Enhanced Dielectric Strength and Capacitive Energy Density of Cyclic Polystyrene Films.
Academic Article
Overview
Research
Identity
Additional Document Info
Other
View All
Overview
abstract
The maximum capacitive energy stored in polymeric dielectric capacitors, which are ubiquitous in high-power-density devices, is dictated by the dielectric breakdown strength of the dielectric polymer. The fundamental mechanisms of the dielectric breakdown, however, remain unclear. Based on a simple free-volume model of the polymer fluid state, we hypothesized that the free ends of linear polymer chains might act as "defect" sites, at which the dielectric breakdown can initiate. Thus, the dielectric breakdown strength of cyclic polymers should exhibit enhanced stability in comparison to that of their linear counterparts having the same composition and similar molar mass. This hypothesis is supported by the 50% enhancement in the dielectric breakdown strength and 80% enhancement in capacitive energy density of cyclic polystyrene melt films in comparison to corresponding linear polystyrene control films. Furthermore, we observed that cyclic polymers exhibit a denser packing density than the linear chain melts, an effect that is consistent with and could account for the observed property changes. Our work demonstrates that polymer topology can significantly influence the capacitive properties of polymer films, and correspondingly, we can expect polymer topology to influence the gas permeability, shear modulus, and other properties of thin films dependent on film density.
