Scaling of detonation velocity in cylinder and slab geometries for ideal, insensitive and non-ideal explosives
Academic Article
Overview
Research
Identity
Additional Document Info
Other
View All
Overview
abstract
Experiments were conducted to characterize the detonation phase-velocity dependence on charge thickness for two-dimensional detonation in condensed-phase explosive slabs of PBX 9501, PBX 9502 and ANFO. In combination with previous diameter-effect measurements from a cylindrical rate-stick geometry, these data permit examination of the relative scaling of detonation phase velocity between axisymmetric and two-dimensional detonation. We find that the ratio of cylinder radius ($R$) to slab thickness ($T$) at each detonation phase velocity ($D_{0}$) is such that$R(D_{0})/T(D_{0})<1$. The variation in the$R(D_{0})/T(D_{0})$scaling is investigated with two detonation shock dynamics (DSD) models: a lower-order model relates the normal detonation velocity to local shock curvature, while a higher-order model includes the effect of front acceleration and transverse flow. The experimentally observed$R(D_{0})/T(D_{0})$(${<}1$) scaling behaviour for PBX9501 and PBX9502 is captured by the lower-order DSD theory, revealing that the variation in the scale factor is due to a difference in the slab and axisymmetric components of the curvature along the shock in the cylindrical geometry. The higher-order DSD theory is required to capture the observed$R(D_{0})/T(D_{0})$(${<}1$) scaling behaviour for ANFO. An asymptotic analysis of the lower-order DSD formulation describes the geometric scaling of the detonation phase velocity between the cylinder and slab geometries as the detonation phase velocity approaches the ChapmanJouguet value.
