Full-Density Fused Deposition Modeling Dimensional Error as a Function of Raster Angle and Build Orientation: Large Dataset for Eleven Materials Academic Article uri icon

abstract

  • This paper describes the collection of a large dataset (6930 measurements) on dimensional error in the fused deposition modeling (FDM) additive manufacturing process for full-density parts. Three different print orientations were studied, as well as seven raster angles ( 0 ∘ , 15 ∘ , 30 ∘ , 45 ∘ , 60 ∘ , 75 ∘ , and 90 ∘ ) for the rectilinear infill pattern. All measurements were replicated ten times on ten different samples to ensure a comprehensive dataset. Eleven polymer materials were considered: acrylonitrile butadiene styrene (ABS), polylactic acid (PLA), high-temperature PLA, wood-composite PLA, carbon-fiber-composite PLA, copper-composite PLA, aluminum-composite PLA, high-impact polystyrene (HIPS), polyethylene terephthalate glycol-enhanced (PETG), polycarbonate, and synthetic polyamide (nylon). The samples were ASTM-standard impact-testing samples, since this geometry allows the measurement of error on three different scales; the nominal dimensions were 3 . 25 mm thick, 63 . 5 mm long, and 12 . 7 mm wide. This dataset is intended to give engineers and product designers a basis for judging the accuracy and repeatability of the FDM process for use in manufacturing of end-user products.

published proceedings

  • Journal of Manufacturing and Materials Processing

altmetric score

  • 0.5

author list (cited authors)

  • Messimer, S., Pereira, T., Patterson, A., Lubna, M., & Drozda, F

citation count

  • 19

complete list of authors

  • Messimer, Sherri||Pereira, Tais||Patterson, Albert||Lubna, Maliha||Drozda, Fabiano

publication date

  • January 2019