Tribological Properties of Ion Implanted Amorphous Fe50Ti50 Films Academic Article

abstract

• ABSTRACTA surface layer of Fe50Ti50 on AISI 304 stainless steel was produced by ion beam mixing a Fe-Ti multilayer structure. Subsequently, the layer was implanted with C, N, or C+N ions. The dry sliding properties of these surfaces were tested using a ceramic pin as a rider in pin-on-disc measurements. Implantations produced significant improvements in the surface friction and wear properties. Samples implanted with C or C+N showed good tribological properties even under conditions where the Herzian peak pressure exceeded the yield strength of the substrate. As a result of different treatments the appearance of the wear tracks examined with a scanning electron microscope was also changed.

authors

• Nastasi, Michael

published proceedings

• MRS Advances

author list (cited authors)

• Hirvonen, G., Nastasi, M., & Mayer, J. W.

citation count

• 7

complete list of authors

• Hirvonen, G-P||Nastasi, M||Mayer, JW

publication date

• January 1987

publisher

• Springer Nature  Publisher

published in

• MRS Advances  Journal

keywords

• 40 Engineering
• 4003 Biomedical Engineering

Digital Object Identifier (DOI)

• 10.1557/proc-93-335

start page

• 335

volume

• 93

URL

• http://dx.doi.org/10.1557/proc-93-335