Reductive Dechlorination of Tetrachloroethylene by Green Rusts Modified with Copper
Academic Article
Overview
Research
Identity
Additional Document Info
Other
View All
Overview
abstract
Reductive dechlorination of tetrachloroethylene (PCE) by green rust modified with copper (GR(Cu)) was investigated using a batch reactor system. Four different forms of GRs (GR-Cl, GR-SO4, GR-CO3, and GR-F) were synthesized by partial air oxidation of Fe(OH)2 and used in reductive dechlorination. The addition of Cu(II) into GRs produced 100-nm particles on the surface of GRs, which were considered to be metallic Cu and transformed a portion of GR to magnetite. Concentration of Fe(II) in the liquid phase increased and concentration of Fe(II) in the solid phase decreased during the modification process and the extent of these changes was dependent on the amount of Cu(II) added. The most reactive of the modified GRs was GR-F(Cu), which reacted with PCE at a rate that was 80 times faster than that of GR-Cl(Cu). The rate of PCE degradation by GR-F(Cu) was strongly dependent on pH with higher rates at higher pH over the range of pH 7.5-11. Increasing concentrations of Cu(II) over the range of 0 to 5 mM increased rate constants. The rate of dechlorination of PCE by GR-F(Cu) showed surface saturation behavior with respect to PCE concentration. 2010 Springer Science+Business Media B.V.
