Trans Tech Publications, Ltd.
Publisher
Publications
publisher of
-
An Efficient Method to Completely Remove Catalyst Particles from HiPCO Single Walled Carbon Nanotubes.
Journal of Nano Research.
53:64-75.
2018
-
Memory Loss in a Tantalum Oxide Memristor.
7th Forum on New Materials - Part A.
99:94-101.
2016
-
Powder Metallurgy Ti-6Al-4V Alloy with Wrought-Like Microstructure and Mechanical Properties by Hydrogen Sintering.
ENGINEERING PLASTICITY AND ITS APPLICATIONS FROM NANOSCALE TO MACROSCALE, PTS 1 AND 2.
704:3-14.
2016
-
The Experimental Measurement on the Throwing Power of Sacrificial Anode Cathodic Protection for Concrete Piles in Natural Sea Water.
ADVANCED ENGINEERING MATERIALS II, PTS 1-3.
1125:350-354.
2015
-
Utilization of Variable Resistor for Improvement of Impressed Current Cathodic Protection System on Reinforced Concrete Structures.
ADVANCED ENGINEERING MATERIALS II, PTS 1-3.
1125:365-369.
2015
-
High and Low Speed Impact Characteristics of Nanocomposites.
ADVANCED ENGINEERING MATERIALS II, PTS 1-3.
1105:62-66.
2015
-
Effect of Cathodic Protection Systems with Zn-Mesh Sacrificial Anodes on Reinforced Concrete Structures in an Accelerated Marine Environment.
ADVANCED ENGINEERING MATERIALS II, PTS 1-3.
800:365-374.
2013
-
Experimental Study on the Effect of Cathodic Protection System for Concrete Slab Specimens with Zn-Mesh Sacrificial Anode in Marine Environment.
ADVANCED ENGINEERING MATERIALS II, PTS 1-3.
785-786:264-272.
2013
-
Improvements in the Performance of Impressed Current Cathodic Protection System with Variable Resistor at Various Environmental Conditions.
Applied Mechanics and Materials.
376:288-293.
2013
-
Lifetime Prediction of Fire Extinguishing Pipeline by Means of Extreme Value Statistics.
Applied Mechanics and Materials.
376:60-64.
2013
-
Multifunctional Sensors for Monitoring Corrosion of Mortar Specimens.
ADVANCED ENGINEERING MATERIALS II, PTS 1-3.
753-755:2107-2112.
2013
-
Three Year Performance of Sacrificial Anode Cathodic Protection System in the Reinforced Concrete Bridge Structures.
ADVANCED ENGINEERING MATERIALS II, PTS 1-3.
753-755:467-475.
2013
-
Characteristic of CP Potential for Concrete Pile Specimen with Hybrid CP.
ADVANCED ENGINEERING MATERIALS II, PTS 1-3.
685:3-7.
2013
-
Simulation of Friction Stir Processing with Internally Cooled Tool.
ADVANCED ENGINEERING MATERIALS II, PTS 1-3.
445:560-565.
2012
-
Studies on the Lapping of Polycrystalline Diamond Compact (PDC).
ADVANCED ENGINEERING MATERIALS II, PTS 1-3.
325:495-501.
2011
-
Lapping of Polycrystalline Diamond Compact (PDC).
ADVANCED ENGINEERING MATERIALS II, PTS 1-3.
126-128:469-474.
2010
-
Multi-Scale Modeling of Texture Evolution in Beryllium and Zirconium during Equal Channel Angular Extrusion.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
633-634:483-510.
2009
-
On the Cyclic Stability and Fatigue Performance of Ultrafine-Grained Interstitial-Free Steel under Mean Stress.
ENGINEERING PLASTICITY AND ITS APPLICATIONS FROM NANOSCALE TO MACROSCALE, PTS 1 AND 2.
378-379:39-52.
2008
-
Characterization of High Strength Alloy Formed by Ion Irradiation of Metallic Glasses.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
561-565:1737-1740.
2007
-
Fabrication of Cermet Nuclear Fuels Designed for the Transmutation of Transuranic Isotopes.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
561-565:1733-1736.
2007
-
Finite Element Modeling of Superplastic Forming in the Presence of Back Pressure.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
551-552:257-262.
2007
-
On The Stability of Superplastic Deformation Using Nonlinear Wavelength Analysis.
ENGINEERING PLASTICITY AND ITS APPLICATIONS FROM NANOSCALE TO MACROSCALE, PTS 1 AND 2.
344:47-54.
2007
-
Superplastic Deformation of Magnesium Alloy AZ31 under Biaxial Loading Condition.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
551-552:219-224.
2007
-
Experimental Thermal Analysis of Friction Stir Processing.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
539-543:3801-3806.
2007
-
Challenges in Joining Advanced Ceramic Materials: Interface Formation of Ceramic/Metal High-Temperature Brazes.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
502:7-12.
2005
-
Correlation between the Microstructure and Forces Generated during Friction Stir Processing of AA5052.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
475-479:3043-3046.
2005
-
Effect of State of Stress on the Cavitation Behavior of Al 5083 Superplastic Material.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
475-479:2931-2936.
2005
-
Constitutive Modeling of Deformation-Induced Anisotropy in Superplastic Materials.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
447-448:165-170.
2004
-
Multi-Scale Analysis of Failure during Superplastic Deformation.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
447-448:105-110.
2004
-
Recent Research on Damage Development in SiC/Ti Continuous Fiber Metal Matrix Composites.
ENGINEERING PLASTICITY AND ITS APPLICATIONS FROM NANOSCALE TO MACROSCALE, PTS 1 AND 2.
120-121:257-284.
1996
-
Anisotropy and Transient Effects in Superplastic Deformation.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
170-172:583-588.
1994
-
Continuum Modelling of Interfacial Decohesion.
MECHATRONIC SYSTEMS AND MATERIALS: MECHATRONIC SYSTEMS AND ROBOTICS.
35-36:287-302.
1993
-
Micromechanical Modeling of Precipitation Hardened NiTiHf.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
147-156.
2018
-
A Case Study on Metal-Ceramic Interfaces: Wetting of Alumina by Molten Aluminum.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
185-189.
2018
-
Influence of H-Content on Thermo-Mechanical Properties of NiAl Alloys.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
224-228.
2018
-
Constitutive Modeling of Near-Equiatomic NiTi Shape Memory Alloys Considering Composition and Heat Treatment.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
78-84.
2016
-
Shockwave Response of Polymer and Polymer Nanocomposites.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
64-69.
2016
-
Shape Memory Effect and Superelasticity in Single Crystals of High-Strength Ferromagnetic Alloys.
ADVANCED ENGINEERING MATERIALS II, PTS 1-3.
15-22.
2014
-
The Study on the Cathodic Protection Effect of the ICCP Anodes with Exposed Conditions.
Applied Mechanics and Materials.
218-221.
2014
-
Research on Kinematics Joint Type Mobile Robot Platform for Thin Coal Seam Inspection.
Applied Mechanics and Materials.
818-821.
2014
-
Effect of Tensile Twinning on Low Temperature Shear Formability of Mg-3Al-1Zn Alloy.
ADVANCED ENGINEERING MATERIALS II, PTS 1-3.
108-113.
2014
-
Prediction of Flow Stress Anisotropy and Tension Compression Asymmetry of Hot Rolled AZ31B Mg Alloy.
ADVANCED ENGINEERING MATERIALS II, PTS 1-3.
178-184.
2014
-
Finite Element Analysis of Precipitation Effects on Ni-Rich NiTi Shape Memory Alloy Response.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
65-71.
2014
-
Molecular Dynamics Simulations of Piezoelectric Materials for Energy Harvesting Applications.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
54-64.
2014
-
Low-Power On-The-Fly Reconfigurable Iterative MIMO Detection and LDPC Decoding Design.
Applied Mechanics and Materials.
1825-1829.
2014
-
Rate Allocation Algorithm with Successive Refinement in Peer-to-Peer Networks.
Applied Mechanics and Materials.
2200-2203.
2014
-
Sustainability Considerations for PCC Pavement Design and Construction.
ADVANCED ENGINEERING MATERIALS II, PTS 1-3.
147-159.
2013
-
Artificial Neural Network Model: Prediction of Mechanical Properties in Beta-Titanium Biomaterial.
Applied Mechanics and Materials.
40-44.
2013
-
On Gradient Elasticity and Discrete Peridynamics with Applications to Beams and Plates.
ADVANCED ENGINEERING MATERIALS II, PTS 1-3.
145-154.
2013
-
Radio-Frequency Sensors for Nondestructive Evaluation of Materials.
ADVANCED ENGINEERING MATERIALS II, PTS 1-3.
765-768.
2013
-
The Characteristic Parameter Estimation of Low Temperature Target Weak Signal Based on VanderPol-Duffing System.
Applied Mechanics and Materials.
706-710.
2013
-
An Overview of the Effect of Nb in Strengthening Castrip® Steel.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
559-562.
2013
-
Tissue Cutting Mechanics and Applications for Needle Core Biopsy and Guidance.
Applied Mechanics and Materials.
13-22.
2013
-
High Temperature Stability of Oxygen Functionalized Epitaxial Graphene/Metal Contact Interfaces.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
145-148.
2013
-
Tension - Compression Asymmetry in Co49Ni21Ga30 High-Temperature Shape Memory Alloy Single Crystals.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
82-86.
2013
-
Microstructure and Electrical Properties of the (Ba1-xCax)(Ti0.96Zr0.02Sn0.02)O3 Ceramics.
ADVANCED ENGINEERING MATERIALS II, PTS 1-3.
283-286.
2012
-
Superplastic Forming Response of a Friction Stir Processed Mg Alloy Sheet – A Numerical Approach.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
192-197.
2012
-
Supercapacitor Fabrication by Titanium Alloy.
ADVANCED ENGINEERING MATERIALS II, PTS 1-3.
894-898.
2012
-
Electrical Characterization of the Graphene-SiC Heterojunction.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
641-644.
2012
-
Plasma-Based Chemical Modification of Epitaxial Graphene.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
657-660.
2012
-
Positive Temperature Coefficient SiC PiN Diodes.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
981-984.
2012
-
Simulation of Friction Stir Processing with Internally Cooled Tool.
ADVANCED ENGINEERING MATERIALS II, PTS 1-3.
560-565.
2012
-
Deformation Temperature Effects on Microstructure and Texture Evolution in High Strain Rate Extrusion-Machining of Mg-AZ31B.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
52-55.
2011
-
Study on Phase Structure and Electrical Properties of La-Doped (K0.5Na0.5)0.94Li0.06NbO3 Ceramics.
ADVANCED ENGINEERING MATERIALS II, PTS 1-3.
1127-1130.
2011
-
Use of Cork Waste as Biosorbent for Hexavalent Chromium.
ADVANCED ENGINEERING MATERIALS II, PTS 1-3.
497-500.
2011
-
Growth of 4H- and 3C-SiC Epitaxial Layers on 4H-SiC Step-Free Mesas.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
119-122.
2011
-
Observations on C-Face SiC Graphene Growth in Argon.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
789-792.
2011
-
High Air Pressure in MQL Deep Hole Drilling Workpiece Temperature.
ADVANCED ENGINEERING MATERIALS II, PTS 1-3.
1732-1736.
2011
-
Fabrication and Molding Testing of the Blazed Gratings for Microoptics Applications.
ENGINEERING PLASTICITY AND ITS APPLICATIONS FROM NANOSCALE TO MACROSCALE, PTS 1 AND 2.
396-400.
2010
-
Nitriding of a Nb-Microalloyed Thin Strip Cast Steel at 525°C.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
106-109.
2010
-
Orthonormality and Spectral Analysis for Robotics and Astrodynamics.
MECHATRONIC SYSTEMS AND MATERIALS: MECHATRONIC SYSTEMS AND ROBOTICS.
392-404.
2010
-
EBSD Characterization of Pure Iron Deformed by ECAE.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
1995-2000.
2010
-
Prediction of Burr Formation in Fabricating MEMS Components by Micro End Milling.
ADVANCED ENGINEERING MATERIALS II, PTS 1-3.
247-250.
2009
-
The Effect of Texture on the Fatigue Properties of Ultrafine-Grained Interstitial-Free Steel.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
864-869.
2008
-
Evaluation of Reshaping Methods for Multi-Pass Equal Channel Angular Extrusion.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
63-67.
2008
-
Discrete Dislocation Modeling of Plastic Flow Processes.
ENGINEERING PLASTICITY AND ITS APPLICATIONS FROM NANOSCALE TO MACROSCALE, PTS 1 AND 2.
31-38.
2007
-
Equal Channel Angular Extrusion (ECAE) of Ni-Ti Based Shape Memory Alloy Systems.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
3195-3200.
2007
-
Recrystallized Grain Size in Severely Deformed Pure Copper.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
349-354.
2006
-
Mechanical Properties of ECAE Nanocrystalline Copper and Nickel.
Journal of Metastable and Nanocrystalline Materials.
183-186.
2005
-
Tribological Characterization of Carbide-Derived Carbon Layers on Silicon Carbide for Dry Friction Applications.
ENGINEERING PLASTICITY AND ITS APPLICATIONS FROM NANOSCALE TO MACROSCALE, PTS 1 AND 2.
465-468.
2004
-
An Interface Crack between a Functionally Graded Coating and a Homogeneous Substrate under Thermo-Mechanical Loading.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
601-606.
2003
-
Molecular Dynamics Simulations of Glass Formation and Crystallization in Binary Liquid Metals.
Journal of Metastable and Nanocrystalline Materials.
181-186.
2003
-
Discrete Dislocation Plasticity.
ENGINEERING PLASTICITY AND ITS APPLICATIONS FROM NANOSCALE TO MACROSCALE, PTS 1 AND 2.
13-24.
2003
-
A Rate-Dependent Model for Predicting Damage Accumulation in Viscoelastic Laminated Composites.
ENGINEERING PLASTICITY AND ITS APPLICATIONS FROM NANOSCALE TO MACROSCALE, PTS 1 AND 2.
25-34.
2001
-
A Thermodynamic Framework for the Superplastic Response of Materials.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
261-272.
2001
-
Synthesis of Novel Metal Phosphonate Complex Structures through Soft Chemistry.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS.
115-124.
1994