Dissolution Kinetics of Cubic Tricalcium Aluminate Measured by Digital Holographic Microscopy.
Academic Article
Overview
Identity
Additional Document Info
Other
View All
Overview
abstract
In situ digital holographic microscopy is used to characterize the dissolution flux of polycrystalline cubic tricalcium aluminate (C3A-c). The surface dissolves at rates that vary considerably with time and spatial location. This implies a statistical distribution of fluxes, but an approximately steady-state median rate was obtained by using flowing solutions and by reducing the water activity in the solution. The dissolution flux from highly crystalline C3A-c depends on the water activity raised to an empirically derived exponent of 5.2 and extrapolates to a median flux of - 2.1 mol m-2 s-1 in pure water with an interquartile range of 3.2 mol m-2 s-1. The flux from a less crystalline source of C3A-c has an empirical water activity exponent of 4.6 and an extrapolated median flux of only -1.4 mol m-2 s-1 in pure water with an interquartile range of 1.9 mol m-2 s-1. These data suggest that the bulk dissolution rate of C3A-c can vary by at least 30% from one source to another and that variability in the local rate within a single material is even greater because of the heterogeneous spatial distribution of structural characteristics (i.e., degree of crystallinity, chemical impurities, and defects).
