Experimental study and Taguchi analysis on LED cooling by thermoelectric cooler integrated with microchannel heat sink
- Additional Document Info
- View All
© 2019 Elsevier Ltd Effective thermal management is crucial for light-emitting diodes (LED). Thermoelectric cooler (TEC) and microchannel heat sink (MHS) have been demonstrated to be effective for thermal management of LED. However, neither the combination of these two methods, nor the dominant factors which could be effectively adjusted to control the LED temperature, have been reported. In this study, a cooling device integrating TEC and water-cooled microchannel heat sink (WMHS) is proposed to improve the thermal management of high-power LED headlights. The start-up performance of the proposed device, LED + TEC + WMHS, was evaluated and compared with three different systems, namely LED + WMHS, LED + AHS (air-cooled heat sink), and LED + TEC + AHS. Experimental results have demonstrated the best performance of the LED + TEC + WMHS device. Orthogonal experiments based on the Taguchi method were conducted to reveal dominant factors among four variables, including TEC current, water inlet temperature, water flow velocity, and ambient temperature. The results show that effects of all the factors were significant while the TEC current has most important influence on the performance. The variation of the thermal management performance with the levels of the factors were investigated. The LED temperature was only 60.0 °C even at severe working conditions (Ta = 80 °C, Ti = 55 °C) and moderate cooling input (ITEC = 2 A, u = 0.49 m/s), indicating great thermal management performance of the proposed method. Choosing a cooling system and adjusting the factor levels for different applications were recommended.
author list (cited authors)
Lin, X., Mo, S., Jia, L., Yang, Z., Chen, Y., & Cheng, Z.