & Polycarpou, A. A.
(2016).
Lubricant Transfer Model at the Head-Disk Interface in Magnetic Storage Considering Lubricant-Lubricant Interaction. TRIBOLOGY LETTERS.
62(3), 38.
-
Lan, P., Meyer, J. L., Vaezian, B., & Polycarpou, A. A.
(2016).
Advanced polymeric coatings for tilting pad bearings with application in the oil and gas industry. Wear.
354-355, 10-20.
-
Humood, M., Chowdhury, S., Song, Y., Tzeng, P., Grunlan, J. C., & Polycarpou, A. A.
(2016).
Nanomechanical Behavior of High Gas Barrier Multilayer Thin Films. ACS Applied Materials & Interfaces.
8(17), 11128-11138.
-
Akram, M. W., Meyer, J. L., & Polycarpou, A. A.
(2016).
Tribological interactions of advanced polymeric coatings with polyalkylene glycol lubricant and r1234yf refrigerant. Tribology International.
97, 200-211.
-
Alinia, Y., Beheshti, A., Guler, M. A., El-Borgi, S., & Polycarpou, A. A.
(2016).
Sliding contact analysis of functionally graded coating/substrate system. Mechanics of Materials.
94, 142-155.
-
Guin, T., Stevens, B., Krecker, M., D'Angelo, J., Humood, M., Song, Y., ... Grunlan, J. C.
(2016).
Ultrastrong, Chemically Resistant Reduced Graphene Oxide-based Multilayer Thin Films with Damage Detection Capability. ACS Applied Materials & Interfaces.
8(9), 6229-6235.
-
Lan, P., Meyer, J. L., Economy, J., & Polycarpou, A. A.
(2016).
Unlubricated Tribological Performance of Aromatic Thermosetting Polyester (ATSP) Coatings Under Different Temperature Conditions. TRIBOLOGY LETTERS.
61(1), 10.
-
Chowdhury, S., Polychronopoulou, K., Cloud, A., Abelson, J. R., & Polycarpou, A. A.
(2015).
Nanomechanical and nanotribological behaviors of hafnium boride thin films. THIN SOLID FILMS.
595, 84-91.
-
Mohimi, E., Ozkan, T., Babar, S., Polycarpou, A. A., & Abelson, J. R.
(2015).
Conformal growth of low friction HfBxCy hard coatings. THIN SOLID FILMS.
592, 182-188.
-
Kim, S., Polycarpou, A. A., & Liang, H.
(2015).
Electrical-potential induced surface wettability of porous metallic nanostructures. Applied Surface Science.
351, 460-465.
-
Akram, M. W., & Polycarpou, A. A.
(2015).
Wear Mechanisms of Gray Cast Iron in the Presence of Environmentally Friendly Hydrofluoroolefin-Based Refrigerant and the Effect of Tribofilm Formation. Journal of Tribology.
137(4), 041602.
-
Chowdhury, S., Vakis, A. I., & Polycarpou, A. A.
(2015).
Optimization of molecularly thin lubricant to improve bearing capacity at the head-disk interface. Microsystem Technologies: micro and nanosystems information storage and processing systems.
21(7), 1501-1511.
-
Kim, S., Zhou, Y., Cirillo, J. D., Polycarpou, A. A., & Liang, H.
(2015).
Bacteria repelling on highly-ordered alumina-nanopore structures. Journal of Applied Physics.
117(15), 155302-155302.
-
Escobar Nunez, E., & Polycarpou, A. A.
(2015).
The effect of surface roughness on the transfer of polymer films under unlubricated testing conditions. Wear.
326, 74-83.
-
Escobar Nunez, E., & Polycarpou, A. A.
(2015).
Wear study of metallic interfaces for air-conditioning compressors under submerged lubrication in the presence of carbon dioxide. Wear.
326, 28-35.
-
Yeo, S. M., & Polycarpou, A. A.
(2014).
Fretting experiments of advanced polymeric coatings and the effect of transfer films on their tribological behavior. Tribology International.
79, 16-25.
-
Lee, J., Polychronopoulou, K., Cloud, A. N., Abelson, J. R., & Polycarpou, A. A.
(2014).
Shear strength measurements of hafnium diboride thin solid films. Wear.
318(1-2), 168-176.
-
Akram, M. W., Polychronopoulou, K., & Polycarpou, A. A.
(2014).
Tribological performance comparing different refrigerant-lubricant systems: The case of environmentally friendly HFO-1234yf refrigerant. Tribology International.
78, 176-186.
-
Kim, S., Polycarpou, A. A., & Liang, H.
(2014).
Enhanced-Ion Transfer via Metallic-Nanopore Electrodes. Journal of the Electrochemical Society.
161(10), A1475-A1479.
-
Kim, S., Polycarpou, A. A., & Liang, H.
(2013).
Active control of surface forces via nanopore structures. APL Materials.
1(3), 032118-032118.
-
Truster, T. J., Eriten, M., Polycarpou, A. A., Bergman, L. A., & Masud, A.
(2013).
Stabilized interface methods for mechanical joints: Physics-based models and variationally consistent embedding. International Journal of Solids and Structures.
50(14-15), 2132-2150.
-
Akram, M. W., Polychronopoulou, K., Seeton, C., & Polycarpou, A. A.
(2013).
Tribological performance of environmentally friendly refrigerant HFO-1234 yf under starved lubricated conditions. Wear.
304(1-2), 191-201.
-
Yeo, S. M., & Polycarpou, A. A.
(2013).
Micromechanical properties of polymeric coatings. Tribology International.
60, 198-208.
-
Vakis, A. I., & Polycarpou, A. A.
(2013).
An Advanced Rough Surface Continuum-Based Contact and Sliding Model in the Presence of Molecularly Thin Lubricant. TRIBOLOGY LETTERS.
49(1), 227-238.
-
Chandrasekar, S., Eriten, M., & Polycarpou, A. A.
(2013).
An Improved Model of Asperity Interaction in Normal Contact of Rough Surfaces. Journal of Applied Mechanics.
80(1), 011025.
-
Vakis, A. I., & Polycarpou, A. A.
(2013).
An advanced rough surface continuum-based contact and sliding model in the presence of molecularly thin lubricant. TRIBOLOGY LETTERS.
49(1), 227-238.
-
Ramesh, A., Akram, W., Mishra, S. P., Cannon, A. H., Polycarpou, A. A., & King, W. P.
(2013).
Friction characteristics of microtextured surfaces under mixed and hydrodynamic lubrication. Tribology International.
57, 170-176.
-
Akram, M. W., Polychronopoulou, K., & Polycarpou, A. A.
(2013).
Lubricity of environmentally friendly HFO-1234yf refrigerant. Tribology International.
57, 92-100.
-
Yeo, C., Lee, J., & Polycarpou, A. A.
(2012).
Dynamic adhesive forces in rough contacting bodies including normal and sliding conditions. Journal of Adhesion Science and Technology.
26(24), 2709-2718.
-
Vakis, A. I., & Polycarpou, A. A.
(2012).
Passive Vibration Absorption for Extremely High Density Recording. IEEE Transactions on Magnetics.
48(11), 4261-4264.
-
Eriten, M., Polycarpou, A. A., & Bergman, L. A.
(2012).
A Physics-Based Friction Model and Integration to a Simple Dynamical System. Journal of Vibration and Acoustics: Transactions of the ASME.
134(5), 051012.
-
Wu, A., Shi, X. i., & Polycarpou, A. A.
(2012).
An Elastic-Plastic Spherical Contact Model Under Combined Normal and Tangential Loading. Journal of Applied Mechanics.
79(5), 051001.
-
Yeo, S. M., & Polycarpou, A. A.
(2012).
Tribological performance of PTFE- and PEEK-based coatings under oil-less compressor conditions. Wear.
296(1-2), 638-647.
-
Eriten, M., Lee, C., & Polycarpou, A. A.
(2012).
Measurements of tangential stiffness and damping of mechanical joints: Direct versus indirect contact resonance methods. Tribology International.
50, 35-44.
-
Eriten, M., Petlicki, D. T., Polycarpou, A. A., & Bergman, L. A.
(2012).
Influence of friction and adhesion on the onset of plasticity during normal loading of spherical contacts. Mechanics of Materials.
48, 26-42.
-
Vakis, A. I., Hadjicostis, C. N., & Polycarpou, A. A.
(2012).
Three-DOF dynamic model with lubricant contact for thermal fly-height control nanotechnology. Journal of Physics D: Applied Physics.
45(13), 135402-135402.
-
Vakis, A. I., & Polycarpou, A. A.
(2012).
Dynamic Adhesive Contact with Molecularly Thin Lubricant at the Head-Disk Interface of Hard Disk Drives. TRIBOLOGY & LUBRICATION TECHNOLOGY.
68(3), 16-18.
-
Vakis, A. I., & Polycarpou, A. A.
(2012).
Modeling Sliding Contact of Rough Surfaces with Molecularly Thin Lubricants. TRIBOLOGY LETTERS.
45(1), 37-48.
-
Polychronopoulou, K., Lee, J., Tsotsos, C., Demas, N. G., Meschewski, R. L., Rebholz, C., & Polycarpou, A. A.
(2011).
Deposition and Nanotribological Characterization of Sub-100-nm Thick Protective Ti-Based Coatings for Miniature Applications. TRIBOLOGY LETTERS.
44(2), 213-221.
-
Mishra, S. P., & Polycarpou, A. A.
(2011).
Tribological studies of unpolished laser surface textures under starved lubrication conditions for use in air-conditioning and refrigeration compressors. Tribology International.
44(12), 1890-1901.
-
Eriten, M., Polycarpou, A. A., & Bergman, L. A.
(2011).
Development of a Lap Joint Fretting Apparatus. Experimental mechanics.
51(8), 1405-1419.
-
Eriten, M., Polycarpou, A. A., & Bergman, L. A.
(2011).
Effects of surface roughness and lubrication on the early stages of fretting of mechanical lap joints. Wear.
271(11-12), 2928-2939.
-
Lee, K. M., & Polycarpou, A. A.
(2011).
Microscale experimental and modeling wear studies of rail steels. Wear.
271(7-8), 1174-1180.
-
Eriten, M., Polycarpou, A. A., & Bergman, L. A.
(2011).
Physics-based modeling for fretting behavior of nominally flat rough surfaces. International Journal of Solids and Structures.
48(10), 1436-1450.
-
Robles Hernandez, F. C., Demas, N. G., Gonzales, K., & Polycarpou, A. A.
(2011).
Correlation between laboratory ball-on-disk and full-scale rail performance tests. Wear.
270(7-8), 479-491.
-
Vakis, A. I., Eriten, M., & Polycarpou, A. A.
(2011).
Modeling Bearing and Shear Forces in Molecularly Thin Lubricants. TRIBOLOGY LETTERS.
41(3), 573-586.
-
Eriten, M., Polycarpou, A. A., & Bergman, L. A.
(2011).
Surface Roughness Effects on Energy Dissipation in Fretting Contact of Nominally Flat Surfaces. Journal of Applied Mechanics.
78(2), 021011.
-
Yeo, S. M., Nunez, E. E., & Polycarpou, A. A.
(2011).
Tribological Performances of Polymer-Based Coating Materials Designed for Compressor Applications. 64, 33-42.
-
Nunez, E. E., Yeo, S. M., Polychronopoulou, K., & Polycarpou, A. A.
(2011).
Tribological study of high bearing blended polymer-based coatings for air-conditioning and refrigeration compressors. Surface and Coatings Technology.
205(8-9), 2994-3005.
-
Nunez, E. E., Polychronopoulou, K., & Polycarpou, A. A.
(2010).
Lubricity effect of carbon dioxide used as an environmentally friendly refrigerant in air-conditioning and refrigeration compressors. Wear.
270(1-2), 46-56.
-
de Mello, J., & Polycarpou, A. A.
(2010).
Abrasive wear mechanisms of multi-components ferrous alloys abraded by soft, fine abrasive particles. Wear.
269(11-12), 911-920.
-
Lee, C., Eriten, M., & Polycarpou, A. A.
(2010).
Erratum: Application of Elastic-Plastic Static Friction Models to Rough Surfaces With Asymmetric Asperity Distribution [Journal of Tribology, 2010, 132(3), p. 031602]. Journal of Tribology.
132(4), 047001.
-
Katta, R. R., & Polycarpou, A. A.
(2010).
Impact of a Fixed-Length Rigid Cylinder on an Elastic-Plastic Homogeneous Body. Journal of Tribology.
132(4), 041402.
-
Tsotsos, C., Baker, M. A., Polychronopoulou, K., Gibson, P. N., Giannakopoulos, K., Polycarpou, A. A., Boebel, K., & Rebholz, C.
(2010).
Structure and mechanical properties of low temperature magnetron sputtered nanocrystalline (nc-)Ti(N,C)/amorphous diamond like carbon (a-C:H) coatings. THIN SOLID FILMS.
519(1), 24-30.
-
Katta, R. R., Polycarpou, A. A., & Hanchi, J. V.
(2010).
Flash temperature during impact of layered elastic solids. Tribology International.
43(9), 1768-1772.
-
Eriten, M., Polycarpou, A. A., & Bergman, L. A.
(2010).
Physics-based modeling for partial slip behavior of spherical contacts. International Journal of Solids and Structures.
47(18-19), 2554-2567.
-
Yeo, C., Katta, R. R., Lee, J., & Polycarpou, A. A.
(2010).
Effect of asperity interactions on rough surface elastic contact behavior: Hard film on soft substrate. Tribology International.
43(8), 1438-1448.
-
Chatterjee, A., Kumar, N., Abelson, J. R., Bellon, P., & Polycarpou, A. A.
(2010).
Nanowear of Hafnium Diboride Thin Films. Tribology Transactions.
53(5), 731-738.
-
Lee, C., Eriten, M., & Polycarpou, A. A.
(2010).
Application of Elastic-Plastic Static Friction Models to Rough Surfaces With Asymmetric Asperity Distribution. Journal of Tribology.
132(3), 031602-11.
-
Tsotsos, C., Polychronopoulou, K., Demas, N. G., Constantinides, G., Gravani, S., Boebel, K., ... Rebholz, C.
(2010).
Mechanical and high pressure tribological properties of nanocrystalline Ti(N,C) and amorphous C:H nanocomposite coatings. Diamond and Related Materials.
19(7-9), 960-963.
-
Vakis, A. I., & Polycarpou, A. A.
(2010).
Head-disk interface nanotribology for Tbit/inch(2) recording densities: near-contact and contact recording. Journal of Physics D: Applied Physics.
43(22), 225301-225301.
-
Zhang, J., Polycarpou, A. A., & Economy, J.
(2010).
An Improved Tribological Polymer-Coating System for Metal Surfaces. TRIBOLOGY LETTERS.
38(3), 355-365.
-
Vakis, A. I., & Polycarpou, A. A.
(2010).
Optimization of thermal fly-height control slider geometry for Tbit/in(2) recording. Microsystem Technologies: micro and nanosystems information storage and processing systems.
16(6), 1021-1034.
-
Lee, C., & Polycarpou, A. A.
(2010).
A phenomenological friction model of tripod constant velocity (CV) joints. Tribology International.
43(4), 844-858.
-
Lee, C., & Polycarpou, A. A.
(2010).
Assessment of Elliptical Conformal Hertz Analysis Applied to Constant Velocity Joints. Journal of Tribology.
132(2), 024501-3.
-
Polychronopoulou, K., Demas, N. G., Gibson, P. N., Rebholz, C., & Polycarpou, A. A.
(2010).
Effect of Cu Content on the Structure, and Performance of Substoichiometric Cr-N Coatings. TRIBOLOGY LETTERS.
38(1), 57-68.
-
Katta, R. R., Polycarpou, A. A., Lee, S., & Suk, M.
(2010).
Experimental and FEA Scratch of Magnetic Storage Thin-Film Disks to Correlate Magnetic Signal Degradation With Permanent Deformation. Journal of Tribology.
132(2), 021902-11.
-
Yu, N., Polycarpou, A. A., & Hanchi, J. V.
(2010).
Thermomechanical finite element analysis of slider-disk impact in magnetic storage thin film disks. Tribology International.
43(4), 737-745.
-
Solzak, T. A., & Polycarpou, A. A.
(2010).
Tribology of Hard Protective Coatings Under Realistic Operating Conditions for Use in Oilless Piston-Type and Swash-Plate Compressors. Tribology Transactions.
53(3), 319-328.
-
Nunez, E. E., Demas, N. G., Polychronopoulou, K., & Polycarpou, A. A.
(2010).
Comparative scuffing performance and chemical analysis of metallic surfaces for air-conditioning compressors in the presence of environmentally friendly CO2 refrigerant. Wear.
268(5-6), 668-676.
-
Chatterjee, A., Polycarpou, A. A., Abelson, J. R., & Bellon, P.
(2010).
Nanoscratch study of hard HfB2 thin films using experimental and finite element techniques. Wear.
268(5-6), 677-685.
-
Yeo, S. M., Polycarpou, A. A., Tseregounis, S. I., Tavassolian, N., & Papapolymerou, J.
(2010).
Characterization and Adhesion of Interacting Surfaces in Capacitive RF MEMS Switches Undergoing Cycling. Journal of Adhesion Science and Technology.
24(15-16), 2617-2639.
-
Dascalescu, D., Polychronopoulou, K., & Polycarpou, A. A.
(2009).
The significance of tribochemistry on the performance of PTFE-based coatings in CO2 refrigerant environment. Surface and Coatings Technology.
204(3), 319-329.
-
Yeo, C., Katta, R. R., & Polycarpou, A. A.
(2009).
Improved Elastic Contact Model Accounting for Asperity and Bulk Substrate Deformation. TRIBOLOGY LETTERS.
35(3), 191-203.
-
Katta, R. R., Nunez, E. E., Polycarpou, A. A., & Lee, S.
(2009).
Plane strain sliding contact of multilayer magnetic storage thin-films using the finite element method. Microsystem Technologies: micro and nanosystems information storage and processing systems.
15(7), 1097-1110.
-
De Mello, J., Binder, R., Demas, N. G., & Polycarpou, A. A.
(2009).
Effect of the actual environment present in hermetic compressors on the tribological behaviour of a Si-rich multifunctional DLC coating. Wear.
267(5-8), 907-915.
-
Katta, R. R., Polycarpou, A. A., Hanchi, J. V., & Crone, R. M.
(2009).
High Velocity Oblique Impact and Coefficient of Restitution for Head Disk Interface Operational Shock. Journal of Tribology.
131(2), 021903-9.
-
Nunez, E. E., Demas, N. G., Polychronopoulou, K., & Polycarpou, A. A.
(2009).
Tribological Study Comparing PAG and POE Lubricants Used in Air-Conditioning Compressors Under the Presence of CO2. TRIBOLOGY & LUBRICATION TECHNOLOGY.
65(4), 34-41.
-
Katta, R. R., Polycarpou, A. A., Hanchi, J. V., & Roy, M.
(2009).
Analytical and Experimental Elastic-Plastic Impact Analysis of a Magnetic Storage Head-Disk Interface. Journal of Tribology.
131(1), 011902-10.
-
Polychronopoulou, K., Rebholz, C., Baker, M. A., Theodorou, L., Demas, N. G., Hinder, S. J., ... Boebel, K.
(2008).
Nanostructure, mechanical and tribological properties of reactive magnetron sputtered TiCx coatings. Diamond and Related Materials.
17(12), 2054-2061.
-
Demas, N. G., & Polycarpou, A. A.
(2008).
Tribological performance of PTFE-based coatings for air-conditioning compressors. Surface and Coatings Technology.
203(3-4), 307-316.
-
Polychronopoulou, K., Demas, N. G., Rebholz, C., & Polycarpou, A. A.
(2008).
Tribological Properties of Twin Electron-Beam Evaporated Cr-N and Al-Cr-N Coatings Under Laboratory Sliding and Drill Experiments. TRIBOLOGY LETTERS.
32(2), 117-127.
-
Nunez, E. E., Demas, N. G., Polychronopoulou, K., & Polycarpou, A. A.
(2008).
Tribological Study Comparing PAG and POE Lubricants Used in Air-Conditioning Compressors under the Presence of CO2. Tribology Transactions.
51(6), 790-797.
-
Xue, X., Phinney, L. M., & Polycarpou, A. A.
(2008).
Asymmetric surface roughness measurements and meniscus modeling of polysilicon surface micromachined flaps. Microsystem Technologies: micro and nanosystems information storage and processing systems.
14(1), 17-29.
-
Zhang, J., Demas, N. G., Polycarpou, A. A., & Economy, J.
(2008).
A new family of low wear, low coefficient of friction polymer blend based on polytetrafluoroethylene and an aromatic thermosetting polyester. Polymers for Advanced Technologies.
19(8), 1105-1112.
-
Chatterjee, A., Kumar, N., Abelson, J. R., Bellon, P., & Polycarpou, A. A.
(2008).
Nanoscratch and nanofriction behavior of hafnium diboride thin films. Wear.
265(5-6), 921-929.
-
Lee, K. M., Yeo, C., & Polycarpou, A. A.
(2008).
Relationship between scratch hardness and yield strength of elastic perfectly plastic materials using finite element analysis. Journal of Materials Research.
23(8), 2229-2237.
-
Shi, X. i., & Polycarpou, A. A.
(2008).
Investigation of Contact Stiffness and Contact Damping for Magnetic Storage Head-Disk Interfaces. Journal of Tribology.
130(2), 1-9.
-
Polycarpou, A. A., & Suh, A. Y.
(2008).
Design optimisation of sub-5 nm Head-Disk Interfaces using a two-degree-of-freedom dynamic contact model with friction. International Journal of Product Development.
5(3/4), 268-268.
-
Demas, N. G., Zhang, J., Polycarpou, A. A., & Economy, J.
(2008).
Tribological characterization of aromatic thermosetting copolyester-PTFE blends in air conditioning compressor environment. TRIBOLOGY LETTERS.
29(3), 253-258.
-
Yu, N., Polycarpou, A. A., & Hanchi, J. V.
(2008).
Elastic contact mechanics-based contact and flash temperature analysis of impact-induced head disk interface damage. Microsystem Technologies: micro and nanosystems information storage and processing systems.
14(2), 215-227.
-
Polycarpou, A. A., & Suh, A. Y.
(2008).
Design optimisation of sub-5 nm Head-Disk Interfaces using a two-degree-of-freedom dynamic contact model with friction. International Journal of Product Development.
5(3/4), 268-291.
-
Yeo, C., Lee, S., & Polycarpou, A. A.
(2008).
Dynamic adhesive force measurements under vertical and horizontal motions of interacting rough surfaces. Review of Scientific Instruments.
79(1), 015111-015111.
-
Xue, X., Polycarpou, A. A., & Phinney, L. M.
(2008).
Measurement and Modeling of Adhesion Energy Between Two Rough Microelectromechanical System (MEMS) Surfaces. Journal of Adhesion Science and Technology.
22(5-6), 429-455.
-
Xue, X., & Polycarpou, A. A.
(2008).
Meniscus model for noncontacting and contacting sphere-on-flat surfaces including elastic-plastic deformation. Journal of Applied Physics.
103(2), 023502-023502.
-
Lee, C., & Polycarpou, A. A.
(2007).
Static friction experiments and verification of an improved elastic-plastic model including roughness effects. Journal of Tribology.
129(4), 754-760.
-
Yeo, C., & Polycarpou, A. A.
(2007).
A correction to the nanoindentation technique for ultrashallow indenting depths. Journal of Materials Research.
22(9), 2359-2362.
-
Hernandez, F., Demas, N. G., Davis, D. D., Polycarpou, A. A., & Maal, L.
(2007).
Mechanical properties and wear performance of premium rail steels. Wear.
263(1-6), 766-772.
-
Xue, X., & Polycarpou, A. A.
(2007).
An improved meniscus surface model for contacting rough surfaces. Journal of Colloid and Interface Science.
311(1), 203-211.
-
Suh, A. Y., & Polycarpou, A. A.
(2007).
Modeling of the effect of preferential texturing on the interfacial forces in sub-5 nm ultralow flying head-disk interfaces. Journal of Tribology.
129(3), 553-561.
-
Lee, K. M., Yeo, C., & Polycarpou, A. A.
(2007).
Nanomechanical property and nanowear measurements for sub-10-nm thick films in magnetic storage. Experimental mechanics.
47(1), 107-121.
-
Hernndez, F., Demas, N. G., Gonzales, K., & Polycarpou, A. A.
(2007).
Novel laboratory wear performance test for premium rails. Railway Track and Structures.
103(2), 17-19.
-
Yeo, C., Polycarpou, A. A., Kiely, J. D., & Hsia, Y.
(2007).
Nanomechanical properties of sub-10 nm carbon film overcoats using the nanoindentation technique. Journal of Materials Research.
22(1), 141-151.
-
Chatterjee, A., Jayaraman, S., Gerbi, J. E., Kumar, N., Abelson, J. R., Bellon, P., Polycarpou, A. A., & Chevalier, J. P.
(2006).
Tribological behavior of hafnium diboride thin films. Surface and Coatings Technology.
201(7), 4317-4322.
-
Solzak, T. A., & Polycarpou, A. A.
(2006).
Tribology of WC/C coatings for use in oil-less piston-type compressors. Surface and Coatings Technology.
201(7), 4260-4265.
-
Solzak, T. A., & Polycarpou, A. A.
(2006).
Engineering outreach to Cub Scouts with hands-on activities pertaining to the Pinewood Derby car race. INTERNATIONAL JOURNAL OF ENGINEERING EDUCATION.
22(5), 1077-1096.
-
Shi, X. i., & Polycarpou, A. A.
(2006).
Adhesive effects on dynamic friction for unlubricated rough planar surfaces. Journal of Tribology.
128(4), 841-850.
-
Suh, A. Y., Lee, S., & Polycarpou, A. A.
(2006).
Design Optimization of Ultra-Low Flying Head-Disk Interfaces Using an Improved Elastic-Plastic Rough Surface Model. Journal of Tribology.
128(4), 801-810.
-
Lee, K. M., & Polycarpou, A. A.
(2006).
Shear strength determination using the nanoscratch technique and its application to thin solid films. Journal of Materials Research.
21(9), 2304-2313.
-
Suh, A. Y., Mate, C. M., Payne, R. N., & Polycarpou, A. A.
(2006).
Experimental and theoretical evaluation of friction at contacting magnetic storage slider-disk interfaces. TRIBOLOGY LETTERS.
23(3), 177-190.
-
Demas, N. G., & Polycarpou, A. A.
(2006).
Ultra high pressure tribometer for testing CO2 refrigerant at chamber pressures up to 2000 psi to simulate compressor conditions. Tribology Transactions.
49(3), 291-296.
-
Tayebi, N., & Polycarpou, A. A.
(2006).
Adhesion and contact modeling and experiments in microelectromechanical systems including roughness effects. Microsystem Technologies: micro and nanosystems information storage and processing systems.
12(9), 854-869.
-
Lee, K. M., & Polycarpou, A. A.
(2006).
Dynamic microwaviness measurements of super smooth disk media used in magnetic hard disk drives. Mechanical Systems and Signal Processing.
20(6), 1322-1337.
-
Lee, K. M., & Polycarpou, A. A.
(2006).
Noninvasive vibration diagnostics to detect head-disk contact in hard disk drives. IEEE Transactions on Magnetics.
42(8), 2090-2095.
-
Demas, N. G., & Polycarpou, A. A.
(2006).
Tribological investigation of cast iron air-conditioning compressor surfaces in CO2 refrigerant. TRIBOLOGY LETTERS.
22(3), 271-278.
-
Suh, A. Y., & Polycarpou, A. A.
(2006).
Analytical determination of the surface energy of sub-5 nm head-disk interfaces accounting for multilayer effects. Journal of Applied Physics.
99(8), 08n111-08N111.
-
Lee, K. M., Yeo, C., & Polycarpou, A. A.
(2006).
Mechanical property measurements of thin-film carbon overcoat on recording media towards 1 Tbit/in(2). Journal of Applied Physics.
99(8), 08g906-08G906.
-
Suh, A. Y., Patel, J. J., Polycarpou, A. A., & Conry, T. F.
(2006).
Scuffing of cast iron and Al390-T6 materials used in compressor applications. Wear.
260(7-8), 735-744.
-
Cannaday, M. L., & Polycarpou, A. A.
(2006).
Advantages of CO2 compared to R410a refrigerant of tribologically tested Aluminum 390-T6 surfaces. TRIBOLOGY LETTERS.
21(3), 185-192.
-
Suh, A. Y., & Polycarpou, A. A.
(2006).
Digital filtering methodology used to reduce scale of measurement effects in roughness parameters for magnetic storage supersmooth hard disks. Wear.
260(4-5), 538-548.
-
Meng, Y., Thomas, B. G., Polycarpou, A. A., Prasad, A., & Henein, H.
(2006).
Mould slag property measurements to characterize CC mould - Shell gap phenomena. Canadian Metallurgical Quarterly.
45(1), 79-94.
-
Shi, X. i., & Polycarpou, A. A.
(2005).
An elastic-plastic hybrid adhesion model for contacting rough surfaces in the presence of molecularly thin lubricant. Journal of Colloid and Interface Science.
290(2), 514-525.
-
Lee, C. H., & Polycarpou, A. A.
(2005).
Development of an apparatus to investigate friction characteristics of constant-velocity joints. Tribology Transactions.
48(4), 505-514.
-
Tayebi, N., & Polycarpou, A. A.
(2005).
Reducing the effects of adhesion and friction in microelectromechanical systems (MEMSs) through surface roughening: Comparison between theory and experiments. Journal of Applied Physics.
98(7), 073528-073528.
-
Cannaday, M. L., & Polycarpou, A. A.
(2005).
Tribology of unfilled and filled polymeric surfaces in refrigerant environment for compressor applications. TRIBOLOGY LETTERS.
19(4), 249-262.
-
Suh, A. Y., & Polycarpou, A. A.
(2005).
Adhesive contact modeling for sub-5-nm ultralow flying magnetic storage head-disk interfaces including roughness effects. Journal of Applied Physics.
97(10), 104328-104328.
-
Yu, N., Bonin, W. A., & Polycarpou, A. A.
(2005).
High-resolution capacitive load-displacement transducer and its application in nanoindentation and adhesion force measurements. Review of Scientific Instruments.
76(4), 045109-045109.
-
Shi, X., & Polycarpou, A. A.
(2005).
Measurement and modeling of normal contact stiffness and contact damping at the meso scale. Journal of Vibration and Acoustics: Transactions of the ASME.
127(1), 52-60.
-
Shi, X. i., & Polycarpou, A. A.
(2005).
Adhesive transition from noncontacting to contacting elastic spheres: extension of the Maugis-Dugdale model. Journal of Colloid and Interface Science.
281(2), 449-457.
-
Lee, K. M., Suh, A. Y., Demas, N. G., & Polycarpou, A. A.
(2005).
Surface and sub-micron sub-surface evolution of Al390-T6 undergoing tribological testing under submerged lubrication conditions in the presence of CO2 refrigerant. TRIBOLOGY LETTERS.
18(1), 1-12.
-
Demas, N. G., Polycarpou, A. A., & Conry, T. F.
(2005).
Tribological studies on scuffing due to the influence of carbon dioxide used as a refrigerant in compressors. Tribology Transactions.
48(3), 336-342.
-
Suh, A. Y., Lee, S. C., & Polycarpou, A. A.
(2004).
Adhesion and friction evaluation of textured slider surfaces in ultra-low flying head-disk interfaces. TRIBOLOGY LETTERS.
17(4), 739-749.
-
Tayebi, N., Conry, T. F., & Polycarpou, A. A.
(2004).
Reconciliation of nanoscratch hardness with nanoindentation hardness including the effects of interface shear stress. Journal of Materials Research.
19(11), 3316-3323.
-
Lee, S. C., & Polycarpou, A. A.
(2004).
Tri-state dynamic model and adhesive effects on flying-height modulation for ultra-low flying head disk interfaces. Microsystem Technologies: micro and nanosystems information storage and processing systems.
10(8-9), 649-661.
-
Yu, N., & Polycarpou, A. A.
(2004).
Adhesive contact based on the Lennard-Jones potential: a correction to the value of the equilibrium distance as used in the potential. Journal of Colloid and Interface Science.
278(2), 428-435.
-
Ning, Y., & Polycarpou, A. A.
(2004).
Extracting summit roughness parameters from random Gaussian surfaces accounting for asymmetry of the summit heights. Journal of Tribology.
126(4), 761-766.
-
Suh, A. Y., Yu, N., Lee, K. M., Polycarpou, A. A., & Johnson, H. T.
(2004).
Crystallite coalescence during film growth based on improved contact mechanics adhesion models. Journal of Applied Physics.
96(3), 1348-1359.
-
Yu, N., Polycarpou, A. A., & Johnson, A.
(2004).
Measuring mechanical properties of fine-wire cross-sections used in medical devices. 70(1), 106-113.
-
Yu, N., Polycarpou, A. A., & Wagoner Johnson, A. J.
(2004).
Measuring mechanical properties of fine-wire cross-sections used in medical devices. Journal of Biomedical Materials Research - Part B Applied Biomaterials.
70(1), 106-113.
-
Pergande, S. R., Polycarpou, A. A., & Conry, T. F.
(2004).
Nanomechanical properties of aluminum 390-T6 rough surfaces undergoing tribological testing. Journal of Tribology.
126(3), 573-582.
-
Yu, N., Pergande, S. R., & Polycarpou, A. A.
(2004).
Static friction model for rough surfaces with asymmetric distribution of asperity heights. Journal of Tribology.
126(3), 626-629.
-
Tayebi, N., Polycarpou, A. A., & Conry, T. F.
(2004).
Effects of substrate on determination of hardness of thin films by nanoscratch and nanoindentation techniques. Journal of Materials Research.
19(6), 1791-1802.
-
Tayebi, N., & Polycarpou, A. A.
(2004).
Modeling the effect of skewness and kurtosis on the static friction coefficient of rough surfaces. Tribology International.
37(6), 491-505.
-
Lee, S. C., & Polycarpou, A. A.
(2004).
Adhesion forces for sub-10 nm flying-height magnetic storage Head Disk Interfaces. Journal of Tribology.
126(2), 334-341.
-
Yu, N., & Polycarpou, A. A.
(2004).
Combining and contacting of two rough surfaces with asymmetric distribution of asperity heights. Journal of Tribology.
126(2), 225-232.
-
Yu, N., Polycarpou, A. A., & Conry, T. F.
(2004).
Tip-radius effect in finite element modeling of sub-50 nm shallow nanoindentation. THIN SOLID FILMS.
450(2), 295-303.
-
Yu, N., & Polycarpou, A. A.
(2004).
Use of the focused ion beam technique to produce a sharp spherical diamond indenter for sub-10 nm nanoindentation measurements. Journal of Vacuum Science and Technology Part B: Nanotechnology and Microelectronics.
22(2), 668-672.
-
Suh, A. Y., & Polycarpou, A. A.
(2003).
Effect of molecularly thin lubricant on roughness and adhesion of magnetic disks intended for extremely high-density recording. TRIBOLOGY LETTERS.
15(4), 365-376.
-
Shi, X., & Polycarpou, A. A.
(2003).
A dynamic friction model for unlubricated rough planar surfaces. Journal of Tribology.
125(4), 788-796.
-
Tayebi, N., Conry, T. F., & Polycarpou, A. A.
(2003).
Determination of hardness from nanoscratch experiments: Corrections for interfacial shear stress and elastic recovery. Journal of Materials Research.
18(9), 2150-2162.
-
Suh, A. Y., Polycarpou, A. A., & Conry, T. F.
(2003).
Detailed surface roughness characterization of engineering surfaces undergoing tribological testing leading to scuffing. Wear.
255(1-6), 556-568.
-
Suh, A. Y., & Polycarpou, A. A.
(2003).
Adhesion and pull-off forces for polysilicon MEMS surfaces using the sub-boundary lubrication model. Journal of Tribology.
125(1), 193-199.
-
Tayebi, N., Polycarpou, A. A., & Conry, T. F.
(2003).
Effects of the substrate on the determination of hardness of thin films by the nanoscratch and nanoindentation techniques: A comparative study for the cases of soft film on hard substrate and hard film on soft substrate. MRS Advances.
795, u7.5.
-
Lee, Y. M., & Polycarpou, A. A.
(2002).
Dynamic microwaviness measurements of super smooth disk media used in magnetic hard disk drives. Proceedings of SPIE.
4827, 493-504.
-
Yu, N., & Polycarpou, A. A.
(2002).
Contact of rough surfaces with asymmetric distribution of asperity heights. Journal of Tribology.
124(2), 367-376.
-
Yu, N., & Polycarpou, A. A.
(2001).
Contact of rough surfaces with asymmetric distribution of asperity heights. 1-10.
-
Polycarpou, A. A., & Etsion, I.
(2000).
A model for the static sealing performance of compliant metallic gas seats including surface roughness and rarefaction effects. Tribology Transactions.
43(2), 237-244.
-
Hanchi, J., Polycarpou, A. A., & Boutaghou, Z.
(1999).
Tribology of contacting head-disk interfaces. 9, 17-22.
-
Polycarpou, A. A., & Etsion, I.
(1999).
Analytical approximations in modeling contacting rough surfaces. Journal of Tribology.
121(2), 234-239.
-
Polycarpou, A. A., & Etsion, I.
(1998).
Static friction of contacting real surfaces in the presence of sub-boundary lubrication. Journal of Tribology.
120(2), 296-303.
-
Polycarpou, A. A., & Etsion, I.
(1998).
Comparison of the static friction subboundary lubrication model with experimental measurements on thin-film disks. Tribology Transactions.
41(2), 217-224.
-
Polycarpou, A. A., & Etsion, I.
(1998).
Static sealing performance of gas mechanical seals including surface roughness and rarefaction effects. Tribology Transactions.
41(4), 531-536.
-
Polycarpou, A. A., Soom, A., Swarnakar, V., Valtin, R. A., Acharya, R. S., Demjanenko, V., ... Porter, J. W.
(1996).
Event timing and shape analysis of vibration bursts from power circuit breakers. IEEE Transactions on Power Delivery.
11(2), 848-857.
-
Polycarpou, A. A., & Soom, A.
(1996).
A two-component mixed friction model for a lubricated line contact. Journal of Tribology.
118(1), 183-189.
-
Polycarpou, A. A., & Soom, A. A.
(1995).
Boundary and mixed friction in the presence of dynamic normal loads .2. Friction transients - Authors' closure. Journal of Tribology.
117(4), 748-748.
-
Polycarpou, A. A., & Soom, A.
(1995).
Erratum: Boundary and Mixed Friction in the Presence of Dynamic Normal Loads: Part IIFriction Transients [1995, ASME Journal of Tribology, 117(2), pp. 261266]. Journal of Tribology.
117(4), 574-574.
-
Polycarpou, A. A., & Soom, A.
(1995).
Erratum: Boundary and Mixed Friction in the Presence of Dynamic Normal Loads: Part ISystem Model [1995, ASME Journal of Tribology, 117(2), pp. 255260]. Journal of Tribology.
117(4), 574-574.
-
POLYCARPOU, A. A., & SOOM, A.
(1995).
MEASURED TRANSITIONS BETWEEN STICKING AND SLIPPING AT LUBRICATED LINE CONTACTS. Journal of Vibration and Acoustics: Transactions of the ASME.
117(3), 294-299.
-
Polycarpou, A. A., & Soom, A.
(1995).
Measured Transitions Between Sticking and Slipping at Lubricated Line Contacts. Journal of Vibration and Acoustics: Transactions of the ASME.
117(3A), 294-299.
-
POLYCARPOU, A. A., & SOOM, A.
(1995).
BOUNDARY AND MIXED FRICTION IN THE PRESENCE OF DYNAMIC NORMAL LOADS .1. SYSTEM MODEL. Journal of Tribology.
117(2), 255-260.
-
POLYCARPOU, A. A., & SOOM, A.
(1995).
BOUNDARY AND MIXED FRICTION IN THE PRESENCE OF DYNAMIC NORMAL LOADS .2. FRICTION TRANSIENTS. Journal of Tribology.
117(2), 261-266.
-
POLYCARPOU, A. A., & SOOM, A.
(1995).
APPLICATION OF A 2-DIMENSIONAL MODEL OF CONTINUOUS SLIDING FRICTION TO STICK-SLIP. Wear.
181(PART 1), 32-41.
-
Polycarpou, A. A., & Soom, A.
(1995).
Boundary and mixed friction in the presence of dynamic normal loads .1. System model (vol 117, pg 255, 1995). Journal of Tribology.
117(4), 574-574.
-
Polycarpou, A. A., & Soom, A.
(1995).
Boundary and mixed friction in the presence of dynamic normal loads .2. Friction transients (vol 117, pg 261, 1995). Journal of Tribology.
117(4), 574-574.
-
POLYCARPOU, A. A., & SOOM, A.
(1995).
2-DIMENSIONAL MODELS OF BOUNDARY AND MIXED FRICTION AT A LINE CONTACT. Journal of Tribology.
117(1), 178-184.
-
Polycarpou, A. A., & Soom, A.
(1994).
Boundary and mixed friction in the presence of dynamic normal loads: part I - system model. American Society of Mechanical Engineers (Paper).
1-6.
-
Polycarpou, A. A., & Soom, A.
(1994).
Boundary and mixed friction in the presence of dynamic normal loads: part II - friction transients. American Society of Mechanical Engineers (Paper).
1-6.
-
Polycarpou, A. A., & Soom, A.
(1994).
Two-dimensional models of boundary and mixed friction at a line contact. American Society of Mechanical Engineers (Paper).
1-7.
-
Vaught, L. O., & Polycarpou, A. A.
(2023).
Investigating the effect of fused deposition modelling on the tribology of PETG thermoplastic. 524, 204736-204736.
-
chapter
-
Nunez, E. E., Bashandeh, K., & Polycarpou, A. A.
(2020).
Thermal and Mechanical Properties of Polymer Coatings. Polymer Coatings.
(pp. 157-175).
Taylor & Francis.
-
Lan, P., Nunez, E. E., & Polycarpou, A. A.
(2020).
Advanced Polymeric Coatings and Their Applications: Green Tribology. Encyclopedia of Renewable and Sustainable Materials.
(pp. 345-358).
Elsevier.
-
Gheisari, R., Lan, P., & Polycarpou, A. A.
(2020).
Tribological Interactions of Advanced Polymeric Coatings. Encyclopedia of Renewable and Sustainable Materials.
(pp. 638-647).
Elsevier.
-
Polycarpou, A. A.
(2013).
Machine Failure Monitoring (MFM). Encyclopedia of Tribology.
(pp. 2159-2159).
Springer Nature.
-
Katta, R. R., & Polycarpou, A. A.
(2013).
Microtribodynamics of Magnetic Storage Hard Disk Drives. Encyclopedia of Tribology.
(pp. 2244-2256).
Springer Nature.
-
Lee, C., & Polycarpou, A. A.
(2012).
Dynamic Friction Characterization and Modeling of Tripod Constant Velocity Joints. Automotive Lubricants and Testing.
(pp. 437-453).
ASTM International.
-
Yeo, S. M., Polycarpou, A. A., Tseregounis, S. I., Tavassolian, N., & Papapolymerou, J.
(2010).
Characterization and Adhesion of Interacting Surfaces in Capacitive RF MEMS Switches Undergoing Cycling. ADHESION ASPECTS IN MEMS/NEMS.
(pp. 285-307).
Taylor & Francis.
-
Xue, X., & Polycarpou, A. A.
(2010).
Surface characterization, adhesion measurements and modeling of microelectromechanical systems. Nikas, G. K. (Eds.),
Recent Developments In Wear Prevention, Friction And Lubrication.
(pp. 279-314).
Research Signpost.
-
Polycarpou, A. A.
(2003).
Modeling adhesive forces for ultra low flying head disk interfaces. Hsu, S. M., & Ying, Z. C. (Eds.),
Nanotribology.
(pp. 79-93).
Springer Nature.
-
POLYCARPOU, A., & SOOM, A.
(1996).
MODELING UNSTEADY LUBRICATED FRICTION. Dynamics with Friction: Modeling, Analysis and Experiment.
(pp. 197-232).
World Scientific Publishing.
-
Nunez, E. E., Bashandeh, K., & Polycarpou, A. A.
(2020).
Thermal and Mechanical Properties of Polymer Coatings. Polymer Coatings.
(pp. 157-175).
Taylor & Francis.
-
conference paper
-
Xu, W., McAdams, D. A., & Polycarpou, A. A.
(2022).
Short Paper: An Initial Investigation of the Correlations Between the Quality of Engineering Assignments and Task-Independent Features
-
Fincher, C. D., Ozkan, T., Kim, H., Demirkan, M. T., Karabacak, T., & Polycarpou, A. A.
(2018).
Mechanical Properties of Nanoporous Si Anodes using a Continuum Mechanical Model. Acta Physica Polonica, Series A: General Physics, Physics of Condensed Matter, Optics and Quantum Electrodynamics.
401-404.
-
Garner, G., Fincher, C. D., Demirkan, M. T., Karabacak, T., Ozkan, T., & Polycarpou, A. A.
(2018).
Nanoporous Tungsten for Improved Mechanical Performance and Safety in Nuclear Control Rod Cladding. Acta Physica Polonica, Series A: General Physics, Physics of Condensed Matter, Optics and Quantum Electrodynamics.
397-400.
-
Saifur Rahman, M., & Polycarpou, A. A.
(2018).
Wear of Ni alloys at elevated temperature (950oC) under helium environment for nuclear reactor applications. Transactions of the American Nuclear Society.
119-121.
-
Rahman, M. S., Lan, P., & Polycarpou, A. A.
(2017).
High temperature nanoindentation of Ni alloys under helium environment. Transactions of the American Nuclear Society.
646-647.
-
Rahman, M. S., & Polycarpou, A. A.
(2017).
High temperature sliding wear behavior of Ni alloys under helium environment. Transactions of the American Nuclear Society.
634-637.
-
Kim, S., Polycarpou, A. A., & Liang, H.
(2015).
Optimizing the performance of ion-transfer and energy store via hexagonally ordered alumina nanopore template based electrode. 21-23.
-
Kim, S., Polycarpou, A. A., & Liang, H.
(2014).
AFM characterization of effects of electrical potential on self-organized metallic nanopore structures. 81-83.
-
Eriten, M., Polycarpou, A. A., & Bergman, L. A.
(2012).
A PHYSICS-BASED FRETTING MODEL WITH FRICTION AND INTEGRATION TO A SIMPLE DYNAMICAL SYSTEM. 1301-1307.
-
Wu, A., Shi, X. i., & Polycarpou, A. A.
(2012).
An Elastic-plastic Spherical Contact Model under Combined Normal and Tangential Loading. 289-+.
-
Vakis, A. I., Eriten, M., & Polycarpou, A. A.
(2011).
MOLECULARLY THIN LUBRICANT LAYER CONTACT MODEL ACCOUNTING FOR INTERFACIAL SLIP. 397-399.
-
Yeo, S. M., Nunez, E. E., & Polycarpou, A. A.
(2011).
TRIBOLOGICAL PERFORMANCE OF POLYMER-BASED COATINGS FOR OIL-LESS PISTON-TYPE COMPRESSOR APPLICATIONS. 65-67.
-
Lee, C., Eriten, M., & Polycarpou, A. A.
(2010).
Application of Elastic-Plastic Static Friction Models to Rough Surfaces With Asymmetric Asperity Distribution (vol 132, 031602, 2010). Journal of Tribology.
765-767.
-
Polycarpou, A. A., & Wahl, K. J.
(2010).
Welcome from the chairs
-
Lee, J., Yeo, C., & Polycarpou, A. A.
(2010).
AN IMPROVED ELASTIC CONTACT MODEL ACCOUNTING FOR ASPERITY INTERACTION AND BULK SUBSTRATE DEFORMATION. 317-319.
-
Polychronopoulou, K., Rebholz, C., Demas, N. G., Polycarpou, A. A., & Gibson, P. N.
(2010).
EFFECT OF Cu CONTENT ON THE TRIBOLOGICAL PERFORMANCE OF Cr-N COATINGS AT HIGH TEMPERATURES (840 degrees C). 115-117.
-
Katta, R. R., Polycarpou, A. A., Lee, S., & Suk, M.
(2010).
EXPERIMENTAL AND FEA SCRATCH CORRELATION OF MAGNETIC SIGNAL DEGRADATION IN MAGNETIC STORAGE THIN-FILM DISKS. 407-410.
-
Lorenzo-Martin, C., Ajayi, O. O., Lee, J., & Polycarpou, A. A.
(2010).
Frictional Behavior of Boundary Lubricated Contacts - Effect of Tribochemical Surface Films. 79-81.
-
Nunez, E. E., & Polycarpou, A. A.
(2010).
TRIBOLOGICAL PERFORMANCE OF POLYMER COATINGS IN CARBON DIOXIDE REFRIGERANT ENVIRONMENT. 119-121.
-
Yeo, S. M., Tseregounis, S. I., Polycarpou, A. A., Fruehling, A., & Peroulis, D.
(2010).
ANALYSIS OF TOPOGRAPHICAL CHANGES AND ADHESION FAILURES IN GOLD-TO-GOLD METAL RF MEMS SWITCHES WITH CYCLING. 13-15.
-
Dascalescu, D., Polychronopoulou, K., & Polycarpou, A. A.
(2009).
Effect of substrate material on the tribological performance of PTFE-based polymeric coatings in a CO
2 environment. 236-238.
-
Vakis, A. I., Lee, S., & Polycarpou, A. A.
(2009).
Dynamic Head-Disk Interface Instabilities With Friction for Light Contact (Surfing) Recording. IEEE Transactions on Magnetics.
4966-4971.
-
Sawyer, W. G., & Polycarpou, A.
(2009).
2008 Proceedings of the STLE/ASME International Joint Tribology Conference, IJTC 2008: Welcome from the Chairs
-
Lee, C., & Polycarpou, A. A.
(2009).
APPLICATION OF ELASTIC-PLASTIC STATIC FRICTION MODEL TO ROUGH SURFACE WITH ASYMMETRIC ASPERITY DISTRIBUTION. 765-767.
-
Katta, R. R., Polycarpou, A. A., Hanchi, J. V., & Crone, R. M.
(2009).
ELASTIC/PLASTIC OBLIQUE IMPACT ANALYSIS FOR HEAD DISK INTERFACE OPERATIONAL SHOCK. 693-696.
-
Solzak, T. A., & Polycarpou, A. A.
(2009).
TRIBOLOGY OF COATINGS FOR USE IN OIL-LESS SWASHPLATE COMPRESSORS. 501-508.
-
De Mello, J., & Polycarpou, A. A.
(2009).
Abrasive Wear Mechanisms of Multi Component Ferrous Alloys Abraded by Soft, Fine Abrasive Particles. 388-389.
-
Vakis, A. I., Lee, S., & Polycarpou, A. A.
(2009).
Dynamic contact with friction of an ultra-low flying head-disk interface with thermal protrusion. 1-2.
-
Demas, N. A., Polycarpou, A. A., Polychronopoulou, K., & Rebholz, C.
(2009).
TRIBOLOGICAL BEHAVIOR OF CrN AND Al-Cr-N COATINGS. 769-771.
-
Ozkan, T., Naraghi, M., Polycarpou, A. A., & Chasiotis, I.
(2008).
Mechanical strength of pyrolytically stripped and functionalized heat treated vapor grown carbon nanofibers. 1108-1113.
-
De Mello, J. D., Binder, R., Demas, N., & Polycarpou, A.
(2008).
Tribological behaviour of a Si rich multifunctional DLC coating under real environments used in hermetical compressors
-
Nunez, E. E., Yeo, C., Katta, R. R., & Polycarpou, A. A.
(2008).
Effect of Planarization on the Contact Behavior of Patterned Media. IEEE Transactions on Magnetics.
3667-3670.
-
Shi, X. i., & Polycarpou, A. A.
(2008).
Investigation of contact stiffness and contact damping for magnetic storage head-disk interfaces. Journal of Tribology.
021901.
-
Yeo, C., & Polycarpou, A. A.
(2008).
Elastic contact model accounting for both asperity and substrate compliance with application to patterned media. 1121-1122.
-
Katta, R. R., Polycarpou, A. A., & Hanchi, J. V.
(2008).
Elastic/plastic contact mechanics-based analysis of hard disk drive media damage from slider corner impacts. 593-595.
-
Lee, K. M., & Polycarpou, A. A.
(2008).
Micro and nanoscale experiments and finite element studies of rail steels. 1061-1063.
-
Polychronopoulou, K., Rebholz, C., Theodorou, L., Boebel, K., Demas, N. G., & Polycarpou, A. A.
(2008).
Microstructure, mechanical and tribological properties of reactive magnetron sputtered titanium carbide coatings. 933-935.
-
Yu, N., Polycarpou, A. A., & Hanchi, J. V.
(2008).
Thermomechanical finite element analysis of impact-induced magnetic erasures in magnetic storage thin film media. 691-693.
-
Yeo, C., Sullivan, M., Lee, S., & Polycarpou, A. A.
(2008).
Friction force measurements and modeling in hard disk drives. IEEE Transactions on Magnetics.
157-162.
-
Lee, C., & Polycarpou, A. A.
(2006).
Experimental Investigation of Tripod Constant Velocity (CV) Joint Friction. SAE Technical Papers.
-
Lee, C. H., Solzak, T. A., & Polycarpou, A. A.
(2006).
Tribological investigation of grease used in automotive constant-velocity joints
-
Shi, X. i., & Polycarpou, A. A.
(2006).
Investigation of Contact Stiffness and Contact Damping for Magnetic Storage Head-Disk Interfaces. 843-854.
-
Suh, A. Y., & Polycarpou, A. A.
(2006).
Modeling of the Effect of Preferential Texturing on the Interfacial Forces in Sub-5 nm Ultra-Low Flying Head-Disk Interfaces. 899-908.
-
Demas, N. G., & Polycarpou, A. A.
(2006).
Tribological Investigation of Cast Iron Air-Conditioning Compressor Surfaces in CO2 Refrigerant. 17-23.
-
Bogy, D. B., & Polycarpou, A. A.
(2005).
Magnetic storage systems. 677.
-
Lee, K. M., & Polycarpou, A. A.
(2005).
Wear of conventional pearlitic and improved bainitic rail steels. Wear.
391-399.
-
Lee, S. C., & Polycarpou, A. A.
(2005).
Effect of hard-disk drive spindle motor vibration on dynamic microwaviness and flying-height modulation. Tribology International.
665-674.
-
Lee, S. C., & Polycarpou, A. A.
(2005).
Microtribodynamics of pseudo-contacting head-disk interfaces intended for 1 Tbit/in(2). IEEE Transactions on Magnetics.
812-818.
-
Suh, A. Y., & Polycarpou, A. A.
(2005).
Adhesive Contact Modeling of Ultra-Low Flying Head-Disk Interfaces With and Without Roughness Effects. 739-740.
-
Yu, N., Polycarpou, A. A., & Hanchi, J. V.
(2005).
Analysis of Impact-Induced Head Disk Interface Damage During Op-Shock. 741-742.
-
Lee, C., & Polycarpou, A. A.
(2005).
Experimental Verification of an Improved Elastic-Plastic Static Friction Model Including Roughness Effects. 347-348.
-
Lee, K. M., & Polycarpou, A. A.
(2005).
Micro/Nano Scale Wear Behavior of Pearlitic and Bainitic Rail Steels. 795-796.
-
Demas, N. G., & Polycarpou, A. A.
(2005).
Tribological Studies of Compressor Surfaces in the Presence of Carbon Dioxide Under Extreme Environmental Pressure Conditions. 121-122.
-
Suh, A. Y., & Polycarpou, A. A.
(2005).
Dynamic adhesive instability of sub-five nanometer head-disk interfaces. 139-146.
-
Shi, X., & Polycarpou, A. A.
(2004).
Adhesive effects on dynamic friction for unlubricated rough planar surfaces. 1157-1187.
-
Tayebi, N., Polycarpou, A. A., & Conry, T. F.
(2004).
Effects of the substrate on the determination of hardness of thin films by the nanoscratch and nanoindentation techniques: A comparative study for the cases of soft film on hard substrate and hard film on soft substrate. MRS Online Proceedings Library.
295-300.
-
Yu, N., & Polycarpou, A. A.
(2004).
Extracting summit roughness parameters from random Gaussian surfaces accounting for asymmetry of the summit heights. 1189-1195.
-
Meng, Y., Thomas, B. G., Polycarpou, A. A., Henein, H., & Prasad, A.
(2004).
Mold slag property measurements to characterize CC mold - Shell gap phenomena. Materials Science and Technology.
57-67.
-
Lee, K. M., Suh, A. Y., Demas, N. G., & Polycarpou, A. A.
(2004).
Surface and sub-micron sub-surface evolution of Al390-T6 undergoing tribological testing under submerged lubrication conditions in the presence of CO 2 refrigerant. 259-282.
-
Lee, S. C., & Polycarpou, A. A.
(2004).
Strategies to avoid head-disk instabilities due to adhesion in ultralow flying head-disk interfaces. IEEE Transactions on Magnetics.
3130-3135.
-
Shi, X. i., & Polycarpou, A. A.
(2004).
Adhesive Effects on Dynamic Friction for Unlubricated Rough Planar Surfaces. 1179-1208.
-
Yu, N., & Polycarpou, A. A.
(2004).
Extracting Summit Roughness Parameters From Random Gaussian Surfaces Accounting for Asymmetry of the Summit Heights. 1209-1215.
-
Lee, S., & Polycarpou, A. A.
(2004).
Microtribodynamics of Pseudo-Contacting Head-Disk Interfaces Intended for $Large{1 {
m Tbit}/{
m in}^{2}}$. 2-3.
-
Polycarpou, A. A., & Bhatia, C. S.
(2003).
American Society of Mechanical Engineers, Tribology Division, TRIB: Foreword
-
Polycarpou, A. A., Hsia, Y. T., & Suk, M.
(2003).
American Society of Mechanical Engineers, Tribology Division, TRIB: Introduction
-
Tayebi, N., & Polycarpou, A. A.
(2003).
Modeling the Effect of Surface Roughness on the Adhesion, Contact and Friction in Micro-Electro-Mechanical Systems (MEMS) Interfaces. 75-82.
-
Polycarpou, A. A., Hsia, Y. T., Suk, M., & Singh Bhatia, C.
(2002).
American Society of Mechanical Engineers, Tribology Division TRIB: Introduction
-
Suh, A. Y., Lee, S., & Polycarpou, A. A.
(2002).
Textured Sliders as Means to Reduce Adhesion in Ultra Low Flying Head Disk Interfaces. 51-55.
-
Suh, A. Y., & Polycarpou, A. A.
(2002).
Surface roughness characterization of disks intended for extremely high density recording. 1-2.
-
Lee, K. M., & Polycarpou, A. A.
(2002).
Transient and Steady State Dynamic Vibration Measurements of HDD. tu-p-16-01-tu-p-16-02.
-
Lee, S., & Polycarpou, A. A.
(2001).
Predicting Fly-Height Modulation and Contact Forces in Ultra-Low Flying Head-Disk Interfaces Using a Tri-State Switching Dynamic Contact Model. 27-35.
-
Polycarpou, A. A., & Suh, A.
(2001).
A model for adhesive forces in miniature systems. 331-338.
-
Polycarpou, A. A., & Etsion, I.
(1998).
Analytical approximations in modeling contacting rough surfaces. American Society of Mechanical Engineers (Paper).
1-6.
-
Polycarpou, A. A., & Etsion, I.
(1997).
Static friction of contacting real surfaces in the presence of sub-boundary lubrication. American Society of Mechanical Engineers (Paper).
-
Polycarpou, A. A., & Etsion, I.
(1997).
Comparison of the static friction subboundary lubrication model with experimental measurements on thin-film disks. 141-148.
-
Polycarpou, A. A., & Soom, A.
(1995).
Two-component mixed friction model for a lubricated line contact. American Society of Mechanical Engineers (Paper).
-
Polycarpou, A., & Soom, A.
(1992).
Transitions between sticking and slipping at lubricated line contacts. 139-148.
-
Xu, W., McAdams, D. A., & Polycarpou, A. A.
(2022).
Short Paper: An Initial Investigation of the Correlations Between the Quality of Engineering Assignments and Task-Independent Features
-
institutional repository document
-
Bashandeh, K., Lan, P., & Polycarpou, A. A.
(2021).
Tribology of High-performance PEEK-, PI-, and ATSP-based Self-lubricating Polymers Up to 300 oC
-
Bashandeh, K., Lan, P., & Polycarpou, A. A.
(2021).
Tribology of High-performance PEEK-, PI-, and ATSP-based Self-lubricating Polymers Up to 300 oC
-
patent
-
Gheisari, R., & Polycarpou, A. A.
(2022).
Phase change material compositions and methods for their use to lower surface friction and wear
-
Economy, J., Polycarpou, A., & Meyer, J.
(2017).
Polymer coating system for improved tribological performance
-
Polycarpou, A., Wobbe, D. G., & Boutaghou, Z.
(2004).
Disc drive having a suspension limiter for improved shock performance
-
Boutaghou, Z., Hanchi, J. V., Polycarpou, A., Pitchford, T. R., & Sannino, A. P.
(2003).
Method for constructing an ultra-low-flying-height slider
-
Polycarpou, A., Boutaghou, Z., Burbank, D. P., Gui, J., Hanchi, J. V., Stover, L. E., & Ryun, S. E.
(2003).
Slider for disc storage system
-
Polycarpou, A., Boutaghou, Z., & Burbank, D. P.
(2003).
Texture structure for optimizing head disc interface
-
Polycarpou, A., Hipwell, M. C., & Boutaghou, Z.
(2003).
Edge structure for slider-disc interface and method of manufacture therefore
-
Hipwell, M. C., Polycarpou, A., & Boutaghou, Z.
(2002).
Edge contact protection feature for a disc drive head
-
Polycarpou, A., Boutaghou, Z. E., Hanchi, J. V., Segar, P. R., Wobbe, D. G., & Hipwell, M. C.
(2002).
Slider for a data storage device with head disc interface for contact starts and stops
-
Boutaghou, Z. E., Hanchi, J. V., Polycarpou, A., Pitchford, T. R., & Sannino, A. P.
(2002).
Enhanced durability ultra-low-flying-height sliders
-
Boutaghou, Z., Schaenzer, M. J., Liners, W. O., Hoehn, J. W., & Polycarpou, A.
(2001).
Burnishing head with fly height control spacer
-
Boutaghou, Z. E., Hanchi, J. V., Polycarpou, A., Pitchford, R., & Sannino, A. P.
(2001).
Enhanced durability ultra-low-flying-height sliders
-
Gui, J., Marchon, B. J., Burbank, D. P., Hoehn, J. W., Berkowitz, J. K., Sundaram, R., ... Tang, H.
(2001).
Slider having air bearing surface which includes pads for disk storage system
-
Gui, J., Marchon, B. J., Burbank, D. P., Hoehn, J. W., Berkowitz, J. K., Sundram, R., ... Tamg, J.
(1999).
Slider Having Air Bearing Surface which Includes Pads for Disk Storage System
-
Gheisari, R., & Polycarpou, A. A.
(2022).
Phase change material compositions and methods for their use to lower surface friction and wear
editor of
-
book
-
Polycarpou, A. A.
(2003).
Proceedings of the 2003 Magnetic Storage Symposium Frontiers of Magnetic Hard Disk Drive Tribology and Technology
Polycarpou, A. A., Suk, M., & Hsia, Y. (Eds.),
-
Polycarpou, A. A.
(2002).
Frontiers of Magnetic Hard Disk Drive Tribology and Technology : Proceedings of the 2002 Magnetic Storage Symposium : Presented at ASME/STLE Joint International Tribology Conference ; October 27-30, 2002, Cancun, Mexico
Polycarpou, A. A., Suk, M., Hsia, Y., & Bhatia, C. S. (Eds.),
-
Polycarpou, A. A., & Bhatia, C. S.
(2001).
Proceedings of the Symposium on Nanotribology and Nanotechnology for 1 Tbit/in2
Polycarpou, A. A., & Bhatia, C. S. (Eds.),
-
Bhatia, C. S., Polycarpou, A. A., & Menon, A. K.
(2000).
Proceedings of the Symposium on Interface Tribology Towards 100 Gbit/in2 and Beyond Presented at ASME/STLE Jt. International Tribology Conference & Exhibition, October 1-4, 2000, Seattle, Washington
Bhatia, C. S., Polycarpou, A. A., & Menon, A. K. (Eds.),
Amer Society of Mechanical.
-
Bhatia, C. S., Polycarpou, A. A., & Menon, A. K.
(1999).
Proceedings of the Symposium on Interface Tribology Towards 100 Gbit/in2
Bhatia, C. S., Polycarpou, A. A., & Menon, A. K. (Eds.),
-
Polycarpou, A. A.
(2003).
Proceedings of the 2003 Magnetic Storage Symposium Frontiers of Magnetic Hard Disk Drive Tribology and Technology
Polycarpou, A. A., Suk, M., & Hsia, Y. (Eds.),
Research
principal investigator on
- IUSE/PFE:RED A&I: Soft Wired Teaming for Creating Opportunities to Revolutionize the Preparation of Students (TCORPS) through Building, Testing and Sharing Pedagogical Improvem awarded by Directorate for Engineering - (Arlington, Virginia, United States) 2020 - 2023
- Collaborative Research: AccelNet: An International Network of Networks for Well-being in the Built Environment awarded by National Science Foundation - (Arlington, Virginia, United States) 2019 - 2022
- Collaborative Research: Adaptive, Multi-Layered Fenestration Elements for Optimum Building Energy Performance and Occupant Comfort awarded by National Science Foundation - (Arlington, Virginia, United States) 2019 - 2021
- RPA-16-10732: High Temperature Tribological Performance of Ni Alloys Under Helium Environment for Very High Temperature Gas Cooled Reactors (VHTRs) awarded by United States Department of Energy - (Washington D.C., District of Columbia, United States) 2016 - 2019
Teaching
teaching activities
- MEEN381 Seminar Instructor
- MEEN454 Tribology-mech Interface Desgn Instructor
- MEEN475 Materials In Design Instructor
- MEEN489 Sptp: Tribology Instructor
- MEEN654 Tribology-mech Interface Desgn Instructor
- MEEN684 Professional Internship Instructor
- MEEN684 Professional Internship Instructor
- MEEN685 Directed Studies Instructor
- MEEN689 Sptp: Tribology Instructor
- MEEN691 Research Instructor
Background
education and training
- Ph.D. in Mechanical Engineering, University at Buffalo, State University of New York - (Buffalo, New York, United States) 1994
- M.S. in Mechanical Engineering, University at Buffalo, State University of New York - (Buffalo, New York, United States) 1992
- B.S. in Mechanical Engineering, University at Buffalo, State University of New York - (Buffalo, New York, United States) 1990
awards and honors
- Traditional Fulbright Scholarship, conferred by Council for International Exchange of Scholars - (Washington D.C., District of Columbia, United States), 2008
- Fellow, conferred by American Society of Mechanical Engineers - (New York, New York, United States), 2008
- Edmond E. Bisson Award, conferred by Society of Tribologists and Lubrication Engineers - (Park Ridge, Illinois, United States), 2007
- Faculty Early Career Development (CAREER) Program, conferred by National Science Foundation - (Arlington, Virginia, United States), 2003
- Burt L Newkirk Award, conferred by American Society of Mechanical Engineers - (New York, New York, United States), 2001
Contact
first name
- Andreas
has last name
- Polycarpou
mailing address
-
Texas A&M University
Engineering Academic Coordination
3123 TAMU
College Station, TX 77843-3123
USA
Other
In the News
- apolycarpou@tamu.edu